profile extruder used for sale

Key data: 100 mm, 160 mm, 115 mm

Profile bending machine model PP100 Output shafts 100 mm fully hydraulic operated lower shafts motion independent pyramid pinch -all the 3 shafts driven with gear unit and hydraulic motor -lateral correctors left/right for guiding and align the profile, -Set of rollers complete with extra rollers to seat and bend the various shape of profiles. -7 set of rollers for pipe bending from 1,5” to 4,5” inch ( see photo in enclosed ) -Centralized control panel electric with digital position readout -Safety & emergency installation -voltage 3ph 380/50 -10 Hp -capacity chart in enclosed

A Schüco roll crimping machine for joining aluminum half-shells with polyamide insulating bars in thermally broken profiles is available. Profile throughput speed: approx. 34m/min, max. profile installation depth: 250mm, max. profile height: 400mm, max. insulating bar spacing: 300mm, machine dimensions X/Y/Z: approx. 900mm/900mm/1650mm, weight: approx. 750kg. Including infeed and outfeed. Documentation available. An on-site inspection is possible.

Inv. Num. : 9032 Type: Mec3000 Producer: Simec Created: 2019 Parameters: Switch-on hours: 9365 h Input length of the material: 6000–7000 mm. Parting diameter: 12–100 mm. Output length: 50–2000 mm.

Profile steel shears, profile shears, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shears -Manufacturer: Mubea, hydraulic profile steel shears type HPSN 350 -Drive: hydraulic -Pressure force: 35 tons -Equipment: large support table with stops for punching -Punching -scissors -Cut -Notch -various punches and dies -Dimensions: 1460/1700/H1690 mm -Weight: 1080kg

Modular unit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine, profile holder edge banding machine -Manufacturer: Homag, profile holder from edge banding machine BRANDT KM 35 -Individual components: see photos -Dimensions: 665/540 / H375 mm -Weight: 30 kg

Profile edge grinding and milling machine, edge grinding machine, edge grinder, grinding machine -with: copying device -Equipment: 1 grinding head -Power: 1.1 kW -Speed: 500-1500 rpm -Dimensions: 1200/1420/H1520 mm -Weight: 656kg Compact linear milling and grinding machine for any profile on strips and panel edges. Extremely short changeover times to a stationary grinding machine. Corner processing on MDF and solid wood workpieces with different radii (R = 1 to R = 30 mm) and corner angles. Manual creation of corner angles from 25 to 170 degrees. The grinding process for corner processing takes place in one clamping (approx. 10 seconds).

Profile edge grinding and milling machine, edge grinding machine, edge grinder, grinding machine -with copier -2x: milling heads -Power: 1.5 kW -Speed: 3000-6000 rpm -1x: grinding head -Power: 1.1 kW -Speed: 500-1500 rpm -Milling and grinding heads in thickness: adjustable -Max. Workpiece thickness: 40 mm -Max. Corner radius: 40 mm -Dimensions: 1200/1600/H1520 mm -Weight: 782 kg

Pressure zone turret, softforming interchangeable profiles for softforming machines, double-end tenoners, edging machines, scoring motor, chipper motor, milling motor for edging machines -HOMAG softforming interchangeable profiles for softforming profiles can be quickly converted to straight edges -with heavy leadership -laterally movable -with counter -HOMAG milling unit for joint milling -with heavy dovetail guide -1x engines Perske -Motor type: -Power: 3.0/4.4 kW -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 2880/5880 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1800/1400/H1300 mm -Weight: 712 kg

Profile scraper unit, profile scraper, flat scraper unit, finishing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, scraper for edge processing machine -HOMAG finishing unit allows you to smooth the milled edges for optimal appearance of the edge overhang -with scanning of 2 sides each -scraping blade from above and below -Quantity: 1 piece available -Dimensions: 500/450/H650 mm -Weight: 60 kg

Pressure zone turret, softforming interchangeable profiles for softforming machines, double-end tenoners, edging machines, scoring motor, chipper motor, milling motor for edging machines -HOMAG softforming interchangeable profiles for softforming profiles can be quickly converted to straight edges -with heavy leadership -laterally movable -with counter -HOMAG milling unit for joint milling -with heavy dovetail guide -1x engines Perske -Motor type: -Power: 3.0/4.4 kW -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 2860/5860 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1800/1400/H1300 mm -Weight: 712 kg

Pressure zone turret, softforming interchangeable profiles for softforming machines, double-end tenoners, edging machines, scoring motor, chipper motor, milling motor for edging machines -HOMAG softforming interchangeable profiles for softforming profiles can be quickly converted to straight edges -with heavy leadership -laterally movable -with counter -Dimensions: 1300/780/H620 mm -Weight: 260 kg

Profile steel shears, profile shears, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shears, punching and notching machine -Manufacturer: Mubea, profile steel shear punching and notching machine type HIW 600 -Pressure force: 60 to -Applications: punching, shearing, cutting, notching -Punching: Throat depth 260 mm -Accessories: incl. punching tool, see photos -Dimensions: 1470/960/H2140mm -Weight: 1283 kg

Profile scraper unit, profile scraper, flat scraper unit, finishing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, scraper for edge processing machine -Manufacturer: OTT, profile scraper from edge banding machine type U206 -Quantity: 1 piece available -Dimensions: 460/430/H560 mm -Weight: 57 kg

Profile steel shear, profile shear, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shear -Manufacturer: Mubea, hydraulic profile steel shear type HIW1000 -Drive: hydraulic -Pressure force: 100 tons -Equipment: large support table with stops for die-cutting, various stamps and dies -Production: Punching, shearing, cutting, notching -Dimensions: 2360/760/H1800 mm -Weight: 2700 kg

Manufacturer: De Stefani, Type: MVT 3500, Year: 2008, Monting of the machine: 3 X Profilschleifen, Program: yes, Axis control: no, Work piece width min-max mm: 60, Min.-max. workpiece height in mm: 80, Work piece length min-max mm: 250, Sanding hight mm: 80, Schleifaggregate rechts : 3, Abrasive belts at top: 3, Monting of the machine: 3 X Profilschleifen, Chain width mm: yes, Monting of the machine: ca.1,5, Unit 1 tiltable: yes, Aggregat 1 kW: ca.1,5, Unit 2 slewable: yes, Aggregat 2 kW: ca.1,5, Unit 3 slewable: yes, Aggregat 3 kW: ca.1,5, Unit 9 slewable: 3, Shoes electr. controlled: yes, Constant table hight: yes, Machine length: ca.4000, Year :2008

Manufacturer: Tagliabue, Type: PS 40 60, Year: 2001, Control: Siemens, Control: Siemens, Work piece width min-max mm: 20-350, Min.-max. workpiece height in mm: 10-60, Work piece length min-max mm: 450, Sanding hight mm: 60, Schleifaggregate links : 3, Schleifaggregate rechts : 3, Transverse sanding units: no, Profile sanding units: 3, Unit 1 tiltable: yes, Aggregat 1 kW: ca.1,2, Unit 2 slewable: yes, Aggregat 2 kW: 1,2, Unit 3 slewable: yes, Aggregat 3 kW: ca.1,2, Unit 4 slewable: yes, Aggregat 4 kW: ca 1,2, Unit 5 slewable: yes, Aggregat 5 kW: ca.1,2, Unit 6 slewable: yes, Aggregat 6 kW: 1,2, Number of frequency controlt belts: 5, Sanding belt speeds m/min: 5-15, Intermediate sanding of lacquer: yes, Shoes electr. controlled: yes, Constant table hight: yes, Brushing unit: 2, FREE TEXT: Maschinenbett rechts verfährt auf breite der Werkstücke, Year :2001

Manufacturer: Arminius Fräs und Kantenschleifmaschine, Type: SP 12, Program: yes, Axis control: no, Work piece width min-max mm: 60-500, Min.-max. workpiece height in mm: 10-60, Work piece length min-max mm: 100, Sanding hight mm: 120, Surface sanding units: 1, Profile sanding units: 2, Phase units: 2, Monting of the machine: Fräsen/Schleifen von oben/gerade schleifen/Phase/Phase/Bürste/Bürste, Unit 1 tiltable: yes, Unit 1 Kw: 2,2, Unit 2 slewable: no, Unit 2 Kw: 2,2, Unit 3 slewable: no, Unit 3 Kw: ca.2,0, Unit 4 slewable: yes, Unit 4 Kw: ca 1,0, Unit 5 slewable: yes, Unit 5 Kw: ca. 1,0, Unit 6 slewable: Bürste, Unit 6 Kw: Bürste, Shoes electr. controlled: yes, Constant table hight: yes,

Manufacturer: Technolegno, Year: 1989, Program: SPS, Work piece width min-max mm: 60, Min.-max. workpiece height in mm: 10-60, Work piece length min-max mm: 150, Sanding hight mm: 40/60, Schleifaggregate links : 3 + 1+ 2, Surface sanding units: 4, Profile sanding units: 1, Sanding unit discs: Kopierschleifaggragt, Monting of the machine: 4 Langband<CRLF>1 Bürste<CRLF>1 Kopierschleiffen, Unit 1 tiltable: yes, Unit 1 Kw: 0,75, Unit 2 slewable: yes, Unit 2 Kw: 0,75, Unit 3 slewable: yes, Unit 3 Kw: 0,75, Unit 4 slewable: yes, Unit 4 Kw: 0,75, Unit 5 slewable: no, Number of frequency controlt belts: über Getrieb, Sanding belt speeds m/min: 3-18 m/sec, Intermediate sanding of lacquer: yes, Shoes electr. controlled: yes, Constant table hight: yes, Brushing unit: 1, Wight approx. kg: 4000, FREE TEXT: Vorsch von 3-18 Meter, Year :1989

Offer 23145 Technical data: - Flat steel shears - blade length 420 mm - For flat material 400 x 15 mm - Profile steel shears - no knives available - L-steel at 90° 110 x 10 mm - at 45° 65 x 8 mm - T-steel at 90° 90 x 10 mm - Steel bar shears - no knives available - Round steel / square steel 35 / 32 mm - Notching device - for material up to 12 mm - Triangle notch T 60 mm - Hole punch - punching force approx. 500 KN - - Stroke infinitely variable 0 - 40 mm - Punches in steel up to 30 mm Ø in 15 mm - Projection 410 mm - Hydraulic drive 400 V / 7.5 kW - Space requirement approx. W 1400 x H 1800 x D 700 mm - Weight approx. 1800 kg - with: - various punches + dies - Support stop table - Triangular notching device - 2 St. E. footswitches

A 4-axis CNC bar machining center Elumatec is available. Version: 7.8m, travel X/Y/Z: 7720mm/845mm/620mm, max. machining length face/non-face: 7720mm/7600mm, positioning accuracy: +/-0.1mm/m, max. spindle speed: 24000rpm, tool holder: HSK-63F, tool stations: 8, clamping devices: 8, machine dimensions X/Y/Z: approx. 11250mm/3400mm/2950mm, weight: approx. 7400kg, operating hours according to production planning system: approx. 42200h. The machine has no hour counter. Documentation available. An on-site inspection is possible.

A Häusler rolling and bending machine is available. Number of rollers: 3, section modulus: 46cm², max. flat material capacity at 1000mm: 100mm/20mm, max. pipe capacity at 900mm: 102mm/6mm, max. square material capacity at 600mm: 60mm/60mm, max. T-profile capacity at 1200mm: 1200mm/1200mm/13mm, shaft diameter range: 125mm-135mm, machine dimensions X/Y/Z: approx. 4500mm/1700mm/1500mm, weight: approx. 6500kg. An on-site inspection is possible.

Offer 23145 Technical data: - Flat steel shears - blade length 420 mm - For flat material 400 x 15 mm - Profile steel shears - no knives available - L-steel at 90° 110 x 10 mm - at 45° 65 x 8 mm - T-steel at 90° 90 x 10 mm - Steel bar shears - no knives available - Round steel / square steel 35 / 32 mm - Notching device - for material up to 12 mm - Triangle notch T 60 mm - Hole punch - punching force approx. 500 KN - - Stroke infinitely variable 0 - 40 mm - Punches in steel up to 30 mm Ø in 15 mm - Projection 410 mm - Hydraulic drive 400 V / 7.5 kW - Space requirement approx. W 1400 x H 1800 x D 700 mm - Weight approx. 1800 kg - with: - various punches + dies - Support stop table - Triangular notching device - 2 St. E. footswitches

Key data: 30 mm, 30 mm, 80 mm

Flat steel shears - Flat steel 2° inclination 300 x 10 mm - Flat steel 5° inclination 200 x 13 mm - Knife length 305 mm Profile steel shears - L-profile at 90° 80 x 80 x 8 mm - L-profile at 45° 60 x 60 x 6 mm - Round steelØ 30 mm - Square steel 30 mm 3-point notching station - Flat steel 7mm - Notching depth 50mm - Notching width 40mm Punching station - Punching capacity 450 kN - Material thicknessØ 27 x 13 mm - Projection 175 mm incl. electric stop

NIKON Profile projector V-12 V12 Profile Projector with 5 Lenses: 5X / 10X / 20X / 50X / 100X Untested equipment For parts

Profile steel shears, 80/110, Mas. No. 4423251690035 See photos

CONTROLS   CNC controls SIEMENS 840 D WORKING RANGE SURFACE GRINDING   grinding length: 1000 mm   grinding width: 600 mm   vertical travel: 350 mm TABLE (SURFACE GRINDING)   table surface (left-right): 1360 mm   table surface (front-back): 550 mm   workpiece load (max): 1000 kg SPINDLESTOCK GRINDING SPINDLE   spindle revolutions (min): 1000 /min   spindle revolutions (max): 6500 /min GRINDING TOOL   type of grinding tool: wheel   diameter (min): 500 mm   borehole: diameter: 203 mm   width: 100 mm ELECTRICAL SPECIFICATIONS   total power consumption: 91 kW   mains voltage: 400 V   mains frequency: 50 Hz ATTACHMENTS (GRINDING)   coolant unit: yes - 4500 operating hours - Very good and well-maintained condition - Machine body: Meehanit cast iron - Linear guides - Diamond dressing roller: Ø135x100x52 - Automatic balancing system - Programmable slow, fast,  ...

A profile and surface grinding machine RBW is available. Grinding quality class: 6, rotary table diameter: 800mm, grinding diameter: 800mm, max. workpiece height: 300mm, max. workpiece weight: 1000kg. Documentation available. An on-site inspection is possible.

Working width: 260 mm; Working height: 130 mm ; Working waves: 5; Spindle arrangement: down, right, left, up, down; Slot bed: yes; Motor power shaft bottom: 5.5kW; Motor power shaft right: 5.5 kW; Motor power shaft left: 7.5 kW; Motor power shaft top: 7.5 kW; Motor power shaft bottom: 7.5 kW; Adjustment shaft bottom: crank; Adjustment shaft right: crank; Adjustment shaft left: crank; Adjustment shaft top: crank; Planer heads: Centrolock; Feed speed: infinitely variable; Feed roller pressure: pneumatic; Current consumption: 50A; Current consumption: 71.7A;

Code: 0375 Brand: GREDA Model: CFL 4 - CE Standard Contouring, milling, and sanding machine for contouring and milling on two opposing sides of a piece of wood, such as chair, armchair, sofa, gun handles, and various - CE Standard Technical data: N° 2 milling units N° 2 milling and sanding units N° 4 motors 7,5 Hp each N° 4 rotation reversals Max workable length 2500 mm Max workable height 180 mm Min/max workable width 20/320 mm Milling unit shaft diameter 35 mm Max milling tools dimensions diameter 160 mm - height 180 mm Carriage feed 30 mt/min Carriage return 30 mt/min Automatic table slowdown with stops Sanding belt length 2500 mm Automatic positioner N° 6 adjustable pressers Total installed power 36 Hp Compressed air 6 bar Overall dimensions mm 6700 x 2200 x 1800 h Weight kg 3600

Profile grinding machine Brand Ecoline Type: Profilsand 6 New machine The customized solution for sanding individual parts such as for window profiles or moldings. Flexibility also in the choice of material and surface to be sanded: The Profilsand 6 can process different surfaces (impregnated, primed...) and types of wood (solid wood, veneered parts, MDF, etc.). The machine is equipped according to your specifications. Basic machine - Machine bed made of steel frame to ensure high stability. - Ground and therefore absolutely flat surface of the machine bed. - All movements of the aggregates are carried out on linear guides with recirculating ball bearings to ensure durability, precision and strength. - Feed via a driven conveyor belt. - Adjustable support rollers for supporting the parts between the lower units - Pressure rollers are positioned at the top alo ...

The machine is still in use and will be available from around 15 May. We are always happy to answer any questions you may have.

Pallet with 120 x Allimex Allislide profile 1224mm Auction-ID: A1-46359-476

Pallet with 83x Allimex Allislide profile 1224mm Auction-ID: A1-46359-450

Electric profile roller - Choice of horizontal or vertical work - 1 set of hardened standard rollers - lower 2 rollers are driven - 1 set of plastic rollers for diameter 33.7mm/1\" - Instruction manual - Footswitch left/right and EMERGENCY STOP Round material solid 30 / 900 mm Square material solid 30 / 900 mm Angle steel 35X35X5 / 600 mm T - Steel - Bridge Outwards 50x6 / 600 mm Axle diameter 40 mm Working speed 4.5 m/min Roll diameter 148 mm Total power requirement 1.1 kW Machine weight approx. 0.3 t Space requirement approx. 0.75 x 0.6 x 1.4 m Condition: never used / new (5) Auction-ID: A7-46642-50

Profile bending machine with: - Foot pedal right/counterclockwise rotation - Mount: Shaft 50mm - With digital display - Hardened special steel shafts - 1 set of standard rollers - 2 driven rollers - Top roller can be hydraulically fed up and down - Horizontal and vertical operation - Motor with brake device Round material solid 35 (600) mm Square material solid 35 (900) mm Angle steel 50 x 50 x 5 (800) mm T - Steel - Bridge Outside 60 x 7 (600) mm Axle diameter 50 mm Working speed 4.5 m/min Total power requirement 1.5 kW Machine weight approx. 0.4 t Space requirement approx. 1.1 x 0.8 x 1.5 m Condition: never used / new (5) Auction-ID: A7-46642-29

Profile bending machine with: - 1 set of standard rollers - 2 rollers are driven - Working horizontally or vertically Round material solid 30 mm Square material solid 30 mm Flat steel 50 x 10 mm Angle steel mm Axle diameter 30 mm Working speed 6.0 rpm Roller diameter - tools 132 mm Total power requirement 0.75 kW Machine weight approx. 0.25 kg Dimensions approx. 0.6 x 0.8 x 1.3 m Auction-ID: A7-46642-106

Profile bending machine with: - Foot pedal right/counterclockwise rotation - Digital display - 1 set of standard rollers - 2 rollers are driven - Working horizontally or vertically Round material solid 30 mm Square material solid 30 mm Angle steel 20 x 20 x 4 mm Flat steel 25 x 6 mm Axle diameter 20 mm Working speed 11 rpm Total power requirement 0.2 kW Machine weight approx. 80 kg Space requirements approx. 0.6 x 0.6 x 1.5 m Auction-ID: A7-46642-77

Profile steel shears with: - Hole punch - Notches - Footswitch - Machine light - Mounted on trolleys Round steel 33 mm Square steel 30 mm Angle steel 60 x 8 mm Hole diameter in sheet thickness 20 in 13 mm Hole punch: Printing capacity 35 t Hole punch: projection 320 mm Hole punch: large stroke length 24 mm Hole punch: Capacity (diameter x thickness) 30 x 9 mm Hole punch: Capacity (diameter x thickness) 20 x 13 mm Total power requirement 1.5 kW Machine weight approx. 1.7 t Space requirements approx. 1.5 x 0.7 x 1.8 m Auction-ID: A7-46642-126

5-fold combined profile steel shears with: - Flat steel shears - Profile steel shears - Steel bar shears - Notches - Hole punch Round steel 34 mm Square steel 30 x 30 mm Angle steel 100 x 10 mm Flat steel 100 x 14...160 x 1 mm Knife length 175 mm T-steel 100 x 10 mm Notching device: L and T steel 10 mm Hole punch: Pressure capacity 45 t Projection 305 mm Total power requirement 3 kW Machine weight approx. 1.2 t Space requirement approx. 1.4 x 0.8 x 1.5 m Auction-ID: A7-46642-36

Combined belt grinding and pipe grinding machine with - Abrasive belt K 40 - with 7 sanding rollers. 20, 28, 32, 41, 48, 60 and 76mm Sanding belt direction left/right Belt width 100 mm Belt length 2000 mm Belt speed 15/30 m/sec Tube diameter 20 - 76 mm Angle adjustable from - to 30 - 90 degrees Connection voltage 400 V Total power requirement 2.5 /3.3 kW Machine weight approx. 0.19 t Space requirement approx. 1.2 x 0.75 x 0.7 m Condition: never used / new (5) Auction-ID: A7-46642-15

Combined belt grinding and pipe grinding machine with - Abrasive belt K 40 - with 7 sanding rollers. 20, 28, 32, 41, 48, 60 and 76mm Sanding belt direction left/right Belt width 100 mm Belt length 2000 mm Belt speed 15/30 m/sec Tube diameter 20 - 76 mm Angle adjustable from - to 30 - 90 degrees Connection voltage 400 V Total power requirement 2.5 /3.3 kW Machine weight approx. 0.19 t Space requirement approx. 1.2 x 0.75 x 0.7 m Condition: never used / new (5) Auction-ID: A7-46642-252

Profile bending machine with: - Foot pedal right/counterclockwise rotation - Hardened special steel shafts - 1 set of standard rollers - 2 rollers are driven Round material solid 35 mm Square material solid 35 mm Gross diameter max. 70 x 2 mm Rectangle 60 x 60 x 3 mm Flat steel 60 x 10 mm Axle diameter 50 mm Working speed 4.3 m/min Total power requirement 1.5 kW Machine weight approx. 0.4 t Dimensions approx. 0.9 x 0.95 x 1.4 m Condition: never used / new (5) Auction-ID: A7-46642-133

Electric profile roller with - 5 set of rolls 2x for round material 20mm and 30mm, 1x for flat material 1x for square material - Foot switch with emergency stop Round material 30 x 1 mm Square material 30 x 30 x 1 mm Round material solid 16 mm Square material solid 30 x 10 mm Speeds: 9 rpm Total power requirement 1.1 kW Machine weight approx. 0.32 t Dimensions approx. 0.82 x 0.60 x 1.26 m Condition: never used / new (5) Auction-ID: A7-46642-61

Profile bending machine with: - Foot pedal right/counterclockwise rotation - 1 set of standard rollers - All 2 rollers are driven - Working horizontally or vertically Round material solid 35 (800) mm Square material solid 35 (1200) mm Angle steel 50 x 50 x5 (850) mm Flat steel 60 x 10 (800) mm Axle diameter 50 mm Working speed 4.5 m/min Roller diameter - tools 155 mm Total power requirement 1.5 kW Machine weight approx. 0.9 kg Space requirement approx. 0.6 x 0.9 x 1.35 m Auction-ID: A7-46642-58

Profile steel shears Round steel 25 mm Square steel 22 mm Angle steel 70 x 7 mm Cutting capacity 100 x 10 mm Sheet thickness 10 mm Total power requirement 1.3 kW Machine weight approx. 0.6 t Space requirement approx. 1.1 x 0.65 x 1.5 m Condition: unchecked (6) Auction-ID: A7-46642-4

Approx. 500 kg of material in total; Longest pipe for transport 6000mm Auction-ID: A1-46862-64

equipped with 6 wire brushes and 6 plastic brushes, interchangeable; electric rotating head; including \"Delfin\" extractor, type: DBF30 \"M\", year: 2017, s/n: 170486169 Auction-ID: A1-41997-60

Transition profiles are offered in various colours. estimated value of goods 1000 €Shipping within Germany possible - direct processing with the seller. Only bid if you have sufficient financial resources, a bid is binding. The Euro pallet is not part of the auction. Auction-ID: A7-46944-166

Max. punching capacity: 400 kN Max. shear capacity: 600 kN Punches 20 mm holes in 16 mm steel Shears on the flat steel shear to 300 mm up to material thickness of 12 mm steel Further technical data on request With an assortment of stamps and dies as desired Weight: approx. 1,500 kg

• Model: [e.g. PJ-A3000 / For sale is a precise optical profile projector from the Mitutoyo brand, the standard for non-contact measurement technology in manufacturing and quality assurance. The device is ready for immediate use and is ideal for testing small parts, threads or contours. Dimensions projection area 260x150 mm Viewing appointment desired Auction-ID: A7-46993-3