profile bending machine used for sale

Bending tool, die, upper knife, upper tool, straight tool, die tool, seam closing tool -Tool: for folding machine RAS Typ 74.30 -Dimensions: see the drawing in the photos -Distance recess rail: center center 650 mm -Dimension: 3060/28/H121 mm -Weight: 65kg

Upper tool - bending tool for die bending machine GEWA Press brake set: 15 pieces Type: GWP-1291 Angle: 88 Radius: 0.8 mm Segment height: 200 mm max. pressure per meter: 85 t/m Total length of the 15 segments: 4010 mm Segment lengths: 6 x 505 mm, 1 x 400 mm, 1 x 190 mm, 1 x 100 mm, 1 x 69 mm, 1 x 58 mm, 1 x 48 mm, 1 x 42 mm, 1 x 40 mm, 1 x 33 mm Total height with tool holder: 230 mm Tool holder: 30 x 13 mm, 8.4 mm groove Weight: 260 kg very good condition Suitable lower tool under stock number 60752. Tool set suitable for AMADA, TRUMPF and LVD press brakes with appropriate tool system; used

equipped with: -2 milling units -1 long belt sanding unit -3 buffing units/profile grinding units

NC machine table (X-axis) Travel speed: 0.1 - 30 m/min Travel range: 800mm Tip height: -K version .200 mm grindable workpiece ?: 10 - 250 mm Center width (max. workpiece length): 800 mm NC divider (A axis) possible divisions: 1-999 Accuracy: ?3 angular seconds Workpiece centering by centering tip: Version K MK3 Max. Speed: 80 min-1 NC grinding slide (Z-axis) Feed step: 0.001 mm Input fineness: 0.001 mm Travel speed: max. 2 m/min Travel: 335 mm NC shift axis (transverse movement of the grinding wheel Y-axis) Travel: ? 70 mm Travel speed: max. 1m/min Input fineness: 0.001 mm NC dressing device (B, U and W axis) Working area of the setter: 120 mm x 120 mm Numerically controlled axes: 3 Feed speeds: U-axis: 0-2500 mm/min W-axis: 0 - 2500 mm/min B-axis: 0 - 100 min-1 Step fineness: U-axis: 0.0005 mm W-axis: 0.0005 mm B-axis: 0.025? Grinding spindles (data are based on a maximum cutting speed  ...

NC machine table (X-axis) Travel speed: 0.1 - 30 m/min Travel range: 800mm Tip height: -K version .200 mm grindable workpiece ?: 10 - 250 mm Center width (max. workpiece length): 800 mm NC divider (A axis) possible divisions: 1-999 Accuracy: ?3 angular seconds Workpiece centering by centering tip: Version K MK3 Max. Speed: 80 min-1 NC grinding slide (Z-axis) Feed step: 0.001 mm Input fineness: 0.001 mm Travel speed: max. 2 m/min Travel: 335 mm NC shift axis (transverse movement of the grinding wheel Y-axis) Travel: ? 70 mm Travel speed: max. 1m/min Input fineness: 0.001 mm NC dressing device (B, U and W axis) Working area of the setter: 120 mm x 120 mm Numerically controlled axes: 3 Feed speeds: U-axis: 0-2500 mm/min W-axis: 0 - 2500 mm/min B-axis: 0 - 100 min-1 Step fineness: U-axis: 0.0005 mm W-axis: 0.0005 mm B-axis: 0.025? Grinding spindles (data are based on a maximum cutting speed  ...

EDGE SANDING machine for PANEL and PROFILES type FMB 2 I composition : 1° belt : tilting variable speed sander (with Inverter) - motor power Hp 2 2° belt : tilting variable speed sander (with Inverter) - motor power Hp 2 Blowers for belt cleaning Carpet speed variator from 5 to 25 mt / min Upper adjustable presser with rubber wheels Lateral support for wide panels volt. 380/50

Loop scope Length x width 1200 x 600 mm Distance table spindle Center max. 700 mm Wheel Max (D x W x d) 400 x 80 x 127 mm Grinding head and drive Y-axis (vertical movement) Vertical grinding head 550 mm Distance from spindle Center table 150... 700 mm Machine table and drive x axis (longitudinal movement) Magnetic clamping plate size 1200 x 600 mm Table longitudinal travel, max. 1300 mm Table burden, including magnetic clamping plate, Max 800 kg Stand and drive Z-axis (transversal movement) Stand transverse stroke, 560 mm Space requirements, power consumption, weight Space, with coolant system 4410 x 2600 mm (W x D), Machine height 2550 mm Weight of the machine (incl. control cabinet), CA. 5400 kg

Description the grey cast iron machine frame convinces with stability and torsion alimness, precise guides and excellent workmanship all guideways are reliably supplied with lubricant by an automatic central lubrication the working area is protected by an easily accessible enclosure the high-performance coolant pump is combined with the suction unit and binds the resulting grinding dust and aerosol during processing Grinding spindle the grinding spindle is large in size, dynamically balanced, completely sealed and permanently lubricated Prestressed precision bearings enable maximum grinding performance and reliability for many production hours Programming the high-quality ball-circuit spindle and the powerful servo motor guarantee precision and repeatability of positioning in the Y-axis for set-up work and for the manual process of the grinding spindle, th ...

Qty. 1 Second-hand Decoral coating profile production line Mfc.: DECORAL Built: 2004 Type: VIV 801/2 – TRANSFER SEMI – AUTOMATIC Output (theoretical): approx. 90 pcs./hour Consist of: Bagging machine – CO 130BB Automatic crane – basket handling Gas Sublimation oven VV801/2.T Electrical Sublimation oven for small parts – 68 kW The table can handle up to 15 profiles per oven batch and given that the cycle time is less than 10 minutes. The line was in operation for 2-3 years only – 1 shift operation!

CATALOG NUMBER 6056 TECHNICAL DATA - max height of the processed material 250mm - working length of the spindle 260mm - 40mm spindle diameter - worktop length / width 630x360mm - guide - 9.3 kW engine - 2 material clamps - pneumatic - diameter of the extraction connector 2x120mm - air demand 8bar - dimensions length / width / height 1370x980x1620mm - weight 450 kg - unpainted - cutters included, 2 pcs - Italian production - used milling machine, very good condition Net price: PLN 22900 Net price: EUR 5264 Net price, calculated at the rate of 4.35 PLN / EUR (with larger exchange rate fluctuations, the price may change)

Technical data Table length: 1000 mm Table width: 300 mm Table load max.: 400 kg Execution: Longitudinal travel (X-axis): 1040 mm Transversal travel (y axis): 500 mm Vertical travel (z axis): 410 mm Automatic cross-feed: stepless from: 0.001 mm/min up to: 0.099 mm/min Table speeds: stepless from: 2 m/min up to: 35 m/min Rapid traverse:: 600 mm/min Automatic vertical feed: from: 0.005 mm up to: 5 mm from: 10 mm/min up to: 1000 mm/min Vertical rapid traverse: 1 m/min Diameter of grinding wheel: 400 mm Width of the grinding wheel: 50 mm Wheel int. diameter: 127 mm Grinding wheel speeds: up to: 1500 rpm Voltage 50 Hz 3x: 400 Volt Total power required: 9 kVA Machine´s weight about: 4000 kg Overall dimensions machine: Length: 3300 mm Width: 2100 mm Height: 2600 mm Various accessories: Coolant system: 140 l Electrical magnetic chuck Length: 800 mm Width: 400 mm Central lubrification

Grinding area: X-axis grinding length: 1,000 mm Z-axis grinding width: 400 mm Y-axis grinding height : with smartLine Basic (grinding wheel D = 300 mm) 500 mm on the work table/with smartLine Kombi (grinding wheel D = 400 mm) 500/700/950 mm on the work table - 420/620/870 mm on magnetic plate Table load: 750 kg on the work table/525 kg on magnetic plate Drive element: ball screw Drive motor: AC servo motor, adjustable Measuring system: absolute, rotary encoder Resolution: 0.001 mm Travel path: 1,190 mm Feed: 0.01 - 30 m / min Grinding path adjustment: via setting buttons on the control panel (xpressCube / -Pro) or direct value entry (840D) Machine control: Siemens 840D sl Main machine dimensions (standard version): Width: 4,100 mm Depth: 2,250 mm Height: 2,350 mm (2,650 / 3,050 mm with Smart N Kombi) Machine weight: approx. 5,400 kg

I sell a 4-side brush machine suitable for windows, turrets, tables, etc. Futura MS120 Y1 X2, built in 2005 Working width 1200mm Working height 200mm Total weight 2500kg Configuration: Side grinding heads left - right H.170mm 2 underheads left - right nylon B.140mm Oscillating top head B.260mm Large grinding heads top - bottom B.1150mm Machine together with all the heads on the picture. Available the same.

Back grinder for JUNG surface grinding machines, etc. Operating voltage: 24 volts. Magnetic plate: 110 x 75 mm. Angle adjustment: 0 - 2 degrees. Dimensions: 500 x 200 x 125 mm high. In original JUNG wooden cassette, Tools and operating instructions. Weight: approx. 25 kg. Shipping with DHL possible in consultation. Visually, good little used condition. The device can be visited in consultation and is immediately available. Please also note my other entries.

CNC flat and profile grinding machine Control: CNC SINUMERIK 840 D workpiece size 800 x 400 x 360 mm Table load: 500 kg Grinding wheel dimensions: 500 x 203 x 80 mm Spindle speed: 600 - 2000 rpm Total power requirement: 62 KW Dimensions: 6.2 x 2.8 x 2.78 m Machine weight: 7,100 kg

I sell a tenon machine for parallel milling, grooves for pallet tape etc. WACO T2-SL Year of construction 1984. Groove width 30mm. Motor 3,3kW Made in Germany. Available the same. With dokumentazion.

Petewe PFS 2u

De STEFANI edge polisher model MVT1000: - 1 tilting tape, for straight and shaped edges - variable belt speed with potentiometer on the panel - forward track with variable speed - manual lifting of the presser

Used profile grinding machine Internal machine number: m3360 Manufacturer Zimmermann Type FZ PS 1 Year of construction 1971 Power 1.6 kW Total weight approx. 380 kg With abb. Grinding rods Item location: 58730 Fröndenberg/Ruhr The machine can be visited and tried out under power. A forklift/crane for loading is available. It is possible to expertly examine the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty / guarantee is excluded. The goods are sold ex location / warehouse, with transfer of risk to the buyer, this also applies to a shipment on our part, which we have carried out on your behalf. This offer is only aimed at trad ...

General: Year of construction 2019 Spindle speed 1,450 rpm Travel speed table 5 – 25 m/min Largest grinding wheel 355 x 38 x 127 mm Distance spindle – table max. 500 mm Clamping surface 300 x 600 mm Automatic feed control AD5

General: Year of construction 2019 Spindle speed 1,450 rpm Clamping surface 300 x 600 mm Largest grinding wheel 355 x 38 x 127 mm Travel speed table 5 – 25 m/min Distance between spindle and table 500 mm Weight 1.700 kg Other equipment and accessories included: Automatic feed control AD5 Coolant device Hydraulic

CNC flat and profile grinding machine, horizontal grinding spindle LSCH-220 Control: CNC SINUMERIK 840 D workpiece size 800 x 400 x 360 mm Table load: 500 kg Grinding wheel dimensions: 500 x 203 x 80 mm Spindle speed: 600 - 2000 rpm Total power requirement: 62 KW Dimensions: 6.2 x 2.8 x 2.78 m Machine weight: 7.100 kg

WEINIG Rondamat R 960, high-precision knife sharpening machine for sharpening and production of profile knives from a solid blanket according to a template, as well as Resharpening of straight planer knives in the cutter head • Grinding length / tool width max. 240 mm • Grinding mandrel holder D = 50 mm • Tool flight circle / tool diameter min. 100 – max. 300 mm • Grinding wheel diameter for profile heads min. 150 / max. 225 mm • Grinding wheel diameter for planer heads 150 mm • Grinding wheel width (ceramic, borazone, diamond) 2 – 3 – 4 – 10 mm • Grinding wheel bore 60 mm • Clear-angle grind radial on the back of the knife 10° – 30° • Clear-angle grinding laterally in manual mode 0° – 20° • Clear-angle grind for straight cutter heads 60° • Grinding spindle drive 1.1 kW / 400 V / 50 Hz • Coolant tank approx. 50 litres • Motor co ...

Grinding surface 600 mm x 250 mm Table surface 600 mm x 200 mm Distance between the table surface and the grinding spindle max. 550 mm Max. table load 200 kg Grinding spindle speed at 50 Hz 2,800 rpm Drive power of the grinding wheel 2.2 kW

- Grinding width: 200 mm - Magnetic table: 500 x 200 mm - Dressing device: yes - Coolant device: yes - Automatic infeed: no - Machine weight: 1850 kg - Dimensions (W x D x H): 1.8 x 1.5 x 2.2 m m - Condition: good, immediately ready for use Accessories without documentation, machine feet

GENERAL Project No.: 905610 Quantity: 1 pcs. Manufacturer: MÄGERLE Type: MGC Grinding Centre Control: Siemens 840 D solutionline Year of construction: 2020 Conservation status: Used machine Machine on approx. (hrs): 2.124 Program run approx. (hours): 155 Spindle on approx. (hrs): 214 DESCRIPTION GRINDING Travel in X 1300 mm Travel in Y 450 mm Travel in Z 350 mm Max. rapid traverse speed in X/Y/Z 20/10/10 m/min Max. distance table spindle center 850 mm Automatic balancing device Motor spindle Max. diameter x width x bore grinding wheel 500x160x203.2 mm Max. circumferential speed 63 m/s2 Max. speed 5000 1/min Max. power at ED 10-40/100% 50 kW Workpiece table with T-slots and 16-fold oil feed-through (shuttle table) 2x 760×325 mm Clamping hydraulics Hydrostatic guidance Forming roll dresser MT 200 D200 B167 OTHER EQUIPMENT Splash guard cladding wit ...

Manufacturer: Heesemann, Type: UKP 20, Year: 1990, Control: Programm, Program: yes, Axis control: yes, Work piece width min-max mm: 3, Min.-max. workpiece height in mm: 3, Sanding hight mm: yes, Schleifaggregate links : yes, Schleifaggregate rechts : 2300 , Transverse sanding units: 80, Abrasive belts at bottom: 120, Surface sanding units: 250, Year :1990

Manufacturer: Evimatic, Type: HF 82 CB, Year: 2000, Control: yes, Control: yes, Work piece width min-max mm: min. 200, Schleifaggregate rechts : 2, Unit 1 tiltable: yes, Aggregat 1 kW: ca. 1,5, Unit 2 slewable: yes, Aggregat 2 kW: ca.1,5, Number of frequency controlt belts: 2, Brushing unit: 1, Total lenght mm: 2500, Year :2000

Manufacturer: Delle Vedove, Type: Profilleistenschleifmaschine, Monting of the machine: 8 Schleifaggregate, Program: yes, Axis control: yes, Work piece width min-max mm: 10-250, Min.-max. workpiece height in mm: 6-80, Work piece length min-max mm: 300, Sanding width mm: 2500, Sanding hight mm: 80, Schleifaggregate links : 3, Schleifaggregate rechts : 3, Transverse sanding units: no, Surface sanding units: 2, Profile sanding units: 6, Monting of the machine: 8 Schleifaggregate,

Manufacturer: De Stefani, Type: MVT 3500, Year: 2008, Monting of the machine: 3 X Profilschleifen, Program: yes, Axis control: no, Work piece width min-max mm: 60, Min.-max. workpiece height in mm: 80, Work piece length min-max mm: 250, Sanding hight mm: 80, Schleifaggregate rechts : 3, Abrasive belts at top: 3, Monting of the machine: 3 X Profilschleifen, Chain width mm: yes, Monting of the machine: ca.1,5, Unit 1 tiltable: yes, Aggregat 1 kW: ca.1,5, Unit 2 slewable: yes, Aggregat 2 kW: ca.1,5, Unit 3 slewable: yes, Aggregat 3 kW: ca.1,5, Unit 9 slewable: 3, Shoes electr. controlled: yes, Constant table hight: yes, Machine length: ca.4000, Year :2008

Manufacturer: Tagliabue, Type: PS 40 60, Year: 2001, Control: Siemens, Control: Siemens, Work piece width min-max mm: 20-350, Min.-max. workpiece height in mm: 10-60, Work piece length min-max mm: 450, Sanding hight mm: 60, Schleifaggregate links : 3, Schleifaggregate rechts : 3, Transverse sanding units: no, Profile sanding units: 3, Unit 1 tiltable: yes, Aggregat 1 kW: ca.1,2, Unit 2 slewable: yes, Aggregat 2 kW: 1,2, Unit 3 slewable: yes, Aggregat 3 kW: ca.1,2, Unit 4 slewable: yes, Aggregat 4 kW: ca 1,2, Unit 5 slewable: yes, Aggregat 5 kW: ca.1,2, Unit 6 slewable: yes, Aggregat 6 kW: 1,2, Number of frequency controlt belts: 5, Sanding belt speeds m/min: 5-15, Intermediate sanding of lacquer: yes, Shoes electr. controlled: yes, Constant table hight: yes, Brushing unit: 2, FREE TEXT: Maschinenbett rechts verfährt auf breite der Werkstücke, Year :2001

Manufacturer: Arminius Fräs und Kantenschleifmaschine, Type: SP 12, Program: yes, Axis control: no, Work piece width min-max mm: 60-500, Min.-max. workpiece height in mm: 10-60, Work piece length min-max mm: 100, Sanding hight mm: 120, Surface sanding units: 1, Profile sanding units: 2, Phase units: 2, Monting of the machine: Fräsen/Schleifen von oben/gerade schleifen/Phase/Phase/Bürste/Bürste, Unit 1 tiltable: yes, Unit 1 Kw: 2,2, Unit 2 slewable: no, Unit 2 Kw: 2,2, Unit 3 slewable: no, Unit 3 Kw: ca.2,0, Unit 4 slewable: yes, Unit 4 Kw: ca 1,0, Unit 5 slewable: yes, Unit 5 Kw: ca. 1,0, Unit 6 slewable: Bürste, Unit 6 Kw: Bürste, Shoes electr. controlled: yes, Constant table hight: yes,

Manufacturer: Technolegno, Year: 1989, Program: SPS, Work piece width min-max mm: 60, Min.-max. workpiece height in mm: 10-60, Work piece length min-max mm: 150, Sanding hight mm: 40/60, Schleifaggregate links : 3 + 1+ 2, Surface sanding units: 4, Profile sanding units: 1, Sanding unit discs: Kopierschleifaggragt, Monting of the machine: 4 Langband<CRLF>1 Bürste<CRLF>1 Kopierschleiffen, Unit 1 tiltable: yes, Unit 1 Kw: 0,75, Unit 2 slewable: yes, Unit 2 Kw: 0,75, Unit 3 slewable: yes, Unit 3 Kw: 0,75, Unit 4 slewable: yes, Unit 4 Kw: 0,75, Unit 5 slewable: no, Number of frequency controlt belts: über Getrieb, Sanding belt speeds m/min: 3-18 m/sec, Intermediate sanding of lacquer: yes, Shoes electr. controlled: yes, Constant table hight: yes, Brushing unit: 1, Wight approx. kg: 4000, FREE TEXT: Vorsch von 3-18 Meter, Year :1989

Profile milling machine Guillet OFP Shaft 40 mm with glazing bead cutter Table 1200 - 750 mm Extraction 120 mm, Lateral extension from 2200 mm Auto. Defective positioning Engine Brake The machine is in good condition, ready for operation. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax 0041 62 966 21 12

Modular unit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine, profile holder edge banding machine -Manufacturer: Homag, profile holder from edge banding machine BRANDT KM 35 -Individual components: see photos -Dimensions: 665/540 / H375 mm -Weight: 30 kg

Profile edge grinding and milling machine, edge grinding machine, edge grinder, grinding machine -with: copier -Number: 1x grinding head -Power: 1.1 kW -Speed: 500-1500 rpm -Sanding head in thickness: adjustable -Max. Workpiece thickness: mm -Max. Corner radius: mm -Dimensions: 1200/1420/H1520 mm -Weight: 656 kg

Profile edge grinding and milling machine, edge grinding machine, edge grinder, grinding machine -with copier -2x: milling heads -Power: 1.5 kW -Speed: 3000-6000 rpm -1x: grinding head -Power: 1.1 kW -Speed: 500-1500 rpm -Milling and grinding heads in thickness: adjustable -Max. Workpiece thickness: 40 mm -Max. Corner radius: 40 mm -Dimensions: 1200/1600/H1520 mm -Weight: 782 kg

KÄRCHER ROBO 30 pipe boring machine for pipes, flat material and profiles With this machine, tubes, flat material or profiles can be cut very quickly and accurately in a single pass. can be drilled or milled at an angle or at an angle up to  50° in such a way that filling rods or filling tubes up to 1" can be drilled or milled can be plugged through. With the standard additional clamp for the jaw chuck, you can not only cut pipes, but also transport flat material or other profiles with the feed and at the desired angle up to over Make 50° single-sided holes or through holes. The clamping jaws in the self-centering vice have a recess at the top for flat material. We are unrivalled when it comes to converting to another material! The feed is positioned at 0.1 mm with the counter with absolute or chain gauge. With the ROBO 30, you don't need to set limit switches or cams for ...

For sale is: 1 piece used CNC surface grinding machine Manufacturer: Jung Type: 740C Year: 1996 Siemens 840 controller Electromagnet 700 x 400mm Complete metal powder filter and conveyor system Machine weight: 6.000Kg For more technical data, see pictures. Complete documentation, some new grinding wheels included Videos can be sent on request. The machine can be viewed in our warehouse in 09599 Freiberg.

Surface grinding machine from Ziersch & Baltrusch in good condition Sanding area: 450 x 200 mm Weight: 1600 kg

Connected load: 1.6A, including documentation and some accessories.

X-travel: 600mm, y-travel: 475mm, z-travel: 400mm, max. table load: 600kg, connected load: 14kW, controls: UNICON-F, length: 2750mm, width: 2710mm, height: 2720mm, weight: 3.3t, with documentation, machine bed made of micro-granite, drive of the y- and z-axis via ball screw and controllable AC motors.

ELB Perfect BD 15 PLC surface grinding machine, grinding area 1500 x 550 mm, grinding wheel 400 x 100 mm, electric perm magnetic clamping plate 1500 x 550 mm, automatic dresser with compensation, paper belt filter, the machine is overhauled, grinding spindle rebeared, guideways are scraped, meets the tolerance of a new machine. We are happy to take over the installation / training on site, as well as the subsequent service

ELB Perfect BD 10 SPS, built in 2003, grinding area 1000 x 400 x 400 mm, the machine was overhauled in 2012 and equipped with the new ELB Easy Grind control, accessories: Electric Perm magnetic clamping plate 1000 x 600 mm, Automatic straight dresser for the grinding wheel mounted on spindle box, with dressing compensation, coolant tank with paper belt filter, suction. The machine is functionally tested and can be viewed under power at our site, we are also happy to take over the installation and training on site.

Digital display: 2 axes Grinding area: 600 x 250 mm Electro-permanent magnet: 600 x 200 P=4 mm Table load without magnet max.: 250 kg Distance between table and spindle centre: 500 mm Column elevation: 120 mm Overhead dresser dresser Dressing Amount Compensation Automatic Grinding spindle motor: 2.3 - 9.3 kW Grinding spindle speed: 1,000 - 4,000 U-1 Grinding spindle speed control Grinding wheel dimensions A-Ø max x width max x bore: 250x25x50.8 mm Table Clamp Preparation of extraction without suction device Belt filter basins Flanges Grinding wheel Documentation Actuators Voltage: 400 V / 50 Hz Total connection: 10 kVA Machine weight approx.: 2.000 kg Approx. space: 2,600x1,800x2,300 mm

Description: Machine number: 3100-175638 Operating voltage: 380 V Frequency: 50 Hz Grinding wheel diameter: up to 175 mm With optical magnification of 20x and 50x Incl. 2-axis digital readout from the manufacturer HEIDENHAIN Approx. Onsite Dimension. (l x w x h): 2,500 x 1,600 x 1,700 mm, weight approx.: 2,000 kg

Inv. Num. : 7471 Type: UPFS 150/88 XYZ Producer: DOEBELI Created: 1991 Parameters: Control system: Bosch Table diameter: 250 mm Axis X: 150 mm Axis Y: 50 mm Axis Z: 60 h Equipment: Filtration Coolant tank

Inv. Num. : 7472 Type: UPFS 150-117 Producer: DOEBELI Created: 1995 Parameters: Control system: Bosch Table diameter: 250 mm Axis X: 150 mm Axis Y: 50 mm Axis Z: 60 mm Equipment: Filtration Coolant tank

Edge sanding belt KS10: Yes; Chamfer and radius milling unit: Yes; Profile Grinding Wheel Unit: Yes; Machine Length: Machine Width: Weight: 800kg;