profile bending machine used for sale

see PDF attached

travel -x axis: 4000 mm travel -y axis: 270 mm travel -z axis: 270 mm : : control: CNC control Tekna SLW 8 tool places pneumatic clamping device Technische Daten / technical details: X-Weg / X-travel 4000 mm Y-Weg / Y-travel 270 mm Z-Weg / Z-travel 270 mm Spindelaufnahme / spindle taper SK30 Drehzahlbereich Spindel / spindle speed 18000 Upm /rpm Antriebsleistung / drive capacity 7 kW Gewicht der Maschine ca. / weight 1100 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Punching force: 550 kN (punches e.g. 30 m in 16 mm material), with search device via foot switch for graining Projection: 550 mm Cuts 350 x 13 mm or 230 mm on the flat steel shears Two separate foot switches for the punching and shearing sides, so that punching and shearing can be carried out independently Assortment of tools is included in the price

Haul-off, used and refurbished Manufacturer: Battenfeld Type: P-250-SX-2000 Year of construction: 1988 Haul-off force: 30,000 N Pad width: 250 mm Effective contact length: 2000 mm Number of rubber pads: 200 pieces Haul-off speed: 0.16 - 4.0 m/min. Drive motor: 4.2 kW Extrusion height: 1000 – 1200 mm Caterpillar clamping: pneumatic Profile cross-section: max. approx. 300 x 100 mm Power: 10 kW Dimensions: 3400 x 1300 x 2300 mm (LxWxH) Weight: approx. 2300 kg Condition: The haul-off has recently been completely overhauled.

Caterpillar haul-off, used Manufacturer: IDE Type: ME-31 Year of construction: 1976 Pad width: 180 mm Effective contact length: 800 mm Pull-off speed: max. approx. 10.0 m/min. Drive motor: approx. 3.0 kW Extrusion height: 1000 – 1200 mm Caterpillar clamping: manually by spindle Profile cross-section: max. approx. 300 x 100 mm Note: The haul-off was overhauled in 2015 and a new electrical control cabinet was installed. Condition: The upper gearbox is leaking.

Manufacturer: Stanko Type: H5222A Stock number: 0982 Punching: Ø30 in 16mm Notching: 100 x 12mm Round material: 45 mm Square material: 40 x 40 mm Angle steel: 125 x 125 x 12 mm Dimensions (LxWxH): 2000 x 1400 x 2400 mm Machine weight: 2.35 t

punching and shearing capacity: 380 kN Punches e.g. 30 mm holes in 10 mm steel Shears on the flat steel shears to 300 mm to 12 mm steel Further technical data on request With a range of stamps and dies as desired

1 x Vacuum calibration unit for profiles Manufacturer: Battenfeld Type: K-400-V4 Year of construction: 1992 Total length: 6700 mm Vacuum connections: 4 x 8 pieces Water connections: 26 pieces Vacuum pumps No.1-3: 3 pieces of BluVac pumps from Speck, Energy-saving vacuum generation thanks to patented speed control Pump power: 3 x 4.3 kW Vacuum pump No. 4: Speck (5.5 kW) Longitudinal adjustment: electromotive Connected load: approx. 26 kW Accessories: 1 x water pump (1.5 kW) for the water circuit, 1 x blower (0.95 kW) for drying the profile,

Haul-off and saw combination, consisting of: 1 x Caterpillar haul-off Manufacturer: Battenfeld Type: P250-SX-2400 Year of construction: 1992 Contact length, effective: 2200 mm Pad width: 250 mm Haul-off force, max.: approx. 30,000 N Speed: max. 8.0 m/min. Connected load: approx. 6.0 kW 1 x Saw Manufacturer: Battenfeld Type: SPR-125 Year of construction: 1992 Profile cross-section, max.:230 x 90 mm or 160 x 110 mm Pipe diameter: max. 125 mm Saw blade diameter: 420 mm Travel distance:1000 mm Working speed: max. 20 m/min. Cutting capacity: 15 cuts/min. Saw motor: approx. 1.5 kW

: neu : ca. 10 Wochen ab Auftrags : Spanien : 24100 € : 1000 mm : 400 mm : 12 m/min : 0,2 mm : 0,1 mm : 300 kg The Semi Paxy table is a positioning unit with CNC control unit which may be factory fitted onto any GEKA punching machine with a 500 mm or larger throat. THE ASSEMBLY CONSISTS OF: Mounting plate. Table assembly with X” and Y” axis driven by servo motors. B&,R Power Panel 500 PC based 15” touch screen control Each axis X” and Y” has servo motors with built encoder for precise measurement. Electric cabinet THE WORK PROCESS IS AS FOLLOWS: The position of the holes to be punched is programmed either in absolute or incremental dimensions. When the control is started up, the guide stops are positioned for first hole. The material to be punched is placed against guide stops and the punching pedal is activated, the ram then cycles. After the punch has returned ...

: neu : ca. 10 Wochen ab Auftrags : Spanien : 26700 € : 6000 mm : 40 mm : 6000 mm : 600 kg : 180 mm : 0,2 mm : 0,1 mm The ALRS 600 is a CNC controlled flat bar feeding and shearing system to be mounted on GEKA Hydracrop 80 and Hydracrop 110 dual cylinder ironworkers. This system is ideally designed for shearing desired lengths and quantities of flat bars up to 600x15 mm and 6 m length. THE ASSEMBLY CONSISTS OF: Drive roller with hydraulically controlled pinch roller. Servo motor with linear encoder. B&,R Power Control 500 10”user friendly touch screen control mounted in a control cabinet. Positive hydraulic clamping. Fix guide rollers. Manually adjustable straight guide rollers. 6m roller bed conveyor. Electric cabinet THE WORK PROCESS IS AS FOLLOWS: Place the flat bar on the rollers Adjust the lateral rollers to the width of the flat bar Clamp the material with the h ...

Punching force: 400 kN (e.g. punches 20 m in 15 mm steel) Cuts 150 x 10 mm on the flat steel shears Foot switch for stroke release Quick-change device Assortment of tools is included in the price

Counter profile cutter head HUMPH G&-5041-M31MC VAT not deductible! Special price: net 120,-€

Offer 22646 Hydraulic profile and bar steel shears with notching device and hole punch Specifications: - Flat steel scissors - Flat steel - 400 x 16 mm - or: 300 x 18 mm - Profile steel shears - L- and T-irons at 90° 130 x 12 mm - Square steel / round steel 40 / 40 mm - Notcheter - with square clinker for sheet metal up to approx. 13 mm - Latch depth approx. 70 mm - Latch width approx. 52 mm - Hole punch - Punching force approx. 60 t - Projection 400 mm - Stroke approx. 10 to 50 mm - perforated in steel up to Ø 31 in 15 mm - Material stop - div. 10 pcs punches + matrices - Drive 400 V / 5.5 kW - Dimensions W 1100 x H 2000 x D 1700 mm - Weight approx. 2100 kg

Hydr . Flat profile and bar steel shears with notching device and hole punching Specifications: - Flat steel shears cut up to 375 x 10 mm - 220 x 20 mm - Profile steel shears - cuts L-steel at 90° to 130 x 13 mm - Steel bar shears - cuts round steel up to 45 mm - Square steel up to 45 mm - Notching device - with square notching device 100 x 42 x 10 mm - Hole punch - punching force 600 KN - with stop table - Projection 300 mm - perforated in steel up to 28 mm Ø in 15 mm - or 34 mm Ø in 12 mm - manual length stop - Drive 400 V / 4 kW - Space requirement approx. W 600 x H 1550 x D 1500 mm - Weight approx. 1300 kg

Line for PVC profiles : 1.Extuder Single Theysohn AS 63mm PVC 2. Calibration table Greiner Genius Cal 2P/3.6 3. Theysohn REA32/1HJ-TECH belt lashing 4. saw Theysohn REA32/1HJ-TECH) price for all Line 25.000 Euro

Offer 22562 Hydraulic profile and bar steel shears with notching device and hole punch Specifications: - Flat steel scissors - Flat steel - 500 x 18 mm - or: 300 x 22 mm - Profile steel shears - L- and T-irons at 90° 120 x 13 mm - at 45° 90 x 10 mm - Round steel 45 mm - Square steel 40 mm - Notcheter - With square notch for sheets up to 13 mm - Jack width / depth 65 / 85 mm - With triangular notch for sheets up to 13 mm - Notch depth 70 mm - Hole punch - Punching force approx. 80 t - Projection 510 mm - Stroke approx. 10 to 29 mm - perforates in steel up to 39 mm Ø in 16 mm - perforates in steel up to 30 mm Ø in 20 mm - Stroke rate at 20mm hole. / Scissors 30 / 20 1/min - E. contact stop - various punches + matrices - Drive 400 V / 7.5 kW - Dimensions W 900 x H 1800 x D 1800 mm - Weight approx. 2600 kg ...

The scope of delivery includes: 01x U-profile, used Material colour: grey Total length: approx. 6,000 mm U-profile dimensions: approx. 50 x 38 mm Material thickness bridge: approx. 5.00 mm Weight / running meter.: approx. 5,49 kg Weight / pcs.: approx. 32,94 kg Note: - In the U-profiles there are 8 - 10 boreholes with a borehole diameter of 11 - 15 mm! - The U-profiles may be slightly bent, as well as small rust or other damage. General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.

Specifications: Cutting performance Max. round bar diameter: 36 mm Max. thickness of the square bar: 30 mm Max. flat steel thickness: 200 mm Stroke rate: 45 1/min Weight, approx.: 1760 kg Dimensions (LxDxH), approx.: 2300 x 850 x 1550 mm For further technical data, see pictures. Equipment: Device for cutting : - Round rods - square rods -Strap iron -Angles - T-profiles - Corner profiles - for hole punching

Max. punching and shearing capacity: 1000 kN Receptacle for hole diameters up to 90 mm Punches 31 mm holes in 25 mm steel Shears on the flat steel shears to 500 mm up to material thickness of 18 mm steel Further technical data on request With an assortment of punches and dies as desired Weight: approx. 3,000 kg

Rubber square profile, 13 pieces PAGUS 20 x 15 x 5000 Length: 5.0 m cross-section: 20 x 15 mm solid material Other quantities on request New ! Dimension ( single roll ): 320 x 320 x 20 mm Dimension ( packaging ): 380 x 380 x 320 mm

Max. punching capacity: 600 kN Max. shear power: 800 kN Punches 27 mm holes in 16 mm steel Shears on the flat steel shears to 400 mm up to material thickness of 16 mm steel Hydraulic hold-down device on flat steel shears Further technical data on request With an assortment of punches and dies as desired Weight: approx. 2,000 kg

Profile rail guide, pneumatic, clamping element ZIMMER MK4505AK/03 Holding force: 2250 N Base plate: 120 x 49 mm New ! Dimensions: 126 x 97 x 52 mm

Profile rail guide with one carriage DRECKSHAGE HGW25CCH 1 trolley: 70 x 58 mm Profile rail: 23 x 22 x 235 mm New ! Dimensions: 235 x 70 x 36 mm

Profile rail guide, pneumatic, clamping element ZIMMER MK3001A Holding force: 1750 N Base plate: 90 x 40 mm unused ! Dimensions: 110 x 40 x 35 mm Dimensions (packaging): 120 x 50 x 45 mm

Profile rail, perforated, 60 pieces OBO BETTERMANN 1268 L 200 FS 1104 268 Size: 200 x 35 x 18 mm Slot width: 17mm Material thickness: 1,25 mm Profile shape: C-profile Material: Steel, strip galvanized IP65 New ! dimensions ( profile rail ): 200 x 35 x 18 mm Dimensions ( packaging ): 245 x 160 x 280 mm

Profile rail SIEMENS SIMATIC S7 6ES7 195-1GA00-0XA0 ( 6ES7195-1GA00-0XA0 ) SIMATIC DP ET 200M length: 482.6 mm New Dimensions ( packaging ): 490 x 130 x 55 mm

Round profile pliers TAKRAF, HEBEZEUGWERK SUHL ZR 05 ( ZR05 ) Load capacity: 500 kg Gripping range: 65 - 150 mm used, tested ! Dimensions: 350 x 180 x 250 mm Pictures similar!

Round profile pliers TAKRAF ZR1 1000 kg Gripping width: 100 /250 mm used, tested ! Dimensions: 500 x 500 x 180 mm

Profile steel pliers, section iron grippers TAKRAF ZP 1 ( ZP1 ) load capacity: 1000 kg gripping width: max 200 mm New ! Dimensions: 550 x 455 x 200 mm

Profile rail for ET 200M SIEMENS SIMATIC DP 6ES7 195-1GG30-0XA0 ( 6ES7195-1GG30-0XA0 ) Length: 620 mm Material: Aluminium IP65 New ! Dimensions ( profile rail ): 620 x 122.5 x 46.5 mm Dimensions ( packaging ): 625 x 130 x 55 mm

Brass round profile, round rod PAGUS Ø 20 mm Length: 3000 mm Weight: 8.0 kg New ! Dimensions: 3000 x 20 x 20 mm

Stainless steel round profile, round bar PAGUS Material: 1.4301 / 1.4307 Ø 80 mm Length: 430 mm Weight: approx. 17.5 kg New ! Dimensions: 430 x 80 x 80 mm

U-profile, protective profile PAGUS for Sick C4000 80 mm wide 4 mm galvanized steel Dimensions: 1300 x 80 x 70 mm

Profile steel shears, hand lever scissors HENRY PELS HS 7 Knife length: 260 mm Mounted on table used, tested ! Dimensions: 1350 x 650 x 1200 mm

Profile cylinders, compact cylinders, pneumatic cylinders, double-acting SMC CP95SDB32-50 piston diameter: Ø 32 mm stroke: 50 mm rod diameter: Ø 12 mm rod thread ( inner ): M10 x 1,25, length: 20 mm max. 1.0 MPa ( 10 bar ) New ! Dimensions: 197 x 46 x 46 mm

Profile cylinders, compact cylinders, pneumatic cylinders, double-acting SMC CP95SDB32-500 piston diameter: Ø 32 mm stroke: 500 mm rod diameter: Ø 12 mm rod thread ( inner ): M10 x 1,25, length: 20 mm max. 1.0 MPa ( 10 bar ) New ! Dimensions: 645 x 46 x 46 mm

Timing belt wheel with safety hub PAGUS profile: L Teeth: 18 pitch: 9,525 mm diameter: Ø 54 mm belt width: 52 mm safety hub for shaft diameter: Ø 22 mm shaft length: 72 mm groove width: 6 mm including 20 shear pins and bushings New ! Dimensions: 60 x 60 x 72 mm

Timing belt wheel with safety hub PAGUS profile: L Teeth: 18 pitch: 9,525 mm diameter: Ø 54 mm belt width: 52 mm safety hub for shaft diameter: Ø 22 mm shaft length: 72 mm groove width: 6 mm including 15 shear pins and bushings used, tested ! Dimensions: 60 x 60 x 72 mm

Frame profile EMKA PROGRAM 1074 1074-02 Length: approx. 50 m Disc width: 6 mm Sheet width: 3 mm Profile height: 16,16,2 mm Material: EPDM New ! Dimensions ( packaging ): 650 x 450 x170 mm

Sealing profile, window profile, push-in PAGUS 1003-041 3 45 7 length: approx. 27 m profile width: 10 mm profile height: 10 mm sealing lip: 8 mm New ! Dimensions ( packaging ): 550 x 400 x 100 mm

NOVOTEX Round Profile, Round Profile, Round Bar PAGUS Material: NOVOTEX New name: Textolite, Etronax, PF CC (Phenolic Woven Cotton Cloth), HGW (Phenolic Resin Hard Fabric) DIN 7735, IEC 60893 Diameter: Ø 15 - 225 mm Length: max. 1000 mm Weight: approx. 450 kg solid and hollow material Other quantities on request ! New ! Dimensions ( lattice box ): 1240 x 840 x 960 mm

Edge protection profile WÜRTH 0961 0025 Clamping range: 1 - 2 mm Cross-section (width x height): 6,6,5 x 9.5 mm outer diameter: 54.5 mm Number of rollers: 20 Roll length: 10 m Material: PVC, with metal insert Color: black Other quantities on request ! New ! Dimensions ( single roll ): 260 x 260 x 40 mm Dimensions ( packaging ): 900 x 800 x 300 mm

Corner protection profile, corner protection profile, corner protection SHG Knuffi Type A Diameter: Ø 38 mm Angle cutout: 20 x 20 mm Length: 4x 1,0 m, 1x 0.65 m, 1x 0.1 m Colour: yellow/black Mounting type: self-adhesive Material: polyurethane New ! Dimensions ( packaging ): 1000 x 100 x 100 mm

Contact Duo Profile, Series Limit Switch, Series Position Switch GELBAU 018.10 3100.0118 Profile length: 1920 mm with installation material New ! Dimensions: 2130 x 120 x 110 mm

Profile steel scissors, hand lever scissors SCHERENBAU NOSSEN ScDH 10 Knife length: 180 mm round: 24 mm square: 22 mm angle: 60 x 7 mm throughout: 10 mm mobile ! used, checked ! Dimensions: 1300 x 700 x 1600 mm

Profile steel shears, hand lever scissors NOSSENER MASCHINENBAU ScDH 10 Knife length: 180 mm Cutting capacity: Sheet metal: 10 mm Flat bar: 50 x 15 mm Round steel: Ø 24 mm Square profile: 22 x 22 mm Angle profile: 60 x 7 mm T profile: 60 x 7 mm Mounting foot: 405 x 240 mm used, tested ! Dimensions: 650 x 290 x 1850 mm

Compressive force max.: 55 kN Projection: 175 mm Punching stroke adjustable: 0 - 28 mm Number of strokes at 15 mm stroke: 30 Adjustable notch stroke: 0 - 60 mm Hydraulic drive: 380 V, 3 kW Required space: 1170 x 620 x 1470 mm Weight: 930 kg

The scope of delivery includes: 01x Rectangular tube, used Profile dimensions: approx. 50 x 30 mm Material color: orange Total length: approx. 3,660 mm Center-center hole: approx. 3,630 mm Material thickness: approx. 1.50 mm Number of boreholes: 2 pcs. Drill holeØ: approx. 10 mm Weight / pcs.: 6,150 kg Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. In addition, a desired transport or shipment of this article is with additional costs, which are charged separately depending on the place of delivery. or scope of delivery can be queried from us.

Max. punching and shearing capacity: 500 kN Punches e.g. 20 mm holes in 20 mm steel Shears on the flat steel shears on 350 mm to 13 mm steel Further technical data on request With an assortment of punches and dies as desired