profil used for sale

weight max. in kg: 250 kg arm length: 4000 mm height: 3425 Unterkante Ausleger total column height: 4.025 mm swivelling range: 270 Grad Description: - Load capacity 250 kg - projection 4000 mm - Construction height 4025 mm - Crane lacquer in color RAL 1007 daffodil yellow - Calculation basis DIN 15018 - Crane classification H2 / B2 - Operating location hall operation - Size / bracket profile LS36 / FormC 110x90 - Height of the lower edge of the boom 3425 mm - Operating voltage 3 / PE ~ 50 Hz 400 V - Direct control type of control - Degree of protection IP55 - Swivel range, nominally 270 ° - Panning by hand including: - Anchor rods size LS 36 - Consists of 8 pieces M24 mm x 800 mm, with 1 steel template (420/8) for - Fastening to the foundation, including accessories Electric chain hoist: - Chain hoist type GM 2 250.6-1, 1-leg - painted in color RAL 5017 - traffic blue - Load capacity 25 ...

sheet width: 1020 mm plate thickness: 2,5 mm daylight opening: 48 mm bending angle max.: 0 - 135 ° total power requirement: von Hand kW weight of the machine ca.: 285 kg dimensions of the machine ca.: 1,35 x 0,82 x 1,14 m Furnishing: - Universally applicable bending machine for plumbing and repair shops - Robust construction in a modern design - Easy adjustment of the upper beam using a foot pedal - Hands are free for the workpiece - Manual bending machine for standard bending tasks - Segmented upper beam for a large number of bending options - Optimal price-performance ratio - Quick and easy bending process using a bow handle - Non-slip rubber coating on the foot pedal for safe working - Easy adjustment of the lower beam to the respective sheet thickness - High upper beam for producing high-edged profiles scope of delivery - Segmented upper cheek - manual backgauge - bending segments 2 ...

cutting diameter: 300 mm capacity 90 degrees: flat: 330 x 260 mm capacity 90 degrees: square: 260 x 260 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: flat: 270 x 200 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: flat: 170 x 170 mm height of material-table: 600 mm Pitch min/max: 50.000 mm vice: 335 mm Öffnung band speed: 15 - 100 m/min automatic feeds: 600 mm dimensions of saw-band: 3.650 x 27 x 0,9 mm total power requirement: 2,2 kW weight: 1.105 kg range L-W-H: 3,3 x 2,83 x 2,23 m Electro-hydraulic fully automatic band saw, with additional: semi-automatic semi-automatic dynamic manual operation Description : - Automatic cycle (cuts from 0 ° to 60 ° left) - Semi-automatic, semi-automatic-dynamic and manual cycle - Cuts from 45 ° right to 60 ° left - Manual or semi-automatic dynamic cycle - to make cuts without programming - Numerically controlled band sa ...

Aluminum automatic saw make ELUMATEC type SA 73/25Machine -No: 20124 built in 1990for mass cutting of aluminum profilesTechnical specifications:Saw blade diameter :380 mmSaw blade bore: 32 mmCutting area: 195 x 120 mmSaw blade speed: 3000 rpm.Pivoting range:90°Feed lengths:5 - 250 mmTable size: 200 x 600 mmVoltage: 220/380V 50HzPower output: 3 kwCompressed air connection: 7 barDimensions: 2700 x 1350 x 1470mmApprox. weight: 140 kgwith- Saw blade 370 mm- Micro spray device- pneumatic material clampingused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

2 assembled aluminum circular saws make EISELE type LMS III PVMachine -No: 2224 + 2225 built in 1988xa0Technical specifications:Saw blade size: 400 x 4.0 x 40 mmCutting area 90 °: 500 x 140 mmhor. 45 ° L + R: 400 x 140 mmvertical 45 ° L: 500 x 90 mmVenetian blind box profile: 500 x 152 mm(with saw blade 410 mm)Saw blade speed: 2800 rpm.Drive power: 2.6 kWWeight per piece: 670 kgExternal dimensions per piece: 1800 x 800 x 1300 mmWith- hydr. stepless feed- Spraying device2 identical saws LMS III PV - mounted together on a base frame - for cutting larger widths and mitres 45 ° L and 45 ° R!The saws are sold together or single!If the saws are sold together, a designated cabinet is included.The saws come from a CNC controlled profiling machineThe technical. Data concerns 1 machine. When taken over and used in the now inflated state (both machines assembled opposite each other), the machi ...

: 3000 mm Working width: 360 mm roll diameter: 60,0 mm weight max. in kg: 900 kg height adjustment: 620 - 1055 mm weight: 107 kg Furnishing: - Outfeed roller conveyor with stop - Optimal aid for supporting long and heavy workpieces - Roller support steplessly height adjustable and clampable - Safe workpiece support thanks to massive and heavy duty galvanized steel rollers - Universally applicable for e.g. metal circular saws, Band saws, woodworking machines, ... - The roller conveyors consist of a stable Construction made of special profile - Problem-free and efficient material transport for the supply and removal of workpieces The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 12 - 14 Wochen ab Auftrag : Deutschland : 8200 mm : 2 mm : 2 mm : 1.5 - 2 mm : 8 : 8 : 1000 mm fully automatic bending in two ways without the need to rotate the sheet hydraulic drive BMS MULTI-Touch with automatic depth stop powered rotary shear additional rail on the bending beam material support 2x foot pedal safety equipment accoring to the control rules BG Germany 3 year warranty on stands and tension arms. Quality Made in Germany. FURTHER MODELS FROM3 UP TO12 M LENGTH AND FROM 1,25 MM UP TO 2,00 MM BENDING CAPACITY ON REQUEST. OPTIONS: Preserving material support made out of synthetics price on request Hydraulic radius adjustment (air gap adjustment) the bending capacitiy of aluminium rises up to 2,5mm price on request Extended depth 20 - 1.250 mm price on request Conical depth stop to bend conical profiles and narrow/wide bendings for easy intermateing price on reques ...

: neu : 12 - 14 Wochen ab Auftrag : Deutschland : 4010 mm : 2 mm : 1.5 mm : 1.5 - 2 mm : 3 : 3 : 1000 mm Fully automatic bending in two ways without the need to rotate the sheet Hydraulic drive BMS MULTI-Touch with automatic depth stop Powered rotary shear Additional rail on the bending beam Material support 2x foot pedal Safety equipment accoring to the control rules BG Germany 3 year warranty on stands and tension arms. Quality Made in Germany. FURTHER MODELS FROM3 UP TO12 M LENGTH AND FROM 1,25 MM UP TO 2,00 MM BENDING CAPACITY ON REQUEST. OPTIONS: Preserving material support made out of synthetics price on request Hydraulic radius adjustment (air gap adjustment) the bending capacitiy of aluminium rises up to 2,5mm price on request Extended depth 20 - 1.250 mm price on request Conical depth stop to bend conical profiles and narrow/wide bendings for easy intermateing price on requ ...

Glass bead saw / miter saw for aluminum and PVC profiles Fabr. ELUMATEC type MGS 460Fabr. -No: 20441 built in 1994Saw blade diameter max .: 300 or 250 mmSaw blade speed: 3800 rpmSection range: sh. diagramCompressed air connection: 7 barAir consumption per cycle: 10 l / minPower: 1100 WPower connection: 380 V / 50 HzOutside dimensions approx: 600 x 600 x 1200 mmWeight approx. 60 kgWith- Roller conveyor- Spraying deviceused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

: neu : 12 - 14 Wochen ab Auftrag : Deutschland : 6400 mm : 2 mm : 1.5 mm : 1.5 - 2 mm : 5 : 5 : 1000 mm fully automatic bending in two ways without the need to rotate the sheet hydraulic drive BMS MULTI-Touch with automatic depth stop powered rotary shear additional rail on the bending beam material support 2x foot pedal safety equipment accoring to the control rules BG Germany 3 year warranty on stands and tension arms. Quality Made in Germany. FURTHER MODELS FROM3 UP TO12 M LENGTH AND FROM 1,25 MM UP TO 2,00 MM BENDING CAPACITY ON REQUEST. OPTIONS: Preserving material support made out of synthetics price on request Hydraulic radius adjustment (air gap adjustment) the bending capacitiy of aluminium rises up to 2,5mm price on request Extended depth 20 - 1.250 mm price on request Conical depth stop to bend conical profiles and narrow/wide bendings for easy intermateing price on requ ...

: neu : 12 - 14 Wochen ab Auftrag : Deutschland : 6400 mm : 2 mm : 2 mm : 1.5 - 2 mm : 7 : 7 : 1000 mm fully automatic bending in two ways without the need to rotate the sheet hydraulic drive BMS MULTI-Touch with automatic depth stop powered rotary shear additional rail on the bending beam material support 2x foot pedal safety equipment accoring to the control rules BG Germany 3 year warranty on stands and tension arms. Quality Made in Germany. FURTHER MODELS FROM3 UP TO12 M LENGTH AND FROM 1,25 MM UP TO 2,00 MM BENDING CAPACITY ON REQUEST. OPTIONS: Preserving material support made out of synthetics price on request Hydraulic radius adjustment (air gap adjustment) the bending capacitiy of aluminium rises up to 2,5mm price on request Extended depth 20 - 1.250 mm price on request Conical depth stop to bend conical profiles and narrow/wide bendings for easy intermateing price on reques ...

Three-spindle copying and lock milling machine make ROTOX type KF 457Year of construction 1993the ideal machine for lock machining: profile cylinder, pusher holeand lock case on all aluminum and PVC profiles in one clampingMax. Profile width: 125 mmMax. Profile height: 50 mmCutting path: 265 x 125 mmMilling shaft vertical: 12000 rpm.Milling shaft speed horizontal: 9000 rpm.Engine speed: 2800 rpm.Drive power, 2 drive motors a: 1.5 kWExternal dimensions: 730 x 680 x 1700 mmWeight approx.: 180 kgWith- 1 vertical cutter shaft- 2 horizontal milling shaftsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

: neu : 12 - 14 Wochen ab Auftrag : Deutschland : 8020 mm : 2 mm : 1.5 mm : 8 ELECTROCINEMATIC DRIVE OF THE BENDING JOINTS millmeter precise adjustment of the clamping beam BMS MULTI-Touchcontrol electric powered rotary shear electronic depth stop flexible material supports inclined bending beam optimized geometry of the clamping beam safety equipment accoring to the control rules BG Germany 3 year warranty on stands and tension arms. Quality Made in Germany. FURTHER MODELS FROM3 UP TO12 M LENGTH AND FROM 1,25 MM UP TO 2,00 MM BENDING CAPACITY ON REQUEST. OPTIONS: Extended depth 1.250 mm price on request Conical depth stop to bend conical profiles and narrow/wide bendings for easy intermateing price on request clamping beam made out of hardox price on request Prices ex works Germany. Transport and commissioningat customers place on request. The data for this ad was created with Modul ...

: neu : 12 - 14 Wochen ab Auftrag : Deutschland : 6400 mm : 2 mm : 1.5 mm : 6 ELECTROCINEMATIC DRIVE OF THE BENDING JOINTS millmeter precise adjustment of the clamping beam BMS MULTI-Touchcontrol electric powered rotary shear electronic depth stop flexible material supports inclined bending beam optimized geometry of the clamping beam safety equipment accoring to the control rules BG Germany 3 year warranty on stands and tension arms. Quality Made in Germany. FURTHER MODELS FROM3 UP TO12 M LENGTH AND FROM 1,25 MM UP TO 2,00 MM BENDING CAPACITY ON REQUEST. OPTIONS: Extended depth 1.250 mm price on request Conical depth stop to bend conical profiles and narrow/wide bendings for easy intermateing price on request clamping beam made out of hardox price on request Prices ex works Germany. Transport and commissioningat customers place on request. The data for this ad was created with Modul ...

saw blade diameter: 400 x 32 x 4 mm turning speeds: 3400 U/min : 160 x 130 mm Capacity 45° rectangular: 125 x 125 mm voltage: 380 V operating pressure: 6 - 8 bar total power requirement: 1,5 / 2,0 kW weight of the machine ca.: 100 kg dimensions of the machine ca.: 710 x 810 x 1400 mm Standard Accessories Mitre left & right up to 45°, 30°, 22.5°, 15°, 0° location points Intermediate angles via manual lock Twin horizontal pneumatic clamps Pressure regulator for clamps On/Off switch for clamps Machine stand Air gun included Precision angle cutting Ideal for commercial aluminium and general profile cutting Standard conveyor (2 mt. right) Durable cast hub Optional Equipment Measuring conveyor in the desired size (3-6 m right) Assistant conveyor in desired sizes (3-6 m left) 1500 mm long, double-sized caliper bracket Pneumatic and automatic working system  ...

Copy milling machine for Alu Fabr. ELUMATEC type KF 187Machine -No: 20030 Year 1985with large milling areaMilling range: 240 x 420 mmStroke: 240 mmClamping range of profiles: 250 x 250 mmMilling speed: 12000 rpm.Air consumption p. Working stroke: 12/32 lDrive power: 740 wattsAir connection: 7 barPower connection: 380 V / 50 HzWeight approx: 260 kgExternal dimensions approx. 1000x1000x1400 mmWith- Spraying device- pneumatic tensioning device- large stencil and milling area- pneumatic copy pin movement and milling depth adjustment- turret depth stop for different cutting depthsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

saw blade diameter: 400 x 32 x 4 mm turning speeds: 3580 U/min : 150 x 100 mm : 120 x 120 mm Capacity 45° rectangular: 130 x 80 mm : 100 x 100 mm operating pressure: 6 - 8 bar voltage: 380 V total power requirement: 1,5 / 2,0 kW weight of the machine ca.: 132 kg dimensions of the machine ca.: 720 x 760 x 1330 mm Standard Accessories Two hand safety operation Mitres up to 45° Right & Left 45°-30°-22.5°-15°-0° location points Intermediate angles via lock handle Easy access blade change Movable back-fence for larger cutting capacity Protective hood with safety switch Hydro pneumatic blade feed for smooth cutting (fully adjustable) Pneumatic twin vertical clamps Air dust gun included Roller support table included (2m) High quality blade included Spray mist blade lubricator (optional) Horizontal clamps (optional) Optional Equipment Hydro-check for cutting  ...

cutting diameter: 460 mm saw band length: 5200 x 41 x 1,3 mm cutting width: 470 mm : 460 mm Capacity 90° rectangular: 470 x 460 mm cutting speed: 20 - 100 m/min total power requirement: 5,2 kW weight of the machine ca.: 1,66 t dimensions of the machine ca.: 3,1 x 3,1 x 1,8 m Fully automatic band saw for cutting solid material, tubes and profiles of steel, cast-iron, light and non ferrous materials, at 90°. Entirely made of steel. The rear jaw of the hydraulic vice has a number of hardened rollers that are turned by an electric motor. The front jaw consist of a number of free running rollers. Once the work piece is clamped between the rollers no further clamping is needed. The material is fed through the vice to the material stop which contains a micro-switch controlling the feed motor. A counter controls the number of cuts. Should the blade brake the machines stop automatically. The ma ...

Double-spindle copy milling machine make ELUMATEC type KF 78/60Processing size vertical milling unit: 100 x 290 mm stroke 120 mmProcessing size horizontal milling unit: 70 x 270 mm stroke 80 mmSpeed of the milling spindle: 12000 rpm.Copy ratio: 1Compressed air connection: 7 barAir consumption approx. 200 l / minClamping range of profiles W x H: 150 x 150 mmDrive power per motor: 740 W / 1 PSDimensions L x W x H approx: 900 x 800 x 1500 mmWeight approx. 250 kgWith- Footswitch- Spraying deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

grinding length: 600 mm grinding width: 500 mm workpiece height: 500 mm table-size: 800x400 mm table speeds: 1-35 m/min grinding wheel diameter: 400 mm spindle drive: 11 kW weight of the machine ca.: 4.5 t SURFACE % PROFILE GRINDING MACHINE magnetic plate 600x300mm Dresser on table Exhausting device More details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Centreless grinding machine GHIRINGHELLI M2150 CNC 4 axes grinding wheel 200x610 CNC 4 axes Variable speed drive on grinding wheel complete overhaul with electric / electronic retrofit Machine in our warehouse in Gussago BS Mimu machine tools (Italy), Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers, cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc., During centerless plunge grinding, the workpiece is ground in one pass, thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece, to work which is given to them with the aid of a tool., The through-feed grinding or also through grinding and longitudinal grinding: pieces, ï ...

Three-spindle copy and lock milling machine make ROTOX type KF 457Fabr. -No: 457 6870, year of construction approx. 1994Technical specifications:Max. Profile width: 125 mmMax. Profile height: 50 mmMilling path: 265 x 125 mmMilling shaft vertical: 12000 rpm.Milling shaft speed horizontal: 9000 rpm.Engine speed: 2800 rpm.Drive power, 2 drive motors each: 1.5 kWExternal dimensions: 730 x 680 x 1700 mmWeight approx: 180 kgusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Shaper cutters from Module 1 to Module 14 available: - different no. of teeth, different pressure anles, different profiles, bores and sizes! shaft cutters Module 1-3 = 150 Euro, 4-5 = 250 Euro, >5 = 300 Euro disc cutters Module 1-3 = 150 Euro, 4-6 = 200 Euro, 7-10 = 250 Euro, 10-14 = 300 Euro. complete list on request! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ghiringhelli M500 SP600 MIA, centerless grinding machine, Grinding wheel width: 650mm, Grinding wheel Diameter: 600mm, Grinding wheel motor 75kW, Overhaul and CNC retrofit possible. Feel free to ask for more info., It can be inspected in our warehouse in Gussago BS (Italy), Mimu machine tools, Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc. During centerless plunge grinding, the workpiece is ground in one pass thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece to work which is given to them with the aid of a tool. The through-feed grinding or also through grinding and longitudinal grinding: pieces to be worked proceed uninterruptedly w ...

Aluminum single-spindle copy router make ELU type AS 70Fabr. -No: 28736, built in 1980Technical specifications:Milling length: 250 mmMilling width: 100 mmlargest clampable profile width: 170 mmlargest clampable profile height: 100 (135) mmMilling spindle speed approx .: 12000 rpm.Collet diameter: 8.0 mmDrive power: 740 W.Power connection: 380 V / 50 HzCompressed air condition f. clamping and spraying: 150 l / minat: 5 - 8 atüExternal dimensions: 720 x 650 x 1440 mmWeight approx: 100 kgusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Aluminum single-spindle copy router make ELU type AS 70Serial -No: 70425, year of manufacture 1983Technical specifications:Milling length: 250 mmMilling width: 100 mmlargest clampable profile width: 170 mmlargest clampable profile height: 100 (135) mmMilling spindle speed approx.: 12000 rpm.Collet diameter: 8.0 mmDrive power: 740 WPower connection: 380 V / 50 Hzcompressed air cond. f. Clamping and spraying: 150 l/minat:5 - 8 atmExternal dimensions: 720 x 650 x 1440 mmWeight approx.: 100 kgusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

max. wheel diameter: 2500 mm gear width: 1200 mm max. module: 32 min. module: 3 total power requirement: 25 kW weight of the machine ca.: 60 t dimensions of the machine ca.: m Gear , min. / max. 180 / 2,500 mm Module 3 - 32 Helix angle, max. 10 - 35 ° Gear width for straight gears 1,200 mm Stroke length, approx. 100 - 1,200 mm No. of strokes 80 - 350 /min Stroke position adjustable 300 mm Stroke speed 4 - 40 mm Max. weight of workpiece, approx. 18,000 kg Min. / max. no. of teeth 16 / 576 Table size x bore 1,400 x 500 mm Grinding wheel Ø, approx. 500 mm Grinding wheel peripheral speed 34 m/s Total electrical load, approx. 45 kW - 380 V - 50 Hz Weight of machine, approx. 60,000 kg Accessories / Special Features: Hydrostatic guides in grinding slide, table and in all other guideways. Completely covered working area with sliding doors. Automatic grinding process for various cycles, with ...

grinding length: 750 mm grinding width: 500 mm workpiece height: 500 mm total power requirement: 50 kW weight of the machine ca.: 5000 t Grinding length, max. 750 mm Grinding width, max. 500 mm Cross movement of grinding slide 450 mm Working height under grinding wheel, max. 500 mm Grinding wheel size Æ 400 x 100 mm Grinding wheel speeds, infinitely variable 300-3,000 rpm Table speed, hydr. 0 - 30 m/min Table speed, creep feed 0.02 - 1,000 mm/min Vertical infeed, infinitely variable 0.002 - 0.03 mm/stroke Grinding spindle drive, max. 32 kW Total electrical load, approx. 50 kW - 380 V - 50 Hz Weight approx. 5,000 kg Accessories / Special Features Creep feed: Electro-mechanical feed (but also hydraulic table movement), with digital display, programable by cam limit switches. Infinit ...

Door belt drilling machine make ELUMATEC type TBM 126Fabr. -No: 20041, built in 1994Technical specifications:Machine bed length: 3000 mmClamping range profile width sash: 108 mmClamping range Profile width Frame: 200 mmProfile height: 45 - 80 mmMax. Insert length: 2400 mmSpindle speed: 1900 rpm.Compressed air connection: 7 barAir consumption per working cycle: 12/24 lDrive power: 740 WVoltage: 380 V ,, 50 HzDimensions L x W x H: 3000 x 750 x 1650 mmWeight approx. 350 kgvery little used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

grinding diameter: 100 mm grinding length: 250 mm feed in: 200 mm working area: mm speed: m/min Bar length: mm total power requirement: 25 kW weight of the machine ca.: 4.500 kg dimensions of the machine ca.: m K O E N I G & B A U E R (Germany) Centreless Grinder with Plunge-in Grinding Device Model Multimat 150 - 5 Year approx. 1978 S/Nr. 73 918 _______________________________________________________ Grinding Ø regular/maximal 2 – 50/100 mm Max. length of workpiece for Thru-Feed-grinding 250 mm Max. length of workpiece for plunge-cut grinding 200 mm Grinding wheel size, Ø x width 600 x 200 mm Regulating wheel size, Ø x width 300 x 200 mm Grinding wheel speed, max. 1.450 rpm/35 m/sec. Regulating wheel speeds (stepless) 10 – 140/230 rpm Regulating wheel tilt plus/minus  ...

Door belt drilling machine make ELUMATEC type TBM 126Fabr. -No: 20092, built in 1995Machine bed length: 3000 mmClamping range profile width sash: 108 mmClamping range Profile width Frame: 200 mmProfile height: 45 - 80 mmMax. Insert length for wings: 2400 mmSpindle speed: 1900 rpm.Compressed air connection: 7.0 barAir consumption per working cycle: 12/24 lDrive power: 740 WPower connection: 380 V ,, 50 HzDimensions L x W x H: 3090 x 860 x 1690 mmWeight approx .:370 kgWith- 4 collets- 3 hori. tensioners- 1 stop each on the right and left- Footswitchvery little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

max. wheel diameter: 400 mm gear width: 500 mm max. module: 15 min. module: 0,5 total power requirement: 2,5 kW weight of the machine ca.: 2 t dimensions of the machine ca.: m H O E F L E R (Germany) CNC Controlled 4 Axis Inspection Centre for Gears Model EMZ 400 Year 1988 Serial No. 067 047 ____________________________________________________ Working range: Min./max. gear Ø / base circle Ø 0 – 400 / 390 mm Module range 0.5 – 15 Gear width, max. 500 mm Travel of measuring head, approx. +/- 180 mm Helix angle 0 – 60 ° Max. weight of workpiece, approx. 250 kg Distance between centres, approx. 1,000 mm Distance between centre and body of counter steady 205 mm Table Ø, approx. 290 mm Plotter diagram scales 50 / 1 ...

height of profile: 60 mm : 60 weight of the machine ca.: 188 kg dimensions of the machine ca.: 0,85 x 0,45 x 1,25 m foot switch: - Fabr.-No.: 292539 - pneumatic clamping head The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Door belt drilling machine make ELUMATEC type TBM 126Fabr. -No: 20087, built in 1997Machine bed length: 3000 mmClamping range profile width sash: 108 mmClamping range Profile width Frame: 200 mmProfile height: 45 - 80 mmMax. Insert length: 2400 mmSpindle speed: 1900 rpm.Compressed air connection: 7 barAir consumption per working cycle: 12/24 lDrive power: 740 WVoltage: 380 V ,, 50 HzDimensions L x W x H: 3000 x 750 x 1650 mmWeight approx. 350 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

max. wheel diameter: 0 mm gear width: 120 mm max. module: 3 min. module: 1 total power requirement: 20 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: m : : : : : : 5 machines in stock, YOM: between 1986 and 1990 Gear Æ, min./max. 55 / 120 mm Gear Æ for shaft-formed parts 80 mm Module (pitch 25.4 - 8.5) 1 - 3 No. of teeth, min./max. 13 / 80 Pressure angle 14 - 30 ° Helix angle, max. 40 ° Workpiece clamping length 145 - 420 mm Grinding worm Æ 300 - 400 mm Grinding worm width 25 - 40 mm Grinding worm speeds, infinitely variable (35 m/s) 1,650 rpm Feed range 0.4 - 4 mm/rev Total electrical load 20 kW - 380 V - 50 Hz Weight 7,500 kg Accessories / Special Features REISHAUE ...

cutting diameter: 380 mm saw band length: 4800 x 34 x 1,1 mm cutting width: 430 mm : 380 mm Capacity 90° rectangular: 430 x 380 mm speeds steplessly adjustable: 20 - 100 m/min total power requirement: 4,2 kW weight of the machine ca.: 1,34 t dimensions of the machine ca.: 2,9 x 0,95 x 1,66 m Fully automatic band saw for cutting solid material, tubes and profiles of steel, cast-iron, light and non ferrous materials, at 90°. Entirely made of steel. The rear jaw of the hydraulic vice has a number of hardened rollers that are turned by an electric motor. The front jaw consist of a number of free running rollers. Once the work piece is clamped between the rollers no further clamping is needed. The material is fed through the vice to the material stop which contains a micro-switch controlling the feed motor. A counter controls the number of cuts. Should the blade brake the machines stop auto ...

CNC double miter saw make ANTON type ADS-ENMachine -No: 39091, built in 1991For efficient sawing of aluminum and PVC profilesSaw blade diameter: 450 x 30 mmFeed infinitely variableAir consumption: 7 atm 200 l / minBlade speed: 2800 rpm.Cutting length: 260 - 5000 mmCutting area square: 265 x 100 mmCutting area round: 150 mmDrive power: 2 x 2.25 kWExternal dimensions: 6150 x 1200 x 1750 mmWeight: 1460 kgWith:- Control De Man 408- automatic pivoting from 45 ° to 90 °used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

pressure: 28 t stroke: 180 mm table-size: 300 x 550 mm total power requirement: 4 kW weight of the machine ca.: 0,650 t diameter of piston: 180 mm working feed: 2 mm/sec return speed: 20 mm/sec pressure capacity max.: 200 bar toolpiece height min.: 200 mm dimensions of the machine ca.: 1150 x 750 x 1103 mm This horizontal straightening press is designed for a wide variety of bending, profiling and straightening operations. ? ?The application of this Profi Press horizontal bending / straightening press varies depending on the accessories that can be installed on the worktable, on the tool mount and in the punch- and pin holes. This Profi Press model, the HB-28, is equipped with an angular graduation on the worktable for easy bend measurements and this horizontal press can be delivered with several tools (for example block punches) that can be mounted on the tool mount and tools that can b ...

cutting diameter: 350 mm saw band length: 4160 mm cutting width: 400 mm : 350 mm : 350 x 350 mm Capacity 90° rectangular: 400 x 350 mm speed: 20 -100 m/min main drive: 2,2 kW hydraulic pump: 0,37 kW coolant pump: 0,12 kW dimensions of saw-band: 4160 x 34 x 1,1 mm work height max.: 860 mm total power requirement: 2,9 kW weight of the machine ca.: 1030 kg dimensions of the machine ca.: 2,23 x 0,88 x 1,89 m Description: • Fully automatic miter band saw for sawing thick-walled Profiles and solid materials • Motorized roll feed of the material with electrical contact stop • Delta touch screen controls • Miter cutting, up to 45 ° • 1 program with 10 steps • Length accuracy 0.5 mm The feed length of the material is manually adjustable via an Microswitches selected that • Robustly constructed monoblock saw frame with hydraulic vertical movement and linear guide • Rapid advanc ...

Double miter saw make ELU type DG 102Machine -No: 23122 built in 1981for efficient sawing of aluminum profilesSaw blade diameter: 420 mmCutting area straight for profiles approx: 100 x 240 mmxa0xa0xa0 at 45 ° approx.: 100 x 180 mmSection length up to: 4500 mmSaw blade speed: 2800 rpm.Saw blade motor: 2800 rpm, 3 kW eachelec. Connection: 380 V, 6 kWDimensions: 1200 x 6000 x 1350 mmWeight approx: 1000 kgWith- compl. elec. and pneumatic. Facility- pneumatic. tensioning device- 2.5 m roller conveyor on movable saw carriage- saw bladesused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

cutting diameter: 560 mm saw band length: 6000 x 41 x 1,3 mm cutting width: 570 mm : 560 x 560 mm Capacity 90° rectangular: 570 x 560 mm speeds steplessly adjustable: 20 - 100 m/min total power requirement: 6,0 kW weight of the machine ca.: 2,24 t dimensions of the machine ca.: 3,5 x 1,05 x 2,05 m Fully automatic band saw for cutting solid material, tubes and profiles of steel, cast-iron, light and non ferrous materials, at 90°. Entirely made of steel. The rear jaw of the hydraulic vice has a number of hardened rollers that are turned by an electric motor. The front jaw consist of a number of free running rollers. Once the work piece is clamped between the rollers no further clamping is needed. The material is fed through the vice to the material stop which contains a micro-switch controlling the feed motor. A counter controls the number of cuts. Should the blade brake the machines sto ...

Corner cleaning machine for automatic deburring of weldson welded plastic frame make ROTOX type EPA 277Machine -No: 277 6217 Year 1992Max. Profile size: 160 x 150 mmminute Profile size: 30 x 30 mmFrame size min.:320 x 320 mmAir consumption: 200 l / minAir pressure: 6 - 8 barConnected load: 2.2 kWPower connection: 380 V, 50 HzWeight approx: 900 kgWith- aut. profile recognition- Profile edition page selectable- electronic PLC control- minimal processing timelittle used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

saw blade diameter: 500 x 32 x 4 mm turning speeds: 3580 U/min : 230 x 180 mm : 135 x 135 mm Capacity 45° rectangular: 165 x 180 mm : 115 x115 mm operating pressure: 6 - 8 bar voltage: 380 V total power requirement: 3,0 / 4,0 kW weight of the machine ca.: 220 kg dimensions of the machine ca.: 980 x 1130 x 1430 mm Standard Accessories Two hand safety operation Mitres up to 45° Right & Left 45°-30°-22.5°-15°-0° location points Intermediate angles via lock handle Easy access blade change Movable back-fence for larger cutting capacity Protective hood with safety switch Hydro pneumatic blade feed for smooth cutting (fully adjustable) Pneumatic twin vertical clamps Air dust gun included Roller support table included (2m) High quality blade included Spray mist blade lubricator (optional) Horizontal clamps (optional) Optional Equipment Hydro-check for cutting ...

tube diameter: 16 - 76 mm grinding band dimension: 100 x 2000 mm Band Speed: 30 m/min. voltage: 400 V angle adjustable from - to: 30 - 90 Grad power capacity - grinding motor: 2,2 kW range L-W-H: 1250 x 700 x 12500 mm weight: 170 kg Standard Accessories For tubes and profiles made of metal Simplified opera on by twistable grinding fixture Adequate for tube diameter from 1/ 2” to 2 1/ 2” Quick adjustment for grinding angle 30° – 90° Powerful motor 2,2 kW / 380 V Abrasive roll easy and fast changeable Because of tape speeds of 30m/s perfect fi ng for steel and material Vibration reduced stand The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 550 x 32 x 4 mm turning speeds: 3580 U/min : 260 x 200 mm : 155 x 155 mm Capacity 45° rectangular: 180 x 200 mm : 130 x 130 mm operating pressure: 6 - 8 bar voltage: 380 V total power requirement: 3 / 4 kW weight of the machine ca.: 220 kg dimensions of the machine ca.: 980 x 1130 x 1430 mm Standard Accessories Two hand safety operation Mitres up to 45° Right & Left 45°-30°-22.5°-15°-0° location points Intermediate angles via lock handle Easy access blade change Movable back-fence for larger cutting capacity Protective hood with safety switch Hydro pneumatic blade feed for smooth cutting (fully adjustable) Pneumatic twin vertical clamps Air dust gun included Roller support table included (2m) High quality blade included Spray mist blade lubricator (optional) Horizontal clamps (optional) Optional Equipment Hydro-check for cutting al ...

cutting diameter: 320 mm saw band length: 3660 x 27 x 0,9 mm cutting width: 350 mm cutting capacity - round: 90° / 320 mm cutting capacity - flat: 90° / 350 x 320 mm cutting capacity - square: 90° /320 mm speed: 20 - 100 m/min : 260 mm capacity 45 degrees: flat: 250 x 180 mm : 180 mm : 160 mm : 150 x 150 mm : 150 mm total power requirement: 1,5 kW weight of the machine ca.: 1,1 t dimensions of the machine ca.: 1900 x 1200 x 1350 m 280G,320G and 320GL are durable and stably laid out for universal separetion from full materials,pipes and profiles.A fast and precise mitre adjustment is characteristic within the range of 90 deg to 30 deg.The sawing property is situated in-line and becomes manuel strained in the angle of 90 deg. The machines are fitted with a removable coolant tank incorporating a submerged electric coolant pump which supplies coolant to both guide assemblies. These models ...

cutting diameter: 270 mm saw band length: 3160 x 27 x 0,9 mm cutting width: 350 mm Capacity 90° rectangular: 350 x 230 mm : 210 mm Capacity 45° rectangular: 270 x 200 mm : 170 x 170 mm capacity 60 degrees: round: 150 mm capacity 60 degrees: flat: 150 x 100 mm capacity 60 degrees: square: 100 x 100 mm speeds steplessly adjustable: 20 - 100 m/min total power requirement: 2,0 kW weight of the machine ca.: 476 kg dimensions of the machine ca.: 1,73 x 0,77 x 1,46 m Machine description : • semi-automatic double miter for cutting profiles and Solid material in steel and non-ferrous material and excellent price-performance ratio • robust constructed monoblock saw frame • manually swiveling saw frame with hydraulic clamping for optimal Miter (not BMSY 270 DGH ) • miter on mobile control panel digitally readable (not BMSY 270 DGH ) • Hydraulic clamping of the horizontal vise • auto ...

Belt grinding machine GRIT GI 150 2H, switchableSerial -No: 1121152 Year 2011with surface grinding module GIL and radius grinding module GIRTechnical specifications:BELT SANDERBelt dimensions approx.: 150 x 2000 mmSpeed: 3450 rpm.Voltage: 3 x 400/440V 50/60HzWeight approx. 80.6 kgwith- Machine foot GIB Serial-No: 1120014 year of manufacture 2011 Weight approx. 17 kgSURFACE GRINDING MODULE GILSerial-No: 1114072 built in 2011Tape dimensions approx.: 150 x 2000 mmDimensions of profiles/flat material max.: 100 x 100 mmVoltage: 3 x 400V 50/60HzApprox. weight: 69 kgfor longitudinal grinding of square tubes, profiles and flat materialsRADIAL GRINDING MODULE GIRSerial-No: 1124121 year of manufacture 2011Band dimensions approx.: 150 x 2250 mmDimensions of profiles/flat material max.: 120 x 150 mmTubes up to diameter: 20 - 150 mmWeight approx. 109 kgwith- integrated depth stop for series usefor  ...

Optical Profile Grinding Machine Fabr. HOMMEL Werke Type OPSMMasch. -No: 326 built in 1970infinitely adjustable magnification 10:1 to 50:1usable projection area 380 x 420 mmClamping area 450 x 200 mmlargest sandable workpiece thickness 85 mmInclination up to 30 °Rotation of the grinding head + - 15 °Swiveling of the grinding head + - 10 °Grinding wheel diameter min./max. 100 / 150 mminfinitely variable speeds 2800 - 5000 rpm.Connected load 2.0 kWWeight approx 1.7 tlittle used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Grinding length: 0 mm Grinding width: 0 mm Grinding height: 0 mm Wheel diameter: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 1520 mm Table width: 300 mm Number of T-channels: 3 T-channel width: 14H7 mm Distance of the T-slots: 80 mm Clamping surface Length Grinding length: 1200 mm Grinding width: 400 mm Execution: hydraulic Max. distance from table to spindle-centreline: 500 mm Longitudinal travel (X-axis): 1280 mm Transversal travel (y axis): 350 mm Automatic cross-feed: stepless from: 0 m/min up to: 7 m/min Table speeds: stepless from: 0.3 m/min up to: 30 m/min Automatic vertical feed: from: 0.0001 mm up to: 0.0010 mm Diameter of grinding wheel: 400 mm Width of the grinding wheel: 80 mm Wheel int. diameter: 127 mm Grinding wheel speeds: from: 1480 rpm Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 7.5 kW Machine´s weight about: 3700 kg Overall dimensions mach ...