profil used for sale

Used pneumatic press 4 KN -Pressing force 4 KN (0.4 to) -Pneumatic cylinder make Festo -Pneumatic two-hand control - press plate made in 4 Guide pillars -Work surface between guide columns 200 220 mm -Machine table made of aluminium profiles and PA plate 600 600 60 mm -3-sided walls from Plexiglas -Total weight approx. 70 kg Suitable for stamping or embossing tools or plate bonding.

Horizontal baler Manufacturer: MEPAC Type: 30-18 Operating hours: approx. 10 Built: 2014 technical data: Pressure: 220 kN/22 to Filling opening: approx. 1,500 x 900 mm E-connector: 7.5kW 400V 50Hz, 3 Ph/N/PE Connection: CEKON plug 32A Bale dimensions: 970 x 770 x approx. 1,150 mm (W x H x L) Bale output height: 200 mm from the ground Bale weight: up to approx. 450 kg depending on material and length Machine dimensions: approx. 5900x1700x2000 mm (L x W x H) Machine weight: approx. 2000 kg Colour: light blue according to RAL 5012 Execution with: - hyrdaulian front door and - 2 pieces of hydraulic lids for closing the filling box - Binding by hand with polyester tape Description: Stable all-steel welded construction with edge profiles in a compact design. Robust electro-hydraulic, maintenance-free drive ensures easy and effo ...

Technical data: -For punching into SCHÃ?CO - profile systems - air consumption per stroke 18 l -Air inlet 8 bar -Space requirement approx. B H 700 x 1250 X 500 mm -Weight approx. 100 kg -with:-foot switch -Original - machine base

HF FeinfräÃ? & - grinding spindle, manufacturer Fischer Schaffhausen. Designation; MFVS 830, Series number: EL-S-007 The spindle is undamaged, unused and in their original packaging. The spindle can be used with electrodes and-precision Strausak type. 82 CNC. or as RF - internal grinding spindle. Tech. Data.: 220 V 600 HZ 4-pin 2.5 KVA 1.4 KW / 600 HZ for further information: The grinding technology: Tool &-profile grinding coarser has in 2001 of the production & - Strausak license rights wage purchased. The rights include the complete series 57 U/W, 57 U CNC, 57 W CNC 3.-4.u-5-axis, and from this all developed machines.

Technical data: -Bending mot. Automatic or manual mode -Bending performance square steel ST 37 up to approx. 25 mm -Bending performance ST 37 steel up to approx. 30 x 8 mm -Bending length betw. the adjustable 1000 mm turning units -Faceplate with various recording profile perforations -Tailstock / recovery storage -Delay start bending / bending length twisting preselection - right - left rotation -Space requirement approx. B 1750 x H 1100 X 500 mm -Drive 400 V / 0,75 kW -Weight approx. 150 kg

Edge banding machine OTT Type: ATLANTIC V 6 B.J.: 1998 Glue unit / also polyurethane adhesive can be Cut from the edge Green cut front and rear Simple milling Profile milling Profile cyclin Simple cyclin Speed 12 m / min Overall dimensions: 0.400 cm, 95 cm wide, 130 cm high; Weight: 1,400 kg

Capacity: 120kg of green coffee per roast (480kg per hour) Roasting time: 12-15 minutes Voltage: 400V, 3 phase (other voltages by request) Pneumatic green coffee loader, destoner and cyclone included Optional afterburner Gas: natural gas/LPG Burner: Weishaupt (indirect) The roaster is currently disassembled and ready for refurbishing. It will be completely refurbished featuring: new insulation new bearings new direct drive motors with speed control on the destoner, drum and exhaust fan new pneumatics new electric cabinet and controls (optional: PLC and touchscreen with automatic roasting and profililng) new cooling bin sheathing new modulated Weishaupt burner (other makes by request) new paint (powder coating) Inspection of the roaster is possible at any time Photos of a Probat G60 coffee roaster after refurbishing are also included, as an example of how the G120 ...

Fristam FPE1232/185A 30 kW pump capacity: 50.000 - 200.000 l/h The specific profile of their impellers provide for a steady, smooth flow with minimal secondary swirl even at high flow rates. Universal use, gentle product handling, robust, easy to maintain, durable, economical. The Fristam FP’s well-thought-out design provides you with the optimal solution to your specific requirements. Fristam pumps FP are designed with open impellers, with narrow gaps between the impellers and the cover. Combined with the flow-optimised pumping channel, these ensure minimal secondary flow, very gentle product handling even at high volumetric flows, and energy-saving operation. The FPs’ design makes them ideal for hygienic applications. The pumped medium may be homogenous, or contain air, gases or suspended solids.

Used agitator 3.0 KW with long stirring shaft 1700 mm With beam in aluminium profiles 45 45 mm. Electric motor: Siemens 3.0 KW, 3 x 230/400 volts, 1420 RPM., IP55. Weight approx. 35 kg. Shaft: precision stainless steel shaft D28, length 1700 mm, diameter 28/30 mm Material stainless steel 1.4301. With 2 rigid couplings stainless steel 1.4301. Stirrer: Prismatic blade, length 300 mm, material 1.4301 stainless steel / polyamide.

WAUKESHA UNIVERSAL II (U2) model: 030-UII , capacity 8.2 m3/h output pressure 17.2 bar Waukesha Cherry-Burrell Universal 2 Series hygienic pumps with rotating pistons are characterized by reliability, gentle unpulsive pumping of products with a wide range of viscosities. The special rotor profile and fixed cross-section of the working chamber ensure no pulsation, no turbulence and gentle pressing of the product without destroying the structure or desired solids. Unlike cam pumps, the Waukesha pump with rotating pistons has only rotor tolerances to the stationary body and pump cover. They used a special non-rubbing material of rotors, thanks to which it was possible to significantly reduce internal tolerances. In addition, the seal line is extended compared to ordinary pumps. As a result, reverse leakage is minimized even with low viscosity fluids and the pump runs smoothly  ...

Capacity: 120kg of green coffee per roast (480kg per hour) Roasting time: 12-15 minutes Voltage: 400V, 3 phase (other voltages by request) Pneumatic green coffee loader, destoner and cyclone included Optional afterburner Gas: natural gas/LPG Burner: Probat - direct The roaster is currently disassembled and ready for refurbishing. It will be completely refurbished featuring: new insulation new bearings new direct drive motors with speed control on the destoner, drum and exhaust fan new pneumatics new electric cabinet and controls (optional: PLC and touchscreen with automatic roasting and profililng) new cooling bin sheathing modulation of the burner will be installed new paint (powder coating) Inspection of the roaster is possible at any time. Photos of a Probat G60 coffee roaster after refurbishing are also included, as an example of how the G120 will look like.

We offer you here a used workbench of the manufacturer Jung Heinrich for sale. Workbench depth: 600 mm Technical data for the workbench: Manufacturer: Jung Heinrich Type: Esmena The scope of delivery includes: 02x workbench stand, used Material color: dark green or blue Stand profile: 76.2 x 74.7 mm Stand height: 900 mm Stand depth: 600 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( screwed half-timbering ) 02x workbench traverses, used Material color: orange Box profile: 85 x 40 mm clear width: 2,775 mm 04x locking pins, used Version: completely galvanized 06x drill screws, new Version: galvanized Dimensions: 6.3 x 70 mm 01x chipboard II. choice, used Thickness chipboard: 38 mm Width chipboard: 2,950 mm Depth chipboard: 600 mm Chipboard if necessary two-part The images serve  ...

We offer you here a used workbench of the manufacturer Jung Heinrich for sale. You can freely choose between the following workbench depths: Workbench depth: 800 mm Technical data for the workbench: Manufacturer: Jung Heinrich Type: Esmena The scope of delivery includes: 02x workbench stand, used Material color: dark green or blue Stand profile: 76.2 x 74.7 mm Stand height: 900 mm Stand depth: 800 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( screwed half-timbering ) 02x workbench traverses, used Material color: orange Box profile: 85 x 40 mm clear width: 2,775 mm 04x locking pins, used Version: completely galvanized 06x drill screws, new Version: galvanized Dimensions: 6.3 x 70 mm 01x chipboard II. choice, used Thickness chipboard: 38 mm Width chipboard: 2,950 mm Depth chipbo ...

Your contact person in our company: Lord: Andre Evering Lord: Marcel Brahms Lord: Simon Blank We offer you a used pallet rack here manufacturer Hovuma. Specifications for the pallet shelf traverse: Shelving system: Hovuma Included in the scope of delivery are: 01x Pallet rack trusses, used Material color: green Design: ground/head traverse INP profile: 100 x 50 mm Agraffe: 2 hooks clear width: 3,380 mm max. load per truss pair 2,250 kg, at the same time. distributed load 02x Safety pins, used Execution: complete. Galvanised To secure the longitudinal beams against unintentional lifting Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspection in accordance with DIN EN 15635 carried out in accordance with the Requirements of the BGR 234 visual  ...

<b>Properties:</b> Used pallet roller conveyor Material: Steel (galvanized) Color: Silver Expertly disassembled and packed Modular system for the conveying of Euro pallets The facility consists of 103 segments: 91 piece x 2.495 mm 12 PCs x 2,390 mm <b>technical data</b> Pallet roller conveyor dimensions approx. Total width: 915 mm Width: 850 mm Length: 105mm Rolling cross section: 60 mm Material: Steel Profiles: 80 x 30/40 per segment there are 4 brake roller Roll diameter: approx: 80 mm <b>Pallet roller conveyor</b> Thanks to the superb craftsmanship of the pallet roller conveyor glides your material, even under high load, gently to the place of destination. <b>Tailor-made solutions for your intralogistics</b> We are your competent partner for roller conveyors, belt lifts, inclined conveyors or telescopes to t ...

We offer you here a used workbench frame of the manufacturer Jung Heinrich for sale. Workbench depth: 600 mm Technical data on the workbench frame: Manufacturer: Jung Heinrich Type: Esmena The scope of delivery includes: 02x workbench stand, used Material color: dark green or blue Stand profile: 76.2 x 74.7 mm Stand height: 900 mm Stand depth: 600 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( screwed half-timbering ) 02x workbench traverses, used Material color: orange Box profile: 85 x 40 mm clear width: 2,775 mm 04x locking pins, used Version: completely galvanized The images serve to illustrate the material. The material color may differ if necessary. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 workin ...

Qty. 1 Second-hand polishing machine Mfc.: Madar Aluminium Built: 2010 Type: PM 2000 Overhauled: No, but the machine was very rarely used. Operation length: 7000 mm Operation width: 800 mm Profile thickness (workpiece thickness): 10 mm up to 200 mm Polishing drive: 2 x 25 kW including converter (Lenze) Power total: 65 kW Siemens PLC system & touchscreen: PLC -SIEMENS S7200 Touchscreen - SIEMENS TOUCH PANEL TP177MICRO ( 1P 6AV6 640-0CA11-0AX0)

We offer you here a used workbench frame of the manufacturer Jung Heinrich for sale. Workbench depth: 1,000 mm Technical data on the workbench frame: Manufacturer: Jung Heinrich Type: Esmena The scope of delivery includes: 02x workbench stand, used Material color: dark green or blue Stand profile: 76.2 x 74.7 mm Stand height: 900 mm Stand depth: 1,000 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( screwed half-timbering ) 02x workbench traverses, used Material color: orange Box profile: 85 x 40 mm clear width: 2,775 mm 04x locking pins, used Version: completely galvanized The images serve to illustrate the material. The material color may differ if necessary. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5  ...

Standard scope of delivery â?¢ 12 cylinder four-stroke gas engine in V-arrangement based on MAN diesel engine single-cylinder heads, high-alloy valve seat rings and valves, form-forged crankshaft with screwed counterweights, wet cylinder jacks, piston cooling over oil spray nozzles â?¢ Compression ratio 14:1, biogas 1500 rpm â?¢ Main power oil filter, 2-fold, reclining, not switchable with oil cooler â?¢ Closed crankcase ventilation with oil separator â?¢ Flywheel case SAE 1 â?¢ Flywheel I = 2.292 kgm2 for clutch SAE 11.5 and SAE 14 with tooth wreath â?¢ Anlassser â?¢ Valve solvets made of hard metal â?¢ Cam shaft with drive wheel for electric ignition equipment â?¢ Exhaust collection mammals line uncooled, isolated â?¢ Exhaust turbochargers water-cooled, ...

We offer you here a used workbench frame of the manufacturer Jung Heinrich for sale. Workbench depth: 600 mm Technical data on the workbench frame: Manufacturer: Jung Heinrich Type: Esmena The scope of delivery includes: 02x workbench stand, used Material color: dark green or blue Stand profile: 76.2 x 74.7 mm Stand height: 900 mm Stand depth: 600 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( screwed half-timbering ) 02x workbench traverses, used Material color: orange Box profile: 70 x 35 mm clear width: 1,430 mm 04x locking pins, used Version: completely galvanized The images serve to illustrate the material. The material color may differ if necessary. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 workin ...

The JMC 407 is the top seller among our alligator scissors. It is cost-effective, has a sufficient knife length and enough power for most tasks in metal recycling. It is suitable for cutting many materials, such as profiles, pipelines, motors, transmission housings. The scissors are also frequently used for cleaning scrap metals or for cutting vehicle coolers. The machine has a control without electronics and a manually adjustable holder, which also acts as a protective hood. The scissors can be used by foot pedal in single or continuous operation. The opening width is adjustment via simple clamping screws.

We offer you here a used workbench frame of the manufacturer Jung Heinrich for sale. Workbench depth: 1,000 mm Technical data on the workbench frame: Manufacturer: Jung Heinrich Type: Esmena The scope of delivery includes: 02x workbench stand, used Material color: dark green or blue Stand profile: 76.2 x 74.7 mm Stand height: 900 mm Stand depth: 1,000 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( screwed half-timbering ) 02x workbench traverses, used Material color: orange Box profile: 70 x 35 mm clear width: 1,430 mm 04x locking pins, used Version: completely galvanized The images serve to illustrate the material. The material color may differ if necessary. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5  ...

Qty. 1 Second-hand sawing machine Sawing machine Mfc.: Kaltenbach Type: HDM 1431 Built: 2005 General description of HDM 1431 Can cut all types of profiles (quite thick profiles as well) with a straight or angled cut. Generally, angles are not cut with this saw, except for large sections by positioning the V against the bottom. Technical details: Profiles: Height: 50-400 mm Width: 50-1000 mm Cut at 90° min. length: 50 mm Cut at 90° max. length: 24200 mm Cut at 55° min. length: 3900 mm Cut at 45° min. length: 2900 mm Hard blade: Dia.: 1430 mm Thickness: 9.5 mm

We offer you here a used workbench frame of the manufacturer Jung Heinrich for sale. Workbench depth: 600 mm Technical data on the workbench frame: Manufacturer: Jung Heinrich Type: Esmena The scope of delivery includes: 02x workbench stand, used Material color: dark green or blue Stand profile: 76.2 x 74.7 mm Stand height: 900 mm Stand depth: 600 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( screwed half-timbering ) 04x workbench traverses, used Material color: orange Box profile: 70 x 35 mm clear width: 1,430 mm 08x locking pins, used Version: completely galvanized The images serve to illustrate the material. The material color may differ if necessary. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 work ...

Double pneumatic table press Bosch brand Built in 1983 maximum pressure 18 kN maximum stroke: 70 mm maximum operating pressure 5 bar Two-handed actuation knob Table made of aluminium profiles Condition used

We offer you a used post protection here manufacturer BITO (PRO). The stand protectors are designed for a Frame profile width of 80 mm. Included in the scope of delivery are: 01x Post protection, used Material color: yellow f. Stand profile width: approx. 80 mm Total height: approx. 715 mm Total width: approx. 90 mm Inner width: approx. 82 mm Total depth: approx. 70 mm Height designion: approx. 40 mm Material thickness: approx. 4 mm Hole grid: approx. 50 mm Hole diameter: approx. 10 mm Weight / pcs.: approx. 4,908 Kg 04x Hexagonal screw: M10 x 40 mm 04x Hexnut: M10 04x Distance piece: f. M10 Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspection in accordance with DIN EN 15635 carried out in accordance with the Requirements of th ...

We offer you here a used workbench frame of the manufacturer Jung Heinrich for sale. Workbench depth: 1,000 mm Technical data on the workbench frame: Manufacturer: Jung Heinrich Type: Esmena The scope of delivery includes: 02x workbench stand, used Material color: dark green or blue Stand profile: 76.2 x 74.7 mm Stand height: 900 mm Stand depth: 1,000 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( screwed half-timbering ) 04x workbench traverses, used Material color: orange Box profile: 70 x 35 mm clear width: 1,430 mm 08x locking pins, used Version: completely galvanized The images serve to illustrate the material. The material color may differ if necessary. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 ...

Agitator 0.25 KW with aluminium propeller 300 mm With traverse made of aluminium profiles 45 45 mm. Used electric motor 0.25 KW, 3 x 230/400 Volt, n = 1375 rpm, Weight approx. 15 kg. With motor protection plug. Shaft: precision stainless steel shaft D14, length 500 mm, diameter 14 mm, Material stainless steel 1.4301. Rigid coupling made of stainless steel 1.4571. Stirring organ: Two-wing aluminum propeller d = 300 mm.

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant Refurbished Pharmapaktor APC L200/50. The machine was previously used as a demo and rental unit. Compacting head Two cast stainless steel H-frames connected by spacer bolts. Two laterally foldable swing arms for easy and quick changing of the rollers. The swing arms are fixed with two tie rods, which also absorb the compressive forces of the compacting rollers. One chamber insert for guiding the product flow and two center pieces for sealing the roll ...

AMOB MAH 60/3 Section: 20 cm ³ Power: 5.5 kW - 7 hp Rpm: 11 rpm Ø instrument: 170/108 mm Ø shaft: 55/55 mm Weight: 600 kg Dimensions: 1300x890x1550 mm Nr. 3 motorized rollers hydraulic adjustment top roller Side guide rollers Programmable and displayed top roller Horizontal and vertical working position Pedal with safety device start/stop General information: The AMOB MAH series top roll profile hydraulic bending machines are the backbone of the widest selection of profile curves in the world. The MAH series is perfect for those applications that require multiple passes, where repeatability is paramount. Motorized 3-roller machines are suitable for narrower spokes and minimize material marking. Both horizontal and vertical working positions ensure that, even in the smallest workspaces, a mah series profiling machine will be placed. T ...

Dynajet roof cleaner for quick and thorough roof cleaning. Net price: € 2.933,00. Ideal for cleaning concrete roof tiles and tiled roofs. Fully equipped with brush, pressure gauge, 2/2 way ball valve for high pressure on/off, wheel spacing and height adjustable to roof profile, nozzle beam for 2 identical nozzles (form D). Connection: M22 x 1.5 AG or M24 x 1.5 AG 500 mm diameter. Please order the nozzles, sealing and support rings separately (not included). Attention: 2 identical nozzles are always required. Nozzle selection: Machine type Designation Form 15° beam angle for 280me + 350th 0.95 D for 350me + 350mg + 350md 1.1 D for 500me + 500mg + 500md 1.15 D for 500th + 500me-30 1.3D 30° beam angle for 280me + 350th 0.95 D for 350me + 350mg + 350md 1.1 D for 500th + 500me-30 1.3D General technical data Maximum pressure 500 bar Connection type (input) M22x1,5 AG  ...

Capacity: up to 22kg of green coffee per roast (88kg per hour) Roasting time: 12-15 minutes Voltage: 400V, 3 phase, 60Hz (other voltages by request) Gas: natural gas/LPG Burner: Probat – direct, modulated Chaff cyclone with a wheeled bin for easy chaff disposal is included with the roaster. A green coffee loader and destoner can also be included. The roaster will undergo a major refurbishing, the process will include: - inspection, sandblasting, cleaning and repairing all of the parts, - installing new insulation, - installing new bearings, - installing a new drum cover, - installing new direct drive motors with speed control on the drum and exhaust fan, - making a new electric cabinet and controls (optional: PLC and touchscreen with automatic roasting and profiling), - installing new cooling bin sheathing, - rebuilding the burner, - building a new c ...

approx. 3000 m2 steel construction stage 2-storey Used goods, good condition, see pictures Manufacturer STOW Length approx. 58.5 m Width approx. 54.6 m Height lower edge 3.4 m Height top edge 3.7 m Load 500 kg/m2 C-Profiles and Sigma Profile Design fastened with screws and nut Grid distances adjustable in length Floor structure is 38 mm chipboard, highly compacted, groove and spring Underside white, top grey coated Negotiation price: Offer on request! Partial sale possible! Disassembled and loaded Goods are in stock. Transport costs possible on request. Visit possible at any time by appointment. More information on request. Constantly over 5000 lfm pallet racks in stock by numerous manufacturers. (changes and errors in the technical data, information prices and intermediate sale reserved! See our Terms and Conditions, all prices excl. VAT from s ...

approx. 1500 m2 steel construction stage 1-storey Used goods, good condition, see pictures Manufacturer STOW Length approx. 58.5 m Width approx. 54.6 m Height lower edge 3.4 m Height top edge 3.7 m Load 500 kg/m2 C-Profiles and Sigma Profile Design fastened with screws and nut Grid distances adjustable in length Floor structure is 38 mm chipboard, highly compacted, groove and spring Underside white, top grey coated Negotiation price: Offer on request! Partial sale possible! Disassembled and loaded Goods are in stock. Transport costs possible on request. Visit possible at any time by appointment. More information on request. Constantly over 5000 lfm pallet racks in stock by numerous manufacturers. (changes and errors in the technical data, information prices and intermediate sale reserved! See our Terms and Conditions, all prices excl. VAT from s ...

4 pcs Kragarm regalia stand, one-sided, new, built year: 2019, consisting of: - Also possible with Dacharm! - Also possible with Dacharm! Technical data: Shelf height: 3,000 mm Shelf depth: 1,360 mm Shelf length: 4,000 mm Axle distance: 3 x 1,300 mm Extension: 1,200 mm Kragarme per stand: 3 pieces (screwed) Pitch: 100 mm max. Load capacity / arm: 750 kg max. Load capacity / stand: 2.250 kg Surface: hot-dip galvanized Condition: new Material scope: Number of stands one-sided: 4 pieces / IPE 160 Number of foot profiles: 4 pieces / IPE 160 Number of Kragarms: 12 pieces / IPE 100 Number of cross bandages: 1 piece Number of spacers: 6 pieces Incl. screws, plugs and load labels Item locations / subject to availability: Germany + Austria + Switzerland Freight / Delivery: 5 - 10 business days after receipt of payment Freight costs (D): â?¬ 290.00 in ...

Qty. 1 Second-hand section rolling mill plant Mfc.: Pomini, OMV, BM, Bendotti Built: 1989 continuously modernised Stopped: 2019 Installed power: 16.2 MW Billet income sizes: 120 x 120 up to 160 x 160 mm Length: 6.0 m Section production: Round bar dia.: 30 – 60 mm Angles from 30x3 up to 100x12 mm U” channel from 40x20 and 120x55 mm T” shape from 30 till 100 mm T” shape from 30 to 120 mm (Special for elevator rails- Leader in Europa) The rolling mill can be implemented with many other profiles by using different grooved rolls. Production capacity: 250,000 – 270,000 T/annum depending on the production mix Scope of supply: Reheating furnace Section rolling mill line Tying Machine Descaler Bundle Machine Cooling tower Machine shop

4 pcs Kragarmregalstand, one-sided, new, built year: 2019, consisting of:- Also possible with Dacharm! - Also possible with Dacharm! Technical data:Shelf height: 4,200 mmShelf depth: 1,360 mmShelf length: 4,000 mmAxis distance: 3 x 1,300 mmExtension: 1,200 mmKragarms per stand: 3 pieces (screwed)Grid: 100 mmmax. Ab. Load capacity / arm: 750 kgmax. Ab. Load capacity / stand: 2.250 kgSurface: hot-dip galvanizedCondition: newMaterial circumference: number of stands one-sided: 4 pieces / IPE 160Number of foot profiles: 4 pieces / IPE 160Number of kragarms: 12 pieces / IPE 100Number of cross bandages: 1 pieceNumber of spacers: 6 PieceIncl. Screws, dowels and debit labelsArticle locations / subject to availability: Germany Austria SwitzerlandFreight / Delivery: 5 - 10 business days after receipt of paymentFreight costs (D): â?¬ 360,00 incl. VAT Austria Switzerland by arrangementNote: ...

4 pcs Kragarm regalia stand with dacharm, one-sided, new, built: 2019, consisting of: Technical data: Shelf height: 3,000 mm Shelf depth: 1,360 mm Shelf length: 4,000 mm Axle distance: 3 x 1,300 mm Extension: 1,200 mm Dacharme: 1,500 mm, 5° rising or falling Kragarme per stand: 3 pieces (screwed) Pitch: 100 mm max. Load capacity / arm: 750 kg max. Load capacity / stand: 2.250 kg Surface: hot-dip galvanized Condition: new Material scope: Number of stands one-sided: 4 pieces / IPE 160 Number of foot profiles: 4 pieces / IPE 160 Number of dacharme: 4 pieces / IPE 100 (with three tabs) Number of Kragarms: 12 pieces / IPE 100 Number of diagonal dressings: 2 pieces Number of spacers: 6 pieces Incl. screws, plugs and load labels We are happy to check for them whether this shelf is designed for their wind and snow loads! Item locations / subject to availabil ...

4 pcs Kragarm regalia stand with dacharm, one-sided, new, built: 2019, consisting of: Technical data: Shelf height: 4,200 mm Shelf depth: 1,360 mm Shelf length: 4,000 mm Axle distance: 3 x 1,300 mm Extension: 1,200 mm Dacharme: 1,500 mm, 5° rising or falling Kragarme per stand: 3 pieces (screwed) Pitch: 100 mm max. Load capacity / arm: 750 kg max. Load capacity / stand: 2.250 kg Surface: hot-dip galvanized Condition: new Material scope: Number of stands one-sided: 4 pieces / IPE 160 Number of foot profiles: 4 pieces / IPE 160 Number of dacharme: 4 pieces / IPE 100 (with three tabs) Number of Kragarms: 12 pieces / IPE 100 Number of diagonal dressings: 2 pieces Number of spacers: 6 pieces Incl. screws, plugs and load labels We are happy to check for them whether this shelf is designed for their wind and snow loads! Item locations / subject to availabil ...

4 pcs Kragarm regalia stand, one-sided, new, built year: 2019, consisting of: - Also possible with Dacharm! - Also possible with Dacharm! Technical data: Technical data: Shelf height: 5,200 mm Shelf depth: 1,360 mm Shelf length: 4,000 mm Axle distance: 3 x 1,300 mm Extension: 1,200 mm Kragarme per stand: 3 pieces (screwed) Pitch: 100 mm max. Load capacity / arm: 750 kg max. Load capacity / stand: 2.250 kg Surface: hot-dip galvanized Condition: new Material scope: Number of stands one-sided: 4 pieces / IPE 180 Number of foot profiles: 4 pieces / IPE 180 Number of Kragarms: 12 pieces / IPE 100 Number of cross bandages: 1 piece Number of spacers: 6 pieces Incl. screws, plugs and load labels Item locations / subject to availability: Germany + Austria + Switzerland Freight / Delivery: 5 - 10 business days after receipt of payment Freight costs (D): &aci ...

1 pc flame pretreatment system with electronic control 1 pc EF 600-1 Burner control consisting of Electrical control with ignition and monitoring device for 1 pc burner, control electronics, control panel with plain text display, Emergency stop setup and interface for external control Mechanical control with Safety valves, gas/air mixers, thermoanemometrial mass flow meters for air and gas, Engine valves, pressure monitors for overpressure and vacuum monitoring and supply air blowers. 1 pcs C24-2300 Film burner, 2200 mm working width, adjustable up to min. 1000 mm with connections for water cooling and water-cooled double T-beam 1 pc spare parts consisting of 2 earth replacement electrodes and 1 replacement fabric Power supply : 400/230 V 50 Hz, 2.5 kVA Gas supply : Natural gas 75 – 100 mbar Heat output : max. 400 kW Gas consumpt ...

4 pcs Kragarm regalia stand, one-sided, new, built year: 2019, consisting of: Technical data: Shelf height: 2,150 mm Shelf depth: 640 mm Shelf length: 4,000 mm Axle distance: 3 x 1,300 mm Extension: 500 mm Kragarme per stand: 3 pieces (screwed) Pitch: 100 mm max. Load capacity / arm: 1,000 kg max. Load capacity / stand: 3,000 kg Surface: hot-dip galvanized Condition: new Material scope: Number of stands one-sided: 4 pieces / IPE 140 Number of foot profiles: 4 pieces / IPE 140 Number of Kragarms: 12 pieces / IPE 80 Number of cross bandages: 1 piece Number of spacers: 6 pieces Incl. screws, plugs and load labels Item locations / subject to availability: Germany + Austria + Switzerland Freight / Delivery: 5 - 10 business days after receipt of payment Freight costs (D): â?¬ 240.00 inc VAT Austria + Switzerland by arrangement Note: Intermediate ...

4 pcs Kragarm regalia stand with dacharm, one-sided, new, built: 2019, consisting of: Technical data: Shelf height: 5,200 mm Shelf depth: 1,360 mm Shelf length: 4,000 mm Axle distance: 3 x 1,300 mm Extension: 1,200 mm Dacharme: 1,500 mm, 5° rising or falling Kragarme per stand: 3 pieces (screwed) Pitch: 100 mm max. Load capacity / arm: 850 kg max. Load capacity / stand: 2,600 kg Surface: hot-dip galvanized Condition: new Material scope: Number of stands one-sided: 4 pieces / IPE 180 Number of foot profiles: 4 pieces / IPE 180 Number of dacharme: 4 pieces / IPE 100 (with three tabs) Number of Kragarms: 12 pieces / IPE 100 Number of diagonal dressings: 2 pieces Number of spacers: 6 pieces Incl. screws, plugs and load labels We are happy to check for them whether this shelf is designed for their wind and snow loads! Item locations / subject to availabil ...

4 pcs Kragarm regalia stand, on both sides, new, built in 2019, consisting of: Technical data: Shelf height: 2,600 mm Shelf depth: 2,160 mm Shelf length: 4,000 mm Axle distance: 3 x 1,300 mm Extension: 1,000 mm Kragarme per stand: 6 (3/3) pieces (screwed) Pitch: 100 mm max. Load capacity / arm: 600 kg max. Load capacity / stand per side: 1,800 kg Surface: hot-dip galvanized Condition: new Material scope: Number of stands, on both sides: 4 pieces / IPE 160 Number of foot profiles, on both sides: 4 pieces / IPE 160 Number of Kragarms: 24 pieces / IPE 80 Number of diagonal dressings: 2 pieces Number of spacers: 6 pieces Incl. screws, plugs and load labels - Also possible with Dacharm! - Also possible with Dacharm! Item locations / subject to availability: Germany + Austria Freight / Delivery: 5 - 10 business days after receipt of payment Freight cost ...

4 pcs Kragarm regalia stand, one-sided, new, built year: 2019, consisting of: Technical data: Shelf height: 2,600 mm Shelf depth: 1,160 mm Shelf length: 4,000 mm Axle distance: 3 x 1,300 mm Extension: 1,000 mm Kragarme per stand: 3 pieces (screwed) Pitch: 100 mm max. Load capacity / arm: 600 kg max. Load capacity / stand: 1,800 kg Surface: hot-dip galvanized Condition: new Material scope: Number of stands one-sided: 4 pieces / IPE 140 Number of foot profiles: 4 pieces / IPE 160 Number of Kragarms: 12 pieces / IPE 80 Number of cross bandages: 1 piece Number of spacers: 6 pieces Incl. screws, plugs and load labels Item locations / subject to availability: Germany + Austria + Switzerland Freight / Delivery: 5 - 10 business days after receipt of payment Freight costs (D): â?¬ 290.00 inc VAT Austria + Switzerland by arrangement Note: Intermedia ...

2019 technically overhauled and repainted. - Grinding range of 20 to 400 mm with grinding wheel of 200 mm - up to 450 mm with smaller grinding wheel - Zaehne numbers 20 to 999 - Tooth ahehes 0 to 20 mm - Grinding wheel diameter max. 200 mm - Stroke numbers 40 to 180 - Weight approx. 990 kg - Automatic grinding wheel delivery via electronic preselection; max. removal 4 mm. - Removal sequence according to zaehne number preselection in 0.02 mm increments - Automatic grinding wheels profiling device with automatic. Compensation of removal. - Cycle can be pre-predictable according to zaehne number. - Leaf stuetze - Central lubrication - Accessories - Operating instructions and operator tool

Model: Gothot 90, Type: JRHH5ARGA Year: 1958 Capacity: 90kg of green coffee per roast (360kg per hour) Roasting time: 12-15 minutes Voltage: 400V, 3 phase (other voltages by request) Gas: natural gas/LPG Burner: Gothot - indirect Pneumatic green coffee loader, destoner and cyclone included The roaster will be fully refurbished including: - inspection, sandblasting, cleaning and repairing all of the parts, - installing new insulation, - installing new bearings, - installing new direct drive motors with speed control on the destoner, drum and exhaust fan, - installing new pneumatics, - making a new electric cabinet and controls (optional: PLC and touchscreen with automatic roasting and profiling), - installing new cooling bin sheathing, - repairing the burner (optional: new burner) - new paint - thermal paint on the parts that are exposed to high temperatures and powd ...

We offer you a used shelf connector from the manufacturer BITO for sale. Specifications for the shelf connector: Manufacturer: BITO Type: P3S/ PL38/ PRO Included in the scope of delivery are: 01x Shelf connector used Material color: sendzimir galvanized Shelf spacing: approx. 200 mm L- profile: approx. 50 x 50 mm Weight/pc.: approx. 0.3 kg /pc. 02x Hexagonal screw, M10 x 40 mm 8.8. 02x Hexnut nut, M10 02x Washers, M10

We offer you here a new Pallet rack traverse for purchase. Due to the hot-dip galvanized surface, these are Traverses suitable for outdoor use. Technical data for the pallet rack traverse: Shelving system: Lücht & Palm Type: MB Included in delivery are: 01x pallet rack traverse,new Material color: hot-dip galvanized IPE profile: 120 x 60 mm Execution: Head traverse Agraffe: 2 HK (hooks) Clear width: 1,800 mm load per pair of trusses 3,600 kg, at the same time. distributed load 1x set HV set EN14399-4 - EN14399-6 10.9 Hexagonal screw with nut and discs for HV connection Material color: hot-dip galvanized In the case of these trusses, an edification for the Storage of shelf gratings welded on. (Height: 40 mm / Material thickness: 4 mm)

We offer you a used shelf connector from the manufacturer Jung Heinrich for sale. Specifications for the shelf connector: Manufacturer: Jung Heinrich Type: Esmena for stand profile width: 76.2 mm Included in the scope of delivery are: 01x Shelf connector used Material color: green Shelf spacing: approx. 245 mm Profile: approx. 80 x 40 mm Weight/pc.: approx. 0.98 kg /pc. 04x Hexagonal screws, M8 x 20 04x Hexnut nut, M8 04x Washers, M8