profil used for sale

pressure:150 t total power requirement:20 kW weight of the machine ca.:11,5 t dimensions of the machine ca.:8800 x 1800 x 2200 mm Pressure adjustment via rotary control infinitely adjustable:15-150 t Cylinder diameter:100 mm Press speed (infinitely variable via joystick):0-9,9 mm/s servo motor:2 kW Cooling unit:1 kW Oil tank (under table):350 l Oil cooling (electric):1 kW (max)

BALLISTRINE- linear profiler,/shaper-double sided 10 hp cutter head per side- follows your templates - shapes both sides- 9' table- hydraulic feed- material hold downs- $7,800

Pass-through width mm: 150 Pass-through height mm: 40-120 Workpiece length min mm: 450 Configuration: Position 1 - Vertical swivel brush unit L (Manual) Position 2 - Vertical swivel brush unit R (Manual) Position 3 - Lower grinding plates (motorized) Position 4 - Lower grinding plates (motorized) Position 5 - Lower grinding plates (motorized) Position 6 - Lower Horizontal Brush Unit (Manual) Total connection KW: 15 Weight Kg: 2000 With roller conveyor and conveyor belt

4 Belt grinding unit 2 grinding brushes Carpet length mm: 5500 Carpet width mm: 400 (extendable) Weight Kg: 800

Overhaul year 2020 Built 1995-2019 Saw blade 160 - 200 mm Drive power saw motor 2.2 KW Speed Saw blade 1,500 -3,750 min-1 Cutting speed Saw blade 750 - 3350 m/min Saw height control infinitely adjustable fully electronic Working area square 90° max.: 50 x 50 mm Working range flat 90° max.: 110 x 50 mm Working area Around 90° max.: 50 mm Supply length Pneumatics 2.5 - 350 (single stroke) 5 - 700 (double stroke) Supply length AC Servo 2.5-9999 mm (optional) Supply supply. Servo-controlled replenishment unit 500 mm/s Compressed air connection 6 bar Weight (saw) approx.: 600 Kg Dimensions LxWxH (saw without attachments)approx.: 1400mm x1000mm x1600mm Technical Description Pressta Eisele Profilma 200 Retrofit Pressta Eisele Profilma 200 Retrofit Fully automatic high-performance sawing machine for non-ferrous metals and material The machine is technically as well as ...

Metal saw band bi alfa cobalt profile 3100x27x0.9 Toothing: 4/6 Length: 3100 mm Chip angle: 0°

Sheet metal profiling line was built in 2017. Equipment: – profiling machine – guillotine – control system – hydraulic press with an aggregate

Equipment: - Quick-change Quickmelt gluing part for hot melt adhesive. - Automatic edge magazine with roll plate and autom. Edge feeder - extended inlet ruler, adjustable - heavy pressure zone (with pgroamm adjustment) with a driven main pressure roller, as well as 3 repressure rollers - Motor-adjustable upper pressure. - Control panel on the machine inlet. - Electronic control PC 16 - Modem for remote service and remote maintenance - Noise protection cladding - autom. Chain track central lubrication - Interface for return (electronic) DAHR01/02/15 Aggregate assembly - Release agent specification workpiece - Joining milling unit 2 x 2.2 kW - Cross-cut unit 2 x 0.35 kW, pneum. Adjustment chamfer/straight - Milling unit 0-25 degrees, 2 x 0.55 kW counter-rotation, to flush milling machine, pneum adjustable pneum. 2-point adjustment Vertical probe rollers - Milling unit ...

Vibrator PROFILINE RLA-H.7S, max. format 1220 x 1640 mm with spread roller and pneumatic push-out to the rear, Auto. Rear table assembly with plier transport system AM 1220x1640 mm High-speed cutter SCHNEIDER SENATOR 185 SC-Video Cutting width max. 1850 mm Stacker ABS 145-7B , max. format: 1220 x 1640, max. stack height 1450 mm Footprint approx. 8 x 8 m

Equipment: - Quickmelt gluing part for hot melt adhesive - Automatic edge magazine for rolls and fixed lengths - Heavy pressure zone with driven, pneumatically applied main pressure roller and 2 free-running repressure rollers. (adjustable by program) - motor-adjustable upper pressure. - Control panel on the machine inlet. - Electronic control power control PC 20+ - Feed variable 8-14 m/min - PU overpressure rollers - Inlet ruler adjustable by program - Joining milling unit 2 x 2.2 kW - Bevel cross-cut unit/straight 2 x 0.18 kW - Milling unit 2x0.55 kW (adjustable by program) with multiple roller pressing - Mould milling unit top+bottom, 2 x 0.35 kW - Drawing blade with quick-change heads and additional device for pointed workpieces - Glue joint drawing blade - Schwabbelaggregat - Automation package for 1-milling machines, consisting of: 3175 - Pneumatic Adjustment Caps ...

width of the strips: 100 mm band length: 2000 mm band speed: 15/30 m/sec tube diameter: 20 - 76 mm angle adjustable from - to: 30 - 90 Grad connected load frequency: 400 V total power requirement: 2,5 /3,3 kW weight of the machine ca.: 0,19 t dimensions of the machine ca.: 1,2 x 0,75 x 0,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hint: No screw material included. Technical data on the restock straps: Manufacturer: Jung Heinrich Type: MPB The scope of delivery includes: 02x Top-up tabs, used total height: approx. 320 mm overall width: approx. 110 mm Inner width: approx. 102 mm f. Frame profile width: approx. 100 mm Depth: approx. 50 mm Material thickness: approx. 4.00 mm Hole spacing i. d. depth: approx. 50 mm Perforated grid i. d. width x height: approx. 60 x 50 mm Drill holeØ: approx. 10 mm Material color: blue Weight | pcs.: approx. 1,860 kg Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.

AGEING OVEN FOR ALUMINUM EXTRUSIONS The aging furnaces are used in the aluminium profile industry for the elimination of internal stresses of aluminum materials after extrusion and for hardening them. The ovens are custom designed as batch type with high speed ventilation and high efficiency in order to achieve needed hardness demand on the aluminum work pieces. Motion of the batches is done by a ground trolley or a ground conveyor system. The oven door could be an automatic guillotine type or manual hinged door. The whole process is PLC controlled, data logging option is an advantage during the operation. Electricity, liquid or gas fuel is used for heating the ovens. The ageing ovens are CE certificated and conforms to the European Norms.

12 inch, up to 3mm pull feature. It produces products in accordance with the dimensions that Afad wants. It is actively used. We have a sale plan for project change.

Equipment: - Machine stand throughout - Fixed stop side right - Paint finish Grey RDS 240 80 05 - Inlet ruler motorically adjustable, extended by 300 mm - Inlet lock pneumatically controlled - automatic edge feeder - Upper pressure: belt upper pressure - Height adjustment motorized - Position display and input centrally via the controller - Transport chain with rubber support, 80 mm wide - automatic central lubrication for the transport chain - Workpiece support in scissor design, approx. 1000 mm extendable - Noise protection equipment - Hood interior lighting 3 lamps - Control Power Control PC20+ Aggregate technology: - Joining milling unit 2 x 2.2 kW 200 Hz (60 mm joining milling cutter set) - Gluing unit A15 (workpiece preheating, QA34 application unit, infrared adhesive activation, magazine for rolls and fixed lengths, pressure zone with motorized adjustment, driv ...

Description conveyor profiles power engine kw 0,18 length mm 3100 width mm 70 regolabile

Description Profile unloader adjustable inclination adjustable height adjustable belt speed

Suitable for coating plastic profiles, includes flaming, hoover, humidifier, cooling unit, vacuum pumps, double diaphragm pump, pulsation damper, pull-rope emergency switch, reflection light barrier, filter control valve and other elements, with documentation.

-Bakery baked goods freezer cabinet -Bakery freezer Profi-Line ventilated -Manufacturer : Liebherr -Model: BGPv 8470 Index 41A / 001 -for 60x80cm sheets and also 60x40cm -Class: T (5) -Gross capacity: 856 liters -Refrigerant: R290 -4.0 A 220-240 V 50Hz -External dimensions approx.: 80x94x218cm WxDxH

Brand: MARTIN Type: T90 with 7 spindles Feed table: 2000 mm Table height adjustment: Max. Spahnabname 10 mm Stop bar: Manual adjustment 10 mm Planer width: 22 - 240 mm (260 possible with ingekammerte planing heads) Planer thickness: 5 - 170 mm 1. Planer shaft dresser: Spahn removal max. 10 mm, clamping length 240 mm, flight circle min. ø100 mm - max ø125 mm, Z-4, 6.000rpm, 7.5 KW 2&3. Spindle: Vertical callibrier planing and contour shafts, Spahn removal max. 10 mm, clamping length 160 mm, flight circle min. ø100 max ø125 mm, Z-4, 6.000 rpm, 7.5 KW 4. Thickness shaft/upper shaft: horizontal spindle tap removal: max. 8.5 mm, clamping length 240 mm, flight circle min. ø100 mm - max ø125 mm, Z-4, 6.000rpm, 7.5 KW 5. Top spindle 2nd profile shaft horizontal, Spahn removal: max. 8.5 mm, clamping length 240 mm, flight circle min. ø100 - max ø180 mm, 6.000 rpm, 7.5 KW, adju ...

Single sided edge bander with hot melt, fixed side at the right, pre-milling unit Edge thickness: 0,4 to 12 mm Workpiece thickness: 8 - 60 mm Feedspeed 8-20 m/min (limited to 10 m/min using the contour trimming) Workpiece transport by chain, top pressures with rubber rollers Sound enclosure over all trimming motors Equipment: Adjustable fence Pre-milling with 2 shapers, each 2,2 kW Coil and strip magazine Hot melt unit, Quickmelt type Pressure zone with1 driven and 2 non-driven pneum. Loaded rollers End trims, 2 x 0,35 kW motors, straight and chamfer 15? Top/bottom trimming, motors 2 x 0,35 kW Radius trimmming Contour trimming unit, leading and following edge, 2 x 0,35 kW Radius scraping unit Glue scrapers Buffing unit Controlls PC 20+

SBZ 630/11/R machining center from Elumatec in mint condition. The machine has only been put into operation by Elumatec, otherwise never used. Original price € 636,000.00 net ex works Elumatec. For more information, please call us. The price is from stock Baku excluding transport costs and dismantling. It can also be done on request including delivery to DE.

Manufacturer: Brandt KDF mit Fügefräsen, Type: Profiline KDF 670, Year: 2005, Barcode: 0,5-3, Min-max edge material mm: 120-3500, Work piece width min-max mm: 10-55, Min.-max. workpiece length in mm: 10-60, Edgeband height max mm: 20, Luftkissentische Einlauf: Umstellung von 2mm auf Fase automatisch, mit Vakuum: yes, mit Klemmung: yes, Machining cracks: yes, Fine milling: yes, Application of separation agent: yes, PU-EVA: yes, Laser technology: yes, kW Leistung Laser: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Bevel milling: yes, with tool holders: yes, Nut Motore: yes, Type of scraper: yes, Number of tools per tool-magazine: yes, Number of sanding units: yes, Buffing unit: yes, Top pressure belt/roller: yes, Workpiece support: yes, Workpiece return: Rolle, Return type: yes, System dismantled: ca. 6700, FREE TEXT: ZHR 01, : ink Rückführung/ Verfügbarkeit ca. ab Jul ...

Manufacturer: Weeke, Type: BHC 600 Profiline, Year: 2003, Control: Weeke, Working range X: 9.000, Working range Y-axis: 1.790, Working range Z: 370, C axis: yes, Work piece width min-max mm: 1.300, Min.-max. workpiece length in mm: 7.250, Min.-max. workpiece height in mm: 100, Feeding speed max m/min: 80, Pendulum processing: yes, Number of milling spindles vertical: 1, Tool adaption system: HSK 63, Milling engine 1 hours power: 12, Number of tool changers: 2, Tellerwechseler: 2, Number of tools per tool-magazine: 8 + 18, Mitfahrender Werkzeugwechsler: yes, Vertical drills-X: 10, Drill vertical Y: 10, Horizontal drills-X: 3, Drill horizontal Y: 3, Number of tables: 2, Traverse table: yes, 2 station allocation: yes, Saw unit: yes, Laser positioning: yes, Year :2003

Manufacturer: Kragarmregal, Type: Profillagerregal, Regalart: Einseitig, Regallänge mm: 5000, Anzahl Ständer: 6, Lagerebenen: 4, 1stupright frame pieces Qty.: 6, 1stheight mm depth mm: 2500, 1.Transverse beam length mm: 1 X 900,

Manufacturer: Kragarmregal, Type: Profillagerregal, Regalart: Einseitig, Regallänge mm: 5000, Anzahl Ständer: 6, Lagerebenen: 4, 1stupright frame pieces Qty.: 6, 1stheight mm depth mm: 2500, 1.Transverse beam length mm: 18 X 900,

Manufacturer: Kragarmregal, Type: Profillagerregal, Regalart: Doppelseitig, Regallänge mm: 5000, Anzahl Ständer: 6, Lagerebenen: 4, 1stupright frame pieces Qty.: 6, 1stheight mm depth mm: 2500, 1.Transverse beam length mm: 2 X 900,

Manufacturer: Bütfering, Type: Profiline SCR/RRR, Year: 2007, Sanding width mm: 1350, Sanding hight mm: 3-160, Number of sanding belts: 3, Sanding belt dimensions: 13702620, Rollers: 3, Rubber roller: 1, Steel roller: 2, Shore roller 1: 70 , Bürstenaggregate: 1, Band 1 Leistung kW : 37, Band 2 Leistung kW : 30 , Band 3 Leistung kW : 22, Continous adjustable feeding speed m/min: 4-20, Transportbandantrieb kW: 7, Constant table hight: yes, Vacuum table: yes, Weight in kg: ca. 2020, Year :2007

Manufacturer: Reckmann, Type: Profilschleifmaschine, Year: ca.1979, Control: hand, Work piece width min-max mm: 100-300, Min.-max. workpiece height in mm: 10-60, Work piece length min-max mm: 150, Schleifaggregate rechts : 3 X Doppelkopf<CRLF>schwinschlifer, Profile sanding units: 3, Unit 1 tiltable: yes, Unit 2 slewable: yes, Unit 3 slewable: yes, Sanding belt speeds m/min: shcwingung eistellbar, Shoes electr. controlled: yes, Constant table hight: yes, Machine length: ca.4500, Year :ca.1979

Manufacturer: Heesemann, Type: Profilklotzeinschleifgerät PWST, Bauyeshr : 1994, Control: hand, Sanding belt hight: 80, Tischlänge mm : 800, Work piece hight min - max mm: 80, Control panel on top: yes, radius sanding device: yes, Profilwerkzeug-Formschleifmaschine PWS-T <CRLF>für das massgenaue Schleifen der Konturen vorgearbeiteter<CRLF>Profilwerkzeuge, bestehend aus<CRLF>über Getriebemotor oszillierend,<CRLF>Profilwerkzeuge auf Kreissegment schwenkbar gelagert.<CRLF>, Year :1994

Saw blade projection 95 mm Cutting size 4300x2200 mm Lift table width 2200 mm Options: with lifter and power concept

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 2 pieces -Profile diameter: 65/49 mm -Price: complete -Dimensions: 405/135/H200 mm -Weight: 45.2 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 2 pieces -Profile diameter: 65/49 mm -Recording: dimensions see photos -Price: complete -Dimensions: 195/400/H220 mm -Weight: 42.7 kg

Die holder, notching tool, punching tool, punch, punching die, punching punch, -Long hole punching tool: 10.5 x 23.5 mm -Stamping dimension: see photo with dimensions -Socket: Ø 30 mm -Dimensions: 230/200/H230 mm -Weight: 18 kg

MURAT - NR 241 - cutting, milling and screwing of reinforcement steel MURAT - KD 658/20 - 4 head welding machine MURAT - CN 770/20 - corner clean machine Capacity Min. 100 windows / 8 hours, Max. 120 windows / 8 hours All these machines make automatic production line for PVC systems. The price includes these three machines above and transporter of the frames between welding and corner cleaning. MURAT - NR 241 - Details: All sawing, routing, drilling, reinforcement steel screwing, marking and end milling operations on PVC profiles are gathered in one machine controlled by computer. Stacking of 10 profiles (max. 6,5 m length). Manual barcode labeling system integrated with single-lines. Servo controlled automatic swing of the saw to all angles between 30° and 150° with 0.1° accuracy. Drain slot routing, drilling and routing at variable angles. Automatic scr ...

Product number: 2876 Type: Profile Serial number: C024543627 Year of construction: 2020 Passage: 350 x 90 mm Belt width: 330 mm Compressed air: 6 - 8 Bar Power: 230VAC, 50Hz, 1Ph Dimensions: 2850 x 1350 x 1650 mm With pneumatic reject bin

General SKUR1412 LocationBarneveld MakeFrewitt TypeProFi-Dos, ProFi-Sword No.5921810811 Main Features MaterialStainless steel Motor0.37 KW Inlet diameter260 mm Specified Features - Metering screw MaterialStainless steel 1.4404, Stainless steel 1.4435 (316L) Metering screws With hoppercheck Capacity120 Ltr. Hopper sizesdia. 600x800 mm Inletdia. 260 mm Outletdia. 300 mm With breaking/mixing shaft16 rpm Motor0,37 kW 230 Volt Information Year of construction2007 Floorspace0,9x1 m CEcheck Weight250 kg Extra SpecificationsSurface quality: Ra≤0.8 μm The ProFi-Sword module is a discharge system which fluidzes powder, providing good flow behavior and preventing bridge formation. : Metering screwsFrewitt FribourgDosing units > Metering screwsBrand > Frewitt Fribourg What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to ne ...

Description: Electronic Spindle Moulder Serial Number 61.02.003.16 Table 2300 x 450 mm Fixed Speeds: 3500 / 4500 / 6000 / 8000 / 10000 r.p.m Axle Speed 15000 r.p.m. Interchangeable axle serial number: 61.02.003.16, Approx. Onsite Dimension. (l x w x h): 2,300 x 2,700 x 1,700 mm, weight approx.: 750 kg

Description: Very well maintained and powerful panel saw with:  , label printer integrated in pressure beam motorical stroke of scoring saw machine table completely equipped with air cushion dynamic package saw saw carriage and pressure beam option for thin panels with combi-profile rails , option for grooving panel thickness min/ max. 0,8/60 mm 4 pneumatical trimming fences at ,75 / 475 / 1075 / 2625 mm lifting element for full packages postfroming aggregate label printer Pica II data transfer to storage systems with CE certificate. For further technical details please see pdf -files Read off operating hours: 2,698 h, main motor: 11 kW, serial number: 0-240-82-5052, cutting length: 4,300 mm, saw blade protection: 80 mm, collets: 6 pieces, main saw blade: 350x4.4x60 mm, scoring saw blade: 180x4.4-5.4x45 mm, saw carriage speed forward: 1-130 m/min, saw carriage s ...

Description: Dimensions and weight: 7.6 x 1.4 x 2.3 m 5800 kg 9.2 x 1.0 x 1.4 m 4000 kg 2.8 x 0.8 x 1.6 m 500 kg 2.1 x 0.9 x 2.4 m 300 kg . = 12 loading meters, truck can be fully covered and with continuous loading space !  , 2. truck: Dimensions and weight: 6.6 x 2.85 x 2.2 m 3500 kg = 7 loading meters, over width 2.85 m, truck can be fully unloaded and full length Load space ! serial number: 0-240-10-1280, cutting length: 4,300 mm, cutting depth: 2,200 mm, saw blade protection: 125 mm, program fence speed reverse: 80 m/min, software: CADmatic 4.0, Approx. Onsite Dimension. (l x w x h): 20,500 x 2,850 x 2,300 mm, weight approx.: 14.100 kg

Description: Max. machinable height 120 mm Maximum machinable width 230 mm Max. forward feed speed 12 m/min Min. machinable height 6 mm Maximum machinable height 120 mm Min. machinable length 370 mm Min. machinable width 25 mm Maximum machinable width 230 mm Max. forward feed speed 12 m/min Forward feed wheels yes No. rubberised wheels 1 No. toothed wheels 4 total number of wheels 5 Operator units 4: OPERATOR UNITS 1 Cutting shaft : bottom shaft diameter : 40 mm shaft length : 240 mm Motor power : 4 KW OPERATOR UNITS 2 Cutting shaft : Right shaft diameter : 40 mm shaft length : 240 mm Motor power : 4 KW OPERATOR UNITS 3 Cutting shaft : left shaft diameter : 40 mm shaft length : 240 mm Motor power : 4 KW OPERATOR UNITS 4 Cutting shaft : top shaft diameter : 40 mm shaft length : 240 mm Motor power : 4 KW Control system Siemens Simatic Panel Touch Safety standa ...

Manufacturer: Homag Postforming, Type: VFR10/22, Year: 1997, Control: Homatic/NC 16, Software: Homag, Finished product: Türzargen/Verkleidungen, Indirekt Postforming: yes, Work piece width min-max mm: 60-1000, Min.-max. workpiece length in mm: 800-2500, Min.-max. workpiece height in mm: 16-28, Workpiece protrusion mm: 55-30, Profilarten : L-Profil/U-Profil, Postformig Fräsaggregate Stück/kW: 2 X 1 kw, Universalfräsaggregat Stück/kW: 2 X 4 kw, Leimauftrag für Profile mm: U-105, Düsensystem: yes, Furnierbefeuchtung: yes, Heiz und Ablüftstation: yes, Profildruckstrecke: yes, Fräsaggregat : yes, Fräsaggregat U-Profil/Nuten: yes, Year :1997

Posiadane oprzyrządowanie: 1. Profil płasko - owalny 90 x 55 x 2,6 - standard + zmienny - promień wewnętrzny 145 mm (łatwy sposób gięcia) 2. Profil płasko - owalny 60 x 30 x 2- standard + zmienny - promień wewnętrzny 135 mm (gięcie łatwy sposób) 3. Rura 60,3 x 2,9 - standard + zmienny - promień wewnętrzny 150 4. Rura 76,1 x 2,8 - tylko standard - promień wewnętrzny 152 W sumie posiadamy 7 kompletów matryc do gięcia i walcowania rur i profili. Charakterystyka: 5 osi sterowanych elektrycznie: Y= Gięcie X=Przesuw Z=Rotacja B1=Przesuw boczny zacisku B2=Przesuw boczny pilota Y Max. szybkość gięcia 0/1” – 150 Y Tolerancja +/- 0 – 0,1 X Max. szybkość posuwu mm 1” – 1.000 X Tolerancja +/- mm – 0,1 Z Max. szybkość rotacji 0/1”- 450 Z Tolerancja +/- 0 – 0,1 Max. średnica rury - 90X4 mm Max. średnica rury dla promienia zmien ...

ULTRASONIC INSPECTION - TESTQMATIC - TYPE: SPA-2N, L=5-60 M, 1 M/SEC., 1988 EDDY CURRENT INSPECTION - MPA - 1989 RAIL PROFIL MEASURING DEVICE - SCHMITZ & SÖHNE AND BSB - 1989 PRODUCT HEIGHT: 95-165 MM, HARDWARE & SOFTWARE

Extruder KE 90 x 30-D for manufacturing of von TPE foam and compact profiles screw diameter: 90 mm L/D ratio 30:1 (2700mm) extruder with 11 temperature-controlled zones (electrically heated by fluids) Siemens electric drive, motor 45kW at 2500rpm year of construction 1996, machine in very good condition (preliminary used in test operations) melt application device (gear pump) double profil head (also used for extrusion-coaded framework belts) electric equipment partially available extruder mounted on movable baseplate

Technische Daten: - automatischer Arbeitsablauf - programmierbares Zähne Zählwerk mit automatischer Abschaltung - Länge des Sägebandes 3 bis 5m - Zahnhöhe: Dreieckzahn 4-12 mm Wood-Mizer Profil 7-20 mm Gebrochener Zahn 4- 7 mm - Zahnabstand 5-30 mm - Zahnprofile - Vorschubgeschwindigkeit 40 Zähne/min auf Sonderwunsch 60 Zähne/min - Motor Schleifscheibe 0,18 KW 400 V / 2800 U/min - Motor Vorschub 0,15 KW 380 V / 900 U/min - Schleifscheibe außen FI 150 mm x 8 mm innen FI 13 mm oder 20mm - Maße (LxBxH) 0,70 x 1,0 x 1,30 m - Gewicht 115 kg

wire diameter range: 2,0 - 6,0 mm cutting length: up to 500 mm suitable for Round- Profil- and Flatwire; ready for operation

für Türblatt und Blendrahmen Abmessungen 179 x 112 x 40 mm Für Holzstärken von 50 - 80 mm Ausführung: Werkzeugkörper aus Stahl, bestückt mit HW-Wendeplatten, HW-Kantenrunder und HW-Nutmessern. Rückschlagarm, spandickenbegrenzt, vorzugsweise für Handvorschubarbeiten. Grundgarnitur = 3-tlg. mit Wischenringen, auf Schraubbüchse 50/40 oder 50/30 Anwendung: Zur Herstellung von variablen Doppelfälzen bei Fenster- und Türenelementen. Durch Umlegen von Zwischenringen und Einsatz mit oder ohne HW-Nutmesser kann mit dem selben Werkzeug das Profil für den Blendrahmen und für das Türblatthergestellt werden.