products line used for sale

Afag Control Unit IRG 1-S Manufacturer: Afag Type: IRG 1-S Technical Data: Degree of protection: IP54 Input voltage: 230 V Output voltage: 20–228 V (adjustable) Frequency: 50/60 Hz Rated current: 6 A Degree of protection: IP54 Function: Power and frequency controller for Afag vibratory conveyors (linear oscillator or spiral conveyor) Auction-ID: A7-49816-17

- Forming and pressing line for the production of 3-layer chipboards. - Maximum net dimensions of board 29355 x 2500 mm. - Net thickness of the boards from 4 mm to 40 mm. - Approximate board density 700 kg/m³ (for 16 mm thick board). - Production capacity: 29.40 m³/hour (for 29355 x 2500 x 16 mm boards). - Includes: • Queue preparation and management system. • 2 particle gluers for the different mixtures. • SCHENK forming system: year of manufacture 1988 (updated in 2001), with 3 forming stations (for the top, bottom and infill layers), length 28000 mm. • DIEEFFENBACHER continuous pre-press with cut-off station: year of manufacture 1989 (updated in 2001), maximum pre-pressing speed 350 mm/sec, length 28000 mm. • Acceleration conveyor belt: length 35000 mm. • DIEEFFENBACHER HPOG 80/26.200/35 continuous 2-plate hydraulic press: year of manufacture ...

- Shredding line for the treatment of recycled wood, pallets and industrial waste. - Includes: • Feed hopper with metal chain conveyor for material loading. • CASSEL metal removal system. • HAMMEL NZ-S 1000 D shredder: motor power 250 KW-1485 rpm, rotor diameter 1000 mm, rotor length 1500 mm, 72 knives, control panel. • Conveyor belts marked with a red X in photo number 3 are not included. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-49881-1

- Sanding width 2600 mm. - Variable feed speed. - It consists of: • Automatic charging station. • STEINEMANN sander for board calibration with sanding rollers. • STEINEMANN sander for finishing with sanding pads. • STEINEMANN dust filter system. • CASSEL digital metal detector. • Slitting station. • Automatic unloading station with 3-position gantry stacker. The roller tables on which the boards are unloaded are NOT included. • Intermediate conveyors. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-49881-19

Sorting and feeding system Sortimat Manufacturer: Sortimat Technology GmbH & Co. Year of construction: 09/2010 Condition: used, functionally stored, technically complete, clear signs of wear System consisting of: 1. Large sorting/spiral conveyor pot (stainless steel) Diameter approx. 40 cm Multi-stage spiral conveyor Pneumatic separation units installed Sensors and air nozzles available Oscillating drive Sortimat / RNA design Acoustic insulation inside complete 3. Small parts sorting pot (third pot) Diameter approx. 14–16 cm Fine parts processing (e.g. pins, clips, contact parts) Precisely adjustable bunker feed and sensors 4. Linear sections / transfer units Several linear conveyors with stainless steel guides 5. Stainless steel bunker / parts storage Large stainless steel filling trough (\"bunker\") Dimensions approx. 30 × 20 cm 6. Control units Sortimat control units type SMS  ...

2-axis linear gantry (X/Y) from a dismantled assembly system, consisting of two linear axes, two servo drives and cable set. Scope of delivery 2 linear axes (X and Y axis) 2 Festo servo motors 2 Festo servo controllers Motor and signal cables Condition Used Dismantled from special machine Technical data: Axles / Mechanics Manufacturer: KML – Linear Motion Technology GmbH Year: CW 04/2020 Axis X: Type: PE4.4.0400FR005.1.02.0S-17VLSN Travel X: approx. 400 mm Axis Y: Type: PE3.4.0300FR005.1.04.0S-17VLSN Travel Y: approx. 300 mm covers / bellows available Drive / electrics Servo motor: Manufacturer: Festo Type: EMME-AS-80-M-HS-AM Servo controller: Manufacturer: Festo Type: CMMT-AS-C3-11A-P3-PN-S1 Quantity: 2 servo drives (one per axis) Auction-ID: A7-49816-63

- Chipping line for the treatment of natural wood. - Includes: • Feed hopper with inclined metal belt, for loading wooden pieces. • Vibratory load conveyor belt. • PALLMANN PHT 660 x 1050 chipper: main motor power 735 KW-992 rpm, rotor rotation speed 306 rpm, rotor diameter 2000 mm, rotor with 4 knives, feeding speed 38.60 m/min, chip thickness 31.50 mm. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-49881-2

Feeding system with bunker, spiral conveyor + linear section Manufacturer: Rhein-Nadel Automation GmbH (RNA) Type: MB-Type13 Serial number: 10165609 Year of construction: 2014 RNA BVL-25 (bunker) – year 2015 Storage container Permissible load: 25 kg Automatically supplies spiral conveyor with material RNA SRC-N 400-2R (spiral conveyor / vibratory spiral) – year of manufacture 2015 Sorts and orients parts Vibration frequency: 100 Hz / 6000 min⁻¹ 200 V, 4.26 A, 852 VA RNA SLL400-800 (Linear oscillator / linear section) – Year 2014 Linear transport of the sorted parts 200 V, 0.6 A, 120 VA Vibration frequency: 100 Hz / 6000 min⁻¹ MB-Type13 Main system (feeding system compact module) – Year 2014 Frame, control cabinet, operation Multiple control 3x control units (21A0 / A1 / A2) Technical data: Dimensions: 2.10 × 1.00 × 1.35 m Auction-ID: A7-49816-13

2-axis linear gantry (X/Y) from a dismantled assembly system, consisting of two linear axes, two servo drives and cable set. Scope of delivery 2 linear axes (X and Y axis) 2 Festo servo motors 2 Festo servo controllers Motor and signal cables Condition Used Dismantled from special machine Technical data: Axles / Mechanics Manufacturer: KML – Linear Motion Technology GmbH Year: CW 04/2020 Axis X: Type: PE4.4.0400FR005.1.02.0S-17VLSN Travel X: approx. 400 mm Axis Y: Type: PE3.4.0300FR005.1.04.0S-17VLSN Travel Y: approx. 300 mm covers / bellows available Drive / electrics Servo motor: Manufacturer: Festo Type: EMME-AS-80-M-HS-AM Servo controller: Manufacturer: Festo Type: CMMT-AS-C3-11A-P3-PN-S1 Quantity: 2 servo drives (one per axis) Auction-ID: A7-49816-64

2-axis linear gantry (X/Y) from a dismantled assembly system, consisting of two linear axes, two servo drives and cable set. Scope of delivery 2 linear axes (X and Y axis) 2 Festo servo motors 2 Festo servo controllers Motor and signal cables Condition Used Dismantled from special machine Technical data: Axles / Mechanics Manufacturer: KML – Linear Motion Technology GmbH Year: CW 04/2020 Axis X: Type: PE4.4.0400FR005.1.02.0S-17VLSN Travel X: approx. 400 mm Axis Y: Type: PE3.4.0300FR005.1.04.0S-17VLSN Travel Y: approx. 300 mm covers / bellows available Drive / electrics Servo motor: Manufacturer: Festo Type: EMME-AS-80-M-HS-AM Servo controller: Manufacturer: Festo Type: CMMT-AS-C3-11A-P3-PN-S1 Quantity: 2 servo drives (one per axis) Auction-ID: A7-49816-62

Afag Control Unit IRG 1-S Manufacturer: Afag Type: IRG 1-S Technical Data: Degree of protection: IP54 Input voltage: 230 V Output voltage: 20–228 V (adjustable) Frequency: 50/60 Hz Rated current: 6 A Degree of protection: IP54 Function: Power and frequency controller for Afag vibratory conveyors (linear oscillator or spiral conveyor) Auction-ID: A7-49816-15

Manufacturer: Afag Automation AG / Afag GmbH Type: HLF-12-12 (Linear Conveyor / Linear Oscillate) Serial No.: HLF_15491 Technical Data: Modell / Type: HLF-12-12 Voltage: 24 V DC Current consumption: 1.3 A Power: 31 W Degree of protection: IP 54 Stroke frequency: 100 Hz Linear rail: mounted, approx. 50 cm Auction-ID: A7-49816-14

TOX Double Press (2-Cylinder System) Manufacturer: TOX Pressotechnik Model: Kraftpaket line-X – Double Cylinder Type Cylinder: X-K 008.3030.100.12H System: 1 Press = 2 Coupled Cylinders Condition: used, complete, dismantled from industrial production Technical data: TOX Kraftpaket line-X 2× Cylinder Type X-K 008.3030.100.12H incl. central control block, pressure gauge and sensors Robust industrial design Dimensions: Length approx. 80 cm Width approx. 30–32 cm Height approx. 25 cm Weight approx. 80 kg Series: TOX Kraftpaket line-X, Type X-K Force class: Size 008 (medium press force class) Stroke configuration: 30 mm pre-stroke + 30 mm Force/setting stroke Total stroke: 60 mm Powerpack stage: 100 (≈ 50–60 kN at 6 bar) Max. operating pressure: 6 bar (according to the blade) Volume: 47 ml Version: 12H (reinforced / Heavy Duty) Application: joining, embossing, clinching, punching, ...

Key data: 2 mm

Slitting and cut-to-length line Sheet width. 1,500 mm Sheet thickness.. 0.4 - 4.0 mm Belch width 4 mm 700 mm Slitting 2.0 mm 4 pcs. Straightening rollers... 8 pcs. Coil weight 7,000 kg Facility consists of: - Bundle pallet truck -Decoiler -Loop control -Straightening machine -Strip scissors -Cross shears 1,500 x 4.0 mm - Electrical control. Line complete overhauled, new control, all defective parts replaced, part painted RA 60 11

Slitting and cut-to-length line Strip width... 1,500 mm Strip thickness 0.5 - 2.0 mm Cutting number... 7 strips Straightening rollers 8 pcs. Coil weight.. 7,000 kg Rewinder .. 7,000 kg

Longitudinal cut-to-length line Strip width 1,500 mm Band thickness. 0.5 - 3.0 mm Number of cuts . 5 pcs. Straightening rollers. 7 pcs. Coil weight.. 7,000 kg Rewinder ... 7,000 kg Facility consists of: -Pressing arm -Unwinder -Belt removal wedge - Straightening machine -Strip scissors -Cross shears -Band brake -Reel -Control panel -Electrical control

Used complete line for crown cork clusures manufacturing. Including press PTC027/1996 year/ and lining machine PMC250/2001 year/. Liners profile 916. In 2015 original SACMI CVS system installed.

Strip width... 650 mm Band thickness 0.2-3.0 mm Coil weight.. 5 tons. Coil I Diam. . 400/500/600 mm Coil A Dia. 1,500 mm Yield strength... 700 N/mm2 Strip width.. 10 - 250 mm Speed 150 m/min. Working direction.. right/ left Facility consists of: -Decoiler -Belt removal wedge -Scissor breasts 2 pcs. -Scrap wrapper -Band brake -Brake rollers 2 pcs. -Reel -Separation arm -2 control panels -Electrical control cabinets -Central hydraulics -Tools Plant dismantled in workshop

Used TETRA PAK TBA19 200 ml Slim filling lineTechnical Specifications & Performance DataThis used bottling line is a Tetra Pak carton filling and secondary packaging solution built around a Tetra Pak TBA 19 V10 filling machine. The line is configured for the 125 ml Slim carton format and includes filling, straw application, tray packing and conveying equipment for compact beverage production and industrial packaging operations.Filling machine: Tetra Pak TBA 19 V10Format: 200 ml Slim cartonYear of manufacture: approximately 1996Running hours: approximately 26,000 hConveyor length: approximately 30 metersConveyor configuration: 4 × 90° curves and 2 × chain tensionersAdvanced Automation & Control SystemsThe equipment is arranged as an integrated filling and packaging line, allowing the filler, straw applicator, tray packer and conveyor system to operate as connected production stages. Th ...

Slitting line Stainless Steel Strip width.. 500 mm Belt thickness... .02-3.0 mm Coil weight. 5 to. Speed 150 m/min. Minimum belt width.. 13 mm Strip number 10 Coil I Dia. 400 / 500 mm Shaft diameter.. 145 mm Control... Siemens S 5 Facility consists of: -Coil car -Uncoiler + Snubber roll - Pieler table -Paper Wrapper -Edge controll system -Pinch roll -Scrap shear - PVC coating unit -Side guide 2+2 rolls -Slitting head -Roll table -Scrap winder -Tension unit -Recoiler, separator shaft -Paper wrapper -Turnstile 2 arms -Electrical & Automation system -Camera system

Used MEC ISO DPS 12-12-1C bottling line - 2600 BPHTechnical Specifications & Performance DataThis used bottling line is configured for glass bottle handling in 0.33L and 0.5L formats. The line combines filling, carbonation, sterile filtration, CIP cleaning, labeling, date coding and rotary bottle handling equipment for beverage production and industrial packaging applications.Container type: Glass bottlesCompatible formats: 0.33L and 0.5L bottlesFiller: Eurostar ISO DPS 12/12/C counter-pressure filler, 2,600 bphSTS labeling machine: S2T3/R1 front, back and neck labeling with date stamping, 2,500 bphCanellitech wraparound labeling machine: 3,000 bphCondition: Fully refurished in 2022. Filtration: 5 micron, 1 micron and 0.45-micron sterile filtration stagesCIP system: 2 x 350L tanksAdvanced Automation & Control SystemsThe line includes dedicated date-coding equipment, combining the STS int ...

Used CSAK brewing canning line 2500 cans-hourTechnical Specifications & Performance DataThis complete canning line is a used, fully reconditioned industrial packaging system designed for beer production in standard 330 ml cans. Built around an atmospheric filling process, the line provides a coordinated solution for empty-can handling, filling, labeling and date or lot coding.Production capacity: 2500 cans/hCan format: 0.33L standard cansFilling method: Atmospheric filling, not counter-pressure fillingFiller manufacturer: Cask Brewing SystemsYear: 2014Advanced Automation & Control SystemsThe line includes guarded conveyor-based equipment with integrated operator controls. Visible features include touchscreen control interfaces, status-light towers, pushbutton controls and emergency-stop devices. Pneumatic lines, valves and adjustable conveyor guide components support controlled handling  ...

CIDAN QLA-PROFI slitting and cut-to-length line is designed for the efficient machining of sheet metal fed from a coil. It enables the slitting of material with a maximum thickness of 3 mm into strips of a specified width, as well as cut-to-length into sheets with a maximum length of 1550 mm. The combination of both cutting methods in one process enables the efficient preparation of the material for subsequent machining stages while maintaining high dimensional accuracy and repeatability. The CIDAN QLA-PROFI 1550/1,5 coil slitting line consists of machines built between 2008 and 2011, which were combined into one complete system in 2023. It includes: – 5t sheet metal decoiler – CIDAN QLA-PROFI cutting unit with straightening and feeding rolls, circular knives for slitting and a guillotine for cut-to-length – SPX-20/130-2C hydraulic table – sheet metal recoiler – scrap r ...

It is compatible with the following ultrasound systems: Toshiba Aplio XG (SSA-790A) and Toshiba Aplio 500 (TUS-A500). Condition: Used equipment, sold as is Auction-ID: A1-50069-171

The GE 12 L-RS linear probe is a must-have tool that offers a wide range of frequencies for high-quality ultrasounds. With frequencies ranging from 4.5 to 13 MHz, this probe is ideal for musculoskeletal, neonatal, pediatric, and peripheral vascular applications. Its compact footprint and 39 mm field of view make it an ideal choice for a variety of medical needs. Compatible with the GE ultrasound range, Vivid Condition: Pre-owned equipment, sold as is Auction-ID: A1-50069-222

The Toshiba PLT-604AT linear probe has a frequency range of 4.0 MHz to 10.0 MHz and is compatible with Toshiba Aplio 50 (SSA-700A) ultrasound systems. Condition: Used equipment, sold as is Auction-ID: A1-50069-211

The GE L4-12t-RS linear probe is a must-have tool that offers a wide range of frequencies for high-quality ultrasounds. With frequencies ranging from 4.2 to 13 MHz, this probe is ideal for musculoskeletal, neonatal, pediatric, and peripheral vascular applications. Its compact footprint and 39 mm field of view make it an ideal choice for a variety of medical needs. Compatible with the GE ultrasound system, Vivid Condition: Pre-owned equipment, sold as is Auction-ID: A1-50069-220

Condition: Used equipment, sold as is Auction-ID: A1-50069-176

For ATL UM4/UM4PLUS/UM5/UM8/UM9 Condition: Used equipment, sold as is Auction-ID: A1-50069-101

The ATL probe of superior quality, they are easy and quick to install. • No configuration, you can reuse your ultrasound machine right away. • The linear ultrasound probe uses ultrasound that is sent in the axis of its membrane. These ultrasounds make it possible to obtain a real-time image. • The linear probe is widely used in radiology to examine parts of the body very close to the skin, such as muscles, tendons, thyroid. Condition: second-hand equipment, sold as is Auction-ID: A1-50069-107

Compatible with the Sonosite 180 Plus Ultrasound System Condition: Used equipment, sold as is Auction-ID: A1-50069-158

The Philips L7540 linear probe has a frequency range of 5.5 MHz to 7.5 MHz and is compatible with vascular applications. It works with the ultrasound systems: HP Sonos 4500 and HP Sonos 5500. Condition: Used equipment, sold as is Auction-ID: A1-50069-103

Probe compatible with TOSHIBA models: • SSA-660A/680A (Xario) • SSA-700A/770A/780A/790A (Aplio) The Toshiba PLT-805AT is a linear probe compatible with Toshiba Aplio and Xario ultrasound systems. It is used for small organ and vascular imaging examinations. Condition: used equipment, sold as is Auction-ID: A1-50069-213

Condition: Used equipment, sold as is Auction-ID: A1-50069-153

The Hitachi EUP-L53 L linear probe has a frequency range of 5.0 MHz to 10.0 MHz and is compatible with vascular applications. It is also compatible with the Hitachi EUB-900 and Hitachi Hi Vision Avius ultrasound systems . Condition: Used equipment, sold as is Auction-ID: A1-50069-184

It is compatible with Siemens Sonoline Antares ultrasound systems. Condition: used equipment, sold as is Auction-ID: A1-50069-145

Probe compatible with TOSHIBA models: • SSA-660A/680A (Xario) • SSA-700A/770A/780A/790A (Aplio) The Toshiba PLT-805AT is a linear probe compatible with Toshiba Aplio and Xario ultrasound systems. It is used for small organ and vascular imaging examinations. Condition: used equipment, sold as is Auction-ID: A1-50069-218

The Siemens VF7-3 linear probe has a frequency range of 3.0 MHz to 7.0 MHz and supports the following applications: abdominal, breast, cerebrovascular, fetal, obstetric, gynecological, musculoskeletal, thyroid, pelvic, and pediatric. The Siemens VF7-3 probe is compatible with Siemens Sonoline Antares ultrasound systems. Condition: Pre-owned equipment, sold as is Auction-ID: A1-50069-129

Condition: Used equipment, sold as is Auction-ID: A1-50069-118

The Philips L17-5 linear probe has a frequency range of 5.0 MHz to 17.0 MHz and is compatible with Philips iU22 ultrasound systems. Condition: Pre-owned equipment, sold as is Auction-ID: A1-50069-223

The Aloka UST-5545 linear probe has a frequency range of 4.0 MHz to 13.0 MHz and is compatible with the following applications: small parts, vascular, and breast. It is compatible with Aloka SSD-5000 ultrasound systems. Condition: Used equipment, sold as is Auction-ID: A1-50069-148

The GE L764 linear probe has a frequency range of 7.0 MHz and is compatible with vascular applications. It works with the GE Logiq 400 and GE Logiq 500 ultrasound systems. Condition: Used equipment, sold as is Auction-ID: A1-50069-160

The GE 12 L-RS linear probe is a must-have tool that offers a wide range of frequencies for high-quality ultrasounds. With frequencies ranging from 4.5 to 13 MHz, this probe is ideal for musculoskeletal, neonatal, pediatric, and peripheral vascular applications. Its compact footprint and 39 mm field of view make it an ideal choice for a variety of medical needs. Compatible with the GE ultrasound range, Vivid Condition: Pre-owned equipment, sold as is Auction-ID: A1-50069-221

Condition: Used equipment, sold as is Auction-ID: A1-50069-157

Condition: Used equipment, sold as is Auction-ID: A1-50069-131

It is compatible with ultrasound systems: Philips HD11, HD11XE, iU22 and iE33. Condition: second-hand equipment, sold as is Auction-ID: A1-50069-182

The Philips L17-5 linear probe has a frequency range of 5.0 MHz to 17.0 MHz and is compatible with Philips iU22 ultrasound systems. Condition: Pre-owned equipment, sold as is Auction-ID: A1-50069-192

It is compatible with ultrasound systems: Philips HD11, HD11XE, iU22 and iE33. Condition: second-hand equipment, sold as is Auction-ID: A1-50069-174

Probe compatible with TOSHIBA models: • SSA-660A/680A (Xario) • SSA-700A/770A/780A/790A (Aplio) The Toshiba Plt-1204bt is a linear probe compatible with Toshiba Aplio and Xario ultrasound systems. It is used for small organ and vascular imaging examinations. Condition: used equipment, sold as is Auction-ID: A1-50069-214

The General Electric SP10-16 Linear Probe is an ultrasound transducer used to produce high-resolution images of superficial tissues and musculoskeletal structures. It offers a wide frequency range and deep penetration, making it a versatile tool for clinical applications such as radiology, cardiology, and emergency medicine. • Type: Ultrasound Transducer• Field of View: 33.7 mm Field of View (FOV) • Specialty: Pediatric, Small Parts, Musculoskeletal, Anesthesia, Vascular • Bandwidth: 18 MHz • Compatibility: GE Voluson 730 Condition: Pre-owned equipment, sold as is Auction-ID: A1-50069-193