production plant used for sale

Year: 2014 - technically efficient, ready to work – after full service - working dimensions: 2750 x 1300 mm - tilting stop pins - pneumatically tilted - sliding/brush strips

Used ALFA LAVAL oil production lineTechnical Specifications & Performance DataThis complete olive oil processing line is engineered for continuous production with a throughput of 2 tons per hour. Built around proven Alfa Laval technology, the line combines robust mechanical design with food-grade materials to ensure reliable operation and consistent oil quality. Its modular configuration streamlines the core olive oil extraction steps from washing and preparation through malaxation and separation.Overall capacity: 2 tons/hourDecanter centrifuge: Alfa Laval NX 17Disc separators: Alfa Laval 407, automatic (2 units)Malaxers (double): Stainless steel (3 units)Malaxer (small): Stainless steel, with paste pump P 60 (1 unit)Crusher: Stainless steelOlive elevator: Integrated feedingOlive washer: Pre-cleaning and debris removalElectrical control panel: Alfa LavalConveying: Various screw conveyors ...

Year: 2006 - technically efficient, ready to work – after full service - screwdriver - automatic screw feeding system - tilting table top - fittings punch (straight cut)

Year: 2014 - technically efficient, ready to work – after full service - working dimensions: 2750 x 1300 mm - tilting stop pins - pneumatically tilted - sliding/brush strips

The Mac Ewans Centrifugal pump is a pump for use in sanitary applications. Previous used in a Casein plant. Motor: 7,5 kW - 400 V - 50 Hz - 1.465 rpm - 13,9 A. Diameter of the impellor: 180 mm. Connections on the inlet: 3. Connections on the outlet: 2,5. Estimated capacity: ± 30.000 ltr/h., macewans.co.nz/, Type of Machine: Centrifugal pump, Stock Number: 1446, Diameter of the impellor: 180 mm, Motor: 7,5 kW - 400 V - 50 Hz - 1.465 rpm - 13,9 A, Estimated capacity: ± 30 m3/h

Tebel OST-IV Closed cheese vat of 8.000 ltr. Double jacketed for injection of steam or hot water so the temperature of the milk inside the vat can be indirectly adjusted. Stirring, cutting tools, welded to a horizontal shaft. This is driven by a drive unit with frequency converter. During cutting the tools rotate in the opposite direction as during stirring. The coagulum is cut by sharp radial knives of stainless steel. Whey can be drawn off through a perforated pipe (whey suction device). This pipe is lowered into the whey until it is only just immersed. The curd is discharged through the bottom valve. The vat is inclined (4%) toward the bottom valve to facilitate emptying. After a production run the vat is cleaned by four rotating CIP nozzles located in the top. All parts are made of stainless steel AISI 304 except the drive unit. Stainless steel MCC panel at the backside, close to the ...

Tebel OST-IV Closed cheese vat of 8.000 ltr. Double jacketed for injection of steam or hot water so the temperature of the milk inside the vat can be indirectly adjusted. Stirring, cutting tools, welded to a horizontal shaft. This is driven by a drive unit with frequency converter. During cutting the tools rotate in the opposite direction as during stirring. The coagulum is cut by sharp radial knives of stainless steel. Whey can be drawn off through a perforated pipe (whey suction device). This pipe is lowered into the whey until it is only just immersed. The curd is discharged through the bottom valve. The vat is inclined (4%) toward the bottom valve to facilitate emptying. After a production run the vat is cleaned by four rotating CIP nozzles located in the top. All parts are made of stainless steel AISI 304 except the drive unit. Stainless steel MCC panel at the backside, close to the ...

Hitec, Z-Elevating conveyor belt., Dimensions in the photo album., More information on request.

Double wall production, 2 folding pallets, Fabr. Swinging hammer, = for production, e.g. for double walls, production dimensions: 1 x 12.50 x 3.10 m - 1x 12.50 x 3.58, Steel decking flat and level - incl. vibrator - incl. control - incl. converter

Weinig Unicontrol 10 (UC 10) mitre saw system for the manufacture of windows, components and doors. Suitable for frame-by-frame, batch or individual part production, with 2 tenoning and slotting spindles, including an Oertli tool set Units: 1. Cross-cut saw, NC axis, 3 kW, ø 40 mm, 2,800 rpm 2. First tenoning and slotting spindle, NC axis, ø 50 mm, 15 kW, Technical data: Clamping length: 640 mm (8 x 80) mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

Number of milling spindles: 2 St. fence: ja ja /nein workpiece: ja STEGHERR Cross-bar Milling Machine, Type KSF-mini -------------------------------------------------- Specialized milling machine for the efficient production of intersecting muntin bar joints. The KSF-mini muntin bar milling machine embodies STEGHERRs extensive experience in manufacturing specialized milling equipment for intersecting muntin joints. The KSF-mini enables the rapid and precise production of all standard intersecting muntin joints encountered in practice. Muntin bars that have already been profiled can also be processed on the KSF-mini. Precise milling is achieved because the workpiece is machined on three sides in a single clamping operation. The tools are driven by two three-phase motors, workpiece clamping is pneumatic. The profile cutter is designed to match the web width. The saw blades that perform the ...

Max. grinding length: 2000mm, max. grinding width: 1000mm, max. working height with new grinding wheel: 600mm, max. workpiece weight: 3.2t, max. table load: 4.5t, clamping surface dimensions: 2860x1000mm, tool mounting: 4x grinding wheel mounts, spindle diameter at front bearing: 90mm, grinding wheel diameter: 500mm, max. grinding wheel width: 150mm, mounting diameter: 203.2mm, spindle speed: 1000-3000/min, cross travel: electromechanical, cross travel feed: 1-5000mm/min, max. cross travel: 1100mm, smallest programmable value cross axis: 0.001, vertical travel: electromechanical, vertical travel feed: 1-5000mm/min, max. vertical travel: 650mm, smallest programmable value vertical axis: 0.001, feed drive type: hydraulic, connected load: 125kVA, length: 10,284mm, width: 5137mm, height: 3925mm, weight: 22t, operating hours: 18,176h, with documentation. An on-site inspection is possible.

Pilot plant with 3x used Tetra Laval Food - Schroder Kombinator VWK01/60-400 Scraped Surface Heat Exchangers (SSHE) for heating and/or cooling of liquid, viscous, high viscous and crystalline products. 1x used for heating, 1x used for cooling with city water and 1x used for cooling with R22 (Freon). 3x independent motors with mechanical variators for adjusting the speed. Hotwater preparation unit. Stainless steel control panel with relays controls, 3x Ampere meters, Temperature control unit, controls for feedpump and cleaningpump (pumps itself excluded). Cooling compressor (R22 Freon). Power: 380 Volt - 50 Hz - 3 Ph - 31 A. Manual available., Capacity: 20 - 100 kg/h (depending on product / trial specifications), Max. working pressure: Up to 25 bar, Cooling medium: R22 (Freon), Total Power Consumption: 380 Volt - 50 Hz - 3 Ph - 31 A, Dimensions: 240 x 140 x 200 cm, Weight: 1.000 kg

A production line with 3 KUKA KR 150-2 industrial robots for the production and handling of molded parts is offered. Rated payload per robot: 150kg, max. reach: 2700mm, 6 axes, pose repeatability: +/-0.06mm, protection rating: IP65, mounting position: floor/ceiling, axis speeds: A1: 110°/s, A2: 110°/s, A3: 100°/s, A4: 170°/s, A5: 170°/s, A6: 238°/s, motion ranges: A1: +/-185°, A2: 0° to -146°, A3: +155° to -119°, A4: +/-350°, A5: +/-125°, A6: +/-350°. Including peripheral equipment and accessories. Weight per robot without controller: approx. 1245kg. The production line was used, among other applications, for the production of plant containers and is ideally suited for processes involving plastics as well as processed fiber-based bio-residues and residual materials. It is particularly designed for molding, pressing, handling and automation processes. Inspection by arrangeme ...

CONTROLS   electronic controls ELECTRICAL SPECIFICATIONS   total power consumption: 140 kW   mains power supply: 145 kVA   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 2540 mm   space requirements -front/back-: 5000 mm   total height: 2840 mm   total weight approx.: 12000 kg Laminating machine Maximum textile width 3200 mm Maximum temperature 240 °C Heating time (at 3 m/min) approx. 2 hours Cooling time (at 6 m/min) approx. 3 hours Mechanical speed 0-40 m/min

Year: 2007 - technically efficient, ready to work - after full service - pneumatically operated rotary table -90°/0°/+90° - working range: 200 x 240 x 2500 mm - 4 kW motor - speed ​​control (inverter) - 2 electronic position indicators - pneumatic profile clamping - cooling and lubrication system - copying template

Continuous Butter Making Machine (CBM) which has a production capacity of 1.200 kg butter per hour sweet butter and 1.000 kg butter per hour cultured butter. Input of ± 2.400 liter of cultured or / and sweet cream per hour (35/42% fat, pH of ± 4,8 and infeed temperature ± 8 - 13 °C). Complete electric driven. Speed controlled large volume and long buttering cylinder with double cooling system. Cylindrical buttering drum whose principle is based on thermal friction (patented process) with adjustable, short blow bars. Complete kneading area existing out of extra-long buttermilk separating section with circulation cooling and double buttermilk clarifier (patented), injecting iced buttermilk to intensively cool the butter grain, pressing tunnel in which the buttermilk is literally squeezed out of the butter mass, which ensures the production of butter with a very low water content in ord ...

The Alfa Laval LKH Centrifugal Pump is a premium pump for use in hygienic applications. Designed for Cleaning-in-Place (CIP), the Alfa Laval LKH is ideal for hygienic applications within the dairy, food, beverage and personal care industries that require gentle product treatment and reliable operation. Motor: 4 kW (motortag cannot be read anymore). Diameter of the impellor: 165 mm. Connections on the inlet: SMS 2,5 mm. Connections on the outlet: SMS 2. Current capacity (based on the available Alfa Laval performance curves and the current motor): 22.000 ltr/h @ 3,6 bar., Additional features:, Maximum capacity of the pump with change of motor (based on the available Alfa Laval performance curves): 60.000 ltr/h @ 2,2 Bar., Type of Machine: Sanitary centrifugal pump, Stock Number: 1564, Diameter of the impellor: 165 mm, Motor: 4 kW, Current maximum capacity: 22 m3/h @ 3,6 bar

The Alfa Laval LKH Centrifugal Pump is a premium pump for use in hygienic applications. Designed for Cleaning-in-Place (CIP), the Alfa Laval LKH is ideal for hygienic applications within the dairy, food, beverage and personal care industries that require gentle product treatment and reliable operation. Motor: 5,5 kW - 380/420 V - 50 Hz - 2.910 rpm - 11,2 A. Diameter of the impellor: 165 mm. Connections on the inlet: SMS 2,5 mm. Connections on the outlet: SMS 2. Current capacity (based on the available Alfa Laval performance curves and the current motor): 45.000 ltr/h @ 3,0 bar., Additional features:, Maximum capacity of the pump with change of motor (based on the available Alfa Laval performance curves): 60.000 ltr/h @ 2,2 Bar., Type of Machine: Sanitary centrifugal pump, Stock Number: 1570, Diameter of the impellor: 165 mm, Motor: 5,5 kW - 380/420 V - 50 Hz - 2.910 rpm - 11,2 A, Current ...

Used complete line for crown cork clusures manufacturing. Including press PTC027/1996 year/ and lining machine PMC250/2001 year/. Liners profile 916. In 2015 original SACMI CVS system installed.

Year: 2002 New-exhibition machine, never used in production. - 3 motors - pneumatic profile clamping - adjustable milling length

Complete heavy-duty roller conveyor system from previous door production for self-dismantling or with separate dismantling by agreement, Approx. 75 linear metres Heavy-duty roller conveyor elements without drive, Roll lengths 500mm, roll diameter 100mm Stands, can be dismantled into individual sub-segments, of which 6 elements L5800 W600 H320mm standing up to H459mm with end-stop rocker, 2 elements L3000 W600 H320mm standing up on H450mm with end-stop rocker, 7 Elements L3800 W600 H320mm with End Stop Rocker 1 element L3050 W1150 H450mm 2 cross carriages L2800 B800 H450mm with rope stop 1 cross carriage L2400 B1150 H450mm with one-sided stop 1 cross carriage L2100 B1200 H450mm with single-sided stop 1 movable roller conveyor element L3800 W800 H 400mm with rope stop & stanchion pockets Complete acceptance

Year: 1999 - technically efficient, ready to work – after full service - for the upper and lower hinge - centering the element - SPS control

Year: 2006 - technically efficient, ready to work – after full service - flash limit: 0.2 – 2 mm - maximum welding dimension: 3000 mm - support path - programmable PLC controller - automatic welding process

A complete bread production line with proofing equipment is offered. The production line consists of a total of nine documented components: WP Kemper lifting and tipping device HK200L, WP Haton conical rounder CR59-AT, WP Haton dough divider V300, WP Haton conveyor 500mm, WP Haton conveyor 1000mm, WP Haton intermediate proofer AF2002, WP Haton discharge conveyor with retracting belt, WP Haton long moulder Combi UL and WP Haton delay conveyor. Inspection possible by appointment.

Year: 2002 New-exhibition machine, never used in production. - option to use up to 4 heads - top and bottom mortising - automatic operating cycle; easy adjustment of milling depth and height

Emmeci MC2004 MEB – Rigid-box production machine Year: 2006 Min. box size: 83 × 31 × 12 mm; max.: 600 × 400 × 190 mm Min. sheet size: 180 × 95 mm; max.: 900 × 760 mm Output: up to 36 cycles/min Suction-belt width: 720 mm Corner-staying roll diameter: 400 mm For the production of covered rigid boxes. Reference: PP-27798 Further information on request.

Complete Karl Schnell GmbH & Co. KG, Germany processing line for the production of processed UHT cheese from natural cheese blocks. The complete processing line is designed for the continuous and efficient processing of natural cheese into a processed cheese product suitable for UHT processing and aseptic filling (ideal for IWS / Triangle and foil wrapped cheese packaging). The line combines the necessary processing equipment for cheese preparation, melting and resting to achieve a consistent final product quality. The line offers a flexible production capacity and is suitable for industrial-scale production of processed cheese products. Capacity of end product of the line: 200 - 750 kg/h output. Year of manufacturing of the complete line: 2011. Project number: AK09-2971. Processing line number: 09-164., The complete line exist out of the following machines:, A) Processed Cheese Blending ...

Hello, we would have a complete production line for PV modules in Germany at a reasonable price . Consisting of the following machines and systems. 3 x Stringer TT2000 i8 M12 Halbezelle 12 BB Cell cutter + automatic handling 3D-Micromac 4 x Laminator Meyer Solution Automatic glass loading automatic transverse interconnection Mondragon Flasher Ecoprogetti 2 x Foil cutter Robust automatic frame station 40 modules with a total of 9 workers can be created per hour. If you have any questions, please feel free to contact me. There is no price. We sell by bid.

Aumann LWS/K 6-160 linear winding machine / production system for niQ stators, year of manufacture 2016. Two identical machines are available. Technical data: compressed air connection 5 bar, mains fuse 32 A, rated current 7.2 A, operating voltage 3 x 400 V / N / PE, 50 Hz, control voltage 24 V DC, connected load 5 kVA. Dimensions approx. 1,950 x 1,970 x 2,150 mm (L x W x H). The machines are offered including documentation. An on-site inspection is possible by appointment.

The Fristam FKL 150 is a rotary positive displacement pump which can handle dairy products (e.g., yoghurt, quark, curd and butter), solids (e.g., cherries and olives), slurries, pastes, and a variety of liquids. The rotors are balanced. The diameter of the shaft is up to 25% larger than other manufacturers shafts and is solid made of 316L stainless steel. The FKL 150 is a close clearance PD pump to be designed for True CIP (Clean In Place). Duo - twin wing stainless steel lobes. Nominal displacement: 0,981 liter per revolution. Maximum nominal capacity: 35,3 m3/h. Inlet connection: 3. Outlet connection: 3. Maximum product pressure: 20 bar (300 psi). Maximum pump speed: 600 rpm. The pump is used in a food factory for product pumping. The current motor with this pump is 7,5 kW - 1.445 rpm - 400 V - 50 Hz - 14,8 A and the lobe speed is converted to 147 rpm, which results in a capacity of 8, ...

Year: 2002 New-exhibition machine, never used in production. - flash limit: 0,8 – 2 mm - angle range 30-180 degrees - maximum welding height: 200 mm - maximum welding width: 215 mm (at 90°)

ZNHZ-508A Envelope Making Machine - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl ZNHZ-508A Envelope Making Machine Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers and Lifts Laminators Offset printing machinery Others Packaging machines Paper drills Perfect binders Pile turners Spare parts Stitching machines ZNHZ-508A Envelope Making Machine Price: 7000 EUR Download PDF ZNHZ-508A Envelope Making Machine Paper weight 70 – 150 g/m² Production rate 3000 – 9000 pcs/h Maximum folded envelope size Western Style 324 x 229 mm Min. folded envelope size 100 x 100 mm Power 8 kW Weight 3000 kg Dimensions 6600 x 1200 x 1300 mm Year of manufacture 2014. Key advantages of the machine: – A bottom-mounted vacuum  ...

Tetra Pak ​​​​​​​​​​​​Tetra Therm Aseptic VTIS line with Tetra Alex TA400 homogeniser. Aseptic processing unit for continuous UHT treatment with direct steam injection. Mainly for heat-sensitive low-acid products such as milk, enriched milk, cream, soy milk, formulated dairy products, ice-cream mix, dairy desserts as well as ESL (extended shelf life) products. Previously used in a milk factory in Europe., The unit is fully automated to safeguard the aseptic status while in production. The operation can be divided into four steps:, - Pre-sterilization, - Production, - Aseptic intermediate cleaning (AIC), - Cleaning in place (CIP), Before production can start, it is necessary to sterilize the aseptic area by circulating pressurized hot water. After sterilization, the unit is cooled down to production temperature. Finally, sterile water is circulated through the prod ...

Purified Water Production Skid Manufacturer: Ovivo Year: 2013 Production capacity: 0.25m3/h permeate (over 16 hours of operation per day) Technical documentation available The installation includes: - A hardness analysis. - Dechlorination on a 5μm activated carbon filter. - Sodium injection to ensure the proper functioning of reverse osmosis. - 1μm filtration - A pH measurement - A reverse osmosis system consisting of two high-pressure tubes and a concentrate recirculation network. - A conductivity analysis at the outlet of each reverse osmosis tube. Used purified water station tested and functional Auction-ID: A1-51057-3

Complete skid-mounted Tetra Pak Tetra Alcross Bactocatch MB Microfiltration (MF) plant, type 1 x M74 / 1 x M19, manufactured in 2011 and specifically designed for hygienic dairy processing applications., The Tetra Alcross Bactocatch system is designed for the highly efficient removal of bacteria and bacterial spores from milk by means of ceramic membrane microfiltration combined with High Temperature Treatment (HTT) of the cream fraction. The process can achieve a bacterial and spore reduction of up to 99.9999%, depending on the product and operating conditions., The fully skid-mounted installation is designed for continuous microfiltration of milk and is suitable for applications including the reduction and removal of bacteria and spores from skim milk, cheese milk and ESL milk, as well as protein fractionation. The plant was previously operated for the treatment of skim milk for the re ...

# Complete Industrial Compressed Air Production and Treatment System – Atlas Copco GA 250 VSD+ FF & BD 1400+ Overview Complete industrial compressed air production and treatment installation manufactured primarily by Atlas Copco, comprising a GA 250 VSD+ FF rotary screw air compressor, a BD 1400+ adsorption air dryer, filtration equipment, electrical control systems, pressurised vessels, ventilation ducts, pipework and associated auxiliary components. The system is designed to provide compressed air for industrial applications requiring air compression, drying and filtration. Its integrated configuration combines the main compressor with downstream air treatment equipment and associated distribution components. The lot includes the main compression unit, adsorption drying system, filters, electrical cabinets, control equipment, pressurised vessels, pipework, valves, inst ...

Mopac MKM-1-6000-2500 Sandwich Panel Production Line – Unused Specifications: Brand: Mopac Type: MKM-1-6000-2500 Application: Sandwich Panel Production Condition: Unused Maximum panel length: 6,000 mm Maximum panel width: 2,500 mm Number of press cylinders: 52 Connection: 400 V Maximum machine weight: 15,300 kg Total machine dimensions: approx. 22,000 x 5,200 x 2,500 mm Dimensions of compacting surface: approx. 2,600 x 6,000 mm Conveyor belt width: approx. 2,600 mm Conveyor belt length: approx. 8,500 mm Features: Conveyor belt Overhead bonding installation Conveyor belt Adhesive installation with laser control Granulate supply from big-bag Mopac Pneumatic Panel Press 52 pneumatic press piston machines Handbook Particularities: Unused production line for sandwich panel production Suitable for panels up to 6,000 x 2,500 mm Pneumatic panel press equipped w ...

TECHNICAL DATA: Installed power: 1.1 kW Work table: 800 x 800 mm

Serviced Continuous Butter Making Machine (CBM) equipped with a new Rittal control panel with simple and user-friendly controls. Stainless Steel frame execution. The machine is designed for the continuous production of sweet butter from cultured and / or sweet cream and is suitable for hygienic dairy processing applications. The CBM has a butter production capacity of approximately 1.500 kg per hour and is designed for an input of approximately 3.000 litres of cultered or / and sweet cream per hour (38/42% fat, pH of 4,5/4,8 and infeed temperature ± 10 - 13 °C). Completely electrically driven; Churning cylinder / Beater I: 22 kW, Churning cylinder II: 2,2 kW and Squeezer / Working section: 5,5 kW., The machine is equipped with a new Rittal electrical control panel, incorporating simple and clearly arranged controls for the main machine functions. The control panel includes:, - 3 x Danf ...

APV Direct Steam Injection (DSI) Uperizer UHT processing Plant with Aseptic Homogeniser, previously used for the sterilisation of milk and dairy products. The installation has a processing capacity of 7.600 litres per hour and is designed for high-temperature sterilisation at temperatures of up to 150°C., The system utilises direct steam injection for rapid product heating, followed by flash cooling under vacuum to achieve the desired processing temperature. The line is equipped with an APV Gaulin MC 45-5TPSX aseptic homogeniser, ensuring efficient homogenisation under high pressure for consistent product quality., In the Uperizer head, pure, culinary-grade steam is injected directly into the product flow under high pressure. This causes the temperature to rise almost instantaneously—within fractions of a second—to between 140 °C and 150 °C. The milk is then held at this temperatu ...

number of aggregates: 2 St. working width: 2000-3500 mm work height max.: 2450-3200 mm Wintech M9Cb Sealing Machine Automatic sealing system for wooden windows and doors with 2 processing units. For a detailed description, see the PDF document. ----------------------------------- Manufacturer’s technical description: M9Cb robotic sealing system The machine comprises a robust structure made from aluminium profiles, fitted with motorised conveyor belts on which the window units are transported. The silicone is distributed evenly into the joint by means of two automatically controlled nozzles. The electronic control system, which is in constant communication with the sensor, determines the movement of the guns and the operating parameters. Technical data: Standard Optional Max. window width 2000 mm 3500 mm Max. window height 2450 mm 3200 mm  ...

Technical details Type: Noodle cutting knife assembly Quantity: 3 units Configuration: - Ribbed stainless steel cutting roller - Mobile support frame - External drive connection for gearbox/motor Application: - Cutting dough sheets into noodle strands - Pasta and noodle production lines Construction: - Stainless steel cutting assembly - Industrial frame construction Dimensions (per unit): - Length: Approx. 1200 mm - Width: Approx. 500 mm - Height: Approx. 1000 mm Weight (per unit): Approx. 90 kg Condition: Used Observed condition: - Visual condition cannot be verified from the available information - Operational status unknown Auction-ID: A7-51359-11

Technical details Type: Phyllo dough production line Configuration: - Dough mixer - Dough feeding hopper - Multi-stage sheeting and calibrating rollers - Conveyor system - Cross-transfer conveyor - Laminating section - Cutting and stacking table - Electrical control cabinets - Variable-speed drive controls - Operator control panels Application: - Continuous production of phyllo (filo/yufka) dough - Industrial bakery production Construction: - Modular processing line - Stainless steel product contact components - Integrated conveyor system Dimensions: - Length: Approx. 18000 mm - Width: Approx. 3000 mm - Height: Approx. 2600 mm Weight: Approx. 7000 kg Condition: Used Observed condition: - Line appears substantially complete - Roller stations and conveyors installed - Electrical cabinets and control panels present - Safety guards fitted on processing sections ...

Technical details Type: Chocolate production line Visible processing module: - Manufacturer: PAND - Model: DZD-100 - Year: 2020 - Installed power: 35 kW - Power supply: 400 V / 50 Hz Configuration: - Chocolate moulding and processing line - Cooling tunnel - Stainless steel conveyor system - Depositing/forming section - Demoulding module (PAND DZD-100) - Electrical control cabinet - HMI touchscreen control system Application: - Chocolate production - Confectionery manufacturing - Continuous food processing Construction: - Hygienic stainless-steel construction - Modular production line - Integrated conveyor system Dimensions: - Length: Approx. 12000 mm - Width: Approx. 1500 mm - Height: Approx. 2200 mm Weight: Approx. 3500 kg Condition: Used Observed condition: - Complete integrated production line - PAND DZD-100 processing module installed - Electrical ca ...

Production line of suppositories and ova made of strips of PVC, PVDC, PVC + PE and aluminum. The working procedure requires 2 coils that are aligned to be welded and honeycombed in the forming station. The cells are then sheathed at the bottom and pre-cut. Then the cells pass under the dosing station to be filled. After filling, the cells are cut into strips of 28 or 30 suppositories, in order to obtain the suppositories by 4, 5, 6 or 7 depending on the size of the cells and the spacer. The belts then enter the cooling tunnel which solidifies the product. At the outlet, the strips enter the heat sealing station where they are welded, sealed and codified before being trimmed at the top. Finally, the strips are cut into segments according to the desired quantity. The line is composed of 3 elements, the cell forming block and filling, the cooling tunnel and the upper welding and c ...

Y&J:1984, 3 silos, 800 mm diameter x 1400 mm total height, with manhole lids, 3 vibration discharge floors; Inlet: 800 mm, outlet: 168 mm, height 570 mm, 1 suction filter with sack shake, filter area: 2.3 m2, 3 blow-through locks for conveyor system.

Composite plant Fabrikat Linde,with 3 pcs.Bitzer compressor type.4EC 4.2Y 22.7m3/h. 40Kw.at minus 10 degrees evaporation temperature.

Ladies and gentlemen, Below you will submit a non-binding offer for a foundry plant: 1 piece br. Endogas production plant, make LOI natural gas-heated, with modern measuring/control and control system and modern KROMSCHRÖDER torches, solid top fittings, compressors with separate mounted shaft and separate motor, 100 Nm3/h in 3-stage version, power min. 35 Nm3/h The power can be reduced to 40 Nm3/h. The operation of the system can also be carried out in a 1-stage manner, so that the power can be reduced accordingly. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are ap ...

Cat.-Nr. 11-3315 in a very good condition for Cosmetic and Food Stuff Pressure Tanks with Agitator: Total Capacity: 13.320 Litres – capacity for use: 10.000 Litres Manufacturer: Schwarz Year of Construction: 1999 Material: dished bottom and jacket: 1.4539 flange for agitator, spout and cup sleeve for temperature sensor: 1.4539 other Stutzen: 1.4571 insulating jacket and pipe legs: 1.4301 (V2A) Attachments: 1.4404/1.4571 Seals: Viton Operating Instructions available For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.