pro used for sale

TECO - Batch of various Programmable Logic Controllers (PLC) Condition: unused QTY: AP-360BP-D 3x QTY:SG2-20KT-D 46x QTY:SG2-10CR-A 49x QTY:SG2-20CT-D 50x QTY:AP-360BR-A 9x QTY:AP-8EXD 9x QTY:SG2-MBUS 19x QTY:OP10-PL01 8x QTY:SG2-4AI 16x QTY:AP-8AD 6x QTY:SG2-PBUS 15x QTY:AP-8EYP 10x QTY:SG2-12KT-D 50x QTY:AP-114BR-A 18x Auction-ID: A1-46070-107

Teco - Batch of various Programmable Logic Controllers (PLC) Condition: unused QTY: SG2-DNET 15x QTY: SG2-4PT 15x QTY: TP03-60HR-D 4x QTY: TP03-40HT-A 16x QTY: SG2-10KR-A 47x QTY: SG2-12CT-D 49x Auction-ID: A1-46070-161

Classic motorized bicycle equipped with Motori Minarelli \"Mosquito\" 48cc engine. Vintage vehicle intended for restoration or collection. It is sold in the condition it is in, without a functional check. The Minarelli Mosquito engine is a model recognized in the classic moped sector, which adds additional value to the whole. Status: - Used - Unverified operation - Possible signs of wear and use Note: On-site inspection is recommended. The lot includes only what is visible in the photographs. Keywords: motorized bicycle, bicycle with motor, classic moped, classic motorcycle, classic vehicle, Minarelli engine, Minarelli Mosquito motori, Mosquito 48cc, antique moped, vintage bicycle, collector's vehicle, restoration project, classic motorcycle restoration, antique vehicle, antique motorcycle, vintage moped, classic bicycle restoration, bicycle auxiliary engine, histo ...

Mahr / Mitutoyo - Batch of professional measuring tools Condition: unused Auction-ID: A1-46070-11

Batch of unused head protection Condition: unused Weight: 12KG net Auction-ID: A1-46070-287

Auction-ID: A1-46315-67

Lot (mix) electrical cable & cable protection Weight: 17KG net Auction-ID: A1-46070-87

ESAB C280 PRO MIG/MAG welding machine ; supplied complete with torch, ground cable and reducer ; suitable for professional high-capacity welding; Voltage: 380 volts ; Capacity: 280 amps ; Torch: 5 meters ; Ground cable: 5 meters ; Reduce: yes Auction-ID: A1-45170-29

Restoration project – Lamborghini Espada S2 (1972) A lot corresponding to the classic Lamborghini Espada S2 vehicle is offered, consisting of a restored chassis and various body elements. The chassis has been restored , which forms a solid basis for the rebuilding of the vehicle. The rest of the components are in a used and partially incomplete state, as shown in the photographs. Important note: The engine is not included in this lot. This is an excellent opportunity for collectors or professionals in the classic vehicle sector, aimed at a complete restoration project or use as a source of parts. Status: Material used. Chassis restored. Other components unverified. Possible incompleteness. Additional Information: Untested operating conditions. On-site inspection is recommended. Terms of Sale: Sold in the \"as is\" condition, without warranty or claim.  ...

Batch of Rexroth linear guides / aluminium profiles – various lengths Weight: 156KG net Auction-ID: A1-46070-37

Resistance welding machine for structural steel wires from coil.

Code: 0375 Brand: GREDA Model: CFL 4 - CE Standard Contouring, milling, and sanding machine for contouring and milling on two opposing sides of a piece of wood, such as chair, armchair, sofa, gun handles, and various - CE Standard Technical data: N° 2 milling units N° 2 milling and sanding units N° 4 motors 7,5 Hp each N° 4 rotation reversals Max workable length 2500 mm Max workable height 180 mm Min/max workable width 20/320 mm Milling unit shaft diameter 35 mm Max milling tools dimensions diameter 160 mm - height 180 mm Carriage feed 30 mt/min Carriage return 30 mt/min Automatic table slowdown with stops Sanding belt length 2500 mm Automatic positioner N° 6 adjustable pressers Total installed power 36 Hp Compressed air 6 bar Overall dimensions mm 6700 x 2200 x 1800 h Weight kg 3600

Optima/alpha pack complete production and packaging line for ELISA test kits, comprising Optima ImmuCoat coating system for the manufacture of 96-well microtitre plates for ELISA tests, B&R machine control with touchscreen control panel. Operation and process steps: 1. Feeding and preparation: Microtiter plates are automatically removed from destackers and transferred to the transport system. 2. Deionisation: To eliminate static charges, the plates are deionised, which is crucial for uniform coating. 3. Coding: Each plate is assigned a unique serial number, which is recorded in the system control for quality control purposes. Keyence printer. 4. Coating: The system precisely dispenses the biological components (such as antibodies or proteins) into the wells of the 96-well plate. The system can coat up to 1.200 plates per hour. 5. Product selection: The system allows the use of up to 12 b ...

Props steel approx. 800 pcs., with approx. 20 x metal transport frame, well-maintained condition

Lot of measuring equipment – micrometers & internal measuring instruments (Mitutoyo & fine probes) – complete lot of precise measuring equipment from industrial applications. All equipment is functional and in good condition. Included: Mitutoyo disc head bracket micrometer 175–200 mm, incl. setting standard, wooden box internal measuring device 5–30 mm, mechanical, wooden box internal measuring device 25–50 mm, incl. adjustment ring Mitutoyo internal measuring device 50–75 mm, in the case additional internal measuring device in the case Only to be delivered in its entirety. Auction-ID: A7-46417-22

\" Manufacturer: Mitutoyo Type / Model: Profile projector PJ321F Machine type: Profile projector / Contour measuring device Condition: used, functional, in operation Year of manufacture: Not specified Serial number: 60005 Country of manufacture: Japan • Profile projector Mitutoyo PJ321F • Digital X/ Y display • Zoom optics 10–50× • Control panel • Base / table • Mitutoyo Micropak 5 mk II with integrated printer • Extensive accessories (see Images): • Paper rolls • Small material / fasteners • Tools • Accessory drawers The system is currently set up and under tension. A visit during ongoing operation is possible by appointment. • Projection table with cross stage (X / Y) • Digital measured value display Mitutoyo (X/Y) • Zoom lens 10–50× (P Zoom Hexanon) • Illumination: incident light / transmitted light • Projection screen with angular pitch • Pow ...

Delivery as pictured Auction-ID: A7-46417-131

High-quality Mitutoyo 10X magnification lens for precise optical measurements The Mitutoyo 172-241 is a professional projection lens with 10x magnification, specially designed for use on profile projectors and optical measurement systems of the Mitutoyo PH or PV series. It is characterized by excellent imaging performance, high edge sharpness and absolute freedom from distortion – essential properties for the exact measurement of components in the industrial sector. The robust construction and high-quality coating of the lenses guarantee a long service life and reliable measurement results in quality assurance. Features 10X magnification : Ideal for detailed inspection and measurement of small parts. Highest optical quality : Crystal clear image without chromatic aberrations for maximum precision. Precision connection : Easy to change and fit snugly on the projector's n ...

\" Measuring tools – mixed workshop lot Scope: Lot of 12 pieces Manufacturer: mixed (including M&W / unknown, one measuring device MAC), partly without marking Condition: used, functional • 1 × universal protractor / gauge with scale (0–180°) in a case • 1 × magnetic measuring device / display device (MAC) in a leather case • 1 × caliper / depth caliper (older version) • 2 × precision stop angle (various sizes) • 1 × stop angle (large) • 1 × feeler gauge set (ring tied) • 1 × steel ruler / ruler • 1 × set of small stop angle in wooden box • 1 × small measuring gauge / accessories (blue packaged, probably new/unused) • Various measuring / test gauges and accessories \" Auction-ID: A7-46417-132

\" Steinmeyer FMS AE1IH Evaluation Device with 2 Measuring Probes (IKF 10.1 / DZ...) Measuring system consisting of a digital evaluation device and two inductive touch probes. 1 × Evaluation device Manufacturer: Feinmesszeugfabrik Suhl GmbH (FMS) Brand: Steinmeyer FMS Type: AE1IH Supply: 110–127 / 220–240 V Power: 25 VA, 50/60 Hz Made in Germany Functions (according to front panel): • MAX / MIN display • Comparison measurement (COMP) • UPL / LOL limit value display • Memory and reference functions • Multi-channel display (M1–M4) • Rear interface (Sub-D) 2 × Inductive probes 1 × Steinmeyer IKF 10.1 • Inductive probe • Cable with plug 1 × Steinmeyer (Type 76 4011:011) • Inductive probe • Cable with plug \" Auction-ID: A7-46417-302

\" RENISHAW TP200 Probe Set with Accessories and Test Certificate Complete probe set from RENISHAW consisting of a TP200 probe (SF MOD) including several M2 probe inserts (straight version, different lengths) and original transport case. The probe has been tested on the RENISHAW Probe Test Rig (Test Passed). A detailed test report / measurement protocol is included and documents the repeatability as well as the preferred movement (pre-travel). Condition / scope of delivery • Condition: used, very good • Probe tested, test passed • Probe inserts mostly new / unused (orig.packaging) Scope of delivery: • RENISHAW TP200 probe (SF MOD) • Several M2 probe inserts • Original case • Original test certificate / measurement protocol • Manufacturer: RENISHAW • Type: TP200 SF MOD + TP200 • Serial number: 4W9T83 • Stylus length (reference): 50 mm • Probing force: 2 g • Te ...

\" Mitutoyo Lot – Digimatic Mini Processor DP-1VR + Accessories (17 pieces) Mitutoyo lot consisting of a Digimatic Mini processor as well as original accessories and new goods. Components: 1 × Mitutoyo Digimatic Mini-Processor DP-1VR • With integrated printer • Digimatic interface • Tolerance evaluation (GO / NG / +NG) • Statistics function • Power supply available 2 × Mitutoyo footswitch • Part No. 937179T • New in orig. 3 × Mitutoyo Connecting Cable 1 m • Part No. 937387 • New in orig. 1 × Mitutoyo USB-ITN-C Interface • Type 06AFM380C • New in orig. box Multiple signal cables / connection cables • Partly in original packaging • Labeled \"Signal Cable Caliper\" Total scope: 17 parts \" Auction-ID: A7-46417-300

Type: Forging Pliers / Hardening Tools / Thermal Protection Name: Hardening Shop Lot Forging Pliers, Thermal Protection & Melting Shells – 25 Pieces Description: Lot from the dismantling of an industrial hardening shop. Included are forging pliers of different designs and lengths for gripping and moving hot workpieces, as well as heat-protective clothing for work on heat treatment plants, and refractory melting or casting shells. The components are intended for use in forging, hardening and heat treatment plants. Sale exclusively as a complete lot. Condition: • Used Scope of delivery: • Forging pliers, various designs and lengths• Thermal protection (heat protective clothing / apron / coat) • Melting or casting shells (fireproof) • Total scope: 25 parts• Delivery as shown • Sale as complete lot • Material pliers: steel • Pliers types: forging pliers / gripping p ...

\" Mitutoyo Digimatic Mini-Processor DP-1HS (Code 264-503) Mitutoyo Digimatic Mini-Processor DP-1HS with integrated thermal printer. Manufacturer: Mitutoyo Corporation Model: DP-1HS Code No.: 264-503 Made in Japan • Data output of Mitutoyo Digimatic measuring equipment • Tolerance evaluation (GO / NG) • Statistics function • Printout of measured values • Integrated printer • Digimatic data interface • Power supply (DC 9V / 500 mA) • Instruction manual • Original box \" Auction-ID: A7-46417-299

Incremental precision measurement and displacement measurement system for precise recording of small travels. The Steinmeyer/FMS IKF 10 measuring head works incrementally and is suitable for comparative and relative measurements. The measured value is displayed via the external display unit PU 11 with digital display and switchable units (mm/inch/degree). The stable mechanical design with solid base plate, rotary table and fine adjustments allows it to be used as a stationary test or measuring station, e.g. in quality assurance, production control or development. Scope of delivery:     •    Incremental precision probe / measuring head IKF 10     •    Display unit PU 11 incl. connection cable     •    Measuring stand with base plate     •&nbs ...

Stock number: A223, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Plate heat exchanger, Heating surface: 0,6 m², Dimensions: L 495 x W 198 x H 125 mm., Total height: H 215 mm., Working temperature: 0/95° C, Working pressure: 6 bar, Manufacturer: APV, Type: T 4, Year: 1989

Manufacturer: Maja Model: FP100 Year of Manufacture: 2013 Type of Machine : Meat Portion Cutter Condition: Used Dimensions and Weight - Height: 1854 mm (2074 mm with safety hood open) - Width without outfeed conveyor: 1888 mm - Width with outfeed conveyor: 2059 mm - Depth: 1057 mm - Product outlet height: 950 mm - Infeed slot maximum meat length: 600 mm - Net weight: approx. 1500 kg - Note: Each levelling foot is individually height-adjustable by approx. 25 mm. Cutting Performance - Minimum cutting output: 20 cuts per minute (gross) - Maximum cutting output: 130 cuts per minute (gross) Electrical Specifications - Power supply - Europe: 230/400 VAC, 50 Hz, 3-phase + PE - Power supply - Japan: 200 VAC, 50 Hz, 3-phase + PE / 220 VAC, 60 Hz, 3-phase + PE - Power supply - USA: 230/460 VAC, 60 Hz, 3-phase + PE - Input current: max. 29 A (socket 32 A) - Power consumption: max. 19 kW - ...

New 50.000 litre tank, Stock number: T50B6-1, All weldings inside grinded grain 60., All weldings out side sandblasted., Tankdimension Ø 2900 x cylinder 7500 mm., The tank is made of pickled plate type B2., Density: 1,0., Working temperature 0 -+50° C., Working pressure: None, Scoop of application: A, Litre: 50.000, Material: Stainless acid proof steel AISI 316, Item: Tank, Standing: 6 pcs. legs, Top: Conical 15°, Bottom: Conical 20°, Tank cover: In the side, Pipes: Top Ø 2 and Ø 4 - Bottom Ø 3, Inner diameter: Ø 2900 mm., Cylinder: H 7500 mm., Total height: H 8825 mm., Plate type: The tank is made of pickled type B2, Inner finish: All weldings grinded grain 60, Outer finish: All weldings sandblasted, Working temperature: 0 - +50° C, Density: 1,0, Working pressure: None, Manufacturer: Handing

CNC punching machine Brand: Vitap Type: MICRA New machine High-Performance CNC machine for the production of acoustic panels with Micro-Perforation - Every 4 seconds the punching of 1.000 up to 2.331 holes are possible (depending on the workpiece) 3 controlled axes: - X-axis: drive via 2 motors and planetary reduction gear, guidance via pinion and rack - Y-axis: drive via 1 motor and planetary reduction gear, guidance via pinion and rack - Z-axis: drive via central hydraulical unit Easy handling with TPA control - Virtual display of programmed punching holes in the CAD environment - Optimization software for the working process - LCD TFT Monitor 20 - USB port - Basic Version CAD TPA - Macro programming Processing head - 5mm grid in X- and Y-direction - Punch depth: 3mm - Changable punching tools The processing head can optionally be customized  ...

CNC Drawer fronts processing machine Brand: Comec Type: FRONTAL CN 1500 2S New machine for point to point drilling and milling, with automatic loader and pieces return to the operator Structure Frame of electro-welded steel sheet of heavy-duty construction Loading system 1 fix left shoulder and 1 mobile right shoulder on which are fixed the loader, magazine and locking system. Manual adjustment of the mobile shoulder on ball bearings slides with measure indication by digital display. Automatic loader with vertical adjustable magazine. Pieces advancement system step by step with 2 working stations, complete with locking cylinders on each station. Pieces return system Pieces return system composed with: 1 transversal motorized belt kW 0.37. 2 ejector cylinders. 1 longitudinal, lateral motorized belt kW 0.37. 1st Working station: vertical-horizontal Point to Poi ...

New CNC Maschine Brand: Comec type: MD JAMB CNC machining center for complete machining of a wide range of door frames. 3 machining supports for cutting to length on miters, milling for corner connectors and door lock panels. A complete door frame element with decorative cladding and rebate cladding is machined in one set-up. A complete frame can thus be machined in approx. 2.5 - 3 min. Machining equipment can be individually adapted to the customers requirements.

CNC - processing center Brand: COMEC Type: MD TOP The ideal CNC solution to process narrow and complicated work pieces EASY with COMEC processing length up to 2.000 mm Head configuration individually customizable for: - saw with 360° - axis - milling unit for horizontal and vertical processing - drilling head with separate jumping spindles vertical and horizontal - multiple spindle drilling heads separate jumping even horizontal - horizontal milling unit with 360° C - axis Special developed clamping table, moves automatically program controlled in X direction Furthermore, optionally available: - Automatic raw work piece feed with finished work piece return to the operator TPA control unit: CNC control with graphical user interface Parametric software with 3D modeling Necessary processing macros customized to you pre-installed

The machine is still in use and will be available from around 15 May. We are always happy to answer any questions you may have.

According to photos, weight estimated Auction-ID: A1-45666-11

Power 1,5 KW Pressure: 10 bar in good condition Auction-ID: A7-46406-3

BAZ Johnford FMC 850 for sale The machine is built in 1999 and can be viewed under chipboard. Enclosed is a type picture of the machine! Available in mid-June!

CNC processing center manufactured in 1997. This WEINIG / DIMTER Unicontrol 10 features a maximum workpiece length of 3,600 mm and a maximum workpiece height of 100 mm. It includes a powerful cross-cut saw with a spindle speed of up to 3,000 rpm and a tenoning spindle motor power of 15 kW. If you are looking to get high-quality CNC processing capabilities, consider the WEINIG / DIMTER Unicontrol 10 machine we have for sale. Contact us for further details.

Hard Drive WD Red Pro 3 TB NAS HDD

Offer 26003 Technical data: - Saw blade diameter up to 370 mm - Cutting range at 90° around 110 mm - Square 100 mm - Rectangle 280 x 40 mm - or 240 x 85 mm - at 45° around 110 mm - Square 100 mm - Rectangle 220 x 40 mm - Mitre adjustable Li + Re each 0 - 90 ° - 2 cutting speeds 13 + 26 m/min - Drive 380 V / 1.2 / 1.8 kW - Feed speed of the saw blade hydr. Infinitely variable - Coolant device - Space requirement approx. W 800 x H 1850 x D 1100 mm - Weight approx. 750 kg

Offer 24310 Technical data: - Manual saw blade feed - Workpiece covering in the machine vice - Saw blade diameter 315 mm - 2 cutting speeds 40 - 80 m/min - Cutting range at 90° around 110 mm - Rectangle 82 x 160 mm - Square 82 x 82 mm - mitred at 45° about 110 mm - Rectangle 80 x 120 mm - Square 82 x 82 mm - Drive 400 V / 1.4 / 1.9 kW - Coolant device - Space requirement approx. W 600 x H 1600 x D 750 mm - Weight approx. 300 kg

Line consisting of: Rex vacuumfiller Model: RVF 761 Serial number: 7611040927 Hopper: 250 litres Pump capacity: max. 6100 kg/hr Filling pressure: max. 70 bar Working hours: 19648 Power: 3 x 400V, 50Hz, 15kW Dimensions: 2320 x 1440 x 3035 mm Weight: 1100 kg DJM Food Processing coextrusion system Model: COEX 4 Serial number: N500003 Year of construction: 2019 Diaphragm: 4 pieces Capacity: up to 100 strokes/min. Product diameter: max. 60 mm Product temperature: -2 °C to +45 °C Belt width: 440 mm Belt length: 1920 mm Belt speed: 3 - 15 m/min. Power: 3 x 400V, 50Hz, 20kW Dimensions: 2030 x 1625 x 2281 mm Weight: 2500 kg

Hard Drive WD Red Pro 3 TB NAS HDD

Hard Drive WD Red Pro 3 TB NAS HDD

Hard Drive WD Red Pro 3 TB NAS HDD

Hard Drive WD Red Pro 3 TB NAS HDD

Efficient and powerful ride-on sweeper from Nilfisk, model SR1100. Ideal for quick and thorough cleaning of large surfaces. Robust, reliable and immediately usable for professional use! Auction-ID: A3-43525-20320

Cutting diameter 230 mm Cutting speed 35 - 70 m/min Cutting width 260 x 200 mm Saw blade length 2720 x 27 x 0.9 mm Total power requirement 1.1 kW Machine weight approx. 0.68 t Dimensions approx. 1.8 x 1.8 x 1.6 m Auction-ID: A7-46460-627

Equipment: 3-axis digital display. Pinole path has separate digi display. Automatic feed in X-axis and quill. Motorized Z-axis. Tapping device. Coolant system. Machine base. Collet set, SK tool holder. Other machine accessories in box. Drilling capacity in steel45 mm Quill stroke 125 mm Table adjustment transverse 560 mm Table adjustment longitudinal 230 mm Table clamping area 800 x 240 mm Spindle speeds 75 - 3200 rpm max. cutter diameter 80 mm Spindle holder ISO 30 max. distance between work table and spindle nose 460 mm Projection 230 mm Connection voltage 230 V Total power requirement 1.5 kW Machine weight approx. 580 kg Space requirements approx. 1.2 x 1.0 x 2.1 m Condition: never used / new (5) Auction-ID: A7-46460-554

Bench lathe 2-axis LCD digital display system. Longitudinal feed. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. Clamping plate. 4-way steel holder. Drip tray Hardened bed sheets. Emergency stop. Feed protection Set of wheels. Base cabinet is not included Suitable tools. Turning diameter over bed 250 mm Turning diameter over support 140 mm Turning length 550 mm Speed 50 - 2000 rpm Tip height 125 mm Spindle bore 26 mm Tailstock quill holder MK 2 MK Tailstock quill stroke 65 mm Connection voltage 230 V Total power requirement 1.1 kW Machine weight approx. 0.15 t Space requirements approx. 1.3 x 0.6 x 0.65 m Condition: never used / new (5) Auction-ID: A7-46460-408

wood chipper Engine: JCB-E460PE petrol engine Engine type: 4-stroke OHV, 1-cylinder Engine capacity: 457 cc Engine power: 15 hp Starting: Electric start and pull starter Drive: Belt Drive Chopping method: Flywheel system (disc system) Disc diameter: 600 mm Drive speed: 1800 rpm Blades: 2 chopping blades + 6 shredding blades Max. branch diameter: 120 mm Feed opening: 588 × 440 mm Input channel: 278 × 167 mm Ejection tube: 360° rotatable Safety: emergency stop Fuel: Petrol fuel tank: 6.5 litres engine oil: SAE 30 / 15W40 Oil capacity: 1100 ml chassis: mobile chassis Wheels: pneumatic tires Wheel diameter: 16 inches (400 mm) Towing device: ATV tie rod (not omitted) Noise level: 120 dB Dimensions (L × W × H): 2760 × 980 × 1730 mm Net weight: 260 kg Included: manual and tool kit Condition: unused, i ...