129,061 used machines on RESALE, but how to find them? Machine Search
Proficoater Hymmen PFC-S 1400 Painting system for the application of UV-curing lacquer systems with integrated roller troweling machine Conforms to EC Machinery Directive Coating: from above Operating side: left, Working height: 900 +/- 50 mm, Nominal width Application roll: 1,400 mm, Effective usable width: 1,300 mm, Delivery height: max. 100 mm, Feed rate: 6 - 30 m / min, drive control, Mains voltage: 400 V, 50 Hz, Protection class: IP 54, Power consumption: approx. 16 kW, Fuse: 63 A on site, Total length: approx. 5.660 mm, Total width: approx. 2,700 mm, Part speed: approx. 12 m / min in reversing mode, Approx. 8 m / min in the flow, Plates: wood panels, Plate length: min. 300 mm, Plate weight: max. 80 kg / m², Varnish: UV paints solvent-free 60 140 DIN4sec, 3 - 40 g / m² depending on the lacquer system and selected program, EX range: The application machine ELX-S is designed for cle ...
In Stockroom at the warehouse in Blomberg! The KR BM 600 is a profile spraying machine of the latest Kama generation. The machine is equipped with a wide cabin, a conveyor belt transport system with paint recovery and belt washer system. Automatic loading and unloading systems are available as an option. SPRAY ARMS, PART DETECTION 4 spray arms, adjustable in height, inclination and angle, are installed as standard. adjustable in height, inclination and angle. On these arms the 4 spraying can be used. By means of part recognition at the inlet of the spraying machine the individual spray guns are controlled. Optionally, additional guns and pumps can be installed or a version with a double booth can be selected. CONVEYOR AND BELT CLEANING SYSTEM WITH PAINT RECOVERY SYSTEM The paint that is sprayed onto the 600mm wide polyolefin conveyor belt is automatically squeegeed off and can be reus ...
- drie aangedreven rollen - de twee onderste rollen zijn verstelbaar Dia rolls: 117/227 mm Dia of die mandrel: 30 mm Rotationspeed: 20 rpm Motorpower: 2 HP Length : 900 mm Depth: 680 mm Height: 1360 mm Weight: 200 kg
Key data: 1047 KW, 1251 kVA, 10000 V
KKK Back Pressure Steam Turbine CFR 5 G5 Electricity generators from 1995, Turbine with AC generator and control system. 1 available. Inlet pressure 8.5 – 15 bar, outlet pressure 0.5 – 3 bar, 1,000 KWel x 1500 rpm, 10 KV/50 Hz. AC Generator: Leroy Somer LSA 52 VLS-4P, 1,251 KVA Manufacturer: KKK Model: CFR 5 G5 Type: Steam Back Pressure Serial number: 4 555 020 Power [KW]: 1047 Pressure inlet [bar]: 8.5 – 15 – Norm: 12 Temperature Input [°C]: 290 – 390 Pressure output [bar]: 0.5 – 3 – Norm: 2 Year of Make: 1995 Dimensions LxWxH [m]: 3.60 x 2.20 x 2.20 AC Generator LSA 52 VLS-4P Manufacturer: LSA Model No.: 52 VLS-4P Type: AC Synchronous Generator Serial Number: 162554-1 Power [KVA]: 1,251 Voltage [V]: 10,000 Frequency [Hz]: 50 Current [A]: 72 Speed [1/min]: 1500 Year of Make: 1995
Proportional directional control valve, R900967790, 4WREE 10 EA25-, Rexroth, as good as new Attention: This is an original product and not a replica from Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. As good as new! - has never been used and is as good as new, - Comes from a spare parts warehouse of a certified production company, Proportional directional control valve, R900967790, Rexroth, as good as new - 4WREE 10 EA25-23/G24K31/A1V 6 months warranty We give you a 6-month warranty for these goods from the date of invoice. In the event of a defect that is not the fault of the buyer, the goods can be returned. We will only refund the buyer the price of the product paid to us. Updating in the case of digital components is excluded. Liability for direct and indirect consequential damage is also excluded. Our terms and cond ...
Proportional directional control valve, R900939866, 4WREE 10 EA50-…., Rexroth, mint condition Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Mint condition! - never been used and is in mint condition, - Comes from a spare parts warehouse of a certified production facility, Proportional directional control valve, R900939866, Rexroth, as good as new - 4WREE 10 EA50-23/G24K31/A1V 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and c ...
Proportional pressure control valve, R901344934, ZDREE6VP4-….; Rexroth, mint condition Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Mint condition! - never been used and is in mint condition, - Comes from a spare parts warehouse of a certified production facility, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court location St. Pölten.
Proportional directional control valve, R900967790, 4WREE 10 EA25-…., Rexroth, used Top Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - is in very good condition and fully functional,- It is possible that this valve has never been used, but this cannot be guaranteed. It appears that the new replacement valve was stored in the production facility. Proportional directional control valve, R900967790, Rexroth,used Top - 4WREE 10 EA25-23/G24K31/A1V Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer maximum the produ ...
Control Heidenhain TNC 620 Travel X/Y/Z: 350 x 250 x 300 mm Spindle speed 12,000 min-1 Round and swivel table Tool magazine for 20 Wkz. ISO 30 Chip conveyor LANG Automation EcoCompact 10 Approx. 100 tool holders ISO 30
Extruder for the production of packaging chips built in 1994
Year: 2009 - technically efficient, ready to work – after full service - discs: 500 mm - working length: 3700 mm - PC control (Windows XP) - online access - vertical and horizontal pneumatic clamps - automatic disc guards - roller feeder - support for longer profiles
In-store baking oven with proofer Item condition: well-maintained, in working order Availability: immediately
Key data: 6 KW, 9 kVA, 380 V
Generator set Geko type: 9001 9 KVA Runs great and can be demonstrated before Type: 9001 ED-AA/SHBA (SEBA) Motor Briggs & Stratton 18 HP-V-Twin - Petrol Connection: 1x Schuko 230V 1x CEE 230V 32A 2Pol 1x CEE 380V 16A 5Pol Power: 9kVA Operating hours: 842 h Weight: approx. 124kg No warranty, no returns Input errors and errors excepted
Stock number: 4017 PROFILE BENDING MACHINE Manufacturer: Roundo , Type: R4 Machines NO.: 1735, Year of manufacture: 1977 Specifications: Angle steel 90x9 mm Flat steel 200 x 30 mm Frame steel upright 100 x 18 mm Round steel 60 mm Load by steel 40 Kg/mm2 30 cm3 Upper roller 275 mm Ø Shaft dia. 105 mm Square steel 55 x 55 mm T-steel 90x10 mm Total power 5.5 kW Length: 1500 mm, Height: 1400 mm, Width: 1400 mm, Weight: 2500 kg
Awea BM-850 vertical machining center Technical specifications Selca CNC Model CNC version S4040DH Tool holder iso 40 Spindle power 11 Kw Spindle Speed 12000 Number of tools 24 X-axis travel 850 mm Y-axis stroke 600 mm Z-axis travel 600 mm Fast feed rates linear axes X Y Z 24 m/min Table dimensions 1050x600 mm Table capacity 850 Kg High refrigerant pressure yes Pressure value 18 bar Screw chip conveyor Basic Information Code 33883A Level Machine Standard Brand Name: Awea Model BM-850 Year of construction 2010 Size and Weight Length 2,500 mm Width 2,200 mm Height 2,600 mm Weight 6500 Kg
Offer 25326 Technical data: - Saw blade diameter up to 400 mm - Cutting range at 90° around 130 mm - Square 120 m - Rectangle 300 x 40 - or 240 x 80 mm - at 45° about 130 m - Square 110 mm - Rectangle 245 x 40 mm - Mitre adjustable Li + Re each 0 - 90 ° - 2 Cutting speeds - Drive 400 V / 1.26 / 2.5 kW - Feed speed of the saw blade hydr. Infinitely variable - Coolant device - Space requirement approx. W 1100 x H 1980 x D 1210 mm - Weight approx. 950 kg - Feed + discharge roller conveyor with dimension stop 6000 mm
Inv. Num. : 8870 Type: VTC-200B Producer: MAZAK Created: 1999 Parameters: Control system: Mazatrol PC-Fusion CNC 640 M Work table length: 2820 mm Work table width: 655 mm Maximum table load (uniform): 800 kg X-axis travel: 1120 mm Y-axis travel: 510 mm Travel Z-axis: 510 mm Machine weight: 6000 kg Equipment: Tool probe Workpiece Probe IKZ Chip conveyor
Inv. Num. : 8871 Type: Emcomill E 1200 Producer: EMCO Created: 2011 Parameters: Control system: Fanuc Switch-on hours: 28317 h Operating hours: 12114 h Work table length: 1340 mm Work table width: 650 mm Maximum table load (uniform): 1500 kg X-axis travel: 1200 mm Y-axis travel: 610 mm Travel Z axis: 500 mm Machine height: 3060 mm Machine length: 3200 mm Machine width: 3350 mm Machine weight: 10000 kg 2025: New Z-axis motor Spindle overhaul
Offer 25455 Hydr . Flat profile and bar steel shears with notching device and hole punch Technical data: - Flat steel shears cut up to 300 x 15 mm - Profile steel shears - Cuts L-steel at 90° to 120 x 12 mm - Steel bar shears - Cuts round steel up to 40 mm - Square steel up to 35 mm - Notching device - with square notch. 100 x 42 x 10 mm - Hole punch - punching force 600 KN - With stop table - Projection 220 mm - Punches in steel up to 28 mm Ø in 15 mm - or 38 mm Ø in 11 mm - various punches + dies, - Drive 400 V / 4 kW - Space requirement approx. W 600 x H 1550 x D 1500 mm - Weight approx. 1300 kg
technically efficient, ready to work - after full service bar spacing: 100 mm dimensions: 265 x 265 cm height: 150 cm weight: 350 kg
2 pieces of diesel generators in parallel operation Engine Type: Caterpillar 3512HD Power each: 1875 kVA Total power: 3750 kVA Year: 2008 Operating hours: approx. 220 Cooling: Water Speed: 1500 1/min Voltage: 400/231 V, 50 Hz Tank: 2000 liters Generator: Caterpillar SR4B Type: Container Both power generators only ran in parallel in emergency power or trial operation.
Shear force 60 t Punching force 40 t Profile steel shears L- and T-irons at 90° 100 x 10 mm at 45° 65 x 8 mm Notching device with square notch for sheet metal up to 10 mm Flat steel shears for flat steel 380 x 8 mm or 150 x 14 mm Weight: approx. 1.5 t Dimensions: approx. 1.7 x 1.05 x 1.98 m Accessories - Electrical contact stop 3000 mm - Anchor table - Adjustable hold-down device - Tool package Validity of the security check until Feb. 2026
Year: 2018 technically efficient, ready to work – after full service hydropneumatic head feed with automatic profile height measurement automatic zeroing after the end of the work cycle double vertical and horizontal pneumatic clamps minimum internal pack dimension: 450 mm maximum internal pack dimension: 2740 mm
Offer 25481 Technical data: - Saw blade diameter up to 350 mm - Saw blade feed via hand lever - Largest opening width of the pneumatic vise 205 mm - Cutting range - at saw blade diameter 350 mm - at 90° around 120 mm - Square 110 mm - Flat up to 200 x 90 mm - or 140 x 110 mm - at 45° about 100 mm - flat 100 x 100 mm - Mitre adjustable - left up to 45° - right up to 45° - 30° - 2 saw blade speeds 17 + 34 1/min - Drive 400 V / 1.4 / 1.9 kW - Air connection 6 - 8 bar - Micro spray coolant device - Space requirement approx. W 850 x H 1750 x D 950 mm - Weight approx. 400 kg
General Manufacturer: Hermle Type: C 40 U Year of Make: 2005 Control: Heidenhain TNC 430 Travels: X 850 mm, Y 700 mm, Z 500 mm B swivel axis Working spindle Speed: 28,000 rpm Tool/movement Tool changer: 38-speed Tool holder: HSK63A Dimensions and weight Weight: 10,500 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included Spindle coolers IKZ high-pressure system 80 bar Blum Laser Measurement Workpiece probes Electric Handwheel HR410 Chip conveyor Oil mist extraction
Inv. Num. : 8880 Type: MCV 500 QUICK Producer: MAS Created: 2003 Parameters: Control System: FANUC Series 2ti-MB Work table length: 800 mm Work table width: 500 mm Maximum vertical spindle speed: 8000 1/min X-axis travel: 500 mm Y-axis travel: 500 mm Travel Z axis: 500 mm Machine height: 2550 mm Machine length: 2085 mm Machine width: 1900 mm Machine weight: 3800 kg
5-Axis Universal Machining Center DMG Mori ecoMill 50 Control: Heidenhain TNC 620 Year of Make: 2016 Travels: X-axis 500 mm Y-axis 450 mm Z-axis 400 mm B-axis °-5/+110 C-axis °360 Clamping surface rotary axis: Ø 630 x 500 mm Mount: SK 40 Tool Magazine: 32 Slots Speed: 12,000 rpm Accessories - Chip conveyors - 3D Probe Infrared - Table button
Robot Coupe R10 VV food processor unit. It has an 11.5 L all-stainless steel mixing tank with handles. It is a single phase 230V machine had light use (making a chopped date and desiccated coconut mix) It’s in great condition and works perfectly, the blades are in perfect condition.
Key data: 440 mm, 280 mm, 315 mm
CNC Machining Center MATRA KIRA KN40VS – FANUC 21-M Specifications (KN40VS) Machine Type: 2-Pallet Machining Center Control: FANUC 21-M Travel: X 440 mm / Y 280 mm / Z 315 mm Pallet size: 500 × 300 mm Tool changer: 12-speed Spindle speed: 200–4,500 rpm Drive power spindle: 7.5 kW Equipment / Condition Pallet changer (2-fold) Machine used, inspection/test run possible by arrangement
3 pcs proportional valves + control unit, R900948284 + VT-HNC100-2…, Rexroth, used Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, - The parts were removed from die-casting machines. The scope of delivery consists of: 3 used Rexroth proportional valves. It is possible that the valves function without any problems or that some may require refurbishment. The current market price of the new valve is approximately € 20,000. Our selling price is € 490 per unit. 1 used Rexroth control unit VT-HNC100-2-30/P-I-00/000. These control units are no longer available on the market, but are necessary for these valves. Our selling price is € 990. Applies to both items. Sale ...
Labeling machine for top and bottom, with a ZODIAC printer for the top labels.
Key data: 750 mm, 600 mm, 520 mm
Universal machining center Spindle speed up to 18,000 1/min; Rapid traverse 50 m/min; Tool magazine 32 tool positions HSK 63; Swivel table - table size 700 x 500 mm; Table load 350 kg; CNC control Heidenhain TNC 530; Chip conveyor; Coolant system
Vertical machining center Travel x/ y/ z = 1020/ 600/ 500 mm Table size 1250 x 600 mm max. workpiece weight 800 kg Tool magazine 32 Tool positions HSK 63 Rapid traverse 70 m/min CNC control Heidenhain iTNC 530 Chip conveyor Coolant system
Inv. Num. : 8902 Type: Vesta 1000 12K Producer: Hwacheon Created: 2016 Parameters: Control System: FANUC Series Oi-MF Hours: 15976 h Work table length: 1100 mm Work table width: 502 mm Spindle drive power: 11 kW Maximum spindle speed: 12000 1/min X-axis travel: 1000 mm Y-axis travel: 550 mm Travel Z axis: 500 mm Cone: BT40 Max. tool length: 300 mm Max. tool weight: 8 kg Max. tool diameter: 80/150 mm Rapid traverse X/Y/Z: 36/36/30 m/min Machine height: 2670 mm Machine length: 3335 mm Machine width: 2200 mm Machine weight: 6500 kg Equipment: Tool probe Workpiece Probe 4th axis TSUDAKOMA
De plaatdikte is afhankelijk van het profiel. dop: 0,5 gt; 1,5 mm 7 stations vermogen: 2,4 kW gewicht: 430 kg
We offer this used Sinico SIN-O-MATIC TOP 2000 saw and end processing machine, built in 2011. Model: SIN-O-MATIC TOP 2000 Type: TR110/2-350-CL-S CNC Serial Number: 1459 Year of manufacture: 10/2011 Weight: 7200 kg (plus magazine) Workpiece diameter: 110 mm Maximum workpiece length: 350 mm Installed power: 65 Max kW CNC control from NUM Automatic machine for cutting to length and machining the ends. Transfer machine with horizontal axis table for cutting and end processing of tubes and bars. Flexible and highly adaptable CNC machine. It guarantees high productivity, up to 2500 parts/hour, and is designed for the machining of small to large workpieces: bar diameters up to 110 mm, finished part lengths up to 350 mm. Maximum versatility in the processing of tubes and rods It is able to carry out the following machining operations Chamfering – Face Milling – Threading ...
Ovit Sirio TH120, thermal Processor
Year of manufacture 2005 Stitching, folding and cutting unit 304 QSM 3-side trim Shed display Marking device Delivery date: immediately Price on request. Worldwide delivery & installation.
1 gebr. Kantenbearbeitungsstraße IMA COMBIMA / K/ II/ R75 / 1075 / V / R3 Bj. 1996 Bestehend aus: - Doppelseitige IMA COMBIMA für die Längsbearbeitung: Doppelzerspaner 2 x Fräsen Verleimteil mit Granulat-Vorschmelzer 6-fach Rollen-Magazin für das Kantenmaterial 1 x Hauptandruck- und 4 x Nachpressrolle Kappaggregat Bündfräsen 2 x Feinfräsen Profilziehklinge Flächenziehklinge Schwabbelaggregat Glätteaggregat - Drehvorrichtung von läng auf quer - Doppelseitige IMA COMBIMA für Querbearbeitung Schutzfräsen Doppelzerspannen Nutfräsaggregat Verleimteil mit Granulat-Vorschmelzer 6-fach Rollen-Magazin für das Kantenmaterial 1 x Hauptandruck- und 4 x Nachpressrolle Kappen am Oberdruck (Nachrüstung auf aktuelles Modell) Bündigfräsen Feinfräsen 2 x MFA Fräsen Nutfräsaggregat Profilziehklinge Flächenziehklinge Kopierschwabbeln (4 Moto ...
Inv. Num. : 8906 Type: MV 154 APC E 12B Producer: Quaser Created: 2012 Parameters: Control system: FANUC Oi-MD Work table length: 800 mm Work table width: 500 mm Maximum table load (even): 250 kg Spindle drive power: 11/18.5 kW Minimum vertical spindle speed: 50 1/min Maximum vertical spindle speed: 12000 1/min X-axis travel: 700 mm Y-axis travel: 500 mm Travel Z-axis: 560 mm Cone: ISO 40 Machine height: 3080 mm Machine length: 4250 mm Machine width: 2850 mm Machine weight: 8500 kg Equipment: Chip conveyor Pallet Changer Workpiece Probe Tool probe
Temperature-controlled processing tanks are vital in various industries, including food, pharmaceuticals, and chemical manufacturing, where precise temperature management is essential for product quality and safety. Here’s a detailed overview of temperature-controlled processing tanks:, What is a Temperature-Controlled Processing Tank?, A temperature-controlled processing tank is a vessel designed to maintain a specific temperature range during the processing of materials. These tanks are equipped with heat exchange systems, temperature sensors, and control mechanisms that ensure the contents remain at the desired temperature throughout the processing cycle., Key Features, - Heating and Cooling Systems:, - Heaters: Can be electric or steam-based to raise the temperature of the contents., - Chillers: Usually water or glycol-based cooling systems to lower the temperature., - Insulation: ...
General Overview, Pasteurising, cooling, chilling, curing, emulsifying, reconstituting, incubating and mixing are all processes essential in the food processing laboratory. The Armfield Multi-Purpose Processing Vessel is capable of carrying out all of these functions as a self-contained,mobile unit. Its mobility allows it to be positioned in the laboratory adjacent to other equipment that it may be acting as a service to, and also makes it easily stowable. The hygienically designed jacketed vessel has a working capacity of between 10 and 15 litres which allows experimentation and demonstrations without the need for large quantities of raw materials. An electrical heating element positioned at the base of the jacket heats water in the jacket which in turn heats the contents of the vessel. This method gives a gentle, transfer of heat to ingredients that are often heat sensitive and local h ...
Key data: 1100 mm, 600 mm, 600 mm
Vertical CNC Machining Center Manufacturer: Kaast Type V11L Year of construction 2022 Control Siemens 828 Shop Mill Travel X/Y/Z 1100/600/600mm 24 Way Tool Changer Tool holder SK40 max. speed 10,000 rpm Measuring System Linear Glass Scales Chip conveyor Tool Breakage Control Air and coolant cooling Machine is in a used good condition. For more information, I am always available at 0177 8957069. Machine will be available from March 2026.
Height=1.63 m, Overall length= 0.96 m, Overall width= 1.06 m, Net weight= 329 kg,
HP Jet Fusion 5200 â Industrial MJF production system including extensive accessories, For sale is a HP Jet Fusion 5200, an industrial 3D printing system based on the Multi Jet Fusion (MJF)-Technology designed for the economical serial production of plastic parts with high dimensional accuracy and mechanical durability., The system will be supplied including Post Processing Station, two Build Units, two powder barrels as well as a pallet truck offered and thereby presents a complete, production-ready system for industrial use., ---------------------------------------------------------------, System components included in the delivery:, - HP Jet Fusion 5200 printing unit, - HP Post Processing Station (powder removal & processing), - 2 Ã Build Units (for parallel production / reduced downtime), - 2 Ã powder barrels, - 1 Ã transport forklift for build units and material handli ...
This 3-axis Weeke Optimat BHP Vantage 24M was manufactured in 2011. A robust CNC processing center, it offers precision and efficiency for diverse machining tasks. Consider the opportunity to buy this Weeke Optimat BHP Vantage 24M CNC processing center. Contact us for more information.
This Netstal EVOS 5500-2900 Speed was manufactured in 2013. Ideal for high-speed plastic processing, it ensures efficient operations with minimal downtime. A robust choice for your production needs. Contact us for more information.
An insulated process vessel is available. Temperature min./max.: -10°C/143°C, volume: 2491L, operating pressure range: -1bar/3bar, test pressure: 5.6bar. An on-site inspection is possible.
maximum number of results exceeded
please refine your search
