134,295 used machines on RESALE, but how to find them? Machine Search
Protective cover for framing curly parts on the ring etc. This protective device is often recommended by the BG. Maximum fraeser diameter 160mm With start-up ring, brushes and brake wedge for the start-up bearing Obviously hasn't been used much before. The machine can be demonstrated by appointment with us on site. We only offer machines that are ready for preparation in our warehouse, see "further offers from this supplier".
Collator Year ca. 1988 20 Stations Collator, with Stiching Unit and Trimmer
Folding and Inserting Machine: speed: upto 4.000 per hour, maximum monthly performance: 70.000, maximum annual output: 600.000, power required: 230 V, noise level:
round material: 30 x 1 mm square material: 30 x 30 x 1 mm : 16 mm : 30 x 10 mm speeds: 9 U/min total power requirement: 1,1 kW weight of the machine ca.: 0,32 t dimensions of the machine ca.: 0,82 x 0,60 x 1,26 m Electric roller profile with - 5 set of rollers 2x 20mm and 30mm for round material, 1x for flat material 1x for square material 1x for? - footswitch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
End milling machine GRAULE AKF 6/250 Single head saw GRAULE ZS 170N Copy router MECAL FR 811 Corner crimper WEGOMA EV 175
The machine is in good technical condition, a test run is possible by prior arrangement. OKUMA 5-axis vertical machining center MU-400VII with OSP-P300M-H – Tool magazine for 48 tools, BT40 (or Big Plus) – Tool breakage detection incl. automatic length measurement – Preparation for the function of automatic zero point shift (incl. software) – Collision avoidance system for 4-/5-axis milling centers – Coolant pump 0.8 kW instead of the standard version 0.25 kW – Flush cooling – Function for automatic zero point displacement incl. workpiece measurement, Renishaw OMP60 probe – Cutting edge control for 5-axis machining – Super NURBS Type A for 5-axis centers –Conveyor
Press (n°1) Upstroking Manufacturer: Agila Closing force: 850 Ton Year 1997 hydraulic Steam Platens : 3 2 cavities (250 mm opening) Size heating platens: 1100 x 1400 x 76 mm Diam. piston 650 mm Hydraulic pressure: max. 250 BAR Hydraulic tank: 500 L Complete manual included Size press 2400 x 1400 x 4200 mm (LWH) Weight +/- 23.000 kg
I sell a tenon machine for parallel milling, grooves for pallet tape etc. WACO T2-SL Year of construction 1984. Groove width 30mm. Motor 3,3kW Made in Germany. Available the same. With dokumentazion.
Hydraulic 20 T single-stand production press for the production of lightweight concrete parts Here are the technical data of the offered machine: If the press does not exactly meet your requirements profile, please request an individual offer exactly according to your wishes with one click: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your wishes at surprisingly low prices! Technical data + information: a) Closing speed up to 10 mm/sec b) Opening speed up to 20 mm/sec c) Open maximum height 300 mm d) Pressing speed 4 – 10 mm/sec. ( adjustable via rotary knob ) e) Mould size 600x800 mm f) Plunger size950x600 mm g) Manual lubrication( via lubrication nipples ) h) Pressure setting from 5 T to 20 ( adjustable via rotary knob ) i) Travel 300 mm j) Construction, commissioning, instruction against separate calculation ...
Used polypropylene film production line from GAP s.r.I. Model: GAP K – 2200 /90-60-60-60-60. New 2007. The line is specialized in the production of five-layer thermoshrinkable bio-oriented Double Bubble. The line includes cross-link film production technology. Complete line - connected with the possibility of testing. Technical data: - Machine dimensions: structural tower height 18,000 mm, - Capacity: 300 kg/h, - Electrical requirements: 400 V (3F+N+PE) 50 Hz 790 A /230 V 16 A /, - Electricity consumption: Max. electricity consumption 300 kW, - Air consumption: 6 bar 5450/min, - Voltage: 400 V 50 Hz 790 A / 230 V 16 A /, - Frequency: 50 Hz. Full documentation (electrical diagrams, manuals, instructions).
Multigraf MCM-48 creasing and perforating machine Specifications MCM-48: Manual of the material feed Minimum format, mm 80x100 Maximum format, mm 480x500 Material density, g/m2 80-500 Dimensions, mm: 1100 x 605 x 300 Power supply: 220 V
10,000 litres of above-ground containers for water or plant processes
LS8 2500 knotted mesh production machine was built in 2016 in Poland by Maszyny S.C. The machine is used in the efficient production of durable and damage-resistant L-, M-, S- and SL-type mesh. The entire production process, from wire feeding to net braiding, is performed fully automatically. The fixed knot fence production line weighs 2600 kg. Technical specifications of the LS8 2500 knotted mesh production machine - type of produced net : L, M, S, SL - maximum height of the produced net: 225 cm - horizontal wires spacing: 15 or 30 cm - number of horizontal wires: 26 pcs. - edge wires diameter range: 1.8-3 mm - inner wires diameter range: 1.5-2.5 mm - edge wires maximum stress: Rm=1200 MPa - horizontal wires maximum stress: Rm=450 or 1150-1200 MPa - vertical wires maximum stress: Rm=450-500 MPa - power: 11 kW - pneumatic pressure: 0.6 MPa - power supply: 3x 400 V; 50 Hz ...
LS6/4 knotted mesh production machine was built in 2006 in Poland by Maszyny S.C. The machine enables the efficient production of durable and damage-resistant L-, M-, S- and SL-type mesh. The entire production process, from wire feeding to net braiding, is performed fully automatically. Technical specifications of the LS6/4 fixed knot fence production line - type of produced net: L, M, S, SL - maximum height of the produced net: 200 cm - vertical wires spacing: 15 or 30 cm - number of horizontal wires: 25 pcs. - edge wires diameter range: 1.8-3 mm - inner wires diameter range: 1.5-2.5 mm - edge wires maximum stress: Rm=1200 MPa - horizontal wires maximum stress: Rm=450 or 1150-1200 MPa - vertical wires maximum stress: Rm=450-500 MPa
With the device, upper and lower parts were previously joined together and pressed. Components are Kuka Scara KRC2sr Robot BJ 2010 Pneumatic control Electrical control with frequency converter 4 conveyor belts Description Robotor Type KR 5 scara R350 Working space volume KR 5 scara R550-Z320: 0.264 m3 Repeatability (ISO 9283) KR 5 scara R350: ±0.015 mm Reference point Working space Intersection of axes 3 and 4 Weight approx. 20 kg Datalatt Robot
Hilco Industrial is the selected partner by Hyundai RB to facilitate the sale of new LSAW Welded Pipe complete production lines as well as individual machinery, designed and manufactured by Hyundai RB (South Korea). Based on excellent production capacity achieved over more than 25 years’ experience, Hyundai RB developed its own S.A.W. pipe production lines featuring JCO Press Bending. LSAW Welded Pipe Production Line Main Equipment and features: Shot Blasting – Max 6m/min x width 4,800 Edge milling – Φ800 cutter type x 130kw – Quick tool changing – Max. milling speed: 6m/min. – Automatic calculation of number of milling – Automatic width checking Edge-Bending (Pre-Bending) – 1,500 ton/8t ~60t/6~13.5m – Quick size changing – Max. bending thick.: 60mm JCO Press Bending – 6,000/8,000/10,000 ton (max.13.5M) – PLC with CNC (Recipe memory) ...
Key data: 200 mm, 400 , 360
Profile Bending machine Model AR360 -Year 2004 MG brand made in Italy OUTPUT SHAFTS 360 MM Capacity as per the original bending chart here enclosed Configuration installed with the machine -Pyramid dual pinch side rolls independent hydraulic positioning bending and pre-bending performance -The 3 shafts driven with hydraulic motor and gear unit individual on each roll -Synchronized speed automatic hydraulic control between the 3 rotating shafts -hydraulic traction tool to roll HEB_INP_UPN bending on hard-side. -Lateral correctors left/right hydraulic operated in 3 directions Tooling with the machine -Set of rollers for pipe: 6” and 12” -Set of rollers with adjustable opening width up to 400 mm ( for all the profiles bending easy way and hard way ) -Set of rings to increase the rollers opening width up to 500 mm ( for all the symmetric profiles b ...
Key data: 200 mm, 300 , 200
Profile bending roll used equipment hydraulic model AR200 year 2008 make MG Italy Capacity bending chart photo in enclosed -Technical data: Output shafts size 200 mm -Machine complete with set of rollers adjustable for the various shape of profiles. -Traction tool hydraulic operated for the HEB-beam - IPE - UNP bending the hard side. -Lateral correctors left and right side hydraulic operated in 3 direction. -Included additional set of rolls for pipe 6" inches -Machine with 3 rolls driven system with individual hydraulic motor and axial gear-unit on each shaft. -The 3 shafts working on bearings, heavy duty type with sealed lubrication. -Centralized control panel movable on wheels with all electric commands. -Dual rolling speed up to 5 mtr/min with automatic balancing system between the 3 rolls. -Safety devices in compliance with European regulation. CE mark. - ...
Keyence XG-X2500 Image Processing Controller, Image Processing Controller XG-X Manufacturer: KeyenceManufacturer part: XG-X2500Type: Image processing controller, compatible with 5 megapixel camerasManufacturing country: Japan Item condition: This article comes from a company dissolution of one of the largest automotive parts suppliers in Germany and was stored there in paternosters, so some original packaging is missing and some articles have traces in stock. PSH2R3E19-7
Ekato Unimix Vacuum Processing System SRT 50 Order# 4808/2, Series# 70888. Year of manufacture 2004 Description • GMP compliant • EKATO PARAVISC agitator with EKATO UNIMIX scraper system Power 3 Kw, 5.2 Kw at 87 Hz Speed 21-121 rpm • Patented homogenizer EKATO UNIMIX S-JET, located at the lowest point of the container, for internal and external homogenization Power 5.5 kW, 9.5 Kw at 87 Hz Speed 1,000 – 4,800 rpm • Lid lifting device can be swivelled • Integrated CIP cleaning system • Integrated heating/cooling system Electric heating 12 Kw Control Siemens S7 with OP 17 Pressure and vacuum resistant with integrated vacuum system Product space: Capacity 85 litres / 50 l usable volume, Pressure -1/2 bar, Temperature 10/152 °C, Thermal system / double jacket: Capacity 11 l Pressure -1/+4 bar, Temperature 10/152 °C, Complete document ...
Konica Minolta development machine (wet) SRX-101 A • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!
Technical data of the CS Sigma profile: Manufacturer: SSI Schäfer Type designation: CS 300-3,0 Included in delivery: 01x CS Sigma Profile, II Choice Material color: sendzimir galvanized Total length: approx. 2,550 mm CS-Sigma profile: approx. 300x75x15 mm Material thickness: approx. 3.00 mm
Konica Minolta development machine (wet) SRX-101 A • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!
Technical data of the CS Sigma profile: Manufacturer: Stow Type: MSNSBG 350/2.0 S 350 GD Included in delivery: 01x CS Sigma profile, used Material colour: sendz. galvanized Total length: approx. 4,450 mm CS-Sigma profile: approx. 350 x 85 x 25 x 12 mm Material thickness: approx. 2.00 mm
Technical data of the CS Sigma profile: Manufacturer: Stow Type: MSNSBG 350/2.0 S 350 GD Included in delivery: 01x CS Sigma profile, used Material colour: sendz. galvanized Total length: approx. 5,500 mm CS-Sigma profile: approx. 350 x 85 x 25 x 12 mm Material thickness: approx. 2.00 mm
Technical data of the CS Sigma profile: Manufacturer: Stow Type: MSNSBG 350/2.0 S 350 GD Included in delivery: 01x CS Sigma profile, used Material colour: sendz. galvanized Total length: approx. 5,600 mm CS-Sigma profile: approx. 350 x 85 x 25 x 12 mm Material thickness: approx. 2.00 mm
AMOB MAH 40/3 CNC 3-roll bending machine was built in 2021 in Portugal by AMOB Group. The machine, designed for bending tubes and profiles, ensures the highest precision and repeatability of the produced parts. The machining process is performed by three hardened rollers, of which the upper roller has hydraulic adjustment. Each of these is driven by a reliable, high-power motor, which is located inside a fully welded body. This solution enables bending of even the most complex shapes both vertically and horizontally. All this is complemented by an advanced CNC control with memory for numerous programmes. The MAH 40/3 CNC tube and profile bending machine weighs 540 kg. Technical specifications of the AMOB MAH 40/3 CNC bending machine - control panel with CNC control - number of rollers: 3 - roller diameter: 148 mm - roller rotational speed: 12 rpm - number of shafts: 2 - shaft di ...
Available in stock 5 x Used Capstone Smart Proportional Valves. We have the following units available: - 3 x SPV Assy P/N 503044-200 complete with gaseous fuel valve P/N 506617-100 (Op. Press. 50 PSIG / Proof Press. 3500 PSIG); - 1 x SPV 25 24VOLTS P/N 511978-100R complete with gaseous fuel valve (Op. Press. 0-100 PSIG); - 1 x GSPV 12VOLTSD P/N 509736-100 complete with gaseous fuel valve (Op. Press. 75 PSIG / Proof Press 3500 PSIG): The unit are used but are in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.
Shrink Wrap, Front shuttle feeder, Rotary side feeder, Friction feeder, Shrink tunnel, Maximum Speed: 85 cycles per minute, Length: 85 to 395 mm, Width: 85 to 300 mm, Height: 2 to 70 mm
Scissors for reinforcing steel or bars max 32mm
Lid Maho DMC-200 U serie 1512 5-axis CNC universal machining center, simultaneous Control: Heidenhain iTNC 530 Table size: 1600x1400 mm Table load: 3500 kg Number of pallets: 2 x Maximum workpiece diameter x height: 1950x1100 mm Travel X-axis: 1800 mm Travel Y-axis: 2000 mm Travel Z-axis: 1100 mm C-axis table rotation: 360° B-axis travel: -7/187° Spindle speed: 18000 1/min Spindle cone: HSK-A63 Spindle motor: 28/19 kW Magazine capacity: 120 Required footprint: 11200x12300 mm Height: 4375 mm Weight: 58000 kg For any questions about the machine, as well as a scheduling for the inspection, we ask you to contact us by phone or e-mail.
HUNKELER POST-PROCESSING SYSTEM (unwinding, punching, turning, rewinding) The line consists of: Position 1: UNWINDER HUNKELER UW4 G 7119 (M. No.: 659595 // Age: 2001) Position 2: CROSS and LENGTH CUTTER HUNKELER AM 520-W 7150 (M.No.: 1509697 // Age: 2004) Position 3: TRANSFER STATION HUNKELER PU 520-W 7150 (M.No.: 2010062 // Age: 2008) Position 4: PUNCHING & PERFORATING UNIT HUNKELER DM 520-W 7152 (M.No.: 1509697 // Age: 2004) Position 5: TURNER HUNKELER WM 520-W (M.No.: 1509697 // Age: 2004) Position 6: CUTTER (TRANSVERSE and LENGTHWISE)HUNKELER CU 520-W 7154 (M.No.: 1509697 // Age: 2004) Position 7: CRISS CROSS DELIVERY ERTEC STSC-2 (S.No.: 34 // Age: 2008) Position 7.1: Brand new (never used) FOLDING UNIT FS4 7127 (M.No.: 1509697 // Age: 2004), can be used instead of the display Position 8: CRANE
General: Year of construction 2013 Control Fanuc Series 0i-MD Travel X 703 mm Y 603 mm Z 503 mm Working spindle 12,000 rpm Tool changer 40-fold Tool holder DIN40 Specifications: Table swivel +31.1° / -121.7° Table rotatable 360° Other equipment and accessories included: Preparation 3D probe
travel -x axis: 2x 750 mm travel -y axis: 500 mm travel -z axis: 600 mm control: Siemens 840 D turning speeds: 30 - 6.000 U/min tool taper: SK 40 numbers of positions in the tool changer: 22 surface area: 2x (1.000 x 500) mm Dimensions (L x W x H): 4.100 x 2.300 x 2.600 mm Double-place machining center (shuttle operation) | AXA - DBZ Additional equipment: The machine comes with a 4th axis on each side processing in tack setting. The machine is in very good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
PVS -Micro-Cut or emulsifiers. Formerly called Kolidmühle For shredding various products Production of emulsions Pastes Sauces Soups and various other products Capacity up to 150 litres Motor power 15 KW
Key data: 762 mm, 460 mm, 460 mm
Vertical machining center Okuma MB-46UAE Year of Make: 2004 Control OSP U100M Machinery ▪ Spindle – speed 8000 rpm. ▪ High-speed machining (Hi-Cut) ▪ Spindle load monitor (load monitoring) ▪ Thread milling (Herical-Cut) ▪ Workpiece zero points 50 pieces ▪ 200 Tool Corrections ▪ Manuals available (documentation) ▪ Tool changer with 32 positions ▪ Internal coolant supply Technical details ▪ Travel X-axis (column right-left): 762 mm ▪ Travel Z-axis: (table forward-backward): 460 mm ▪ Y-axis travel (spindle up-down): 460 mm ▪ Distance table surface to spindle nose: 150~610 mm Table ▪ Table size: 1000 x 460 mm ▪ Distance from the floor to the table surface: 800 mm ▪ Max. load capacity: 700 kg Spindle ▪ Spindle speed: 8,000 rpm ▪ Number of gears: infinitely variable ▪ Front bearing diameter: 70 mm ▪ Spindle: 11/7.5 kW ...
Ex proofed compressed air diaphragm pump, DH25-FA-1NN-M, DEPA, used Top Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used - Excellent condition The part was purchased from a company's spare parts warehouse and is in almost new condition. Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updating in case of digital components. Also excluded is the liability for direct and indirect consequential damages. Our terms and conditions apply, see our we ...
Power: 850 kVA Fuel: Diesel Frequency: 50 Hz Voltage: 400/231 volts Operating hours: 75 40 ft container Control cabinet incl. wiring diagrams 750 liter tank No exhaust Subject to prior sale - errors possible Internal reference number: E-1156
Postforming machine in cycle Brandt type PF 20/31 Specifications: • Working length max. (mm): 3100 • Profile height max. (mm): 200
Garant Oil Cabinet 145x72x75cm Execution: Stable sheet steel construction with reinforced hinged doors, lockable by push handle with pin cylinder lock. The cabinet body is equipped with an individual pull-out protection. Due to the individual pull-out protection, only 1 pull-out shelf can be opened at a time. The cabinet is thus largely secured against tipping. Mounting of pull-out shelves and drawers in 25 mm increments. Oil cabinet equipped with plastic oil canisters Drawers/pull-out shelf Load capacity: 200 kg Drawer extension (partial/full extension): 100 % Drawer pull-out: Pull-out lock Height adjustment in grid: 25 mm Pin cylinder lock: modular insert HxWxD=145x72x75cm without key Item condition used RRP 3240,- € You can find more control cabinets - new and used - in our shop! International shipping costs on request!
Key data: 825 , 975 , 400
Steam turbine Generator CCC CFR 3 G5 780 KWe x 1,500 rpm 50 Hz 400 V Turbine backpressure Manufacturer KKK Model CFR 3 G5 P drive [KW] 780 Vapor pressure [bar] 39 - 48 / 43 norm Exhaust pressure [bar] 7 - 9 / 7,85 norm Generator Manufacturer AVK Model DKBN 100M/1100-4 P Generator [KVA] 975 Revolutions [per min] 1,500 Voltage [V] 400 Current [A] 1,407 Scope of delivery: The genset consists of the turbine and the generator. Technical documentation: available Spare parts / tools: not available The genset was dismantled in a working condition Sale takes place "as is" or after prior inspection on request, FCA free.
IZAN MAKINA IZFORM IZ5 roll forming line was built in 2019 in Turkey by İzan Makina – İmalat İnşaat İç ve Dış Ticaret Limited Şirketi. This line, distinguished by the use of the state-of-the-art technology available on the market, is designed for frame constructions. Its extensive machining capabilities allow for the precise, fully automatic forming of C- and U-type cold-formed profiles of various dimensions. These elements are used, among others, in partition walls and bathroom modules. The IZAN MAKINA IZFORM IZ5 profiling machine is offered with extensive equipment, including advanced BIM software and a sheet metal decoiler with a maximum capacity of 3 tonnes. The IZAN MAKINA IZ5 rool forming machine is currently configured for the production of C75x1.2mm and C100x1.2mm profiles. The production cycle is performed by means of a reliable tool head with the following machini ...
2 identical diesel gensets available MWM TD602V16 AvK generator with 700 kVA Operating hours approx. 1200 per unit Incl.: Radiator Silencer Cabinets Technical documentation Disassembled and immediately available Subject to prior sale - errors possible Internal reference number: E-1159
maximum number of results exceeded
please refine your search
