134,293 used machines on RESALE, but how to find them? Machine Search
Table size 2400 x 810 mm Feed speed 1 - 10000 mm/min Headstock travel 810 mm (Z-axis) Height of the machine 4000 mm Pull bolts MAS 403-P40T-I Table longitudinal displacement 2000 mm (X-axis) Table Transverse Displacement 810 mm (Y-axis) Spindle front face to table top 100 - 910 mm Distance from the floor to the table 1200 mm Distance between spindle center and column front 825 mm T - Slot No. 5 T - Slot Size 18 mm T - Slot Pitch 150 Max. load on the table 2500 kg Spindle cone BT-40 Hourly spindle speed 6000 rpm Footprint (L x W) 5400 x 3450 mm Weight of the basic machine 17000 kg Total connected load 50 kVA (basic standard machine), 60 kVA (basic standard machine with high-power spindle)
round bar steel: 50 mm square edge steel: 40 x 40 mm L-beam: 140 x 13 mm Punch power: 900 kN hole punching press: throat: 510 mm hole punching press: max. length of stroke: 29 mm hole punching press: capacity (dia. x thick.): 31 x 20 mm notching: l + T material: 80 x 14 mm no. of strokes: 40 / 45 Hub/min total power requirement: 4 kW weight of the machine ca.: 3,7 t dimensions: 2,1 x 0,7 x 2,12 m Accessories: various punches and dies The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Hyundai RB Onsan Factory, located at Ulsan in South Korea produces welded pipes by means of LSAW – Longitudinal Submerged Arc Welding process. The line is offered complete, featuring advanced HAEUSLER (Switzerland) core equipment. This facility is capable of producing welded pipes with the following specifications: Diameter: 22 to 80 inches Thickness: 6.4 to 25.4 mm Length: 6,000 to 12,200 mm The production line is equipped with a comprehensive suite of machinery altogether ensuring seamless and efficient production of LSAW pipes, including: • Plate edge milling • 3-roll bending • Post bending • Tack welding • Inside welding • Outside welding • Copander • End facing • Pipe inside washing • Hydrostatic tester • X-ray • Semi-correction • Pipe roll conveyor with skid system
Qty. 1 Second-hand full automatic mat and shine anodising coating line Mfc.: CISART Built: 2013 Stopped: Capacity: 1,800,000 pieces of profiles per annum Maximum Part Length: 3 m Requested area: approx. 630 m² Operators: 4 - 6 Estimated Full Power Consumption: 960 kW +/- 10% Voltage: 415 V, 50 Hz, 3 ph. Heat Consumption Max.: 500,000 Kcal/H +/- 10 % Water Consumption: 3 m³/h Water Consumption (TAP) by Customer: 10 m³/h Air Consumption: 1 m³/h Heating System: Electricity & Gas Acid Recovery System: 3 kg/h CHILLER 400,000 + 160,000 kCal/hr 40 °C Max. Ext. Temp. Water cooling range: 9-14 °C 190 + 80 kW Dozing System Quantity: 8 Eye & Body Wash Quantity: 2 Qty. 49 Tanks, 3.5 x 1.1 x 3.0 m – L x W x H Weight: 10 ton each Tank made of 2,5 mm thick AISI304 sheets
: 50 (500) mm : 45 (500) mm L-beam: 80 x 80 x 8 (800) mm T - beam - web outwards: 80 x 9 (800) mm Axis diameter: 60 mm work speed: 5,0 m/min Tool diameter: 195 mm total power requirement: 3 kW weight of the machine ca.: 1,0 t dimensions of the machine ca.: 1,2 x 0,9 x 1,2 m Profile bending machine with: - Foot pedal right / left - Recording: wave 50mm - with digital display - hardened special steel shafts - 1 set of standard rollers - Lower rollers are driven - Upper roll up and down hydraulically deliverable - Horizontal and vertical operation - Engine with braking device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inv. Num. : 5552 Type: BMC 24 SSM Producer: HURCO Created: 2004 Parameters: Control system: ULTIMAX Work table length: 760 mm Work table width: 400 mm Spindle drive power: 7.5 kW Tool magazine: 24 pieces Speed: 80-8000 1/min Travel X-axis: 610 mm Travel Y-axis: 405 mm Travel Z-axis: 505 mm Cone: SK40 Machine height: 2650 mm Machine length: 2140 mm Machine width: 2100 mm Machine weight: 4200 kg
Specifications: 2 castors hydraulically adjustable 3 rollers driven Resistance torque: 80 cm³ Shaft diameter: 100 mm Roll diameter: 315 mm lateral hydr. Controlled arm correctors left and right CE. Mark Bending capacity square: 120 x 60 x 5 mm Bending capacity flat steel: 130 x 25 mm Bending capacity tube: 114.3 x 6 mm Bending power angle: 100 x 10 mm Round steel: 80 mm Motor power: 11 kW Control panel with digital display Dimensions (length x width x height): approx. 1750 x 1850 x 1650 mm Weight: approx. 3.6 tons Accessories: Various bending rollers Condition: we will still carry out a complete service on the machine The seller is not liable for typographical or data transmission errors. The machine is appropriate for its age in terms of appearance, technology and wear; used machines are sold without any warranty.
x-travel: 630 mm y-travel: 560 mm z-travel: 560 mm Control: Heidenhain TNC 430 total power requirement: 26 kW weight of the machine ca.: 6500 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
angle steel/side length: unbkt mm double T-iron on the x-axis: unbkt. mm U-iron on the x-axis: unbkt. mm total power requirement: 37 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 2900x2300x2150 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
angle steel/side length: siehe TD mm double T-iron on the x-axis: siehe TD mm U-iron on the x-axis: siehe TD mm total power requirement: 15 kW weight of the machine ca.: 4,6 t dimensions of the machine ca.: 1850 x 1550 x 1685mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Condition: well-maintained, in working order Availability: immediately Rated power: 1 kVA Rated current: 3 A Short-circuit current: 6 kVA Weight 250 kg Product stackers for hand packing stations and semi-automatic packaging processes The SERVOFEED PF200 product stacker is a compact, stand-alone stacking aid and supports production personnel in manual semi-automatic packaging tasks or in the pre-packaging of products. The products are taken over in 1 lane, product stacks of the same or different height, e.g. stack height 6-8-6-8 packs, are formed and can be further processed by hand. Application The classic area of application of the SERVOFEED PF200 is line separation, e.g. after a thermoforming machine, on control devices, e.g. scales or metal detectors. The resulting product stacks can then be manually inserted into E2 crates or cardboard boxes. The stand-alone pac ...
angle steel/side length: siehe TD mm double T-iron on the x-axis: siehe TD mm U-iron on the x-axis: siehe TD mm total power requirement: kW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 1160 x 1000 x 1175mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
angle steel/side length: unbkt mm double T-iron on the x-axis: unbkt mm U-iron on the x-axis: unbkt. mm total power requirement: 77 kW weight of the machine ca.: 45 t dimensions of the machine ca.: 6000x5000x3500 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
angle steel/side length: unbkt mm double T-iron on the x-axis: unbkt mm U-iron on the x-axis: unbkt. mm total power requirement: 90 kW weight of the machine ca.: 55 t dimensions of the machine ca.: 6500x5300x3750 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
angle steel/side length: unbkt, mm double T-iron on the x-axis: unbkt. mm U-iron on the x-axis: unbkt. mm total power requirement: 11 kW weight of the machine ca.: 3,36 t dimensions of the machine ca.: 1175x1340x1650 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
angle steel/side length: unbkt. mm double T-iron on the x-axis: unbkt. mm U-iron on the x-axis: unbkt. mm total power requirement: 55+15 kW weight of the machine ca.: 24 t dimensions of the machine ca.: 3850x3050x82800 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Resin production plant. Capapcity 1200 tons per month. Plant can produce acrylic resins, alahide resins, poliuerethane resins on buthyl octate base, acetone base, and xylane base. Plant can produce 55-60% resin concentrate wchich acan later be diluted in another factory. Plant has 3 main pressure reactors each 10 ton of batch. Plant has a storage tanks 160000 L tanks. Plant is build in Atex execution. More information available upon request. Advise on resin production technology, recepies and technological advise is possible on separate agreement and price. Below you can find a photo gallery of the factory, more information please call.
angle steel/side length: siehe TD mm double T-iron on the x-axis: siehe TD mm U-iron on the x-axis: siehe TD mm total power requirement: 7,5 kW weight of the machine ca.: 2,35 t dimensions of the machine ca.: 1580 x 1200 x 1410 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
angle steel/side length: siehe TD mm double T-iron on the x-axis: siehe TD mm U-iron on the x-axis: siehe TD mm total power requirement: 120 kW weight of the machine ca.: 78 t dimensions of the machine ca.: 6100 x 5150 x 4300mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
angle steel/side length: unbkt. mm double T-iron on the x-axis: unbkt. mm U-iron on the x-axis: unbkt. mm total power requirement: 30 kW weight of the machine ca.: 8,6 t dimensions of the machine ca.: 2500x2000x1900 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
round bar steel: 45 mm square edge steel: 42 mm L-beam: 140 x 13 mm flat steel: 350 x 20 mm pressure: 550 kN throat: 305 mm notching: rectangle tool: mm total power requirement: 5,5 kW weight of the machine ca.: 1260 kg dimensions of the machine ca.: 1360 x 750 x 1565 mm 2 working cylinder with 2 separated electric foot switch for 2-people-handling New notching table, new knife for the rectangle notcher and new punching table included For further information please see brochure. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
amplification -fold: ? diameter: 380 mm workpiece height max.: 200 mm voltage: 230 V weight of the machine ca.: 245 kg dimensions of the machine ca.: 0,80 x 1,20 x 2,00 m - Serial-No.: 1740 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
machine measurements: 850 x 1.800 x 1.450 mm machine weight: 360 kg power capacity: 0,7 kW Condition: new Specification: Powder coating machine, type: EPC-30/2E The machine is designed for the powder coating of cables, hoses and profiles. - Product diameter max.: 30 mm - Product speed max.: 1,500 m/min - Powder throughput min.: 30 g/min with fine dosage - Powder throughput max.: 400 g/min per powder injector - Electrostatic: available as option - Connected load: 0.7 kW - Dimensions LxHxW: 850 x 1,800 x 1,450 mm - Weight approx.: 360 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
5 axis sawing, drilling and milling – portal machining center with 9 meters machining length (alternatively shorter – 7 or 4 meters machining length) for all profile and pipe materials - aluminum - steel - stainless steel - plastics - fiber composite plastics such as GRP and CFRP - drilling + tapping, flow drilling, milling + thread milling at a free angle – for example, steel profiles sawing up to 15 mm wall thickness – glass or carbon fiber materials up to 25 mm wall thickness Largest saw blade diameter 500 mm Largest machining length with a 5-sided machining 9,000 mm Largest workpiece cross-section 650 mm x H 450 mm Working range in five-axis operation 9,000 mm x 475 mm x H 450 mm Spindle drive power 18 kW at 60% ED – 15 kW at 100% ED Milling spindle speeds up to 24,000 rpm Moving turret tool magazine for 12 pieces of tools Tool holder HSK63 Rapid speeds up to 100 ...
Stock# U2450-2 Used progressing cavity pump by Netzsch model NM045SH04S24H. Contact parts designed in stainless steel, hygienic design. Inlet has diameter 80 mm, connection with reduction to 50 mm. Outlet has diameter 50 mm. Pump is driven by reducer and el. motor 7.5 kW, 1445 rpm, 400/690 V, 50 Hz. Working screw rotation up to 188 rpm. This size of pump can reach output up to 20 m3/h at rotation 550 rpm. With current drive pump can reach output about 6.8 m3/h. Feeding pressure up to 24 bar. Pump is mounted on mobile stainless steel supporting frame. Included set of hoses: - 1 x dia. 80 mm x L 250 cm. - 1 x dia. 65 mm x L 250 cm - 1 x dia. 35 mm x L 250 cm - 1 x dia. 25 mm x L 250 cm - 1 x dia. 35 mm x L 120 cm Transport dimensions: L 280 cm x W 70 cm x H 95 cm.
with B200/25 and Number: 6852884, Shrink Wrap / Foil Sealing
Folding and Inserting Machine: speed: upto 4.000 per hour, maximum monthly performance: 70.000, maximum annual output: 600.000, power required: 230V, noise level:
Baguette Long Scooter Kemper FR Kombi - Baguette long scooter from Kemper - Model FR COMBI - Stainless steel clad - with outlet table - can be driven on castors - 400 Volt 50Hz
Major Baguette Long Scooter with feed belt / conveyor belt relatively good condition without export plate 380V 50Ht on rolls Metrics: Height: 160cm Width: 100cm Depth: 150cm
used
Milk Pasteurisation Set With Seital Separator 2000-3000[tel:2000-3000] L/h Description This Combined GEA VT 10 pasteuriser with Seital Cream Separator was used on Cheese and Fresh milk products. This is ideal for a small/medium sized dairy wanting to move away from manual cleaning separators and Bach Pasteurization process gaining time, efficiency and product quality . Having a cream separator opens new markets for the dairy such as butter, cream, clotted cream, skimmed milk and zero fat milk products are some of the opportunities. Pasteuriser Make : GEA Model : VT 10 Year of Manufacture : 2005 S/N : 169/15597[tel:169/15597] Temperatures: Shown in Chart Hot Water inlet PHE Balance Tank Temperature Valve regulation Diver Valve for non pasteurised product Chart Recorder Product pumps Water Pump Stainless steel skid mounted for quick installation Con ...
I sell the Fensterbau cone cutting and slotting system Weinig Unitec 10. Year of construction 1998. Milling heads OERTLI. Available the same. Unit price 5.500 euro. 3 pcs. available. Condition very good !
Hello Here is the layout of the Lines module. Furthermore, a list of the individual machines of the Ecoprogetti plants, with compilation of the new purchase prices of the entire system: The plant is to be sold against the highest bid. , We are pleased about your interest in cooperation in the field of industrial plants. Offer: Production of photovoltaic modules, equipped with very high quality Ecoprogetti, Teamtechnik and 3D-Micromac machines. Year of construction. 2021 – 2022 Lines. approx. 400 modules per line per line. 7.5 hours (300 MB performance) Halls: Production/assembly area: approx. 180 x 50m / 9000m² Module/quantities per layer: 720 pieces to Max: 800 pieces, it depends on the size. Equipped: 4 pieces of Stringer i8 TT 2000 and 6 pieces of Stringer TT 2100 all year of construction 2021 - 2022 This plant has a completely new pric ...
I sell the window construction kit: 1 pcs. cone cutting and slotting system Weinig Unitec 10. 1 pcs. profile automatic converter center Weinig Univar 10. Year of construction 1998. Milling heads OERTLI. Available the same. Price together 10,000 euros. Condition very good !
Stirring tank REITZ RB300LRW037250 Stainless steel tank 300 liters with agitator 0.37 KW, used gear motor KEB 30 rpm. Stainless steel stirring tank 300 liters with outlet tap 3/4-inch. Diameter 630 mm, container height 990 mm. Tripod height 425 mm. Gear motor: Used gear motor KEB, 3 x 230/400 volts, 0.37 kW, n1 = 1350 rpm, n2 = approx. 30 rpm. With motor protection switch. Shaft: Precision stainless steel shaft D20, length 1000 mm, diameter 20 mm, material stainless steel 1.4301. With rigid coupling 28/20 in stainless steel 1.4571. Stirring organ: Four-bladed inclined blade stirrer, diameter 275 mm, material stainless steel 1.4571. Very slow-running, high-torque agitator.
Qty. 1 Second-hand vertical powder painting line for Aluminium profiles Mfc.: Trevisan Cometal Built: 2007 Type: IV/7.00 Profile dimensions: 7000 x 150 x 200 mm - H x W x D Weight of profiles: 25 kg/each max. Total weight onto the chain: 10,000 kg Weight distributed linearly for only 1 meter: 50 kg/m of chain Conveyor speed: 1.5 m/min. Temp. in the polymerisation furnace: 170÷195 °C Rated hanging pitch along the chain: 66/100/133/200 mm Scope of supply: Pre-treatment tunnel Drying oven Painting system Cleaning system Infrared oven Polymerisation oven Descending chain conveyor Transport system
We offer props Doka slab prop Eurex 30 eco 300 NEW! Doka ceiling prop Eurex 30 eco 300 NEW at 51.90 EUR/unit. Doka stacking pallets, new a. 170,00EUR/piece always 40 pieces / stacking rack. We offer new Doka floor prop Eurex 30 eco 300 Original price = 122,00€ 1400 pcs. available now! – 51,90€/pcs. special net price Doka stacking pallet 1.55x0.85m, new – €170.00/pc Doka's tested Eurex 30 eco quality prop is characterised by a high minimum load capacity of 30 kN and complies with column class C/E in accordance with the EN 1065 standard. In addition, the steel prop convinces with its simple and safe handling, as well as with its convincing price-performance ratio. Product: • Column class C/E according to standard EN 1065 • General building authority approval Z-8.311-942 • High load capacity of up to 41.2 kN depending on extension length, minimum load c ...
Central processor unit CPU, also with model number: 170174 recognizable, price ex stock
I sell the complete window construction profiling line: 1 pcs. 5-spindle four-side planer with saw Weinig Unimat 23EL - without grinding machines HESS - other replacement machine by appointment 2 tap cutting and slotting system Weinig Unitec 10. 2 pcs. profile automatic converter center Weinig Univar 10. - Set of complete Weinig automation feeders and foerderer. - without a central computer - must be added and programmed. Year of construction 1997. Milling heads OERTLI. Available the same. Immediately dismantled with original pallets. Price together only 48,000 euros. Condition very good !
I sell a 4-side brush machine suitable for windows, turrets, tables, etc. Futura MS120 Y1 X2, built in 2005 Working width 1200mm Working height 200mm Total weight 2500kg Configuration: Side grinding heads left - right H.170mm 2 underheads left - right nylon B.140mm Oscillating top head B.260mm Large grinding heads top - bottom B.1150mm Machine together with all the heads on the picture. Available the same.
Hilscher Profibus DP Slave Card / Comp. PCI 1080.420/CIF 80-DPS
I sell the scM Multiflex window angle system. Milling heads VIVALDI EU68mm. Incision + cone spindle right / cone side. 2 pcs. profile milling spindle + glass list cutting saw left / roll forming side Available the same.
: 30 / 900 mm : 30 / 900 mm L-beam: 35X35X5 / 600 mm T - beam - web outwards: 50x6 / 600 mm Axis diameter: 40 mm work speed: 4,5 m/min roll diameter: 148 mm total power requirement: 1,1 kW weight of the machine ca.: 0,3 t dimensions of the machine ca.: 0,75 x 0,6 x 1,4 m Electric profile roller - Either horizontal or vertical working - 1 set of hardened standard rollers - lower 2 rollers are driven - 1 set of plastic rollers for diameter 33.7mm / 1 - Operation manual - Foot switch left / right and EMERGENCY STOP The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Laser Prima Industrie mod. Platinum 1530 Year 2008 CNC Primach P20L Working hours about 25.000 Visible running.
maximum number of results exceeded
please refine your search
