pro used for sale

: gebraucht : WA0138 : 1960 € : 1 : 3100 mm : 200 mm slightly cranked The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU056U362 MakePUC Probst & Class TypeK-100 No.91079 Year of construction1991 LocationBarneveld Material Rotor materialStainless steel Main Features MaterialStainless steel Motor5.5 KW Inlet diameter50 mm Specified Features - Colloid mill MaterialStainless steel Colloid mill in line(1x) Rotor sizesø 100 mm Teethed rotorcheck Without hoppercheck InletDN50 OutletDN50 Motor5,5 kW (400 V, 2905 rpm (Ex)) Speed2905 rpm Information Mounted on wheelscheck With switchcheck Floorspace0,9 x 0,6 m Total height1,3 m Weight125 kg ATEX compatiblecheckDiscountColloid millsPuc Probst & ClasDiscountMills > Colloid millsBrand > Puc Probst & Clas What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherland ...

General SKU094Y627 MakePUC Probst & Class TypeK-180 EL No.88004 Year of constructionunknown LocationBarneveld Motor Motor power30 kiloWatt Main Features MaterialStainless steel Motor30 KW Inlet diameter25 mm Specified Features - Colloid mill MaterialStainless steel Colloid mill in line(1x) Rotor sizesø 180 mm Cross teethed rotorcheck With jacketcheck Inlet4x ø 25 mm Outletø 60 mm Motor25,0/30,0 kW (380 V, 2960 rpm (Ex)) Speed1475/2960 Rpm Information Floorspace1,7 x 0,7 m Total height0,7 m Weight650 kg ATEX compatiblecheckDiscountColloid millsPuc Probst & ClasDiscountMills > Colloid millsBrand > Puc Probst & Clas What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in  ...

General SKU071F406 MakeFima Process GmbH TypeTZT-400x300 No.20300211 Year of construction2003 Mounted on framecheck Main Features MaterialHastelloy Motor7.5 KW Inlet diameter400 mm Specified Features - Basket centrifuge Basket centrifugecheck dryer Perforated basketcheck Capacity37 Ltr Basket sizesdia. 400x300mm Max. loading weight20 kg Motor7,5 KW, 400 Volt (Ex) Max. basket speed1800 Rpm With jacketcheck MaterialStainless steel 2.4602 (Hastelloy C-22) Information LocationBarneveld Floorspace2,5x1,1 m Total height1,3 m Weight2000 kg ATEX compatiblecheckDiscountBasket centrifugesFima ProcessDiscountCentrifuges > Basket centrifugesBrand > Fima Process What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The ...

General SKU412U1294 MakeFryma Koruma Disho LocationBarneveld TypeV100/45 Pressure Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume45 Ltr. Motor5.5 KW Specified Features - Processing vessel Closed stirring vesselcheck Capacity45 ltr Vessel sizesDia. 500x420mm ( polished inside) Conical bottomcheck Dished top sidecheck With covercheckDia 500mm Top connectionsInlet dia. 325mm ( with hopper) OutletDia. 30mm With jacketcheck Volume 5,2 ltr, pressure 6 bar, allowable temp 180°C Max. temperature180°C With anchor stirrercheck with scraper Motor0.25kW, 220/380Volt, 1380rpm With homogenisercheck Dia. 100mm, 0-5000rpm Motor5,5kW, 0-270Volt, 0/5000rpm MaterialStainless steel 1.4571 (316Ti) Information No.4.027 Year of construction1988 Mounted on legscheck With switchgearcheck Floorspace1,4x1,35 m Total height1,45 m W ...

General SKU387U1057 MakeZoatec TypeProzessbehaelter 600 LocationBarneveld CEcheck Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket3 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume600 Ltr. Motor4 KW Specified Features - Processing vessel Closed stirring vesselcheck Capacity600 Ltr. (max. 890 Ltr.) Vessel sizes1000x1350 mm Conical bottomcheck Dished top sidecheck With covercheck ManholeDia: 300 mm Top connectionsDN100, DN25, DN40 (2x) OutletDN80 With jacketcheck Half coil jacketedcheck Max. temperature0/100 °C With anchor stirrercheck (with scrapers) Motor4 kW, 220-242/380-420 volt, 1460 rpm Speed mixing shaft117 rpm With homogenisercheck (Zoatec / AZO LIQUIDS: IL2, 160 mm, 600-4000 rpm) Motor18,5 kW MaterialStainless steel 1.4404 (316L) Information No.103867-00 Year of construction2013 With swit ...

General SKU087F445 MakeUnimix Haagen & Rinau Bremen No.865 3814 Year of construction1988 LocationBarneveld Pressure Working pressure2 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume5.5 Ltr. Specified Features - Processing vessel MaterialStainless steel Closed stirring vessel(1x) Capacity5,5 Ltr Vessel sizesdia. 245x165mm (conical vessel) With covercheck With jacket(3 Ltr), With electric heating Max. temperature133/150 Degr. C. (vessel/jacket) With anchor stirrerscraper stirrer (motor 370 Watt) With homogenisercheck Motor900 Watt, 220 Volt (1 Ph) Information With switchcheck Floorspace0,8x0,5 M Total height1,0 M Weight200 KG Technical specs Extra informationconical vesselDiscountProcessing vesselsUnimix H&RDiscountProcessing vessels > Processing vesselsBrand > Unimix H&R What you can expect from Foeth: -- Ma ...

General SKU004Y057 MakePressindustria S.p.A. TypeTE.3/SV/R/5 No.4302 Year of construction1983 LocationBarneveld Pressure Working pressure0.067 Bar Vacuum possiblecheck Working pressure jacket3 Bar Main Features MaterialStainless steel Volume7 Ltr. Motor0.55 KW Specified Features - Processing vessel MaterialStainless steel 1.4401 (316) Closed stirring vesselVacuum processing vessel (1x) Capacitymin. 3/max. 7 Ltr Vessel sizesdia. 250x250mm, Vessel can be lifted hydr. Dished bottomcheck Flat top sidecheck With covercheck With jacketcheck Max. temperature160 Degr. C. With anchor stirrerscraper stirrer Counter rotating stirrercheck Motor0,07/0,22 KW, 220 Volt (3 Ph) Speed mixing shaft3-60 Rpm With homogeniser(400-2000 Rpm) Motor0,2/0,55 KW Information With switchgearcheck Floorspace1,2x0,9 M Total height2,3 M Technical specs Extra informationVessel can be  ...

General SKU013X045 MakeBrogli TypeMH-20C No.1536 Year of construction1973 LocationBarneveld Pressure Working pressure0 Bar Vacuum possiblecheck Working pressure jacket1 Bar Main Features MaterialStainless steel Volume25 Ltr. Specified Features - Processing vessel MaterialStainless steel 1.4301 (304) Closed stirring vesselVacuum processing vessel (1x) Capacity25 Ltr, Useful 20 Ltr Vessel sizesdia. 345x275mm, Vessel mounted on wheels Dished bottomcheck Flat top sidecheck With jacketcheck With propellor stirrer(spiral Helix stirrer) With anchor stirrerscraper stirrer Motor± 0,18/0,24 KW Speed mixing shaftAnchor 30,5/61, Helix 61/122 Rpm With homogeniser(1500/3000 Rpm) Motor± 0,25/0,37 KW Information With switchcheck Floorspace1,2x0,7 M Total height1,4 M Technical specs Extra informationVessel mounted on wheels DiscountProcessing vesselsBrogliDiscountProce ...

General SKU002Y164 MakePUC Probst & Class TypeN-100E No.74099 LocationBarneveld Material Housing materialStainless steel Rotor materialStainless steel Main Features MaterialStainless steel Motor4 KW Inlet diameter50 mm Specified Features - Colloid mill Colloid mill in line(1x) Rotor sizesø 100mm Cross teethed rotorcheck Motor4,0 kW, (380 V, 2880 rpm) With variable speed drive(frequency converter) Speed100- 2880 rpm MaterialStainless steel Information Mounted on wheelscheck With switchcheck Floorspace1,7 x 0,7 m Total height1,1 m Weight300 kgDiscountColloid millsPuc Probst & ClasDiscountMills > Colloid millsBrand > Puc Probst & Clas What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Ple ...

General SKU107S404 MakeFillworth No.70-19-97A Year of construction1997 LocationBarneveld Main Features MaterialStainless steel Volume10 Ltr. Specified Features - Processing vessel MaterialStainless steel 1.4301 (304) Open stirring vesselVacuum lab mixer with discharge press (1x) Capacity10 Ltr Vessel sizesDia. 250x300mm Flat top sidecheck With covercheck OutletDia. 20mm With anchor stirrer(0-47 Rpm) With dissolver stirrer(0-1230 Rpm) Motorpneumatic Information With switchgearcheck Floorspace1,0x1,0 M Total height2,0 M Weight400 KGDiscountProcessing vesselsFillworthDiscountProcessing vessels > Processing vesselsBrand > Fillworth What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please vis ...

General SKU042B316 MakeGTI-FIB Process Equipment Leeuwarden No.70076305 Year of construction2002 LocationBarneveld Pressure Working pressure8 Bar Vacuum possiblecheck Working pressure jacket4.5 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume1300 Ltr. Motor0.55 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4404 (316L) Stainless Steel Reactors Reactor(1x) Capacity1300 Ltr Vessel sizesdia. 1000x1318mm Dished bottomcheck Dished top sidecheck Outlet2x dia. 50mm With jacket(250 Ltr) Max. temperature210 Degr. C. With propellor stirrermake Typhoon Motor0,55 KW, 230/400 Volt (Ex) Information Floorspace1,6x1,6 M Total height3,2 M Weight1300 KGCatalysts & fillersStainless Steel ReactorsSolventsDiscountDetergent & surf.Other pharmaceuticsCosmeticsOrganicsLubricants & oleoSolid pharmaceuticsDyes & pigmentsAPIMine ...

A height-adjustable turning device PETec for welding work is available. Rotation function: 360°, max. load capacity: 1000kg, height adjustment range: 500mm-2000mm, column spacing range: 500mm-3000mm. An on-site inspection is possible.

: neu : ca. 4 Wochen ab Auftragse : Polen : 1595 € : 1 : 1 : 21 mm : 60 ° : 2740-3290 U/min : 2.2 kW : 21 kg portable heavy-duty machine designed for bevelling steel plates and -pipes guide rolls for easy operation automatic overload protection two milling heads with 10 square cutting inserts The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 1595 € : 23 mm : 19 mm Weldon : 1.6 kW : M20 : 266 mm : 259 mm : 500 mm : 17 kg : 23 mm : 50 mm : 75 mm : 190 mm : 160 - 250 / 390 - 580 U/min : 8 mm The PRO-52T drilling machine is suitable for hole cutting and tapping applications. Powerful variable speed motor enables milling capacity up to 50mm (2”) and drilling capacity up to 23 mm (7/8”). Machine’s forward &, reverse work modes allow thread cutting up to M20 with Promotech’s new tapping system. Two speed gearbox with continuous speed adjustment allows to set the optimal speed depending on diameter, steel gradeor tool quality. Intelligent speed control system maintains constant motor speed regardless of changing loads. Innovative 360-degree LED indicator facilitates proper machine operation and increases work safety. Features and benefits: • powerful motor with heavy duty 2- ...

Excellent condition - Fully operational - Loading / Transport possible! - total connected load 20 kW - travel X 3550 mm, Y 1680 mm, Z 275 mm - travel speed X 80 m/min, Y 80 m/min, Z 20 m/min - 2 pick-up places for aggregates - 18-fold plate changer - main milling spindle with C-axis HSK 63 F tool holder - Milling spindle power 9 kW - additional heavy boring gear horizontal in Y-axis - Swivelling Grooving Saw - 5 vertical drilling spindles in Y-axis - 10 vertical drilling spindles in X-axis - 2 + 2 horizontal drilling spindles in X-axis - 1 + 1 horizontal drilling spindles in Y-axis - safety fence left/right - 6 consoles depth approx. 1300 mm - various vacuum clamps - working area X 3060 mm - working area Y 1210 mm front fence row - 1working area 260 mm rear fence row, set 100 mm - laser positioning for vacuum clamp - vacuum pump BECKER PICCHIO 2200 - YOM 2009 - ...

Capacity 230 x 120 mm 5 spindles: Bottom 7,5 kW? Fence / Near 11 kW ? Top 7,5 kW ? Bottom 5,5 kW Spindle speed 6000 rpm Variable feed speed 6 to 24 m/min, motor 4 kW Straightening table 2000 mm Driven table roller Mechanical/digital read-out Centralised lubrication CE sound/safety hood Interior light Hopperfeed EM 11, upt to 60 cycles/min Workpiece length: 350 to 3000 mm Workpiece width: 20 to 230 mm Workpiece thickness: 12 to 70 mm Air requirement: 8 bar, connection DN8 Extraction requirement: 840 - 9600 m3/h, air speed 30 - 34 m/s Tooling not included

Capacity: 230 x 120 mm. Spindles: 4 bottom 4 kw fence and near 5,5kW top 5,5 kw Spindle diameter 40 mm Cardan shaft drive, motor 2,2 kW Pneumatic pressures Infeed table 2 m lengte Waxilitpump for bed lubrication, manual Safety hood

Capacity: 260 x 130 mm. Spindles: 5 Shaft diameter 40 mm Bottom 4 kW, right/left 7,5 kW, top 5,5 kW, bottom 4 kW Cardan shaft drive Pneumatic pressures Feed speed variable, motor 3 kW Motorised height adjustment of top presssure beam Infeed table 2200 mm length tools not included

Single sided edge bander with hot melt, fixed side at the right, pre-milling unit Edge thickness: 0,4 to 12 mm Workpiece thickness: 8 - 60 mm Feedspeed 8-20 m/min (limited to 10 m/min using the contour trimming) Workpiece transport by chain, top pressures with rubber rollers Sound enclosure over all trimming motors Equipment: Adjustable fence Pre-milling with 2 shapers, each 2,2 kW Coil and strip magazine Hot melt unit, Quickmelt type Pressure zone with1 driven and 2 non-driven pneum. Loaded rollers End trims, 2 x 0,35 kW motors, straight and chamfer 15? Top/bottom trimming, motors 2 x 0,35 kW Radius trimmming Contour trimming unit, leading and following edge, 2 x 0,35 kW Radius scraping unit Glue scrapers Buffing unit Controlls PC 20+

Working area: X 5005 x Y 1520 mm x Z 200 mm Main spindle travel: X 5910 mm, Y 1815 mm, Z 655 mm. Travel speed: X 80 m/min, Y 80 m/min, Z 25 m/min 8 workpiece consoles with automatically positioning vacuum cups Equipment: Drilling unit with 19 spindles, 7 vertical spindles in X, 6 vertical spindles in Y, 2 double horizontal spindles in X, 1 double horizontal spindle in Y Slotting saw Milling motor 12 kW, 1000?24,000 rpm, HSK-F 63 mounting, liquid-cooled, 5-axis controlled Tool changer with 22 positions Vacuum pumps with 2 x 100 m?/h capacity PC control Masterwork software Integrated waste conveyor

Motorised height-adjustment Sound enclosure over all trimming motors Equipment: Coil and strip magazine Hot melt unit Pressure zone End trims, chamfer and straight, automatic adjustment Top/bottom rough trimming Top/bottom fine trimming, tilting, Contour trimming unit Scraping unit Buffing unit return conveyor Ligmatech ZHR 05

Agie Wire Cutting EDM Machine High-Precision Wire EDM System This 2018 Agie AC Progress VP3 represents top-tier wire electrical discharge machining (EDM), offering flawless contour accuracy and superior surface finishes for critical components. Technical Details ‍ 1. Machine identification data Name: Wire Cutting EDM Machine (Electric Discharge Machining) Manufacturer: Agie Model: AC Progress VP3 Machine number: 591.3.020.530 Year of manufacture: 2018 2. Operational parameters Travel (X / Y / Z): 500 x 350 x 426 mm Travel (U / V): ± 70 mm Max. taper angle: 30° at 100 mm height Max. workpiece dimensions (X / Y / Z): 1050 x 650 x 420 mm Max. workpiece weight (without water): 400 kg Max. workpiece weight (with water): 800 kg Wire diameters: 0.15 – 0.33 mm Generator: IPG-VPC Max. cutting rate: > 500 mm²/min Best surface roughness: Ra 0.2  ...

Agie Wire Cutting EDM Machine Precision Wire Cutting EDM Machine A staple in advanced toolmaking, this 2006 Agiecut Progress V3 delivers highly reliable and accurate wire EDM capabilities for intricate metal cutting applications. Technical Details ‍ 1. Machine identification data Name: Wire Cutting EDM Machine (Electric Discharge Machining) Manufacturer: Agie Model: Agiecut Progress V3 Machine number: 333.010.008 Year of manufacture: 2006 Control: AGIEVision 5 2. Operational parameters Working area (X / Y / Z): 500 x 350 x 426 mm U-V Axis: +/- 30° / +/- 70 mm Max. workpiece dimensions (L x W x H): 1,050 x 650 x 420 mm Max. workpiece weight (with/without Dielectric): 800 kg / 400 kg Resolution of axes: 0.0001 mm Positioning speed: Up to 3 m/min Clamping system: Universal beams with fixing holes Cutting wire diameter: 0.2 – 0.33 mm  ...

This 6-axis EASYROBOTICS ProFeeder was manufactured in 2025. It features a modular robot cell system designed for small to medium batch production, with a top plate size of 900 × 800 mm. This collaborative robot is compatible with various cobots and is ideal for applications such as CNC machine tending, pick and place, assembly automation, and parts handling. If you are looking to get high-quality automation capabilities, consider the EASYROBOTICS ProFeeder machine we have for sale. Contact us for further details.

table length: 1000 mm table width: 1000 mm table height: 100 mm bore: 16 mm weight: 200 kg Special offer: Exhibition use – slight scratches on the surface Features: - Surface holes in a 50x50 mm grid - Holes in the side panels in a diagonal grid - 4 feet – standard configuration 750 mm - Through-hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 11.5 – 13 mm - Side panel made of high-quality steel S355J2+N + plasma nitriding - Hole Ø 16 mm - Corners, edges and holes rounded - Side panel height 100 mm - Includes scale markings on the surface - Construction reinforced with ribs - Grid lines enable precise set-ups The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mm table width: 1200 mm table height (lateral area): 200 mm weight: 504 kg dimensions of the machine ca.: 1200 x 1200 mm New price approx. 4.000 euros Special price on request Product description - high-quality steel S355J2 N plasma nitriding - Material thickness approx. 24.5 - 27 mm - Hole á 28 mm - Drill holes surface 100x100 mm grid - Corners, edges and drill holes rounded - Side panel height 200 mm - Hole spacing side panel 50 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise superstructures The welding tables are provided with a scale as standard. Plasma-nitrided design : - Protection against rust / scratches / welding spatter adhesion - more corrosion resistant / higher load capacity Features: - 28 hole pattern / dimensions 1200 x 1200 x 200 mm - plasma-nitrided version (750) with scale - incl. 4x foot basic eq ...

: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 1995 € : 25 mm : 19 mm Weldon : 1.6 kW : M20 : 266 mm : 259 mm : 505 mm : 18 kg : 25 mm : 70 mm : 75 mm : 190 mm : 120-190 / 290-450 U/min : 8 mm The PRO-72T drilling machine is suitable for hole cutting and tapping applications. Powerful variable speed motor enables milling capacity up to 70 mm (2-3/4”) and drilling capacity up to 25 mm (1”). Machine’s forward &, reverse work modes allow thread cutting up to M20 with Promotech’s new tapping system. Two speed gearbox with continuous speed adjustment allows to set the optimal speed depending on diameter, steel grade or tool type. Intelligent speed control system maintains constant motor speed regardless of changing loads. Innovative 360-degree LED indicator facilitates proper machine operation and increases work safety. Features and benefits: • powerful motor with heavy duty 2-spe ...

Overview The handle applicator was manufactured by the German company project Automation & Engineering GmbH in 2001 and was until recently part of a PET filling line at a large German soft drinks manufacturer. The handle applicator is now being released. Technical data  Total output: 70 cycles/min electrical connection: 400V/N/PE/50Hz, 3,6kW Two lanes Additional information best-by date coding bottle available (Videojet Excel 170i Ultra High Speed) conveyor for packages available

: neu : 2018 : 070033 : prompt, Zwischenverkauf v : Türkei : 20310 € : 389.95 € : 1 : 0.6 - 4 mm : 300 mm : 900 mm² : 80 mm : 10 Nm : 2.62 kW : 1000 mm : 800 mm : 1400 mm : 330 kg DEMO MACHINE helical gear box Wattdrive pneumatic equipment Festo control SCHNEIDER with touchscreen 2 driven rolls remote service module hand wheel Euchner operating manual in German with EC conformity declaration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 24585 Hydr. Welding Rotary and Tilting Table - Three Axis - Welding Manipulator Technical data: - Max. load capacity 3000 kg - Face plate diameter 1100 x 1100 mm - Face plate with hydraulic lifting + swivelling + tilting - Rotary movement electr. infinitely variable 0.01 - 1 rpm - Right + Counterclockwise - Welding current transmission approx. 500 A - Drive 400 V - Connected load 5.5 kVA - Min. table height in horizontal position approx. 1200 mm - Max. table height in horizontal position approx. 1980 mm - Handheld remote control - E - Footswitch - Space requirement approx. W 1700 x H 1300 x D 2950 mm - Weight approx. 4000 kg

Three older milling machines are available. 1) CNC vertical center Bridgeport VMC 1000/22, year of manufacture: 1999, travel X/Y/Z: approx. 1020mm/510mm/500mm, table dimensions X/Y: approx. 1150mm/490mm, max. table load: 900kg, tool holder: SK40, tool positions: 22, speed: 6000rpm. Machine dimensions X/Y/Z: approx. 2850mm/2200mm/2750mm, weight: approx. 3900kg, control: Heidenhain TNC 410P. 2) CNC engraving and milling machine Paso P700C, year of manufacture: 2001, machine dimensions X/Y/Z: approx. 1650mm/1550mm/2450mm, weight: approx. 1700kg. 3) CNC engraving and milling machine Kuhlmann Prokomat 25S, year of manufacture: 1991, travel X/Y/Z: approx. 700mm/600mm/300mm, table dimensions X/Y: 720mm/700mm, portal clearance X/Y: 800mm/400mm, feed: 6m/min, machine dimensions X/Y/Z: approx. 1600mm/1600mm/2400mm, weight: approx. 1600kg. Documentation available. An on-site inspection is possible. ...

: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 1695 € : 12 mm : 19 mm Weldon : 0.45 kW : 316 mm : 235 mm : 328 mm : 115 kg : 12 mm : 36 mm : 50 mm : 70 mm : 260 U/min : 6 mm The PRO-36 Battery is a drilling machine designed to drill holes of diameters up to 36 mm (1 7/16”) by using annular cutters. The machine can also drill holes of diameters up to 12 mm (0.47”) by using twist drill bits. Cordless drill is equipped with LED monitoring system that generates signals in green and red colours to indicate current condition of the drill and give safety information. Control panel is equipped with so called „vandal resistant” illuminated start/stop switches (green/red) Features and benefits: • LED Monitoring System indicates current condition of the drill and gives safety information • LED interface flashes green when inadequate adhesion is detected due to e.g. gap or thin work piece ...

For sale: Zetor Proxima 8441 tractor (built in 2007) - Technical data: Engine power: 84 hp / 62.6 kW Operating hours: 2,220 hours Operating weight: 3,701 kg Cylinders: 4 Engine: turbocharged diesel All-wheel drive (4WD) - Dimensions: Length: 386 cm Width: 185 cm Height: 264 cm - Equipment: Front loader Air conditioning

Overview  This Glass Bottle Bottling Line for Still and Sparkling Water was manufactured on average in 2001 by several European manufacturers, including TMG, Zecchetti, Bardi, Muvitec, Procomac, P.E. Labellers, and others. It is a complete and fully integrated line covering all major production steps such as depalletizing, washing, filling, capping, labeling, case packing, palletizing, and wrapping. The line was regularly maintained, includes newer components, and will be available from July 2025, as it is currently in operation. Technical data  Capacity: up to 12,000 bph Formats: 250 ml, 330 ml, 500 ml, 750 ml, 1000 ml Product: Still and sparkling natural mineral water Neck finish: S294 MCA - 1 Bottle diameters: 170 mm, 205 mm, 218 mm, 259–271 mm, 295 mm Case formats: 250 ml: 24-bottle carton 330 ml: 24-bottle carton 500 ml: 12-bottle carton / 20-bottle plastic 750 ml: 12-bottle car ...

Overview  This complete bottling line was last used for bottling spirits and includes a rinser filler combo with capper for t cork, conveyor belts, carton erector and sealer. The line achieves a maximum output of 2,000 bottles per hour, depending on the bottle volume and product. As production volumes are increasing, the seller has received a new line with higher capacity. To present the line in decent condition, the seller has installed it in the ware house. Technical details  Output: 2,000 bottles/hour Different bottle shapes possible as the height and width can be adjusted Bottle volumes from 0,5l to 3,0l are possible Last used for: Spirits, can also be used for other liquids Scope of delivery  Project AE PRORINS2000 Linear rinser with speed up to 2,000 bph (2020) Project AE PROFILL2000 Linear filler with 10 electrically controlled filling valvesc(2021) Borelli Capper for T-cork C ...

: neu : ca. 8 Wochen ab Auftragse : Türkei : 29460 € : 562.69 € : 0.4 - 4 mm : 100 mm : 400 mm² : 80 mm : 75 m/min : 10 m/s² : 10 Nm helical gear boxWATTDRIVE (Made in Austria) FESTO pneumatic equipment servo drive and control SIEMENS 7", colour touchscreen SIEMENS 2 driven rolls OPTIONAL EQUIPMENT Handrwheel and Simlinx remote control € 4.290,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 090185 : prompt, Zwischenverkauf v : Polen : 7950 € : 153.44 € : 1 : 47 to : 110 mm : 27 mm : 25x18 mm : 8 s : 16 mm : 700 bar : 479 mm : 135 mm : 388 mm : 117 kg MOBILE HYDRAULICS-POWERSTATION Double action - fully automated process of punching and return Wide range of hole diameters up to 27mm Intelligent control system with inching and automatic load detection Mode indicator light Protection against accidental start-up OPTIONAL: Gantry punching station for increased productivity and operation comfort € 710,- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TECHNICAL DATA: Width of inlet planer: 1970 mm Working width: 250 mm Working height: 150 mm Spinel: Ø 40 mm Number of Spindles: 5 Cardan shaft drive (2.2 kW) Speed: 6000 rpm Installed power: 22 kW Voltage: 380 V SPINDLE CONFIGURATION: I bottom (4 kW) II-III right-left (5.5 kW) IV above (4 kW) V bottom (4 kW) ACCESSORIES: Complete with tools Miscellaneous Accessories

Finishing machine single-sided machining or double-sided machining, second-hand 3 FLAKKO units with 4 disc tools each: Drive power 7.5kW Spindle speed 300 - 2500 rpm Feed speed 2-20 m/min Wet machining Tool diameter 230mm Working width 400mm for single-sided machining Working width 200mm for double-sided machining with turning device Special magnetic inserts designed for hot machining IPC control with PLC Connected load 3x 400V 50Hz Connected load approx. 52 kW Overhaul of all units with conversion to new 4-point bearing between 2021 and 2023. Special-price 25.000 EURO, net -free loaded truck- Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Disposable PET filling line consisting of the following components: - Crate ejector (crate emptier, Gera GmbH, 20 ejectors in a 4x5 arrangement) for 0.5-litre bottles - Crate ejector for 1.0-litre bottles (Gera, 2003) - Case washer with cleaning nozzles - Stretch blow moulding machine (SIG, type Blomax 18, built in 2003, with 18 cavities) - Air conveyor for PET bottles (Convair, 2001) - Suction system (2003) - Air transport (KHS Innoline, 2003) - Premix system (Procomac Starmix CM, built in 2001, 250 hl/h) consisting of water degassing, mixer and carbonation with a total of 4 containers - Velcorindo dosing (dmt, Burdomat II G) - Cap feeding and cap conveyor system (Procomac, 2005) - PET bottle rinser, filler and capper (Procomac, 2001) - Labelling machine (P.E. Futura, 2001) for hot glue labelling of wrap-around labels, in block with laser dating (Videojet, 2017, with suction) and label  ...

Prominent water treatment plant, consisting of: 1. Softening: The raw water is fed into the double softener. Only one bottle is ever in operation and the other is in regeneration or stand-by. In the softener, calcium and magnesium are replaced by sodium. The system has a volume counter that switches to the other bottle when the preset quantity is reached. Regeneration takes place with saline solution from the brine tank. The value at the outlet is 0°dH. 2. reverse osmosis: Reverse osmosis fills the permeate tank with demineralised water, so-called permeate. Depending on the raw water quality, water temperature, condition of the membrane and correct setting, different conductance values and operating pressures result. The following flow rates are set during commissioning: Permeate 600 l/h, concentrate 200 l/h, corresponding to a yield of 75%. 3. permeate tank and ozonisation: The unpress ...

Overview  This complete PET bottling line was manufactured between 2000 and 2012 by a group of reputable European manufacturers. The line is suitable for still and carbonated soft drinks and includes a blow moulder with compressed air generator, rinser/filler/capper, labeller, packer, palettizer, stretcher, conveyors inspection systems, mixing- and CIP-unit. The line reaches up to 8,000 bph at 1,5 l and is available promptly. All machines are well maintained and include original components and relevant peripheral equipment. Technical data  Capacity: 8,000 bph at 1,5 l  Formats: 0,5 l and 1,5 l bottles Filling product: Water and carbonated soft drinks Closure system: Plastic screw caps Sport caps Packing: Shrink pack: 3x2 formation at 0,5 l and 1,5 l PET bottles Pallet type: Euro (1,200 x 800 mm) Düsseldorfer (600 x 800 mm) Scope of Delivery  Blow moulder: SIPA, year 2002 Compressed  ...

This 4-axis SCHÜCO Profilbearbeitungscenter 299 650 was manufactured in 2004. It features a powerful 21 kW motor and operates at a voltage of 380 V. With a maximum operating pressure of 0.8 MPa and a weight of 5,000 kg, this machine is designed for robust performance. If you are looking to get high-quality machining capabilities, consider the SCHÜCO Profilbearbeitungscenter 299 650 universal machining centre we have for sale. Contact us for further details.

Urban AP-B 4000 ProfilbearbeitungszentrumYear of manuf. : 2016 Control : Heidenhain TNC620 Movement X/Y/Z : 4100/420/300 mmTool holder : SK40 ____________Description:In general:Model:AP-B 4000 Automatic Profile Machining CenterMachining length:4,000 mmTravel ranges X/Y/Z:4,100 / 420 / 300 mmMachine cover:Pneumatically operated, opens upwardControls:Operator terminal can move along the machineControl:Heidenhain TNC 620 CNC controlAdditional control:Heidenhain HR130 handwheelTable specifications:Size 16 T-slots, mounted longitudinally to the X-axisWorking surface:4,200 x 420 mmSpindle:Motor power:14 kW S1 / 19 kW S6Motor cooling:Water with additiveSpeed range:100 to 14,000 rpmTorque:74 Nm S1 / 100 Nm S6Drilling capacity in St 60/aluminum:25 mm/30 mmThread size in St 60/aluminum:M20/M30Tool magazine:Tool holder:SK 40Tool clamping system:Spring-loaded clamping system with 9 kN clamping ...

: neu : ca. 8 Wochen ab Auftragse : Türkei : 31080 € : 593.63 € : 0.4 - 3 mm : 400 mm : 1200 mm² : 80 mm : 75 m/min : 10 m/s² : 10 Nm helical gear boxWATTDRIVE (Made in Austria) FESTO pneumatic equipment servo drive and control SIEMENS 7", colour touchscreen SIEMENS 2 driven rolls OPTIONAL EQUIPMENT Handrwheel and Simlinx remote control € 4.290,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Wochen ab Auftragse : Polen : 2095 € : 1 : 1 : 21 mm : 60 ° : 2820 U/min : 1.1 kW : 20 kg portable bevelling machine for processing plates and pipes integrated milling head with 10 square TCT inserts one universal guide plate for bevelling both plates and pipes continuous angle adjustment anti-vibration system for comfortable operations induction motor with increased start-up current pipe bevelling adjustmen: 150 - 300 mm 260 - 600 mm (optional) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 2595 € : 12 mm : 19 mm Weldon : 0.4 kW : 361 mm : 238 mm : 352 mm : 145 kg : 12 mm : 36 mm : 50 mm : 70 mm : 260 U/min : 6 mm This special design battery-operated drilling machine equipped with permanent magnetic base is dedicated to operate in remote areas, where no power supply is available. The base includes very strong neodymium magnets and does not require any electricity to operate. PRO-36 PM Battery is equipped with LED monitoring system that generates signals in green and red colors to indicate the current status of the drill and provide safety information. The drill can be used with convex (min diameter - 80 mm) and concave (min diameter 1000 mm) materials. Up to 47 holes fi 20 mm in 10 mm thick plate can be made when PRO-36 PM Battery is equipped with CAS LiHD 10.0 Ah battery pack. Features and benefits: • LED interface flashes gr ...

: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 595 € : 12 mm : 19 mm Weldon : 0.1 kW : 175 mm : 250 mm : 312 mm : 10 kg : 12 mm : 36 mm : 51 mm : 70 mm : 350 U/min The PRO-36 makes holes up to 36 mm in diameter by using annular cutters. The machine can also drill holes up to 12 mm in diameter by means of twist drill bits with Weldon shank 19mm (3/4’’). Compact design and excellent ratio weight/power make this mag drill a very popular choice for customers. Features &, benefits: • Dual bars guide system ensures extraordinary stiffness and adjustment free operation • Compact size and ultra-lightweight - ideal for site work • Rugged one piece slide and gear box for extra stability • Purpose designed motor with heavy duty gear box • Maintenance-friendly design makes it easy to use • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials • Magn ...

: gebraucht : 2468D : prompt, Zwischenverkauf v : Deutschland : 2970 € : 1 : 1890 € : 195 kg : 28 mm DEMO SET / MINT CONDITION consisting of: 1x accessories car (Delivery is galvanised) 4x angle stop 350 x 20 mm 4x adjustable angle stop 250 x 20 mm 15x Adjustment clamp 4x Multi-clamp 6x Stand angle, adjustable 175 x 20 mm 2x Stand angle, adjustable 225 x 21 mm 8x Stop rail 225 x 20 mm 10x Socket bolt 15x Plug holder 3x Ball Tension Bolt 4x Claw clamping bolt 28 x 100 mm 15x Spacer ring The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.