pro used for sale

Krones Variopac Pro FS 45 Type: Film only Output: 45 cycles/min. Year of Make: 2008

Transducers, power transducers, active power transducers, analog-to-analog converters, frequency-to-analog converters, frequency dividers, isolation converters, signal converters -Manufacturer: Weidmüller, Signal converter 8795890000 -Type: WAS5 PRO Bridge -Price: per piece -Quantity: 9 pieces -Dimensions: 95/15/H110 mm -Weight: 0.1 kg/piece

pneumatic piston pumps, airless high pressure pump, air motor, AIR MOTOR, paint pump -Roles with: Airles technology (without rollers) -Piston pump manufacturer: Wagner -Type: professional scooter -Material volume: max. 1.8 l/min -Max. Pressure: 12 bar -Material temperature: max. 35 °C -Number: 2x pumps available -Price: per piece -Dimensions: 270/145/H225 mm -Weight: 7.1 kg

Base for press brake tool, bending tool, die, bottom knife, lower tool, prism tool, reversible prism, 1-piece die block for die bending machine, die tool, folding tool -Support for bending tool: from Promecam STPC 250 40 121 press brake -Length: 4200 mm -Dimensions: see drawing in the photos -Dimensions: 4200/106/H106 mm -Weight: 212 kg

Hydraulic control block for hydraulic pump, hydraulic unit, control block, hydraulic control block, control unit, control valve, servo valve -Manufacturer: Promecam, hydraulic control block from press brake Promecam STPC 250 40 121 -Control valve: Abex Denison S16-92489 / 026 20324 / S16-39303 / S26.20456 2-way cartridge valves: Bosch 0 810 060 700 -Individual components: type / number see photos -Dimensions: 875/560/H400 mm -Total weight: 204 kg

Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, booster cylinder, control block, hydraulic control block, control unit, control valve, injection valve, hydraulic valve -Manufacturer: Hoerbiger, hydraulic valve from press brake Promecam STPC 250 40 121 -Type: HE90118-B -suitable for hydraulic cylinder: ID28268 -Connectors: see photos -Number: 2x valve available -Price per piece -Dimensions: 370/170/H280 mm -Weight: 33 kg/pc.

Console, fixture, clamping angle, clamping table, clamping plate, support console -Support brackets: 2 pieces, from Promecam STPC 250 40 121 press brake -Extension table: height adjustable -Dimensions each: 1070/300/H760 mm -Transport dimensions: 1150/790/H310 mm -Total weight: 96 kg

Torch nozzles, cutting nozzles, flame cutting system, torches, oxyfuel cutting system -Designation: HSD PM -Cutting nozzle 6 - 10 mm 5 bar -Cutting range: 6 - 10 mm -Gas: propane methane -Pressure: 5 bars -Diameter: 19mm -Length: 47mm -Number: 5 pieces available -Total Cost -Total weight: 0.25kg

Base for bending tool, bending tool, die, lower knife, lower tool, prism tool, turning prism, 1-piece die block for die bending machine, die tool, folding tool -Pad for bending tool:, 3 parts -Length: 3x 1050 mm -Dimensions: see drawing in the photos -Transport dimensions: 1050/80/H100 mm -Weight: 44 kg

Indexable insert drills, high performance drills with indexable inserts, solid drills, end mills, end mills, milling cutters, indexable insert mills, end mills with internal cooling, indexable insert end mills -Finger milling cutters: indexable insert end mills with internal cooling, 8 pieces -Receptacle: Ø 32 mm -Diameter: 32 to 43 mm, see photos / parts list -Levy/Price: complete -Transport dimensions: 400/200/H60 mm -Weight: 8.7kg

Indexable insert drills, high performance drills with indexable inserts, solid drills, end mills, end mills, milling cutters, indexable insert mills, end mills with internal cooling, indexable insert end mills -Finger milling cutter: indexable insert end mill with internal cooling, 2 pieces -Receptacle: Ø 25 mm -Diameter: 25 and 30 mm -Levy/Price: complete -Transport dimensions: 210/70/H40 mm -Weight: 1.0kg

Indexable insert drills, high performance drills with indexable inserts, solid drills, end mills, end mills, milling cutters, indexable insert mills, end mills with internal cooling, indexable insert end mills -Handover: in current condition as seen -Reversible plate: 1 piece missing -Finger milling cutter: indexable insert end mill with internal cooling -Receptacle: Ø 30 mm -Diameter: 16mm -Dimension: 133/40/H40 mm -Weight: 0.4kg

Suspension clamp, helmet rail holder, helmet rail, running rail, rail holder, clamping sleeve, sliding gate sleeve Manufacturer: Helmet, helmet rail -Type: Profile 500 -Length: 250 mm -Dimensions: see photos -Quantity: 122x helmet rails available -Price: per piece -Minimum order quantity: 2 pieces -Dimensions: 250/65/H60 mm -Weight: 1.3 kg/pc.

Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: Schuma, belt conveyor with base frame, height adjustable and tiltable -Type: EU 4000/400GL -Speed: 7 m/min -Belt width: 400 mm -Conveyor length: 4000 mm -Drive: 0.12 kW, see photo nameplate -Transport dimensions: 4070/480/H1050 mm -Weight: 99 kg

Suspension clamp, helmet rail holder, helmet rail, running rail, rail holder, clamping sleeve, sliding gate sleeve, clamping sleeve, sleeve -Manufacturer: Helmet, rail holder with folding bracket -Type: HL width 80 mm / profile 300 -Dimensions: see photos -Number: 1x holders available -Dimensions: 335/180/H115 mm -Weight: 5.1 kg

Suspension clamp, helmet rail holder, helmet rail, running rail, rail holder, clamping sleeve, sliding gate sleeve, clamping sleeve, sleeve -Manufacturer: Helmet, rail holder with folding bracket -Type: HL width 80 mm / profile 300 -Dimensions: see photos -Number: 4x holders available -Price: per piece -Dimensions: 250/180/H115 mm -Weight: 5.4 kg/piece

grinding length: 1025 mm grinding width: 520 mm workpiece height: - mm Control: SINUMERIK 840 D tool taper: HSK-A 63 A - axis: + 110 / - 5 ° workpiece weight: 30 kg distance grinding spindle - table min./max.: 473,5 - 1023,5 mm x-axis: 520 mm y-axis: 550 mm z-axis: 1000 mm V-axis: 166 mm feed x-axis: 4 - 6.000 mm/min feed y- axis: 4 - 4.000 mm/min Feed z- axis: 30 - 25.000 mm / min. table dimensions: 1.400 x 874 mm spindle speeds (infinitely variable): 0 - 12.000 U/min power capacity - grinding motor: 35,00 kW grinding wheel diam. min/max.: 100 / 300 grinding wheel width: 60 mm total power requirement: 100,00 kW weight of the machine ca.: 11,00 t dimensions of the machine ca.: 8,60 x 7,25 x H3,80 m 5 Axis Profile grinding machine, with SIEMENS SIN840D, double dividing head (B-C axis), V-axis (coolant nozzles), EROWA tool changing device (machine can also be operated without a tool chang ...

Manufacturer: Homag, Type: Profi BAZ/20/40/14/3/KA, Year: 2003, Control: Woodwop, Maschinensteuerung: Homag, Programming station office: möglich, Work piece width min-max mm: 1400, Min.-max. workpiece length in mm: 5200, Min.-max. workpiece height in mm: 10-60, C axis: yes, Number of milling spindles vertical: 2, Anzahl Frässpindeln horizontal: no, Milling engine 1 hours power: ca.12, U/min 1) Vertikal: 1500-24000, Milling engine 2 hours power: ca.12, U/min 2) Vertikal: 1500-24000, Number of tool changers: 2 (1 defekt), Tellerwechseler: yes, Number of tools per tool-magazine: 12, Mitfahrender Werkzeugwechsler: yes, Belt conveyor: Rollentransport, Traverse table: yes, Stops in the table front: yes, Automatische Beladung: yes, Automatschische Entladung : yes, Vacuum pumps m³/h: 100, Tool clamping system: HSK 63, Saw unit: yes, Radial arm machine: yes, Laser positioning: no, incl. to ...

Manufacturer: Brandt KDF mit Fügefräsen, Type: Profiline KDF 670, Year: 2005, Barcode: 0,5-3, Min-max edge material mm: 120-3500, Work piece width min-max mm: 10-55, Min.-max. workpiece length in mm: 10-60, Edgeband height max mm: 20, Luftkissentische Einlauf: Umstellung von 2mm auf Fase automatisch, mit Vakuum: yes, mit Klemmung: yes, Machining cracks: yes, Fine milling: yes, Application of separation agent: yes, PU-EVA: yes, Laser technology: yes, kW Leistung Laser: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Bevel milling: yes, with tool holders: yes, Nut Motore: yes, Type of scraper: yes, Number of tools per tool-magazine: yes, Number of sanding units: yes, Buffing unit: yes, Top pressure belt/roller: yes, Workpiece support: yes, Workpiece return: Rolle, Return type: yes, System dismantled: ca. 6700, FREE TEXT: ZHR 01, : ink Rückführung/ Verfügbarkeit ca. ab Jul ...

Manufacturer: Weeke, Type: BHC 600 Profiline, Year: 2003, Control: Weeke, Working range X: 9.000, Working range Y-axis: 1.790, Working range Z: 370, C axis: yes, Work piece width min-max mm: 1.300, Min.-max. workpiece length in mm: 7.250, Min.-max. workpiece height in mm: 100, Feeding speed max m/min: 80, Pendulum processing: yes, Number of milling spindles vertical: 1, Tool adaption system: HSK 63, Milling engine 1 hours power: 12, Number of tool changers: 2, Tellerwechseler: 2, Number of tools per tool-magazine: 8 + 18, Mitfahrender Werkzeugwechsler: yes, Vertical drills-X: 10, Drill vertical Y: 10, Horizontal drills-X: 3, Drill horizontal Y: 3, Number of tables: 2, Traverse table: yes, 2 station allocation: yes, Saw unit: yes, Laser positioning: yes, Year :2003

Manufacturer: Proteus, Type: 2 K und Wasserbasierende Mischanlage, Year: 2005, 2 K Mischanlage: yes, Steuerungsanlage für Mischverhältnisse: yes, Füllstandsüberwachung: yes, Wasserbasierend Lacke: yes, 2K-Lacke möglich: yes, Durchflussbereich l/min: 0,8-3,0, Kolbenpumpen gesamt: 4, Kolbenpumpen 1: 30-150, Übersetzungsverhältnis 2: 30:1, Volumenstrom Doppelhub ccm 2: 150, Kolbenpumpen 2: 3 Stück , Übersetzungsverhältnis 2: 30:1, Volumenstrom Doppelhub ccm 2: 150, Luftverbrauch bei 6 bar: yes, Schallpegeldruck db/A: 69, Laquer system - airless: yes, FREE TEXT: ohne Pistolen, Year :2005

table length: 1500 mm table width: 1500 mm table height: 200 mm weight of the machine ca.: 750 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

KNAPP AD 410 Profi T -used-WIGO planing shaft, planed cast iron tables, joint opening dressing tables, table opening to the rear, stepless feed---------- Technical data ----------planing width: 410 mm, table length: 1,700 mm, number of knives: 3 pieces, swivel range dressing stop: 45 Â, passage height: 230 mm, feed speed: 6-12 m/min., extraction nozzle: 120 mm, motor power: 4 kW, weight: 460 kgQuality info: - dressing tables adjusted- pull-in and pull-out rollers checked

Circular Saw Milling Machine KNAPP KFS Profi T -used-format sliding carriage, with boom table, circular saw swivel, angle mitre stop, milling machine swivel, milling spindle with right-counterclockwise rotation, finely adjustable milling stop---------- Technical data ----------Format sliding table Cutting length: 2,000 mm, cutting height: 103 mm, cutting width: 700 mm, max. saw blade Ã: 315 mm, swivel range circular saw: 45 Â, milling spindle diameter: 30 mm, swivel range milling machine: 45 Â, milling machine speeds: 2,850, 4,000, 7,800 rpm,

Overview This returnable glass bottling line consists mainly of equipment from KRONES and selected components from other established European manufacturers such as Hormes, RINK and HEUFT. The line is designed for a nominal output of 33,000 bottles per hour and includes the main process steps from depalletizing to palletizing.  The labeling machine will be completed according to the buyer’s requirements, allowing the line concept to be adapted to the intended bottle and product portfolio. The line is suited for returnable glass beverage applications. Based on the listed machines, the line is structured for crate handling, bottle washing preparation, empty bottle inspection, high-capacity filling/capping and returnable crate repacking. For bottles with screw caps, the RINK machine can be used upstream of the bottle washer; for crown cork bottles, an additional format set is required as  ...

General SKU360U949 MakeÄktaprocess LocationBarneveld CEcheck Main Features MaterialStainless steel Motor0.37 KW Specified Features - Miscellaneous filter MaterialStainless steel Miscellaneous filters Motor0,37kW, 220-240/380-420Volt, 1370rpm Capacity6Ltr/h Information No.29000032 Year of construction2011 Mounted on wheelscheck Floor space1,7x0,90 m Total height1,64 m Weight370 kg Extra SpecificationsMax system pressure 6 bar at 40°C, 3 bar at 60°C, pneumatic supply 3-6 bar, max power 1500 VA, 230 volt, with B&:R touchscreen display, stainless steel keyboard, Lewa pump unit, type EEC0000-13, cap. 6 ltr/hour, Endress+Hauser flowmeter Miscellaneous filtersAKTA ProcessFilters > Miscellaneous filtersBrand > AKTA Process What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination world ...

Manufacturer: Weeke Model: Profiline ABL 220 Year of Manufacture: 2008 Type of Machine : CNC drilling machine with fitting units CE Certified: Yes Electrical Specifications - Operating Voltage: 400 V / 50 Hz - Power: 24 kW - Current: 50 A - Control Voltage: 24 V DC - Workpiece Dimensions - Length: min. 250 mm / max. 2400 mm - Width: min. 240 mm / max. 850 mm - Thickness: min. 12 mm / max. 60 mm The machine processes rectangular workpieces made of melamine-coated chipboard and similar panel materials. Machine Performance - Machining capacity: approximately 300 to 350 furniture frames per 7.5-hour working shift. - Axis Speeds: - X-axis: 80 m/min - Y-axis: 80 m/min - Z-axis: 20 m/min - Drilling Unit - V18 High Speed 7500 - Configuration: 18-spindle vertical drill unit (CONFIG-V18) - Spindle Speed: 1500 to 7500 rpm (variable speed controlled) - Direction of Rotation: Right / Left - ...

Size: 520 x 840 mm Equipments: flat pile feeder FI-52 with TREMAT Station I with 6 folding pockets 1.TI-52 Station II with 4 folding pockets 2.TI-52 Noise reduction hoods Mobile delivery SAK-56

BREADING MACHINE MAREL TOWNSEND FURTHER PROCESSING B.V., MODEL: TRM 630 Technical description: Marel Townsend Further Processing B.V. rolling machine. Model TRM 630 Type 472640 Serial number 10096047 Plastic belt, belt width: (2x) 630mm Total dimensions: 2050mm x 1300mm x 2100mm

table length: 3000 mm table width: 1500 mm table height: 200 mm bore: 28 mm Special item: The holes in the bottom row of the side panel do not fit or fit only partially. This affects approx. 45 holes. Signs of wear in the plasma nitriding Features: - Holes in the surface in a diagonal pattern - Holes in the side panel in a diagonal pattern - 6 feet – standard configuration 650 mm - Through-hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 – 27 mm - Side panel made of high-quality steel S355J2+N + plasma nitriding - Hole Ø 28 mm - Corners, edges and holes rounded - Side panel height 200 mm - Includes scale markings on the surface - Construction reinforced with ribs - Grid lines enable precise set-ups The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Wochen ab Auftragse : Polen : 7390 € : 142.63 € : 1 : 1 : 14 mm : 30 ° : 9 U/min : 6 - 40 mm : 55 mm : 100 mm : 2600 mm/min : 2.2 kW : 589 mm : 541 mm : 320 mm : 65 kg bevelling machine designed to mill plates and pipes made of carbon steel, alloy steel, stainless steel or aluminum alloys bevelling of lower edge in inverted position standard shearing cutter for processing stainless/alloyed steel reversible spindle against stuck milling tool STANDARD SET ABM-14 beveller milling cutter for stainless steel cutter extraction tool tube bevelling shaft tube bevelling washer flat wrenches: 12 - 13 mm, 18 - 19 mm, 24 - 26 mm hex wrenches: 5 / 6 mm user manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mm table width: 1500 mm table height: 200 mm bore: 28 mm Special item: Hardness not achieved and a blemish on the surface Specifications: - High-quality S355J2+N steel + plasma nitriding - Material thickness approx. 24.5–27 mm - Hole diameter 28 mm - Surface hole pattern 100x100 mm grid - Corners, edges, and holes rounded - Side panel height 200 mm - Hole spacing on side panel 50 mm - Includes scale markings on the surface - Construction reinforced with ribs - Grid lines enable precise setups - 6 feet - Standard configuration 650 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 31620 € : 603.94 € : 0.4 - 2 mm : 600 mm : 1200 mm² : 80 mm : 75 m/min : 10 m/s² : 10 Nm helical gear boxWATTDRIVE (Made in Austria) FESTO pneumatic equipment servo drive and control SIEMENS 7", colour touchscreen SIEMENS 2 driven rolls OPTIONAL EQUIPMENT Handrwheel and Simlinx remote control € 4.290,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Cesare Quaranta Model: Mya Pro Year of Manufacture: 2023 Accessories: 16 pads + mat Applications: Weight loss, circumference reduction, skin tightening, cellulite treatment Technology: Combination of ultrasound, EMS (electrical muscle stimulation), and heat Condition: Well-maintained and fully functional Find more here - / Contact us at -

max. workpiece length: 3740 mm profile spindle: 1 Stück main drive: 15 kW Control: CNC Felder Format4 Type Profit H500S 16.38 CNC Machining Center to be sold on behalf of our customer ------------------------------------------------------ - From a wood window manufacturing company. - Machine still connected and ready for demonstration - Without machining tools Technical description (summary, full text see PDF): ------------------------------------------------------ Working dimensions: X = 3,740 mm Y = 1,570 mm Z = 350 mm clearance height (from console level), depending on clamping system, see layout. Travel: X = 4,930 mm Y = 1,925 mm Z = 500 mm Axis positioning speed: X = 80 m/min Y = 80 m/min Z1 = 30 m/min Z2 = 20 m/min - 5-axis milling spindle: 15 kW HSK F63 with liquid cooling, 1,000 - 24,000 rpm - Additional C-axis locking - Drilling head DH 18 6H1S: Vertical drilling unit with 12  ...

Overview This roll-fed hot glue labelling machine was manufactured by ACMI (Italy). The Opera PRO 400 RF is designed for high-capacity beverage production lines, processing both cylindrical and shaped containers in glass or PET. It applies wrap-around OPP labels at very high speeds, ensuring excellent efficiency and reliability. The machine is equipped with modern features such as automatic label splicing, brushless motor-driven infeed screws, and remote assistance capability. It is currently available for sale. Technical data  Capacity: Nominal 48,000 bph (max. mechanical speed: 58,000 bph) Formats: Cylindrical and shaped containers, PET or glass, e.g. 500 ml PET round bottle (wrap-around OPP label) Machine diameter: 1,320 mm Pitch: 125.60 mm Label type: Roll-fed OPP hot glue wrap-around labels (30–40 µm thickness, 30–175 mm height) Platform rotation: Motorized belt (R version) Ma ...

: neu : ca. 6-8 Wochen ab Auftrag : Polen : 16980 € : 326.02 € : 1 : 66 mm : 60 ° : 300-800 U/min : 0 - 1,2 mm/min : 6 mm : 6.5 kW : 1179 mm : 853 mm : 1524 mm : 320 kg portable auto-feed bevelling machine real time measurement and on-screen display double-sided bevelling variable spindle speed milling head including 8 replaceable inserts remote control panel with LCD display max. bevel width: 66 mm at 15° 52 mm at 30° 50 mm at 45° 51 mm at 60° The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Türkei : 28390 € : 542.25 € : 0.4 - 3 mm : 300 mm : 900 mm² : 80 mm : 75 m/min : 10 m/s² : 10 Nm helical gear boxWATTDRIVE (Made in Austria) FESTO pneumatic equipment servo drive and control SIEMENS 7", colour touchscreen SIEMENS 2 driven rolls OPTIONAL EQUIPMENT Handrwheel and Simlinx remote control € 4.290,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dough divider and rounder Fortuna Primus Pro 6 Year of Make: 2015 Condition: cleaned and tested 6-row head machine Hopper volume: 40 kg Maximum hourly output: 9000 pieces Weight range: 40-100g Touchscreen control with recipe memory With flour and pressure roller at the outlet Adjustment of the weight and the effective chamber height via hand crank Machine on rollers, mobile with brake

Capacity: 15 - 70 kg/h; Briquette diameter: 60 mm; Automatic start-up: Yes; Oil Preheating System: Yes; Material moisture: max 15%; Container size: octagonal, diameter 750mm; Hopper height: Dimensions: 1500mm x 900mm x 1065mm (L x W x H); Motor power: 5.5 kW; Control cabinet: electronically controlled via PLC; Weight: 450 kg;

Capacity: 15 - 55 kg/h; Briquette diameter: 55 mm; Container size: octagonal, diameter 750mm; Hopper height: Dimensions: 1500mm x 900mm x 1065mm (L x W x H); Motor power: 4 kW; Control cabinet: electronically controlled via PLC; Weight: 450 kg; The Nano briquette press is ideal for companies with small production. Due to the compact design, it is also possible to mount the press under an existing extraction system without great effort.

power: 40 - 100 kg/h; briquette dimensions: 60 mm; briquette length: 40 - 70 mm; automatic start-up: yes; oil preheating system: yes; max moisture: 15 %; container diameter: 1000 mm; dimensions: 1850 mm x 1170 x 1510 mm (LxBxH); motor power: 7,5 kW; power panel: with PLC and touch screen Siemens; weight: 770 kg; The briquetting machine is suitable to compact: wood cork rubber plastic yarn fluff natural fibre emery powder scrapings from hides paper coffee husk etc.

Key data: 30 KW

Technical data: Manufacturer: Renner Type: RSF-Pro 30 Year of manufacture: 2023 Control: Frequency Controlled Air capacity: 5,600 l/min Operating pressure: 10 bar Rated power: 30 kW Sound level: 69 dB (A) Dimensions and weight Dimensions L/W/H: 1,400 x 830 1,640 mm Weight: 850 kg Condition Condition: Used Functional: Tested and fully functional

TECHNICAL SPECIFICATION   max. diameter of saw blade: 460 mm   cutting capacity round: 146 mm   cutting capacity square: 138 mm   mitre cutting: no   .. oblong: 250 mm   .. .. x: 100 mm   .. to: 220 mm/min DIMENSIONS / WEIGHTS   space requirements -left/right-: 2200 mm   space requirements -front/back-: 1950 mm   total height: 2000 mm   total weight approx.: 2700 kg High-performance automatic saw for cutting aluminium and non-ferrous metal profiles to length in 90° cuts. With feed conveyor and discharge / vibrating section and extraction system. - max. profile width / height to be processed: 250 / 148 mm - Min. profile width / height to be processed: 10 / 20 mm - Cut-off lengths from 10 mm - Saw blade motor 12/18.5 KW, S6 60%

: neu : ca. 6 Monate ab Auftragse : Taiwan : 62000 € : 1171.8 € : 3100 mm : 2 mm : Hydraulisch : 135 ° : 5 kW : 4370 mm : 1770 mm : 1790 mm WITH VERTICAL UPPER BEAM MOVEMENT FOR THE USE OF FLAT AND HIGH TOP RAILS hydraulic driven NC control for bending angle manual back gauge 600 mm sharp flat upper rail 45° (in one piece) mechanical crowning adjustment clamping force adjustment upper beam vertical according to CE rules Optionen: sectionet upper rail, height 100 mm motorized back gauge, 800 mm with 2-axis touch control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6-8 Wochen ab Auftrag : Polen : 26880 € : 513.41 € : 1 : 1 : 30 mm : 60 ° : 500-2920 U/min : 50 - 150 m/min : 3 mm/min : 100 mm : 7.5 kW : 1216 mm : 1275 mm : 850 kg continuous adjustment of spindle speed and feed rate make it suitable for different types of steel and aluminum high speed rotary milling head equipped with 10 inserts cutting inserts for various materials 3D contact wheel control for proper workpiece alignment ergonomic ball roller bench swarf drawer BASIC SET: SBM-500 stationary bevelling machine set of tools user manual in ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Format 700 x 385 - 140 x 210 mm Speed : up to 6000 A4 sheets/h Up to 9 creases and 2 folds per document

Description Konica bizhub PRO C1060 Used device Machine number: 1819287410 Meter reading as of 02.11.2022: 00942571 from 12-2015 Controller option VI-507 Interface Kit for EFI Fiery IC-308 / IC-415 Print processing IC-415 EFI Fiery integrated print controller bizhub GPRS modem incl. SIM (KPN) Interface to remote maintenance system via mobile radio, modem incl. SIM card f DF-626 Automatic original feeder Paper input PF-707 Large capacity magazine with suction system technology Finishing FS-532 All-In-One-Finisher RU-509 Cooling/smoothing unit Konica bizhub Pro C1060-tech data

General SKU098F495 MakeProvatech GmbH (Waldner) TypeVakuum Trockenschrank VTP 700/930 Ex Year of construction1997 LocationBarneveld Pressure Working pressure0.025 Bar Vacuum possiblecheck Working pressure jacket0.5 Bar Main Features MaterialStainless steel Volume260 Ltr. Surface1 m2 Specified Features - Tray dryer Tray dryercheck Stainless steel housingcheck (1.4571) Stainless steel trayscheck Mirror polished Heating surface1,0 m² Drying chamber capacity260 Ltr Drying chamber sizes700x445x930mm Max. temperature80°C. With jacket27 Ltr. Max. temperature80°C. Number of trays4 (+ bottom) Tray sizes500x400mm Distance between the trays150mm With 1 doorWith electric (water) heating Connection for the vacuum pumpcheck With vacuum pumpcheck make SIHI Motor± 0,25 KW MaterialStainless steel 1.4571 (316Ti) Information With switchcheck (as is) Floorspace1,9x1,2  ...

CONTROLS   CNC controls WORKING RANGE -WIRE CUTTING-   X-axis travel: 500 mm   Y-axis travel: 350 mm   z-axis travel (vertical): 426 mm   conical operation for max.: 30 °   U-axis travel: 140 mm   V-axis travel: 140 mm WIRE SYSTEM   wire diameter (min): 0.15 mm   wire diameter (max): 0.33 mm ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 1940 mm   space requirements -front/back-: 2300 mm   total height: 2600 mm   total weight approx.: 4200 kg