printing press used for sale

Mitre saw, saw unit right left, double mitre saw, crosscut and mitre saw, double end tenoner -Manufacturer: Emmegi, Pressta Eisele, double mitre saw type SINGLE 2 HM500 -Cutting length: 250 to 5000 mm -Saw units: 45° pivotable -Saw blade: Ø 500 mm -Cutting data 90°: Cutting height 350 mm Cutting width 160 mm -Cutting data 45°: Cutting height 260 mm Cutting width 125 mm -Dimensions: 5750/1220/H1700 mm -Weight: 1200 kg

Hydropneumatic mode of operation Punching force: 50 kN Working stroke: 35 mm Projection: 110 mm Installation height: 140 mm

Offer 26051 Technical data: - Feed of the milling unit manually - Work table adjustable in height via handwheel - Horizontal and vertical material tension - Milling cutter diameter up to 300 mm - max. Milling height 150 mm - max. Milling depth 110 mm - max. Milling length 500 mm - Angle-adjustable stop Li + Re 20 - 90 ° - Milling spindle speed 2800 rpm - Drive 400 V 2.2 kw - Compressed air connection 6 - 8 bar - Air consumption per work cycle 10 l - Pneumatic profile clamping - Spraying device - Space requirement approx. W 1300 x H 1450 x D 1100 mm - Weight approx. 300 kg

Offer 26050 Univ. notching sawing machine Technical data: - Saw blade dimensions - vertical 400 x 3.5 x 40 mm - - horizontal 400 x 3.5 x 40 mm - Notching area / notch depth vertical 135 mm - Notching area / notch depth horizontal 105 mm - Notching width at 90° to 280 mm - Notching width at 30° to 100 mm - Vertical saw blade manual 90° - 30° swivel via handwheel - Use as a Schiftersäge without horiz. Saw blade possible - Profile stop shoulder can be swivelled 30° - 90° - 30° - Pneumatic material vise - Coolant spray device - Air connection 6 bar - Drive 400 V / 2 x 2.2 kW / 2800 rpm - Space requirement approx. W 2200 x H 1600 x D 1400 mm - Weight approx. 800 kg

Manufacturer: Presona Model: LP100 CH2S Year of Manufacture: 2008 Type of Machine : Bailing Press Press Force: 100 tons (1000 kN) Specific Press Force: 81 N/cm2 Max Oil Pressure: 25 MPa Feed Opening: 1650 mm (W) x 1100 mm (L) Bale Cross-Section: 1100 mm (W) x 1100 mm (H) Throughput Capacity: 660 m3/h Output at 30 kg/m3 bulk density: approx. 17-20 tons/h Output at 50 kg/m3 bulk density: approx. 20-24 tons/h Output at 100 kg/m3 bulk density: approx. 22-33 tons/h Drive Power: 2 x 45 kW Hydraulic Tank: 2000 litres Vertical Wire Tying: 5-fold Machine Weight: approx. 32 tons Color: RAL 5015 / RAL 1023 Included Equipment - Oil heater, large digit display, 10 wire frames, turbulator, adjustable support feet. - Applications - Plastic film baling - Paper and newspaper compacting - Cardboard and corrugated baling - Mixed recyclables processing - Waste management and recycling fac ...

TECHNICAL SPECIFICATION   max. diameter of saw blade: 460 mm   cutting capacity round: 146 mm   cutting capacity square: 138 mm   mitre cutting: no   .. oblong: 250 mm   .. .. x: 100 mm   .. to: 220 mm/min DIMENSIONS / WEIGHTS   space requirements -left/right-: 2200 mm   space requirements -front/back-: 1950 mm   total height: 2000 mm   total weight approx.: 2700 kg High-performance automatic saw for cutting aluminium and non-ferrous metal profiles to length in 90° cuts. With feed conveyor and discharge / vibrating section and extraction system. - max. profile width / height to be processed: 250 / 148 mm - Min. profile width / height to be processed: 10 / 20 mm - Cut-off lengths from 10 mm - Saw blade motor 12/18.5 KW, S6 60%

General SKU039E129 MakeRichard Stihler No.5057 Year of construction1963 Mounted on legscheck Pressure Working pressure2 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume4480 Ltr. Pressure2 Bar Vacuumcheck Specified Features - Pressure vessel MaterialStainless steel 1.4571 (316Ti) Capacity4480 Ltr Vessel sizesdia. 1800x1200mm Dished topcheck Dished bottomcheck Manholedia. 500mm Top connections(6x) Outletdia. 100mm Max. temperature50 Degr. C. Information LocationBarneveld Floorspace1,8x1,8 M Total height2,8 MDiscountPressure vesselsRichard StihlerDiscountTanks > Pressure vesselsBrand > Richard Stihler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barnevel ...

General SKU011U240 MakeHanag AG Oberwil No.111094 Year of construction1995 LocationBarneveld Pressure Working pressure16 Bar Vacuum possiblecheck Working pressure jacket16 Bar Vacuum possible jacketcheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume3560 Ltr. Pressure16 Bar Vacuumcheck Specified Features - Pressure vessel MaterialStainless steel 1.4435 (316L) Capacity3560 Ltr Vessel sizesdia. 1200x2600mm Dished topcheck Top connections4x dia. 80mm Outlet2x dia. 80mm + dia. 100mm + dia. 200mm Max. temperature-30/+120 Degr. C. Half coil jacketed(80 Ltr) Information Weight1900 KGDiscountPressure vesselsHanag OberwilDiscountTanks > Pressure vesselsBrand > Hanag Oberwil What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You ar ...

General SKU011U177 MakePaul Schwingel No.8183-3 Year of construction1986 LocationBarneveld Pressure Working pressure3.2 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume23120 Ltr. Pressure3.2 Bar Vacuumcheck Specified Features - Pressure vessel MaterialStainless steel 1.4571 (316Ti) Capacity23.120 l Vessel sizesdia. 2400 x 4000mm Dished topcheck Dished bottomcheck Manholedia. 600mm Top connections6x dia. 100mm + 2x dia. 150mm Outletdia. 150mm + dia. 100mm Max. temperature65 °C Information Floorspace2,8 x 2,8 m Total height5,5 m Weight4800 kgDiscountPressure vesselsPaul SchwingelDiscountTanks > Pressure vesselsBrand > Paul Schwingel What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome  ...

General SKU082C465 MakeEisen- und Hüttenwerke Thale AG No.60 6731 Year of construction1996 LocationBarneveld Material Lining materialGlass - Enamel Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Number of vertical pressure tanks1 Main Features MaterialGlass Volume2350 Ltr. Pressure6 Bar Vacuumcheck Specified Features - Pressure vessel Capacity2350 Ltr Vessel sizesdia. 1400x1200mm Dished topcheck Dished bottomcheck Manholedia. 500mm Top connections(5x) Outletdia. 80mm Max. temperature200 Degr. C. With jacket(300 Ltr) Information Floorspace1,6x1,6 M Total height2,5 M -- VESSEL HAS NEVER BEEN USED -- Weight2150 KGDiscountPressure vesselsThaleDiscountTanks > Pressure vesselsBrand > Thale What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Rea ...

General SKU065Y550 MakeFIB Leeuwarden No.1326-05 Year of construction1982 LocationBarneveld Pressure Working pressure5 Bar Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume1200 Ltr. Pressure5 Bar Specified Features - Pressure vessel MaterialStainless steel 1.4401 (316) Capacity1200 Ltr Vessel sizesdia. 1000x1100mm Dished topcheck Dished bottomcheck Manhole/hand hole dia. 200mm Top connections4x dia. 25mm + dia. 65mm Outletdia. 80mm Max. temperature100 Degr. C. With paddle stirrermake Veenstra, type FR-200 Motor2,0 KW, 220/380 Volt (Ex) With variable speed drivecheck Information Floorspace1,5x1,5 M Total height3,3 M ATEX compatiblecheckDiscountPressure vesselsFib LeeuwardenDiscountTanks > Pressure vesselsBrand > Fib Leeuwarden What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new ...

Max. basket weight:50 kg Temperature for washing water:0-60 °C Electrical heating power:2 kW Rated power supply:230 V Machine size LxWxH:600x800x1650 mm Machine weight:90 kg DIMENSIONS DxWxH 600x800x1650 mm POWER SUPPLY 230 V DETERGENT water PUMP POWER 1.2 kW TANK CAPACITY 100 l LOAD CAPACITY 50 kg HEATING ELEMENTS POWER 2 kW HEATING TEMPERATURE 0-60° WORKTOP DIMENSIONS 750x550 mm WEIGHT 90 kg

General SKU232M159 MakeTop Industrie F-77 013 Vaux Le Penil Type1876 0000 Reactor cristallisation CO2 No.1449 Year of construction2007 Mounted on legsin framework Pressure Working pressure350 Bar Main Features MaterialStainless steel Volume0.1 Ltr. Motor0.25 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity0,094 Ltr Vessel sizesdia. 114x145mm With jacketcheck Max. temperature150°C Motor0,25 KW, 400 Volt Stainless Steel Reactors MaterialStainless steel 1.4404 (316L) Information LocationBarneveld With switchgearcheck Floorspace1,0x0,6M Total height1,0M Weight130 KGCatalysts & fillersStainless Steel ReactorsSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsLubricants & oleoSolid pharmaceuticsDyes & pigmentsAPIMinerals & inorganicPlastic & polymersAgrochemicalsRubberOther chemicalFine chemicalsOintmentsGeneric medicinesPaints & coat ...

General SKU001A039 MakeUHDE Hagen No.2578 Year of construction1978, Internal coil built in 1991 Mounted on legscheck Pressure Working pressure300 Bar Main Features MaterialStainless steel Volume20 Ltr. Motor0.55 KW Specified Features - Stainless Steel Reactor ReactorHigh pressure Capacity20 Ltr Vessel sizesdia. 215x600mm Dished bottomcheck Dished top sidecheck With jacket/Electric heating Internal heating spiral(0,8 Ltr) Max. temperature350 Degr. C. With anchor stirrercheck (built in 1991) Motor0,55 KW, 220/380 Volt (Ex) Speed mixing shaftvariable (± 155-1120 Rpm) Stainless Steel Reactors MaterialStainless steel 1.4306 (304L) Information LocationBarneveld Floorspace0,9x0,9 m Total height2,2 m Weight850 kg Extra Specifications- Vessel does not have a bottom outlet Catalysts & fillersStainless Steel ReactorsSolventsDiscountDetergent & surf.Other pharmaceuti ...

General SKU209W119 MakeHaagen & Rinau No.301015/4 Year of construction1998 LocationBarneveld Specified Features - Pressure vessel Material finishPolished inside Pressure Working pressure3 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume300 Ltr. Pressure3 Bar Vacuumcheck Pressure vessels MaterialStainless steel 1.4435 (316L) Notified bodyTÜV Capacity300 Ltr. ( bruto 380 ltr) Vessel sizesDia. 740x997 mm Dished topcheck Dished bottomcheck With covercheck Manholecheck DN400 Top connectionscheck OutletDN40 Max. temperature143°C Information Mounted on consolesOn wheels Floorspace0,95x1,15 m Total height2,0 m Weight360 kg Extra Specificationswith spray ball. inspection window in mannhole. SolventsDetergent & surf.CosmeticsDyes & pigmentsAPIMinerals & inorganicPlastic & polymersAgrochemicalsBiotechnology ...

General SKU004Y057 MakePressindustria S.p.A. TypeTE.3/SV/R/5 No.4302 Year of construction1983 LocationBarneveld Pressure Working pressure0.067 Bar Vacuum possiblecheck Working pressure jacket3 Bar Main Features MaterialStainless steel Volume7 Ltr. Motor0.55 KW Specified Features - Processing vessel MaterialStainless steel 1.4401 (316) Closed stirring vesselVacuum processing vessel (1x) Capacitymin. 3/max. 7 Ltr Vessel sizesdia. 250x250mm, Vessel can be lifted hydr. Dished bottomcheck Flat top sidecheck With covercheck With jacketcheck Max. temperature160 Degr. C. With anchor stirrerscraper stirrer Counter rotating stirrercheck Motor0,07/0,22 KW, 220 Volt (3 Ph) Speed mixing shaft3-60 Rpm With homogeniser(400-2000 Rpm) Motor0,2/0,55 KW Information With switchgearcheck Floorspace1,2x0,9 M Total height2,3 M Technical specs Extra informationVessel can be  ...

8 color size 1270 mm<br><br><br><br>

Qty. 1 Second-hand die cutter with flexo printing press Mfc.: M&M Mediterránea de Maquinaria Type: WRC 98 1150-1600/DISTENCO Built: 1999 Flexo printing press with 3 colours Capacity: 50,000 boxes in 1 shift Input material: cardboard of max. dimensions: 1,150 mm x 1,600 mm Output material: boxes (for pizza) Included in the scope: approximately 15 tools for different sizes of boxes New electronics The complete die cutter with flexo printer will require approximately loading on 2 trucks. The box production process is as follows: Ready-made cardboard formats are inserted into the machine, the machine prints up to 3 colours, cuts the box and sends it on with a conveyor and stacks it.

Manufacturer: Ryobi Model: 3304 H Year of Manufacture: 1999 Details: - PCS-F remote control - RP520-220 F high precision register punch - ECO15 damping system - IR dryer - Super Blue Cylinder on delivery - Total Impressions: 18,892,380 - Currently disassembled into two pieces and placed on pallets - Unused for approximately 10 years Technical Specifications: - Printing Units: 4 - Max. Paper Size: 340 × 450 mm (13.39 × 17.72") - Min. Paper Size: 90 × 100 mm (3.54 × 3.94") - Plate Size: 335 × 485 mm (13.19 × 19.09") - Max. Printing Area: 330 × 438 mm (13 × 17.24") - Printing Speed: 3,000–10,000 sheets/hour - Feeding System: Universal feeder - Delivery System: Chain delivery - Blanket Type: Aluminum bar blanket - Dampening System: Continuous (RYOBI Super Dampener) - Control: PCS-F remote control - Accessories: RP520-220 F register punch, ECO15 damping, IR dryer, Super Blue C ...

Technical data: Material width: min. 130 mm, max. 270 mm Material width: max. 244 mm Print repeat length: min. 101.6 mm, max. 254 mm Machine components: • Corona treatment • 5 × offset printing units • 1 × flexo printing unit • Flat hot foil stamping unit • Flat die-cutting unit

Manufacturer: Bobst Model: Flexo 200 Feeder type: Vacuum sheet feeder with pneumatic pressure plate Anilox rollers: All used, ceramic Printing units 1–4: 160 lines/cm, maximum feed volume 8.5 cm³/m² Printing unit 5: 100 lines/cm, maximum feed volume 10.5 cm³/m² Doctor blade system: Ceramic anilox rollers with metal doctor blade Vacuum sheet transport: Yes, 2007 vacuum transport (modified stainless steel suction plate) System upgrades: Sheet cleaning and warm air dryer, both Type 2 200 from DUO-TECHNIK; steam pressure reduction station from Helmut Herbert GmbH The running speed of the system is approximately 4,000 sheets per hour. Spare parts: ST= pieces Bezeichnung Lief.Artikelnr. Bestand BasisME Freilauf FK 24 AP BSA1101010400 2 ST Freilauf FB 44 SF BSA1101047600 2 ST Rutschnabe kplt. M. Kettenrad 16H7 Z20 RN 250M-1/KR 2 ST Reibscheibe RN 250/RS RN 250/RS 8 ST Tell ...

5-color R23847/15 PROPHETEER flexographic printing machine 18" Model: 1800 Built: 1998 available: immediately 5- Colors for labels and other products e.g. for cups / cups 18 Corona Car register Stacker Video Scanner Flat-in diameter: 1016 mm Available: immediately

Format: 740 x 1040 mm<br><br><br><br>br>Verf Gbar: Short-term

6-Colors R25476/17 ALLIED GEAR Labels Flexographic Printing Machine Model: Flexomaster Built: 1995 Availability: instantly 6 colors 6 Anilox rollers Paper cutters Lamination Transporter Power unit UV dryer Video body plate (JM Heaford) Still in operation: Yes Available: by arrangement

8-color format: 70 x 100 cm<br><br><br><><<br>Verf Gbar: Instant

4-color R23240/17 SHIKI label press Model: PC 45 M Built: 1992 Web width: 280 mm Availability: instantly 3 - coloured or 4 - coloured (optional) Printing width: 270 mm, min. 50 mm max. feed: 7, approx. 180 mm Accessories: Rolling unit for rollers up to 100 cm in diameter Winding unit for small rolls pneumatic remaline hole on both sides Speed: 7000 cycles/h max. Products: Hole edge adhesive labels, adhesive labels, hole edge cardboard labels, tickets with and without printing - can punch, print, embosse, number, perforate, punch Available: immediately

Format: 700 x 1020 mm R26060/18 SAKURAI screen printing machine Model: SCA 102 Built: 1989 max. print size: 700 x 1020 mm Availability: instantly automatic screen printing line high speed cylinder Special version: min: 500 x 350 mm Sheet transfer station can be folded on one side optical front edge control mechanical double-arch control via friction rollers pneumatic squeegee pressure control and sieve clamping PERFECTION high-performance dryer 1120/4: Inlet width 1100mm, 2 warm and 2 cooling zones with UV dryer MIRUS forklift model SV Etc. Available: immediately

8-colours web width 342.6 mm 9 printing stations, 8 for watercolours straight toothed 1 UV (glue) station redeveloped and further expanded for printing on packaging monofilm from 30" expanded and further expanded for printing on adhesive label material up to 200 Ceramic anilox cylinder, for 120/18 to 140/10 140/17, 160/15, 180/12, 95/15, 200/5, 255/10, 300/10, 315/11, 345/8, 500/17 Colouring roller for full-surface colouring Cutting device for longitudinal sections Etc. Still in operation: Yes Available: immediately

<br><br><br>Still in operation: Yes<br>Verf Gbar: Immediately

<br><br><br>Still in operation: Yes<br>Verf Gbar: Immediately

4-color format: 212 x 360 mm<br><br><br>Still in operation: Yes<br>

4-color format: 1300 mm<br><br><br>Still in operation: Yes<br>Verf Gbar: Immediately

<br><br><br>Still in operation: Yes<br>Available: immediately

<br>Original numbering work for Heidelberg MO<br><br><br>

6 color size 800 mm<br><br><br>Still in operation: Yes<br>Available: immediately

<br><br><br>Still in operation: Yes<br>Available: immediately

<br><br><br><br>Available: immediately

<br><br><br>Still in operation: Yes<br>Available: immediately

<br><br><br>Still in operation: Yes<br>Available: immediately

<br><br><br>Still in operation: Yes<br>Available: immediately

<br><br><br>Still in operation: Yes<br>Available: immediately

8 color size 70 x 100 cm<br><br><br><br>Available: immediately

size 740 x 1040 mm<br><br><br><br>Available: short term

3-color R23501/15 HOLWEG flexo printing machine model: Colorado age: 1971 available: short dated 3 printing units printing width: max. 100 cm Secare – reel rewinder Available: nach Absprache

Central printing press cylinder Print width 1270 mm Roller width 600-1310 mm Processing 1000 mm Winding 1000 mm

8-color web width 342,6 mm 9 print clambs, 8 for water colour 1 UV glue clambs for packing-Monofolie up 30µ for printing of pressure-sensitive label material bis 200µ Ceramik-Aniloxcylinder, for 120/18 bis 140/10 140/17, 160/15, 180/12, 95/15, 200/5, 255/10, 300/10, 315/11, 345/8, 500/17 Inking roller for full-size inking with cutting for slitting etc. Still in operation: Yes Available: sofort