We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
122,027 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
used
used
used
used
used
HEIDELBERG GTO 52 • Year: 1988 • Size: 36 x 52 cm • Serial: 694596 • Counter: 45.396.545 • Size: 36 x 52 cm • Bacher Register 22 cm • Speed: up to 8.000 sheet/h • checked • cleaned • new rollers Good Working Condition test possible Please ask for quotation: send us an email
used
used
E-Feeder (single Sheet) Conventional dampening bare-back dampening matt-chromed dampening oscillator rapid action clamps powder sprayer anti-static device Plus Version - gearing for numbering electronic double sheet detector, additional 380V / 400V - 50Hz GTO46: L140xB130x170cm, 1.400kg
used
Screening machine, Vibrosieb van Aarsen with a screen area of 450 x 500 mm incl. Sifters and fan as well as fine part extraction
; ready for use
used
used
used
Machine refurbished & test-printed! grey model with long electrical box standard machine ink unit completely dismantled and refurbished new ink and dampening rollers Rilsan oscillator rollers replaced with NEW ones machine fully refurbished and test-printed
used
Printing plate punch Beil 425 stand model; good condition; Punching 425mm round; with adjustable ring visor bolts; Foot pedal; Max. Plate width 97cm.; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.
used
M. No.: 821301-10002 Equipment / further information: Hardware • OptiPrint™ Media Cleaner • Driven roller feed system with media flanges • Driven reel system with media flanges • Baskets • Rear and front media sensor • Hard disk (2 GB job space) Interface • Control panel with 8 buttons. • 4x20 character liquid crystal display. • English display language. • Metric or English units. Functionality • 16 user configurations. • Automatic alignment system. • Up to eight colors/job • OptiTrac Save Ribbon • Right side of the tape • OptiTrac colors: mirror silver and gold Cut: • Concatenation and curve smoothing to achieve better cutting quality. • OptiCut drag motion optimization. • Overlap for easy weeding. • Multiple reprint function (up to 999). • Flash Eproms With 5 cassettes and various ribbons Operating instructions
used
XL wide printing plate punch ( 165 cm ) for Roland and KBA presses. 4 punching modules are installed, 425 mm and 780 mm. Additional recesses and fastenings are provided for a total of 120 cm, so that a larger format can be processed; Very good, ready to use. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.
used
Feeder Double printing Crabtree Marquess UV oven Maber Coater Oven of 27 m and 6 m of coolers New PLC control for machine Chain and wickets new New exit table Inghor New transition system Non stop stacker LTG Sizes 1140 x 960 mm.
used
used
Plate bend Ingkant SM 52; cleaned and tested; Table equipment; suitable for Heidelberg SM 52 plates. Plate bender SM 52; good condition; cleaned and checked; table top model; used for Heidelberg SM 52 plates.
used
Printing plate bending for Heidelberg SM 52 Beil PB-S 52; good condition; cleaned and tested; Stand-up device; suitable for printing plates Heidelberg SM 52. Plate bender for Heidelberg SM 52 Beil PB-S 52; good condition; clened and checked; used for Heidelberg SM 52 plates.
used
Printing plate development machine Koenings KTW 653; good condition, cleaned and tested; 3 brushes; inlet width 650mm; suitable for waterless panels. Plate processor Koenings KTW 653; good condition; cleaned and checked; 3 brushes; width 650mm; Used for waterless plates.
used
used
used
used
used
used
used
used
Plate punch HD/Nela SM 52; good condition; cleaned and tested; Table equipment; Punching 425mm Autoplate. Plate punch HD/Nela SM 52; good condition; cleaned and checked; table top machine; punch size 425mm autoplate.
used
Plate punch Beil 780 S-H-APL-CTP-p; pneumatically; Punching 780mm Autoplate; puncture 11mm; suitable for MAN 700; compressed air required. Plate punch Beil 780 S-H-APL-CTP-p MAN 700; pneumatic; punch size 780mm autoplate; depht 11mm; used for MAN 700; Need pneumatic air.
used
IRAC SR MINI EVOLUTION printing screen washing machine was built in Italy in 2017. The machine is used in the process of semi-automatic cleaning of printing screens using room temperature solvents. The offer includes: – printing screen washing machine: IRAC SR MINI EVOLUTION 1000X1000 LST (2017). – solvent distiller with air tank: IRAC ALPHA 50/R (2017) The SR MINI EVOLUTION screen washing machine is equipped with a fully programmable pneumatic control system, allowing easy management and optimisation of the machine’s working phases. Directly directed nozzles deeply clean the entire surface of the printing screen, which is then rinsed and blown off. A high level of safety in the use of the printing screen washing machine is ensured by the fully hermetic design, guaranteeing no emission of harmful fumes. The ALPHA 50/R solvent distiller is an economical and environmentall ...
used
Printing plate punch/lacquer plate punch for Heidelberg XL 145/162; good condition; cleaned and tested, perforation 1200mm autoplate. Plate punch/ plate punch for varnish plates for Heidelberg XL145/162; good condition; cleaned and checked; hole size 1200mm autoplate.
used
Printing plate development machine Agfa Elantrix 125 HX; good condition; cleaned and tested; Inlet width max.1250mm, min.200mm; Plate length max.1500mm, min.315mm; Plate thickness 0.15-0.50mm; Cooler. Plate processor Agfa Elantrix 125 HX; good condition; cleaned and checked; max plate width 1250mm, min.200mm; max.plate lenght 1500mm, min.315mm; plate thikness 0.15.0,50mm; cooling unit.
used
Offer consists of: - High-performance finisher DocuCutter DC-745 Duplo DocuCutter DC-745 High-performance finishers for digital color printing: - Investors: Suction/blowing air feeder with alignment line - Operation: via LCD display - PC included - Software included - Business card module - Job memory: 80 memory slots for retry jobs - Error avoidance: Ultrasonic double leaf control Control compartment Test running program Print mark reading - integrated knife 6x 2x Edge cut 4x for card cutting - Format: max. 650x370mm min. 210x210mm - Paper weight: 110-350g/sqm - Speed: 50 sheets/minute - Current: 230V / 50Hz / 2.7A, 550W - Dimensions: 3.040x1.020x1.115mm - Weight: 450kg On request, we can organize the following points for you: Packaging, loading, transport (by ship or plane) including customs clearance Obtaining a leasing o ...
used
Pneumatic plate punch INGEKBA Rapida 142; good condition: perforation 780mm autoplate; investment contact; compressed air required. Pneumatic plate punch KBA Rapida 142; good condition; punch size 780mm autoplate; feeder control; Compressed air needed.
used
Pad printing machine: Manufacturer: Tampomark Model: TM 85-2 C year: 2010 (ran very little) closed color system 2-colored electro-pneumatic Technical specifications: Cliché format: 100mm x 200mm Squeegee cups: W 85mm Printing format max .: 75mm Printing force: 110 kg Output: up to 1200 cycles / hour Weight: 136 kg Pneumatic connection fine filter: 6 bar Operation: Digital display with piece counter Equipment: Machine base on castors, height-adjustable cross table 2 magnetic holding plates 2 squeegee cups (including 4 new squeegee rings) 2 pad holders incl. Pneum. Pad displacement foot switch Location: germany Price: on request
used
used
used
used
used
used
used
used
Number Of Colours: 6 // Rim Diameter (Max): 208 mm
used
Reference Num.: 3742 Brand: Adast Type: Tiegel Grafopress GPC Size: 260 x 380 mm Available: directly Status: In production Location: Deutschland Sheet size: max 260 x 380 mm
used
Reference Num.: 3734 Brand: Adast Type: Tiegel Grafopress GPC Size: 260 x 380 mm Available: directly Status: In production Location: Deutschland Sheet size: max 260 x 380 mm
used
Reference Num.: 3070 Brand: Heidelberg Type: GTOZP 46 Construction year: 1978 Impressions: 97 mio Size: 320 x 460 mm Available: directly Status: In production Location: Deutschland Sheet size: min 105 x 180 mm, max 320 x 460 mm Printing speed: max 8,000 sheets/hour Printing units: 2 Machine size: Length: 1,270 mm, Width: 1,200 mm, Height: 1,550 mm Total weight: kg 900 / lbs 1,984 Equipment: - Wendung - konventionelles Feuchtwerk - Puderapparat Weko - Doppelbogenkontrolle
used
Reference Num.: 3662 Brand: Heidelberg Type: QM DI 46-4 Construction year: 1997 Impressions: 9 mio Size: 460 x 340 mm Available: directly Status: In production Location: Deutschland Sheet size: min 140 x 89 mm, max 460 x 340 mm Printing speed: max 10,000 sheets/hour Printing units: 4 Paper thickness: 17.72 mm Machine size: Length: 2,450 mm, Width: 2,550 mm, Height: 1,900 mm Total weight: kg 3,800 / lbs 8,378 Power: KW 11 / hp 11
used
Printing plate deal Grafoteam TAT 48; good condition; we overhaul before delivery; Max. Plate format 1630x1300mm, min.510x400mm; Interface connection possible. Turn around table Grafoteam TAT 48; good condition; will be rebuilt before shipping; max.plate size 1630x1300mm, min.510x400mm; possible to connect with other machine.