printing press used for sale

Used stainless steel rotary tablet press made by Horn. 23 stations. Unit has the following set of tools, 6 mm, 8 mm, 10 mm, and 12 mm. 6 ton clam. Unit has 2 feeding hopper 5 Liters each.

High-pressure cleaning device, high-pressure rinsing, high-pressure washer with suction device on hot-dip galvanized and painted high-quality steel frame with forklift tabs. The following models are available: Vortex Combi 800 Sewer B - 800 l sludge tank - 2750 l/min. suction capacity - Petrol engines: for sucking Honda GX390 8.8kW and for cleaning - Honda GX690 17.9kW Vortex Combi 1000 Sewer D - 1000 l sludge tank - 3600 l/min. suction capacity - Diesel engines: for sucking Yanmar L100 8.0kW and for cleaning Kohler KDW 1003 18.9kW HIGH PRESSURE PUMP 160 bar at 55 l/min. Manufacturer: COMET Model: TW Premium Cxr8gqdby HIGH-PRESSURE HOSE REELS: Type: manual hose reel Material: Stainless steel • Capacite: max. 50 m 1/2" high-pressure hose Hose: 50 m 1/2" high-pressure hose (included) LOW-PRESSURE WATER SUPPLY HOSE REEL: Type: manual hose reel Material: Stai ...

High-pressure cleaning device, high-pressure flusher, high-pressure built-in washer on hot-dip galvanized and painted high-quality steel frames with forklift flaps suitable for installation in company vehicles. PTC Moses 60/200, 75/150, 30/300, 75/210XL, 84/190XL, 102/150XL and 50/300XL similar but no evening & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Moses 60/200 | 60l/min. at 200bar | Engine: Yanmar 3TNV88C 27.5kW Stage V Moses 75/150 | 75l/min. at 150bar | Engine: Yanmar 3TNV88C 27.5kW Stage V Moses 30/300 | 30l/min. at 300bar | Engine: Yanmar 3TNV88C 27.5kW Stage V Moses XL 75/210 | 75l/min. at 210bar | Engine: Yanmar 4TNV88C 35.5kW Stage V Moses XL 84/190 | 84l/min. at 190bar | Engine: Yanmar 4TNV88C 35.5kW Stage V Moses XL 102/150 | 102l/min. at 150bar | Engine: Yanmar 4TNV88C 35.5kW Stage V Moses XL 50/300 | 50 ...

Used pressure leave filter, made by Padovan, type G10. -filtration surface 10 m2 -filter surface for waste liquid 0,46 m2 -24 filter plates with 745 mm diameter for liquid -6 filter plates with 330 mm diameter for cake -maximal cake thickness 22 mm, volume 216 dm3 -total chamber volume 655 L -working pressure 6 bar -nominal capacity 20.000 L/h -installed power 7,5 kW -dozing pump -rotary motor 4 kW -overall diamesions: lenght 2350 mm, width 1700mm, height 2100 mm

High pressure cleaner PTC CJ-1E similar but no Annovi Reverberi, Comet, Dibo, Ehrle, Frank, Kärcher, Kränzle, Nilfisk, Oertzen, Walter, Weidner ... - Operating pressure: 110 bar - Foerder quantity: 12 l/min. - Motor: Electric 4-pole 230V 2.2kW, 1400 1-min - Dimensions: 540 x 440 x 680 mm - Empty weight: approx. 40 kg - High pressure pump: Comet three-plunger pump with ceramic plungers - Stable plastic housing made of injection moulding - Practical holding device for gun with lance - Self-priming pumps with EASY-START equipment - Handle with brackets for the power cord and the high-pressure hose - Easy maintenance by simply removing the front panel - Large wheels (220 mm) for easy movement on steps and over uneven terrain - Manometer - Built-in professional relief valve - Delayed TotalStop - Pulsating system - Rotary switch - Thermal motor protection - Manual stainles ...

High pressure cleaner PTC CJ-2B similar but no Annovi Reverberi, Comet, Dibo, Ehrle, Frank, Kärcher, Kränzle, Nilfisk, Oertzen, Walter, Weidner ... - Operating pressure: 130 bar - Foerder quantity: 32 l/min. - Engine: Honda GX390 petrol 8.7kW - Dimensions: 1160 x 580 x 710 mm - Empty weight: approx. 80 kg - High pressure pump: Comet three-plunger pump with ceramic plungers - Robust steel frame - Practical holding device for gun with lance - Manometer - Built-in professional relief valve - Manual stainless steel hose reel with 30 m HD hose 3/8" + 10 m HD hose 3/16" - 2 pieces 3/8" and 1 piece 1/8" F pipe cleaning nozzles Oylbt - Pistol with washing lance and flat jet nozzle The CJ-2B is a professional mobile high-pressure cleaning device that is ideal for cleaning and removing pipe blockages for pipes 40 to 200 mm. Ideal for cleaning and removing pipe blockages of house ...

Used tablet press made by Metalchem Annopol, model TR 5 AM. 36 station (16 mm stamps). New 1998

High pressure cleaner PTC Easypower XL D similar but no Dynajet, Oertzen, Falch, Hammelmann, Woma, Uraca, Kamat, Denjet - Operating pressure: 400-1500 bar - Foerder quantity: 13-47 l/min. - Engine: Yanmar Stage V 4-cylinder 4TNV88 diesel 53hp/39.5kW, 2800 rpm - Dimensions: 1,600 x 1,320 x 1,200 - Kerb weight: approx. 740/760 kg - High pressure pump: HPP three-plunger pump with ceramic plungers - High-quality frame in lacquered steel with corrosion protection - Stainless steel covers - Holding device for pistol with lance - Available as skid with anti-vibration feet or as a trolly with industrial wheels - incl. 20 m high-pressure hose with stainless steel quick couplings, spray gun, lance and flat jet dues The following models are available: Easy Power XL D 47/400 | 47 l/min. 400 bar Easy Power XL D 38/500 | 38 l/min. 500 bar Easy Power XL D 30/600 | 30 l/min. 600 bar Ea ...

Used press for powder made by Vetraco, model CP 012. Capacity 200-800 pcs. / H depending on the size of the bowl and the formula powder. New 1996. Press 163x85x150 without housing Table 74x46x50 Net weight: 800 kg Engine: 5.5 kW Power supply: 380 V, 9 A, 50 Hz Compressed air a minimum of 5 bar Matrix Upper: 150x150x15 / 17.5 Matrix middle: 150x150x17 Matrix lower: 116x116x12,2 / 38.2

High pressure cleaner PTC Easypower XL E similar but no Dynajet, Oertzen, Falch, Hammelmann, Woma, Uraca, Kamat, Denjet - Operating pressure: 400-1500 bar - Foerder quantity: 13-38 l/min. - Motor: IE3 Electric 63A, 3Ph-400V-50Hz 50HP/37kW, 1450 w-min or IE3 Electric 63A, 3Ph-440V-60Hz 50HP/37kW, 1750 1-min - Dimensions: 1,450 x 900 x 1,050 mm - Empty weight: approx. 450 and 550 kg - High pressure pump: HPP three-plunger pump with ceramic plungers - High-quality frame in lacquered steel with corrosion protection - Stainless steel covers - Holding device for pistol with lance - Trolly with industrial wheels - Ergonomic handles for easier maneuverability - Industrial low-voltage supply (24V) and control unit with star-triangle starter and 10 m. power cable - Safety switch with thermomagnetic relay for motor protection - Main switch, start/stop buttons, emergency stop - Operat ...

High pressure cleaner PTC Easypower L B similar but no Dynajet, Oertzen, Falch, Woma, Kamat, Denjet - Operating pressure: 200-700 bar - Foerder quantity: 13-42 l/min. - Engine: Kohler Stage V Diesel 35hp/26kW, 3400 rpm - Dimensions: 1,370 x 850 x 1,020 mm - Empty weight: approx. 260 kg - High pressure pump: HPP three-plunger pump with ceramic plungers - High-quality frame in lacquered steel with corrosion protection - Stainless steel covers - Holding device for pistol with lance - Trolly with 4 pieces of industrial wheels 350mm - Electric starter - Operating hour counter - incl. 20 m high-pressure hose with stainless steel quick couplings, spray gun, lance and flat jet dues 15° The following models are available: Easy Power L D 16/500 | 16 l/min. 500 bar Easy Power L D 23/350 | 23 l/min. 350 bar Easy Power L D 20/400 | 20 l/min. 400 bar Easy Power L D 30/280 | 30 l/m ...

High pressure cleaner PTC Easypower L E similar but no Dynajet, Oertzen, Falch, Woma, Kamat, Denjet - Operating pressure: 400 or 500 bar - Foerder quantity: 38 or 30 l/min. - Motor: Electric 63A, 3Ph-400V-50Hz 40HP/30kW, 1450 rpm or electric 63A, 3Ph-440V-60Hz 40hp/30kW, 1750 rpm - Dimensions: 1,370 x 850 x 1,030 mm - Empty weight: approx. 280 kg - High pressure pump: HPP three-plunger pump with ceramic plungers - High-quality frame in lacquered steel with corrosion protection - Stainless steel covers - Holding device for pistol with lance - Trolly with industrial wheels - Ergonomic handles for easier maneuverability - Industrial low-voltage supply (24V) and control unit with star-triangle starter and 10 m. power cable - Safety switch with thermomagnetic relay for motor protection - 4 industrial wheels - Direct water suction by self-priming pump - Stainless steel relief v ...

High pressure cleaner PTC Easypower B similar but no Dynajet, Oertzen, Falch, Woma, Kamat, Denjet, Kärcher, Dibo, - Operating pressure: 500 or 700 bar - Foerder quantity: 21 or 15 l/min. - Engine: Vanguard 31 HP Stage V petrol 31hp/23kW, 3400 rpm - Dimensions: 1,000 x 820 x 850 mm - Empty weight: approx. 190 kg - High pressure pump: Comet TW 500 Premium three-plunger pump with ceramic plungers - Gearbox with 1560 1-min. pump - High-quality frame in lacquered steel with corrosion protection - Stainless steel covers - Holding device for pistol with lance - Trolly with 4 pieces of industrial wheels 350mm - Electric starter - Operating hour counter - Stepless pressure valve made of stainless steel with EASY-START - Large water filter with maintenance-friendly filter cartridge - incl. 20 m high-pressure hose with stainless steel quick couplings, spray gun, lance and flat jet  ...

ochdruckcleaner PTC Easypower E similar but no Dynajet, Oertzen, Falch, Woma, Kamat, Denjet , Kärcher, Dibo, ... - Operating pressure: 300-700 bar - Foerder quantity: 15-30 l/min. - Motor: Electric 32A/63A, 3Ph-400V-50Hz 20-30HP/15-22.5kW, 1450 rpm / 1750 rpm - Dimensions: 1,000 x 750 x 850 mm - Kerb weight: approx. 180/210 kg - High pressure pump: Comet three-plunger pump with ceramic plungers - High-quality frame in lacquered steel with corrosion protection - Stainless steel covers - Holding device for pistol with lance - Trolly with industrial wheels - Ergonomic handles for easier maneuverability - Industrial low-voltage power supply (24V) and control unit with star-triangle starter - Safety switch with thermomagnetic relay for motor protection - Operating hour counter - 4 industrial wheels 320 mm - Direct water suction by self-priming pump - Stainless steel relief v ...

Force of pressure: 100 to pass between stand: 915 mm piston stroke: 400 mm piston diameter of 90 mm maximum pressure: 215 bar table width: 590 mm maximum working height: 1300 mm forward speed: 10 mm / sec. Return speed: 14 mm / sec. Power of motor: 3.0 of kW width: 1450 mm depth: 850 mm height: 2400 mm weight approx.: 800 kg

Force of pressure: 30 to piston stroke: 150 mm table width: 185 mm passage (S): 530 mm bore (F): distance of 140 mm cylinders - table (F1): distance 150 mm cylinder - table (F2): 1030 mm cylinder movable (M): 200 mm width (A): (B depth of 800 mm): 700 mm height 1 (C): 1775 mm height 2 (D): 1805 mm weight: 162 kg

Force of pressure: 50T piston stroke: 200 mm table width: 260 mm passage (S): 730 mm bore (F): distance 205 mm cylinder - table (F1): distance 75 mm cylinder - table (F2): 1050 mm cylinder movable (M): 240 mm width (A): 1040 mm depth (B): 800 mm height 1 (C): 1835 mm height 2 (D): 1880 mm weight approx.: 287 kg

Stock# U2347-12 Used hydraulic press for removing paste/paint from mixing can. Press consist of carbon steel supporting column with height 399 cm mounted to base with dimensions 700 mm x 700 mm. Pressing head is mounted on cart which is rised and lowered by mechanical hoist which is driven by el. motor 0.37/1.5 kW, 380 V, 50 hz and is able to work up to weight range 2000 kg. Pressing head is designed for work on mixing cans with internal diamater 1100 mm. Top of pressing head is equipped with 6 clamps for mounting it on product container. Stroke of piston about 1150 mm. Piston is poweder from hydraulic device, driven by el motor 0.55 kW. Maximal working pressure up to 150 bar. Last time used in paint industry.

Horizontal baler Manufacturer: MEPAC Type: 30-18 Operating hours: approx. 10 Built: 2014 technical data: Pressure: 220 kN/22 to Filling opening: approx. 1,500 x 900 mm E-connector: 7.5kW 400V 50Hz, 3 Ph/N/PE Connection: CEKON plug 32A Bale dimensions: 970 x 770 x approx. 1,150 mm (W x H x L) Bale output height: 200 mm from the ground Bale weight: up to approx. 450 kg depending on material and length Machine dimensions: approx. 5900x1700x2000 mm (L x W x H) Machine weight: approx. 2000 kg Colour: light blue according to RAL 5012 Execution with: - hyrdaulian front door and - 2 pieces of hydraulic lids for closing the filling box - Binding by hand with polyester tape Description: Stable all-steel welded construction with edge profiles in a compact design. Robust electro-hydraulic, maintenance-free drive ensures easy and effo ...

New hydraulic press brake. Pressing force: 125Tn. Working lenght: 3200mm. Distance between housings: 2650mm. Stroke of the ram: 120mm. Distance between table and ram: 415mm. Depth of throat: 320mm. Motor power: 7,5kw. Weight: 7850Kgs. Dimensions: 3300x1800x2690mm. CE.

pressure:1000 t stroke:800 mm total power requirement:45 kW weight of the machine ca.:97 t dimensions of the machine ca.:4500 x 4400 x 5300 m Return Capacity:40 t Main Cylinder:(d=500mm) 2 Stück :(140 x 80mm) 2 Stück speed of forward flow:40 - 110 mm/sec Return Speed:150 mm/sec Press speed (infinitely variable via PLC):3 - 12 mm/s Table size:3000 x 2300 x 200 mm Ram plate:3000 x 2300 x 1000 mm demand for oil:ca. 1300 l :210 l/min :600 sec :1500 x 150 mm Hydraulic and mechanical protection of the plunger Two-piece auxiliary motors with 2.2 kw Two-piece auxiliary pumps with a power of 6 L/min. Concurrency monitoring (0.5 mm/m²) Fast forward speed adjustable via plc Maximum deflection of the table at 0, 07mm/m²

Used hydraulic press HK 7

Used hydraulic press PHW 12

pressure:500 t passage width:2100 x 1500 mm stroke:1000 mm total power requirement:62 kW weight of the machine ca.:39 t dimensions:5100 x 2800 x 4040 mm return capacity:40 t Main cylinder:2 Stück column diameter:Hauptzylinder 360 mm Table dimensions:2100 x 1500 with T-Nute mm Ram size:2100 x 1500 mm table height over floor:850 mm pre-running speed:300 mm/sec return speed:300 (bei 20T Stößelgewicht) mm/sec Pressure Speed:200T = 28 mm/sec Oil Tank Capacity:ca. 1000 l Auxiliary cylinder:2 Stück column diameter:Hilfszylinder 120 mm Total size Table Tops:ca. 2750 x 1600 mm Total size of plunger plates:ca. 2750 x 1600 mm Pressure Speed:300T = 20 mm/sec Pressure Speed:500T = 6 mm/sec Retract force of the plunger:40 t Tension of the control chain:24 V voltage:400 V Frequency:50 Hz Axial piston pump (REXROTH/Bosch A4VSO125):290 lt/min Daylight Opening:1500 mm Hydraulic block:REXROTH pressure  ...

High pressure - piston pump Flow water pump Manufacturer: UDOR Type: GAMMA 162 TS 1C. Detailed information on the manufacturers page, see pictures. Condition: Used, fully functional Scope of delivery: see the pictures.

Used pneumatic press for cheese made by Spomasz Rzeszow. New 2006. Available 2 pcs.

pressure:40 t table length:1000 mm table width:700 mm weight of the machine ca.:9 t dimensions of the machine ca.:4000 x 4400 x 1800 mm stroke length max.:1050 mm dayligth:1200 mm table rotating:um 180 Grad table load:5 t pre-running speed:100 mm/sec return speed:100 mm/sec work speed:von 0 bis 10 mm/sec. Main cylinder:1 Stück Table extendable by:for 1050 mm Table tilting:50 Grad Fold-down upper tool:180 Grad Speed of table:25 mm/sec Light sensors sick:1250 mm Description: Columns and cylinders are made of tool steel SAE 1045 (identical to German standard C 45) and external Induction hardened and chromium-plated. The linear measuring rod communicates the position of the plunger to the controller. The Traverse path, the upper breakpoint And the switch point at which the press should switch from empty journey to working speed, as well as the The end position to be used can be easily and q ...

pressure:63 t table length:700 mm table width:1000 mm weight of the machine ca.:ca. 9 t dimensions of the machine ca.:4500 x 4300 x 2700 m :1 Stück stroke length max.:1200 mm daylight dimension : table/slide up:1200 mm table height:700 mm :um 1200 mm :um 45 Grad :um 170 Grad :1250 x 1000 mm table load:5 t :25 mm/sec pre-running speed:95 mm/sec return speed:80 mm/sec work speed:von 0 bis 10 mm/sec.

pressure:200 t distance between columns:1200x1000 mm stroke:600 mm total power requirement:32,5 kW weight of the machine ca.:20,5 t dimensions of the machine ca.:4000x2600x5000 m draw back pressure:20 t Master cylinder:1 Stück voltage:400 V frequency:50 Hz :24 V :BOSCH/REXROTH dayligth:800 mm :1200x1000 mit T-Nuten nach Kundenwunsch DIN 650-22 mm work height max.:1100 mm pre-running speed:170 mm/sec return speed:150 mm/sec Speed printing phase:15 mm/sek. Hydraulic block:REXROTH demand for oil:500 l pressure control:über PLC (Mindestdruck 20t) Oil Cooling:elektrisch :220 (im Schaltschrank) V memory:200 Programme :über Monitor von 20-200 t Controll:Zweihandbedienung beweglich :2-10 mm/sec :0-10 sec

Filter cloth holder / Towel holder Material PP NEW available for all Kammerfitlerpressen / filter presses Other spare parts on request

Hydraulic cylinder filter press Chamber filter press New, used and refurbished Ask us.

pressure:20 t passage width:600 mm stroke:400 mm Weight of machine approx.:2,8 t dimensions:1960 x 900 x 2500 mm power capacity:5,5 kW table plate:600x600 mm pestle plate:500x500 mm daylight:400 mm table height over floor:850 mm :1000-20000 kg :400 mm Approach Speed:max. 100 mm/sec Pressure Speed:1-15 mm/sec :100 mm/sec :1-15 mm :S7 1200 Oil Tank Capacity:250 l

pressure:100 t stroke:1000 mm table surface area:1045 x 1045 mm table extendable:800 mm table speed:50 mm/sec dimensions:ca. 2550 x 2850 x 3620 mm height over floor:600 mm diameter of piston:76 mm ram diameter:110 mm ram hole:40 H7 Cylinder:300 mm total power requirement:5,5 kW pump capacity:24,9 Lt./min Pressure power:250 bar :200 l daylight opening:1600 mm daylight:1200 mm weight of the machine ca.:6,6 t hollow:180 mm hollow:400 mm :1000 kg :1 - 10 mm/sec work stroke:3 mm/sec :1 - 25 mm/sec :33 mm/sec

Plant: second-hand mobile Chamber filter press Type: Rittershaus & Baldwin AEHIS 1200 Year of construction: 1991 Filter plates sizes: 1200 x 1200 mm Number of plates: filter plates: PP Thickness: Expiration: closed Filter cloths: optionally available in voting on the medium Filter surface: approx. m ² Presses contents: approx. 3000 dm3 Filter pressure: 15 PSI Closing pressure: approx. 380-410 bar Plate transport: automatically Hydraulic power pack: Condition good Cylinder: no leaks, Rod blank-good condition Eccentric screw pump: as before priming pump Eccentric pump: EH2 type Bornemann 1900 Piston diaphragm pump: a pump Piston diaphragm pump: Type SP535N, Emmerich Wear parts: piston diaphragm pump replaced (proof of purchase. E installation: 2007 full service check (proof of purchase. Electrical connection: 125 amp input. Electrical connection: various outputs for external devices i ...

pressure:20 t distance between columns:200 mm stroke:200 mm weight of the machine ca.:1,5 t dimensions of the machine ca.:2000 x 1420 x 760 m heating plates :660 x 220 mm :200 mm :200 mm Oil Tank Capacity:70 l Table Height:1100 mm :125 mm Ram Height:250 mm

Pressure piece for Chamber filter press Passavant new! in the format 800 x 800, 1000 x 1000, 1200 x 1200, 1500 x 1500, 2000 x 2000 available ex stock. Special designs according to customer requirements Spare parts for filter presses / filter presses all manufacturers and models .

pressure:400 t passage width:600 mm stroke:400 mm Weight of machine approx.:14 t dimensions:2380 x 1680 x 3580 mm Engine Output:36 kW Max Working height:750 mm Approaching Speed max. :10 mm/sec Pressure Speed:10 mm/sec column diameter:230 mm Return Capacity:40 t speed rapid traverse:25 mm/sec Travel:500 mm Oil Tank Capacity:600 l Oil Cooling:1,5 kW :6 m Monitor:WEG 12 Zoll :6800 ? :4200 ? Speed increase to 80 mm/sec.:19000 ? every additional meter conveyor belt:850 ? Faster Version with approach and working speed at 60mm/sec ist available on request. Price (excl. options): 117.500,--

pressure:56 t table length:1000 mm table width:700 mm daylight opening:1200 mm No. of Cylinders:1 St. stroke length max.:1200 mm table height over floor:700 mm table extendable:1200 mm Speed of table:25 mm/sec Table tilting:45 Grad table load:5 t Fold-down upper tool:170 Grad :1250 x 1000 mm :95 mm/sec speed of return flow:80 mm/sec working feed:0 - 10 mm/sec dimensions:4300 x 2700 x 4500 mm total weight:8,5 t Monitor Siemens:9 Zoll :1200 mm

pressure:40 t stroke:250 mm return capacity:6,3 t motor:5,5 kw Max Working height:450 mm :90 mm/sec. :10 mm/sec. spindle stroke:250 mm pestle plate:500 x 200 mm table plate:600 x 650 mit T-Nuten mm Table cut-out:200 x 170 mm table height:850 mm :200 l

Cat.-No. 15 00059 new Measurements and Weight: Length: 1730 mm Width: 570 mm Height: 1340mm Weight: 300 kg Characteristics of the drive: Spur gear transmission: - Transmission 38 /min Screw rotational speed (output speed) 12-50 /min Electrical Data: - Power 5,5 kW - Rotational speed 1450 /min - Current consumption ~ 11A - Voltage 3/PE/400 V - Frequency 50 Hz Machine power: max. 80 kg/h of purifies rape seed Operating Instructions available All prices are valid Ex-Works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from D-97753 Karlstadt-Karlburg Subject to prior sale Visit our Web-Site: www.eurolux-ag.com

Used press for powder made by Vetraco, model CP 024 S. Performance 300-2000 pcs/h depending on the size of the bowl and the formula powder. New 2007. Power supply: 400 V, 25 A, 50 Hz Matrix Upper: 260x173x15,1 / 17.35 Matrix middle: 160x173x17 Matrix lower: 222,8x138,8x12,1 / 37.75

pressure:40 t stroke:250 mm return capacity:6,3 t motor:5,5 kw Max Working height:450 mm :90 mm/sec. :10 mm/sec. spindle stroke:250 mm pestle plate:500 x 200 mm table plate:600 x 650 mit T-Nuten mm Table cut-out:200 x 170 mm table height:850 mm :200 l

pressure:200 t stroke:800 mm total power requirement:25 kW draw back pressure:16 t :1 Stück Column-Diameter:150 mm dayligth:1200 mm Ram Height:1000 mm Ram size:1300 x 2220 mm table surface area:1500 x 1300 mm :1300 x 2220 mm :820 mm table surface area:1500 x 1300 mm table height:800 mm table load:8 t pre-running speed:1 - 9,8 mm/sec return speed:2,5 - 25 mm mm/sec quantity of oil:300 l weight of the machine ca.:17 t Dimensions (L/W/H):2420 x 1300 x 4782 mm :0 - 200 T :1 - 10 mm :elektrisch

pressure:40 t table length:1000 mm table width:700 mm weight of the machine ca.:9 t dimensions of the machine ca.:4000 x 4400 x 1800 mm stroke length max.:1050 mm dayligth:1200 mm table rotating:um 180 Grad table load:5 t pre-running speed:100 mm/sec return speed:100 mm/sec work speed:von 0 bis 10 mm/sec. Main cylinder:1 Stück Table extendable by:um 1050 mm Table tilting:50 Grad Fold-down upper tool:180 Grad Speed of table:25 mm/sec Light sensors sick:1250 mm Columns and cylinders are made of tool steel SAE 1045 (identical to German standard C 45) and externally induction hardened and chrome-plated. The linear measuring rod informs the controller of the position of the pestle. The travel path, the upper stop and the switching point at which the press is to switch from empty travel to working speed, as well as the end position to be approached can be entered easily and quickly via the mo ...

pressure:500 t passage width:1300x800 mm stroke:600 mm weight of the machine ca.:18 t dimensions of the machine ca.:2400 x 2400 x 5500 m draw back pressure:50 t Controll:Zweihandbedienung cylinder:1 Stück motor:50 kw Oil Cooling:elektrisch column diameter:200 mm work height max.:700 mm Table dimensions:1900 x 800 mm table height over floor:1000 mm pestle plate:1300 x 800 mm pre-running speed:150 mm/sec work speed:5-10 mm/sec. return speed:150 mm/sec :1500 l quantity of oil:1400 l

pressure:2x 75 / 150 t passage width:2050 x 965 mm stroke:800 mm total power requirement:Hauptmotor 22 kW weight of the machine ca.:6,5 t dimensions of the machine ca.:1500 x 1025 m :150 mm :150 mm :72 mm :2 kW :870 x 350 x 150 mm :1500 x 600 x 150 mm :1500 x 1025 x 75 mm :1500 x 1025 x 150 mm :120 mm :80 mm :350 l demand for oil:320 l :350 mm max. open height:1600 mm :15-0 mm/sec :100 mm/sec :2050 x 965 mm :6 mm :0,5 mm

pressure:150 t total power requirement:20 kW weight of the machine ca.:11,5 t dimensions of the machine ca.:8800 x 1800 x 2200 mm Pressure adjustment via rotary control infinitely adjustable:15-150 t Cylinder diameter:100 mm Press speed (infinitely variable via joystick):0-9,9 mm/s servo motor:2 kW Cooling unit:1 kW Oil tank (under table):350 l Oil cooling (electric):1 kW (max)

pressure:80 t stroke:500 mm total power requirement:12 kW weight of the machine ca.:5,1 t Controll:Zweihandbedienung cylinder:1 work height max.:800 mm working area:800 x 800 mm Table dimensions:800 x 800 mm pestle plate:2800 x 1300 mm table height:800 mm pre-running speed:9,8 mm/sec work speed:9,8 mm/min return speed:18 mm/sec :700 mm Column-Diameter:75 mm :10 kW main drive:WEG 15 kW pump:REXROTH, Parker elektronische Axialkolbenpumpe kW :25 (bei280bar) t :200 mm :30 mm :80 mm/sek. :REXROTH/Parker :REXROTH/Parker :300 L :ca. 250 L :über PLC (Mindestdruck 10 to :zur Ölabkühlung ? mit Elektroventilator :manuell, über Schmiernippel oder Kartuschen :SIEMENS / MOELLER :auf Schwenkarm :automatisch über 2 Handbetrieb mit Schlüsselschalter, manuell über Bedienpult im Einrichtbetrieb :Zweihandbedienung beweglich, :zur Datenübertragung :Siemens für Fernwartung :zur Hublängeneinstellung ...

pressure:150 t passage width:1200 mm stroke:700 mm total power requirement:35 kW weight of the machine ca.:13,5 t dimensions:ca. 3600 x 1900 x 5200 mm return capacity:15 t column diameter:160 mm table height over floor:1000 mm ejector stroke:250 mm pressure of ejector:50 t ejector speed:150 mm/sec dayligth:ca. 1000 mm table clamping surface LxW:ca. 1200 x 800 mm clamping area of ram:ca. 1200 x 800 mm :inkl. Ram Height:800 mm :min. 350 mm/sec feed under pressure:min. 60 mm/sec feed under pressure:min. 20 mm/sec return speed:min. 300 mm/sec weight of upper tool min.:1000 kg weight of bottom tool min.:1000 kg weight of tools min.:2000 kg material thickness:0,1 - 0,5 (1.4301 / 1.4828) mm :0,2 mm pro m :10 - 100 % :inkl. Oil cooling (electric):inkl. SIEMENS Controller S7 1200:inkl. :inkl. :inkl. USB interface for data transfer:inkl. Monitor SIEMENS:12 Zoll :inkl. :inkl. tool clamping:24.000,- ...

1 x Wickert 500ton upstroke vacuum press, Type: WKP5000/5/3, Year of manufacture: 1997, Machine Number: 2885 with 500mm x 500mm electrically heated platens, sliding bottom platen with ejector table, Daylight: 340mm 400/690V, 50Hz, 22kW. Heaters 12.5kW, Pressure 300 Bar Fixed guarding to rear, SICK light curtain guards to the front. With Siemens S5 PLC controls. In very good condition.