printing maschine used for sale

Ablader - Unloader - Sheet Pile Stacker Schneider Maschinenbau AG 1058 Year 1990 - Serial-No. 633-1217 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Compressed air tank up to 11 bar, volume 500L

Double Shield Tunnel Boring Machine for hard rock Typ of TBM Hardrock Double Shield TBM Manufacturer Robbins / Herrenknecht Year of manufacture 2015, 2020 Boring diameter DME = 7.100 m Length 14 m Main drive power 7 x 330 kW = 2.310 kW Main trust force 33.780 kN @ 350 bar Stroke length 1.760 mm Installed power 4.800 kVA Weight ca. 770 t Find more here - /

Sell 9 used machine feet with rubber foot Thread M20 Diameter 200mm Good condition Shipping on request All prices are subject to 19% VAT

Manufacturer: Bell Maschinenfabrik Year of Manufacture: 1988/1989 Design: Horizontal Nozzles: 2 Flow Rate (Q): 2.1 m³/s Net Head (H Net): 209.5 m Power Output (P): 3750 kW Speed: 429 min⁻¹ Operating Hours: 285,000 by end of November 2024 Pelton Wheel: PN25 DN 700 The turbine is sold completely with bearing and control hydraulics, as well as turbine governor, controller, Pelton wheel, and housings, along with supply pipes. Spare runner (11,000 operating hours) is available. Optionally, the generator, including the turbine bearings from AvK, can also be taken over: 10.2 kV, air-cooled. Find more here - / Contact us at -

Malt Mill Sommer Hafer-Boy Piccolo 150 kg/h This grain crusher can crush various grains, such as oats, barley, wheat, corn, spelled etc. It has two rolls which one is driven by an electric motor with belt drive. Mill was manufactured in year 2106 by German Egon Sommer and it is in good operational condition. Technical Characteristics Manufacturer: Egon Sommer Maschinenbau GmbH Manufacturer’s model: Hafer-Boy Piccolo 11SB Manufacturing year: 2016 Capacity: 100-150 kg/h Number of rolls: 2 Electric motor: 1.1 kW / 400V / 50Hz Main dimensions: 58x40x33 cm (LxHxW) Weight: 64 kg

Manufacturer: Homag Druckrollen, Type: Teile von KF Maschine, Year: 1996, FREITEXT1: EINZUGSVORRICHTUNG 10 ROLLEN HOCHKLAPPBAR<CRLF>mit schräggestellten angetriebenen Rollen<CRLF>versetzt. Min. Werkstücklänge 250 mm, Year :1996

Manufacturer: Siemens Achsmotor für Ima Maschine, Type: 1FK6063-6AF71-1AG0, Motor with gear: yes, Maschinennummer: YF M110 5834 02 003, From machine: IMA BIMA, Motor with gear: yes,

Manufacturer: Gruse Maschinenbau, Type: ELS 1-10-6-G-SO, Year: 2013, Lifting power kg: 1000, Length mm: 1500, Width mm: 1000, Lifting hight approx. mm: ca.1000, Total hight mm: 230, Safety strip: yes, Carriage: no, Total power kW: 2,3, Wight approx. kg: 870, CE-Sign: yes, FREE TEXT: Gabelstapler ausparung/Handbedienpaneel, Year :2013

Manufacturer: MB Maschinenbau, Type: ROBA-Simplex, Year: 2010, Control: yes, Monting of the machine: Schleiflamelle, Control: yes, Sanding belt hight: 100 mm, Table length: 1800 mm, Slewable sanding head: no, Sanding belt width max mm: 100, Work piece hight min-max mm: 80, Schleifbandgeschwindigkeit min-max m/sec: Frequenz, Bandantriebsmotor kW: ca.4, Oszillation mm: yes, Hight adjustment by hand wheel: yes, FREE TEXT: Luftpolsterkissentisch, Year :2010

Manufacturer: Giradina Lackwalze, Type: gelaufen in Maschine BMG/95/07, Year: 1998, Year :1998

ID3532 FC Maschinenbau-Schlüsselbauer-Schindler year/Baujahr 1995/2010 Fully automatic stone finishing system (edge aging, bush hammering, impregnation) Fully automatic stone finishing system for the artificial processing of concrete block surfaces and edges, as well as for impregnation. The special feature of this system is that, unlike conventional processes, only the edges can be aged. Furthermore, the system also allows bush hammering of the stone surface. Fully automatic brick finishing system (stone edge aging, stick planting, impregnation) Fully automatic stone cutting system for the artificial processing of concrete block surfaces and edges as well as impregnation. The special feature of the system is that, in contrast to conventional processes, only the edges can be aged.  In addition, the system also allows the stone surface to be hammered. More details and price ...

Inv. Num. : 3483 Type: HELICHECK Producer: WALTER MASCHINENBAU Created: 2004 Parameters: The machine is in good technical condition and energized Accessories: Hydraulic clamps SK50

tank: 1.300 l Pressure of pump: 8 / 20 / 80 bar total power requirement: 18,4 kVA weight of the machine ca.: ca. 0,7 t dimensions of the machine ca.: 2,40 x 2,00 x 1,96 m Documents: Coolant System BÜRENER MASCHINENFABRIK - BFU 1300 S/80/20/8+ Z/K - NEW, unused - universally applicable - can be controlled via contactors - incl. paper belt filter Technical Data (Motor): - 1,350 rpm - 0.12 kW - incl. centrifuge (Ruma MZ 35) Technical Data: - Rotor speed: 4,615 rpm - Rotor diameter: 230 mm - Temperature (min/max): 10 - 50 °C - Flow rate (min/max): 10 - 35 l/min - Max. solids quantity: 6 kg - Rated power: 2 kW - incl. cooling unit (Deltatherm E4) Technical Data: - Power: 4 kW - Max. ambient temperature: 40 °C - Max. operating pressure: 28 bar - Refrigerant: R407C - Refrigerant quantity: 2.4 kg - Connected power: 2.5 kW - Pump power: 5.5 kW, 2,950 rpm Th ...

Horizontal cartoner 60-ECO – compact, powerful and flexible Lack of space is a common issue in the food industry – with the 60-ECO horizontal cartoner, we offer a compact and powerful solution! The machine has been specially developed to efficiently process a wide variety of folding carton sizes in a minimum of space. With a basic length of only 2,284 mm (expandable depending on the desired conveyor belt length), it achieves an output of up to 60 folding cartons per minute. Technical highlights: Product feed adaptable: The feed belt can be individually adapted if desired. Automatic product clocking: We can design and fully integrate automatic metering of the products. Packaging area: Processing of folding cartons up to 220 mm long (A), 120 mm wide (W) and 400 mm high (H). Proven technology for maximum reliability: Lasbmmxgqsmftm Nonsb Control: Siemens PLC syste ...

2 lactose decanter systems, One is from Sharpes, Alfa Laval Group, Machine built in 1990, overhauled Order No. ZM 6063/90, Masch, No. 2312 Speed max. 3250 rpm, drum diam. 355.6 mm The 2nd machine is from Geißel Maschinenbau GmbH 97246 Eibelstadt Masch. No. 2367 from 1992 Drum diameter 355 mm, speed max. 3,150 per min.

Our new Model 90-HCI cartoning machine – powerful, flexible and efficient The new 90-HCI cartoning machine impresses with its high performance, precise product guidance and maximum efficiency – even for complex packaging tasks. It has been specially developed for applications in which several products or bags are grouped together and then automatically inserted into a folding box. This makes the 90-HCI particularly suitable for packaging lines with high throughput and variable product diversity. The machine achieves a maximum output of up to 90 cycles per minute. The carton sizes that can be processed vary depending on the grouping and arrangement of the products on the feed belt: Box width (A): 40–310 mm Box height (W): 15–100 mm Box depth (H): 80–350 mm The 90-HCI is the ideal solution for demanding packaging processes where efficiency, flexibility and ...

Vertical continuous cartoning machine – fast, efficient and precise Our vertical cartoning machine is specially designed for continuous high-speed applications. It is ideal for the automatic packaging of bulk materials, especially in combination with a multihead weigher system. Thanks to its continuous operation, the machine achieves a maximum output of up to 100 packs per minute – reliable, gentle on the product and efficient. Specifications: Capacity: up to 100 packs/minute Carton size range: Width: 60–180 mm Height: 30–85 mm Depth: 130–260 mm Dosing system: Multihead-Weigher (multihead weigher) The vertical design enables particularly space-saving integration into existing lines, while the continuous carton handling ensures uniform product feeding and very smooth running. This machine is the perfect solution for companies that demand high pac ...

Flow-wrapping machine KLAT 14-IF – gentle packaging for sensitive products The KLAT 14-IF has been specially developed for packaging products that are sensitive to breakage. The adjustable inclination of the machine body of up to 45° ensures that the product falls into the bags particularly gently – ideal for sensitive goods such as biscuits, waffles or snacks. The machine is versatile and suitable for the production of: Stabilo bags Pillow Bags Stand-up bags Specifications: Maximum film width: 600 mm Maximum bag length: 310 mm The KLAT 14-IF combines high flexibility, product-friendly processing and precise sealing technology – an ideal solution for producers who rely on both product protection and attractive packaging formats. We will be happy to advise you on whether the machine is suitable for your products and offer you a tailor-made solution.

An ultrasonic welding system with two Telsonic TSP-3000-1P, cabin, generators and documentation is available. Welding force: 2500N, table dimensions: 420x415mm, height adjustment: 250mm, stroke: 100mm, control: Siemens SIMATIC PANEL, length: 762mm, width: 854mm, height: 1316mm, weight: 130kg. On-site inspection is possible.

: 40 1008 rated current: 20 A voltage: 24 V weight of the machine ca.: 3,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 20000 kg height of stroke: 130 mm Total height: 327 mm weight: 33 kg dimensions: 250 x 280 x 330 mm Hydraulic machine jack Foot height 26mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Shipping weight: ? kg Packing: 1200 x 800 x 1500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

59 Pcs. Machine Feet / 7 Models - for leveling machines of all kinds - 23x 250/150/90 mm - 18x 200/120/100 mm - 6x 250/150/100 mm - 3x 240/100/80 mm - 4x 150/150/50 mm - 2x 250/115/70 mm - 3x 200/200/60 mm

Dispersing system Manufacturer : IKA Maschinenbau Type: DISPAX-REACTOR DR 3-13/4 Capacity: max. 20,000 litres/hour Technical specifications : Disperser for continuous operation. The maximum delivery pressure is 2.5 bar. Motor 18.5 kW, 3,000 rpm Mechanical seal is connected to the water. In the dispersion chamber there are three stators and rotors in the coarse-medium-fine gradation as standard. This combination can be varied as desired, both in order and in the degree of fineness. Documents: available

Planer and moulder with grinding unit Position 1. Abricht Spindel Position 2. Right Vertical Spindle Spindle Position 3. Left Vertical Spindle Position 4. 2. Right Vertical Spindle Position 5. 2. Left vertical spindle Position 6. Upper Horizontal Spindle Position 7. Bottom Horizontal Spindle Position 8. Grinding unit at the top Position 9 Grinding Unit Bottom Position 10 Universal Spindle

STEIN Maschinenbau Profile Guillotine PT1-200 For glazing beads, small profiles, main profiles and technical profiles Max. cutting width: 190 mm, max. cutting height: 120 mm Extrusion speed: up to max. 10 m/min Blade length: 600 mm Length accuracy: +/- 2 mm Knife stroke: 180 mm Cutting speed infinitely variable Pneumatic quick-change device for knives Hold-down device pneumatic Knives are preheated: 80ºC - 160ºC Cycle time: 1.5 to 4 sec. adjustable on the display Infeed side: unit for applying a protective film to the profile Control: Compact PLC Siemens S7-613C Dimensions: Height: approx. 1,900 mm, extrusion height: 1,100 mm (+/- 50 mm height adjustment) Footprint: approx. 1,450 x 800 mm (without inlet and outlet tunnel) Condition: very good, ready for use

A vertical glass storage cabinet TMB with integrated lighting for inspecting glass sheets is available. Load capacity: 2000kg, machine dimensions X/Y/Z: approx. 6550mm/1250mm/3600mm, weight: approx. 1750kg. The lighting may need to be checked and possibly replaced. An on-site inspection is possible.

Ref. 509 Proof press KORREX Hannover Max Simmel, Maschinenfabrik Ma.: No. 421352 / Year of construction: 1960 Table size: 50 x 70 cm With inking unit: 3 ink application rollers Front marks and side marks Weight: 530 KG Tested and printed Ref. 509 Proof press KORREX Hannover Max Simmel, Maschinenfabrik Ma.: No. 421352 / Year of manufacture: 1960 Table size: 50 x 70 cm With inking unit: 3 ink ink rollers Front lay marks and side lay mark Weight: 530 KG Checked and test printed

Recycling plant/recycling plant General information • Plant type: PET sorting and washing system for the production of PET flakes • Manufacturer: STF-Maschinen & Anlagenbau GmbH • Year of construction: 2023 • New value EUR 4,970,000.00 • Market value (at location): EUR 3,052,000.00 • Installed in two connected halls incl. foundations • Plant currently not in operation (standstill since 11/2024) Technical key data • Max. configuration: 2,000 kg/h • Max. achievable output in continuous operation: 600 kg/h • Output in test run with good material: >1,500 kg/h • Energy requirement: 650-680 kWh (without hot washing system) Stages of the procedure 1. Feeding of PET material (pressed bales) 2. Coarse sorting via sieve drum 3. Magnetic separation of metallic impurities 4. 2-stage sensor sorting (materials) 5. Manual sorting via sorting belt 6. Mill and  ...

Two DM-323 electrical discharge machines are available. Operating hours machine 1/2: 12,134.51 / 32,704.5 h. Operating manuals and circuit diagrams available. An on-site inspection is possible.

X-axis: 3050mm, Y-axis: 2050mm, Z-axis: 120mm, wavelength: 9.3-11.5µm, laser power: 300W, laser class: 1, operating pressure: 2bar, control: Beckhoff TwinCAT, length: 5050mm, width: 2950mm, weight: 3.8t, with CO2 laser Rofin Sinar SCX 30 HP 16.6, year of manufacture: 2022. An on-site inspection is possible.

Cliché montage device Age 2015 Cliché mounting device

Manufacturer: König Maschinen Gessellschaft m.b.h. Austria Type: KGV Combi 2000 / 40, ( DD ) – RR 800- K5-SA5- SP5-FS-VO-MO (WB) 800-ABI 800 Year of manufacture: 2001 Control panel: Siemens Simatic The plant is controlled by a control panel with visual display Electricity: 3 x 400 V, 50 Hz, 13.5 kW Dimensions: Total length 11 meters The line is intended for the continuous production of weighed dough pieces which are automatically transferred from the main machine. ( Rex Automat ) The machine offers the following functions: - Rex automatic weighing and reception of the kneaded dough pieces. - Proofing in controlled air conditioning - Shaping of dough pieces, e.g. long rolling - Cutting of dough pieces - Flouring of dough pieces - Patterning of dough pieces - Seeding of dough pieces, e.g. sesame seeds, poppy seeds, sunflower seeds, etc. - Transfer of dough pieces to  ...

Mandrel tube bending machine Fabr. LONG Type EL 45 Specifications: for pipe diameters 45 x 2 mm Mandrel holder length 2,000 mm Bending speed for 90° approx. 3 s electr. Connection 380 V, 2.2 kW Weight approx. 1000 kg with tools: 16 x R 76 22 x R 76 28 x R 75 35 x R 105

General SKU341U845 LocationBarneveld MakeWagner Maschinen GmbH TypeSE-MAN/SLSV No.SE-2012 Main Features MaterialStainless steel Motor3 KW Inlet diameter780 mm Specified Features - Bag dump station MaterialPTFE (Teflon), Stainless steel 1.4301 (304) Bag dump stations With hoppercheck PTFE coated Hopper sizesDia:780x550mm Inlet690x940mm OutletDia: 200mm With motor3kW, 230/400Volt, 1430rpm With vibro motor0,18 kW Hopper with flexible wallcheck Information Year of construction2007 Mounted on framecheck With switchgearcheck Floorspace3 x 1,95 m CEcheck Total height2,4 m Weight1200 kg Extra SpecificationsIn this dump cabinet, bags can be emptied, and then the empty bags can be thrown to the back of the cabinet, where they are removed by a screw.Endless disposable bag system The cone under the dump cabinet is flexible. There is an air cylinder mounted here to knock  ...

Roll Width: 1.000 mm - Roll Dia. 630 / 800 / 630 mm - With electrical motors

: workpiece length - max.: mm max. module: 0 total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8894 Type: B24-TH300 DX/DW PU Producer: H&H Maschinenbau Created: 2020 Parameters: Weight: 498 kg Equipment: PUVS 280 P melting machine for 20 kg drums of PUR adhesive

As good as new chip conveyor from Bürener Suitable for Emco HT 45 lathe

Key data: 1350 mm, 3 , 120 mm

Weber LCE 2000 wide belt sanding machine with lift table loading ex site for sale.

Condition: tested, fully functional Availability: immediately Width approx.: 350 mm Length approx.: 1570 mm

We sell a high performance doming machine Machine for the production of LED and electronic encapsulation, 3D stickers and much more. The doming machine is designed for production with 2K polyurethane or UV doming resin and offers flexible applications, e.g. for the casting of LED light strips, for electronics sealing or doming stickers Condition: very good Our doming system is designed for industrial continuous load: precise axes, volumetric gear metering, and user-friendly software. Whether it's LED potting, electronic coating or 3D stickers, you get a machine that reduces your unit costs while keeping quality consistent. An all-rounder for series production for maximum cycle time and large components. With a height-adjustable, mobile work table, for a flying change in continuous operation without downtime, ideal for wide range of applications. IN A NUTSHELL • Hig ...

Equipment: Insulation, agitator,Manufacturer: Thrun Maschinen- und Behälterbau,Condition: used,Volume: 113,000,Design: upright,Stand form: Stand frame,Insulation: available,Insulating jacket: hermetically welded,Insulation material: PU foam,Material insulation jacket: stainless steel,Diameter inside: 3,750,Cylindrical height: 11,700,Total height: 13,000,Technical documents: Drawing,Manhole / dome: in the cylinder,Type plate: No,Equipment: Ventilation/ventilation, spray head, crane eyelets, Outlet: available,outlet : 80,last use: foodstuffs,agitator: propeller,bottom bearing:

Condition: in working order Availability: immediately Location: Thuringia / Arnstadt approx. table 600 x 400 mm approx. travel distances X / Y / Z: approx. 400 / 320 / 410 mm approx. spindle holder SK 40 Approx. spindle speeds 45 - 2240 rpm approx. drive power 4.9,kw approx. weight 2000 kg

Various conveyor belts, different lengths and widths, conveying screws, vibration troughs, washing systems,, NIKO trough for flushing, ABL washing system with conveyer belt,, PEACE submachine for apples,, SOLIA G450 large kitchen slicer,, SOEHNLE belt conveyer scale., Destacking for GN shells,, GMS ILPRA - sieve seal for gastro basins,, GÜNTHER Tauchbad,, BAKON glaze application,, Special filling - system for mushrooms,, LOMA metal detector,, NILFISK High-pressure station,, Rotary drum screen for wastewater treatment, WINKLER CORSAR drum dryer,, MAJA ice cream machine,, DIERKS spiral nut, DIOSNA planetary mixer,, NWU Water Cooler,, KAESER compressor,

width: 3.000 mm height: 1.900 mm length: 800 mm Pneumatic gluing press FEDERHENN MASCHINEN type 99.98 with equipment for the final assembly of grave crosses. The press is modular and mobile and can be converted for different pressing tasks. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Press cooling star discharge for material handling of pressed door elements