135,411 used machines on RESALE, but how to find them? Machine Search
Specifications Manufacturer Benhil Model 8312 Junior Year 1977 Condition Used Serial Number 312/57 Type of Machine Butter Packaging Machine Capacity ± 750 Kg/h Capacity (Units) up to 50 packages per minute Packaging Weight 250 gram Packaging Size 100 x 75 x 35 mm (German standard) Packaging type Bottom folding Motor power 2,2 kW Dimensions 300 x 170 x 200 cm Weight ± 1.275 kg Description Foil wrapping machine which can be used for packing products butter, lard, margarine, tvorog or cottage cheese into aluminium foil or parchment paper. This machine is in a reasonable mechanical and electrical condition (renewed by Schuy, auftr. nr: 13632-01). The format on the machine is Standard size: 250 gram, 100 x 75 x 35 mm, bottom folding. Capacity: up to 50 portions per minute. The butter is feed with an aluminium through with aluminium augers. Aluminium dosing station. T ...
3M-Matic 800a-E Type 29600 (5799) Carton sealing machine for lid and bottom closure with adhesive tape, side belt belt drive system, carton format range in mm length 150 - ~, width 115 – 550, height 120 – 625, manual carton size adjustment, maximum carton weight approx. 38 kg, roll discharge with a length of approx. 1200 mm, drive laterally, electrical connection 380V/50Hz/3PH/1.4A, 260W, machine in mobile version on rollers, output up to 40 cartons per minute
Key data: 3200 kN, 359 g/PS, 50 mm
1.0 St. gebr. Two-component injection molding machine Manufacturer: ARBURG Type: 720A3200-800/70 Year of Make: 2017 Clamping force: 320 tons Spar spacing 720 x 720 mm Installation height min./max.: 300 - 800 mm Opening travel: 600 mm Screws DN 1: 50 mm Max. displacement: 392 cm³ Moulded part weight in hp: 359 g Screw DN 2: 22 mm Max. displacement: 34 cm³ Moulded part weight in hp: 31 g Control: Selogica Request technical equipment.
Transnorm belt curve conveyor right 90°-885-700-IR400 RA1830 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Technical data: Conveying length middle radius (NL): 1178 mm Frame width (NB): 885 mm belt width (GuB): 700 mm height (BH): 170 mm height including motor (MH): 370 mm Inner radius (IR): 400 mm Conveying angle: 90° degree ...
Cast iron clamping cube 2 faces Length: 1000 mm Height: 600 mm Depth: 800 mm T-slots dimensions: 38 x 22 mm Weightapprox: 600 kg
Metrohm Dosino 800 with dosing drive and burette unit in 5 ml, 10 ml, 20 ml and 50 ml
Vertical injection moulding machine Arburg 900 T 800/150 BJ 2001
Permanent Magnet Brushless Servo Motor SIEMENS with ALPHA Spur GearServo Drive, Gear Motor, Servo GearType:1FT6105-8SF71-3EG1Series No. YF P921 8717 03 001Year of Manufacture: 2002Nominal Torque = MO: 54/65 NmNominal Current = Io: 36/45 ADreh Number = n. max.: 4500 rpmSpur Gear ALPHATyp: SP 210-MF2-20 -021-000Shaft Diameter 75 mmStump Shaft Length 105 mmCentering Diameter 180 mmCentering Diameter 35 mmBolt Circle Diameter 250 mm / 4 x 17 mm BoresHousing Dimension L/W/H 725 x 225 x
Hydraulic copying device SAUTER type KMC 8001Copier turning device, copying turning device for lathesThe copying device comes from a lathe.Connections for oil supply and oil returnCopying stroke: approx. 140 mmRadial travel at 60 Construction: 120 mmRequired operating pressure: approx. 25 barOil volume flow: max. 7 litres/min. Drive power of the lathe: max. approx. 15 kWSpan cross-section: max. 3.5 mm²Copy carriage stroke: approx. 125 mmDistance of lathe chisel to the stylus: 800 mmDead weight Copier: approx. 100 kggoods
Quick-opening milling spindle HENNINGER type 814 / 5131 / 1:5 / 15000speed max. 15000 rpm at 70% EDratio ratio 1:5Power transmission up to approx. 2.5 kWProduct dimension 110 mm (machine spindle to clamping nutTool holder MK4 with tightening thread M16Collets type OZ16 6 / 8 / 9 / 10 / 11 / 12 / 12.5 / 13 / 14 mmWeight 6.5 kgGood condition; used
Stretch blow moulding machine from EtekISBM Line = Injection stretch blow moulding Stretch blow moulding machine for disposable PET bottles made from PET preform blanksStretch blow moulding machine for production in rotary transfer processManufacturer: ETEK / GF-Industries Type Supra 800 sv 1Serial number: 22000225Year of construction: 2012Power: 90 kWNet connection: 400 volts, 50 HzNet weight approx. 6000 kgas good as new; used
Screen PTR 8600 E Built: 2010 Included one XMF for TIFF with PC. Developer G&J 125 – ZAC Available immediately.
Clamping table with T-slotsClamping plate, clamping block, groove tableClamping cube for radial drilling machineClamping surface top: L x W = 1200 x 800 mmClamping surface side: L x H = 1200 x 200 mmOverall height: 400 mmD- Grooves: 20 mmD- Groove spacing: 200 / 60 mmOverall dimensions L x W x H: 1200 x 800 x 400 mmWeight: 680 kg; used
Key data: 8000 mm, 1300 mm, 2200 mm
1 new CNC travelling column milling machine Make: Soraluce Model: FL 8000 Year of manufacture: 2014/15 Spindle hours: 3242 Hours: 4261 Control: Siemens 840 D Solution Line Technical data: Travel distances X-Y-Z: 8000 x 1300 x 1800 mm Travel C-axis: 360 degrees Plate clamping area: 6000 x 2000 mm Tool holder: SK 50 Capto C8 Speed range up to: 4000 rpm. Main drive: 43 kw. Rapid traverse: 35 m/min. CNC rotary table: 1600 mm 250 rpm Weight approx.; 40 to. Equipment / Accessories: Tool magazine: Controlled universal milling head Conveyor Full enclosure Complete cooling water system electronic handwheel IKZ. Fibro Reversible Clamp Fibr ...
Decoiler, Reversible Decoiler GSW SCHWABE Type LHD 50/800 SondDouble Decoiler, Double DecoilerFabr. No. 5775 Year of construction approx. 1995Coil weight 50 kg per sideCoil width max. 130 mmCoil inner diameter 155 - 445 mmCoil outer diameter 850 mmFeed washers 850 mmThrust rings 850Middle reel shaft to reel foot 980 mm- Reel structure manually rotatable by 180 with locking steps- central spread via rotary lever adjustment- mechanical disc brake, adjustable brake shoes via knurled screwSpace requirement
This 3-axis DMG MORI CMX 800V was manufactured in 2020. It features an X-axis travel of 800 mm, Y-axis travel of 560 mm, and Z-axis travel of 510 mm. The machine has a maximum spindle speed of 12,000 rpm and a robust table load capacity of 800 kg. If you are looking to get high-quality machining capabilities, consider the DMG MORI CMX 800V vertical machining centre we have for sale. Contact us for further details.
Welding fume extraction for wall mounting, extraction unit KEMPER type 85400Fabr. No. 279092 built in 1997Volume flow rate 1700 m3/hstat. Pressure 2000 PaSuction connection 250 mmEngine power 1.5 kWNeergized connection 400 Volt, 50 Hz- Centrifugal fan- Designed for a mechanical air filter with approx. 99% separation efficiency- Main filter defective, (surcharge for new main filter, 195,-- EUR net)- Joint suction pipe 150 mm, approx. 2 meters long- Suction pipe with 3 joints and suction funnel (adapter connection to the filter housing is missing)-
Conveyor belt, belt conveyor, belt conveyor MOVING (Sweden) Type BGL22-02-4000-800Order No: 4019584 year of construction 2004Effective length: 3900 mmBelt width: 800 mmBelt length: approx. 8100 mmOverall height frame profile: 120 mmDeflection pulley diameter: 105 mmBelt speed: approx. 10 m/min. Conveyor belt height: approx. 900 to 1300 mmMotor power: 0.25 kWNerg connection: 400 volts, 50 Hz.- Drive via ABB/ geared motor- Movable on 6 fixed castors with brake- Inclined position of the conveyor belt due to different heights of the 3 mobile footrests -
Bottle washer Klinger type: Euro Class 24/1/844 Capacity: approx. 10,000 bph Steam-heated incl. PCL Siemens S7 suitable for bottles of 200 ml - 1,000 ml Bottle diameter: 50 - 90 mm Bottle height: 110 - 330 mm Currently set up for: - 330 ml longneck - 500 ml longneck - 330 ml swing-top bottle - 500 ml swing-top bottle Dimensions: Length: 10,000 mm Width: 395 mm Height: 285 mm Weight: approx. 20 t
Max. punching and shearing capacity: 800 kN For example, punches 25 mm holes in 20 mm steel Shears on the flat steel shear on 350 mm to 15 mm steel Further technical data on request With an assortment of stamps and dies as desired
Interroll Rising falling Incline belt conveyor with leading belt GF 4778 (3888+890)-690-580 RA2365 Technical data: Conveyor length (NL): 4778 mm ( 3888 mm riser segment + 890 mm leading ) frame width (NB): 690 mm belt width (GuB): 6580 mm Overall height (BH): 120 mm, 360 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0.6 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2022 condition: Ausstellungsstück Conveying length in mm: 4778 (3888+890) Nominal / outside width in mm: 690 Belt width in mm: 580 Driven: YES Engine type: ...
Interroll Rising falling Incline belt conveyor with leading belt GF 7028 (6138+890)-690-580 RA2366 Technical data: Conveyor length (NL): 7028 mm ( 6138 mm riser segment + 890 mm leading ) frame width (NB): 690 mm belt width (GuB): 6580 mm Overall height (BH): 120 mm, 360 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0.6 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2022 condition: Ausstellungsstück Conveying length in mm: 7028 ( 6138 + 890 ) Nominal / outside width in mm: 690 Belt width in mm: 580 Driven: YES Engine ty ...
Interroll Rising falling Incline belt conveyor with leading belt GF 19782 (810+175+17907+890)-690-580 RA2363 Technical data: Conveyor length (NL): 19782 mm ( 810 + 175 mm arch + 17907 mm riser segment + 890 mm leading ) frame width (NB): 690 mm belt width (GuB): 6580 mm Overall height (BH): 120 mm, 360 mm with motor Angle: 15° Supporting feet: optionally available Conveying speed (v m/s): 0.6 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2022 condition: Ausstellungsstück Conveying length in mm: 19782 ( 810 + 175 + 17907 + 890 ) Nominal / outside wi ...
Interroll Rising falling Incline belt conveyor with leading belt GF (810+175+2800+890)-690-580 RA2362 Technical data: Conveyor length (NL): 4675 mm ( 810 + 175 mm arch + 2800 mm riser segment + 890 mm leading ) frame width (NB): 690 mm belt width (GuB): 6580 mm Overall height (BH): 120 mm, 360 mm with motor Angle: 15° Supporting feet: optionally available Conveying speed (v m/s): 0.6 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2022 condition: Ausstellungsstück Conveying length in mm: 4675 (810+175+2800+890) Nominal / outside width in mm: 690 Belt ...
FAS discharge flap belt conveyor GF 1380-800-600 RA2419 Technical data: Conveyor length (NL): 1380 mm (800 mm conveyor belt + 580 mm flap) Frame width (NB): 800 mm Belt width (GuB): 600 mm Construction height (BH): 435 mm support feet: optionally available Conveying speed (v m/s): adjustable between 0,025 and 0,883 m/s with frequency converter Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0.25 lifting and 0.37 conveyor belt Side guide distance: 655 mm Maximum recommended package size: 600 x 450 mm Optionally available: Supports to increase the delivery height Frequency converter Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: good (used) Conveying length in mm: 1380 Nominal / outside width in mm: 800 Belt width in mm: 600 Driven: YES Engine type: SEW Getriebemotor KW: 0,25/S1, 0,37/S1 scope of delivery: including side g ...
Transnorm belt conveyor 820-600-500 RA2421 The Transnorm belt conveyor is from 1999 and in a good (used) condition. It is perfect as a feeder belt and has a Van der Graaf brand motor. Supports are not included in the delivery. These are available as an option. Technical data: Manufacturer: Transnorm Type: TS 1100 belt conveyor Year of manufacture: 1999 Condition: good (used) Motor: fully functional conveying length (FL): 820 mm nominal/outer width (NB): 600 mm belt width (GB): 500 mm overall height (BH): 80 mm motor height (MH): 545 mm Motor type: Van der Graaf drum motor TM 113 B25-434 Z Motor power: kW 0.55 230/400 V 50Hz Weight: 60 kg Scope of delivery: without supports (if required, please ask) Optional: supports We can also extend the conveyor to your needed dimension Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 1999 con ...
Transnorm belt conveyor 800-600-500 RA1986 The Transnorm belt conveyor is from 1999 and in a good (used) condition. It is perfect as a feeder belt and has a Van der Graaf brand motor. Supports are not included in the delivery. These are available as an option. Technical data: Manufacturer: Transnorm Type: TS 1100 belt conveyor Year of manufacture: 1999 Condition: good (used) Motor: fully functional conveying length (FL): 800 mm nominal/outer width (NB): 600 mm belt width (GB): 500 mm overall height (BH): 80 mm motor height (MH): 545 mm Motor type: Van der Graaf drum motor TM 113 B25-434 Z Motor power: kW 0.55 230/400 V 50Hz Conveying speed: 2,8 m/s Weight: 60 kg Scope of delivery: without supports (if required, please ask) Optional: supports We can also extend the conveyor to your needed dimension Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Co ...
Wheel loader 40 kw/55 hp 3-cyl.- Perkins Turbodiesel, all-wheel drive, articulated steering, year of construction 1990, operating hours: 6430, tires BKT 14.5-20 MPT 567 12 PLY, tread depth approx. 90 %, mechanical quick coupler, loading bucket, stacking device with pallet forks 1100 mm Machine weight approx. 5.5 tons, bucket capacity approx. 0.85 cbm. Age and use-related wear, paint defects, play in the articulated joint (adjustable), windshields complete, direction switch, fuel pump and hydraulic hoses in the articulated joint already replaced. Static tipping load straight / kinked 3530 /3175 kg, lifting capacity 50.6 kN (Information from sales manual Zeppelin, without guarantee). Engine and hydrostatic drive in order, no leaks. Foot brake rusty, locking brake works. Electrics with defects (e.g. front lighting, switching gears). Age- and use-related optical defects and traces ...
Kannegiesser roller conveyor Vectura RB 800-960-890, not driven RA1301 Technical data: Conveying length (NL): 800 mm Frame width (NB): ca 960 mm Roll width (RL): 890 mm Height/band run (BH): 900 mm +/- 100 mm height adjustment Number of support feet: 2 pieces Drive: without Roller: Ø = 30 mm, grey, plastic (two steel) roller distance (pcs.): 35 mm Pitch: 2° degrees Year of construction: 09/2018 Special feature / accessories: 1x emergency stop switch 1x main switch 2x light barrier 1x end plate 50mm high All prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2018 condition: good (used) Conveying length in mm: 800 Nominal / outside width in mm: 960 Roll width in mm: 890 Roll division in mm: 35 Driven: NO scope of delivery: including supports For individual, professional advice, simply contact us. Simply contact us by phon ...
Key data: 400 mm
What is sold is a Machine name: Automatic band saw Manufacturer: Bomar Model: CLS 800.400 Year of construction: 2017 Condition: defective relay Dimensions: 3850 x 1650 x 2250 mm Weight: 2800 kg A relay on the machine is defective and can be replaced if desired.
800 litre cleaning tank/ storage tank made of V2A Properties: Volume 800 L Material V2A (AISI 304) 1.4301 Total height 2600 mm Cylinder height 1100 mm Inner diameter 1000 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Last Use: Chemical Industry Description: Topsoil: curved bottom Threaded Socket DN 65 Manhole DN 400 Agitator with steam heating inlet Tank cylinder: Beading Subsoil: Cone base screwed on with pedestal forward-drawn residual drain pipe with disc valve DN 50
Vertical stainless steel tank of the APV BAKER IBERICA brand, 4,800 liters., manufactured in 1989, the equipment has a configuration on legs, with upper and lower bottoms of conical geometry and agitation system by means of a three-blade propeller. The tank is equipped with a Ø450 mm upper manhole, two Ø180 mm sight glasses and different connections for process integration. It has a side socket for sampling, DIN20 and 3/4" side connections and DIN32 and DIN50 top connections. The body and both bottoms are 3 mm thick. The discharge is 240 mm high with a 2" junction Volume Total capacity 4800 L Material: Stainless Steel Technical characteristics Year of manufacture 1989 Vertical Orientation and Installation Tripala helix agitation On legs Tapered bottom Tapered top bottom Manhole on top bottom Equipment dimensions Body height 1000 mm Body thickness 3 mm Bott ...
Technical data of the pallet rack stand: Shelving system: Dexion Type: Speedlock P90 The scope of delivery includes: 01x Pallet rack stand, used Material colour: sendzimir galvanised Frame profile: M Profile size: P 90 x 75 x 1.80 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) Height: 4,000 mm Depth: 1,100 mm General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.
Technical data of the pallet rack stand: Shelving system: Dexion Type: Speedlock P90 The scope of delivery includes: 01x Pallet rack stand, used Material colour: sendzimir galvanised Frame profile: M Profile size: P 90 x 75 x 1.80 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) Height: 2,000 mm Depth: 1,100 mm General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.
A welding machine Pfaff including a rotary shear Kuris and an unwinding device MK is available. 1) Welding machine Pfaff 8309. 2) Rotary shear Kuris BOM 101. 3) Unwinding device MK Sewing Technology Systems. Documentation available. An on-site inspection is possible. The system is dismantled and ready for loading.
Technical data of the pallet rack crossbar: Shelving system: Bito Type: PL 38 The scope of delivery includes: 01x Pallet rack crossbar, used Material color: black Box profile: 82 x 50 mm Truss type: PT22.082LN Agraffe: 3 HK (hook) Clear width: 2,200 mm Max. load per pair of trusses 2,200 kg, with the same weight. Distributed load 02x Locking pins, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.
Key data: 1500 KG
Technical data of the pallet rack crossbar: Shelving system: Bito Type: PL 38 The scope of delivery includes: 01x Pallet rack crossbar, used Material color: black Box profile: 104/82 x 50 mm Truss Type: PST22.104LN Lowering for chipboard: 22 mm Agraffe: 3 HK (hook) Clear width: 2,200 mm Max. load per pair of trusses 1,500 kg, with the same weight. Distributed load 02x Locking pins, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.
max. format 78 x 120 cm Year of construction 2012 Fully Automatic Paper Folding Machine Computer control with touch screen Navigator Control Pallet feeder with Vaculift and Vacubelt 4 fold pockets in the parallel fold section Automatic folding pocket adjustment Automatic folding roller adjustment Knife shaft cassette 2 folding swords in the crossfold section Automatic folding blade adjustment 1 more fold pocket after the 1st cross break Palamides alpha 500 Stacking Delivery Delivery date: immediately from stock Price on request. We supply and install worldwide.
Technical data of the steel girder: Manufacturer: Stow Type: Pal Rack NS The scope of delivery includes: 01x Steel beams, used Material colour: orange Box profile: 100 x 50 mm Agraffe: 4 HK (hooks) Overall length: 3,835 mm Note: The steel girders were attached to a length of between 2,700 - 2,800 mm welded on a plate. (Dimensions: approx. 200 x 110 x 50 mm (LxWxH) Since these are second-hand goods, scratches, damage, welds or rust roots! General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.
A step conveyor Köberlein & Siegert is available. Step width: 850mm, step height: 600mm, step depth: 5.5mm, machine depth: 1300mm, machine height: approx. 3500mm. An on-site inspection is possible.
FAS belt conveyor 850-530-400 RA2427 Manufacturer: FAS Motor: without motor, driven by overdrive Conveyor length (FL): 850 mm Nominal/outer width (NB): 530 mm Belt width (GB): 400 mm Profile height: 170 mm Drive roller: Head drive Optional: supports Side guide Price: plus VAT from central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: gut Conveying length in mm: 850 Nominal / outside width in mm: 530 Belt width in mm: 400 Driven: Übertrieb scope of delivery: ohne Motor, without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartn ...
Transnorm belt conveyor belt conveyor belt flap belt Smart Sort GF 1450-800-700 RA2037 Technical data: Conveyor length (NL): 1450 mm frame width (NB): 800 mm, 150 with motor Belt width (GuB): 700 mm headroom (BH)/transfer height : 800 mm Conveying speed (v m/s): 1.47 Drive: SEW gear motors, with brake at angle adjustment Electrical data: 50Hz V380-500, kW 0,37 drive belt and 2,2 drive angle height of sorting out bottom: 500 mm sorting height top 1200 mm Angle adjustment speed: 1s from min to max year of construction: 2009 Special feature / accessories: 4x proximity sensors for angle determination Optionally available: Side guide one-sided and both-sided Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2009 condition: Ausstellungsstück Conveying length in mm: 1450 Nominal / outside width in mm: 800, 1150 Belt width ...
Key data: 830 mm, 630 mm, 630 mm
Year of manufacture 2004 Heidenhain 530 (MC422) Spindle hours approx. 17500 32 Fold Tool Changer Working area 830 x 630 x 630 mm Feeds 15000 mm/min Rapid traverses 30000 m/min Tool holder Motor spindle 12000 rpm IKZ, chip conveyor, el. Handwheel, Heidenhain Button, Blum Laser, Rinsing device, filter system Weight approx. 9000 kg
Transnorm belt curve conveyor left 90°-1000-800-IR900 RA2001 Belt curves are frequently used in intralogistics for the internal transport of unit loads and are an indispensable part of modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive, over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the smoothest possible running. Technical data: Type designation: belt curve conveyor Stand width (NB): 1000 mm Belt width (GuB): 800 mm Motor width (MB): +200 mm overall height (BH): 210 mm inner radius (IR): 900 mm Conveying angle: 90° degrees Conveying speed: Please contact Drive: SEW gear motor with Movi-Mot Electrical data: 50Hz V230/400, kW 0,37 /S1 Year of construction: 1992 Included: Side guide on both sides and frame Optionally available: Suppo ...
Machine name: Filter press used Manufacturer: Netzsch Type: 800/32 Year of Make: 1984 Design: Side-spar press Filter pressure: 15 bar Press capacity: approx. 480 litres Procedure: Closed Filter area: approx. 34 m2 Plate format: 800 x 800 mm Number of plates: 32 Panel material: Polypropylene Plate Conveyor: Automatic Filter Cloth Washer: No Panel package length: approx. 2000 mm Cake thickness: 30 mm Closing pressure: 350 bar Dimensions: L 4,500 x W 1,700 x H 2,000 mm Empty weight: approx. 5000 kg Accessories: A control cabinet, a hydraulic system, a light barrier & drip plates. Condition: Used Price: On request
Transnorm accumulation roller conveyor 24V 2520-880-800 RA1857 Make: Transnorm Running direction: both directions Roller width (RB): 800 mm Nominal/outer width (NB): 880 mm Length: 2520 mm Roller diameter: 50 mm Roller distance: 60 mm Motor Roller conveyors: SEW E19I 09107 24V Height frame: 100 mm including two controlers Total 4 stowage spaces Conveyor speed: freely adjustable up to 1,25m/s Optionally available: Supports Features: condition: very good (used) Construction year: 2019 nominal voltage: 24V Conveying length in mm: 2520 Nominal / outside width in mm: 880 Roll width in mm: 800 Roll division in mm: 60 Driven: YES Engine type: SEW E19I 09107 scope of delivery: including side guides without supports For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to ...
maximum number of results exceeded
please refine your search
