presse brake 600 used for sale

Machine grinds in linear pass, Extremely robust design. Specifications: Workspace: Largest sanding width 150 mm Highest working height for new grinding tool (workpiece passage) 50 mm Diameter of the grinding wheels 600 mm Speed upper grinding wheel 765 rpm Lower grinding wheel 765 rpm Circumferential speed: upper grinding wheel 24 m/s Lower grinding wheel 24 m/s Dimensions of the abrasive tools: Ø 600 x 75 x Ø 50 mm Workpiece feed speed infinitely adjustable from 35 to 350 mm/s Grinding wheel infeed: Total travel per grinding wheel 150 mm Grinding wheel feed servo motor controlled Dressing Unit: Servo Motor Controlled Grinding motors: 30KW Ges. Power requirement approx. 62KW Dimensions of the machine: Length approx. 2750 mm Width approx. 2050 mm Height: approx. 3000 mm Footprint: Length: approx. 4350 mm Width: approx. 5020 mm Weight: 6500 kg The m ...

Description Angle 90 Bandwidth 500mm Right-hand side Height-adjustable Retrofit with frequency converter possible for an extra charge 2 pieces available

ERMAKSAN LASERMAK 6000 6X2 laser cutter was produced in 2014. Technical parameters: – laser source: 6000 W CO2-laser GE Fanuc C6000i-Model C – RF-excitation: 2 MHz – power stability: ± 2% (power monitor) – laser wave length: 10.6 μM – beam mode: Fanuc Low Order Mode – laser shutter: mechanical safety shutter – laser gas composition: CO2 / He / N2 – gas consumption by laser: 20 l / h – cooling water flow rate: 250 l / min – maximum cutting capacity: mild steel 25 mm (during tests the maximum achieved: 30 mm), stainless steel 15 mm, aluminum 12 mm - machine activation time: 22899 h - working time: 10122 h - cutting time: 8429 h – total energy requirement: 100-120 kW – cutting head focal length: 5 -7” -10 inch – maximum worksheet size: 6150 x 2000 mm – maximum burden capacity: 4000 kg – machine axes: 5 axes [X, Y, Z, U (X2), V] – axis ...

Key data: 600 , 97 , 30

Manufacturer: Arburg Type: 320 C 600 - 250 Year of construction: 2003 Control: Selogica Closing type: Hydraulic Closing force: 600 kN Tie bar spacing: 320 mm x 320 mm Plate size: 446 mm x 446 mm Tool height: min 200 mm Opening distance: 350 mm Plate spacing max.: 550 mm Screw: 35 mm Stroke volume: 106 ccm / 89 gram PS Injection pressure: 2470 bar general Engine: 15 kW Heating: 5.5 kW Dimensions: 3.4 m x 1.5 m x 1.6 m Weight: 2080 kg Screen text: German Optional extras Core train x1 Robot interface Sorting flap Hot channel integrated

Volume : 618 ltr. Material : areas in contact with the product in stainless steel Working pressure : 3 bar Working pressure jacket : 3.5 bar temperature: 145°C Temperautr jacket : 148 ° C Vacuum drum : 50 mbar;

PLASTIC BAGS MAKING MACHINE VAMA VC 600 Germany made in 2015. Technical data Manufacturer: VAMA GmbH Model: VC 600 Production year: 2015 Technical parameters The width of the film maximum: 600 mm The maximum length of the bag: 1200 mm Film thickness: 25-80 μm weld Capacity: 60 - 90 bags per minute Rolling rollers 2 with roll diameter: 700 mm Stacking position: 25-50 pieces Machine for the production of plastic bags Excellent condition, located in Poland

Technical details x-travel 600 mm y-travel 560 mm z-travel 510 mm Steuerung Siemens Slim Line Multi Touch Control Main spindle: Max. speed 15,000 rpm/-1 Drive power - main spindle 20 / 14.5 kW Max. torque 121 / 84 Nm Tool holder SK 40 Distance between spindle nose and table 120 - 630 mm Workbench: Table clamping area 900 x 560 mm max. table load 600 kg T-slots 5 Working height 850 mm Tool magazine: Number of tool positions 60 pos. Tool holder SK 40 max. tool diameter 80 mm max. tool diameter. with a free neighboring box. 130 mm max. tool length 300 mm max. tool weight 8.0 kg Tool-tool changeover time 2.4 sec Changeover time chip - chip 6.7 sec Feeds: Rapid traverse 30 m/min Feed force 5 kN Feed speed max. 30,000 mm/min Total power requirement 32 kVA Machine weight approx. 5.0 t Space requirements approx. 4.0 x 5.0 x 3.0 m

GLIMEK conical rounder CR-600 GM - exhibition machine, mint condition, year of construction: 2025 - working range 30 - 1,800 g, output range up to 6,000 pieces per hour, knitted troughs infinitely adjustable via handwheel, non-stick coating on cone and knitting troughs, infeed at 3 o'clock, outlet at 12 o'clock, knitted trough lower parts made of food-safe plastic, frequency converter for infinitely variable speed, blower for hot and cold air, mechanical flour shaker made of stainless steel rust-free, discharge belt with adjustable belt speed, 5 m connection cable and CEE plug, connected load: 3.7 kW, electrical connection: 400V/50-60Hz/3~

grinding diameter: 99999 mm grinding length: 99999 mm centre height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m We offer the overhauling of your Kellenberger U-machine. Mail serial number and foto of the machine and you will get an offer. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 250,350,450 mm grinding length: 600 mm centre height: 125,175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ±10 ° longitudinal feed of the table: 900 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 70 mm total power requirement: 6,5 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: 3,1 x 2,0 m Overhauled with geometric KELLENBERGER protocoll -2-axis DRO -Paper filtration Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erford ...

grinding diameter: 250,350,450 mm grinding length: 600 mm centre height: 125,175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ±10 ° longitudinal feed of the table: 900 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 70 mm total power requirement: 6,5 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: 3,1 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Geometrisch überholt und neu la ...

x-travel: 600 mm y-travel: 350 mm z-travel: 140 mm table surface area: 700 x 300 mm spindle taper ISO: 40 spindle turning speed range: 100 - 4000 U/min distance spindle center to column: 395 mm distance spindle nose and table: min. 170 -max. 550 mm control: TNC 407 milling feeds: 3 + 2000 mm/min rapid traverse: 5000 mm/min spindle drive: 5,5 kW total power requirement: 9 kW weight of the machine ca.: 1,9 t dimensions of the machine ca.: 2,5 x 1,8 x 2,2 m • control HEIDENHAIN TNC 407, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Loading caterpillar Hanomag D 600 functional, top engine

x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm spindle taper ISO: 40 spindle turning speed range: 80 - 4000 U/min transmission ratio: 18 feed range: 0,1 - 2000 mm/min rapid traverse: x = 4 / y = 3 / z = 5 m/min table load capacity: 250 kp voltage: 380 V / 50 Hz spindle drive: 5,5 kW total power requirement: 16 kVA weight of the machine ca.: 2,6 t dimensions of the machine ca.: 3,8 x 4,3 x 2,0 m • CNC-control system 432 E • Operating hours: 37719 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 320 mm turning diameter over slide rest: 220 mm turning length: 600 mm turning diameter in the gap: 320 mm turning speeds: 60 - 1650 U/min centre height: 160 mm spindle bore: 38 mm tailstock quill taper MT: 3 MK connected load frequency: 400 V total power requirement: 1,1 kW weight of the machine ca.: 340 Kg dimensions of the machine ca.: 1,4 x 0,75 x 0,7 m Center lathe with: 3-jaw chuck 160 mm. 4-jaw chuck 200 mm. Faceplate 200mm Fixed bezel Continuous bezel 4-way steel holder. Halogen machine light Chip tray, chip protection wall Hardened and ground bed tracks Longitudinal and cross feed Complete coolant system Forage protection Set of change gears Machine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: siehe TD mm double T-iron on the x-axis: siehe TD mm U-iron on the x-axis: siehe TD mm total power requirement: 120 kW weight of the machine ca.: 78 t dimensions of the machine ca.: 6100 x 5150 x 4300mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1 x used double-sided Rotoles S600 with 2 grinding units and 1x brush Working width 600mmm Speed 60m/min Calibration milling planing machines with feed rollers Best accuracy of the boards and excellent results in delamination attempts, at any speed. ROTOLES S calibration machines are the best choice for calibrating boards and slats before gluing. Rotoles S calibration milling planing machines with feed rollers Best accuracy of the boards and excellent results in delamination attempts, at any speed. ROTOLES S calibration machines are the best choice for calibrating boards and slats before gluing.

completely stainless steel suitable thermo-oil heated (300 kW) 12 kW Frying length 7,500 mm Track width 600 mm Top band infinitely variable speed Oil pump Oil level control Suitable for fire protection Filter Dirt transport Lid mechanical lifting device insulated lid Dimensions (L x W x H) : ± 10,900 x 2,000 x 3,500 mm Siemens PLC control type S5 95U+ HMI Simatic OP27 suitable for CIP cleaning + Oil Management System Type VTC 2000 single-walled tank Oil pump Dimensions (L x W x H) : ± 1,700 x 1,1600 x 3,400 mm Oil level indicator

x-travel: 6000 mm y-travel: 2000 mm z-travel: 3000 mm Control: heidenhain TNC 415 total power requirement: 34 kW weight of the machine ca.: 31 t dimensions of the machine ca.: 7000 mm m Stocknumber 1110055 Type of machine CNC Floortype milling machine Make ZAYER Type KCU6000 Build in 1992 Type of control Heidenhain TNC 415 X-stroke (mm) 6.000 Y-stroke (mm) 2.000 Z-stroke (mm) 3.000 Speeds (Rpm) 20 - 1.800 Admission in spindlehead BT50 Feeds X (mm/R) 5 - 5000 mm/min Feeds Y (mm/R) 5- 5000 mm/min. Feeds Z (mm/R) 5- 5000 mm/min. Rapid feeds 10.000 mm/min. Total Power (KW) 34 Lenght (mm) 11.000 Width (mm) 2.500 Height (mm) 7.000 Weight 31.000 Kg Additional information Juaristi MG6 turntable: 1500 x 1200 mm Cooling system: 2.5 Bar Tool cooling: 15 Bar The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

-Model Colatrice REL 600 -with digital foil keyboard -380 volts -50 Hz -Year of construction 2001

Plasma cutting "CR" 6000x2500 with two Hyperterm HT 2000 and HD 3070 generators complete with filter

Box washer, Fabr. Drill, type: R 20, in VA, with hinge belt transport chain, pump, 2 VA screens, control cabinet, YOC 1989 Box washer, Fabr. Klann, type: 600, with large pump, with screening box with 3 VA screens, YOC 1988, dismantled Box washer, Fabr. Kettner/Sotec, Type: WAH 18, 1,800 Ka/h, with control cabinet, YOC 1990 Prices on request

CTS Type: T-70/600/S Temperature test chamber water-cooled Refrigerant: Converted to R-452A Regulation: - 32 bit controller - LCD control panel - Digital display of target and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for on-site test object control Technical performance data Temperature checks: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K temporally Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat irradiation approx. 2500 W at +20°C approx. 2500 W at + 0°C approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25 °C, Nominal voltage 400V, without test material, without irradiation and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions Height, a ...

Flanges and Divereses

Folding and Inserting Machine: speed: upto 4.000 per hour, maximum monthly performance: 70.000, maximum annual output: 600.000, power required: 230V, noise level:

Used Ruehle tumbler. Model MKR 600. Last service in 2021. RUEHLE MKR600 The RUEHLE drum tumbler-mixer combines many technical functionalities in the field of plasticizing technology. It is used, among others, in: - massaging - mixing - pickling - dry salting The RUEHLE tumbler model MRK600 is equipped with a highly efficient cooling unit and a very high-performance vacuum pump. In the computer software, we can determine the degree of product cooling. The band available to the user ranges from -15 ° C to + 15 ° C. The mass input determines the vacuum level, which can be changed at any time. The possibilities of plastic processing are just one of the advantages of the machine. It has also been equipped with a mixing function - thanks to which the raw material processing time is shortened to 10 minutes. Despite the typical massaging or mixing functions, the device  ...

USED HOSOKAWA PC 600 GRANULATOR REF.: C5705 General characteristics: Manufactured by HOSOKAWA Model PC 600 Year built 2001 Motor characteristics: Voltage 230/400 V Current 5.7/3.3 A Power 1.5 kW Frequency 50 Hz - 3f Rotational speed 1435 rpm Reducer characteristics: Rotational speed min. 63 o max. 316 rpm

This brand new machine is part of Caterpillars rebuild program, Ask us for more information., , Available in 50Hz - 400V , Prime rating 1.500 kVA, Standby rating 1.600, , Controls: EMCP4.2 / ADEM 3; Power [PS]: 1740; Gross weight [kg]: 14000; Engine: Caterpillar 3512B; Accessories: Battery, Control Panel

RS Simulators Here we offer a test cabinet. Water-cooled Temperature range: -40°C to +180°C Test room dimensions: 850mm x 850mm x 800 mm (WxHxD) External dimensions: 1100mm x 1850mm x 1500mm (WxHxD) Current consumption: 13.5 A Refrigerant: R404A Connection voltage: 3x400V/N/PE 9A Weight: approx. 800 kg Type: TS 600/45 Explosion-proof operation not tested but Max 160°C in this Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information reserved!) We are happy to answer any further questions you may have on the phone.

Clean room pass box. 2-doors Pallet air Shower UV. Pass boxes Air Shower UV is aimed at dust removal and disinfection processes using ultraviolet light (UV) without wastes. Thanks to the fans in the unit and the induction nozzles, dust is removed and collected in the equipment’s filters.

: 600 mm : 500 mm : 400 mm : 1000x500 mm : 1200x250 mm : 40-3200 U/min : DIN 2080 ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine Details Stock-No. 1105-03507 Type of machine Machining Center - Vertical Make FAMUP Type MCX 600 Year of manufacture 1994 Type of control CNC Storage location FRANCE Country of origin italy Delivery time immediately Freight basis EXW 'as is where is Technical details x-travel 600 mm y-travel 400 mm z-travel 400 mm Controls FANUC OM - X-axis traverse 600 mm - Y-axis traverse 400 mm - Z-axis traverse 400 mm - number of controlled axes 3 - table surface (left-right) 400 mm - table surface (front-back) 400 mm - workpiece load (max) 300 kg - spindle revolutions (max) 6000 rpm - tool fixture ISO SK 40 - drive power (max) 11 kW - number of positions 18 - tool diameter max. 75 mm - tool changing time 2 s - space requirements length 3200 mm - space requirements width 2,900 mm - total height 2600 mm - total weight approx. 3500 kg Additional information F ...

Headquarters. Edge stiffener extraction

Very high-quality CNC – controlled under-table two-unit double miter precision circular sawing machine with schifter cutting device (heavy version - 3,500 kg dead weight) Brand new, immediately available from stock (subject to prior sale). For the precise and rational cutting of large and heavy profiles made of aluminium - non-ferrous metals - various plastics. The machine can be used both for single cutting - when cutting with two sawing units at the same time (smallest section length 450 mm / largest section length 5,000 mm) or in automatic mode – when used as single-unit circular saw machines, so that Section lengths from 5 mm to 15,000 mm and longer possible. Five CNC axes for the electronic rotation of the saw tables infinitely variable over the entire rotation range, the vertical inclination of the saw blades electronically infinitely variable bet ...

Very high-quality CNC – controlled two-unit double mitre precision circular sawing machine (heavy version - 2,500 kg dead weight) Brand new, immediately available from stock (subject to prior sale) For precise and rational cutting even of large and heavy profiles made of aluminium - non-ferrous metals - various plastics. The machine can be used both for single cutting - when cutting with two sawing units at the same time (smallest section length 370 mm / largest section length 6,000 mm) or in automatic mode – when used as single-unit circular saw machines, so that Section lengths from 5 mm to 15,000 mm and longer possible. Three CNC axes, electronic inclination of the saw units infinitely variable over the entire inclination range. SCHNEIDER® feed motors and electronic motor controllers. CNC control with Windows 10 operating system and 10.4" color di ...

grinding diameter: 350,450 mm grinding length: 600 mm centre height: 175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ±10 ° longitudinal feed of the table: 900 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 70 mm total power requirement: 6,5 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: 3,1 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines. Foto von bereits gelieferter Maschine m ...

Gurutzpe Super A lathe. Distance between centers: 6.000mm. Swing: 1020mm. Swing in carriage: 745mm. Swing on gap: 1440mm. Spindle bore: 140mm. Speeds: 16 (9-500rpm). Equipped with 4 independent chuck and steady rest. Equipped with new universal chuck of 500mm. Equipped with new DRO Fagor. Equipped with new Multifix turret. Motorized carriage. CE protections and european certificate for second hand machines.

1250 x 2500mm TLF 2000w Laser STOPA Sheet storage, SheetMaster, ToolMaster, SortMaster Year: 2005

UKM 600 DG High quality semi-automatic under-table double miter circular sawing machine, for cutting profiles and solid material made of aluminum – non-ferrous metal – plastics – wood and other soft materials Largest saw blade diameter 600 mm Cutting range - 0° - 400 x H 135 mm, 245 x H 100 mm, 190 x 190 mm - 45° - 160 x H 100 mm, 145 x 145 mm Saw blade speed 2,800 rpm Stepless miter adjustment + 10°/-170° with grid points at +/- 45° and 0° Saw blade drive power 3 kW Dimensions approx. 1.1 x 1.2 m x H 1.65 m Weight approx. 310 kg

FlowCook completely stainless steel suitable for thermo-oil heating Belt length ± 13,000 mm Track width ± 600 mm Executing belt Belt washing system electric lifting device for the cap Total dimensions (L x W x H) : ± 15,000 x 2,200 x 3,000 mm

Travel distances: 350 x 250 x 315 mm [ X x Y x Z ] Table size X: 576 mm Table size Y: 400 mm workpiece weight: 500 kg C-axis Pinole recording: EROWA

An original control cabinet that was dismantled by PAAL Konti 425 B, built in 1991. It is based on SIEMENS S5 controller. It is also suitable for other models such as: Konti 200, 275, 325, 425, 500, 600, 700, depending on model and drive power. A complete control cabinet, functional We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Technical data for the pallet pull-out: Shelving system: SSI Schaefer Type: PR 600 The scope of delivery includes: 01x Pallet pull-out, used for shelf depth: 800 mm Material color: blue Total depth: approx. 810 mm Total width: approx. 1,295 mm Height: approx. 265 mm Extension: 100 % = 740 mm Weight|pcs.: approx. 100 kg Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

An original control cabinet that was dismantled by PAAL Konti 425 B, built in 1991. It is based on SIEMENS S5 controller. It is also suitable for other models such as: Konti 200, 275, 325, 425, 500, 600, 700, depending on model and drive power. A complete control cabinet, functional We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Control cabinet for PAAL accounts 200, 275, 325, 425, 500, 600, 700 after renovation An original control cabinet, the one from the PAAL Konti 425 B/K, built in 1992, with the cross binding. It is based on SIEMENS S5 controller. It is also suitable for the other models such as: Konti 200, 275, 325, 425, 500, 600, 700, depending on model and drive power, also for the variant with the cross binding. A complete control cabinet, functional, after renovation We have several channel balers and balers in our warehouse and we cordially invite you to contact us!