136,845 used machines on RESALE, but how to find them? Machine Search
Continuous press Manufacturer: Wemhöner Model: VSF Year of construction: 1972 Panel dimensions: 3600 x 2200mm Heating medium: Oil Feeding Destacking Total length approx.: 12.000mm
Embossing press - embossing machine Hydraulic Pressing surface, 600 x 2700mm Heated pressing surface
Piferoen type 5H baler complete with conveyor. Baling press 6.30m x 2m x 1.6m approx. Conveyor 7.5m x 1.2m x 0.80m approx.. Chamber size (WxDxH) 108 x 59 x 105 cm approx. Suitable for baling textiles and other products. Bales can be completely covered for protection of material.
Vertical baler HSM V-Press 860 plus, built in 2021 Technical data: Manufacturer: HSM Type: V-Press 860 plus Year of Make: 2021 Hours: 423 Pressing force: 60 t Drive power: 4 kW Filling opening: 1195 x 645 mm Filling height: 1114 mm Bale size: approx. 1200 x 1200 x 780 mm Bale weight: 480 kg Binding: manual Theor. Idle cycle time: 25 s Theor. Pressing capacity: 12 cbm/h Dimensions: 1800 x 1253 x 2990 mm (WxDxH) Weight: 2213 kg Materials: foil, paper, cardboard boxes Note: The press is in good condition. It has been checked and tested by us. You can find a video on our website or Youtube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. Th ...
SPECIFICATIONS: Cold press Working table mm: 2500 x 1300 No. 4 pistons Vertical stroke: 450 mm
Code: 0136 Brand: ITALPRESSE Model: FORMATIC 20.9 Hydraulic fluid membrane press Two sided lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2000 x 900 Daylight mm 325 Cylinder stroke mm 325 Heating electric boiler Kw 27 Thrust ton 300 ton N° 3 thrust cylinders Hydraulic unit power Kw 5,5 Pressure control manometer Automatic pressure reset Opening timer Overall dimensions mm 3300 x 1400 x 2400 h Weight kg 8100
Nominal force: 2500 ton Ram stroke: 190 mm Number of strokes in 1 minute: 20 Shut height: 800 mm Bolster plate-to-ram adjustable stroke: 15 Table size: 1250x1400 mm Weight 124.230T
2000 Ton Sumitomo Hot Forging Press line Year 2006 Stroke 350 mm (13.78") Strokes per min 75 Shut height 850 mm (33.47") SlideAdj. 7 mm (.27") Ram size 1200 mm LR X 1300 mm FB Bed size 1320 mm LR X 1300 mm FB 4 stage transfer system Slide knockout Bottom knockout Scrap System Dual Die Changer Extra Die Shoes Billet Heater and Billet Saw Also Available This line was used by HONDA to make transmission gears, It takes a billet, cuts it to size, heats it to 1300 C then the press hits it 4 times. It can determine good from bad parts, the bad parts get sent to a quench tank, the good parts get sent into a cool down conveyor that you can pick the parts up by hand at the end. The entire system was ran by one operator.
Roller compactor, miner - used - : Price from location: only 950.-€ (net) Manufacturer: Bergmann Type: PS 8100E Year of Make: 1990 Serial number: 05 3658 2845/90 Press pressure: to Net weight: 750kg 400V, 5.5kW, Condition: good Available: from Q4/2026 Location: Hamburg Efficient waste compaction: A special steel drum enables effective collection, crushing and compaction of the waste, reducing its volume by up to nine times. Continuous filling: The machine allows continuous filling by all users. The feed chute can also be left open during the work process, which facilitates and accelerates waste compaction.
Used belt press made by Kreuzmayr model KEB 750, made of stainless steel. Designed for fruit and vegetable processing. Technical specifications: - Rated capacity: approx. 2000 kg/h (depending on the type of fruit and operating conditions) - Juice yield: up to 75% (from healthy, firm apples) - Length L: 2610 mm - Width W: 1450 mm - Height H: 1642 mm - Belt width/length: 750 mm / approx. 8000 mm - Working width/height: 688 mm / 0–50 mm, infinitely variable - Belt feed speed: infinitely variable 1.0–5.2 m/min - Automatic belt tension adjustment - Weight: 1100 kg - Power supply: 230V/16A/1.4kW - Drive motor: 240V/0.75kW/50Hz - Washing unit motor: 240V/0.18kW/50Hz - Required air pressure: min. 8 bar - Water consumption: approx. 3 l/min
Baler Strautmann, type BaleTainer, press force 60 t, year of construction 2012 Technical data: Manufacturer: Strautmann Umwelttechnik Type: BaleTainer Year of Make: 2012 Pressing force 60 t Total connected load 30 kW Bale dimensions 1,100 x 1,100 x 800 mm (W x D x H), 3 discs Bale weight up to 400 kg (3 discs) Binding 4-fold vertical Dimensions: 5,348 x 2,113 x 2,752 mm (L x W x H) Weight approx. 7,280 kg Materials: paper, cardboard, PET bottles, foil Note: The press is in working condition and has been inspected and tested. You can find a video on our website or YouTube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale a ...
Used double-belt press made by Voran, model: ZBP1100. New 2017. The Voran ZBP1100 belt press is fully automatic and operates continuously, requiring only minimal supervision. Smooth adjustment of speed and pressing force guarantees optimum juice quality and high efficiency, reaching up to 80 per cent. The belt press is versatile and can be used for various types of fruit (stone fruit must be pitted before pressing), berries, vegetables and for drying various materials. The juice is discharged from the machine via a fitted juice pump. Particular attention has been paid to ensuring easy access to all parts of the system and their easy cleaning. Intended use: pressing apples, pears, berries, grapes and other soft fruits Technical specifications - Capacity: up to 7,700 kg/h (actual capacity depends on the type and quality of the raw material) - Juice yield: 80% - Loading or un ...
Key data: 400 t, 800 mm
Oil-hydraulic double-column press 400 T with sliding table Press type: Double column press Thermally neutral 80 – 120 °C Number of operating pages 1 page Forces Pressing force max. 4000 kN Free tear-off force max. 400 kN Print build-up time Closed tool steel on steel Max. 4 sec. Dimensions: 3,800 mm long and 4,475 mm wide Max. opening width 800mm Stroke 800mm Table height above floor 1100mm Height above ground (height) approx. 4300 mm Hall height min. 5500 mm Parallel deviation at 20°C +/- 0.1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.2 mm/m Weight Total weight of the press without consumables and table top approx. 28 tons Press table Table size 1500x1500 mm Velocities Quick closing at 100 mm sec. Pressing speed 8 – 3 mm sec. Acoustic pressure Sound pressure level, measured at a height of 1.5m on the control pane ...
Inv. Num. : 6992 Type: LKT 250 Producer: METALPRESS Created: 1963 Parameters: Ram stroke: 120 mm Plunger adjustment: 100 mm Machine weight: 2700 kg
Baler Dixi 80 SLD, with lift/tilt device, semi-automatic, year 2017 Manufacturer: Dixi Type: Dixi 80 SLD Year of Make: 2017 Drive power: 11 kW, 400 V / 21 A Filling opening: 1,040 x 1,110 mm (WxL) Press force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (WxHxL) Bale weight: approx. 500-600 kg Binding: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (LxWxH) Machine weight: approx. 8,000 kg Materials: paper, cardboard, foil The press is in good condition. It has been checked and tested by us. You can find a video on our website or YouTube channel. We will also be happy to answer any questions you may have about the machine by phone from Monday to Thursday from 08.00 to 14.00 h. On Friday we are there for you from 08.00 to 13.00 h. Please note: All technical data refer to the manufacturer's s ...
used canning press / packaging press Manufacturer: WAGNER Type: WDSP 7000 Year of construction: 1993 specifications: Pressing force: 70 t Specific pressing pressure: 318 kg/cm² Drive power: 15 kW / 400 V Duct format: 550 x 400 mm Filling opening L x W: 1,150 x 550 mm Compaction chamber: 700 x 550 x 400 mm Total stroke: 2,100 mm Machine length: approx. 5,500 mm Machine width: approx. 1,920 mm Capacity: approx. 1.5 t/h (depending on material) Package size, WxHxL: 550 x 400 x 280 - 550 mm Package weight: approx. 20 - 40 kg (depending on the setting of the package length) Machine weight: approx. 3,500 kg
Specifications Maximum pressure: 54 tons Power supply: 400V / 7.5 kW Press force: 5.62 kg/cm² Year of construction: 2005 Bale size: 1200x800x1200 mm Productivity: approx. 2 bales/hr Bale weight: approx. 500 kg Price: on request Machine is fully functional, after technical supervision. Price also includes paint renovation.
Baler Dixi 60 SLD, built in 2015 Manufacturer: Dixi Type: Dixi 60 SLD Year of Make: 2015 Drive power: 7.5 kW, 400 V / 16.5 A Filling opening: 990 x 1,110 mm (WxL) Pressing force: 60 t Pressing cycle: approx. 47 s Bale size: 800 x 1,100 x 1,200 mm (WxHxL) Bale weight: approx. 370-410 kg Binding: 3-fold, manual Machine dimensions: approx. 4,150 x 1,725 x 2,035 mm (LxWxH) Machine weight: approx. 5,420 kg Materials: paper, cardboard, foil The press is in good condition. It has been checked and tested by us. You can find a video on our website or YouTube channel. The user manual and CE declaration are available. We will also be happy to answer any questions you may have about the machine by phone from Monday to Thursday from 08.00 to 14.00 h. On Friday we are there for you from 08.00 to 13.00 h. Please note: All technical data refer to the manufacturer's specificati ...
Specifications Maximum pressure: 12 tons Power supply: 380V/ 5.5 kW Press force: 2.5 kg/cm² Year of construction: 1985-1993 Bale size: 800x600x(600-1000)mm Productivity: approx. 3 bales/hr Bale weight: approx. 100 - 200 kg Price: on request Machine is fully functional, after technical supervision.
Key data: 200 t
Press brake – 200 T – Open width 1,600 mm For sale is a hydraulic press brake from the manufacturer DURENDUS with a maximum press force of 200 t. The machine has an open width of 1,600 mm, a maximum installation height of 1,200 mm and a stroke of 1,000 mm, making it suitable for bending, forming and straightening work in industrial use. Technical data + information: Press brake – 200 T – Open width 1,600 mm General information - Reference ID: ME-2026-A-180_DE-2026-ME-215-01 - Type: 2-column frame press - Manufacturer: DURENDUS - Press force: 200 T (adjustable) - Open width: 1,600 mm - Open height: 1,200 mm - Usable area ram: 1,500 mm - Table height from the floor: 850 mm - Overall dimensions (W × D × H): approx. 1,300 × 2,700 × 3,900 mm - Total weight: approx. 5,300 kg Hydraulic cylinders - Stroke: 0–1,000 mm - Working pressure: 270 bar - Cylin ...
Horizontal baler Dixi 80 SLD, with lift/tilt device, semi-automatic, year of manufacture 2019 Manufacturer: Dixi Type: Dixi 80 SLD Year of Make: 2019 Drive power: 11 kW, 400 V / 21 A Filling opening: 1,040 x 1,110 mm (WxL) Press force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (WxHxL) Bale weight: approx. 500-600 kg Binding: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (LxWxH) Machine weight: approx. 8,000 kg Materials: paper, cardboard, foil Note: The press is in good condition. The operating instructions are available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. T ...
Code: 0158 Brand: ITALPRESSE Model: LOCK FORM SYSTEM AIR - CE Standard Hydraulic air membrane press with loading and unloading - CE Standard 3-D coated on one face lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2650 x 1250 Piece height mm 55 Pressure control manometer Automatic pressure reset Opening timer
Inv. číslo: 4465 Type: PL-140 LC Výrobce: OMC Vyrobeno: 2014 Parametry: Příkon: 75 kW
Key data: 750 kN, 150 mm
Control: STE 328-89-1 1/2" complete TOX Powerhouse: S75.160.200.12D Table size: 996 x 695 mm Installation height: 600 mm Total stroke: 150 mm Power stroke: 10 mm Weight: 5700 kg Electrical connection 230 V
Offer 20202 Specifications: - max. pressing force 35 t - Projection to the middle of the ram 240 mm - Working height adjustable with hand crank 540 to 940 mm - 2 Hand control - Protective shield enclosure with light barrier - Material - Slide-in device - Pneumatic connection - Press control via SIEMENS SIMATEC OP 7 - Drive 400 V / 15.5 kW - Space requirement approx. W 1200 x H 2000 x D 2400 mm - Weight approx. 2500 kg
Nominal pressing force 4,000 kN Plunger stroke, adjustable in steps 30160 mm Plunger adjustment 180 mm Projection 515 mm Idle stroke rate 45 / min Option: infinitely variable 10 ... 60 / min Tool installation height at maximum stroke bottom and top adjustment 660 mm Table clamping area (WxD) 1,700 x 1,000 mm Table height above floor 1,005 mm Plunger clamping surface (WxD) 1,100 x 800 mm Pin hole in plunger 65 mm Main motor power 45 kW Height of the machine approx. 4,325 mm Weight of the machine 33,000 kg Control system - press safety control with redundant design and self-diagnosis as well as a status and error display in plain text Stepless stroke rate control in the range of 1060 strokes/min via ABB frequency converter Control variant -touchscreen TFT color incl. electronic cam switchgear with tool control and tool safety, ...
Horizontal baler Dixi 80 SLD, with lift/tilt device, semi-automatic, year of manufacture 2020 Manufacturer: Dixi Type: Dixi 80 SLD Year of Make: 2020 Drive power: 11 kW, 400 V / 21 A Filling opening: 1,040 x 1,110 mm (WxL) Press force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (WxHxL) Bale weight: approx. 500-600 kg Binding: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (LxWxH) Machine weight: approx. 8,000 kg Materials: paper, cardboard, foil Note: The press is in good condition. It has been checked and tested. You can find a video on our website or YouTube channel. The operating instructions are available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subje ...
Packstation / Roller Compactor Manufacturer: Bergmann Type: PS 8100 Machine No.: 09-BE001521-05 Year of construction: 10/2005 System: Rotating Waste Compactor The packing station captures, shreds and compacts the material to be filled by means of a specially fitted steel roller. Compression ratio: 9 : 1 pmax: 100 bar Drive power: 2.2 kW, 85.1 A Dimensions: 1210 x 1605 x 2200 mm Weight : 860 kg Bale volume: 1m³
Packstation / Roller Compactor Manufacturer: Bergmann Type: PS 8100/21 Machine no.: 1286.1541.1324 Year of construction: 12/1986 System: Rotating Waste Compactor The packing station captures, shreds and compacts the material to be filled by means of a specially fitted steel roller. Compression ratio: 9 : 1 Drive power: 2.2 kW Dimensions: 1210 x 1605 x 2200 mm Weight : 780 kg Bale volume: 1m³ Machine weight: 730 kg
Packstation / Roller Compactor Manufacturer: Bergmann Type: PS 8100 Machine No.: 08-BE003665-07 Year of construction: 08/2007 System: Rotating Waste Compactor The packing station captures, shreds and compacts the material to be filled by means of a specially fitted steel roller. Compression ratio: 9 : 1 Drive power: 2.2 kW Dimensions: 1,210 x 1,605 x 2,200 mm Weight : 860 kg Bale volume: 1m³
automatic baler Manufacturer: UNOTECH Type: UPAMAT 120 V5/H3 Operating hours: approx. 5,400 hours Year of Make: 2021 Technical data: Length of the channel baler: approx. 13,500 mm Width of the channel baler: approx. 2,400 mm Height of the channel baler: approx. 3,400 mm Weight of the channel baler: approx. 45,000 kg Filling opening: 1,020 x 2,000 mm Channel cross-section height x width: 750 x 1,100 mm Bale weight depending on length and material 600 - 900 kg Press force: 1,200 kN at 315 bar Electrical data: Operating voltage: 400 V/3 PE Frequency: 50 Hz Voltage tolerance: +/- max. 5% Degree of protection: IP 55 Control: Siemens S7 1.500 with two 410 litre axial piston pumps, each with 45 kW drive power, for an increase in output to approx. 410 m³/h. Pumps on pump plate completely piped and installed in the oil tank. O ...
automatic baler Manufacturer: UNOTECH Type: UPAMAT 120 H5 / RB Operating hours: approx. 2,800 hours Year of Make: 2017 Machine No.: U24170 Technical data: Press force plunger: 1,000 kN at 260 bar Cutting force: 1,200 kN at 315 bar Specific pressing force: 124 N/cm² Main pump drive 1 x 55 kW Power Steering Pump: 1 x 11 kW Pump capacity: 410 Ltr./min. Oil tank capacity: 1,300 ltr Volume output under operating conditions: max. 280 m³/h Weight performance depending on the bulk density at 20 to 30 kg/m³ approx. 8.4 t/h for 30 to 50 kg/m³ approx. 13.0 t/h at 60 kg/m³ approx. 16.0 t/h at 100 kg/m³ approx. 23.0 t/h Binding: 5-fold horizontal for plastic cable Filling opening: 1,020 x 2,000 mm Channel cross-section height x width: 1,100 x 1,100 mm Bale weight depending on length and material 800 - 1,000 kg Press bottom planked wi ...
New, unused automatic baler Manufacturer: PAAL Type: KONTI X 700 J Including automatic 4-fold cross binding Hours: 0 Year of construction 2026 Technical data: Press force: 1940 kN/ 198 t at 300 bar Specific pressing force: 160 N/cm² Bale size: 1,100 x 1,100 x length in mm Filling opening: 2,000 x 1,020 mm Drive power: 3 x 55 kW (axial piston pumps) Throughput capacity (according to manufacturer's specifications): approx. 675 m³/h Capacity at 35 kg/m³: 23.6 t/h Capacity at 60 kg/m³: 38.7 t/h Capacity at 100 kg/m³: 57.5 t/h Binding: 5-fold vertical + 4-fold horizontal Machine weight: up to approx. 59 t including new press feed belt Manufacturer: PAAL Year of construction 2026 Type KEF 1900 incl. gooseneck Conveyor width: 1,900 mm Feed length: approx. 6,250 mm Subject to errors in the technical data.
Packstation / Roller Compactor Manufacturer: Bergmann Type: PS 8100-? Machine No.: unknown Year of manufacture: unknown System: Rotating Waste Compactor The packing station captures, tears and compacts the product to be filled by means of a specially equipped steel roller. Compression ratio: 9 : 1 Drive power: 2.2 kW Dimensions: 1,210 x 1,605 x 2,200 mm Bale volume: 1m³ Weight: approx. 750 kg
automatic baler Manufacturer: PAAL Type: KONTI 125 D / SO Year of Make: 2002 Technical data: Press force: 60 t at 300 bar Specific pressing force: 7.79 kg/cm² Channel format: 700 x 1,100 mm Bale weight: 425 - 580 kg, depending on material and bale length Filling opening: 1,400 x 1,020 mm Machine weight: approx. 20 t Drive power: 30 kW Throughput: 150 m³/h Pressing capacity: approx. 5.00 t/h at department store (35 kg/m³ bulk density) approx. 8.75 t/h for mixed paper (60 kg/m³ bulk density) approx. 12.5 t/h for collected goods (100 kg/m³ bulk density) Wirbulator, which can be swivelled in by hand, has been retrofitted. Optionally with: Press feed belt Manufacturer: PAAL Type KEM 1400 Year of Make: 2002 Technical data: Conveyor width: approx. 1,400 mm Wheelbase: approx. 14,250 mm Feed length: approx. ...
Fully automatic baler Manufacturer: BOLLEGRAAF Type: HBC 80 Year of Make: 2000 Operating hours at the end of Feb. 2026: approx. 41,500 hours Technical data: Press force: 78 t Specific pressing force: 4.58 kg/cm² Drive power: 1 x 45.0 kW Throughput under operating conditions: with a bulk density of 20 kg/m³ approx. 9.0 t/h with a bulk density of 50 kg/m³ approx. 18.5 t/h at 100 kg/m³ bulk density approx. 30 t/h Filling opening: 1,500 x 1,100 mm Bale size: 720 x 1,100 mm (H x W) Binding: 4-fold vertical Machine weight: approx. 24 t Bale weights: up to approx. 550 - 800 kg including: - Wire unwinding devices - Feed belt with approx. 6 m feed length - Conveyor belt hopper - Walking area with ladder on the funnel according to photos
pressure: 25 t throat: 200 mm stroke: 4 - 80 mm table surface area: 595 x 410 mm ram adjustment: 70 mm no. of strokes: 150 Hub/min table adjustable in height: 240 mm total power requirement: 1,1 kW weight of the machine ca.: 1,45 t dimensions of machine L x W x H: 1,30 x 0,80 x 2,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Briquetting press 1000 kg/h approx. 55 kW Diameter 75 mm
automatic baler Manufacturer: HSM Type: VK 8818 R-FU Year of construction 2021 Operating hours: approx. 81 Technical data: Press force: 1000 kN Specific pressing pressure: approx. 120 N/cm² Channel format: 1,100 x 750 mm (W x H) Binding: 5-fold horizontal Wire push-through: seen in the direction of pressing on the left side Filling opening: 1,800 x 990 mm Drive power: 2 x 45 kW Control: S7-300 Theoretical throughput: - At 20 kg/m³ bulk density: approx. 12.86 t/h - At 50 kg/m³ bulk density: approx. 32.15 t/h Practical throughput: approx. 50 % of the previously mentioned theoretical performance Cycle time: approx. 8.3 sec. Bale dimensions: approx. 750 x 1,100 x length (600-1,200) mm Bale weights: approx. 500 - 750 kg Machine weight: up to approx. 30,000 kg Optionally with: Press feed belt Manufacturer: ? from ...
Offer 22564 Specifications: - Printing capacity 150 t - Working width 2600 mm - Passage between uprights 2100 mm - Table width 180 mm - Projection 250 mm - Installation height 325 mm - Drive 400 V / 7.5 kW - Space requirement approx. W 3000 x H 2400 x D 1600 mm - Weight approx. 7000 kg - With: - Two-hand control panel with foot switch
used baler Manufacturer: PAAL Type: DOKON 500 with twine tying Year of construction: May 2014 Technical data: Binding: 5-fold horizontal Press weight up to: approx. 30 t Press force: 122 t Specific pressing force: 9.90 kg/cm² Filling opening: approx. 2,000 x 1,020 mm Channel cross-section: 1,100 x 1,100 mm Drive power: 1 x 45 kW Throughput: 250 m³/h Pressing services: at 100 kg/m³ bulk density: approx. 25 t/h at 150 kg/m³ bulk density: approx. 30 t/h at 200 kg/m³ bulk density: approx. 35 t/h Binding: 5-fold horizontal Transport dimensions: Length: 13,300 mm Width: 2,600 mm Height: 3,300 mm without yarn unwinding devices, without control cabinet, without binding twine, without feed belt, without a personal protection system, without conveyor belt hopper and without walking surface with vertical la ...
pressure: 100 t chamfer lenght: 2050 mm distance between columns: 1550 mm throat: 250 mm stroke: 200 mm adjustment of press crosshead: 200 mm stroke speed - idle stroke downwards: 105 mm/sec stroke speed - idle stroke upwards: 180 mm/sec stroke speed - under load: 9,5 mm/sec table width: 200 mm table height over floor: 900 mm dayligth: 280 - 480 mm back stop - adjustable: 3 - 729 mm control: CYBELEC SYNCHRO control: CNC 7400 PS total power requirement: 7,5 kW weight of the machine ca.: 10 t dimensions of machine L x W x H: 3,70 x 2,45 x 2,80 m Accessories: programmable back gauge, table extensions, various upper and lower dies segments The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 63 t throat: 320 mm stroke: 8-100 mm no. of strokes: 120 Hub/min ram - range of adjustment: 63 mm table surface area: 730x600 mm ram surface: 540x360 mm table height: 850 mm tool hole in ram: Ø40 mm weight of the machine ca.: 5,5 t dimensions of the machine ca.: BxTxH 2000x2000x3000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
For sale is a TOX Pressotechnik press of type MBG 004.124. The machine has a pressing force of 40 kN, equivalent to about 4 tons, and is suitable for industrial press-fitting, joining, assembly, riveting, embossing and caulking work. Particularly noteworthy is the existing examination: The machine is still tested until 04/2027. Technical data Manufacturer: TOX Pressotechnik Type: MBG 004.124 Product Type: Press/Press-Fit Machine/Joining Machine Press force: 40 kN Maximum air pressure: 5 bar Total stroke: 200 mm Power stroke: 80 mm Year of Make: 2001 Machine serial number: 210192.1 Machine number / electrics: 210193.1 Nominal voltage: 230 V AC Control voltage: 24 V DC Frequency: 50 Hz Power: 0.2 kW Rated current: 0.5 A Fuse: 16 A Degree of protection: IP65 Standard: DIN EN 60204 Circuit diagram: STE 325-26 Country of manufacture: Germany Exam valid until: 04 ...
pressure: 40 t throat: 195 mm stroke: 8-78 mm no. of strokes: 76-190 Hub/min ram - range of adjustment: 60 mm table surface area: 650x380 mm table height: 840 mm hole in the table: Ø 110 mm ram surface: 250x350 mm tool hole in ram: Ø 40 mm total power requirement: 3 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: BxTxH 1450x1220x2110 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 55 t throat: 200 mm stroke: 10-80 mm ram - range of adjustment: 60 mm no. of strokes: 120 Hub/min table surface area: 600x450 mm ram surface: 290x230 mm table height: 850 mm tool hole in ram: Ø 40 mm weight of the machine ca.: 3,5 t dimensions of the machine ca.: BxTxH 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Capacity 250 kg/h Throughput 2.3 m3 Briquette mould 8 square Antireb 11 kw Weight 1200 mg
HEBÖ WZT24 24T horizontal bending machine was manufactured in 2014 in Germany by hebö Maschinenfabrik GmbH. The machine is practically unused and fully functional. It was started up only for the purpose of testing, during which single workpieces were produced. The HEBÖ WZT24 is a efficent horizontal bending machine designed for the precise bending, forming and straightening of workpieces made from materials suitable for cold forming. All these processes are performed by a horizontal working unit with a maximum press force of 24 tonnes. The machine is equipped with a 950 x 600 mm work table and a tool cabinet, which provides convenient storage for the necessary tools. The machine operator has at his disposal an intuitive PLC controller and an ergonomic foot control. All this is complemented by a rigid design that ensures proper stability during intensive machining operations. The HE ...
maximum number of results exceeded
please refine your search
