press used for sale

Pressure test book not available - sold as a free-fall silo Silo 34 m³ volume, payload 50 to, dead weight approx. 4000 kg Diameter 2500 mm, height approx. 9000 mm Outlet with silo butterfly valve NW 250 Inspection Cover NW 500 Blow-in line, vent line

Specifications Maximum pressure: 56 tons Year of Make: 2016 Press force: 3.8 kg/cm² Number of bindings: 5 Channel cross-section: 1100 × 750 × 600÷1200 mm Dimensions of the tailgate: 990 × 1250 mm Bale weight: 250 - 500 kg Weight: approx. 15.5 - 17.5 t Power connection: 3 × 400 V250 - 500 kg Bale tying: automatic Drive power of the main motor 75 kW Nominal current of the main motor 125.22 A Pump capacity 438 l/min Oil cooler 4kW Oil heating 1 kW Theoretical throughput 535 m3/hour Theoretical flow rate to density 20 kg/m - 10.70 tons/hour Theoretical throughput to density 50 kg/m - 26.75 tons/hour Machine in operational condition, in continuous operation. Courtesy, please contact the seller directly regarding this machine tel. 508 115 007

Nominal force, tf 1000 The slider does not reach BDC, mm 12.5 Slider stroke, mm 600 Frequency of continuous strokes, min-1 12...18 Highest frequency of single strokes, min-1 9...13 Closed height, mm 1500 Adjustment of closed height, mm 400 Slider dimensions, mm from left to right 4500 front to back 2500 Dimensions of the die plate, mm from left to right 4500 front to back 2500 Main drive electric motor power, kW 200 Overall dimensions, mm from left to right 6745 front to back 5400 height above floor level 9360 Weight kg 320000

Bipel Tiltmaster 120 Press Closing force 120ton Platen size 458 x 458 Opening force 180KN Ram stroke 100mm With vacuum Max. Daylight between platens 200mm Overall dims: 1195mm wide x 1000mm deep x 2000mm high Weight: 3000kgs

SPECIFICATIONS: Dimensions of the work table mm: 2500 x 1300 Number of pistons: 4 Diameter Ø 90 mm Piston stroke mm: 470 Complete with intermediate plate Operation with water

Semi-automatic dough dividing and weaving machine, Bun press Model: Divobun 3-30 NEW sophisticated technology ... already proven many times over! Stainless steel knife with easy cleaning position! with 3 knitting plates Sub-range 25 to 80 grams/piece Pitch 30 pieces Machine mobile DGUV V3 tested Connection 400V, 0.75 kW, 16A-CEE plug Dimensions: 600 x 700 x 1520/2200 mm, WxDxH New machine with 2 years warranty + service package More dough dividers in stock!

Semi-automatic dough dividing and weaving machine, Bun press Model: Divobun 4-14 NEW sophisticated technology ... already proven many times over! Stainless steel knife with easy cleaning position! with 3 knitting plates Sub-range 130 to 400 grams/piece Pitch 14 parts Machine mobile DGUV V3 tested Connection 400V, 0.75 kW, 16A-CEE plug Dimensions: 600 x 700 x 1520/2200 mm, WxDxH New machine with 2 years warranty + service package Many more dough dividers in stock!

Semi-automatic dough dividing and weaving machine, Bun press Model: Divobun 4-30 NEW sophisticated technology ... already proven many times over! Stainless steel knife with easy cleaning position! with 3 knitting plates Subrange 40 to 120 grams/piece Pitch 30 pieces Machine mobile DGUV V3 tested Connection 400V, 0.75 kW, 16A-CEE plug Dimensions: 600 x 700 x 1520/2200 mm, WxDxH New machine with 2 years warranty + service package Option: other knitting plates Maintenance contract Many more TOP roll presses in stock!

The press is function with two adaptor Pressing force max. kN 1800 Pull-off force max. kN 1500 Counterholding force kN 1200 in pressing position Upper punch stroke mm 220 Filling height max. mm 180 Pull-off travel max.mm 90 Pressing path max. mm 90 Distance of upper pressure max. mm 18 Drive motor kW 30 Stroke rate (infinitely adjustable) min-1 6-24 Pre-suspension. Distance max. mm 62 (surcharge). Force max. kN 5.3 Total height mm 4700 Total width mm 2360 without electricity Total depth mm 2700 Hydraulic unit Total weight, net kg 17000

Machine: 3-level deck press gluing star Brand: Altec Type: EB3P-6/18 B (Vario) Year of manufacture: 2000 CE Specifications: Press length: 3,740 mm Pressing units per floor: 3 places Insertion depth: 1,080 mm Press thickness: up to 80 mm Minimum press length: 400 mm Pneumatic pressing pressure: 25,000 N to 35,000 N at 10 bar Pneumatic hold-down devices: instead of mechanical (was an optional accessory) 18 pieces Pressure beams per working level: 6 x 600 mm Useful stroke: 50 or 80 mm Star rotatable: with hand crank Height: 1,900 mm Depth: 1,680 mm Length: 4,320 mm Weight: 1,700 kg

Used Hermetic Press - Plate Press for Concrete Slabs, Terrazzo Slabs, etc. Manufacturer: OCEM Type: OPA850 Year of Make: 1994 with washout system for exposed concrete, flat storage and steel pallets Used hermetic press - slab press for concrete slabs, terrazzo slabs, etc. Manufacturer: OCEM Type: OPA850 Year of construction: 1994 with washing system for exposed aggregate concrete, flat cycle and steel pallets

Key data: 250 t

Catalog No. : 7693 Type: CD 250 Producer: Mecamaq Made in: 2022 Characteristic: Pressing force: 250 t Maximum stroke: 250 mm Machine weight: 3200 kg

for sale - PROFI Hydraulic Workshop Press HF2 30 tons Clear width 560 mm Hand and foot operation Piston stroke 160 mm Cylinder diameter 115 mm Weight approx. 165 kg further models and inquiries to FSA Maschinen AG

WEINGARTEN DE 200-20 press built in 1975 in Germany is used for precision workpiece machining. The rigid construction combined with a high press force of 200 tonnes make the machine the perfect solution for mass production of various types of parts. The process of precision sheet metal pressing can be fully automated when the WEINGARTEN press is retrofitted with a sheet metal feeder. Technical specifications of the WEINGARTEN DE200-20 200 t press - press force: 200 t - maximum slider stroke: 200 mm - minimum slider stroke: 15 mm - maximum number of slider strokes: 60/min - minimum number of slider strokes: 20/min - slider adjustment: 110 mm

20,000 LITERS STORAGE TANK/ PRESSURE TANK/ BEER TANK GRESSER CAT NO: 24-0576EUBA MJ UNI KAR Link to product: https://eurolux.de/product/24-0576euba-20000-liter-lagertank-drucktank -biertank-gresser Specifications Surface outside 2B=IIIC ground Manufacturer: Gresser Surface inside 2B=IIIC ground Material V2A (AISI 304) 1.4301 Volume 20000 L Total height 4600 mm Cylinder height 3000 mm Diameter 2700 mm Operating pressure 0.99 bar Operating temperature range 20 C Vertical design Year of manufacture 1991 Number of feet 4 Last Use Food Technical Documentation No Topsoil: Clapper bottom 2 crane eyes Threaded Sockets Tank cylinder: Manhole oval 440 x 430 mm Tasting tap Ladder hooks CIP line DN 40 pulled down with airlocked casing Subsoil: Clapper bottom forward-drawn residual drain pipe with disc valve DN 50 4 fixed feet

HOT PRESS model OMC PL 90 , with diathermic oil heating second hand machine machine worked very very little excellent working conditions , like new CE compliant machine diathermic oil heating via built-in electric boiler heating power KW 9 / 18 for wood, veneer, composite materials, furniture, panels etc platen useful size mm.3000 x 1300 n.06 cylinders diam.mm.85 max. thrust Ton.90 opening mm.400 hydraulic pump motor power Hp 3 n.4 racks for table lifting guide max. thrust 2.5 kg/cm2 total installed power 21 kW volt. 380/50 net weight kgs. 4500

MILLUTENSIL spotting press BV30E-RG New machine in stock for sale..

Double pressing/folding/product pressing single or shingle flow Condition: overhauled, serviced, fully functional, ready for use Min. format: spine 180 x width 140 mm, number of pages (45g/m2) tabloid 8, two-fold/broadsheet 4 Format max. spine 450 x width 340 mm, number of pages (45g/m2) tabloid 128, two-fold/broadsheet 64 Mechanical speed max.: 10000 revs/h

• Tablet diam./diagonal max. 60 mm with single mould • Output max. 1,800 tablets/h with single tool • Infinitely variable speed • Filling height max. 40 mm • Pressing pressure max. 80 KN • Without filling shoe, die table, discharge chute and tableting tools • Contactor control, electrics new in 2009 • Sold as a spare parts repository in present condition

HOT PRESS MODEL PL 90s 3000x1300 mm PS VBO TECHNICAL CHARACTERISTICS Platens dimensions 3000x1300 mm Stroke 400 mm Type of stroke Upstroke design (from bottom to top) Type of platen Assembled platens with coil and aluminum covering Total thrust 90 ton on 80% of the surface Pressing Cylinders N° 6 cylinders ø70 mm Specific Pressure 2.05 kg/cm2 on 100% of the surface 2.56 kg/cm2 on 80% of the surface Loading and Unloading Side3000 mm side Type of Heating system Oil boiler ? maximum temperature = 120°C Heating system specificationsElectric boiler 18 kW Opening Automatic by timer Control Board Standard Power supply 400V, 50Hz, 3ph Security device Safety rope around the press Red emergency Button Two Hand control Norma ...

Used High Quality Bystronic pressbrake 6-axis for a sale.

Inv. Num. : 7796 Type: HSA 200 T Producer: Hidroliksan Created: 2022 Parameters: Operating hours: 1600 h Compressive force: 200 t Maximum stroke: 450 mm Top table length: 1600 mm Top table width: 1400 mm Speed (high): 250 mm/s Speed (down): 160 mm/s Working speed: 5-18 mm/s Machine height: 5000 mm Machine length: 3650 mm Machine width: 3400 mm Machine weight: 18,000 kg

Capacity: 1.100 Ltr. Operating pressure: 5.0 bar, with technical documentation Year of Make: 1987 Manuf.: Binder, Crailsheim Material: stainless steel, 1.4301 Design: Cylindrical sthd, on 3 feet, outlet with disc valve DN 32, pulled down cleaning line with spray head and pressure fitting, sample tap, disc valves DN 32, manhole cover last use: beer Height approx. 2,280 mm (with cleaning line) Diameter: approx. 900 mm Prices plus VAT. VAT, from our warehouse, free truck loading!

26 Mint Unused Hydraulic Cylinder Single Wheel with Tension Spring Manufacturer: Matra Frankfurt Article number 4641.00000.5700166Z Overall length retracted 345 mm Overall length extended 470 mm Stroke 150 mm Piston rod 63 mm Piston 80 mm Drauck 350 bar Input errors, errors and prior sale reserved.

Dough dividing and rounding machine Roll Press Record Semi-automatic 36-piece Parting head NEWLY revised Stainless Steel Knife NEW Dough insert up to 2100g, pieces from 20 to 70 g Output approx. 3600 pieces/hour with 3 new knitting plates E-system new DGUV V3 tested Connection 400V, 1 kW, 16A-CEE plug Dimensions: 520 x 500 x 1200 mm, WxDxH Used machine overhauled with 6 months warranty + spare parts service Option: Cast Plate Stainless steel platform Maintenance contract Service Package E-Box Many more TOP dough dividers in stock!

Technical data: Capacity, ton 1000 Ram stroke, mm 400 Max. ram strokes per min. 20 Shut height,mm 1000 Ram adjustment, mm 320 Table size, mm 3150 x 1800 Ram size (front-to-back), mm 1700 Column gap size, mm 1500 x 1900 Bolster plate thickness, mm 250 Ram travel to its extreme position where it develops nominal capacity, mm 12 Pneumatic cushion capacity, ton 200 Pneumatic cushion stroke, mm 200 Upper knock-out capacity, ton 50 Main motor power, kW 132 Press dimensions, mm 5150 x 4700 x 7830 Press weight, kg 200000

Capacity: 3.100 Ltr. Operating pressure: 4.5 bar, with test book Year of Make: 1976 Manuf.: Wabag Material: Stainless Steel, 1.4571, V4A Design: Cylindrical sthd, on 3 feet, spout with ball valve DN 25, lateral weld-on nozzle DN 65, various connections inch threads, manhole cover, slight adhesions inside and outside last use: water Height approx. 3,300 mm (with cleaning line) Diameter: approx. 1,150 mm

Nominal force: 500 ton Slide stroke: 250 mm Slide strokes per minute: 25 Table dimensions: 1400 x 2500 mm Max distance between table and slide in its lower position at the upper position of adjustment: 750 mm Size of distance adjustment between table and slide: 250 mm Press dimensions (Length x Width x Height): 4130 x 2945 x 7200 mm Press weight: 69000 kg

BRUDERER BSTA 25 Precision high speed punching press. Nominal capacity: 250 kN; 25 tons. Min./Max. number of strokes: 100/1500. Max width of strip: 200 mm. Adjustable stroke: 13, 16, 19, 25, 32, 38 mm. Fitted with roll feeder BBV 202/120 on left hand side. Feed length variable up to 120 [mm] max. Optional: Sound insulating cabin. Condition: good working and visual order. Oil pump. Oil cooler. Execution: 4 supports. Front and rear safety guards. Fitted on rubber feet. Table dimensions: 530 x 530 mm. Passage between the supports: Longitudinal 540 mm; Lateral 200 mm. Slide/Ram adjustment 51 mm. Documentation in German or English language included. Press weight cca. 4800 kg. Press dimensions: 2055 x 1355 x H26200 mm.

Maximum force of slide: T 250 Stroke of slide: mm 400 Stroke rate per min 12 Adjustability of slide: mm 120 Bed area (W x D): mm 2500x1400 Main motor power: kW 32 Max depth of extraction 100mm pressing force during the maximum depth of extraction T 100 Force holding extract unit: T 50 Height above ground: mm 5000 Weight: 66 ton

Nominal force, kN 2500 Slider stroke, mm 400 Number stroke per minute 25 adjustment mm 260 Distance between table and slider, mm 750 Main motor power kW 47 Table size width / length mm 1250/2500 Dimensions of the machine Length Width Height (mm) 4555_2900_5855 Weight kg 50100

ATOM Beam Cutting Press Model S325 T25 Capacity load 2500kg Working width 1600mm Working depth 600mm Max. pressure 25T Daylight between platens 400mm Max. stroke 350mm Motor 380/415V KW4 50Hz Year 1995 CE marked With manual

REP Press Model V58Y10W Injection volume 1000ccm Platen size: 500 x 630 mm Year 2006 Power: 2550 kN Operating hours: 14570 Moveable traverse Fix traverse Sliding Table

Workpiece length 2200 mm Workpiece height 1400 mm Vertical pistons Ø70mm Motor power 1.5 kW Made in Denmark Transport dimensions 2900x2500x900 mm Weight 500 kg Price 1250 Eur (EXW Jonava, Lithuania)

Presses Manufactured by JR Dare Model PR100X2 Tonnage can be set between 20 and 100ton Platen size 16” (400mm) x 16” (400mm) Daylight 400mm. Pressure can be changed Bumps cycles platen temperature all programmable Mitsubishi controls 1x pump unit per pair of Presses Dims: 2.4m long x 1m deep x 2m high

Control Thrust... 80t Bending length ... 2620mm controlled axes ... 4 Plunger stroke... 200mm Machine weight ... 5750kg The machine is in good condition, possible to test under power.

Capacity, ton 630 Stroke path till its position where it develops nominal capacity, mm 16 Slider stroke, mm 320 Slider strokes, spm 20 Max. distance between table and slider, mm 800 Distance adjustment between table and slider, mm 180 Table size, mm 1250 x 1250 Slider dimensions, mm 1000 x 1000 Opening in the table, mm 800 x 800 Thickness of bolster, mm 180 Cushion stroke, mm 130 Main motor power, kW 58 Machine dimensions, mm 3280 x 3470 x 6190 Machine weight, kg 55500

Capacity: 3.404 Ltr. Operating pressure: 2.0 bar, with test book Year of Make: 1986 Manuf.: Gresser Material: stainless steel, 1.4301 Type: Cylindrical sthd, on 4 feet, outlet with disc valve DN 40, pulled down cleaning line with fitting, pedestal hose, manhole cover last use: beer Height approx. 2,500 mm (with cleaning line) Diameter: approx. 1,505 mm Please send inquiries to: infohochholzer

• Ideal for the fast packaging of small quantities of e.g. tablets • Blisters are glued in seconds in just a few steps • The contact pressure can be finely adjusted using a scale • Format changes are completed within a few minutes • The items are not thermally stressed • For format plates (w x d) 480 x 360 mm • With 1 format plate • Purely manual operation, no electrics/pneumatics • Without underbench

• Ideal for the fast packaging of small quantities of e.g. tablets • Blisters are glued in seconds in just a few steps • The contact pressure can be finely adjusted via a scale • Format changes are completed within a few minutes • The items are not thermally stressed • For format plates (w x d) 390 x 430 mm • With 11 format plates for different blister arrangements • Purely manual operation, no electrics/pneumatics • Without underbench

Key data: 22 mm, 900 , 850

Electric Press Brake C9s CoastOne - Made in Finland Pressing force: 22T Bending length: 900mm Spindles: 1x22T Control: TC15-2D Graphics Back gauge: 2 axis controlled X-R axes Bending tool holder: Type A / R1 / ES Style / AMADA Promecam 1x set of bending tools incl. 36 months warranty after installation Delivery excl.; at call Viewing under power possible at any time by appointment!

COMAP packaging press mod. SC-10 - CE compliant - used - Parcel dimensions H 750 mm W 1000 mm D 700 mm - Strength Kgf 1000 - Loading width: 1000 mm. - Loading depth: 700 mm. - Loading height : 1390 mm. - Complete with manual - Year 1996

Millutensil spotting press BV25/PM - Output force adjustable (with max. pressure): 100 - 800 kgf - Ejector stroke max.: 120 mm - Hydraulic pressure adjustable from 5 - 100 bar - Width: 150 cm - Depth: 150 cm - Height: 200 cm - With operating instructions Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

various book presses, in good condition, immediately available

2 x Schmidt Eccentric Press ZHS-4/36 - 600 tons of pressing force Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

TRUMPF Trumabend 125/3.1-DA24 hydraulic Press brake YOM 1994 Pressure 125 t chamfer lenght 3050 mm distance between columns 2550 mm total power requirement 15 kW column arm 350 mm ajustment speed 130 mm/sec work speed 1-10 m/min return speed 100 mm/sec back stop - adjustable 1000 mm Stroke 200 mm dayligth 400 mm Pressure power 280 bar dimensions of the machine ca. 3,6 x 2,3 x 2,8 m weight of the machine ca. 9,5 t Control unit CNC Maker of control unit DA24 4-Axis Control (y1,y2,x,r)

COLLY 1410S Press brake Bedknife Multi V-shaped clamp Capacity 140 t x 4050 mm Max. operating pressure 220 Passage between uprights 3100 mm Max stroke 7 - 250 mm Max distance between table and ram 500 mm Depth of throat 300 mm Table width 190 mm Locking speed 40 mm/sec Working speed 7 mm/sec Returning speed 50 mm/sec Dimensions 4250x1800x2995mm

Product number: 2995 Type: HP-300 Belt width: 300 mm Power: 3 x 400V, 50Hz, 16A Dimensions: 1650 x 700 x 1600 mm Adjustable height between belts

automatic baler Manufacturer: PAAL Type: KONTI 125 Year of Make: 1988 Operating hours: approx. 23660 specifications: Press force: 40 t Specific pressing force: 5.7 kg/cm² Channel format: 700 x 1,000 mm Binding: 3-fold vertical Bale weight: 375 - 450 kg, depending on material and bale length Filling opening: 1,400 x 920 mm Machine weight: approx. 10 t Drive power: 22 kW Throughput: approx. 115 m³/h Pressing capacity: approx. 4.00 t/h at department store (35 kg/m³ bulk weight) approx. 6.75 t/h for mixed paper (60 kg/m³ bulk weight) approx. 10.0 t/h for collected goods (100 kg/m³ bulk weight)

Type of packing machine Height 1900 mm Width 1400 mm Length 2150 mm Power supply: 400V 50Hz 3N Total power 7.5 kW Main Material: Galvanized Steel Hunkeler Systeme AG Channel Press, Model:, HSM AK 12-600, Pressure: 16 tons, Power supply 380 V, 50 Hz, 7.5 kW, Overall dimensions: 2150 mm x 1400 mm x 1900 mm, 2900 mm x 1300 mm x 1850 mm, 1200 mm x 900 mm x 1200 mm 1600 mm x 400 mm x 350 mm.