press used for sale

Press screw REG-MAC for drying foils and fibres, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw

Specifications Maximum pressure: 60 tons Press force: 156 t/m² Bale size: 1100 x 1100 x 700 mm Bale weight: 400 kg Power supply: 400V/ 13kW Year of construction: 2014 Dimensions of the tailgate: 2815 x 1085 x 2250 mm Machine weight: 7.5 t The machine is functional

Pneumatic clip breaker for aluminum glazing beads and glass clips Working pressure 0.8mpa Air consumption 1.6l/hub

Includes 1 set of tools

Working capacity 103 mkg at speed 180 1/min, max. stroke 60 mm, stroke adjustment 6-60 mm

Equipped with 10 crimp sets; unused

Gluing Press / Press Rotor / Gluing Stars For the production of solid wood panels or similar Manufacturer: ACMA Levels: 4 Hydraulic Cylinders: 6 per level Hold-down: 2 frames per level Working area per level approx. 2900 x 1150 mm

SECOND HAND BENDING PRESS - plates dimensions mm. 3100X800 - opening mm. 800 - 8 cyl. diam. 80 mm.

Hydraulic pressure 700 bar with hand pump

Unused machine

Hydraulic Hose Press; Crimping range: 15-63mm, Max aperture: 75mm, Voltage: 380V, Wattage: 3000W, Pressure: 53.5 Mpa Packing size: 780x540x1350 Weight incl. packaging: 280 kg Unused.

Equipped with new control and laser protection from PILZ; including 1 set of tools with 2 V die sizes

V6 30 degree T mold set; length approx. 3.1 meters

Unused, crimping range 15-63mm, maximum aperture 75mm, 53.5 mpa, force 500 T, 3000W

Specifications Maximum pressure: 65 tons Pressing force: 84 tons/m² Duct cross-section: 1000 x 750 mm Bale weight: do 550 kg Power supply: 400 V/ 45 kW Year of construction: 2011 Number of ties: 4 vertical Dimensions of the tailgate: 1400 x 920 mm Weight: approx. 13 tones Bale tying: automatic

Specifications Maximum pressure: 50 tons Press force: 7.14 kg/cm² Duct cross-section: 1000 x 700 mm Bale weight: do 500 kg Power supply: 400 V/ 30 kW Number of ties: 3 horizontal Dimensions of the tailgate: 1250 x 950 mm Weight: about 10 tons Bale tying: automatic Open hopper allows filling with the conveyor belt. Knife on the press plate and on the frame of the press to cut off the excess material. Automatic regulation of the light from the duct. Automatic binding with wire Choice of the length of the finished bale Press plate stably guided on the large rollers Large flaps of the press chamber for easy maintenance

Key data: 200 mm

used press brake Trumpf TruBend V200 + BendMaster 60 Year of construction 2004 Pressing force max: 2000kN Stroke max: 365 mm Operating pressure max:340 bar 1 piece B0401A0009 = BendMaster 60 1 piece B0106A0073 = TRB V200-6A 1 piece of protective housing incl. lighting 1 piece of BendMaster roadway 14 meters in 2 meter segments 1 piece of system control system trump

Length approx. 1800 mm; WILA NS Recording

"Max. test pressure: 7 tons Max. distance from lower bearing: 2000 mm Max. distance from upper bearing: 600 mm Max. sample width: 250 mm Max. sample height: 200 mm" on pallet

Unused machine, incomplete

Volume 350 L

Equipped with 10 crimp sets; unused

Hydraulic Hose Press; Crimping range: 15-63mm, Max aperture: 75mm, Voltage: 380V, Wattage: 3000W, Pressure: 53.5 Mpa Packing size: 780x540x1350 Weight incl. packaging: 280 kg Unused.

Press screw REG-MAC for drying foils and fibres, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw

On base and with vice

Incl various press tools and 3x foot control pneumatic connections aluminum profile molds tool metal tray. For aluminium window and door profiles corner connections

Pressure plate stacker Grafoteam PST 26 C; arm length 650mm; suitable for Heidelberg Suprasetter A52-74; optionally with stop interface for Heidelberg Suprasetter A52-74. Plate stacker Grafoteam PST 26 C; arm lenght 650mm; used for Heidelberg Suprasetter A52-74; for option with stop-interface for Heidelberg Suprasetter A52-74.

We offer directly on behalf of the owner : Bending press, second-hand Make : Graebener Maschinentechnik (Gräbener) Type : GRNM Year of construction : 2005 Flexural force max.: 16.000 kN ( 1.600 t ) Tool length : 1,600 mm Data at 520 N/mm2 Pipe diameter max.: 1,524 mm Tube diameter min.: 457 mm Sheet thickness max.: 40 mm Max. pipe length: 13.2 m Pipe length min.: 6m Pipe weight max.: 25 t Total power requirement approx.: 245 kW / 400 V / 50 Hz Approx. space: 27 x 3 m Total weight approx.: 90t / basic machine approx. 65t Further technical data and details on request or see data sheets in photos / PDF The machine was built in 2005, worked until 2021 and was professionally dismantled and packed for transport.

Eccentric press vineyard type AR160 tons With protective shield. YOC 1971 2 rotational speeds via mechanical gearbox Switchable. Central lubrication. Low-wear steep-threaded coupling. Table dimensions : 800x1000 mm Visits : possible at any time. Total weight approx. 10.5 tons

25,000 LITRE KÖNIG & GÜNTHER STORAGE TANK / SPARKLING WINE PRESSURE TANK / PRESSURE TANK / 8 BAR, WITH AGITATOR PROPELLER, HORIZONTAL, ROUND, MADE OF STEEL https://eurolux.de/product/24-0563euba-25000-liter-konig-gunther-lager tank-sektdrucktank-drucktank-8-bar-mit-ruhrwerkspropeller-liegend-rund -aus-stahl KK UNI-RILL Specifications Cylinder wall thickness 12.3 mm Manufacturer: König & Günther Wall thickness floor 12.6 mm Surface coated on the inside, food-safe Surface painted on the outside Length 7100 mm Volume 25000 L Steel as a material Diameter 2250 mm Cylinder length 6000 mm Operating pressure 8 bar Agitator Propeller Stirrer Horizontal design Last Use Food Technical Documentation Yes Tank crown: 2 crane eyelets Flange connection 50 mm Front (horizontal tanks): Manhole oval Agitator propeller complete champagne pressure fitting wi ...

Food Tools CP-1H half sheet product press Serial: 6341 2021, crumb pressing machine is designed to press and pack crumbs inot the bottom of a half sheet pan quickly and with consistent pressure, up to 360 products per hour, 280mm diameter press

52,100 LITRE RIEGER SPARKLING WINE PRESSURE TANK / STORAGE TANK 8 BAR WITH SIDE MIXER, ROUND STANDING MADE OF V2A / SADDLE TANK https://eurolux.de/product/24-0515euba-52100-liter-rieger-sektdrucktan k-lagertank-8-bar-mit-seitlichem-ruhrwerksmixer-rund-stehend-aus-v2a-s atteltank Manufacturer: RIEGER Wall thickness cylinder 11 mm Surface inside 2B=IIIC sanded Surface marbled on the outside Volume 52100 L Material V2A (AISI 304) 1.4301 Total height 8000 mm Cylinder height 5500 mm Diameter 3250 mm Operating pressure 8 bar Working temperature 20 C Agitator Propeller Stirrer Vertical design Number of feet 5 Parts in contact with the product: Yes Last Use Food Technical Documentation Yes AS UNI-RILL 047-500 Topsoil: Klöpperboden 4 crane eyelets downward CIP line DN 50 with flange connection with pressure line DN 25 Tank cylinder: Manhole ovall 35 ...

Includes 1 set of tools; equipped with steered X axis

equipped with Delem CNC control and Wila hydraulic top clamping; Exclusive tools

Stationary high-pressure pump unit Hammelmann HDP 77 on base frame. Similar but no Kamat, Uraca, Woma. Pump Type: HDP 77 Operating pressure: 330 bar Flow rate: 59 l/min. Drive speed: 1500 rpm. Drive power: 37 kW with Siemens 1LA6223-4AA60 electric motor 45 kW with pressure regulating valve, Fzhoqck with safety valve, with oil cooling system. Dimensions LxWxH: approx. 1,450x750x1,150 mm Weight: approx. 600 kg Year of construction: 2019 Condition: In good used condition.

HYDRAULIC PUNCHING PRESS Inv. No. 13.085P1 Make SAHINLER Model HKM40 Capacity 40 Ton Punching Ø 20 in 15mm Stroke 50 mm Radius 175 mm Round cutting 30 mm Square cutting 25 mm Angle bar 80 x 80 x 8 mm Flat bar 200 x 13 mm 300 x 6 mm Blade length 356 mm Motor power 3 KW Weight 580 Kg

With foot switch, on metal base, self-made.

This WEMHÖNER Variopress Basic 1000S was manufactured in 2018. Ideal for efficient laminating processes, this machine ensures consistent performance. Consider the opportunity to buy this WEMHÖNER Variopress Basic 1000S laminating press. Contact us for more information.

Dirinler CD/PC 600 H - Eccentric Press - incl. tools & accessories - Built in 1990 Specification - Capacity: 60 t - Stroke rate: 52 rpm - Plunger adjustment: 80 mm - Table dimensions: 750 x 480 mm - Plunger area: 360 x 250 mm - Table recess: Ø 170 mm - Projection: 250 mm - Engine speed: 1400 rpm - Motor power: 4 kW - Operating voltage: 400 V - Machine dimensions WxHxD: 950 x 2500 x 1900 mm - Dimensions control cabinet WxHxD: 60 x 115 x 35 mm - Weight: approx. 4000 kg

Capacity: 80 ton Throat depth: 280 mm Ram stroke: 8 - 140 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 520 mm Table surface area : 850 x 670 mm Slide area: 550 x 400 mm Hole in table: 250 x 180 mm Number of strokes: 20 - 100 s.p.m. Required power: 7,5 kW Dimensions L x W x H: 2210 x 1510 x 2750 mm Oil volume: 50 l Die weight at the ram max.: 300 kg Weight of machine approx.: 8,3 ton

I am selling a heavy briquetting press RUF RB440. Year of construction 11/2002 Motor power 30kW Productivity Number 400 pcs. wood briquettes / hour Wood briquette RUF 150 x 60 x 40-110mm (Depends on material) Material moisture up to 15% Nominal pressure 14200 N/cm2 Oil cooler included. Dimensions 3000 x 1800 x 2000 mm Total weight 3000kg Equipment on the right - right entry box. Condition after full remont/500Mtstd warranty like new. Available soon. With full documentation and CE.