press used for sale

PY-3.5 T fly press is used for extrusion and pressing of bearings and bolts, as well as for other locksmith work. The offered manual screw press with a maximum pressing force of 3500 kg is new. Technical data of the PY-3.5 T press - maximum press force: 3500 kg - stroke: approx. 200 mm - weight of machine: approx. 100 kg

The filter press was revised and checked by our workshop in 2023. Machine name: Chamber filter press Manafacture: Passavant Type: AX1200 Year of construction: 1989 / 2023 Design: Bridge spar press Filter pressure: 15 bar Press capacity: Approx. 2200 litres Procedure: Closed Filter area: Approx. 155 m2 Plates format: 1200 x 1200 mm Number of plates: 62 Panel material: Polypropylene Plate transport: Automatic Plate package length: Approx. 4200 mm Cake thickness: 30 mm Dimensions: L 7600 x W 1600 x H 2250 mm Note: Workshop revised in 2022 Accessories: A control cabinet and a hydraulic system Condition: Used good Price: On request

Hand screw press, screw press, rotary mandrel press, mandrel press PAGUS Type: M56 stroke: 27 mm Projection: 60 mm stroke: max. 59 mm ( after removing the limiting sleeve ) distance ( table - tool holder ): 90 mm table diameter: Ø 65 mm, central bore: Ø 20 mm spindle diameter: Ø 20 mm, Tool holder: M12 x 1.75, length: 8 mm used, tested ! Dimensions ( ready for use ): 290 x 160 x 380 mm

Manufacturer: Igomak, Year: ca. 1970, Press depth mm: 500, Press length mm: 1000, Press press opening max mm: 450, Number of cylinders: 3 Stück/Durchmesser 100 ca, FREE TEXT: Heizplatte Oben/Veröängerte Tisch jede Seite 1000 mm, Year :ca. 1970

Press-fit device for ceramic pins in rotor shafts Principle: The ceramic pins are fed to a test station via a pneumatic hose by means of a vibrating conveying bowl, where the position of any single-sided bore is checked. This is done with an optical sensor. Wrongly positioned parts are conveyed through a pneumatic slide into a collection container. Pins that are correctly positioned are fed through another pneumatic hose to the separator of the press-fit tool. The actual press-fit process is also carried out pneumatically with a roller bearing guided punch. First, a manually adjustable pressure p1 is used to check that the pin is not pressed too easily into the shaft. With a pressure p2, which can also be adjusted manually, the pin is then pressed into the rotor shaft at full stop. A 5,000 N preloaded disc spring package prevents excessive force from being exerted on  ...

Manufacturer: Igomak, Type: T 450, Year: 1976, Hydraulical/pneumatical: Hydraulisch, Press depth mm: 500, Press length mm: 1000, Press press opening max mm: 450, Number of cylinders: 3 Zylinder 180 mm Durchmesser, FREE TEXT: Heizplatte oben/ 7,5 Kw Leistung, Year :1976

Drill press, drill press, pillar drill press, pillar drill press, tapping machine, tapping machine -Manufacturer: Alzmetall, column drilling machine type AB3ES -Motor: 0.9/1.3 kW -Speeds: 65 - 1750 rpm, infinitely variable -Table size: 300 x 400 mm, travel 550 mm -Spindle mount: MK3 -Spindle stroke: 165 mm - Projection: 290 mm -Columns Ø: 115 mm -Dimensions: 900/560/H1840 mm -Weight: 336 kg

Hydraulic press, two-column press, oil hydraulic press -Press force ram: 65 to -Hydraulic unit: max. 330 bar -Clamping table: 440 x 250 mm -Max. Insertion height: 295 mm -Max. Width: 300 mm -Max. Stroke: 220 mm -with safety cage -Max. Feed speed: 3 mm/sec -Retraction speed: 6 mm/sec -Dimensions: 1680/500/H2300 mm -Weight: 980 kg

Qty. 1 Second-hand extrusion press including log furnace Mfc.: SMS Built: 1986 Force: 960 MT (9.3 MN) Press jaw: Wide: 155 mm Height: 140 mm Max. inlet: 130 mm (144 mm block, 5 mm protection per side) Recipient: 149,9 mm Extras: Heatable tool cassette from Marx (installed 2016) Conversion of recipient to resistance heating (beginning of 2016) Punch press disc: 149,2 mm Broaching disc: 150 mm Billet Ø: 144 mm Length: 265 – 540 mm Log length: 3000-4800 mm Log Furnace Mfc.: Extrutec GmbH Built: Temperature: 480-520 °C Zone 1: 460-490 °C Zone 2: 440-470 °C Zone 3: 400-450 °C Table weight: Max. 1350 g/m Min. 80 g/m Electrical control cabinet Puller Exhausting system Cooling device Spare parts for furnace combustion air Spare parts head burner Spare parts oven stove bo ...

Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002 Operating hours 43,954 hours, stand March Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: As can be seen in the photos, some maintenance work needs to be carried out. The seal set of the main hydraulic cylinder must be replaced. In general, the hydraulics should be cleaned and a seal replac ...

Net pressure: 400 kN Surface pressure: 3.2 N/mm² Clamping plate dimensions: 500 x 250 mm ram plate, 500 x 550 mm table size Temperature control: No heating plates installed Number of floors: 1 floor Plate spacing: 755 mm without heating plates Number of cylinders: 1 Press piston Ø: 130 mm Press piston stroke: 400 mm Guide columns: 2 x Ø 90 mm Velocities: Rapid traverse up to 79 kN: 113 mm/s Press pass at 150 kN: 19 mm/s Press pass at 400 kN: 63 mm/s Return stroke: 300 mm/s Return stroke, delayed: 50 mm/s Table height: 700 mm at ground level from the floor Ejector: No ejectors (central bore closed by inserts in the table top Ø 90 mm) Hydraulics: Oil hydraulics with Rexroth valves, 400 l tank, 30 - 300 bar INLINE Hydraulic Axial Piston Pump, ABB Pump Motor 11 kW Safety: light barrier at the front; Safety grilles on the sides and rear Power supply: ...

New hot press, hydraulically Brand: ITALPRESSE Type XL/6 30-13 PEA Golden electric heating plate surface anodized to ensure high surface hardness and excellent corrision protection. - Electrical - heating plates: 3000 x 1300 mm - Total pressure: 120 to. - Number of hot plates: 2 pc. - Number of floors: 1 pc. - Stroke: 350 mm - Day light opening: 350 mm - All-round feeding - Number of cylinders: 6 pc. - Diameter of cylinder: 85 mm - Power consumption (hydraulic unit): 3 kW - Electric - combi - heating plates made out of two components: Aluminium - electric - heating plate Iso printing plate - Heating power 22 KW - High pressure isolation plates - Operating temperature: 70 - 90° C. - Max. Temperature: 120° C. - Supply: 400V/50 Hz - Safety accordance with CE standard Standard equipment: - Movement of the press table with rack and pinion parallel guidance at t ...

PRESS DESIGN   drive system: hydraulic   frame design: H-frame, monoblock   openings in uprights: yes   number of suspensions: 2   table cushion: yes PRESS FORCES   total force (nominal): 650 to PRESS TABLE   table surface (left-right): 3000 mm   table surface (front-back): 1800 mm SLIDE   slide force: 630 to   table surface (left-right): 3000 mm   table surface (front-back): 1800 mm   stroke: 1000 mm SLIDE (HYDR. PRESS)   approximation velocity max.: 200 mm/s   working velocity min.: 7 mm/s   working velocity max.: 15 mm/s   return velocity max.: 120 mm/s   return force: 65 to DIE CUSHION (TABLE CUSHION)   cushion force: 250 to   stroke: 400 mm   cushion plate surface (left-right): 2500 m ...

CONTROLS   PLC SIEMENS S5 95U PRESS DESIGN   drive system: hydraulic   openings in uprights: yes PRESS FORCES   total force (nominal): 350 to PRESS TABLE   table surface (left-right): 1600 mm   table surface (front-back): 1400 mm SLIDE   stroke: 1200 mm SLIDE (HYDR. PRESS)   approximation velocity max.: 250 mm/s   working velocity min.: 14 mm/s   working velocity max.: 50 mm/s TOOL ASSEMBLY DIMENSIONS   distance table - slide max.: 1250 mm   distance between columns (H-frame): 1650 mm   passline opening (free passage in side columns): 630 mm DIMENSIONS / WEIGHTS   height above floor level: 4300 mm   height under floor level: 1000 mm   total weight approx.: 24000 kg ATTACHMENTS (PRESSES)   European CE standards: yes

PRESS DESIGN   drive system: eccentric / crank   frame design: H-frame, tie rod   openings in uprights: yes   table cushion: yes   feedstock transport direction: left to right PRESS FORCES   total force (nominal): 200 to PRESS TABLE   table surface (left-right): 1780 mm   table surface (front-back): 1300 mm   opening in bed (left-right): 1445 mm   opening in bed (front-back): 260 mm SLIDE   slide force: 200 to   table surface (left-right): 1500 mm   table surface (front-back): 1100 mm   stroke: 178 mm   stroke rate (max.): 120 /min SLIDE (MECHAN. PRESS)   slide adjustment: 150 mm   stroke rate (min.): 20 /min   stroke rate (max.): 120 /min DIE CUSHION (TABLE CUSHION)   number of cushions: 11  & ...

CONTROLS   PLC SIEMENS S5 PRESS DESIGN   drive system: eccentric / crank   frame design: H-frame, monoblock   openings in uprights: yes   number of suspensions: 2   number of slide actions: 1   table cushion: yes   quick die change system: yes   feedstock transport direction: left to right PRESS FORCES   total force (nominal): 400 to   nominal work capacity: 32 kNm PRESS TABLE   table surface (left-right): 2600 mm   table surface (front-back): 990 mm   thickness of bolster plate: 200 mm   height above floor level: 800 mm   opening in bed (left-right): 2250 mm   opening in bed (front-back): 280 mm SLIDE   slide force: 400 to   table surface (left-right): 2600 mm   table surface (front-bac ...

PRESS DESIGN   drive system: eccentric / crank   openings in uprights: yes   feedstock transport direction: right to left PRESS FORCES   total force (nominal): 315 to   nominal work capacity: 45 kNm PRESS TABLE   table surface (left-right): 2250 mm   table surface (front-back): 1100 mm   thickness of bolster plate: 150 mm   height above floor level: 1000 mm SLIDE   slide force: 315 to   table surface (left-right): 2250 mm   table surface (front-back): 880 mm   stroke: 210 mm   stroke rate (max.): 80 /min SLIDE (MECHAN. PRESS)   slide adjustment: 120 mm   stroke rate (min.): 25 /min   stroke rate (max.): 80 /min   main drive power: 60 kW SLIDE EJECTOR / CUSHION   working principle: pneumatical  & ...

CONTROLS   electronic controls PRESS DESIGN   frame design: 4 column PRESS FORCES   total force (nominal): 400 to PRESS TABLE   table surface (left-right): 1200 mm   table surface (front-back): 800 mm SLIDE   slide force: 400 to   table surface (left-right): 1200 mm   table surface (front-back): 800 mm   stroke: 500 mm SLIDE (HYDR. PRESS)   approximation velocity max.: 290 mm/s   working velocity min.: 25 mm/s   return velocity max.: 290 mm/s   return force: 35 to TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 1100 mm ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 2255 mm   space requirements -front/b ...

PRESS DESIGN   drive system: hydraulic   frame design: C-frame, single sided PRESS FORCES   total force (nominal): 160 to PRESS TABLE   table surface (left-right): 1250 mm   table surface (front-back): 600 mm   thickness of bolster plate: 100 mm SLIDE   table surface (left-right): 750 mm   table surface (front-back): 450 mm   stroke: 500 mm SLIDE (HYDR. PRESS)   approximation velocity max.: 200 mm/s   return velocity max.: 250 mm/s TOOL ASSEMBLY DIMENSIONS   distance table - slide max.: 800 mm   throat (C-frame): 360 mm ELECTRICAL SPECIFICATIONS   total power consumption: 20.5 kW   mains voltage: 380 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 1250 mm   space requirements ...

PRESS DESIGN   drive system: eccentric / crank PRESS FORCES   total force (nominal): 30 to PRESS TABLE   table surface (left-right): 480 mm   table surface (front-back): 428 mm SLIDE (MECHAN. PRESS)   slide adjustment: 40 mm   stroke adjustment: yes   stroke min.: 8 mm   stroke max.: 40 mm   variable speed: yes   stroke rate (min.): 100 /min   stroke rate (max.): 600 /min TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 220 mm STRIP-FEEDER   feeder type: roll feeder   feeding step min.: 20 mm   feeding step max.: 100 mm ELECTRICAL SPECIFICATIONS   total power consumption: 4.5 kW   mains voltage: 380 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/ri ...

Attachment: Chamber filter press - as good as new, demonstrator Hours of operation: No Usage area: Chamber filter press, pilot plant, wine press Design: page Holm led Filter plate format: 390 x 390 mm Plate number: 14 Filter plates: PP Thickness: 25 mm Filter cloths: optionally available in voting on the medium Procedure: open Filter surface: approx. 2.8 m sq Presses contents: approx. 35 dm3 PCB package length: 391 mm Filter pressure: 15 PSI Plate transport: manually Frame: Steel Product-contacting parts: PP + stainless steel Dimensions: Lxwxh approx. 1695 x 750 x 630 mm Weight: 610 kg (photo identical plant) Pumps: optional Purchase or rent: Tours of the facilities in consultation with us to work. Added: multiple attachments are there about End of April available. Order please, because the demand is very high. You want to rent this facility or to buy? Contact us, we are available.

Stock number: UG5830 Used chamber filter press by FILTRI DIEMME model GIGANTE 1500. Frame type 1500 mm x 1500 mm /90. Press has 85 pp plates with bottom feeding inlet. Filtration surface about 321 m2. Press is equipped with control panel, Willet sludge pump designed for work on pressure 10 bar, polymer dosing system, cake washing system, photocell safety system. Plates designed for work on pressure up to 15 bar. Closing pressure 385 bar. Dimensions: length 10 m x width 2 m x height 2 m. Reported output up to 30 m3 of sludge per hour.

Sander Press Feed Type 260/40 Technical Data: 1. Feed (infinitely adjustable) 60 - 260 mm feed angle 118 degrees 2. Gripping distance per rail 40 mm gripping angle 58 degrees 3. Gripping railprof11 (T-nut pro1? 80 x 25 mm 4. Gripping rail position closed 305/350/395/440 mm 5. Gripping rail ingestion flat guide 6. Gripping rail slurl 2687 mm 7. Gripping rails 1323 mm 8. Gripping bracket width 73 mm 9. Position of the connection shaft basic geraet - outlet rim I 121 x 260mm outlet gable I - spout scope II 121 x 600mm 10. Diameter of the connecting shaft 11. Transport air above the press table 12. Drive by press (joint shaft) 13. Adjusted air pressure of the locking cylinders gripping 3.0bar 14th weight 1100 kg

Hydraulic safety lock from an overload: 125-250 tons Number of idle slide strokes per minute: -For the head press: 20 -For the subsequent press: 25 Number of microdrive strokes per minute: 0,45 Electric motor for the press table: 45 kW Electric motor for the microdrive: 17 kW Max. balancing weight of the upper part of die on the slide: 3,5 tons Distance between columns: 2550 mm Slide stroke: 400 mm Max. extract depth: 160 mm Slide adjustment: 250 mm Adjustment range of the extract depth: 0-160 mm Max. closed height: 800 mm Height of the pull-out table: 500 mm Table dimensions: 2500x1250 mm Table bore dimensions: 2100x850 mm Slide dimensions: 2500x250 mm Weight: 74500 kg

automatic baling press Manufacturer: PAAL Type: KONTI 275 F Built: 2007 Main parts of the press: 1 automatic duct press (without wire winding devices) 1 automatic lacing 1 Hydraulic system 1 Electric control technical data: Pressing force: 800 kN / 80 t at 300 bar Specific pressing force: 9.70 kg/cm2 Channel cross-section (h x w): 750 x 1,100 mm Filling opening: 1,020 x 1,600mm Number of connecting wires: 4 pieces vertically Drive power: Main pump: 1 x 45 kW Pump delivery capacity: 1 x 380 l/min Throughput: up to approx. 280 m3/h under operating conditions Performance at: - 35 kg/m3 bulk weight: approx. 9.5 t/h - 60 kg/m3 bulk weight: approx. 16.5 t/h - 100 kg/m3 bulk weight: approx. 26.0 t/h Hydraulic oil tank volume: 2,100 l Operating voltage: 3 x 400 VAC / 50 Hz / N / PE Other equipment: Operator Panel MP 270 auto ...

Cold stamping press Stanko P 0443 Capacity, tons: 2000 Nominal liquid pressure, kg/cm²: 320 Table size, mm: 1000 x 1000 Table stroke, mm: 500 Table speed, mm/s: 0,14 Rapid table speed, mm/s: 3,1 Distance between columns, mm: 1090 Shut height, mm: 800 Hydraulic drive motor, kW: 5,5 Voltage, V: 380 Frequency, Hz: 50 Press dimensions, mm: 2575 x 1500 x 3285 Press weight, kg: 27000 Price 21500 EUR

Glue press Etienne Format L x B: 3800 x 2700 mm Window frame press pneumatic Weight approx. 890 kg Year of construction 1980 The press is in good condition, ready to use. Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Hydraulic Abkant and used stamping press, under current hydraulical embossing press / press brake, used, under power Serial / make: Hämmerle type / model: 2s 100-2050 year / year: 1978 pressing force / force: 100 t Bending length / operation length: 2050 mm tappet adjustment / ram adjustment: 150 mm Distance from plunger table / distance ram to table: 400 mm Stroke / stroke: 150 mm connection value / connected load: 11 kW weight / weight: 5,9 t

- two rated power up to 600 kg/h engine power 1.5 (2.0) kW (PS) Electrical connection 400V 50 Hz (3 phases) Electrical fuse 16 A Laenge 1890 mm width 1210 mm He he 1510 mm Juice pan in 1.4301 / AISI 304 press force 24 to Press pressure 380 bar Juice yield up to 75% connection for juice drain 30mm High juice drain 420 mm Scope 18 pressing tuecher sier 80x80cm, 20 press inserts made of acacia wood 50x50cm ; New machine - best condition

Qty. 1 Second-hand extrusion press Mfc.: SMS – Schloemann Built: 1997 Force: 2200 MT Type: direct Operation pressure: 250 bar Billet dia.: 8” – 203 mm Length: 900 mm Force Main piston: 19.64 MN Feeding piston: 2.45 MN Retreat force: 1.18 MN Press stroke: 2100 mm Press speed: at force 22 MN (250 bar) up to 19.0 mm/sec. At force 15.4 MN (175 bar) up to 26 mm/sec.

Transfer press KRUPP PST-A 160 built in 1980. Technical data of the KRUPP PST-A 160 press: - nominal pressure: 160 tons - cutting force grade 1: 400 KN - force between stands: 1200 KN - number of working steps including cutting stage: 11 - distance between stands: 200 mm - slider stroke: 210 mm - drawing depth: 70 mm - range of jumps, infinitely adjustable: 15-75 / min. - production range of jumps with repeatability of its setting: 25-75 / min. - number of actuation movements: 15-25 / min. - a usable work resource for a jump in the range of 25-75 strokes per minute. : 20,000 J - maximum load on a single step: 500 KN - maximum load of a single step using inserts: 630 KN - maximum width of the tape: approx. 340 mm - maximum diameter of the cut: 120 mm - minimum diameter of the pattern: 30 mm - distance between stands: 2450 mm - height of tool building at the lower posi ...

Effort 500t Slide stroke 500mm Number of strokes per minute 20 Slider dimensions 3840 x 2290 x 2360mm Slider weight 17 300kg Adjustment of the distance between the slider and the table 500mm Max. open press height 1300mm Max. open die height 1280mm Min. Closed height of press 800mm Min. closed die height 820mm Height of sliding table 500mm The maximum force of 3 pillows of pressing 100t Cushion plate stroke 200mm Main motor power 75 kW Number of sliding tables (sideways movement) 1 Number of additional drawers 1 Press weight 136,700kg

Hydraulic drawing press make CAME Panasonic Matsushita type THB 120 x 100Model no 1882 year of construction 1996Max. Press force: 125 tRetraction force: 20 tCompressive force of the die cushion: 70 tRetraction force of the die cushion: 37 tOil pressure of the press: 210 barOil pressure of the die cushion: 140 barTable size: 1300 x 1000 mmPassage: 1600 x 1200 mmInstallation height: 1300 mmRam stroke: 900 mmOil filling: 1300 lRapid traverse from max.: 300 mm / sCylinder diameter: 224 mm + 2 x 112/80Cylinder Tissue Diameter: 310/180/310/250 mmWeight of the upper tool max.:2300 kgDrive power: 45 kWDrive Power Cushion: 22 kWDimensions L x W x H approx .: 4,000 x 3350 x 5400 mmWeight approx. 31 tWith- heated intermediate plate- Holding device- Photocell manufacturer SICK- Two-hand operation- UVV regulations according to 89/392 EEC- CE clampprevious use:Deep drawing of slit masks for the pictur ...

Used KLAUKE HK 12/2 EL / HK 25/2 EL Hydraulic pump press pliers Connection 400V 16A Press pliers Klauke PK 120 Pressing range up to 400mm² C-head with 42mm opening width For Series 13 Press Inserts Without pressing insert Good condition. Fully functional See pictures Original price complete approx. 7000.-Euro gross Viewing and pick-up possible Shipping Germany (without islands) 119,00 Euro including 19% VAT The goods can be viewed at the location 59379 Selm by appointment. Company Michael Bergau Tel. 0152/29500504 The price includes 19% VAT. You will receive an invoice with VAT shown. Payment: Payment by bank transfer before delivery of the goods. Or cash payment on collection.

Briquetting press MATEC F-Cube 20 new Dimension press LxWxH: 130x74x112 cm weight 233 kg Briquette square 30x30 mm Capacity approx. 10-25 kg briquettes / hour Size feed funnel approx. 0.33 m3 Motor hydraulic pump 2.2 kW, 3x 400 V, 50 Hz Electricity consumption approx. 1.1 kWh How we work Continuous operation Year of construction 2021 Additional options: - Extension line for briquettes with stand -Auto. Start-stop system for operation with level monitoring - Sensors for level monitoring - Hydraulic oil 30 liters - 3 m cable with Euro plug 16 A - Flange adjustment filter-hopper press The spec. Density of briquettes is about 900 kg / m3. The maximum wood moisture content is 15%. The measured noise level is 62 dB. New machine, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden  ...

Gluing stand VHS with motor hydraulics for gluing all frame constructions with dowel connection – tine connection – 45° miter connection. The motor-hydraulic gluing stands VHS are available in the following sizes: Maximum grouting range 2,500 x 1,800 mm 2,500 x 2,100 mm 3,000 x 1,800 mm 3,000 x 2,100 mm 3,500 x 2,100 mm Three vertical press cylinders with a stroke range of 120 mm and a pressing force of 2 tons each. Two horizontal press cylinders with a stroke range of 120 mm and a pressing force of 2 tons each (optionally, the gluing stands can of course be supplied with more press cylinders). Drive power 0.75 to 1.25 kW.

In the years 2004 – 2006 the hydraulics, polypropylene plates and plate trolleys were modernized. Available from November 2023. Machine name: Chamber filter press Manufacturer: Rittershaus & Blecher Type: 1200 Year of construction: 1976 Design: Bridge spar press Filter pressure: 15 bar Press capacity: approx. 2400 litres Procedure: Closed Filter area: Approx. 200 m2 Plates format: 1200 x 1200 mm Number of plates: 79 Panel material: Polypropylene Plate transport: Automatic Filter cloth washing system: Yes Cake thickness: 25 mm Closing pressure: 380 - 410 bar Dimensions: L 8100 x W 1600 x H 2000 mm Empty weight: 24,000 kg Tech. Documentation: Yes Note: Modernized in 2004 - 2006: hydraulics, polypropylene plates, carriages. It will be available from November 2023 Accessories: hydraulic system, a light barrier and a filter cloth washer Condition: Used Price: On req ...

In the years 2004 – 2006 the hydraulics, polypropylene plates and plate trolleys were modernized. Available from November 2023. Bwm2udrqym Machine name: Chamber filter press Manufacturer: Rittershaus & Blecher Type: 1200 Year of construction: 1976 Design: Bridge spar press Filter pressure: 15 bar Press capacity: approx. 2400 litres Procedure: Closed Filter area: Approx. 200 m2 Plates format: 1200 x 1200 mm Number of plates: 79 Panel material: Polypropylene Plate transport: Automatic Filter cloth washing system: Yes Cake thickness: 25 mm Closing pressure: 380 - 410 bar Dimensions: L 8100 x W 1600 x H 2000 mm Empty weight: 24,000 kg Tech. Documentation: Yes Note: Modernized in 2004 - 2006: hydraulics, polypropylene plates, carriages. It will be available from November 2023 Accessories: hydraulic system, a light barrier and a filter cloth washer Condition: Used P ...

Plate press Filter press Chamber filter press Industrial wastewater technology -used- Manufacturer: FAZZINI Type: F500 Operating pressure 15 bar Plate size 500 x 500 mm 20 plates with hydraulic unit 1.5 kW and piston pump 0.75 kW Dimensions: approx. 2400 x 750 x 1600 mm All items are checked for function before delivery, if technically possible !

Press brake edge machine edge bench press used Manufacturer: Mengele Type: C320-4B Built: 1966 last revision and repair: 2000 Location D-01587 Riesa Dimensions WxH: 6,250 x 3,650 mm Edge knife width: 6,150 mm sheet thickness at 6,000 mm bending length: approx. 7.5 mm. The machines are designed for very deep shaft bends, therefore very deep cheek recesses. Original 300 t pressing force - In 1989 the pressing force was increased to 350 t. The press is in very good condition despite its age. The machine is disassembled and ready for loading. documentation for the machine is available. Weight: about 45 t

Press with press area 2200 x 1100 with built-in mould press

: 3400,4550 mm Working height: 2500 mm : 300 - 800 mm Glazing and control press RU-VGP3 Glazing and sealing press, clamping width max. 3150 mm, Length 3400 mm, width 900 mm, height 2500 mm, contact height 1900 mm, Pressing beam height 2400 mm, plant part covered with felt, installation surface as roller conveyor, lifting device from 300 - 800 mm. Left and right each a role as edge protection for elements up to 2500 mm height. (When ordering specify whether RIGHT or LINKER Pressbar mobile!) alternatively: ------------- RU-VGP4 Glazing and control press, version like RU-VGP3 however span max. 4000 mm, length 4550 mm (When ordering specify whether RIGHT or LINKER Pressbar mobile! (technical data according to manufacturer - without guarantee!) Price on request ! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

THE WOOD PRESS FOR HIGH-QUALITY FUELS The RUF LIGNUM Classic wood briquette press is ideal for briquetting medium quantities of wood chips that accumulate in the woodworking industry. The briquetting process can generate additional revenue and reduce storage and transport costs. Another advantage is the flexibility of our wood briquette presses. You can press different material grains into high-quality briquettes without the need for a binder. As a result, RUF briquettes have a higher utility value and an optimal CO2 balance as a valuable energy source. Our LIGNUM series also impresses with high energy efficiency and low wear thanks to the innovative RUF hydraulics. YOUR BENEFITS AT A GLANCE - Fully automated 24-hour operation possible -Longevity - Low maintenance costs - Compact design - Direct integration into existing production facilities possible Bto8iej998 - Experience f ...

pressure: 2000 /1000 t distance between columns: 2650 mm stroke: 500 mm column travel -side: 500 x 1000 mm diameter of piston: 710 mm number of pistons: 2 distance between table / ram: 1000 mm operating pressure: 130 / 230 bar dayligth: 800 mm table length: 2500 mm table width: 1600 mm table height: 250 mm draw back pressure: 500 kN number of T-slots: 8 turning speeds: 1500 U/min rapid speed: 120 - 140 mm/min closing speed: max. 120 - 140 mm/sec. hydraulical ram locking: return of plunger by small single cylinders: 100 - 110 mm/sec cutting sound absorber: 300 t die cushion capacity: 200 t die cushion stroke: 250 mm speed of die cushion: 100 mm/sec voltage: 380 V frequency: 50 Hz quantity of oil: 2000 l total power requirement: 93 kW weight of the machine ca.: 90 t dimensions of the machine ca.: 5000 x 2500 x 7200 mm transport measurements: ca. 6500 x 3750 x 2190 mm 1991 assembly of a di ...

automatic baler Manufacturer: PRESONA Type: LP 65 VH2 Year of construction: 2007 specifications: Press force: 65 t Specific pressing force: 7.27 kg/cm² max. oil pressure: 265 bar Press force pre-press: 25 t Drive power: 45 kW Throughput: approx. 370 m³/h Filling opening: 1,500 x 1,100 mm Channel format: 750 x 1,100 mm (H x W) Bale weights: up to approx. 420-570 kg Setting: 5-fold vertical Oil tank: approx. 1,000 ltr. capacity Machine weight: approx. 21 t Optionally with chain conveyor belt Manufacturer: BLUETECH Type: Chain Conveyor Belt Year of construction: 2007 Specifications: Conveyor width: approx. 1,500 mm Feed length: approx. 6,000 mm Climbing length: approx. 10,500 mm according to attached pictures Subject to errors in the technical data.

Machine Name: Membrane Filter Press Manufacturer: Netzsch Type: 800/64 Year of construction: 1994 Design: Side rail press Diaphragm pressure: 15 bar Filter pressure: 15 bar Press capacity: approx. 960 litres Expiration: Closed Filter area: Approx. 70 m2 Plate size: 800 x 800 mm Number of plates: 64, mixing plate package Panel material: Polypropylene Plate Transport: Automatic Filter cloths: No Filter cloth washer: No Panel package length: approx. 3900 mm Cake thickness: 30 mm Dimensions: L 6100 x W 1300 x H 1900 mm Empty weight: approx. 6000 kg Tech. Documentation: Only for control cabinet / electrical documents Remark: Immediate availability Accessories: One control cabinet, one hydraulic system Condition: Used Price:On request

Machine Name: Chamber Filter Press Manufacturer: MSE Type: KPF 800-43-25K P-L-S Year of construction: 2002 Design: Side rail press Filter pressure: 15 bar Press capacity: approx. 540 litres Expiration: Open Filter area: Approx. 48 m2 Plate size: 800 x 800 mm Number of plates: 44 Panel material: Polypropylene Plate Transport: Automatic Filter cloth washer: No Panel package length: Approx. 2460 mm Cake thickness: 25 mm Closing pressure: 380 bar Dimensions: L 4800 x W 1500 x H 1980 mm Empty weight: 4600 kg Tech. Documentation: Yes Accessories: Control cabinet, a hydraulic system, a light barrier, drip trays, access platform, Netzsch feed pump and 3 x filter cake containers Condition: Used good Price: On request

Machine Name: Chamber Filter Press Manufacturer: Passavant Type: AX 1200 Year of construction: 1990 Design: Bridge spar press Filter pressure: 15 bar Press capacity: Approx. 1800 litres (expandable to 2500 litres) Expiration: Closed Filter area: Approx. 127 m2 (expandable to 175 m2) Plate size: 1200 x 1200 mm Number of plates: 51 (expandable to 70) Panel material: Polypropylene Plate Transport: Automatic Cake thickness: 30 mm Closing pressure: 360 bar Dimensions: L 8000 x W 1900 / 2500 x H 2300 + 600 mm Tech. Documentation: Yes Note: Available mid-February 2024 Accessories: A hydraulic system, a light barrier, a high-pressure pump Condition: Used Price: On request

Fully European, professional workshop electric press with a pressure of 100t. Made of the highest quality steel, it ensures maximum precision of work during manual or automatic operation. The press has two speeds of operation - the piston at idle (without load) descends very quickly to the workpiece - while when a load is detected, the pump automatically switches to the working mode - slower and precise. Equipped with an adjustable work table and an electric pump. Precision is ensured by a robust hydraulic system and perfectly balanced, robust components. Viber-System workshop electric presses are a must-have in every professional workshop that appreciates precise and fast work. Model Specification WP100HPRK: Model: WP100HPRK Press force: 100 tons Max. pressure 320 bar Piston stroke: 400mm Oil tank capacity: 27l No-load speed (idle): 16mm/sec Piston return speed: ...

Briquette press with extraction system Make Mütek Type MPP60 Year of construction 2011 Briquette mould cylindrical Diameter 50 mm Depending on the material, capacity up to 60 kg/h Drive motor 5.5 kW Volume of chip hopper approx. 0.7 m³ Weight of the press 680 kg Dimensions briquette press 1680 mm x 1100 mm x 1500 mm Height with container 2050 mm Including extraction system 33 filters, filter length 1300 mm, diameter 200 mm Extraction system filter area 27 m² Capacity 2,970 m³/h Fan motor power 5.5 kW Intake diameter 300 mm Overall dimensions with extraction system and fan 4300 mm x 1150 mm x height 3700 mm Almost all shredded materials can be briquetted with a residual moisture content between 6% and 18% without binder. e.g.: wood shavings, milling and sawdust, dust, paper, cotton flaky, coconut, wheat straw, hemp, hay, flax, plant stems, mal ...