We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,339 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Binding press, completely made of stainless steel (frame & all rollers) Bandwidth 1450mm, L x W x H: 4450 x 2100 x 2450mm. Processing capacity with apples approx. 4-6 t/h. Year of construction 1994 Other fruits, berries and vegetables are also possible. No compressed air needed! No complex control necessary! Belt tension by means of 2 pcs. 5t. crank winches and 2 steel springs Very little trub in the juice because no shear effect of 2 bands! Rotary brush & 2 rotary high-pressure nozzles for belt cleaning. This press is an improved replica of an (Amos Compact cover press, see Prospeckt from Amos) in contrast to the Amos press, all rollers in our press are completely made of stainless steel and with continuous shaft (not only shaft stumps) as well as in the interior again amplifier discs to significantly increase the stability of the rollers. The rollers lurk on plain bearings t ...
used
SMG DS 315-1500/1300 CNC hydraulic press was manufactured in 1984 in Germany. The machine, consisting of two interconnected stations, is used for pressing metal workpieces in manual, semi-automatic and automatic mode with a pressing force of up to 315 tonnes. All the machine’s machining parameters are set using a CNC control with a full-colour, touchscreen display. The press is equipped with a hydraulic and pneumatic sheet metal feeder, servo drives for feed rollers to set a very precise stroke of up to 0.1 mm, safety cages and workpiece feed and drop control sensors. The SMG 315 T machine underwent a complete overhaul in 2007, during which components such as pumps and safety installations were replaced. Technical data of the SMG DS 315-1500/1300 press - maximum press force: 315 t - working table dimensions (L x W): 1500 x 1300 mm - upper machine point (from the table): 750 mm ...
used
HACO ERM 30175 CNC press brake built in Belgium in 1999, performs precise bending of workpieces with a maximum length of 3100 mm. The robust, stable construction of the machine, together with a high press force of up to 175 tonnes, guarantee excellent machining results. The press is equipped with operator conveniences such as a pedal for foot control and a HACO bc40 GRAPHIC CNC control located on the arm. The total weight of the machine is 10 tonnes. Technical data of the HACO ERM 30175 press - CNC controller: HACO bc40 GRAPHIC - maximum press force: 175 t - maximum workpiece length: 3100 mm - bending speed: 8 mm/s - approach speed: 100 mm/s - return speed: 80 mm/s - distance between carcase walls: 2600 mm - reach: 300 mm - working stroke: 200 mm - safety distance: 300 mm - pedal for foot control - main motor power: 15 kW - waiting time: 75 ms - maximum pressure: 255 bar ...
used
The press brake HAMMERLE BM 200-3100 press brake was built in 1996. The folding machine was serviced regularly. Technical parameters of the press: - control: INFINITRON - number of NC axes: 11 - pressure: 200 tons - bending length: 3100 mm - working stroke: 400 mm - distance between the body walls: 3240 mm - maximum distance between the table and the bumper: 965 mm - voltage: 3 x 400 Volt - control voltage: 24 V = - total power: 28 kW - deflection arrow compensation - total machine width: 4400 mm - total height of the press: 3400 mm - weight of the press: 16 600 kg
used
Key data: 63 t
EUROMET Y41-63T hydraulic press manufactured in 2007 is designed for machining metal sheets, sections and profiles. EUROMET Y41 63T hydraulic press has a monolithic structure resistant to any deformations, which, combined with the 63-ton press force, allows to achieve excellent precision and quality of machining both in medium and large series production. Technical parameters of EUROMET Y41-63T hydraulic press - maximum press force: 63 t - work table dimensions (L x W): 580 x 560 mm - piston rod speed (pressure): 10 mm/s - piston rod speed (return): 95 mm/s - piston rod speed (no load): 38 mm/s - piston rod stroke: 500 mm - maximum piston rod feed: 800 mm - power: 7.5 kW
used
JJZ-CP type press designed for the production of plywood, doors, MDF. The glued elements are fed and removed from the press automatically by means of driven rollers. The press can be used with glue feeders. Specifications: -max. pressure 500T/ adjustable/ -max. load height 1300mm -max. batch size 1300x2500 -press size 3600x1370x4500 mm -press foundation ~500 mm below the floor level -feeding table 2000x1960 mm -receiving table 2350x2500 mm -max. power 13.2 kW -Ce -capacity of 6 batches per hour Currently, we glue panel doors and MDF board on presses. Very good technical condition. We offer a plywood production line dedicated to these presses.
used
Veneer Press Gluing Press Plate Press Heat Press OTT Type: JU 65 YOC 1977 Press dimensions : 120 x 225 cm incl. heating plates The machine originates from the age-related abandonment of a small construction and cabinetmaking workshop and is available now. Dismantling and loading can be organized by us. Settlement by appointment. Buyers can also pick up and test the machine themselves on site. Condition see pictures, or please refer to the item description. Parts can also be picked up by yourself. All measurements are approximate. All information to the best of our knowledge but without warranty. Subject to prior sale. The items can be picked up by yourself or shipped at the expense of the buyer. Shipping costs are a guideline. Depending on the agreement of dismantling and loading, or removal, these may differ. Please inquire in advance for more detailed cond ...
used
Automatic punching press, high speed press, eccentric press, single-column press, punching machine, single-column eccentric press. Manufacturer: Kaiser PO 10. Year of manufacture: 1982. Pressure capacity: 10 [tons]. Stroke: adjustable 2 to 40 [mm]. Speed: 120-600 [strokes/min]. Table size: 460 x 250 [mm]. Clamping pin: Ø 32 [mm]; depth 50 [mm]. Central automatic lubrication system. Connection: 380 [V]; 50 [Hz]. Manual speed adjustment on motor. Motor: Stober; 1.1 [kW]; 1450 [1/min]. Single disc clutch and brake. Dimensions: 1250/950/H1800 [mm]. Weight: 850 [kg]. El schematics included. Packing and loading included. Feeding device not included, if needed contact for more information.
used
SUTEAU ANVER XPM 18X13 300T receding head die cutting press was built in France in 2008. The machine aimed at mass production, is used in the process of precise cutting in foam and non-metallic materials, such as plastics, textiles and rubber. Built-in hydraulic systems combined with a stable design and reliable components ensure high precision and speed of cutting, regardless of machined material. The material taken from rolls or sheets is pressed against the machine head by the vertical movement of the working table, under which hydraulic cylinders are located. The cylinders exert a balanced pressure to achieve the ideal position of the table in relation to the head. The material is then machined using dies that can be mounted either to the head surface or on a lifted table. To facilitate the operator’s die positioning and the insertion and removal of the cut material, the SUTE ...
used
DURMA E 2040 CNC press brake which was built in 2009 in Turkey, offers the highest productivity and precision in workpiece bending, while maintaining low operating costs. The machine performs excellently even during the most intensive processing thanks to its extremely stable design, high press force of 40 tonnes and intuitive CNC control DURMA DU 6000. The work area is protected by the DFS LASER photoelectric safety device, which automatically switches off the machine’s power supply in the event of an interruption of the emitted laser beam. The price also includes tooling shown in the photos, worth 15 500 PLN. The DURMA E-2040 press brake weighs 4060 kg. Technical data of the DURMA E 2040 CNC press brake - CNC control: DURMA DU 6000 - maximum press force: 40 t - maximum workpiece length: 2050 mm - slider stroke: 160 mm - reach: 350 mm - distance between columns: 1650 mm - ap ...
used
The Strojane Piesok LODD 200 press brake was produced in 1982 by the Czechoslovak company Strojarne Piesok. The machine works with a force of 200 tons of pressure and allows bending sheet metal with a length of 4000 mm. The press is equipped with a table (L x W) 4000 x 200 mm, and its power is 22 kW. The total weight of the machine is 22,660 kg. Specifications of Strojane Piesok LODD 200 press - press force: 200 t - maximum bending length: 4000 mm - table dimensions (L x W): 4000 x 200 mm - upper tool maximum stroke: 100 mm - distance between table and slider: 200 mm - distance between body walls: 3300 mm - maximum number of clutch engagements: 14/min - main motor power: 22 kW - main motor speed: 1460 rpm - air pressure: 0,4-0,6 MPa - maximum air requirement: 25 m3/h - power supply: 380 V; 50 Hz - dimensions (L x W x H): 4420 x 2060 x 3800 mm - weight of the LODD 200 pre ...
used
Baler Europress 610 V5, year of construction 2012 / 2017 refurbished by the manufacturer, very good condition, with chain belt conveyor belt Europress Technical Data Press Manufacturer: Europress Type 610 V5 Year of construction 2012 / 2017 refurbished by the manufacturer Drive power 2 x 30 kW Press force 90 t Insertion shaft 1,450 x 1,100 mm Bale dimensions 1,100 x 730 x 1200 mm, length is variable Bale weight 400-900 kg 5-fold vertical setting, fully automatic Filling volume hydraulic oil tank 2100 L Transport dimensions excl. Press 8,500 x 2,650 x 2,850 mm Transport weight press approx. 21 t Detailed information on general overhaul on request. Technical data on the conveyor belt will follow. Currently, the press is still in use.
used
Portal straightening press with 400 T capacity Oil-hydraulic double column press a) No-load and pressing speed up to 17 mm/sec b) Opening speed up to 60 mm/sec c) Table size 6000x3000mm d) Open height 1500 mm e) Total size approx. LBH 6000 x 5000 x 4500 mm f) OIL temperature display on the tank g) Lubrication via lubrication nipples h) table in grid construction, i) Operation on swivel arm, mounted on the bridge j) Pressure setting from 60 T to 400 T via MONITOR k) Bridge moves through two geared motors, over racks l) Cylinder moves to the left and right over racks m) Machine body powder-coated, or double-painted n) T-grooves according to customer requirements o) Cylinder induction hardened PORTAL PRESS Thermally neutral 80 – 120 °C Number of operating pages 3 pages Forces Pressing force max. 4000 kN Free tearing force ...
used
Nestro briquetting press BP 1101 - with daily storage tank and discharge Product name: Briquetting press Type: BP1101 / 710045 Manufacturer: Nestro Machine number: 64637 Year of construction: 1992 Condition: used, functional, cleaned The briquetting press consists of four components: 1. Pressing unit mounted on the base frame 2. Daily storage container 3. Control cabinet 4. Hydraulic unit with motor and pump technical details: Motor power: 7.5 kW Voltage: 380 V / 50Hz Current: 16.5 A Rotation: 1,440 rpm Operating hours: 5,390 hydraulic tank oil pump: 170 l Briquetting capacity: approx. 70-90 kg/h - Articulated arm discharge in the daily storage container - Daily storage tank with connection nozzle 350 mm diameter Container dimensions (L x W x H): 2,400 x 2,400 x 1,600 mm Installation dimensions with metal pedestal (L x W x H): 2,600 x 2,600 x 2,350 mm ...
used
Eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press -Manufacturer: Kaiser, punching machine with gripper feed type PO 40 F -Pressure capacity: 55 tons -Stroke: adjustable from 9 to 60 mm -Stroke rate: 70-350 strokes/min -Table size: 590 x 410 mm -Table recess: 290 x 150 mm -Projection: 220 mm -Punching fixture: Ø 38 mm -Insertion height 335 mm -Dimensions: 1905/1540/H2940 mm -Weight: 3720 kg
used
Eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press, -Safety cage fully closed -pneumatic viewing window with finger protection -Pressure force: 35 tons -Projection: 190 mm -Strokes: 105 strokes/min -Plunger adjustable: 50 mm -Plunger area 250 x 200 mm -Adjustable stroke: 15-70 mm -Table size: 540 x 310 mm -Projection: 180 mm
used
For sale is a complete paper press line consisting of a Lindemann bale breaker / cardboard ripper, type PC 1000/1650, a Lindemann bale press type Bimax 20, including the complete conveyor technology and a Luehr dust extraction system. Technical data baler: Manufacturer Lindemann Type Bimax 20 Pressing force main press 100 t Specific pressing force 9,91 kg/cm² Pressing force free rammer 24 tonnes Chute dimensions 2,000 / 1,400 x 1,060 mm Bale dimensions 980 x 1100 mm (h x w), variable length Drive power of baler 5 x 22 kW Wirbulator drive power 11 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk weight of bulk density of 20 to 30 kg/cbm approx. 10 - 12 tonnes/hour Bulk density from 40 to 60 kg/cbm approx. 18 - 26 tonnes/hour Bulk weight from 70 to 100 kg/cbm approx. 28 - 40 tonnes/hour Bale weights approx. 650 to 950 kg Throughput volume in single-shift operation in ...
used
Specifications Maximum pressure: 50 tons Press force: 7.14 kg/cm² Duct cross-section: 1000 x 700 mm Bale weight: do 500 kg Power supply: 400 V/ 30 kW Number of ties: 3 horizontal Dimensions of the tailgate: 1250 x 950 mm Weight: about 10 tons Bale tying: automatic Open hopper allows filling with the conveyor belt. Knife on the press plate and on the frame of the press to cut off the excess material. Automatic regulation of the light from the duct. Automatic binding with wire Choice of the length of the finished bale Press plate stably guided on the large rollers Large flaps of the press chamber for easy maintenance
used
RADAELLI DELFINO 3 350T eccentric press built in 1978 in Italy by CUGINI RADAELLI & C, is the perfect solution for even the most intensive mass production of various types of parts. All of this is possible thanks to its extremely high press force of 350 tonnes and extensive machining capabilities, which enable, among others, precise cutting, machining, bending and punching of metal sheets and bands. To further increase production efficiency, the entire process can be fully automated after retrofitting the machine with a decoiler and sheet feeder. The RADAELLI DELFINO 3 H-type press weighs approximately 60 tonnes. Technical specifications of the RADAELLI DELFINO 3 mechanical press - maximum press force: 350 t - work table dimensions (L x W): 2500 x 1600 mm - slider dimensions (L x W): 2500 x 1200 mm - slider adjustment: 200 mm - slider stroke: 300 mm - number of slider strokes: 2 ...
used
Description: AMBROGIO GALLI 40 GAMMA Eccentric Press Line Includes : - n.1 AMBROGIO GALLI 40 GAMMA Eccentric Press Pressure 40 TON Min/max stroke 9/100 mm No. of strokes 80/210 Motor power 2/6 HP Table size 750x450 mm Press size 1500x1500x2900 mm - ISOTEC soundproof cabin Dimensions 1900x1800x3100 mm - n.1 ELMEA decoiler Model SC18A71 production year 1972 Maximum coil size 300 mm Reel holder size 1600x1000x1600 - ELMEA decoiler Model MS10A production year 1997 maximum coil size 300 mm Reel holder size 1500x1300x1600 - Exit conveyor - Electrical panels for press - Protective grills NOT INCLUDED IN THE ITEM NOT INCLUDED : - N.2 feeders for eccentric press - N.1 control/vision for feeders , - No. 1 BRANKAMP process control system - N. 1 packaging exit conveyor weight approx.: 10,000 kg, Approx. Onsite Dimension. (l x w x h): 10,000 x 4,500 x 3,500 mm
used
pressure:250 t table length:4000 mm table width:3000 mm Controls:SIEMENS SIMATIC C7 PRESS DESIGN:. - frame design : 4 column :. - moving bolster : yes :. PRESS FORCES:. - total force (nominal):250 to PRESS TABLE:. - clamping surface (left-right):4000 mm - clamping surface (front-back):3000 mm RAM:. - clamping surface (left-right):4000 mm - clamping surface (front-back):3000 mm RAM (HYDR. PRESS):. - number of main-cylinders:1 - approximation velocity max.:50 mm/s - restoring force of ram:85 to RAM EJECTORS:. - stroke:300 mm - force:14 to DIE CUSHION (TABLE CUSHION):. - force of cushion:20.5 to - stroke:320 mm TOOL ASSEMBLY DIMENSIONS:. - distance table - ram max.:2750 mm - distance between columns (H-frame):4100 mm - Free passage between side columns (width):1500 mm ELECTRICAL SPECIFICATIONS:. - total power consumption:45 kW - mains voltage:400 V - mains frequency:50 H ...
used
PRESS DESIGN drive system: eccentric / crank openings in uprights: yes number of suspensions: 1 number of slide actions: 1 table cushion: no PRESS FORCES total force (nominal): 125 to PRESS TABLE table surface (left-right): 1100 mm table surface (front-back): 630 mm SLIDE table surface (left-right): 700 mm table surface (front-back): 400 mm stroke: 150 mm stroke rate (max.): 70 /min SLIDE (MECHAN. PRESS) slide adjustment: 90 mm stroke adjustment: yes stroke min.: 15 mm stroke max.: 150 mm stroke rate (min.): 20 /min stroke rate (max.): 70 /min main drive power: 15 kW TOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 400 mm ELEC ...
used
CONTROLS PLC PRESS DESIGN drive system: eccentric / crank frame design: C-frame, single sided number of suspensions: 1 PRESS FORCES total force (nominal): 200 to PRESS TABLE table surface (left-right): 1400 mm table surface (front-back): 800 mm SLIDE table surface (left-right): 1000 mm table surface (front-back): 600 mm SLIDE (MECHAN. PRESS) slide adjustment: 120 mm autom. Slide adjustment: yes stroke min.: 20 mm stroke max.: 200 mm stroke rate (max.): 45 /min hydraulic overload protection: yes DIE CUSHION (TABLE CUSHION) number of cushions: 1 TOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 510 mm ELECTRICAL SPECIFICATIONS mains voltage: 380 V DIME ...
used
CONTROLS PC controller FEINTOOL FMC (BECKHOFF) PRESS DESIGN drive system: servomechanic feedstock transport direction: left to right SLIDE total force (nominal): 250 to stroke: 70 mm stroke rate (max.): 140 /min COUNTER RAM nominal force: 625 to stroke: 25 mm V-RING nominal force: 1250 to stroke: 25 mm TOOL DIMENSIONS lower table (left-right): 600 mm lower table (front-back): 600 mm upper table (left-right): 600 mm upper table (front-back): 600 mm shut height max.: 380 mm ram adjustment: 125 mm STRIP-FEEDER sheet width max.: 250 mm sheet thickness max.: 10 mm feeding step min.: 0.1 mm feeding step max.: 300 mm sheet length min: 2500 mm CR ...
Qty. 1 Second-hand extrusion press line Mfc.: 3TC, Allen Bradley, Rexroth, Gautschi, Elhaus, Nederman, Hydrotec, Marx GmbH, Truninger, Ekatech Force: 3500 MT Built: in 1960’s Pressure: 315 bar Billet dia.: 343 mm x 900 mm (can be modified 14 x 1.0 m) Modernisation: 2011 Complete exchange of control system on press to Allen Bradley Control Logix including encoders for Ram, Container and Shear. Change of pump controls to Bosch Rexroth HS4. 2012 Complete change of hydraulic system (excluding pumps). New side cylinders and container cylinders. Safety rebuild of press and with change of PLC to Allen Bradley Control Guard Logix L72S (which is the current CPU). Change of control system of billet furnace. Complete new electrical system and integration of logic into the press PLC. Modernisation of gas burners in the furnace. 2013 Change of one of the main pumps to Bosch Rexrot ...
used
used chamber filter press / filter press used chamber filter press / filter press Passavant 1200 x 1200 record size: 1200 x 1,200 mms benefit length: 4,000 mms record number: 68 cake thickness: 30 mms filter pressure: 15 cash Schliessdruck: 350 cash record material: PP records expiry: unanimously engine tension: 380 volts / 50 hertz record transport: automatically filter cloths: optionally
new
Test press for single-axial pressure tests from 0 to 10 KN (0 to 1,000 KG) Purpose: Test press for single-axial pressure tests from 0 to 10 KN (0 to 1,000 KG / 10 KN maximum load). Without distance measurement. Manual lifting spindle press - Static pressing force 5 KN (0.5 to) - Portable, stable press frame made of polyamide PA 6G - Manual spindle stroke gearbox with spindle 20 mm, incline 5 mm - With handwheel diameter 120 mm and handle - Gearbox reduction 1: 10, per handwheel revolution 0.5 mm spindle path - This requires only very low hand force. - Table size 235 195 mm - Light width 190 mm - Stamp size diameter 70 mm - With 4 holes 8 mm for fixing a larger stamp plate - Very easy to operate by spindle and worm gearbox - Total weight approx. 25 kg Force measuring device: Weighing module with shear rod load cell for nominal load 1,100 kg. ...
Qty. 1 Second-hand extrusion press including (water-hydraulic system) Mfc.: Loewy - Hydropress USA Built: TBA Force: 12,000 UST Modernised: 2011 & 2014 (new PLC and control panels) Billet dia.: 14’’ – 26’’ (355.6 – 660.4 mm) Billet length: max. 65’’ (1651 mm) The press was used for the production of pipe up to 508 mm diameter and up to 50 mm wall thickness by the current owners. In 2011 the Press was partially rebuilt at which time all valves were rebuilt with new wear components, all brass was replaced for the container and rams and the loader table was rebuilt. In 2014 all new PLC Controls and the Control Pulpit were installed. Note: The water-hydraulic system is not included in the scope of supply due the system is also using for another extrusion press.
used
Rated power up to 300 kg/h engine power 1.5 (2.0) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 16 A Laenge 1178 mm Width 800 mm Hoehe 1907 mm Juice pan in 1.4301 / AISI 304 Press force 24.2 to Press pressure 380 bar Juice yield up to 65% Connection for juice drain 30mm High juice drain 525 mm High marc ejection 640 mm Supplied 1 press bag 100l, 3 inserthuellen 48cm, 3 press inserts made of acacia wood 48cm ; New machine - best condition
used
Packing press 180P2 Inox with hydraulic lifting and vertical device Nominal power up to 1200 kg/h engine power 1.5 (2.0) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 16 A Laenge 2250 mm Width 840 mm He 1880 mm Maximum acceptance 1380 mm Weight 1020 kg Material 1.4301 / AISI 304 Press force 50 to Press pressure 270 - 320 bar Juice yield up to 75% Connection for juice drain 1 1/4 High juice drain 420 mm Scope 22 Pressing tummy 100x100cm + 24 press inserts Stainless steel 65x65cm ; New machine - best condition
used
We sell a stone press for laboratory purposes. The press is in the very good clean condition. The press is however without control and without cooling unit. Stones can be pushed down with the stone press (breaking load tested). The machine is vorführbar on a tour. Also she has been tested every year!
used
ZTS KOSICE LEK 160 eccentric press was built in 1985 in Czechoslovakia. The press, operating with a force of 160 tonnes and a slider making up to 50 strokes per minute, is designed for, e.g. punching, cutting and pressing of workpieces. Machining is performed on a large work table with a length of 1000 mm and a width of 740 mm, with full illumination in the form of a lamp mounted on the body of the KOSICE LEK 160 machine. The total weight of the machine is 12180 kg. Technical data of the ZTS KOSICE LEK 160 press - maximum press force: 160 t (1600 kN) - work space dimensions (L x W): 1000 x 740 mm - maximum number of slider strokes: 50/min - number of slider strokes in single mode: 32/min - maximum slider stroke: 160 mm - minimum slider stroke: 25 mm - slider adjustment range: 100 mm - reach: 355 mm - workspace illumination - weight of the KOSICE LEK-160 machine: 12180 kg
used
PONAR ŻYWIEC PHM 160 D hydraulic press manufactured in Poland in 1990 is used for machining metal and processing plastics (e.g. polofen or melamine) or rubber. The machine characterised by its high reliability, performs precise machining with a force of 160 tonnes in manual mode as well as in semi-automatic or automatic mode, thanks to its being equipped with time relays. The gantry press is also equipped with, among others, a hydraulic ejector with a force of 60 tonnes and two temperature controllers for the upper and lower parts of the heating plate. The offered machine was purchased from the university and has never worked during typical production. The total weight of the machine is 4000 kg. Technical parameters of the PONAR ŻYWIEC PHM 160 D press - maximum pressing force: 160 t (1600 kN) - ejector force: 60 t (600 kN) - working table surface (L x W): 800 x 800 mm - pressing ...
used
I sell several machines, equipment here. spare parts, etc. for woodworking, Forklifts, work platforms as well as accessories and spare parts for forklifts and work platforms. Therefore, be sure to check out my other auctions Briquette press briquetting press chip press Pressing unit without control WEIMA TYPE: TH50 Briquette diameter approx. 50 mm Motor power hydraulics 5.5 KW They only bid on the briquette unit incl. hydraulic power unit. there is no control. I still have a control for briquette press with LOGO module. This can be purchased at an additional cost. The power unit could not be tested. Will be sold as it says here. ( See pictures ACTUAL - condition) Prior viewing is expressly desired, just leave phone no. by mail, then I will get back to you for a viewing appointment. Subject to prior sale, all information is subject to change. The ma ...
used
Veneer press - School press - Experimental press BÜRKLE U40 built 1979 Ges. Power: 6.25 kW Nominal operating current: 14.5 A Power per heating plate: 2,750 W Plate size: 120 x 80 cm Electric Aluminum Heating Plates max. temperature: 120° C Opening width: 40 cm 4 hydraulic cylinders each with a diameter of 70 mm Nominal surface pressure: 4 kp/cm² max. surface pressure at 75% surface design: 5.5 kp/cm² Operating pressure: 260 bar Circumferential safety ripcord (emergency stop) Automatic opening (automatic opening after the preset time has elapsed) Press frame in dismountable design Weight: 1,350 kg Machine dimensions (approx. dimensions): L 165 cm W 96 cm H 173 cm School machine - The machine comes from a school training center.
used
Europress EP 6500 V5 H4, pressing force 120 t, year of construction 2009, drive power 75 kW, only 15,334 operating hours, overhauled Specifications: Manafacture: Europress Type 6500 V5 H4 Year of construction: 2009 Operating hours 15,334 hours, as of January Number of pressed bales 138,097 bales, as of January Pressing force main press 120 t Specific pressing force 142 kg/cm² Dimensions insertion chute 1,650 x 1,100 mm Filling volume 3 m³ Filling volume / pressing cycle 1.58 m³ Bale dimensions 730 x 1,100 Length variable Drive power 75 kW (1 x 30 kW + 1 x 45 kW, individually switchable) Total connected load 83 kW Current consumption 150 A Binding 5-fold vertical, 4-fold horizontal, fully automatic Bale weights 450 to 900 kg, depending on bale length and material Hydraulic oil tank volume 1,200 L PLC control (manuf., type) Siemens S7-200 Control Panel (Manufactur ...
used
Qty. 1 Second-hand extrusion press including log furnace Mfc.: SMS Built: 1986 Force: 960 MT (9.3 MN) Press jaw: Wide: 155 mm Height: 140 mm Max. inlet: 130 mm (144 mm block, 5 mm protection per side) Recipient: 149,9 mm Extras: Heatable tool cassette from Marx (installed 2016) Conversion of recipient to resistance heating (beginning of 2016) Punch press disc: 149,2 mm Broaching disc: 150 mm Billet Ø: 144 mm Length: 265 – 540 mm Log length: 3000-4800 mm Log Furnace Mfc.: Extrutec GmbH Built: Temperature: 480-520 °C Zone 1: 460-490 °C Zone 2: 440-470 °C Zone 3: 400-450 °C Table weight: Max. 1350 g/m Min. 80 g/m Electrical control cabinet Puller Exhausting system Cooling device Spare parts for furnace combustion air Spare parts head burner Spare parts oven stove bo ...
used
Press clearance for boneless hams, Spanish type format, from the manufacturer ROSER, model 02. Rectangular mold in stainless steel. Against molds of technical plastic material Boneless ham format Spanish type of 6 to 7 kg. Interchangeable mold formats. Hydraulic drive. Regulation of massage and pressing time. Safety system operated by two pushbuttons. Built in AISI-304 stainless steel. External measurements: length 1090 mm x width 1650mm x height 2050mm. Weight: 1800kg. Power consumption: 4Kw. 400V. Air consumption: 5 liters/min Production of: 30/120 pcs /h. Ham press, ham press, rectangular ham press, meat machinery, machinery for sausages, machinery for hams. Its condition is excellent re-release. Equipment revised and guaranteed practically new.
new
Used Hydropneumatic Press / Assembly Press / Printing Joining Press - Pressing force 10 KN (1 to) - Used hydropneumatic cylinder make TOX - Pneumatic two-hand control - Portal frame aluminum profile 90 90 mm - Machine table made of aluminum profiles and multiplex plate 700 700 mm - Total weight approx. 50 kg Suitable as an assembly press for insezing components. With x- and y-adjustment alignable vice for die diameters up to 80 mm. Or for small punching or embossing tools. All tools or vices are quickly changed through the groove system.
used
Briquette Press Briquetting Press Chip Press Pressing unit without feed auger/hopper WEIMA TYPE: TH500 Briquette diameter approx. 50 mm Hydraulic engine power 7.5 KW Pressing capacity approx. 800 Kg/h Here you bid on the complete press including control without feed screw and bunker. Machine was connected and test run, pump and cycle work perfectly. Wiring diagram is also available. ( See pictures ACTUAL - condition) Prior viewing is expressly desired, just leave phone number by e-mail, then I will get back to you for a viewing appointment. Subject to prior sale, All information subject to change. The machines can be picked up by yourself or shipped by freight forwarder at the expense of the buyer. Loading or packing can be organized by us. The shipping costs are a guideline, depending on the distance and unloading option they may vary, please inquire.
used
DENER DMP 3100/200 SMART CNC press brake was built in 2007 in Turkey. The machine, distinguished by its extremely stable construction, high press force of 200 tonnes and excellent precision, is the ideal choice for even the most intensive machining in any production facility. To further improve the machining process, all parameters are programmed in the intuitive CYBELEC DNC 60 CNC controller with many useful functions. The total weight of the machine is 10500 kg. Technical data of the DENER DMP 3100/200 SMART press brake - CNC control: CYBELEC DNC 60 - maximum press force: 200 t - maximum workpiece length: 3100 mm - WILA hydraulic top and bottom tool clamping - motor power: 15 kW - maximum pressure: 290 bar - oil tank capacity: 150 l - weight of machine: 10500 kg
used
PLASOMAT PMS 63 CP eccentric press was manufactured in Poland. In order to meet all production requirements, the machine features a large area slider with the possibility of adjusting the height and number of strokes in the control cabinet. In addition, a stable, deformation-resistant monolithic structure combined with a high pressing force of 63 tonnes ensures the highest accuracy and precision in machining. All this makes the PMS 63 CP press the ideal choice for both small batch and high volume production. The offer includes additional equipment, consisting of among others 8 anti-vibration pads and an intermediate table. Technical specifications of the PLASOMAT PMS 63 CP press - maximum press force: 63 t (630 kN) - work table dimensions (L x W): 800 x 560 mm - number of slider strokes: 65-85/min - maximum slider stroke: 110 mm - minimum slider stroke: 8 mm - slider adjustment: ...
used
Briquetting Press Briquette Press Spänex Type SHB 50 K1 CE Built in 1986 Hydraulic briquette press With shavings container K1 Briquette mould 8-sided Briquette size 70 mm x 120 mm Capacity 50 kg/h Drive motor 5.5 kW Hours 35665 Wood moisture minimum 8% - maximum 20% Weight of the press 650 kg Chip container size 3m³ Chip hopper with agitator and feed screw Dimensions set-up 1500 mm x 1500 mm, height 2250 mm Almost all shredded materials can be briquetted with a residual moisture content between 6% and 18% without binder. e.g.: wood shavings, milling and sawdust, dust, paper, cotton flaky, coconut, wheat straw, hemp, hay, flax, plant stems, malt germs, ... The maximum chip size should not exceed 20 x 1 mm. Due to their density, briquettes have a volume reduction of up to 90% in the material and thus an extremely high energy and thus calorific value 2.5 kg of ...
used
Portal straightening press with 300 T capacity a) No-load and pressing speed up to 17 mm/sec b) Opening speed up to 55 mm/sec c) Table size 2500x1600mm d) Open height 700 mm e) Total size approx. LBH 4500 x 2300 x 3700 mm f) OIL temperature display on the tank g) Lubrication via lubrication nipples h) Table in grid construction, with T grooves according to customer requirements, otherwise 22mm i) Operation on swivel arm, mounted on the bridge j) Pressure setting from 50 T to 300 Tvia MONITOR k) Bridge moves through two geared motors, over racks l) Cylinder moves to the left and right over racks m) Machine body double painted n) Cylinder induction hardened Design Press type PORTALPRESSE Thermally neutral 80 – 120 °C Number of operating pages 3 pages Forces Pressing force max. 3,000 kN Free tearing force max. 500 kN Pressure build-up time Closed tool St ...
used
Continuous press Wemhöner Year of construction: 1978 Upper piston press – lower press table is always standing at a constant height Pressing area approx. 4300 mm x 1350 mm 8 pressing cylinders from above was used as a cold press Water pipes available for connection to hot water still electrically connected, in operational condition with 1 roll replacement continuous film 1400 mm wide
used
installation consisting of the following components: - glue station for 2-component glue - Input table with motorized rollers and 90 ? rotation - Composition table and loading in the press - Press model FAST / 130 - Horizontal pressure installation mounted on adjusted beam - Outfeed roller conveyor, not motorised technical data: dimensions of strips: length: 900 to 8,000 mm width: 20 to 45 mm height: 50 to 200 mm plates to be produced: length 8000 mm, 2 x 4000 mm, 4 x 2000 mm or 4 x 900 mm Bonding press: Dimensions: 1300 x 8500 mm press opening: 250 mm. Total pressure: approx. 200 tons 12 x overhead hydraulic pressure cylinders 2 rows of cylinders can be switched off 17 x lateral cylinders, individually switchable horizontal pressure 7 kg / cm? Attached electric boiler for thermal oil
used
Kannegiesser temple press collar and lapel press XKK-B DPF Kannegiesser Ironing press Collar and lapel press model XKK-B DPF Machining collars & cuffs in a single operation Dimensions: depth 130 cm x width 114cm x height 145cm Year of construction 11/1998 Weight 390 Kg Operating pressure 8 bar Air consumption approx. 100 Kg Vapour pressure 16 bar with control Kannegiesser IBT-Net Device runs flawlessly
used
Passage width 2500 mm Stroke 900 mm Total power requirement 62 kW Machine weight ca. 27,5 t Dimensions L x W x H approx. 3950 x 2200 x 4850 mm Retraction force 40 t Master cylinder 2 pieces Column diameter 220 mm Installation height 1300 mm Table size 2500 x 1600 mm Ram size 3100 x 16000 mm Table height above floor approx. 900 mm Flow speed 200 mm/sec Return speed 200 mm/sec Working speed 5 - 15 mm/sec Oil tank 1500 l Oil quantity 1200 l Pressure control adjustable from up to 50 - 400 t Thermoforming cushion 1400 x 800 mm Deep-drawing unit capacity 30 - 60 t Deep-drawing cushion stroke 250 mm Deep-drawing cushion speed 5 - 80 mm/sec robust machine body with solid welded construction low-maintenance and reliable Piston rod with induction hardening and chrome cladding T-slots according to customer requirements, if not specified 22mm according to DIN CE Certific ...
used
RUIAN KODA MACHINERY punch press, built in China in 2020, was used in a production line to create film gloves rips. The machine has 3 tonnes of press force and the ability to change punches of different sizes. The total weight of the machine is 200 kg. Technical specifications of the RUIAN KODA MACHINERY pneumatic press - pressing force: 3 t - workspace (L x W): 260 x 260 mm - working stroke: 150 mm - pneumatic pressure: 0.5-0.8 MPa - power: 30 W - power supply: 220 V - total weight of the press: 200 kg
new
PY-3.5 T fly press is used for extrusion and pressing of bearings and bolts, as well as for other locksmith work. The offered manual screw press with a maximum pressing force of 3500 kg is new. Technical data of the PY-3.5 T press - maximum press force: 3500 kg - stroke: approx. 200 mm - weight of machine: approx. 100 kg