140,790 used machines on RESALE, but how to find them? Machine Search
Promess KA-EMF20/150 Servo Press 20 KN Manufacturer: Promess Type: KA-EMF20/150 Type: Servo Press KN: 20 Item Condition: New Calibrated: Yes Strain gauge amplifier: BA 62601 More servo presses new and used - you can find them in our shop! International shipping costs on request!
Designed to ISO2858 the ECC (close coupled) Plastic Mechanical Seal Pumps are heavy duty pumps.
Specifications: Capacity 63 tons 2 strokes 105 rpm and 140 rpm large projection 450 mm ! Plunger stroke 8-100 mm Plunger adjustment approx. 70 mm Table , WxD approx. 700 x 780 mm Plunger, W x D approx. 450 x 280 mm
Bale size (W x H) approx. 1,100 x 700 mm Bale weight approx550kg
Designed to ISO2858 the ECC (close coupled) Plastic Mechanical Seal Pumps are heavy duty pumps.
Functional, used chamber filter press with motorized hydraulics and closed filtrate outlet.
Specifications: Capacity 50 tons Stroke rates 115 rpm Projection 250 mm Plunger stroke 8 - 120 mm Plunger adjustment approx. 70 mm Table , WxD approx. 650 x 500 mm Diarrhoea och approx. 250 x 180 mm
Specifications: Capacity 300 to Stroke rate 35 strokes Plunger width 1000 mm Projection 450 mm Plunger stroke 20 - 140 mm Plunger adjustment 80 mm Engine power 30 hp Weight roughly estimated 18 tons
800-chamber filter press with motor hydraulics, closed filtrate drain and automatic plate displacement. When the filtrate drain is closed, the filtrate runs through channels within the plate pack to the connections on the fixed stand.
automatic baler Manufacturer: WELGER Type: SB 2000L Machine No.: 1307 51 321 specifications: Pressing force: 7 t Drive power: 11 kW Bale format 500 x 400 x length in mm Machine weight: approx. 1.9 t
Press screw REG-MAC for drying foils and fibres, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw
Key data: 80 , 1050 , 450
MODEL ST-80 Power t 80 Motor power kw 3 Working speed mm/s 3.8 Approach speed mm/s -- Return speed mm/s 4.7 Maximum pressure bar 315 Piston stroke – J mm 450 Lower table mm 1,000 x 1,750 Head Displacement – C mm 730 Bridge Displacement – D mm 1,100 Front light – A mm 1.050 Vertical light – B mm 500 Working height – E mm 800 Total front – G mm 2,000 Total side – H mm 1,750 Overall height – I mm 2,250 Weight kg 1,700 STANDARD DESCRIPTION: We have designed ST series motorized hydraulic presses, with movable gantry and adjustable head, available in three powers from 80 to 150 tons. They are specifically designed for the straightening of welded structures and plates cut by oxy-fuel or laser. Its design facilitates the loading and unloading of large parts, plates or structures, optimising working times. Thanks to the lateral displace ...
USED OBEDINENT ECCENTRIC PRESS DESCRIPTION: The frame and slide are constructed of cast steel, with dovetail guides, with a base intended for oil recovery and equipped with mechanical extractor. For the protection of the press and dies. It has two compensating cylinders, pneumatically driven, for balancing the slide and dies. The connecting rod is built in alloy steel and long dimensioned. The clutch-brake is electro-pneumatic actuated, equipped with a double-body safety solenoid valve with cross-flows. Lubrication is carried out by means of a centralised manual pump and the pneumatic installation is equipped with a compensation tank, filter-regulator-lubricator unit with a control pressure switch and safety valve. On the front of the press is the two-handed shot, with an emergency stop button and a stop button in upper neutral. OB-100 TECHNICAL SPECIFICATIO ...
HOT PRESS model SIMI 4LP second hand machine plates useful size mm. 2500 x 1300 n.04 pistons diam.mm. 80 max. thrust Ton. 60 specific pressure max. kg.2 / cm2 opening mm. 320 hot water plates heating via wood boiler (optional) weight kgs. 3000
Press screw REG-MAC for drying foils and fibres, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw
Hand spindle press, mandrel press, spindle press, hand spindle press, printing press, balance printing press -Spindle press: Hand spindle press -Pressure: max. kg -Stroke: 60 mm -Intermediate dimension: 200 mm -Dimensions: 1020/600/H1520 mm -Weight: 120 kg
pressing area: 2500mm x 1100mm; opening: 400mm; heating: elektrisch; plate surface: ALU - Gold eloxiert; Emergency stop switch: yes; pressure: 65t; number of cylinder: 4; electricity: 22A; machine length: 3500 mm; machine width: 1300mm; weight: 3000kg;
Metal press manufactured in 2018. This Dunkes HR75 features a nominal straightening force of 750 kN and a maximum ram stroke of 160 mm. The machine has a usable shaft length of 3000 mm and a throat depth of 250 mm. If you are looking to get high-quality straightening capabilities, consider the Dunkes HR75 machine we have for sale. Contact us for further details.
VORONEZH K8544 Hot Forging press YEAR : 1980 / 2008 OVERHAUL AND INSTALLED FORCE : 2500ton RAM STROKE : 350 mm RAM SIZE : 1120X1070 mm TABLE OVERALL SIZE : 1400X1200 mm NUMBER OF STROKES IN CONTINUOUS MODE : 60 NUMBER OF STROKES IN MANUAL MODE : 26 SHUT HEIGHT : 890 mm STROKE OF UPPER KNOCK OUT : 60 mm STOROKE OF LOWER KNOCK OUT : 70 mm MAIN MOTOR : 132KW (CHANGED TO HYUDAI HEAVY Y2012) PRESS OVERALL DIMENSION : 5380X4680X6400 mm HYDRAULIC BOLSTER NEW IN 2007 CONDITION : VERY GOOD WORKING CONDITIONS Trimming press available
Specifications Maximum pressure: 60 tons Press force: 156 t/m² Bale size: 1100 x 1100 x 700 mm Bale weight: 400 kg Power supply: 400V/ 13kW Year of construction: 2014 Dimensions of the tailgate: 2815 x 1085 x 2250 mm Machine weight: 7.5 t The machine is functional
SECOND HAND BENDING PRESS - plates dimensions mm. 3100X800 - opening mm. 800 - 8 cyl. diam. 80 mm.
Pos. 5 – 1 1000 MT Press Mfc.: Yejing Force: 1000 T Type: LH Press Built: 2016 Billet: dia. 127 x 580 mm Auxiliary Built: 2020 Mfc.: Jiangshun Water Tank + Air Cooling Cooling bed: 38 m x 7.5 m Pos. 5 – 2 1000 MT Press Mfc.: Yejing Force: 1000 T Type: RH Press Built: 2016 Billet: dia. 127 x 580 mm Auxiliary Built: 2020 Mfc.: Jiangshun Water Tank + Air Cooling Cooling bed: 38 m x 7.5 m Pos. 5 – 3 1000 MT Press Mfc.: Yejing Force: 1000 T Type: LH Press Built: 2016 Billet: dia. 127 x 580 mm Auxiliary Built: 2020 Mfc.: Jiangshun Water Tank + Air Cooling Cooling bed: 38 m x 7.5 m Pos. 5 – 4 1000 MT Press Mfc.: Yejing Force: 1000 T Type: RH Press Built: 2016 Billet: dia. 127 x 580 mm Auxiliary Built: 2020 Mfc.: Jiangshun Water Tank + Air Cooling Cooling bed: 38 m x 7.5 m Pos. 1 – 4 1000 MT Press Mfc.: Yejing Force: 1000 T Type: RH Press Built: ...
Gluing Press / Press Rotor / Gluing Stars For the production of solid wood panels or similar Manufacturer: ACMA Levels: 4 Hydraulic Cylinders: 6 per level Hold-down: 2 frames per level Working area per level approx. 2900 x 1150 mm
Press screw REG-MAC for drying foils and fibres, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw
Qty. 1 Second-hand Aluminium Extrusion Press Lines (Pos. 2-1, 8-2, 12-1, 12-2, 12-3 & 12-4) Pos. 2-1 - 1450 MT Press Mfc.: Yejing Force: 1450 T Type: LH Press Built: 2017 Billet: dia. 152 x 6000 mm Auxiliary Built: 2019 Mfc.: Jiangshun Water Tank + Air Cooling Cooling bed: 38 m x 9.0 m Pos. 8-2 - 1450 MT Press Mfc.: Yejing Force: 1450 T Type: RH Press Built: 2015 Billet: dia. 152 x 6000 mm Auxiliary Built: 2020 Mfc.: Jiangshun Water Tank + Air Cooling Cooling bed: 38 m x 9.0 m Pos. 12 -1 – 1450 MT Press Mfc.: Yejing Force: 1450 T Type: LH Press Built: 2020 Billet: dia. 152 x 800 mm Dim.: 14 x 7.1 x 4.7 m Weight: 124 T Log length: 6.0 m Auxiliary Built: 2020 Mfc.: Jiamgsun Water Quench + Air Cooling Cooling bed: 38 m x 9.0 m Pos. 12 -2 – 1450 MT Press Mfc.: Yejing Force: 1450 T Type: RH Press Built: 2019 Billet: dia. 152 x 800 mm Auxiliary Built: ...
Specifications Maximum pressure: 65 tons Pressing force: 84 tons/m² Duct cross-section: 1000 x 750 mm Bale weight: do 550 kg Power supply: 400 V/ 45 kW Year of construction: 2011 Number of ties: 4 vertical Dimensions of the tailgate: 1400 x 920 mm Weight: approx. 13 tones Bale tying: automatic
Hydraulic press manufactured in 2018. This Baykal APHS 31200 features a press force of 200 t and a bending length of 3,100 mm. With a maximum stroke of approximately 260 mm, it is designed for efficient bending operations. If you are looking to get high-quality bending capabilities, consider the Baykal APHS 31200 hydraulic press we have for sale. Contact us for further details.
Key data: 200 mm
used press brake Trumpf TruBend V200 + BendMaster 60 Year of construction 2004 Pressing force max: 2000kN Stroke max: 365 mm Operating pressure max:340 bar 1 piece B0401A0009 = BendMaster 60 1 piece B0106A0073 = TRB V200-6A 1 piece of protective housing incl. lighting 1 piece of BendMaster roadway 14 meters in 2 meter segments 1 piece of system control system trump
Power supply: 380V, frequency: 50Hz, rated current: 25A, backup fuse: 35A, control voltage: 220V. Documentation available. Inspection possible by arrangement.
Pressing force: 63kN, stroke: 300mm, motor power: 7.5kW, on-site inspection is possible.
This 6-axis TRUMPF TrumaBend V 850 S was manufactured in 2004. It features a press force of 850 kN and a maximum stroke of 445 mm. The machine is equipped with a 5-axis CNC backgauge system and hydraulic tool clamping for enhanced precision. If you are looking to get high-quality bending capabilities, consider the TRUMPF TrumaBend V 850 S press brake we have for sale. Contact us for further details.
25,000 LITRE KÖNIG & GÜNTHER STORAGE TANK / SPARKLING WINE PRESSURE TANK / PRESSURE TANK / 8 BAR, WITH AGITATOR PROPELLER, HORIZONTAL, ROUND, MADE OF STEEL https://eurolux.de/product/24-0563euba-25000-liter-konig-gunther-lager tank-sektdrucktank-drucktank-8-bar-mit-ruhrwerkspropeller-liegend-rund -aus-stahl KK UNI-RILL Specifications Cylinder wall thickness 12.3 mm Manufacturer: König & Günther Wall thickness floor 12.6 mm Surface coated on the inside, food-safe Surface painted on the outside Length 7100 mm Volume 25000 L Steel as a material Diameter 2250 mm Cylinder length 6000 mm Operating pressure 8 bar Agitator Propeller Stirrer Horizontal design Last Use Food Technical Documentation Yes Tank crown: 2 crane eyelets Flange connection 50 mm Front (horizontal tanks): Manhole oval Agitator propeller complete champagne pressure fitting wi ...
Pressure plate stacker Grafoteam PST 26 C; arm length 650mm; suitable for Heidelberg Suprasetter A52-74; optionally with stop interface for Heidelberg Suprasetter A52-74. Plate stacker Grafoteam PST 26 C; arm lenght 650mm; used for Heidelberg Suprasetter A52-74; for option with stop-interface for Heidelberg Suprasetter A52-74.
Key data: 10 t, 300 mm, 300 mm
more info on request
Supply voltage: 1~ 230V AC, rated current: 16A, mains frequency: 50Hz, connected load: 0.64kA, CE marking. On-site inspection is possible.
This hydraulic press manufactured in 2020 features a pressing force of 250 t and a working length of 3,100 mm. It is equipped with an ESA AUTOMOTION S640 touch screen CNC control and an electronic color graphical programmer. If you are looking to get high-quality pressing capabilities, consider the GILARDI Italy 3.25 machine we have for sale. Contact us for further details.
AEROCAP PRO – professional low-pressure sandblasting machine, 17 litres The AEROCAP PRO is a professional mobile low-pressure blasting machine for regular and intensive blasting work on wood, metal, stone and technical components. The machine is designed for commercial use and combines a 17-liter abrasive tank with professional air treatment, automatic start and stop control and wear-resistant tungsten components. TECHNICAL DATA • Model: AEROCAP PRO • Abrasive container: 17 litres • Container bottom: conical • Dimensions: 97 × 34 × 33 cm • Weight: 64 kg • Blasting hose: 10 m, removable • Control: automatic start & stop system • Air treatment: professional compressed air dehumidifier • Pressure gauge to control working pressure • Nozzle: 1 tungsten nozzle in selected size • Nozzle range: 2 to 6.5 mm depending on configuration • Venturi tu ...
Eccentric press vineyard type AR160 tons With protective shield. YOC 1971 2 rotational speeds via mechanical gearbox Switchable. Central lubrication. Low-wear steep-threaded coupling. Table dimensions : 800x1000 mm Visits : possible at any time. Total weight approx. 10.5 tons
Resato HBU-B160 Gas High Pressure Workshop Testing System The oil and gas industry is all about the extraction of crude oil and natural gas. One of the challenges is to make the best use of the assets to produce more from the available resources. Various high-pressure applications can contribute to this. Pressure tests guarantee the quality and safety of components for oil and gas production. By injecting a chemical liquid, the well is stimulated. With the controller, high-pressure systems control and regulate back pressure and liquids. In this way, oil and gas can be extracted more safely. Manufacturer: Resato HBU Test System Type: HBU-B160 Max. pressure: 200bar Max. Capacity: 1570cc/ Max. pressure: 7 bar 2 x Gas Bottle Cage 3 x gas cylinder trolley Digital control panel is missing More items - new and used - can be found in our shop! International shipping costs on ...
Food Tools CP-1H half sheet product press Serial: 6341 2021, crumb pressing machine is designed to press and pack crumbs inot the bottom of a half sheet pan quickly and with consistent pressure, up to 360 products per hour, 280mm diameter press
New Part number: 526 070 12 01 EX52607300010 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list.
Stationary high-pressure pump unit Hammelmann HDP 77 on base frame. Similar but no Kamat, Uraca, Woma. Pump Type: HDP 77 Operating pressure: 330 bar Flow rate: 59 l/min. Drive speed: 1500 rpm. Drive power: 37 kW with Siemens 1LA6223-4AA60 electric motor 45 kW with pressure regulating valve, Fzhoqck with safety valve, with oil cooling system. Dimensions LxWxH: approx. 1,450x750x1,150 mm Weight: approx. 600 kg Year of construction: 2019 Condition: In good used condition.
This 3-axis FERMAT CTOF 80/2500 CNC was manufactured in 2006. It features a press force of 80 tons and a maximum bending length of 2500 mm. If you are looking to get high-quality bending capabilities, consider the FERMAT CTOF 80/2500 CNC press brake we have for sale. Contact us for further details.
Dirinler CD/PC 600 H - Eccentric Press - incl. tools & accessories - Built in 1990 Specification - Capacity: 60 t - Stroke rate: 52 rpm - Plunger adjustment: 80 mm - Table dimensions: 750 x 480 mm - Plunger area: 360 x 250 mm - Table recess: Ø 170 mm - Projection: 250 mm - Engine speed: 1400 rpm - Motor power: 4 kW - Operating voltage: 400 V - Machine dimensions WxHxD: 950 x 2500 x 1900 mm - Dimensions control cabinet WxHxD: 60 x 115 x 35 mm - Weight: approx. 4000 kg
Press brake manufactured in 2022. This DENER DDS 2090 features a bending length of 900 mm and a pressing force of 20 tons. The machine is practically unused and comes complete with tooling. If you are looking to get high-quality bending capabilities, consider the DENER DDS 2090 press brake we have for sale. Contact us for further details.
Working height 900mm Nominal width 1300mm Effective working width 1270mm Rolling pressure force max 40kN Passage height max 120mm Feed transport 6-50 m/min stepless/frequency controlled Plate width min 200mm Plate length min 1000mm Plate thickness min 3mm Power supply 2,2kW Drive power height adjustment 0,55 kW With single tempering device STW 180/1-18-30-N1.1
maximum number of results exceeded
please refine your search
