We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,233 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
new
Overhaul year 2018 Year of manufacture 2010 Saw blades carbide 500 mm Saw motor power 7,5 KW Speed saw motor 2000-38000 min-1 Cutting speed blade 3100-6000 mm / min Saw blade feed adjustable 0-40 mm / s Working range 90 ° Max: 460 x 50 mm Supply length Pneumatic: Single stroke: Max 300 mm Servo controlled: Single stroke: Max 300 mm Multiple Hub: maximum 9999 mm Nachschubgeschw. Servo-controlled replenishment unit 300 mm / s Compressed air connection of be 6 bar Gewicht(Saege)CA.: 1000 kg Dimensions LxBxH(Saege)ca.: 2100mm x2000mm x1600mm Hydraulikagregat) approx.: 900 mm x600mm x800mm Technical description Pressta Eisele Profilma 540 retrofit Pressta Eisele Profilma 540 retrofit Fully automatic high-speed sawing machine for non-ferrous metals and plastics The machine is both technically and optically after completed retrofit in mint condition. The machine ...
used
Manufacturer: Pressta Eisele Type: 501 angle punch Overhaul year: 2020 Built in 2010 Saw blade carbide: 500 mm Drive power saw motor: 5.5 KW Speed Saw Motor: 2860 min-1 Cutting speed Saw blade: 4500 m/min Saw blade feed: infinitely adjustable 0-70 mm/s Tool area 90 max approx.: 20 x 250 mm Punching cylinder: 1 pcs vertical top diameter 100 mm ,1st st horizontal front diameter 100 mm Punching force power: 4.0 KW Pressure max. 280 bar Pressure in KN at 280 bar approx.: 210 KN Volume flow at 280 bar approx.: 6.8 L/ min Pressure in KN at 200 bar approx.: 150 KN Volume flow at 200 bar approx.: 9.5 L/ min Supply length pneumatic: single stroke max. 600 mm Servo controlled: single stroke max. 600 mm Multiple stroke max. 9999mm Replenishment. servo-controlled replenishment unit max. 500 mm/s Compressed air connection on the side: 6 bar Weight (s ...
used
Hydropneumatic functioning Punching power: 50 kN Height: 140 mm
used
Manufacturer: Tox Pressotechnik Available pieces: 2 Models:CRS 03.226 and CRS 03.225 Serial number: 403484.2 and 403482.1 Weight: 90 kg Pressing force: 50 kN
new
: 50 mm roll diameter: 150 mm revolutions per minute: 10 U/min voltage: 400 V / 50 V adjustment movement hydraulic up to: 120 mm motor speed: 1400 U/min total power requirement: 1,5 kW weight of the machine ca.: 430 kg dimensions of the machine ca.: 1200 x 800 x 1750 mm Horizontal and vertical position, optionally two or three driven rollers, standard roller set, lateral guide rollers, foot pedal with safety button, according to CE, operating instructions, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: 50 mm roll diameter: 150 mm revolutions per minute: 10 U/min adjustments: 120 mm total power requirement: 1,5 kW weight of the machine ca.: 430 kg dimensions of the machine ca.: 1,2 x 0,8 x 1,75 mm The PB 50-3 H is a hydraulic profile bending machine: we produce thisprofilebender in Europe and deliver it directly from our stock. This hydraulic profile bending machine has a shaft diameter of 50 mm and 3 driven rolls. It is easy to switch between working with two or three driven rolls via the gearshift on the side of the machine. Operation of the profile bender is done by a foot pedal and with the pedals you choose the turning direction of the rolls. Our PB 50-3 H has a handpump to adjust the position of the upper / centre roll with hydraulics. The position of this upper roll can be read out on a scale and on the digital display (0,1 mm). Furthermore, our Profi Bend machines can work in ...
new
: 50 mm roll diameter: 148 mm revolutions per minute: 13,6/27,2 U/min total power requirement: 1/1,4 kW weight of the machine ca.: 420 kg dimensions of the machine ca.: 800x920x1450 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
height of profile: 60 mm : 60 weight of the machine ca.: 188 kg dimensions of the machine ca.: 0,85 x 0,45 x 1,25 m foot switch: - Fabr.-No.: 292539 - pneumatic clamping head The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Pneumatic punching machine make PRESSTA EISELE type KST 120Machine -No: 5161 built in 1991Technical specifications:Ram stroke: 40 mmRam force: 60 kNInstallation height tools: 250 mmProjection: 110 mmTable area: 200 x 150 mmPower transmission: 10Dimensions: 280 x 1480 x 425 mmWeight approx: 140 kgwith- underframe- 5 punching toolsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Cutter diameter: 250 mm notching width: 400 mm notching depth: 85 mm profile height: 150 mm Feed length: 500 mm Stop between 20° - 90° - 20° Pneumatic workpiece clamps Minimum quantity spraying device Hydropneumatic feed via foot switch Weight: approx. 350 kg
used
GEA Courtoy R 090/18 rotary tablet press with electrical cabinet R090XT13 Number of positions / stations: 18 Punch type: EU D Max. compression force: 100 kN Max. precompression force: 10 kN Production speed: 15,900 - 79,200 tablets / hour. ? Max. tablet diameter: 25 mm Outer diameter of dies: 56 mm Die height: 23.81 mm ? Punch body diameter: 25.35 mm Height of the press: 1955 mm Net weight: 1800 Kg Full technical file. Feeding device / Loading hopper / Discharge chute / Allen Bradley control system. Small size. Equipment in excellent condition and low operating hours.
used
Offer 23168 Specifications: - Notching options + mitres in 3 levels - right-angled, single-sided + two-sided + three-sided oblique. - Can be used as a slate-cutting cut-off saw - Pneumatic profile clamping machining with semi-automatic sawing units - Saw blade dimensions - vertical 500 x 3.5 x 40 mm positive - horizontal 500 x 3.5 x 40 mm negative - Notching width / notching height at 90° 300 / 285 mm - vertical saw blade 60° - 90° - 25° mot. Positioning with digital display - Swivel range saw blade horiz. With the vert. Saw blade - 45° - 90° - 45°, motorized positioning with digital displays - Notching height adjustment with digital displays - Profile stop shoulder manually swivel 30° - 90° - 45° - pneumatic coolant spraying device - Air connection 6 bar - Drive 400 V / 2 x 3 kW - Space requirement approx. W 2400 x H 2000 / D 1400 mm - We ...
used
Manufacturer : Fette Model: Perfecta 2000 Year of construction : 1985 Type : tablet press Number of pressing stations: 43 Maximum compression force: 80 KN Maximum pre-compression force: 15 KN Maximum tablet diameter: 13 mm Maximum tablet thickness: 8.5 mm Maximum hourly throughput: 258,000 units / h Maximum filling height: 18 mm Die diameter: 24 mm Die height: 22.22 mm Punch body diameter: 19 mm Punch length: 133.6 Punch insertion depth into die: 2-6 mm Format sets available : new and used Spare parts available
used
Cutter diameter: 250 mm Max. notch width: 250 mm Max. notching depth: 85 mm Max. profile height: 150 mm Feed length: 500 mm Stop between 20° - 90° - 20° Pneumatic workpiece clamps Minimum quantity spraying device Manual feed Weight: approx. 150 kg
used
Printing machine, embossing machine, stamping machine -without function, control: defective -pneumatic-hydraulic press - Stroke: 50mm - clearance between columns: 850 mm -Table surface: 400 x 370 mm -Dimensions: 1285/590/H1820 mm -Weight: 416 kg
used
Pressing force: 160kN, stroke speed: 200-1000/min, with automatic handling/ infeed and documentation.
used
Notching width: max. 200 mm Notching depth: 40 mm Profile height: max. 100 mm Vise span: 100 mm Feed length: max. 500 mm Speed: 2,800 rpm Electric milling feed by actuating the foot switch Profile tension by means of infinitely swivelling vice.
used
Perfecta 1000 rotary tablet press with electrical cabinet Manufacturer: Fette Model: Perfecta 1000 / P1000 Year : 1985 Number of pressing stations: 22 Maximum compression force: 80 kN Maximum pre-compression force: 20 kN Maximum tablet diameter: 25 mm Maximum tablet thickness: 10.5 mm Maximum hourly throughput: 72,600 tablets Maximum filling height: 22 mm Pitch diameter: 315 mm Die plate speed: 15-55 rpm Punch shape: EU 1 Die diameter: 38.1 mm Die height: 23.8 mm Punch body diameter: 25.4 mm Upper punch length: 133.6 mm Length of lower punches: 133.6 mm Depth of punch insertion into die: 2 - 6 mm Machine footprint: 1030 x 1090 mm Net weight: 1800 kg Documentation available
used
Machine for cutting, cutting, folding and extrusion of sheet metal Projection: 1250 mm Number of beats/min: 560/1120/2240 beats per minute Stroke height: 2 – 10 mm Cutting speed: 0.5 – 8 m/min Max. sheet thickness: 9 mm Power supply: 380/50 V/Hz Power: 3.9KW Weight: 1.72 t Dimensions: 2.3 x 0.9 x 1.6 m
used
Year: 2013 - technically efficient, ready to work - after full service - two engines: 3 kW - cutting disc diameter: 2x Ø400 mm - maximum profile height: 250 mm - maximum dimensions of the 90° cutout: 135mm x 135mm - vertical disc manually adjustable in the range of 70° - 90° - 30° - material stop bar manually adjusted in the range of 30° - 90° - 30° - manual adjustment of the depth and height of the cutout
used
Key data: 300 mm
Cutter diameter: 300 mm Max. notching width: 350 mm Max. notching depth: 110 mm Max. profile height: 150 mm Feed length: 500 mm Stop between 20° - 90° - 20° Pneumatic Workpiece Clamps Minimum Quantity Spraying Device Manual feed Weight: approx. 280 kg
used
General SKU300U589 LocationBarneveld MakeKorsch TypeEK 0 No.K0000094 Year of construction2001 Main Features Tablet Diameter20 mm Specified Features - Single stroke tablet press MaterialStainless steel 1.4301 (304), Stainless steel 1.4435 (316L), Tool steel 1.2721 Single stroke tablet presscheck Tablet diametermax. 20 mm Filling depth0-20 mm Die diameter20 mm With filling shoecheck With hoppercheck Capacitymax. 3600 st. With motor0,55 kW, 220/380Volt With variable speed drive10-60 rpm Information Mounted on frameStainless steel cabinet With switchcheck With switchgearcheck Weight180 kg CEcheck Floorspace0,74x0,46 m Total height1,90m Extra Specifications- with various press tooling - compression force indication Single stroke tablet pressesGeneric medicinesKorsch PressenPresses > Single stroke tablet pressesIndustries > Pharmaceutical > Generic medicinesBrand > ...
used
General SKU300U588 LocationBarneveld MakeKorsch TypeXL 100-8-EUD No.K1510018 Year of construction2001 Main Features Tablet Diameter25 mm Material Specified Features - Rotating tablet press Rotating tablet presscheck Number of stations:1 With punching dies8-10-12 With key on punching diescheck Tablet sizes13-16-25 mm Filling depth0-6/6 mm: 4-10/10 mm: 10-16/16 mm With motorcheck (2,2kW, 220-240/380-415 Volt, 1400 rpm) With frequency controllercheck (20-120, 20-120, 20-60 rpm) Capacity29.000-72.000-86.400 pc/h With hoppercheck Information Mounted on framecheck With switchcheck With switchgearcheck Weight960 kg CEcheck Floorspace1,6x0,7 m Total height2 mRotating tablet pressesKorsch PressenPresses > Rotating tablet pressesBrand > Korsch Pressen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for s ...
used
Eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press -Manufacturer: BBT Presses, single column eccentric press type ER 25 with safety cage -Press guard: Nilson -Clutch: pneumatic -Pressure capacity: 25 tons -Stroke rate: 50/100 strokes/min -Stroke: adjustable 12 - 80 mm -Table size: 520 x 360 mm -Projection: 190 mm -Punching fixture: Ø 30 mm -Insert height: 310 mm -Central lubrication -Dimensions: 1180/800/H1820 mm -Weight: 1418 kg
used
Pneum. Single Column C-Form Press Fabr. TOX Pressotechnik Type S50.4.80.6 / PC 50Year of construction 1989Pressing force: 440 kN / 44 tTotal stroke: 80 mmof which power stroke: 6.0 mmCompressed air connection: 6.0 barTable size: 596 x 496 mmInstallation height: 500 mmDiarrhea hole: 120 mmWith- Press frame PC 50- Power package S50.4.80.6- 2-column guided ram plate- Underframe U 50- protective cover SH 50- Press control ST 03 3/4 - Setup mode = additional deviceused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
PRESS FOR PRODUCTION ALUMINIUM TRAYS FOR ALIMENTARY USE COMPLETE WITH DOUBLE IMPRESSION MOULD-1100 CC. COMPOSED OF: A LUBRICATION UNIT 4-COLUMN MOLDING UNIT TOW-SCRAP CONTROL PANEL. 55 STROKES/MINUTE DEPENDING ON THE MOULDS. PASS COLUMNS FOR MOULDS UP TO 800 MM
new
Tool cases for press-fit machines Tool holder type Haeger (compatible) 22 press-in tools for press-fit-in contact-press-persefesters Manufacturer: PressOne - Made in Finland
new
pressure: 100 t distance between columns: 1500 mm stroke: 380 mm working feed: 2,47 mm/sec : 700 adjustment of press crosshead: 1500 mm slide adjustment -horizontal: 1740 mm feed speeds: 7,54 mm/sec return speed: 9,06 mm/sec Pressure power: 258 bar table-size: 1740 x 1396 mm total power requirement: 2,2 kW weight of the machine ca.: 2060 kg dimensions of the machine ca.: 1,74 x 2,07 x 2,04 m This 100 ton straightening press has a manually movable portal and is exclusively made in the Netherlands. Thanks to the movable portal and cylinder you can easily reach every point of the ‘to be pressed’ surface. The design of this portal press makes it possible to place heavy material on the large working table with a crane and to slide the portal over the material when the pressing starts. The quality of these hydraulic straightening presses is very high. Furthermore, the hydraulic unit is equ ...
new
pressure: 300 t distance between columns: 2560 mm stroke: 400 mm working feed: 3,8 mm/sec piston stroke: 300 mm : 700 mm adjustment of press crosshead: 2000 mm slide adjustment -horizontal: 3000 mm tank capacity: min 30 l feed speeds: 9 mm/min pressing speed: 2 mm/sec return speed: 15 mm/sec total power requirement: 10 kW weight of the machine ca.: 13 t dimensions of the machine ca.: 3,5 x 3,05 x 2,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 100 t distance between columns: 1100 mm stroke: 380 mm working feed: 2,47 mm/sec : 950 adjustment of press crosshead: 1100 mm slide adjustment -horizontal: 2150 mm tank capacity: min 30 l feed speeds: 7,54 mm/sec return speed: 9,06 mm/sec Pressure power: 258 bar table-size: 1740 x 996 mm total power requirement: 2,2 kW weight of the machine ca.: 1,65 t dimensions of the machine ca.: 1,1 x 0,7 x 0,72 m This Profi Press portal press with a manually movable portal is made in the Netherlands and has a 160 tons capacity. The quality of these hydraulic portal presses is very high and the operation of the press is similar to the operation of our well-known motorised workshop presses (they are made in the same factory). Please find the technical specifications of this type of Profi Press below and do not hesitate to request a free quotation or to contact us for any further information. ...
new
pressure: 10 t stroke: 30 mm table surface area: 105 x 366 mm distance between columns: 366 mm column daylight: 70 mm : 32 mm total power requirement: - kW weight of the machine ca.: 55 kg dimensions of the machine ca.: 500 x 700 x 1030 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 15 t stroke: 160 mm press capacity: 147,15 kn Pressure power: 382,2 bar column daylight: 555 mm : 80 tank capacity: 1,5 l distance between columns: 134 mm weight of the machine ca.: 134 kg dimensions of the machine ca.: 825 x 600 x 1880 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 300 t stroke: 450 mm throat: 450 mm work speed: 2,1 m/min ajustment speed: 10 mm/sec return speed: 16 mm/sec pressure: 320 bar diameter of piston: 60 mm opening stroke: 900 mm table-size: hinten / back 2500 x 750 mm Table dimensions: Main 750 x 750 mm total power requirement: 7,5 kW weight of the machine ca.: 15,3 t dimensions of the machine ca.: 3,35 x 2,5 x 1,6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 160 t stroke: 400 mm tank capacity: 51 l pressing speed: 2,40 mm/sec column daylight: 1500 mm feed speeds: 7,48 mm/sec return speed: 9,35 mm/sec Pressure power: 255 bar engine output: 3,0 kW speeds:: 2 : 280 mm range L-W-H: 2125 x 935 x 2270 mm weight of the machine ca.: 1430 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 100 t stroke: 380 mm tank capacity: 54 l pressing speed: 2,47 mm/sec column daylight: 750 mm feed speeds: 7,54 mm/sec return speed: 9,06 mm/sec Pressure power: 258 bar engine output: 2,2 kW speeds:: 2 : 220 mm range L-W-H: 1665 x 865 x 2140 mm weight of the machine ca.: 970 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 220 t distance between columns: 2065 mm stroke: 400 mm working feed: 3,8 mm/sec piston stroke: 300 mm : 700 mm adjustment of press crosshead: 1500 mm slide adjustment -horizontal: 2500 mm tank capacity: min 30 l feed speeds: 13 mm/sec pressing speed: 2,7 mm/sec return speed: 24 mm/sec total power requirement: 10 kW weight of the machine ca.: 13 t dimensions of the machine ca.: 3,5 x 3,05 x 2,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 100 t stroke: 380 mm tank capacity: 54 l pressing speed: 2,47 mm/sec column daylight: 1500 mm feed speeds: 7,54 mm/sec return speed: 9,06 mm/sec Pressure power: 258 bar engine output: 2,2 kW speeds:: 2 : 220 mm range L-W-H: 2065 x 865 x 2080 mm weight of the machine ca.: 1145 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 150 t stroke: 450 mm throat: 350 mm work speed: 2 m/min ajustment speed: 10 mm/sec return speed: 16 mm/sec pressure: 320 bar diameter of piston: 50 mm opening stroke: 700 mm table-size: hinten / back 2000 x 500 mm Table dimensions: Main500 x 500 mm total power requirement: 4 kW weight of the machine ca.: 6,7 t dimensions of the machine ca.: 2,95 x 2,0 x 850 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 300 t stroke: 500 mm tank capacity: 70 l pressing speed: 1,74 mm/sec column daylight: 1750 mm feed speeds: 4,9 mm/sec return speed: 5,67 mm/sec Pressure power: 260 bar engine output: 5,5 kW speeds:: 2 : 325 mm range L-W-H: 1925 x 975 x 2270 mm weight of the machine ca.: 2320 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 50 t : 490,5 kN Pressure power: 399,5 bar : 140 mm working width: 1100 mm Dimensions (HxWxD): 2050 x 760x 1100 mm column daylight: 750 mm distance between columns: 300 mm piston stroke: 160 mm weight of the machine ca.: 309 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 30 t stroke: 160 mm table surface area: 560 x 255 mm table length: 695 mm table width: 230 mm Pressure power: 374,6 bar piston stroke: 160 mm tank capacity: 1,5 l column daylight: 560 mm diameter of piston: 110 mm weight of the machine ca.: 175 t dimensions of the machine ca.: 830 x 640 x 2030 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 220 t stroke: 450 mm throat: 375 mm work speed: 2,2 m/min ajustment speed: 10 mm/sec return speed: 18 mm/sec pressure: 320 bar diameter of piston: 60 mm opening stroke: 800 mm table-size: hinten / back 2500 x 600 mm Table dimensions: Main 600 x 600 mm total power requirement: 5,5 kW weight of the machine ca.: 12,15 t dimensions of the machine ca.: 3,25 x 2,5 x 0,90 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 150 t distance between columns: 1565 mm stroke: 450 mm : 700 mm adjustment of press crosshead: 1100 mm slide adjustment -horizontal: 2150 mm feed speeds: 9,0 mm/sec pressing speed: 2,0 mm/sec return speed: 15,4 mm/sec Pressure power: 320 bar table-size: 1550 x 3000 mm table height: 600 mm total power requirement: 15,4 kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: 3250 x 2500 x 2550 m This 150 ton gantry press is eminently suitable for straightening large and heavy structures and sheets. These Profi Press portal presses have a movable frame and a movable cylinder. Thanks to these features you have an easy access the different pressing and straightening points of the material. The longitudinal displacement of the frame is carried out by a frequency inverter and cogged belt to ensure precise slides. The lateral movement of the cylinder / headstock is motorised ...
new
pressure: 200 t stroke: 400 mm tank capacity: 51 l pressing speed: 1,84 mm/sec column daylight: 1300 mm feed speeds: 5,73 mm/sec return speed: 7,08 mm/sec Pressure power: 243 bar engine output: 3,0 kW speeds:: 2 : 325 mm range L-W-H: 1925 x 975 x 2270 mm weight of the machine ca.: 1690 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 160 t stroke: 400 mm tank capacity: 51 l pressing speed: 2,40 mm/sec column daylight: 1100 mm feed speeds: 7,48 mm/sec return speed: 9,35 mm/sec Pressure power: 255 bar engine output: 3,0 kW speeds:: 2 : 280 mm range L-W-H: 1725 x 935 x 2200 mm weight of the machine ca.: 1195 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 160 t distance between columns: 1100 / 1500 (Option) mm stroke: 400 mm working feed: 2,4 mm/sec : 700 slide adjustment -horizontal: 2150 mm tank capacity: min 30 l feed speeds: 7,48 mm/sec pressing speed: 2,4 mm/sec return speed: 9,35 mm/sec Pressure power: 255 bar table-size: 1740 x 996 mm total power requirement: 3 kW weight of the machine ca.: 2185 t dimensions of the machine ca.: 1,74 x 1,73 x 2,185 m This Profi Press portal press with a manually movable portal is made in the Netherlands and has a 160 tons capacity. The quality of these hydraulic portal presses is very high and the operation of the press is similar to the operation of our well-known motorised workshop presses (they are made in the same factory). Please find the technical specifications of this type of Profi Press below and do not hesitate to request a free quotation or to contact us for any further informat ...
new
pressure: 30 t stroke: 380 mm tank capacity: 51 l column daylight: 750 mm feed speeds: 15 mm/sec return speed: 18,11 mm/sec turning speeds: 3000 U/min Pressure power: 221 bar engine output: 1,5 kW speeds:: 2 : 130 mm weight of the machine ca.: 385 kg dimensions of the machine ca.: 2120 x 695 x 1315 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
C - Frame Pneumatic, Hydraulic Press Pressing force: max. 75 to. Control: STE 328-89-1 1/2'' complete. Table area: 996 x 695 mm. Installation height: max. 600 mm. Total stroke: 150 mm. Force stroke: 10 mm. Incl. 2 - hand control panel, protective device and documentation. Weight: 5700 kg. Abm. WxDxH: approx. 1300 x 1700 x 3700 mm. Good operational condition. The machine can be inspected and demonstrated under power in consultation and is immediately available. Please also note my other entries.
new
pressure: 60 t stroke: 380 mm tank capacity: 51 l pressing speed: 2,07 mm/sec column daylight: 750 mm feed speeds: 8,69 mm/sec return speed: 10,79 mm/sec Pressure power: 259 bar engine output: 1,5 kW speeds:: 2 : 170 mm weight of the machine ca.: 540 kg dimensions of the machine ca.: 2120 x 695 x 1315 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 160 t distance between columns: 1500 mm stroke: 400 mm working feed: 2,4 mm/sec : 700 slide adjustment -horizontal: 2150 mm tank capacity: min 30 l feed speeds: 7,48 mm/sec pressing speed: 2,4 mm/sec return speed: 9,35 mm/sec Pressure power: 255 bar table-size: 1740 x 996 mm total power requirement: 3 kW weight of the machine ca.: 2,65 t dimensions of the machine ca.: 1,74 x 1,73 x 2,185 m This Profi Press portal press with a manually movable portal is made in the Netherlands and has a 160 tons capacity. The quality of these hydraulic portal presses is very high and the operation of the press is similar to the operation of our well-known motorised workshop presses (they are made in the same factory). Please find the technical specifications of this type of Profi Press below and do not hesitate to request a free quotation or to contact us for any further information. The data ...