press line used for sale

Auction-ID: A1-51062-126

Suitable for dewatering organic waste, and separating solids and liquids into waste streams. Trenn-Tec Type: S15, stainless steel food-grade version. History and documentation available. Auction-ID: A1-42990-203

Welch Allyn DuraShock DS54 – Blood Pressure Monitor, Never Used Manufacturer: Welch Allyn Model: DuraShock DS54 Condition: New, Never Used The DS54 features an air discharge valve with traditional pressure relief screw. By creating a gearless design, Welch Allyn has developed with the DuraShock™ a pressure gauge with few moving parts. Shock-resistant and lighter than traditional pressure gauges. Until now, a blood pressure monitor that fell to the ground required calibration or replacement. However, the DuraShock Blood Pressure Monitor™ can fall up to 76 cm high on a hard surface and still remain calibrated. It is the only pressure gauge that can meet the requirements of AAMI shock tests. (Association for the Advancement of Medical Instrumentation). In the traditional design of an aneroid blood pressure monitor, a delicate set of gears and springs converts and amplifies the ...

Welch Allyn DuraShock DS54 – Blood Pressure Monitor, Never Used Manufacturer: Welch Allyn Model: DuraShock DS54 Condition: New, Never Used The DS54 features an air discharge valve with traditional pressure relief screw. By creating a gearless design, Welch Allyn has developed with the DuraShock™ a pressure gauge with few moving parts. Shock-resistant and lighter than traditional pressure gauges. Until now, a blood pressure monitor that fell to the ground required calibration or replacement. However, the DuraShock Blood Pressure Monitor™ can fall up to 76 cm high on a hard surface and still remain calibrated. It is the only pressure gauge that can meet the requirements of AAMI shock tests. (Association for the Advancement of Medical Instrumentation). In the traditional design of an aneroid blood pressure monitor, a delicate set of gears and springs converts and amplifies the ...

Professional cold water high-pressure cleaner. Adjustable working pressure: 30 - 180 bar. Auction-ID: A1-42990-50

Welch Allyn DuraShock 767 Series – Stand Blood Pressure Monitor, Never Used Manufacturer: Welch Allyn Model: DuraShock 767 Condition: New, Never Used This stand blood pressure monitor is part of the WELCH ALLYN DuraShock range designed specifically to withstand shocks. This equipment is ideal in a medical environment requiring solid equipment. The WELCH ALLYN DuraShock stand model offers many advantages: Accurate to 3 mmHg. Works with the precision of quartz. Heat-treated diaphragm to maintain calibration. Reliable and resistant calibration. Wide screen of 15 cm on each side. Laser engraved screen. Reinforced screen to reduce parallax. Spiral hose for more ease. Its lifespan is longer than most conventional blood pressure monitors. Basket to store the cuff. Stand model, adjustable in height and rotatable 360°. With wheels. Latex-free. Jewelry movement for better re ...

Auction-ID: A1-51062-43

Welch Allyn DuraShock 767 Series – Stand Blood Pressure Monitor, Never Used Manufacturer: Welch Allyn Model: DuraShock 767 Condition: New, Never Used This stand blood pressure monitor is part of the WELCH ALLYN DuraShock range designed specifically to withstand shocks. This equipment is ideal in a medical environment requiring solid equipment. The WELCH ALLYN DuraShock stand model offers many advantages: Accurate to 3 mmHg. Works with the precision of quartz. Heat-treated diaphragm to maintain calibration. Reliable and resistant calibration. Wide screen of 15 cm on each side. Laser engraved screen. Reinforced screen to reduce parallax. Spiral hose for more ease. Its lifespan is longer than most conventional blood pressure monitors. Basket to store the cuff. Stand model, adjustable in height and rotatable 360°. With wheels. Latex-free. Jewelry movement for better re ...

Welch Allyn DuraShock 767 Series – Stand Blood Pressure Monitor, Never Used Manufacturer: Welch Allyn Model: DuraShock 767 Condition: New, Never Used This stand blood pressure monitor is part of the WELCH ALLYN DuraShock range designed specifically to withstand shocks. This equipment is ideal in a medical environment requiring solid equipment. The WELCH ALLYN DuraShock stand model offers many advantages: Accurate to 3 mmHg. Works with the precision of quartz. Heat-treated diaphragm to maintain calibration. Reliable and resistant calibration. Wide screen of 15 cm on each side. Laser engraved screen. Reinforced screen to reduce parallax. Spiral hose for more ease. Its lifespan is longer than most conventional blood pressure monitors. Basket to store the cuff. Stand model, adjustable in height and rotatable 360°. With wheels. Latex-free. Jewelry movement for better re ...

Welch Allyn DuraShock DS54 – Blood Pressure Monitor, Never Used Manufacturer: Welch Allyn Model: DuraShock DS54 Condition: New, Never Used The DS54 features an air discharge valve with traditional pressure relief screw. By creating a gearless design, Welch Allyn has developed with the DuraShock™ a pressure gauge with few moving parts. Shock-resistant and lighter than traditional pressure gauges. Until now, a blood pressure monitor that fell to the ground required calibration or replacement. However, the DuraShock Blood Pressure Monitor™ can fall up to 76 cm high on a hard surface and still remain calibrated. It is the only pressure gauge that can meet the requirements of AAMI shock tests. (Association for the Advancement of Medical Instrumentation). In the traditional design of an aneroid blood pressure monitor, a delicate set of gears and springs converts and amplifies the ...

Wall-mounted aneroid blood pressure monitor, never used Condition: new, never used Auction-ID: A1-51618-358

pressure: 225 t chamfer lenght: 4050 mm distance between columns: 3550 mm control: CYBELEC Cybtouch 15 total power requirement: 18,5 kW weight of the machine ca.: 18.000 kg dimensions of the machine ca.: 5180x2400x3200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t stroke: 380 mm table surface area: 1740x996 mm daylight between the side columns: 1100 mm work height max.: 720 mm dayligth: 700 mm dayligth: 700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 170 t

Trumpf Press Brake Trumabend V170, 1700KN, Stroke: 365,. L-530cm, W- 240cm, H-300cm, Weight: 18to,

Key data: 170 t

Trumpf Press Brake Trumabend V170, 1700KN, Stroke: 365,. L-530cm, W- 240cm, H-300cm, Weight: 18to,

Key data: 25 t

Automatic straightener, shaft straightener , MAE -25RH, 1996, used Manufacturer: Maschinen- & Apparatebau Götzen GmbH, Germany Connected load: 14.5kva , Dim.: 2.5 x 1.5 x 1.8m, Weight : 5000kg

The machine is in good technical condition; it can be tested by prior arrangement.

The machine is in good technical condition; it can be tested by prior arrangement.

as good as new toggle press, 28 kN , stroke 0 - 12 mm , projection 131 mm

Complete workstation with pneumatic 2-hand release, force 45 kN, max. stroke 60 mm, projection 160 mm

Used Wilo fire extinguishing pressure booster system with vertical, multi-stage high-pressure centrifugal pump, FLA control and diaphragm pressure vessel. Manufacturer: Wilo Type: FLA-1 HELIX V1606/K-01 PN10 Item number: 2534421 Attachment No.: A/50384151-1 Application: Extinguishing water supply Number of pumps: 1 Pump Type: Vertical Multistage High Pressure Centrifugal Pump Nominal power motor: 4 kW Mains connection: 3~400 V / 50 Hz Rated speed: 2,900 rpm Motor Rated Current: 7.4A Maximum operating pressure: 10 bar Media temperature: +3 to +50 °C Ambient temperature: +5 to +40 °C Motor Rating: IP55 Protection class switchgear: IP54 Pump housing: stainless steel Impellers: Stainless steel Pump shaft: stainless steel Sound pressure level according to nameplate: 68 dBA Weight according to system nameplate: 109 kg Equipment: FLA control, diaphragm pressure vessel ...

Qty. 1 Second-hand extrusion press line Mfc.: UBE, Guangdong Kikan, Comatco, Omafu Built: 2014 Stopped: 2025 Extruder force: 6600 MT, 7300 UST Billet dia.: 356 & 457 mm, 14” & 18” Billet length: 610 – 1346 mm Control system by Siemens PLC Scope of supply: Single aluminum rod heating furnace + hot sawing machine Extrusion press Cold bed production line Straightening machine Fully automatic servo traction machine Finished product sawing machine + Aluminum shavings recycling system Mold heating furnace Mold-specific lifting machine 8 individual box molds 2 box-type cover molds heating furnace Aluminum rod stripping machine Pneumatic oil purifier unit for extruder Distribution cabinets of the production line

Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology, Bourdon tube manometer, pressure tester, pressure tester -Manufacturer: Norgren, Manometer 0 - 10 bar / 0-1 MPa, unused, original packaging -Type: Ø 49 mm -Quantity: 1x pressure gauge available -Dimensions: Ø 49 x 49 mm -Weight: 0.1 kg

Spotting press 400 kN RICE TUS 90 OK 40 Working Area: Table 900 x 1280 Column passage 930 x 705 mm Table top 900 x 1280 mm Plunger plate 900 x 1200 mm Installation height 1035 mm Space requirement approx. 3 x 2 x 3.6 m Transport dimensions approx. 4 loading metres, width 2.20 / height 2.80 Weight approx. 8 tons Auction-ID: A7-51643-5

Brand: Kremer Type: KR-4510HW Working pressure: 110 bar Temperature: 30°C to 110°C High-pressure hose: 10 meters of high-pressure hose Equipped with: tank for detergent Boiler: diesel-fired Heat Recovery: 42 kW Capacity: 600 liters per hour Connection: 230 volts Electric power: 3 kW Speed: 2800 rpm Weight: 100 kg Includes: high-pressure gun, high-pressure hose, brass coupling, 4 different spray nozzles and manual Condition: unused, in the original packaging Auction-ID: A3-46115-1354

Additel 681 20 Bar Digital Pressure Gauges; ; Pressure Range: 0 to 20 Bar (300Psi); Accuracy: ± 0.2% FS; Surcharge: 24 Bar; Media: Gas/Liquid (GL); ; Internal reference: FA-1297; Auction-ID: A1-50994-1149

Brand: Kremer Type: 20 meters with reel 20 mtr air hose extendable 2 mtr air supply hose 280 bar working pressure 1/4\" quick fitting 3/8\" hose Delayed roll-in mechanism Auction-ID: A1-40901-291

MATABOSCH H-6 – Hydraulic Vertical Baling Press Manufacturer: J. Matabosch S.A. Model: H-6 Year of Manufacture: 1985 Country of Origin: Spain Condition: Used Technical Specifications Description Specification Manufacturer J. Matabosch S.A. Model H-6 Machine Type Vertical Hydraulic Baling Press Year of Manufacture 1985 Pressing Force 10 Tons Motor Power 2 HP (CV), approx. 1.47 kW Electrical Supply 380 V Drive System Hydraulic Press Configuration Vertical Loading System Front Loading Chamber Hydraulic Cylinder Vertical Operation Manual Hydraulic Controls Bale Ejection To be confirmed Machine Serial Number 2676 Construction Heavy-Duty Steel Frame Manufacturer Location Barcelona, Spain Auction-ID: A1-51509-101

Brand: Kremer Type: KR-7300WH Working pressure: 200 bar Temperature: 30°C to 110°C High-pressure hose: 10 meters of high-pressure hose Equipped with: suction hose for cleaning agent Boiler: diesel-fired Heat Recovery: 58 kW Capacity: 900 liters per hour Connection: 400 volts Electrical power: 7.3 kW Speed: 1450 rpm Weight: 128 kg Includes: high-pressure gun, high-pressure hose, water filter, brass coupling and manual Condition: unused, in the original packaging Auction-ID: A3-46115-1353

garage press Type: Pneumatic-hydraulic workshop press Press force: 20 tons Cylinder stroke: 175 mm Working range: 0 – 910 mm Working width: 535 mm Operation: Pneumatically assisted hydraulic pump (air + hand pump) Frame: Heavy-duty steel H-frame construction with reinforcement plates Cylinder: Large diameter hydraulic cylinder, low working pressure Press stamp: hardened and chrome-plated Work table: height adjustable with support pins Pressure gauge: Integrated pressure gauge for precise force control Safety: pressure relief valve against overload Connection: 1/4\" compressed air connection (4–8 bar) Weight: approx. 100 kg Condition: Unused Auction-ID: A3-46115-1368

AMIS ZBP 500 Industrial Briquetting Press – 30 kW AMIS ZBP 500 industrial briquetting press, designed for compacting suitable residual materials into compact, rectangular briquettes. The machine can be used for the processing of wood residues, sawdust, biomass and other compressible materials. The material is fed to the hydraulic press unit via the storage hopper and screw conveyor. In the press chamber, the material is compressed under high pressure into sturdy briquettes, which significantly reduces the volume and the material can be stored, transported or further processed more easily. The ZBP 500 is suitable for industrial applications and has a capacity of approximately 450 to 500 kg per hour according to the manufacturer's specifications. depending on the material to be processed and the moisture content. Technical data according to manufacturer:  ...

Used REIS 4-column hydraulic press / try-out press. 380 V, 50 Hz, serial no. 02037 visible on plate. Large working area, hydraulic unit and control panel included. Condition as shown in photos; capacity and full specifications to be confirmed. Auction-ID: A1-51509-3

Brand: Kremer Type: 20 meters with reel 20 mtr air hose extendable 2 mtr air supply hose 280 bar working pressure 1/4\" quick fitting 3/8\" hose Delayed roll-in mechanism Auction-ID: A1-40901-553

Mobile pressurised tank set with pump, hoses and accessories. Plate visible: type SCO/50, 50 L, 8 bar, year 2004. Sold as a lot; condition and pressure certification to be checked by buyer. Auction-ID: A1-51509-83

With 50 hp high-pressure pump, ABB 2006 model anthropomorphic robotic arm, 2700 working hours, CE certified, equipped with manuals Auction-ID: A7-51589-2

HSM 18 – Vertical Hydraulic Baling Press Manufacturer: HSM Pressen GmbH, Germany Model: HSM 18 Machine Type: Vertical Hydraulic Baling Press Year of Manufacture: 1981 (identification plate) Condition: Used Technical Specifications Description Specification Manufacturer HSM Pressen GmbH Model HSM 18 Pressing Force 18 Tons Drive System Hydraulic Press Configuration Vertical Loading System Front Loading Door Bale Ejection To be confirmed Compression Chamber Heavy-Duty Steel Construction Electrical Supply To be confirmed Hydraulic Power Unit Integrated Control System Push-Button Controls Safety Mechanical Door Locking System Machine Number 180 071 Year 1981 Inventory Number 644987 Auction-ID: A1-51509-97

SCHULER mechanical eccentric press, approx. 25 ton according to visible plate. Foot pedal and lubrication unit visible. Older machine, condition as shown; safety equipment and operation must be checked before use. Auction-ID: A1-51509-15

pressure:250 t table length:4000 mm table width:3000 mm Controls:SIEMENS SIMATIC C7 PRESS DESIGN:. - frame design : 4 column :. - moving bolster : yes :. PRESS FORCES:. - total force (nominal):250 to PRESS TABLE:. - clamping surface (left-right):4000 mm - clamping surface (front-back):3000 mm - tool weight max.:100000 kg - number of T-slots:12 - distance between T-slots:375 mm - height above floor level:390 mm RAM:. - clamping surface (left-right):4000 mm - clamping surface (front-back):3000 mm - number of T-slots:12 - distance between T-slots:375 mm - stroke:2900 mm - tool weight max.:50000 kg RAM (HYDR. PRESS):. - number of main-cylinders:1 - approximation velocity max.:180 mm/s - working velocity max.:50 mm/s - restoring force of ram:95 to TOOL ASSEMBLY DIMENSIONS:. - distance table - ram max.:2750 mm - distance between columns (H-frame):4100 mm - Free passage be ...

pressure:800 t distance between columns:2900 mm stroke:350 mm Controls:SIEMENS PRESS DESIGN:. - frame design : H-frame :. - Drive type : mechnical :. - openings in uprights : yes :. - number of cushions:0 - opening in table : yes :. - moving bolster : yes :. PRESS FORCES:. - total force (nominal):800 to PRESS TABLE:. - clamping surface (left-right):2800 mm - clamping surface (front-back):2800 mm - rectangular breakthrough (width):2000 mm - rectangular breakthrough (front-back):1800 mm - height above floor level:850 mm RAM:. - clamping surface (left-right):2800 mm - clamping surface (front-back):2800 mm - stroke:350 mm - number of strokes max:55 /min RAM (MECHAN. PRESS):. - ram adjustment:350 mm TOOL ASSEMBLY DIMENSIONS:. - shut height (stroke down, adjustment up):1100 mm - distance between columns (H-frame):2900 mm - Free passage between side columns (width):2560 mm ...

pressure:1000 t table length:4000 mm table width:1600 mm Controls:SIEMENS S7-1500F PRESS DESIGN:. - frame design : Transfer press :. - Drive type : mechnical :. - openings in uprights : yes :. - opening in table : yes :. - moving bolster : yes :. - number of tables:2 PRESS FORCES:. - total force (nominal):1000 to PRESS TABLE:. - clamping surface (left-right):4000 mm - clamping surface (front-back):1600 mm - height above floor level:600 mm - autom. tool clamping device : yes :. RAM:. - stroke:400 mm RAM (MECHAN. PRESS):. - ram adjustment:300 mm - ram adjustment:100 mm - number of strokes min:8 /min - number of strokes max:50 /min - hydraulic overload protection : yes :. TOOL ASSEMBLY DIMENSIONS:. - shut height (stroke down, adjustment up):900 mm - shut height (stroke down, adjustment up):766 mm - distance between columns (H-frame):4250 mm - Free passage between side c ...

pressure:40 t throat:220 mm stroke:8 / 88 mm table pass:ø- abgesetzt 225/200 mm ram head dimension:400 x 250 mm distance table/ram:228 mm stroke adjustable from - to:30 - 140 mm ram adjustment:63 mm thickness of bolster:80 mm no. of strokes:70 Hub/min total power requirement:5,5 kW weight of the machine ca.:2600 kg dimensions of the machine ca.:1100 x 1300 x 2300 mm Documents:vorhanden

pressure:250 t passage width:1280 mm stroke:bis 500 mm total power requirement:47 kW weight of the machine ca.:23 t dimensions of the machine ca.:2200 x 1850 x 4600 mm table surface area:1250 x 1000 mm dayligth:800 mm daylight between the side columns:520 x 750 mm table height above floor:1000 mm Documents: vorhanden

pressure:160 t throat:370 mm stroke:150 mm total power requirement:45 kW weight of the machine ca.:22 t dimensions of the machine ca.:2,75 x 1,85 x x 4,80 m rules for accident prevention:Vorhanden work table::1500 x 700 mm Documents:vorhanden

pressure:063 t throat:250 mm stroke:8 - 100 mm no. of strokes:56 / 84 /min distance table/ram, max. stroke up, adjustment up:415 mm table surface area:710 x 500 mm hole in the table:320 mm table height over floor:800 mm passage to the back:320 mm ram surface:450 x 280 mm ram adjustment:63 mm weight:4,1 t dimensions (W x D x H):1,35 x 2,0 x 2,6 m overload protection in ram:mechanical

pressure:200 t distance between columns:2100 mm stroke:550 mm Distance table/ram, stroke up:1800 mm table surface area:2000 x 2800 mm table height over floor:760 mm ram surface:2000 x 2000 mm Side window:2000 mm feed down:400 mm/s power requirement:51,0 kW weight:33,0 t dimensions (WxDxH):3,25 x 3,5 x 5,4 m Height above floor:5,4 m foundation pit:not necessary

pressure:200 t distance between columns:2100 mm stroke:550 mm Distance table/ram, stroke up:1800 mm table surface area:2000 x 2800 mm table height over floor:760 mm ram surface:2000 x 2000 mm Side window:2000 mm feed down:400 mm/s power requirement:52,0 kW weight:33,0 t Dimensions (WxDxH):3,25 x 3,5 x 5,4 m Height above floor:5,4 m foundation pit:not necessary

pressure:400 t distance between columns:3250 mm distance table/ram, max. stroke up, adjustment up:1000 mm stroke:800 mm table surface area:3250 x 1400 mm table height over floor:1250 mm die cushion capacity:170 t die cushion stroke:200 mm die cushion area:1800 x 1000 mm distance between cutting impact cushioning:2610 mm side window:800 mm ram surface:3250 x 1400 mm return capacity:51 t speed down:300 mm/s speed up:300 mm/s working speed:16 - 33 mm/s quantity of oil:2900 l power requirement:100,0 kW weight:70,0 t Dimensions (WxDxH):4,9 x 3,1 x 7,6 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 cutting impact absorption:hydraulic

pressure:400 t distance between columns:1250 mm stroke:250 fix mm no. of strokes:45 /min distance table/ram, max. stroke up, adjustment up:825 mm table surface area:1000 x 900 mm column travel -side:400 x 700 mm ram surface:1000 x 900 mm ram adjustment:100 mm capacity of ejector in table:40 t ejector stroke:160 mm power capacity:270,0 kW weight:44,0 t Dimensions (WxDxH):2,4 x 3,6 x 7,2 m height over floor:6,4 m

pressure:125 t stroke:25 fix mm no. of strokes:70 - 700 /min distance between columns:1150 mm distance table/ram, max. stroke up, adjustment up:400 mm table surface area:1150 x 1000 mm hole in the table:900 x 220 mm side window:650 mm ram surface:990 x 850 mm ram adjustment:60 mm material width:250 mm material thickness:2,5 mm power requirement:46,5 kW weight:29,5 t roll feed:mechanical, Schuler, WK 8-250

Pressure:080 t throat:380 mm stroke:8 - 112 mm no. of strokes:60 /min distance table/ram, max. stroke up, adjustment up:472 mm table surface area:840 x 610 mm table height over floor:800 mm passage to the back:520 mm ram surface:650 x 400 mm ram adjustment:70 mm power capacity:7,5 kW weight:6,9 t Dimensions (WxDxH):1,1 x 2,15 x 3,2 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 overload protection in ram:mechanical ram counterbalance:pneumatic clutch-/ brake combination:pneumatic