press hidraulic used for sale

Pressure regulator manually adjustable, ultrapure gas regulator DRÄGER TESCOM Type: 44-3262H283-001 Inlet pressure: max. 35 bar Outlet pressure: 0 - 7 bar stainless steel ! Mint ! Dimensions: 140 x 140 x 100 mm

Manufacturer: Kallesoe, Width mm: 1350, Length mm: 5000, FREE TEXT: With feeding KL20 and stacking line,

Dough section and knitting machine Sinmag SM-330Y semi-automatic - Semi-automatic roll press - Sharing and impact - Manufacturer: Sinmag Europe - 30 pieces - Model: SM-330Y - Dough insert: 750- 2400 grams - Unit weight: 25-80 grams - Machine weight: 340 kg - 400 Volt/ 3Ph/ 50Hz - Year of construction 10 / 2020

Manufacturer: Hess , Type: Rahmenpresse, Year: ca.1995, Work piece width min-max mm: ca.1500, Min.-max. workpiece length in mm: 2500, Min.-max. workpiece height in mm: 10-90, Working widht max mm: 2500, Hydraulical/pneumatical: elektrisch, Year :ca.1995

Key data: 400 t, 160 mm

Nominal forming force of the press 400 t Table 1250x825 mm Dimensions of the ram 900x560 mm Lifting of the ram 30-160 mm Machine weight 22 T Power of the main electric motor 30 kW Dimensions L x W x H --> 1550 x 2900 x 3360 mm complete with press line = Production LASA, Spain year 2008 = - Decoiler 4 t - coil width 400 mm, coil outer diam. 1600 mm Coil inner diameter 450/550 mm, unwinding speed up to 25 m/min - Pre-feed machine RAPID PRESS max. width 420 mm, material up to 3 mm, max. speed 70 m/min - Documents, electrical diagrams, etc.

Dough dividing and rounding machine Bun press Fortuna Automat Size 3 Partial head reworked with stainless steel knife NEW Dough insert up to 2300g depending on TA Dough divider without knitting plate E-system NEW DGUV V3 tested Connection 400V, 1.6 kW, 16A-CEE plug Dimensions: 720 x 800 x 1510 mm Used machine overhauled + Spare parts service Option: Platform or chassis Maintenance contract Warranty E-Box Service Package We have a wide range of bread presses!

Offer 25021 Technical data approx.: - Compressive force 250 t - Projection 360 mm - Table size approx. 1100 x 800 mm - Diarrhea hole in the table approx. 320 mm - Tappet area approx. 800 x 475 mm - Peg hole in the tappet mm - Plunger adjustability 110 mm - Stroke adjustment 30 - 140 mm - Max. stroke rate 45 1/min - Pneumatic connection 6 bar - Drive 400 V / 22 kW - Space requirement approx. W 1400 x H 2990 x D 2700 mm - Weight approx. 13 T

SMG 320 cold forming press for sale. Year of build 1981 Model HPU 315-1300/1150 The machine has a crack in the head piece. Drive power: 2 x 55 KW Oil volume of one tank filling 3800 liters Maximum ram force: 3200 KN Drive cylinder: 3 pieces Cylinder 1: 2000 KN Cylinders 2+3: 600 KN each maximum adjustment: 310 mm Find more here - / Contact us at -

Manufacturer: Friz, Year: 1997, Type: MFP 22/14/11, Press length mm: 1100, Pressing width mm: 800, Work piece thickness max mm: 95, Year :1997

2004 Alphatech Model RPS4000 Description: Electro-hydraulically driven frame press Series: Type:RPS 4000 Date of manufacture:12.2003 plunger force From approx. 4000 kN kN plunger force Up to approx. 916 kN kN plunger stroke approx. 600 mm Installation table - column max. 1050 mm Max. plunger rapid speed approx. 600 mm/sec Max. Splunger working speed approx. 41.7 mm/sec Max. Return speed approx. 440 mm/sec Table surface (WD) approx. 900965 mm Full volume Hydrauliko! HLP 46 approx. 5300 litres Main drive power 290 kW+ 255kW + 130kW Control voltage 230 VAC/ 24VDC Operating voltage 400 V /50 Hz Colour scheme: System RAL 1014 Control cabinet, control panel and hazard labelling RAL 2002 Find more here - / Contact us at -

Liebergeld Li-transmatic Colombo Agostino for sale. Year of build 1990 Model G 400/1100/250/5 Nominal pressing force: 4000 KN Stroke : 250 mm Infinitely variable stroke rate: 20 - 60 1/min Table top usable, width x depth: 1100 x 900 mm Plunger plate usable, width x depth: 1050 x 800 mm Installation height, bottom stroke, top adjustment: 720 mm Vertical adjustability of the ram: 20 mm Table ejector cam-controlled Find more here - / Contact us at -

Manufacturer: Europress, Type: 1000 VE, Power kg/h: 35 m³/h, Supply case m³: 0,53, Hydraulikal power kW: 5,5, Ballenpresse: yes, Pressdruck kN/ to: 300, Einfüllöffnung b x h x L mm: 700 673, Ballenmass b mm x l mm x h mm : 500 x 650, Ballengewicht kg: 50 - 200, Year :2001

A vulcanising press with 4 shelves, it was purchased as a spare for the currently used one and has been standing unused since new, in total it has worked for us 0h. Model XL8-350T-700x700x4 l´LC Pressure 350T 700x 700mm thickness 6()mm Hotplate resistance Ra:,I .6a (2.5 μm) - Type of heating electr. Max. temperature 200 ‘C Pressure on workplate approx. 7 I kg-´cm2 piston diameter I 600mm -f 500mm Hydraulic pressure 16Mpa Machine structure Ko1umno,-a Motor power .of hydtaulic station ,- 5.5kW Heating power for J..ai:d working plate 9 x 0.9kW= 8.lkW Weight p,-assembly approx. 12000 g Press dimensions : Approximately 2800x I 200,´350Chnin Find more here - / Contact us at -

Offer 25020 Specifications: - Compressive force 200 t - Projection 400 mm - Table size approx. 1000 x 750 mm - Diarrhea hole in the table approx. 320 x 220 mm - Pushrod area 940 x 400 mm - Plunger adjustability 100 mm - Stroke adjustment 20 - 130 mm - Drive 380 V / 10 kW - Space requirement approx. W 1400 x H 2980 x D 2900 mm - Weight approx. 13000 kg

Qty. 1 Second-hand aluminium extrusion press line Mfc.: TCS, Asimakis, Sistem Teknic Force: 2200 MT Billet dia.: 8” Built: 1979 Still in operation! Type: Hydrauli horizontal Hydraulic pressure: 235 bar Scope of supply: Billet Loader Billet Furnace Hot Shear Billet Transfer Table Extrusion Press Run-Out Table Single Puller Cooling Table Stretcher Profile Stacker Ageing Furnace

Specifications Maximum pressure: 85 tons Year of Make: 1994 Pressing force: 103 tons/m² Number of ties: 4 - vertical Channel cross-section: 750 x 1100 mm Dimensions of the tailgate: 1020 x 1750 mm Bale weight: 500-650 kg Weight: 26 tons Power connection: 400 V/ 55 kW Bale tying: automatic

Manufacturer: Ocamc, Type: Kopp Elta, Year: 1990, Min.-max. pressing length in mm: 2500, Min.-max. pressing height in mm: 1200, Min.-max. pressing depth in mm: 600, Compressed air bar: 6, Year :1990

Erika Record Gr. 7 20 pcs dough dividing and knitting machine Year:2017 - Manufacturer: Erika Record Karl Schmidt GmbH - Semi-automatic roll press - To share and make an impact - Weight range: 70gram to 160gram - Type: 7 20 pcs - 20 pieces - 400 Volt 0.75kW 50Hz - Year of construction 2017

Manufacturer: Istel, Type: Eckschrankpresse, Bauyeshr : 1998, Hydraulical/pneumatical: motorisch/pneumatisch, Press hight mm: 1050/900/800, Press depth mm: 1050/900/800, Machine rigging: automatisch, Compressed air bar: 6, Gewicht ca. kg : 2000, Year :1998

Specifications: Working length: 4100 mm Stand width: 3650 mm Press force: 220 to CNC control: OPERATOR OPII graphic Color Screen Size: 14" Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Mot. adjustable back gauge Projection: 420 mm Stroke: 180 mm Auto. Crowning Laser monitoring Motor power: 17 kW CE mark Dimensions (length x width x height): approx. 4800 x 2300 x 2900 mm Weight: approx. 16 tons Accessories: various tools

Specifications: Working length: 6200 mm Pressing force: 400 tons CNC control: CYBELEC ModEva 10S Number of controlled axes: 7 Controlled axes: Y1/Y2; X/1; R; Z1/Z2 Stroke: 315 mm Projection: 410 mm Crowning Motor power: 75 kW Tool clamping at the top and bottom Laser monitoring: FIESLER Dimensions (length x width x height): approx. 6300 x 2500 x 3850 mm Weight: approx. 40,5 tons Accessories: many tools Zustand / condition: very good condition

Specifications: Working length: 3100 mm Stand width: 2650 mm Pressing force: 100 tons CNC control : AMADA OPERATOR II 14-inch TFT color screen Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Mot. adjustable back gauge Projection: 415 mm Stroke: 200 mm Working height: 960 mm Crowning Engine power: 9 kW Dimensions (length x width x height): approx. 4300 x 2300 x 2950 mm Weight: approx. 8 tons Accessories: 1 set of segmented AMADA tools

Specifications: Working length: 3100 mm Stand width: 2650 mm Pressing force: 125 tons CNC control: AMADA OPERATOR II graphic 14-inch TFT color screen Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Automatic crowning Mot. adjustable back gauge Projection: 300 mm Stroke: 180 mm Working height: 960 mm Infrared photocell vertical and horizontal : SICK Motor power: 11.5 kW Dimensions (length x width x height)): approx. 3500 x 2200 x 2900 mm Weight approx. 9 tons Accessories: 1 set of AMADA tools 1 die : V50-35-22-16

Specifications: Working length: 4100 mm Stand width: 3650 mm Press force: 170 to CNC control: OPERATOR II grafic Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Mot. adjustable back gauge Projection: 300 mm Stroke: 200 mm Crowning Working height: 960 mm Motor power: 13 kW Dimensions (length x width x height): approx. 4500 x 2200 x 2900 mm Weight: approx. 14 tons Accessories: 1 set of tools

Specifications: Working length: 3100 mm Pressing force: 150 tons CNC control: ARA TS1 2D simulation touchscreen Controlled axes: Y1/Y2; X; R; Z1/Z2 Mot. adjustable back gauge Stroke: 300 mm servo-electric drive Tool holder : MODUFIX Motor power 22 kW Dimensions (length x width x height): approx. 4000 x 2300 x 2900 mm Weight: approx. 13 tons

Specifications: Working length: 1600 mm Pressing force: 32 tons CNC Control: TS1 2D Simulation Touch Screen Controlled axes: Y1/Y2; X Mot. adjustable back gauge Stroke: 215 mm servo-electric drive Crowning Tool clamping: WILA system Working height: 910 mm Motor power : 6 kW Dimensions (length x width x height): approx. 2000 x 1900 x 2100 mm Weight: approx. 3,3 tons Accessories: 1 set of new tools

Specifications: Working length: 3050 mm Distance between stands: 2690 mm Pressing force: 130 tons CNC Control: DELEM DA69 adjustable back gauge Controlled axes: Y1 / Y2; X; R; Z1 / Z2 CNC Table Bending Compensation MODUFIX clamping hydr. Tool clamping at the top and bottom Pneumatic tool displacement Angle measuring system Stroke: 365 mm Projection : 410 mm 2 pcs bending aids Motor power: 12.5 kW CE mark Dimensions (length x width x height): approx. 3800 x 2350 x 3150 mm Weight : approx. 13 tons Accessories: Tool Condition: good condition

Fully automatic baler Manufacturer: PAAL Type KONTI 275 D Year of Make: 2000 specifications: Press force: 75 t Drive power: 1 x 45 kW Total connected load: kW __ / 170 A Throughput under operating conditions: 280 m³/h Filling opening: 1,020 x 1,550 mm Bale size:750 x 1,100 mm Binding: 4-fold vertical incl. front printing plate slot cover Machine weight: approx. 25 t Bale weights: up to approx. 600 kg Including: - Free kicks - Large digit display

Good day We hereby offer you a used baler from the manufacturer HSM, type VK 4812. The following technical data have been taken from the manufacturer's operating instructions and brochures, for which we cannot assume any liability for accuracy and completeness. Manufacturer: HSM Type VK 4812 Year of construction: 2011 Operating hours 20,580 hours Pressing force main press 48 t Drive power 30 kW Machine weight press 12 t The machine documentation is available in German. A viewing is possible by appointment in our workshop. We would be happy if this machine is interesting for you. Your service team Mertens & Frowein GmbH

Falch Pressure Washer R10/800, 1000 bar; only 2939 hours in use; complete with accessories as well as two rotary guns. Price basis for negotiation: 15.000,00€ net! If you have any questions, please call 0049 176 70044689 Mr. Becker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 mobile: 0049 176 70044689 Mr. Becker Office/ Storage Address: Birkenstraße 15 89185 Humlangen- Hüttisheim Ulm Registration Court: HRA722943 VAT ID NUMBER: DE279047055

Manufacturer: HYDRAP Model: HPDZB 160 Year of Manufacture: 1986 Type of Machine: Hydraulic Press Nominal Force: 178 kN Stroke Length: 500 mm Voltage: 380 V Frequency : 50 Hz Nominal Power: 17.5 kW Current : Alternating Current (A) Weight: 7.5 tons Oil Viscosity : Unknown Maximum Load : 178 kN Safety Distance): Not provided Oil Quantity: 125 liters Weight : 23.000 kg Find more here - / Contact us at -

Manufacturer: Igomak, Year: ca. 1970, Press depth mm: 500, Press length mm: 1000, Press press opening max mm: 450, Number of cylinders: 3 Stück/Durchmesser 100 ca, FREE TEXT: Heizplatte Oben/Veröängerte Tisch jede Seite 1000 mm, Year :ca. 1970

Inv. Num. : 8150 Type: PDqV 4-500 Producer: KRUPP Created: 1972, GO 2008 Parameters: Compressive force: 500 t Table length: 3000 mm Table width: 1800 mm Distance between frame walls: 3100 mm Maximum stroke rate upper table: 11 1/min Ram stroke: 850 mm Adjustment of the ram: 350 mm Main motor power: 75 kW Machine weight: 158000 kg According to the GO in 2008, the press was in operation for a maximum of 100 hours. In the years 1972–2008, the press was operated in two shifts.

Used Fette tablet press model Perfecta 3000. 45 station. Initial pressing force 230 Kn. Main pressing force 100 Kn. Max tablet diameter – 16 mm. Max tablet filling depth 18 mm. Capacity 486000 tablets/hour. EU-B 19 mm tooling with the machine. Machine manufactured in 1995, overhauled in 2004.

Manufacturer: Italpress, Type: Program 30, Working widht max mm: 3000, Working width min min mm: 1800, Hydraulical/pneumatical: hydraulisch 3 PS, Wight approx. kg: 1800,

Wood - Briquetting press Amis ABP 60 L-exhibition machine- ---------- Technical data ---------- Briquette Ã: 60 mm, hydraulic power unit 3 kW: 140 bar, voltage: 400 V, frequency: 50 Hz, fuse: 16 A, power approx.: 20-35 kg/h, weight approx.: 300 kg - Easy handling - Hydraulic control - Briquette diameter 60 mm - Briquette length adjustable as desired (max. 60 mm) - Motor equipped with motor protection switch and emergency stop- No electronic components such as controllers, sensors and sensors or complicated controls

Inv. Num. : 8191 Type: Xpert 320 Producer: Bystronic Created: 2018 Parameters: Compressive force: 320 t Maximum bending length: 4100 mm Lifting height: 565 mm Motor power: 30 kW

Manufacturer: Hess, Type: Kantenpresse, Working length mm: 2500, Working widht mm: 2000, Carriage: yes, Pneumatik: yes, Cylinder: 80, Wight approx. kg: 300,

PART NUMBER: 7552 Specifications: - dimensions of the hobs 2550x1350mm - number of batches 2 - electrically heated shelf - total ground clearance 400mm - Clearance between shelves 280mm and 100mm - Number of cylinders 4 - cylinder diameter 90mm - 1.1kW pump motor - total power 31.3kW - dimensions length/width/height 3050x1600x2200mm - weight about 3500kg ADVANTAGES – made in Germany – electrically heated shelves – unpainted – very good condition – used press Net price: 28900 PLN Net price: 6721 EUR depending on the price of 4.30 EUR (Prices may change with higher fluctuations)

PART NUMBER: 7553 Specifications: - dimensions of the hobs 2550x1100mm - number of batches 1 - electrically heated shelf - ground clearance 360mm - Number of cylinders 4 - cylinder diameter 80mm - emergency disconnection of the machine - total power 15.5kW - 1.5kW pump motor - dimensions length/width/height 2900x1300x2100mm - weight about 3000kg ADVANTAGES – made in Germany – electrically heated shelves – golden shelves – unpainted – very good condition – used press Net price: 27900 PLN Net price: 6488 EUR depending on the price 4.30 EUR (Prices may change with higher fluctuations)

Manufacturer: Lauffer Model: 400 T Year of Manufacture: 1992 Type of Machine: Hydraulic Press - column-guided, but (without die cushion) - contactor control - digital position measuring system, Technical Data - Max. Pressing Force: 4000 kN - Max. Return Force: 340 kN - Ram Stroke: 500 mm - Installation Height (Platen/Ram): 1100 mm - Column Clearance (Front/Side): 1200 mm / - - Table Size: 1200 × 800 mm - T-Slots on Table (DIN 650): 22 H11 mm - Table Height: 850 mm - Ram Surface: 1200 × 800 mm² - T-Slots on Ram (DIN 650): 22 H11 mm - Drive Power: 76 kW - Max. Operating Pressure: 290 bar - Control Pressure: 90 bar - Machine Weight: 23000 kg Find more here - / Contact us at -

Dough dividing and rounding machine Bun press Fortuna Automat Gr. 3+ with active shutdown Head cleaning to the back Partial head reworked with stainless steel knife NEW Dough insert up to 2400g depending on TA Dough Dividers 30 Pieces/Piece with rewind button E-system NEW DGUV V3 tested Connection 400V, 1.6 kW, 16A-CEE plug Dimensions: 720 x 800 x 1510 mm Used machine overhauled Option: Stainless steel pedestal Wirkteller Neu Service Package Maintenance contract Instruction & Commissioning Delivery With us you will find one of the largest selection of bun presses!

Dough dividing and rounding machine Bun press Fortuna Automat Size 4 H with active shutdown Head cleaning with hand crank Parting head newly revised 30-piece with stainless steel knife NEW Dough insert 1200 to 3600 g, Unit weight from 40 to 120 g E-system NEW DGUV V3 tested with rewind button Connection 400V, 16A-CEE plug Approx. dimensions: 710 x 730 x 1500 mm WxDxH Used machine overhauled Option: Stainless steel pedestal New Acting Plate Maintenance contract Service Package Instruction & Commissioning Delivery Come to our large bakery equipment exhibition!

Working width: 120 mm Working height: 1200 mm : 6000 mm Number of cylinders: 12 St. 1 pc. LAMINATION PRESS Type SLV - H - 6.0 - 1.2 - 120 - 6V - II -P -------------------------------------------------------- Technical specifications -------------------------------------------------------- working dimensions: Length: 6000mm Height: 1200mm Gluing thickness: 20 - 120 mm Number of pressure cylinders: 12 pcs. Cylinder type: Ø 63 x 120 mm Max. force per pressure cylinder: 50 kN Specific pressure: 7.5 kg/cm2 Number of hold-down devices: 6 pcs. Cylinder type: Ø 40 x 100 mm Max. force per hold-down device: 20 kN Number of sections: 2 Max. pressure: 160 bar Power: 3.0kW Pump flow: 10L/min Manual control with hydraulic valves every work surface in contact with glue is covered with INOX Materila covered each pressure cylinder and the hold-down device can be locked separately equal pressure in each ...

Manufacturer: Hess, Type: Mobil Kantenbügelpresse, Min.-max. workpiece height in mm: 60, Pre-warming of massive edges and heating rod: yes, Working length mm: 1.100, Working widht mm: 1.100, Carriage: yes, Tiltable design: yes, Cylinder: 2,

Orma LS/ECO/CA 30/13 self-loading press Working length 3000mm Working width 1300mm Automatic material loading Adhesive Application System Shelves heated with oil up to 130C Upper clamping force 57t Side clamping force 9t Year of production 2001 CE Certified

Manufacturer: Hess, Bauyeshr : 1997, Hydraulical/pneumatical: hydraulisch, Press length mm: 3800, Press hight mm: 2900, Machine rigging: hand, Wight approx. kg: 4000, Year :1997

Vacuum diaphragm press Wemhöner type VARIOPRESS model Basic 1000 S Specifications: Heating plate format (mm): 2850 x 1550 Electric heating plate design: aluminium top heating plate Total pressing force (kN): 2400 Chamber pressure max. (bar): 6 Operating temperature max.: 180 degrees Celsius Batch or workpiece size max. (mm): approx. 2460 x 1180 Thermoplastic film as roll goods: Width of the film: approx. 1430 mm Thickness of the foil (mm): approx. 0.25 - 1 Hyperbaric chamber height (mm): max. up to 180 Connected loads: Installed power (kW): approx. 46 Required air pressure (bar): approx. 8

Hot press Make: ORMA Type: NPC/DIGIT 6/95 New machine Technical datas: Press area: 3000x1300 mm Amount cylinder: 6 Lift & max. press opening: 400 mm Total pressure: 90t Electro-heater 18 kW for thermo-oil (120°C) Optional: - Aluminium coating for panels - 650 mm stroke - Parallelism control by sensor - Extra charge for down stroke design - 4 side loading - Max. temperature up to 150°C - Max. temperature up to 200°C - Mylar protection foil - Pressure plate covered with glass fier fabric Teflon - Hardware for Industry 4.0

Hot plate press (electric) Brand: ORMA Type: NPC 6/120 new machine Technical data: Heating plates: 3500x1300mm Cylinder: 6 pieces Press force: 120t Stroke/opening dimension: 450mm Connection value: 28.8kW (ELKOM plates) Options: - Intermediate plate - Anodized surface for ELKOM panels - Parallelism sensor á 1,000.00 EUR - Pressing mechanism from above (fixed lower plate) - Max. temperature till 150°C - Max. temperature till 200°C - 4-sided loading possible - Mylar protective film - Fiberglass Teflon protection - Hardware for Industry 4.0