129,238 used machines on RESALE, but how to find them? Machine Search
Crank press HECKERT PKZ 400.1 built in 1980. Technical data : - maximum pressing force: 400 t - working path - lower position of the slider to the maximum pressing force: 21 mm - maximum drawing depth: 125 mm - pressing force using the maximum drawing depth: 160 Mp - idle speed of the slider: 18 min-1 - maximum number of switchings: 9 min-1 - ram stroke (min-max): 315 mm - slider adjustment: 200 mm - holding force of the drawing device at air pressure: 63 Mp, 5 kp / cm2 - force of the drawing device ejector at air pressure: 10 MP, 7 kp / cm2 - total weight: 38.5 t
Operating pressure: 150 bar, Number of foerders: 42 l/min, Drive: electric 15 kW, 400 volts, Engine hours: approx: 1, Trolly, incl. zubehoer,
Operating pressure: 1000 bar, Number of foerders: 17 l/min, Drive: electric 35 kW, 400 volts, 63 A, Engine hours: approx: 2 h, Trolly, incl. pistol, 10 m HD hose, 15° flat jet dues,
EHT TRUMPF TruBend 8230-40 CNC press brake was built in 2007 in Germany by EHT Werkzeugmaschinen GmbH (now Trumpf Werkzeugmaschinen Teningen GmbH). The machine, distinguished by its high productivity and excellent precision, is used for the economical machining of workpieces with a maximum length of 4050 mm. The rigid, internally stress-free design combined with a press force of 230 tonnes ensures excellent bending results, even during the most demanding challenges. The operator, in turn, has at his disposal a convenient foot switch and an intuitive CYBELEC CNC control, in which advanced machining programmes are created in just a few steps. The TRUMPF TruBend 8230 CNC hydraulic press brake weighs 18100 kg. Technical specifications of the EHT TRUMPF TruBend 8230-40 press brake - CNC controller: CYBELEC ModEva 10S - number of axes: 5 (X, X1, R, Z1, Z2) - maximum press force: 230 t (2 ...
Complete clean air extraction system with briquette press and piping with gate valves, etc. Extraction system for woodworking companies with briquetting press undermounted. Aspirator ALKO Type: MOBIL-JET 250 Year of construction 2003 Extraction diameter 250 mm Nominal capacity 4900 m³/h Motor power 6.5 KW Dimensions approx. 330 x 135 x 2.95 cm with suction control for automatic slide control. Briquette press WEIMA/ ALKO Type: APC30S Year of manufacture 2007 Motor power 5.5 KW Pressing capacity 30 - 50 kg/h Briquette diameter approx. 50 mm incl. complete piping with branches, bends, valves. there would be another batch of extraction pipes with fittings, which can be purchased cheaply. Plant has been dismantled and packed ready for loading. Condition see pictures, or follow the item description. Parts can also be picked up ...
mechanical briquette press briquetting press chip press defective SPÄNEX Type: KS7 Total motor power 13.2 KW Pressing capacity up to approx. 300 kg/h Briquette diameter approx. 50 mm The machine has been in my warehouse for several years. In the briquette press, the brass bearing of the crankshaft is worn. The bearing bushes would have to be replaced. The control system would have to be checked. It is sold as it is, because I clean up my stock. Documents on the machine are available. Condition see pictures, or follow the item description. Parts can also be picked up by yourself. All measurements are approximate. All information to the best of our knowledge but without warranty. Subject to prior sale. The items can be picked up by yourself or shipped at the expense of the buyer. Shipping costs are a guideline, depending on the distance and unloading op ...
Operating pressure: 350 bar, Flow rate: 21 l/min, Engine: Vanguard 2-cylinder, 4-stroke gasoline engine Working hours: 2h
a hydraulic single-stand drawing press Müller model CLZ.100.1.34, Y.O.M. 1994, good condition, with UVV, Siemens S7 screen control, throat gap 400 mm, installation height 800 mm, table surface 800 x 730 mm, stroke 600 mm, drawing cushion 40 to., drawing cushion stroke 200 mm.
Used Monobelt, type: NP06-AD belt press for dewatering sludge. Belt width 60 cm. The belt is made entirely of stainless steel, has a fully automated high-pressure pump and two sets of flat jet nozzles for washing the belt. It is equipped with smooth belt feed regulation and a pneumatic installation that controls the belt tension and thus the sludge crushing force. It is also equipped with an automatic belt setting controller on rollers. The press control cabinet is very extensive and controls the press itself but also additional equipment (sludge pump, mixer, dispenser). Press with equipment: - screw pump for sludge with a capacity of 6 m3 per hour with capacity regulation, - dispenser of various types of emulsifiers with capacity regulation and a mixer. The whole is a complete set for work in the agri-food industry, processing, sewage treatment plants, distilleries, bre ...
press is after overhaul: full function complete mechanical parts, pneumatic and control system. The press has a new pneumatic clutch, the original was electromagnetic clutch as old system. Press capacity: max. 45 t Pull force: max. 45 t Counter force in pressing position: max. 17 t Stroke of the punch: 175 mm Filling height: max. 140 mm Deduction: max. 85 mm Compression distance: max. 55 mm Top pressing: max. 15 mm Stroke rate: 9 – 26 min.-1 Motor: 7,4 kW Approx: 3000x1200x1800 mm Net weight: about 5000 kg
Pressing rollers Tranklein Model 600 Year 1980 Width 600 mm Available Direct
New machine 2-year warranty Advantages: + unbeatable price-performance ratio + already standard: mobile machine, ideal for fast floor mopping + Stainless steel cutting blade + Quickly replaceable, coated cutter head + Up to 4 different cutter heads can be used with one machine + extremely wide weight range (16 gr - 400 gr round-knitted possible!) + Uniform division of the dough, excellent rounding of the dough pieces + Effective shutdown at the touch of a button + Ergonomic knife cleaning position (head can be swivelled forward by 90 degrees) + Active switch-off, pressing time and duration can be programmed + Digital display, 10 programs can be stored + Easy and quick adjustment of the effective room height + Side holder for knitted plate, immediately at hand SERIES accessories: 3 knitting plates included SPECIAL accessories, available at an additional cost: - Add ...
Filter press plate filter ultrafiltration plate filter used Manufacturer: Rhone Poulenc Type: UFP 70 Max working pressure: 4.5 bar/64 psi Torque: 8 mxkg 6x24 plates approx. 2000 x 600 H 1700 mm Changes and errors in the technical data, Information and prices as well as intermediate sale reserved.
Table top height: 910 mm Table top size: 700 x 380 mm Max drilling depth: 145 mm Max long hole length: 240 mm Height adjustment distance 135 mm Engine power: 1.5 kW Voltage: 400 V / 50 Hz Speed: 3,000 rpm Net weight: approx. 200 kg Suction nozzle: 100 mm Dm Dowel drilling device: Pitch 16, 22, 25, 32 mm with precision grid roller Driving equipment: Yes Frame stop 90°: pluggable Two-jaw chuck: up to 20 mm clamping range Hand eccentric tensioner: 1 piece 1 Lever control: Yes Measuring clock in handwheel: Yes Miter stop: Yes, double angle adjustment stop from 22.5° to 75° infinitely adjustable
Plate press Filter press Chamber filter press Industrial wastewater technology -used- Manufacturer: FAZZINI Type: F500 Operating pressure 15 bar Plate size 500 x 500 mm 20 plates with hydraulic unit 1.5 kW and piston pump 0.75 kW Dimensions: approx. 2400 x 750 x 1600 mm All items are checked for function before delivery, if technically possible !
Block glue press Müro 5000/A2 WT; Working width 705mm; 3x dryer; Stack increase; Heat guide plate; Stand unit. Padding press Müro 5000/A2 WT; working width 705mm; 3x dryer; pile elevation; heating sheet; floor mounted machine.
New machine 2-year warranty Advantages: + unbeatable price-performance ratio + already standard: mobile machine, ideal for fast floor mopping + Stainless steel cutting blade + Quickly replaceable, coated cutter head + Up to 4 different cutter heads can be used with one machine + extremely wide weight range (16 gr - 400 gr round-knitted possible!) + Uniform division of the dough, excellent rounding of the dough pieces + Effective shutdown at the touch of a button + Ergonomic knife cleaning position (head can be swivelled forward by 90 degrees) + Active switch-off, pressing time and duration can be programmed + Digital display, 10 programs can be stored + Easy and quick adjustment of the effective room height + Side holder for knitted plate, immediately at hand SERIES accessories: 3 knitting plates included SPECIAL accessories, available at an additional cost: - Add ...
The press brake HAMMERLE BM 200-3100 press brake was built in 1996. The folding machine was serviced regularly. Technical parameters of the press: - control: INFINITRON - number of NC axes: 11 - pressure: 200 tons - bending length: 3100 mm - working stroke: 400 mm - distance between the body walls: 3240 mm - maximum distance between the table and the bumper: 965 mm - voltage: 3 x 400 Volt - control voltage: 24 V = - total power: 28 kW - deflection arrow compensation - total machine width: 4400 mm - total height of the press: 3400 mm - weight of the press: 16 600 kg
Code: 0119 Brand: KOLMAG - ITALY Model: PGP 600 F Hydraulic press for moulds, frames, furniture elements, solid wood doors, plastic materials, composite materials and various Press modular structure with heavy thick plates without weldings and worked by tool machine Oleodinamic plant with pistons prefilling system in order to have a quick opening and closing of the platens Dimensions of massive steel platens mm 1600 x 500 - Thickness mm 60 with electric resistances - Max temperature 260°. N° 3 pistons diameter mm 240 Pressure kg/cm2 56 Thrust Tonn 450 Safety photocells Hydraulic power unit Kw 7,5 Power absorbed heating platens 31 Kw Control board with pressure control gauge - Timer for platens opening - Telethermometer to regulate upper platen temperature - Telethermometer to regulate lower platen temperature - Switches for opening and closing of the platens - Emerge ...
Completely overhauled HSB 15 incl. certified oil pan and protective fence for a quick and Trouble-free commissioning. Overhauled in 2021 Optional new 8m3 bunker and conveyor screw available. Including. Used machine warranty
Qty. 1 Second-hand crank hot forging press – dismantled & in storage Mfc.: Hyunjin Industry, Korea Built: 2008 Status: dismantled and in storage Force: 2500 T Total weight of the machinery: approx. 250 T
For sale is a top-equipped system for briquetting including silos, conveyor technology and packaging unit, consisting of the following components: For sale is a comprehensive briquetting plant including silos, conveyor technology and packaging unit, consisting of the following components: Silo and discharge technology 2x steel silos, each approx. 20 m³ usable capacity Including silo discharge systems Briquetting presses 1x Briquetting press SPM PAWERT AG, Type 84/1 - I 90/200, Masch.-Nr. 1060, Power: 55 kW 1x Briquetting press SPM PAWERT AG, Type 96/1 - I 90/200 SBP, Masch.-Nr. 1140Bj.2021 Conveyor and transport system Complete transport route including: • - 2 cooling lines • - All conveyor belts, roller conveyors and accessories Cutting & packaging technology 2 cross-cut stations with noise protection cabin 1 Feeder KÖRA Packmat, type presumably EF-235 1 shrink pack ...
Press brake edge machine edge bench press used Manufacturer: Mengele Type: C320-4B Built: 1966 last revision and repair: 2000 Location D-01587 Riesa Dimensions WxH: 6,250 x 3,650 mm Edge knife width: 6,150 mm sheet thickness at 6,000 mm bending length: approx. 7.5 mm. The machines are designed for very deep shaft bends, therefore very deep cheek recesses. Original 300 t pressing force - In 1989 the pressing force was increased to 350 t. The press is in very good condition despite its age. The machine is disassembled and ready for loading. documentation for the machine is available. Weight: about 45 t
250 ton x 3000mm 3100mm ben length 3200mm between frames MASSIVE tooling package Bend aid and voice control!
GERDA HYDOMAT PAWN 100 automatic press was built by GERDA HYDOMAT S.A. in Poland in 2001. The machine, with a high press force of 100 tonnes, is dedicated to the mass production of precision steel parts. All machining processes, i.e. precise stamping and threading of the workpieces, are performed fully automatically. The sheet metal feeder accurately feeds the material into the workspace, where the slider and reliable threading head are located. The design, which is made from the highest quality raw materials, in turn maintains the highest stability during even the most intensive challenges. The GERDA HYDOMAT hydraulic press weighs 5200 kg. Technical specifications of the GERDA HYDOMAT PAWN 100 press - press force: 100 t (1000 kN) - work table dimensions (L x W): 700 x 320 mm - height of working space: 250 mm - slider stroke: 0-70 mm - number of slider strokes: 10-40/min - numbe ...
Stationary high-pressure pump unit Hammelmann HDP 77 on base frame. Similar/no Uraca, Woma, Kamat Pump type: HDP 77 Operating pressure: 490 bar Flow rate: 59 l/min. Drive speed: 1800 RPM Drive power: 65 kW with AC 55 kW 3 motor AH 250 M-4; 400V; 50 Hz Dimensions LxWxH: approx. 1665x1212x1641 mm Weight: approx. 1050 kg Built: 2008 Condition: in very good used condition. Includes complete documentation.
ADIRA BB 3515 servo electric press brake was built in 2018 in Portugal by ADIRA – Metal Forming Solutions, S.A. The offered machine, apart from passing the start-up tests, has not worked in production and is like new. The ADIRA BB3515 CNC press brake is the perfect choice for precision machining of workpieces with a maximum length of 1500 mm. The machine is distinguished by the use of many state-of-the-art technical solutions, thanks to which it will meet all, even the most intensive challenges of modern business. The powerful electric drive developed in Bluedrive technology, is free of any filters, seals and hydraulic oil compared to a standard hydraulic system. This solution makes the machine much faster, quieter and more environmentally friendly than other presses available on the market. The electric drive also eliminates the occurrence of the so-called deflection arrow and its ...
Baler Presto CC 20 M, built in 2019, press force 20 t, with restraint. Specifications: Manufacturer: Presto Type: CC 20 M Year of Make: 2019 Hours: 1022 Press force: 20 t Cycle time: 24 s Drive power: 7.5 kW Filling opening: 1030 x 750 mm Filling volume: 0.53 m³ Binding: 3-fold, manual Throughput at bulk density of 35 kg/m³ - 1.6 t 60 kg/m³ - 2.3 t 100 kg/m³ - 2.8 t Bale dimensions: 700 x 750 mm Bale weight: up to 300 kg Dimensions: 3300 x 1235 x 1860 mm (LxWxH) Machine weight: approx. 2500 kg Materials: paper, cardboard, foil Remark: The machine is in good condition. It was inspected and tested by us in 28816 Stuhr. You can find the video at the top of the pictures, or on our website or YouTube channel. Viewings, also under power, are possible at any time by arrangement. Video calls are possible on request. We will also be happy to answer any questi ...
STATIONary high-pressure pump unit URACA RS716E/400 on base frame for all cleaning and pressure testing tasks. Similar but no Hammelmann, Woma, Kamat Operating pressure: 400 bar Flow rate: 56 l/min. Drive speed: 1,475 RPM Drive power: 44 kW with SIEMENS 45 kW 3 motor 1LA6 223-4AA60 225M IP 55 with URACA MSÜV 16/700 and PSV8/800 valves Dimensions LxWxH: approx. 1300x1100x1400 mm Weight: approx. 1.115kg Built: 1995 Condition: in good used condition.
Baler Presto CC 50 M, semi-automatic, year of construction 2015, press force 50 t, with lift-tilt device Specifications: Manufacturer: Presto Type: CC 50 M Year of Make: 2015 Hours: 1932 Press force: 50 t Cycle time: 52 s Drive power: 7.5 kW Filling opening: 1030 x 1100 mm Filling volume: 0.85 m³ Binding: 3-fold, wire, manual Throughput at bulk density of 35 kg/m³ - 1.3 t 60 kg/m³ - 1.7 t 100 kg/m³ - 2.2 t Bale dimensions: 750 x 1100 mm Bale weight: 300 kg Dimensions: 4705 x 1680 x 2540 mm (LxWxH) Machine weight: approx. 4000 kg Materials: paper, cardboard, foil The user manual is available in German. Remark: The machine is in good condition. It was inspected and tested by us in 28816 Stuhr. You can find the video at the top of the pictures, or on our website or YouTube channel. Viewings, also under power, are possible at any time by arrangement. On ...
- High pressure cleaner PTC TORPEDO MINI-E 3.8 M 230/50 Powersteam and TORPEDO MINI-E 5.8 T 400/50 Powersteam similar but no Dynajet, Oertzen, Falch, - Cold water / hot water / steam 32 bar to 140°C / high pressure steam 150 or 200 bar to 150°C for cleaning and disinfection The following models are available: - TORPEDO MINI-E 3.8 M 230Volt/50Hz Powersteam 8 l/min. at 150 bar - TORPEDO MINI-E 5.8 T 400Volt/50Hz Powersteam 8 l/min. at 200 bar - Dimensions and weight: 110x64x98cm, approx. 150kg - incl. 10 m high-pressure hose, spray gun, lance and flat jet dues 25°
Baler Dixi 80 SLD, with lift/tilt device, semi-automatic, year 2016 Manufacturer: Dixi Type: Dixi 80 SLD Year of Make: 2016 Hours: 1030 Drive power: 11 kW, 400 V / 32 A Filling opening: 1,040 x 1,110 mm (WxL) Press force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (WxHxL) Bale weight: approx. 500-600 kg Binding: 3-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (LxWxH) Machine weight: approx. 8,000 kg Materials: paper, cardboard, cardboard Note: The press is in very good condition. The hydraulic hoses were to be replaced. The operating instructions are available. Viewings, also under power, are possible at any time by arrangement. On request, we also carry out tests with your material for an expense allowance. We will also be happy to answer any questions you may have about the machine by pho ...
used
Pressure plate intermediate table Grafoteam MDT 260 C; condition overhauled; 2 pieces available; Arm length 780mm; Max. Plate size 780x820mm. Plate conveyor Grafoteam MDT 260 C; condition rebuilt; 2 pic. on stock; arm lenght 780mm; max.plate size 780x820mm.
automatic baler Manufacturer: PAAL Type: KONTI 700 G/S Year of construction 2010 specifications: Press force: 1940 kN/ 198 t at 300 bar Specific pressing force: 160 N/cm² Bale size: 1,100 x 1,100 x length in mm Filling opening: 2,000 x 1,020 mm Drive power: 3 x 75 kW Throughput capacity (according to manufacturer's specifications): approx. 650 m³/h Capacity at 35 kg/m³: 22.5 t/h Capacity at 60 kg/m³: 36.5 t/h Capacity at 100 kg/m³: 55.5 t/h Binding: 5-fold vertical Bale weight: approx. 800 - 1,450 kg depending on baled material and bale length Machine weight: up to approx. 47 t
Nominal force: 4000 tons Slider's undershoot to BDC: 10 mm Slider stroke: 630 mm Frequency of continuous strokes per min: 10 The highest frequency of single strokes per min: 7 Closed height: 1180 mm Adjustment of closed height: 200 mm Slider's dimensions: -From left to right: 5000 mm -From front to back: 2000 mm Dimensions of the plate of the die: -From left to right: 5000 mm -From front to back: 2000 mm Capacity of the main drive: 250 kW Overall dimensions: -From left to right: 7640 mm -From front to back: 5980 mm -Height above floor level: 10490 mm
Fully automatic baler Manufacturer: PAAL Type KONTI 325 C Operating hours: 16,316 h Year of Make: 1994 Technical manufacturer data: Press force: 80 t Specific pressing pressure: 10.3 kg/cm² Drive power: 1 x 45 kW Total connected load: 70 kW / 140 A Throughput under operating conditions: 240 m³/h Performance at: 35 kg/m³ Bulk density: approx. 8.56 t/h 60 kg/m³ bulk density: approx. 14.0 t/h 100 kg/m³ bulk density: approx. 22 t/h Filling opening: 1,020 x 1,750 mm Bale size: 750 x 1,100 mm Binding: 4-fold vertical + preparation for additional 3-fold horizontal bonding Machine weight: approx. 28 t Bale weights: 525 to 725 kg Including: - Free kicks - Wirbulator 15 kW
Furnace 1200 temperature 10 - 1200 Celsius 2 heating zones 100kW auto door PLC Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce bergonzi flott Erfurt Weingarten smeral schuler ebu mueller zts kosice wlochy minster Stanko stankoimport glaser huta zygmunt aft donaldson eumuko Elblag Engel Demag Arburg Krauss Maffei Battenfeld Manesty Mazak Voronezh Trumpf Amada Cincinnati Netstal Rose Forgrove Illig Foremost Nissei Sandretto Fette Mazak Mori seiki Haas Okuma Gildemeister Doosan Daewoo traub hwacheon index Wema zeulenroda mueller Erfurt tox presso technik dunkes galdabini hare ponar zeulenrdoda eitel Ziel des Spannungsarmglühens ist die Reduzierung von Eigenspannungen im Material. Solche Spannungen entstehen zum Beispiel durch Gefügeum ...
Fully automatic baler Manufacturer: PAAL Type KONTI 325 C Operating hours: approx. 45,000 h Year of Make: 2004 Technical manufacturer data: Press force: 94 t at 300 bar Specific pressing pressure: 10.3 kg/cm² Drive power: 1 x 75 kW Total connected load: 92 kW / 170 A Throughput under operating conditions: 340 m³/h Performance at: 35 kg/m³ bulk density: approx. 11.5 t/h 60 kg/m³ bulk density: approx. 20.0 t/h 100 kg/m³ Bulk density: approx. 32 t/h Filling opening: 1,020 x 1,750 mm Bale size: 750 x 1,100 mm Binding: 4-fold vertical Machine weight: approx. 28 t Bale weights: 525 to 800 kg Including: - Free kicks - Wirbulator 15 kW
WEIBERT WJ-LB2 Long-hole drilling machine WEIBERT WJ-LB2 400V 2.2 KW ( 3 hp) n=2840 min. Drilling table size 600x320mm Drilling table height 870mm Drilling depth 245mm Drilling width 205mm Height adjustment 165mm Swivel ling unit swivel -45°/90°/+45° Machine table made of GREY ING! Manual adjustment with handwheel! AGGREGAT AND TABLE FROM MACHINE GREY! G&WJ-LB2 option: Dowel drilling device available with pitch 16-22-25 and 32mm G&WJ-LB-DÜBEL
Hydraulic workshop press PREMIUM WPMEH 30/2 Demonstration article Condition: slight signs of wear --> paint defects/scratches Standard equipment - Overload safety valve - Press pressure gauge - Switching valve up / down - Cylinder piston chrome-plated - Press table with stake-out bolt - Operating instructions / CE Specifications: Pressing capacity max. 30 tons Electro-hydraulic drive Two drive speeds Manual Hand Pump Press table chain (height adjustment) Oil flow stage 1/2 2.82 / 11.84 l/min Piston speed level 1/2 9.8 / 3.57 mm/s Return speed 18.11 mm/s Motor power 1500 W Mains connection 400/50 V/Hz Machine height 2120 mm Machine length without pump 1000 mm Machine width 695 mm Inlet length 750 mm Strap width 260 mm Inlet height max. 950 mm Machine length with pump 1315 mm Machine width with pump 805 mm Piston stroke 380 mm Weight 385 kg Subjec ...
Force 6- 45 kN Working height 300-490 mm Projection 100-195 mm as good as new. Condition Accessories - Buttons Embossing Unit with Numbers Applications: for stamping, embossing, numbering, straightening, riveting, punching, etc. Function: By pressing down the hand lever after placing the tool on the workpiece, the special strike spring is tensioned and released. The impact impact is transferred to the workpiece and is infinitely adjustable. Advantages: Infinitely adjustable impact force High impact performance with little effort Tolerance compensation (for different workpiece heights, the same impact force is always achieved) Pneumatic drive can be retrofitted Universal spring impact presses
250 ton x 3000mm MASSIVE SPECIFICATION €100,000 EUR Tooling package!
mobile compressed air with stainless steel sheets metrics: Length: 1.44 m Width: 0.36 m Height: 0.16 m
For sale automatic press PTV 65 produced from SACMI Italy for ropp caps. Tools for 25mm and for 28mm ropp caps.
Stationary high-pressure pump unit Hammelmann HDP 122 on base frame without motor. Similar but no Kamat, Uraca, Woma. Pump type: HDP 112 Operating pressure: 530 bar Flow rate: 55 l / min. Drive speed: 1500 rpm. Drive power: 55 kW without engine, with pressure control valve, Bwfz23o8wi with safety valve, with oil cooling system. Dimensions LxWxH: approx. 2000x1000x1400 mm Weight: approx. 300 kg Year of construction: 1998 Condition: in good used condition.
maximum number of results exceeded
please refine your search
