127,294 used machines on RESALE, but how to find them? Machine Search
Used Hydr. Adira press brake with CNC controlled crowning WILA Scope of delivery: without tools LazerSafe Security System/CE Foot pedal Two front support arms 500mm, movable Table crowning: WILA motorized Special features: patented HEXA-C frame: low-torsion and therefore very accurate Hydraulics in semi-hybrid equipment very energy-saving because the engine is in the Idle only runs at 5Hz The bounce during start-up and descent is controlled by two high-precision servo valves Two linear encoders ensure accurate positioning of the press beam Adjustable guide of the press beam made of self-lubricating material Electrics and hydraulics with surge protection X&R axis run on backlash-free ball screws driven by servo motors 2 manual stop fingers Z axis Machine rear secured with light barrier AD 60 CNC control type Adcontrol 2 D Machine is repaired, check ...
1x VEB column drill, 1x vice, 1x grinder and 2x jerry can Auction-ID: A1-41682-76
Inv. Num. : 7246 Type: HCFP Producer: Hidroliksan Created: 2022 Parameters: Compressive force: 100 t Table length: 1400 mm Table width: 1000 mm Stroke length: 700 mm Distance between frame walls: 1100 mm Machine height: 3100 mm Machine length: 1600 mm Machine width: 1600 mm Machine weight: 4000 kg
Grapes, fruit and berry press -Juice and pomace tub on sliding table, (pomace tub with auger, juice tub with pump and control) -Central filling as well as fixed cleaning line -New Prestuch in 2022 -New drainage hoses, stockings in 2021 -New lid seals in 2022 -Various electrical components in control renewed 2021 -Matching pre-juicer to go with it.
Tool presetting and measuring machine Manufacturer: E. Zoller GmbH & Co. KG Type / Model: Saturn 1 Type plate: V4001-00191 Year of manufacture: 2001 Equipment / accessories (visible): • Basic machine Zoller Saturn 1 • Pick-up plate / turntable • Various tool holders, including HSK 63 • Machine table / substructure with integrated PC housing • Documentation partially available (visible in the substructure)Condition / Note: Machine is partially dismantled. The monitor is missing, and not all components are mounted. Function currently unknown/unchecked. Traces of use present. Sale is expressly made as a hobbyist/spare part or overhaul object. S ...
Korsch EK II single station eccentric tablet press, maximum tablet diameter 50 mm, maximum depth of fill 40 mm, Maximum pressure 120 kN. capacity up to 3600 tablets per hour using a single-tip tooling, machine net weight approx. 600 kg
Specifications: Capacity 63 tons Stroke rate 140 h/min Projection 250 mm Plunger stroke 8-100 mm Table , WxD approx. 700 x 480 mm Installation height approx. 400 mm
Press capacity: 45 ton Ram stroke adjustable: 10 - 40 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 220 - 300 mm Free frontal opening L-R: 560 mm Table surface area : 550 x 450 mm Slide area: 550 x 360 mm Hole in table: 450 x 100 mm Number of strokes: 100 - 500 s.p.m. Required power: 7,5 kW Weight of machine approx.: 6,2 ton
Key data: 18 t
Specifications: Clamping force 18 tons Opening force 20 tons Adjustable force in each case Lifting speed adjustable approx. 0 - 1 m/min Extendable table size 800 x 660 mm Installation height min 230 mm Installation height max. 760 mm
Specifications: Press force adjustable 10 – 100 kN Projection 210 mm Table size W x D approx. 500 x 400 mm Installation height with/without clamping plate 300 mm Stroke 100 mm
Press capacity: 50 ton Throat depth: 265 mm Stroke: 250 mm Daylight: 400 mm Table surface area : 700 x 450 mm Slide area: 550 x 300 mm Table height over floor: 850 mm Approach speed: 32 mm / sec Working speed: 6,3 mm / sec Return speed: 42 mm / sec Required power: 4 kW Dimensions L x W x H: 1290 x 1160 x 2085 mm Weight of machine approx.: 1,75 ton
Promess KA-EMF80 Servo Press 80 KN Manufacturer: Promess Type: KA-EMF80 Type: Servo Press KN: 80 Item Condition: New Calibrated: Yes Strain gauge amplifier: BA 624.u2 More servo presses new and used - you can find them in our shop! International shipping costs on request!
Key data: 642 t
CNC Press Brake Manufacturer: SMD Yawei Type: PBB-630/6200 Year of construction: 2018 CNC control: CYBELEC ModEva 15 Pressure: 6,300 kN Working width approx. 6,200 mm DSP-Laser-TX Connected load: 400 V / 95 kVA
Press capacity: 45 ton Ram stroke adjustable: 20 - 80 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 300 mm Free frontal opening L-R: 710 mm Table surface area : 700 x 450 mm Slide area: 700 x 360 mm Hole in table: 600 x 100 mm Number of strokes: 80 - 400 s.p.m. Required power: 10 kW Height over floor approx.: 2900 mm Weight of machine approx.: 7,2 ton Control: Siemens S7
Promess KA-EMF20/150 Servo Press 20 KN Manufacturer: Promess Type: KA-EMF20/150 Type: Servo Press KN: 20 Item Condition: New Calibrated: Yes Strain gauge amplifier: BA 62601 More servo presses new and used - you can find them in our shop! International shipping costs on request!
Press capacity: 80 ton Ram stroke adjustable: 4 -60 mm Slide adjustment: 0 - 80 mm Shut height (stroke down, adjustment up): 310 mm Free frontal opening L-R: 800 mm Table height over floor: 1150 mm Table surface area : 780 x 640 mm Slide area: 800 x 460 mm Hole in table: 690 x 170 mm Number of strokes: 30 - 300 s.p.m. Required power: 21 kW Height over floor approx.: 2900 mm Weight of machine approx.: 12 ton Control: Siemens S5
Press capacity: 35 ton Ram stroke adjustable: 6 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 250 mm Free frontal opening L-R: 430 mm Table surface area : 410 x 410 mm Slide area: 307 x 187 mm Hole in table: 170 x 110 mm Number of strokes: 60 - 300 s.p.m. Weight of machine approx.: 2,4 ton
Capacity: 250 ton V ? Ring nominal force: 30 - 125 ton Counter ram nominal force: 30 - 125 ton Ram stroke: 67 mm Table surface area : 560 x 600 mm Slide area: 560 x 560 Number of strokes: 80 s.p.m. Weight of machine approx.: 14.000 kg
200 ton x 4000mm with Rolleri Pneumatic clamps
Code: 0377 Brand: COLOMBO R Model: PCA.S Automatic continuous-cycle hot-pressing line for the production of panels, furniture, doors, paneling, sandwich panels, and various Sturdy supporting structure Composition: 4-roll gluing machine OMMA- Width 1400 mm Disc transfer conveyor Preparation table Press COLOMBO 5500 x 1400 mm - n° 8 pistons - diameter 150 Solid steel platen Top-down pressing Pressure 4 kg/cm² Automatic unloading with photocell devices Work surface height 800 mm Closing times are reduced to 1–2 seconds and opening times to 2–3 seconds Overall dimensions press mm 5960 x 1900 x 2320 h Complete line length 22 mt Installation of the line does not require any foundation
Code: 0378 Brand: ORMAMACCHINE Model: NPC 6/90 E - CE Standard Hot press with electric platens for veneering, panels, furniture, custom-made furnishings, wooden doors, kitchens, bathroom furniture, composite materials, plastics, and various - CE Standard Technical data: Platen dimensions 2500 x 1300 mm Total thrust 90 tons N° 6 cylinders Cylinder diameter 70 mm Stroke 400 mm Pressure 3 kg/cm² Motor 2 Hp Electric Platens: Max temperature up to 120° C, max working pressure 7 kg/cm². Platen made of a 12 mm aluminium plate which resistances are inserted in underneath a chipboard support with reinforcement tubes inside Perimeter emergency rope Double rack system Lateral guides on platens for a perfect movement further safety feature of the pressing platen Overall dimensions mm 3060 x 1650 x 1850 h Weight kg 3400
Specifications: Capacity 63 tons 2 strokes 105 rpm and 140 rpm large projection 450 mm ! Plunger stroke 8-100 mm Plunger adjustment approx. 70 mm Table , WxD approx. 700 x 780 mm Plunger, W x D approx. 450 x 280 mm
Maximum force: 1600 tons Slider stroke length: 400 mm Unattainable-course: 12 mm Number of courses of a slider per minute: 16 Number of single turn-on: 12 The closed height: 870 mm Adjustment: 220 mm Under-forginig plate: -From left to right: 1600 mm -From front to rear: 1600 mm -Thickness: 650 mm Slider overall dimensions: 1600x1600 mm Aperture in a table: 1000x1000 mm window dimensions in cheeks: 1650x1650 mm Course of a rigid pusher in a slider: 100 mm Force of a rigid pusher in a slider ton-force: 80 Main electric motor power: 110 kW Course of pneumatic pillow: 160 mm Force of pushing out of a pneumatic pillow ton-force: 71 Hydropneumatic pillow: -Working course: 250 mm -Force of pushing out ton-force: 25 -Force of a clip ton-force: 250 Press overall dimensions: 4670x4670x8110 mm Press weight: 147 tons
Specifications: Capacity 50 tons Stroke rates 115 rpm Projection 250 mm Plunger stroke 8 - 120 mm Plunger adjustment approx. 70 mm Table , WxD approx. 650 x 500 mm Diarrhoea och approx. 250 x 180 mm
automatic baler Manufacturer: WELGER Type: SB 2000L Machine No.: 1307 51 321 specifications: Pressing force: 7 t Drive power: 11 kW Bale format 500 x 400 x length in mm Machine weight: approx. 1.9 t
Bale size (W x H) approx. 1,100 x 700 mm Bale weight approx550kg
HOT PRESS model SIMI 4LP second hand machine plates useful size mm. 2500 x 1300 n.04 pistons diam.mm. 80 max. thrust Ton. 60 specific pressure max. kg.2 / cm2 opening mm. 320 hot water plates heating via wood boiler (optional) weight kgs. 3000
Key data: 15 t, 66 mm
Burger Press D07 Length 1.20 m Width 0.60 m Height 1.70 m 2 Hand control Switch to foot control 1 press die
Specifications: Capacity 300 to Stroke rate 35 strokes Plunger width 1000 mm Projection 450 mm Plunger stroke 20 - 140 mm Plunger adjustment 80 mm Engine power 30 hp Weight roughly estimated 18 tons
Specifications: Capacity 40 tons 2 strokes 57 + 86 H/min Projection 250 mm Plunger stroke 8 - 88 mm Plunger adjustment approx. 63 mm Table , WxD approx. 570 x 450 mm Max. installation height approx. 330 mm
According to photos, without tools, weight estimated Auction-ID: A1-45666-2
Used multi-layer paver Zenit 844 Built in 1993 inclusive: 1 piece concrete mixer 750 l Teka 1 piece concrete mixer 500 l approx. 12 pieces of used moulds approx. 100 production pallets Used concrete multilayer machine Manufacturer: Zenith Type: 844 Year: 1993 including: - 1 pcs 750 liter mixer Teka - 1 pcs 500 liter blender - about 12 moulds - about 100 pcs production boards
maximum number of results exceeded
please refine your search
140 € 
