prepress used for sale

Screw trough approx. 2,800 x 660 mm, screw diameter: 370 mm, 2-cylinder solids pump SP2180-400, capacity 8 cbm/h, with a distribution station and hydraulic unit with 55 kW

Reference Num.: 3992 Brand: HEIGHTS Type: Inca 70 Polymer Processor (CTP) Construction year: 2003 Available: directly Status: Not in production Location: Europa Equipment: - Maximale Plattenbreite: 811 mm (31.9?) - Minimale Plattenl?nge: 254 mm (10.0?) - Dicke der Platte: 0.15 - 0.30mm (0.006 - 0.012?)

Technical data baler: Manufacturer Presona Type LP 40 EH1 PET Year of construction 1998 Operating hours 37,884 hours, data according to operating hours counter, as of March No. of bales pressed 311,714 pieces, data according to bale counter as of March Pressing force of main press 40 tonnes Specific pressing force 5.2 kg/cm² Dimensions of feed chute 1,250 x 1,100 mm Filling volume 2.2 cm³ Theoretical throughput 290 m³/hour Throughput capacity under operating conditions 160 m³/hour Bale dimensions 720 x 1100 mm, variable length Drive power 15 kW Connected load, total 18 kW Absicherung min. 50 A, max. 63 A 5-fold vertical binding, fully automatic Throughput rates with a bulk density of 30 kg/cbm approx. 3 to 4 tonnes/hour bulk density of 50 kg/cbm approx. 5 to 6 tonnes/hour bulk weight of 100 kg/cbm approx. 7 to 10 tonnes/hour Filling volume of hydraulic oil tank 600 litres Effective t ...

Technical data baler: Manufacturer BOA Type 2040.S.5V.71.37 Year of manufacture 2003 Operating hours approx. 35,598 hours, as of March Pressing force main press 71 t Specific pressing pressure 9.1 kg/cm² Operating pressure 280 bar Dimensions of feed chute 1,620 x 1,080 mm Bale dimensions 1,100 x 1,100 mm, length variably adjustable 800 up to 1,600 mm Drive power 37 kW Tying system 5-fold vertical, fully automatic Throughput rates for quality: B12 / B19, 40 ? 60 kg/cm³, up to approx. 9 t/hour, bale weight up to 850 kg/bale, depends on material Hydraulic oil tank capacity 800 l Transport dimensions 10,020 x 2,400 x 3,400 mm (l x w x h) Machine weight press approx. 24 t Noise level

Technical data baler: Manufacturer Presona Type LP 40 EH1 Year of construction 1995 Operating hours 16,917 hours, data according to operating hours counter, as of March No. of bales pressed 28,745 pieces, data according to bale counter as of March Pressing force of main press 40 tonnes Specific pressing force 5.2 kg/cm² Dimensions of feed chute 1,250 x 1,100 mm Filling volume 2.2 cm³ Theoretical throughput 290 m³/hour Throughput capacity under operating conditions 160 m³/hour Bale dimensions 720 x 1100 mm, variable length Drive power 18,5 kW Connected load, total 26 kW Absicherung min. 62 A, max. 100 A 5-fold vertical binding, fully automatic Throughput rates with a bulk density of 30 kg/cbm approx. 3 to 4 tonnes/hour bulk density of 50 kg/cbm approx. 5 to 6 tonnes/hour bulk weight of 100 kg/cbm approx. 7 to 10 tonnes/hour Filling volume of hydraulic oil tank 600 litres Effective tra ...

Extruder with vacuum vertical prepress LVP-35, gearbox overhauled in 2011, screw wings equipped with carbide. Press equipped with DC motor 60 kW (can be converted to 55 kW three-phase motor at an additional cost). Machine is functionally tested and comes with some spare parts.

Thermal CTP AGFA Avalon LF year 2007 73,000 sqm produced with AGFA Apogee Prepress Manager Price: on request

Thermal CTP AGFA Avalon LF S year 2006 with AGFA Prepress Workflow Price: on request

Max. Sheet format: 680 x 780 mm Min sheet format: 240 x 240 mm No chemistry Improves pressroom productivity, reduces makeready time. Open interface supports most rips and prepress workflows Cip3 compatible Protek aww 650 processor Very good condition Available immediately

Heidelberg XL 106-4+LX2 age 2015, impr 130 mill.Condition: Very Good, Machine is in perfect condition Still installed in Danmark, - Max speed: 18.000 ark/hour, - Print Press Center, - Wallscreen monitor and software, - Auto register, - Intellistart, - Preset Plus feeder, - Suction brush roller first unit, - Integrated dobble sheet control, - StaticStar, - Autoplate pro 25 sek. per unit, - Combistar Can Ink Temperature Control, - FilterStart Compact dampening Water Filter, - Powderstar AP 500, - Cleanstar powder exhaust, - Drystar Combination,IR and hot air, - Extended delivery with Preset Plus, - Instant Gate (prepress interface), - Color Assistant Pro software

1 piece RMG gas train with DUNGS prepressure regulator and DUNGS double solenoid valve, used

Rotative tablet press of 27 stations Max. diameter of the tablet 16 mm Filling depth 18 mm Pressing capacity 80 Kn Prepressing capacity 20 Kn Production from 48.000 to 100.000 h Dimensions : 1.000 x 950 x 1876 . Weigh 1850 Kg. Force feeder Type of tool : B