We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,266 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
There are two Nomoco M100 available, operational hours counter: 55,998h, with instruction manual, machine 1 is functional, but on machine 2 the control system has lost machine-specific programms/data that must be reloaded.
used
X-travel: 1300mm, y-travel: 550mm, z-travel: 560mm, table width: 600mm, max. load: 1t, table height: 950mm, controls: Siemens SINUMERIK, length: 4800mm, width: 1970mm, height: 2450mm, weight: 5.4t, with documentation.
used
Max. spindle rotational speed: 1430/min, spindle power: 1.5kW, connected load: 14kW, including documentation.
used
Produces light sources in the form of tubes, product dimensions: 2-4x100-1200mm, including coating, cleaning, sealing, high vacuum station, labelling station and Compressor ALMIG LENTO 15.
used
Feinzeiger Innenmessgerät FEINMESSZEUGFABRIK SUHL 10 - 19 mm 16 mm missing Dimensions: 250 x 180 x 70 mm
used
Feinzeiger Innenmessgerät FEINMESSZEUGFABRIK SUHL 10 - 19 mm Dimensions: 250 x 180 x 70 mm
used
Internal measuring device, fine pointer Internal measuring device FEINMESSZEUGFABRIK SUHL 10 - 20 mm in wooden box Dimensions: 305 x 110 x 60 mm
used
Präzisionswasserwaage Längenmesstechnik Limbach Type: 150x150/0,02 Accuracy: 0,02 mm/m im Holzkasten used, tested ! Dimensions: 180 x 180 x 40 mm
used
Präzisionswasserwaage HEINRICH ERB KG Type: 250x250/0,02 Accuracy: 0,02 mm/m im Holzkasten used, tested ! Dimensions: 285 x 275 x 61 mm
used
Präzisionswasserwaage HEINRICH ERB KG, LÄNGENMESSTECHNIK LIMBACH Type: 250x250/0,02 Accuracy: 0,02 mm/m im Holzkasten used, tested ! Dimensions: 285 x 275 x 55 mm
used
tilting table, clamping table PAGUS clamping area: 120 x 120 mm in two planes Tiltable -30° - 30° , 0° - 45° 2 grooves groove width: 10 / 18 mm with fine graduation ! Dimensions: 130 x 120 x 105 mm
used
Universal lathe Reiden S250 completely overhauled incl. accessories Preloved lathe in excellent condition has been completely overhauled incl. gearboxes etc. and is sold with some accessories (several bezels, three-jaw lining, etc.). Guides have been completely re-scraped, etc. Machine works and can be visited. We have to give away various accessories free of charge, as we have no use for them after the sale. Lathe has a crank to increase the turning diameter, e.g. when overtightening rims, etc. • Turning diameter above the bed up to 540 mm • Center height 250 mm • Distance between centers 2500 mm • Turning diameter above the face slide 310 mm • Turning diameter in offset 630 mm • Spindle speeds 16 - 1120 rpm • Dimensions L/W/H 3750/1100/1400 mm • Spindle bore 42 mm • Weight approx. 3500 Kg
used
used
Ref. -No.: 10332 Manufacturer: GEORG MüLLER Year of construction: 1969 Type of control: Konventionell Control: N/A Storage location: Halberstadt Country of origin: Germany Machine length: 1200 mm Machine width: 800 mm Machine Height: 1800 mm Grinding height: 120 - 200 mm Max. Grinding length: 310 mm Grinding Width: 175 mm Total Power Requirement: 2,8 kW Weight Of The Machine Ca.: 0,4 t Grinding head adjustment (vertical): 165 mm Max. grinding head infeed: 12 mm magnet clamping surface: 250 x 150 mm Grinding wheel dimensions: 170 x 100 x 76 mm Grinding spindle - speed: 2850 RPM Grinding spindle drive: 2,2 kW Drive motor power: 380 V
used
Rotary table, rotary indexing table, dividing head, dividing head -Clamping surface: Ø 305 mm -Height: 120 mm -Dimensions: 420/370/H120 mm -Weight: 50 kg
used
Ball bearings, bearings, bearing set, accurate, radial ball bearings, roller bearings -Type: 71944CTP2HUL -Lubricating groove -Bore: Ø 220 mm -Outer diameter: 300 mm -Width: 75 mm -Number: 4x bearings available -Price: per piece -Weight: 14 kg
used
Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 270 mm -Throughout: Ø 85 mm -Short taper: 6 -Recess: 157 mm -Weight: 38 kg -with: signs of usage but functional
new
Stainless steel multi-clamping prism A143-6-10-fold, size W 57 x L 143 x H 76mm, ground on all sides with steps.
used
Tip distance approx. 500 mm Tip height above bed 125 mm 8 speeds from 220 – 1800 rpm Space requirements, length x width 1.2 x 0.6 m Weight estimated approx. 400 kg
used
Key data: 356 mm, 178 mm
technically tested and maintained, with signs of use
used
Year of construction: 2015 Condition: very good (used) X-axis travel: 925 mm Y-axis travel: 1,050 mm Z-axis travel: 600 mm Spindle speed (max.): 8,000 revolutions per minute Spindle speed (min.): 25 revolutions per minute Motor power: 2,200 W Total height: 3,525 cm Total length: 4,850 cm Total width: 2,998 cm Workpiece weight (max.): 700 kg Table load: 700 kg Input Current Type: AC Table width: 630 mm Tool length: 400 mm Total weight: 175,000 kg Coolant supply: 70 bar Equipment: Documentation/manual, infinitely variable speed Neff The Okuma Specialist and NeffBuy In addition, we will be happy to provide you with the all-round carefree package, inspection in our showroom including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as a briefing and subsequent service. We operate Okuma CNC service throughout Europe bo ...
used
Feinzeiger micrometer, without dial gauge Feinzmesserfabrik Suhl 600 - 700 mm TGL 15046-1 pitch: 0.01 mm with protective box, dimensions: 1000 x 560 x 55 mm used, checked ! Dimensions ( packaging ): 1020 x 580 x 80 mm
used
Description: Distance between centers: 800 mm Speed range: 32 - 1400 rpm Accessories: various multifix steel holders Type: AD With technical documentation as shown in the pictures weight approx.: 1,200 kg, Approx. Onsite Dimension. (l x w x h): 1,800 x 800 x 1,400 mm
used
Description: Length of the jaw: 900 mm Headstock for collet chuck type: F27 Collet opening: 22 mm Center height: 102 mm Largest distance between headstock and cross support: 335 mm Drive through leather/nilon V-belt for headstock: F27 With turret holder and other machine accessories as shown in the pictures For further technical data see pictures With technical documentation as shown in the pictures Approx. Onsite Dimension. (l x w x h): 1,300 x 600 x 1,680 mm, weight approx.: 500 kg
used
Description: Machine number: 1221 BL number: 140710 Table dimensions: approx. 745 x 160 mm With 3 T-slots Table movements: Lengthwise (by spindle or automatically): 260 mm Vertical (by spindle only): 310 mm Longitudinal (by means of lever): 235 mm Automatic table movements: 8 longitudinal feeds: 11 - 210 mm/min 8 vertical feeds: 11 - 210 mm/min Fast feed of the table: Longitudinal and vertical: 1000 mm/min Spindle head: Steep taper with driver according to standard ISO30 N.S.11/4' VSN33931 size 32 DIN2079 size 30 Spindle bore: diameter 15 mm Spindle speeds (infinitely variable by means of speed controller): 58 - 2000 rpm With accessories as shown in the pictures, including counter holder with horizontal spindles, with the corresponding side milling cutters, hobbing cutters and other cutters With technical documentation as shown in the pictures Approx. Onsite Dimension. (l x w x h): 1,050 ...
used
Description: Various sizes Example sizes: Diameter 10, diameter 12, diameter 15.5, diameter 14 and other diameters Approx. 52 pieces Approx. Onsite Dimension. (l x w x h): 580 x 400 x 350 mm, weight approx.: 30 kg
used
Surface Grinding Machine JONES & SHIPMAN 540 X, capacity 450x150 mm, magnetic plate, dust extractor, OPT »¿ï»¿ï»¿IDRESS E Factstor 2, Max working dimensions: 450x170 mm, Longitudinal travel x axis: 470 mm, Cross travel y axis: 171 mm, Clearance between worktable and spindle axis: 502 mm, Feed rate x axis: 2-25 m/1, Feed rate y axes: 0 - 1 m/1, Wheel speed: 2640 rpm, Wheel dimension: 200x20x31,75 mm, Spindle motor power: 1,5 Kw, Weight: 1.200 Kg, Accessories: Coolant tank, dust extractor, magnetic plate, OPTIDRESS E Factstor 2
used
Approx. Onsite Dimension. (l x w x h): 400 x 160 x 100 mm, weight approx.: 5 kg
used
Description: 280 - 510 mm Maximum 520 mm Approx. Onsite Dimension. (l x w x h): 660 x 320 x 50 mm, weight approx.: 5 kg
used
Description: Control: Siemens Sinumerik 840 D Travel paths: Z-axis: 220 mm X-axis: 300 mm Rapid traverse speed: 15 m/min Main spindle: Spindle hole: 26 mm C-axis (spindle, resolution): 0.01° Spindle speed: 100 - 8000 rpm Spindle power: 7 kW Rear spindle: Max. speed: 6000 rpm Power: 6 kW Voltage: 50 Hz 3x 400 Volt Total power required: 10 kW Incl. documentation weight approx.: 2,600 kg, Approx. Onsite Dimension. (l x w x h): 2,700 x 1,900 x 2,100 mm
used
Description: 1 x KERN CB 6 K 0.1 N, max. 6000 g 1 x ,SARTORIUS QC 64 IDE-S, max. 62 kg Approx. Onsite Dimension. (l x w x h): 800 x 600 x 700 mm, weight approx.: 25 kg
used
Description: Sturdy base with ground support surface, hardened and ground shaft. Stainless, anti-reflective chromed reading elements. Black reading scale for easy reading. Micrometric adjustment. The slightly raised edges of the sliding rod prevent the movement of the slide from damaging the graduation. The zero value and the scribing tip are aligned with the footprint of the socket (measuring range from '0'). Tracking measurements can thus be directly detected without calculation errors. Scoring point with hard metal coating. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 1,320 x 400 x 190 mm, weight approx.: 23 kg
used
Description: Sturdy base with ground support surface, hardened and ground shaft. Stainless, anti-reflective chromed reading elements. Black reading scale for easy reading. Micrometric adjustment. The slightly raised edges of the sliding rod prevent the movement of the slide from damaging the graduation. The zero value and the scribing tip are aligned with the footprint of the socket (measuring range from '0'). Tracking measurements can thus be directly detected without calculation errors. Scoring point with hard metal coating. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 1,320 x 400 x 190 mm, weight approx.: 23 kg
used
Description: Sturdy base with ground support surface, hardened and ground shaft. Stainless, anti-reflective chromed reading elements. Black reading scale for easy reading. Micrometric adjustment. The slightly raised edges of the sliding rod prevent the movement of the slide from damaging the graduation. The zero value and the scribing tip are aligned with the footprint of the socket (measuring range from '0'). Tracking measurements can thus be directly detected without calculation errors. Scoring point with hard metal coating. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 745 x 350 x 145 mm, weight approx.: 7 kg
used
Description: Sturdy base with ground support surface, hardened and ground shaft. Stainless, anti-reflective chromed reading elements. Black reading scale for easy reading. Micrometric adjustment. The slightly raised edges of the sliding rod prevent the movement of the slide from damaging the graduation. The zero value and the scribing tip are aligned with the footprint of the socket (measuring range from '0'). Tracking measurements can thus be directly detected without calculation errors. Scoring point with hard metal coating. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 1,320 x 400 x 190 mm, weight approx.: 23 kg
used
Description: Sturdy base with ground support surface, hardened and ground shaft. Stainless, anti-reflective chromed reading elements. Black reading scale for easy reading. Micrometric adjustment. The slightly raised edges of the sliding rod prevent the movement of the slide from damaging the graduation. The zero value and the scribing tip are aligned with the footprint of the socket (measuring range from '0'). Tracking measurements can thus be directly detected without calculation errors. Scoring point with hard metal coating. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 745 x 350 x 145 mm, weight approx.: 7 kg
used
Description: Material: 20CrMnTi, Usage: machining, Hardness: HRC 58-62 (50x65mm, h 25 mm) The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 250 x 90 x 90 mm, weight approx.: 3 kg
used
Description: Material: 20CrMnTi, Usage: machining, Hardness: HRC 58-62 (50x65mm, h 25 mm) The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 250 x 90 x 90 mm, weight approx.: 3 kg
used
Description: Material: 20CrMnTi, Use: machining, Hardness: HRC 58-62 (80x100 mm, h 40 mm) The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 320 x 120 x 120 mm, weight approx.: 12 kg
used
Description: Material: 20CrMnTi, Use: machining, Hardness: HRC 58-62 (80x100 mm, h 40 mm) The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 320 x 120 x 120 mm, weight approx.: 12 kg
used
Description: Material: 20CrMnTi, Use: machining, Hardness: HRC 58-62 (80x100 mm, h 40 mm) The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 320 x 120 x 120 mm, weight approx.: 12 kg
used
Description: Material: 20CrMnTi, Use: machining, Hardness: HRC 58-62 (100x260 mm, h 45 mm) The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 360 x 140 x 140 mm, weight approx.: 20 kg
used
Description: Material: 20CrMnTi, Use: machining, Hardness: HRC 58-62 (150x175 mm, h 50 mm) The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 450 x 180 x 150 mm, weight approx.: 26 kg
used
width of jaws: 150 mm, distance: 270 mm, Approx. Onsite Dimension. (l x w x h): 570 x 200 x 150 mm, weight approx.: 25 kg
used
turning diameter over bed:100 mm turning diameter over slide rest:70 mm turning length:80 mm total power requirement:1,0 kW weight of the machine ca.:0,5 t dimensions of the machine ca.:0,7 x 0,6 x 1,2 m facing lathe with manual feed, various accessories
used
KENYO VS80160 5-axis Machining center with CE Producer: Nanjing Kenyo Precision Machine Manufacture Co., Ltd YOM 2015 Simultaneously 5 axes Total Installed Capacity 22.4 kW 5-Axis vertical Milling machine for blanks up to 1000-1500kg Stroke X/Y/Z- 1600/800/800 mm Working table size 800x1800 mm Diameter of NC swivel table axle C 630 mm Rotating mass clamping force 4000 Nm Spindle clamping force: ≥ 2000 Nm Maximum mass load 2000 kg Spindle diameter 170 mm Spindle rotation angle- ± 110 Degree Tool Store Type BT40 ISO Tool magazine 24 pcs Maximum spindle rotation speed 10.000 rpm Spindle power 15 kW Ball-Screw pair HIWIN Spindle Hesheng Ball Bearings NSK Positioning accuracy ≤ X/Y/Z: 0.015 mm, C: 0.002 degree, B: 0.002 degree Repeat accuracy ≤ X/Y/Z- 0.01 mm, C:0.0015 Degree, B:0.0015 Degree Quick move: ≥ 10000 mm/min Milling speed: ≥ 1 to 8000 mm/min OC ...
used
automatic divider The divider RheoPan Precision is the basis of RheoPan line. It is very precise in weight thanks to a system of double weighing of the dough and the automatic adjustment of settings. Its stress-free division system allows it to handle both highly hydrated and fermented doughs, as well as hard doughs. It can thus produce a very wide variety of breads depending on the modules installed.
used
equipped with KNOLL fitter installation, type: KF 150/500 ( 2014)
used
X-travel: 189,2mm, y-travel: 101mm, z-travel: 638,3mm, max. rotational speed: 5000/min, swing over bed: 519mm, controls: FANUC Series 331i-MODEL A, connected load: 81.5kVA, length: 2991mm, width: 2289mm, height: 2089mm, weight: 6.57t, operational hours counter: 11.873h, including documentation and accessories.
used
General SKU401S1130 LocationBarneveld MakeEmerson network power TypeHPF12U302A3P10020 Mach.No.10940780001 Main Features Heating (medium)Gas Temp.18 °C Specified Features - Temperature control unit MaterialMild steel Temperating machinecheck With coolingcheck Temperature18-27°C. With temperature controllercheck With controlcheck Information Year of construction2012 With switchcheck With switchgearcheck( as is) CEcheck Floorspace0,9x0,75 m Total height2,05 m Weight300 kg Extra Specificationsthis machine is used to cool airTemperature control unitsLiebert HPFHeat exchangers > Temperature control unitsBrand > Liebert HPF What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in ...