668 offers precision

Category: 107: sheet metal working
New in: new
Price: request quote
Location: Land-de DE 59368 Werne, Gewerbehof 5-7
Seller: Theta Laser GmbH

It's to a fiber laser cutting system with a working range 3000 x 1500 mm. You can choose between various performance classes, 500Watt-6000Watt. The plant has a changing table (optional) and offers to cut the advantage and at the same time to unload Be.und. Exhaust system: The complex features a 3-Chamber exhaust system, this means an effective flue gas extraction since the area in which the lens is much more pressurized with vacuum is than the other area. It has to follow that are the complete inner cabin area sucked faster and protected optical components, the service life is extended significantly. The machine bed: A sturdy machine bed provides consistent and long-lasting results.  ...

Category: 109: other metal working machines
New in: 2007
Price: 27.200 EU€
Location: Land-pl PL
Seller: Kennedy Machines

Category: 106: presses
New in: 1983
Price: request quote
Location: Land-lt LT 37106 Panevezys, Klaipedos st. 75
Seller: SCG, uab

Manufactured by Tyazhpressmash Year of manufacture 1983 Nominal capacity, ton 250 Movable die stroke, mm 100 Max. upsetting ram stroke, mm 220 Upsetting ram work-stroke, mm 140 Upsetting ram return stroke with closed dies, mm 60 Distance between upsetting ram and dies stroke forward, mm 75 Number of strokes per minute 63 Die dimensions, mm 350 x 140 x 380 Electric motor power, kW 19 Machine dimensions, mm 3875 x 3250 x 1526 Machine weight, kg 22300 The upsetter is in nice condition. Machine is fully complete.

Category: 1900: general inventory
New in: used
Price: used machinery auction RESALE 99 €
Location: Land-de DE Germany, 47506 Neukirchen-Vluyn
Seller: Surplex GmbH

Weight approx.: 300 kg Dimensions (l x w x h) approx.: 700 x 530x 1950 mm Description: content: - cutter with indexable inserts with SK 50 holder - STIEFELMAYER precision spirit level - plug in shafts partly with machine tools - morse taper partly with machine tools - ring bolts - and other machine tools and accessories

Category: 704: fruits, vegetables, delicatessen, instant-meals machines
New in: used
Price: request quote
Location: Land-it IT OLANG
Seller: Lerchnhof

Ideal for fruit nectar production and further fine milled, was only 1 season in operation and is sold due to closure Products and substances are high-precision mixed and then mills. Particles are open-minded. Smooth, lump-free sources of powders in liquids. Aggregates, agglomerates and products can if necessary in a single pass will homogenized

Category: 109: other metal working machines
New in: new
Price: 35.950 €
Location: Wiener Neudorf
Seller: HESSE+CO GesmbH

: 35 mm : -35 M : 4 MK : 390 mm : 180 mm : 190 - 650 mm : 1.310 mm : 125 mm : 400 x 420 mm : 1.660 mm : 1.510 mm : 2.600 mm : 910 kg ERLO  (MADE IN SPAIN) for demanding workshop use drilling and milling machine automatic feed precision electromagnetic clutches geared drive cross table fixed base and displaceable headstock control panel cooling equipment with electric motor pump hand wheel for fine tuning clamping device for tools adjustable stop drill guard drilling capacity: 35 mm tapping capacity: M-35 spindle cone: MK 4 gap: 390 mm speed range: 94 - 2.225 rpm (16) 50 Hz 113 - 2.670 rpm (16) 60 Hz feed range: 0,10 - 0,18 - 0,24 (3) spindle stroke: 180 mm distance spindle-table: 190 - 6 ...

Category: 201: saws
New in: 1989
Price: 850 €
Location: Land-de DE 44532 Lünen, Jägerstr. 15
Seller: MSH-nrw GmbH

Roller table / table saw -sliding table way 250 mm -rotating blade to 45 degrees -Table size 785 x 500 mm

Category: 210: window production machines
New in: used
Price: 5.000 €
Location: ab Standort
Seller: Gebr. Engelfried oHG

Bore diameter: 8 mm Number of heads horizontal: 5 St. Number of heads vertical: 3 St. Control: ja ! Machine is still in use and can be visited! To sell on behalf of the customer! 1 Stegherr drilling center Type BZ The machine has 3 aggregate slides, of which aggregate slides 1 fixed and unit slides 2 and 3 via the control to preset values be positioned. Unit carriage 1 (fixed) equipped with: -------------------------------------------------- - a) 1 drilling unit for drilling the front side of the workpieces with Triple drill head, drilling distance: 28/41 mm - Drilling spindles individually retrievable - Drilling stroke: max. 80 mm - Speed of the drilling spindles: approx. 4000 rpm - Engin ...

Category: 102: lathes
New in: 2013
Price: request quote
Location: Land-at AT 4664 Laakirchen, Gewerbegebiet Süd 6
Seller: ZIEGLER Maschinen & Werkzeuge

-High precision machine with latest control of SIEMENS and SIEMENS servo drives -Compact design of the headstock -High speed spindle 4,500 min¯ ¹ with high precision and big sized tapered roller bearings -Switching between the two levels of transmission is effected pneumatically through a compressed air cylinder -Design of spindle assures a minimum noise -Wide machine bed with double rectangle tracks, also for roughing work -Bed tracks are hardened and ground -Tailstock is generously sized and can be positioned easily with a quick-clamping -Two front, separately movable sliding doors with integrated Windows -Microswitch prevents restart of the machine when do ...

Category: 103: milling machines
New in: 2007
Price: request quote
Location: ab Lager
Seller: FLECKENSTEIN Werkzeugmaschinen GmbH

x-travel:4.000 mm y-travel:3.000 mm z-travel:1.000 mm control:HEIDENHAIN iTNC 530 max./min distance spindle nose/table :1.500/500 mm clamping table:4.500 x 2.000 mm T-slots:22 H8 max. workpiece weight:10.000 kg distance between columns:2.500 mm feed rate X-axis:2-15.000 mm/min feed rate Y- und Z-axis, stepless:2-12.000 mm/min torque of the drives:37 Nm ball screws::- longitudinal (X)-axis, diameter/pitch:63/12 mm lateral (Y)-axis, diameter/pitch:50/10 mm vertical (Z)-axis, diameter/pich:63/10 mm working spindle with automatic milling head UAD::- capacity at 100% load:30 kW transmission ratio:2 turning speed range - stepless:40-5.000 U/min tool taper:SK 50 Pull stud:DIN 69872 Form A Milling h ...

Category: 104: grinding machines
New in: 1992
Price: 24.900 €
Location: Land-de DE D-92655 Grafenwöhr
Seller: KISTNER GmbH & Co.KG

GALA & HOTZ ORION FS 1260 SA Precision surface and profile grinding machine Year of construction: 1992 Machine number: 104990791 Traverse paths: X - 1,200 mm / Y - 650 mm / Z - 525 mm -Vertical automatic, infinitely variable -Electric straight Truing device (dressing width 0-100 mm) -Universal paper machine (cleaning capacity 100 l / min) -Magnetic adhesive force control -Grinding wheel holder for grinding bore 127 mm The machine can be visited by appointment Delivery ex location D-92655 Grafenwöhr / free loading truck Delivery immediate / intermediate sales reserved

Category: 112: gear cutting and hobbing machines
New in: 1987
Price: request quote
Location: ab Werksstandort,unter Strom
Seller: Kemmerich Werkzeugmaschinen GmbH

max. wheel diameter: 315 mm gear width: 200 mm max. module: 10 min. module: 1 number of teeth: 5 - 140 table load: 200 kp grinding wheel diam. min/max.: 270-350 mm max.helical angle: 45 ° no. of strokes: 75 - 315 min-1 root circle diameter: 30 mm tooth width: 160 mm adjustment of stroke: 120 mm stroke length max.: 170 mm min. wheel diameter: 30 mm roll feed: 80 - 800 mm/min electrics - voltage/frequency: 380 / 50 V/Hz total power requirement: 8,5 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 3,3 x 3,8 x 3,7 m Machine is highly accurate with tilting stand for grinding high-precision straight & helical cutting wheels with Head bevel angle, grinding of spur gears with coni ...

Category: 102: lathes
New in: used
Price: 3.000 CHF
Location: Land-ch CH 2735 Malleray
Seller: Herr Ernst J. Schmid

Tool maker lathe base of 380 volts, with easy fixing system for collets, with an additional turret tailstock, in very good condition. Additional accessories as collets, etc. possibly upon request and for separate billing. Supplied as shown.

Category: 401: filling machines
New in: 2018
Price: request quote
Location: Land-de DE Hamburg
Seller: BluePack Machines GmbH

AMTEC FILLINGsystem - Sample system for volumetric filling and capping Sample system for volumetric filling and capping in one monobloc. Stainless steel SS316, 4 or 8 filling nozzles, volumetric injection pump, automatic cap orientation and capping. Specifications: filling range: 20-1000ml (ideal filling ranges: 20-100ml, 50-250ml, 100-500ml, 200-1000ml) | max. speed of the machine in neutral: 5000 bottles/hour | filling precision less than +/- 1%, yield of capping more than 99% | power: 220V, 1.2-2.2kW | 0.6m³, 6bar | weight: 800-1000kg. - Please note these are sample specifications only. - Please ask for an inquiry and let us know your product details (size, shape, required speed , produ ...

Category: 1300: other machines and plants
New in: 2008
Price: 30.000 €
Location: Land-bg BG 1000 Sofia, Stoyan Chomakov 4a str. Office 57
Seller: Truck Outlet LTD

Designed to meet all metals analysis requirements form routine use to metals research, the ARL 4460 is the solution for ultimate analytical performance in varying laboratory conditions or in hostile environments. Ultimate detection limits, reproducibility and accuracy Speed, accuracy, stability, reliability Widest range of metals analysis Capability to identify and count inclusions and to calculate cleanness indexes The ultimate in performance for spark emission metals analysis to allow rapid, reliable quality control of metals. The ARL 4460 is quite simply the best system for metals analysis produced to date. Two important new capabilities have been added to Thermo Scientific well e ...

Category: 401: filling machines
New in: 2018
Price: request quote
Location: Land-de DE Hamburg
Seller: BluePack Machines GmbH

AMTEC FILLINGsystem - Sample system for small volume bottle filling Samples System to fill small bottles with small volume of liquid: Typical use is filling of eye drops. The system includes an container unscrambler, which sets the small bottles into an infeed line. Module to clean the bottles (water/gas) and inside/outside tucks (cap parts), filling and labelling the bottles. The system is PLC controlled. The total 3 cleaning processes with water plus the 3 cleaning processes with gas assures a very high cleaning standard without any water remaining. All liquid touching parts are made of stainless steel SS316 completely. Specifications: Filling precision: less than +/- 0.5% | max. speed of ...

Category: 1300: other machines and plants
New in: 2007
Price: 5.000 €
Location: Land-bg BG 1000 Sofia, Stoyan Chomakov 4a str. Office 57
Seller: Truck Outlet LTD

The Mitutoyo HV-112 Series 810, 810-163A Vickers Hardness Testing Machine has a wide range of test forces available. Test forces from 1.961N to 490.3N (2kgf-50kgf)and they measure a variety of specimens. The load duration can be set in 1 second increments between 5 and 99 seconds. The minimum reading of indentation is 0.1um. It allows small indentations to be measured with high precision. This machine is new. Never used. Showroom exponent. Net price. Price like new 22 000 USD. Available HV 112 and HV 114 models.

Category: 401: filling machines
New in: 2018
Price: request quote
Location: Land-de DE Hamburg
Seller: BluePack Machines GmbH

AMTEC FILLINGmachine Fully Automatic straight transport Triple Auger Filler 10-500g Fully automatic powder filling system, triple auger-filler unit, straight transport of cans. Functions: automatic container feeding - precision positioning - container lifting - vibration - filling - weighing feedback - sorting - container outfeed. PLC control, precision servo system, dosing technique: screw and load cell feedback, removable glass cover. With Wi-Fi function, remote control and data download system. Easy cleaning, movable conveying platform and recycle funnel. SIEMENS PLC, SCHNEIDER Servo Motor, SCHNEIDER Inverter, AIRTAC pnematics, HBM weighing sensor (Germany). 2 packaging modes: High speed  ...

Category: 208: lacquer machines
New in: used
Price: request quote
Location: Land-pl PL 83000 Pruszcz Gdanski, Nad Radunia 74
Seller: Iberus Woodworking Machinery

Position 1116 Spraying machine Cefla Spraybotic RE 5 Machine no .: 01190 / 2 Working width 20 - 1300 mm Workpiece height 8 – 90 mm Working height 900 mm, +-20mm Feed rate 2 – 6 m/min Workpiece recognition Spray arm with 5 axes Single carriage with arm running on precision sliding guides. Number of installed spray gun 4 pcs. Kremlin ATX Automatic gun cleaning system CFB conveyor belt system with paint recovery unit with belt self-cleaning system, equipped with a suitable paint recovery and cleaning unit. Paint pump Kremlin Type 16 - 120, 96 bar, flow rate 14l / min, ratio 16: 1 Intake air Pressure cabin With controlled ventilation system Extraction rate Compressed air  ...

Category: 401: filling machines
New in: 2018
Price: request quote
Location: Land-de DE Hamburg
Seller: BluePack Machines GmbH

AMTEC FILLINGmachine Fully Automatic straight transport single Auger Filler 10-500g Fully automatic powder filling system, single auger-filler unit, straight transport of cans. Functions: automatic container feeding - precision positioning - container lifting - vibration - filling - weighing feedback - sorting - container outfeed. PLC control, precision servo system, dosing technique: screw and load cell feedback, removable glass cover. Specifications: stainless steel (SS304) version | filling range: 10-500g | accuracy: +/- 0.3-1% | suitable for: metal cans, glass bottles, plastic jar, paper bags, etc. | container dimensions: diameter 40-80, height 60-180mm with different can feeding screws ...

Category: 102: lathes
New in: 2010
Price: request quote
Location: Land-de DE 82140 Olching, Gewerbering 6
Seller: G+S Werkzeugmaschinen

Manufacturer: DMG Model: CTX beta 500 Year of construction: 2010 Control: HEIDENHAIN TurnPlusIT Chuck diameter [mm]: L 250 Turning length [mm]: 400 Spindle transmission rate [mm]: 67 / 52 main spindle: Technology: Integrated spindle motor Speed: 5.000 rpm : KW 34 C-axis: 0.001 ° Spindle passage: 67 mm Cylinder: hollow clamping cylinder Workpiece clamping: Hainbuch Deadlength, Gr. 65 Counter spindle: Technology: Integrated spindle motor Rpm: 6.000 rpm Power: 15 kW C-axis: 0.001 ° Spindle passage: 52 mm Cylinder: hollow clamping cylinder Workpiece clamping: Hainbuch Deadlength, Gr. 65 Tool carrier (x/Y/Z): Technology: Star revolver with 12 stations, Fabr. Sauter T ...

Category: 401: filling machines
New in: 2018
Price: request quote
Location: Land-de DE Hamburg
Seller: BluePack Machines GmbH

AMTEC FILLINGmachine Fully Automatic straight transport single Auger Filler 10-1500g Fully automatic powder filling system, single auger-filler unit, straight transport of cans. Functions: automatic container feeding - precision positioning - container lifting - vibration - filling - weighing feedback - sorting - container outfeed. PLC control, precision servo system, dosing technique: screw and load cell feedback, removable glass cover. Specifications: stainless steel (SS304) version | filling range: 10-1500g | accuracy: +/- 0.3-1% | suitable for: metal cans, glass bottles, plastic jar, paper bags, etc. | container dimensions: diameter 40-130, height 80-220mm with different can feeding scr ...

Category: 703: meat and fish processing machines
New in: used
Price: request quote
Location: Land-rs RS 15224 Mala Vranjska bb, Mala Vranjska bb
Seller: Sind

Micro cuter KARL SCHNELL 37 kw

Category: 401: filling machines
New in: 2018
Price: request quote
Location: Land-de DE Hamburg
Seller: BluePack Machines GmbH

AMTEC FILLINGmachine Fully Automatic straight transport Double Auger Filler 10-5000g Fully automatic powder filling system, double auger-filler unit, straight transport of cans. Functions: automatic container feeding - precision positioning - container lifting - vibration - filling - weighing feedback - sorting - container outfeed. PLC control, precision servo system, dosing technique: screw and load cell feedback, removable glass cover. With Wi-Fi function, remote control and data download system. Easy cleaning, movable conveying platform and recycle funnel. SIEMENS PLC, SCHNEIDER Servo Motor, SCHNEIDER Inverter, AIRTAC pneumatics, HBM weighing sensor (Germany). 2 packaging modes: High Spee ...

Category: 106: presses
New in: 2001
Price: request quote
Location: Land-de DE
Seller: Silicon plus

Bruderer BSTA 180U precision high speed punching press. Year of manufacture 2001. Made in Switzerland. Electric drive with frequency inverter. PLC controls. 18 tons nominal capacity (180 kN) 8 to 40 mm variable stroke. Speed range 100-1400 SPM max. Bolster area 480 x 374 mm. Max tool loading width 359 mm L-R. BBV 190/85 roll feed mounted on left-hand side. Max width of strip 160 mm. Max feed length variable up to 85 mm max. Feed angle 180°. End of strip monitoring electronic. Power supply 400 Volt, 50 Hz. Weight of machine approx 1850 kgs. Oil cooler. Spring feet dampers. Safety guards front and rear.

Category: 112: gear cutting and hobbing machines
New in: 1999
Price: request quote
Location: ab Werksstandort,unter Strom
Seller: Kemmerich Werkzeugmaschinen GmbH

max. wheel diameter: 315 mm gear width: 200 mm max. module: 10 min. module: 1 number of teeth: 5 - 140 table load: 200 kp grinding wheel diam. min/max.: 270-350 mm max.helical angle: 45 ° no. of strokes: 75 - 315 min-1 root circle diameter: 30 mm tooth width: 160 mm adjustment of stroke: 120 mm stroke length max.: 170 mm min. wheel diameter: 30 mm roll feed: 80 - 800 mm/min electrics - voltage/frequency: 380 / 50 V/Hz total power requirement: 8,5 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 3,3 x 3,8 x 3,7 m Machine is highly accurate with tilting stand for grinding high-precision straight & helical cutting wheels with Head bevel angle, grinding of spur gears with coni ...

Category: 102: lathes
New in: used
Price: request quote
Location: Land-fr FR 73520 Saint Béron, Lieu dit Le Sourd
Seller: SARL Kraffter

Schaublin 70 precision lathe with accessories : -70-31 / 1 headstock W12 type spindle, -70-12 / 1 bed, -70-80 / 1 cast-iron base, -71017 / 1 commutating switch, -70-81.030 / 1 coutershaft with clutch and brake, -70-80.400 / 1 swivel drawer for accessories, -70-65 / 1 screw-operated tailstock, -70-30.600 / 1 manual lever-operated quick-closing attachement (for W12 collets), -70-45 / 1 screw operated-carriage, -70-10.100 / 1 rod for fixing of the carriage, -1 three-phase motor 750/3000 [rpm], -102-80.500 / 1 footrest with pedal-operated reversing switch 71025, -77 collets type W12 from Ø0.50 to Ø12.00 [mm], -70-87.300/450 / 1 milling attachement (high support) W12 spindle  ...

Category: 1900: general inventory
New in: used
Price: used machinery auction RESALE 80 €
Location: Land-de DE Germany, 85055 Ingolstadt
Seller: Surplex GmbH

Weight approx.: 250 kg Dimensions (l x w x h) approx.: 2000 x 1250 x 1000 mm Description: consisting of 3 different trolleys, precision scale with a surface of 160 x 180 mm, medium-sized scale with a surface of 500 x 400 mm, large scale with a surface of 1500 x 1250 mm

Category: 202: milling machines
New in: used
Price: request quote
Location: Land-de DE 37242 Bad Sooden-Allendorf, Werrastr. 20
Seller: Wilhelm Bachmann GmbH & Co.KG

At length saw diameter. 300 mm Milling spindle diameter. 40 mm Sliding table with Festo length stop Dust nozzle saw 120 mm dto. Precision part 140 mm Cable + plug 16 amp. without bed.-tool

Category: 903: machines for soil cultivation, sowing and harvesting
New in: used
Price: 6.800 €
Location: Land-de DE -
Seller: Fritz Brandt Landmaschinenhandel

; Accessories: Reihenanzahl (4-reihig), Maisausrüstung

Category: 813: presses: webfed commercial
New in: 1985
Price: request quote
Location: Land-uk UK BH243 Ringwood, The Stables, The Stables,
Seller: Jerry Curtin Limited

We are pleased to offer: Atlas Blumer D-18 Label Punch 1985. Serial Number: 4032184 This manually loadable machine is known for its top precision, User-friendliness, optimum safety and nevertheless maximum performance. Thanks to its compact and stable design, The D-18 is not only the ideal machine for labels and card producers, Which have a small to medium quantity range, but also for printers. Who have to efficiently and accurately bring its pre-cut paper or plastic products. in shape” according to special customer wishes. Label size: pre-cut label size minimum 24x45mm-150x180mm maximum die cut size minimum 20x40mm-145x175mm Stack height min/max-30/120mm Minimu ...

Category: 103: milling machines
New in: new
Price: request quote
Location: Wiener Neudorf
Seller: HESSE+CO GesmbH

: 360 x 1.400 mm : 18 x 63 mm : 250 kg : 50 ISO : 370 mm : 45 ± ° : 5,5 kW : 75 mm : 13 kVA : 2.995 mm : 2.000 mm : 2.100 mm : 2.860 kg Vertical knee-type milling machine FGV 32 The FGV32 type is a high efficiency production milling machine with vertical spindle. It is designed for precision and productive milling of flat or box-section workpieces up to 250 kg weight occurring in the one-off or batch production. The wide range of spindle speeds and feeds enables effective milling of all metals with tools made from a high speed steel or a hardmetal Using of the optional equipment from our variety entlarges technological possibilities of the machine. Advantages:  high rigi ...

Category: 109: other metal working machines
New in: used
Price: request quote
Location: Land-se SE Hässleholm
Seller: Hilco

5 work stations: Punching (550T); Notching; Shear of iron section L; Shear of flatbar; Cut of round and square bars; Machines driven by two cylinders; 5 work stations, fitted with tools for L , shearing, round and square bars, rectangular notching and punching; Quick change punch; Flat bar shearing table with adjustable guides; 2 simultaneous work stations; Greater speed backed by a powerful hydraulic unit; Special equipment for approaching at reduced pressure and slow speed; Precision punching table with X & Y measuring stops; Precision notching table with X & Y measuring stops;

Category: 104: grinding machines
New in: 1985
Price: used machinery auction RESALE 4.000 €
Location: Land-de DE Germany, 70191 Stuttgart
Seller: Surplex GmbH

Weight approx.: 8700 kg Dimensions (l x w x h) approx.: 4000 x 2500 x 3000 mm Description: - machine no.: 208023 - operating voltage: 380 V, 50 Hz - total connected load: 17,3 kW - with ABA digital read out - max. grinding length: 1000 mm - max. grinding width: 600 mm - max. working height with new/used grinding disc: 700/775 mm - grinding spindle diameter: 70 mm - grinding spindle movement vertical: 730 mm - grinding spindle movement horizontal: 550 mm - table clamping surface: 1500 x 500 mm - number of clamping slots: 3 - distance between slots: 150 mm - slot width: 14 mm - table longitudinal movement: 1100 mm - max. table load: 1150 kg - grinding disc dimensions: 400 x 127 mm - electric m ...

Category: 703: meat and fish processing machines
New in: 2013
Price: request quote
Location: Land-uk UK DN10 Doncaster, unit 4, west stockwith business park,
Seller: UFM

Vemag Vacuum filler Model: Robot 500 Serial: 1284628 2013, for precision portion production of rye / wheat doughs, shortcrust pastry, cake and batter mixes, 100Kg hopper with scrape surface, comes with both pneumatic cutting device and also comes with dough portioning sheeting attachment

Category: 102: lathes
New in: 1991
Price: used machinery auction RESALE 3.350 €
Location: Land-de DE Germany, 73235 Weilheim Teck
Seller: Surplex GmbH

Weight approx.: 6250 kg Dimensions (l x w x h) approx.: 5000 x 2500 x 2200 mm Description: - turning diameter max.: 240 mm - turning length: 630 mm - control system: Traub TX 8D - swing diameter over cross support: 450 mm - swing diameter over cross slide: 320 mm - main spindle: max. speed 4.000 rpm - drive power - main spindle: 42 kW - max. torque value: 270 Nm - max. bar diameter: 80 mm - spindle head: KKA-8 DIN 55026 - spindle bearing diameter: 130 mm - C-axis: 2,5 ° - input precision: 0,001 ° - max. chuck diameter: 250 mm - tool turret: number of tool places:12 - number of driven tools: 6 - shaft diameter: DIN 69880: 40 x 63 mm - turret switching time: 0,6 / 0,15 sec. - speed range - d ...

Category: 104: grinding machines
New in: used
Price: request quote
Location: Land-de DE 04838 Eilenburg, Walther-Rathenau-Str. 24
Seller: ZOMA Maschinenhandel

Mikrofinishingmaschine, microfinishing machine, used gebrauchtTyp: MA 3/1000Hersteller: Thielenhaus machine factory WuppertalSteuerung: manually, konv. maximum part size / max. worksize: d = 155 mmMax. 310 part length / max work.length: mmGenauigkeit / precision: 0.001 mmLeistung / load: 12.4 kW, 380/400 ~ specification: stock finish. grinding wheels Floor finishing tools including Machine application: high-precision surface grinding of piston pin

Category: 109: other metal working machines
New in: 2000
Price: used machinery auction RESALE 2.700 €
Location: Land-de DE Germany, 73235 Weilheim Teck
Seller: Surplex GmbH

Weight approx.: 2000 kg Dimensions (l x w x h) approx.: 2700 x 1200 x 2200 mm Description: - serial no.: S9M625-11-3-3 - loading capacity: 100 kg - repeatability precision: +-0,5 mm - working range: S-axis: +-180°, L-axis: +90° up to -45°, U-axis: +10° up to -90°, T-axis: +-350° - with documentation and safety backup

Category: 843: paper converting: laminating and coating
New in: 2007
Price: request quote
Location: Land-pl PL 30199 Krakow, Strugi 18
Seller: TOP GRAPHIC MACHINERY

Automatic laminator Lamina 1621 BL ref 2159EU Year - 2007 Max size - 1600 x 2000 mm Min size - 300 x 300 mm Top sheet - 130 - 450 gm/m^2 Bottom sheet - from 250 gm/m^2 Precision gluing unit with automatic glue application Laminating station with automatic front and side registration system Automatic top sheet feeder Automatic bottom sheet feeder PLC control system Pressure belt

Category: 109: other metal working machines
New in: 2000
Price: used machinery auction RESALE 2.700 €
Location: Land-de DE Germany, 73235 Weilheim Teck
Seller: Surplex GmbH

Weight approx.: 2000 kg Dimensions (l x w x h) approx.: 2700 x 1200 x 2200 mm Description: - serial no.: S9M625-11-3-4 - loading capacity: 100 kg - repeatability precision: +-0,5 mm - working range: S-axis: +-180°, L-axis: +90° up to -45°, U-axis: +10° up to -90°, T-axis: +-350° - with documentation and safety backup

Category: 101: boring mills and machining centers
New in: 2001
Price: 29.000 €
Location: Land-fr FR 67500 HAGUENAU, 20 RUE AMPERE
Seller: SOCIETE FIMOTEC

M Machine type machining center - horizontal brand MAZAK type FH 4800 year 2001 control type CNC storage France country of origin Japan delivery immediately cargo base stock technical details x way 560 mm y way 630 mm z-way 600 mm control FUSION 640 M workpiece diameter 630 mm distance horizontal spindle / table min. 80 / 710 mm of maximum table load of 400 kg number of pallets 2 pallet size 400 x 400 mm B - axis 0.001 ° speed 35 ~ 12,000 rpm Drive power - spindle motor 30 / 22 kW bearing diameter 80 mm pallet change time 5 sec number of tool magazine stations 40 recording BT 40 tool diameter 95 mm max Werkzeugdurch. free neighboring box. 150 mm maximum tool length 360 mm of maximum t ...

Category: 105: saws
New in: 2013
Price: request quote
Location: Standort
Seller: IMZ Maschinen Vertriebs GmbH

saw blade diameter: 370 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 100 mm : 180x100 mm Working height: 925 mm saw blade turning speeds: 17 - 70 U/min Control: CNC total power requirement: 3,0 kW weight of the machine ca.: 0,8 t dimensions of the machine ca.: 1,9 x 1,45 x 2,1 m Machine has only 24 working hours / 3000 cut The right roller conveyor is included, the left roller conveyor remains with the Dispenser. High Performance Vertical Circular Saw Hydropneumatic Fully Automatic · Miter left 60 ° + right 45 ° · Hydro-pneumatic control of the saw unit · Electro-pneumatic material feed unit · Smooth, powerful worm drive with large Gear ratio, integr ...

Category: 107: sheet metal working
New in: 2009
Price: request quote
Location: Land-de DE
Seller: Beppo Bercht Werkzeugmaschinen

Electronic bending angle control with automatic eight-fold angle rotation Maximum pipe diameter 50 mm Maximum bending radius 150 mm bending speed 20°/s bending precision +/-0.2° dimensions L/W/H 2,300 mm / 800 mm and 1.200 mm weight approx. 450 kg Power 1.7 kW Accessories: bending jaws and bending mandrels in the field of diameter 6 mm - 42.4 mm in accordance with separate installation

Category: 105: saws
New in: 2011
Price: used machinery auction RESALE 50 €
Location: Land-ch CH Switzerland, 9443 Widnau/SG
Seller: Surplex GmbH

Weight approx.: 10 kg Dimensions (l x w x h) approx.: 500 x 500 x 700 mm Description: 230 V, 1200 W, 4700 rpm, saw blade 210 x 30 x 2,5 mm, rotary table with precision angle adjustment from -45° up to +45°, saw head tiltable to left-side from 0 up to 45°, locked position at 15, 22, 5, 30, 45, 90°, collection bag for chips

Category: 211: veneer machines
New in: 1997
Price: request quote
Location: Land-de DE 73433 Aalen , Im Letten 2/1
Seller: Kauz Maschinenhandel GmbH

No. 04144 Gluing press / edge gluing press HESS professional 2001 D used, BJ. 1997, very good condition double-sided, hand-hydraulic with a total of 5 vertical press bar, 2 holders for manual implementation with spindle clamp, for working heights up to 1500 mm 5 hand pressure cylinders, 5 rests, 2 austeckbare hinged pendant pressure plate for the pressing of workpieces up to 30 ° Working width 3500 mm, height 2500 mm The HESS professional 2001 is D for the gluing of edges, boards, plates and block gluing Bolted frame construction made of precision profiles. Smooth sliding vertical pressure bar on large ball bearing carriage. QuickSet allows in 500 mm Hess-special grid syst ...

Category: 1900: general inventory
New in: used
Price: used machinery auction RESALE 20 €
Location: Land-de DE Germany, 85055 Ingolstadt
Seller: Surplex GmbH

Weight approx.: 2 kg Dimensions (l x w x h) approx.: 300 x 100 x 100 mm Description: with micrometer screw and dial gauge, precision 0,5 micron

Category: 105: saws
New in: used
Price: request quote
Location: Land-de DE 64711 Erbach, Illertstr. 14
Seller: HORST WOLFF Werkzeugmaschinen

Power: 4 kW, 400/50DR, with engine brake, connection: 16 A, 380 V, speed: 2800 RPM blade diameter: 250/315 mm, shaft diameter: 30 mm, swivelling range of the saw blade: up to 45 °, be hem length: 2.05 m, carriage 0.25 x 2.10 m, duplex adjustment system for precise height and angle adjustment of the blade., precision longitudinal-stop with turning stop Rails and magnifying glass, cross cutting teaching, hem device, extension table, extension table abschwenkbar, slide rail with hardened balls, cross table with Swing-arm and stop Rails, manuals, dimensions: 1100 x 2100 x 1200 mm, weight with accessories: approx. 400 kg

Category: 109: other metal working machines
New in: used
Price: used machinery auction RESALE 50 €
Location: Land-fr FR France, region Nord
Seller: Surplex GmbH

Weight approx.: 60 kg Dimensions (l x w x h) approx.: 730 x 400 x 740 mm Description: Measuring machine, High precision vertical comparator: yes - Table dimensions: 185mm - Measuring accuracy: 0 to 190mm - Micrometer with 2 columns: yes - Auxiliary table for indoor measurement: yes - Table diameter: 280mm, Stock number 53328

Category: 203: planing machines
New in: 2014
Price: request quote
Location: Land-de DE 73433 Aalen , Im Letten 2/1
Seller: Kauz Maschinenhandel GmbH

No. 04145 Planer Thicknesser SCM / wood force FS 41 elite Tersa Year 2014, as new Approx. 10 hours Minimax elite - the heavy machines line of craft and industry leading-edge technology of the SCM group with TERSA Planer blade quick-change system for instant Planer blade change Drum ø 87 mm / Tersa knife 4 piece Surface Planer: Total length of tables: 2,000 mm Task length: 1.034 mm Table height: 870 mm Working width: 410 mm Serrated table lips Depth of cut: Max 5 mm Thickness Planer: Thicknessing table dimensions: 775 x 423 mm Working height: min. 3 / max. 230 mm Speeds: 6 / 12 m / min Speed: 5,200 1/min Motor power: 5 kW / 400V oblique steel fe ...

Category: 1300: other machines and plants
New in: 1986
Price: used machinery auction RESALE 3.400 €
Location: Land-de DE Germany, 15711 Königs Wusterhausen
Seller: Surplex GmbH

Weight approx.: 2000 kg Dimensions (l x w x h) approx.: 1850 x 1370 x 1800 mm Description: For sawing of workpieces up to 127 mm diameter and 610 mm length max. 1800 rpm crystal size 127 x 610 mm saw blade 558 x 203 mm saw feed stroke 150 mm feed speed infinitely variable 6 to 250 mm return adjustable up to 250 mm/min precision at max. feed over 5 µm horizontal adjustment +/- 10° vertical adjustment +/- 7° thickness adjustment 0 to 10 mm, 1 µ-steps thickness accuracy less than 5 µm manual adjustment 90 mm/min coolant up to 19 l/min Please note special pick-up times: only 3 days The buyer will be charged for the costs of stock transfer .

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)