precision used for sale

bore capacity in steel (diameter): 32 mm x-travel: 510 mm y-travel: 240 mm table-size: 820 x 240 mm spindle taper MT: 3 mx. distance bet.vert. milling head and table: 445 mm bore depth: 130 mm max. distance between table and spindle-nose: 455 mm turning speeds: 75-3200 U/min transmission ratio: 12R/12L head swivability: 45 ° quill stroke: 130 mm : 400 V total power requirement: 0,75 kW weight of the machine ca.: 360 kg dimensions of the machine ca.: 920 x 740 x 1000 mm solid column to avoid vibration gear wheels in oil bat left and right turning precision setting for milling depth with drawbar (M12) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mm x-travel: 510 mm y-travel: 240 mm table-size: 820 x 240 mm spindle taper MT: 3 mx. distance bet.vert. milling head and table: 445 mm bore depth: 130 mm max. distance between table and spindle-nose: 445 mm turning speeds: 75-3200 U/min transmission ratio: 12R/12L head swivability: 45 ° quill stroke: 130 mm : 230 V total power requirement: 1,1 kW weight of the machine ca.: 360 kg dimensions of the machine ca.: 920 x 740 x 1000 mm ?solid column to avoid vibration ?gear wheels in oil bath ?left and right turning ?precision setting for milling depth ?with drawbar (M12) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning speed range: 3000 U/min drive motor: max. 25,7 kW tool adaptor: ISO 50 distance spindle - column: 417 mm Torque: 1370 Nm Technical specifications Automatic clamping of the tool, driven by a hydro-mechanical system at 80 bar. Spindles and gears are made of case-hardened and tempered chrome-nickel. Spiral bevel gears, Klingelnberg system with ground tooth flank. High-precision bearings. Standard DIN-2080 / 69871 taper tool – Drawbar DIN-69872. Consult for others. Wide range of performances and applications. Blowing of taper for cleaning. Cooling of bearings of the spindle (4000 rpm) External cooling of tool or internal AD-type cooling, with rotary joint. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Draw spindle precision lathe Fabr. WMW Mikromat Dresden Type DZFG 200 x 500Fabr. -No: 7960, year of construction approx. 1986Technical specifications:Tip width 500 mmTop height 165 mmgr. circulation diameter over bed 315 mmGr. orbital diameter over cross slide 200 mmTurning length between the tips 560 mmgr. workpiece diameter for bar work 31 mmGr. chisel cross section 20 x 20 mmPassage of fixed set stick 100 mmPassage of the walking stick 70 mmgr. workpiece mass between the tips 50 kg9 spindle speeds 56 - 2800 rpmRotary feeds with increments of 1.25xa0xa0xa0longitudinal 0.02 - 0.8 mm / revxa0xa0xa0plan 0.02 - 0-4 mm / revThread feeds metric thread lengthwise 0.2 - 60 mm / revxa0xa0xa0plan 0.2 - 30 mm / revInch thread lengthwise 60 - 1/2 Gg / xa0xa0xa0plan 60 - 1 Gg / Module thread lengthwise 0.1 - 28 mm / revxa0xa0xa0plan 0.1 - 14 mm / revDiametrical pitch thread lengthwise 240-1 3/8 Gg  ...

Precision Die Sinking Machine Fabr. MD PRONTO Dieburg Type 50.35Fabr. -No: 0-1.9.7, built in 12/1990Work table length x width: 650 x 350 mmMax. Workpiece dimensions Length x width x height: 900 x 550 x 400 mmTravel across X: 350 mmTravel length Y: 300 mmVertical travel Z: 180 + 200 mmMax. Travels of work table and machining head: 450 mmMachine weight approx. 1300 kgrequired footprint: 2700 x 1550 x 2450 mmExternal dimensions of the machine: 1280 x 1300 x 2100 mmTank size: 1100 x 550 x 400 mmTank volume: 240 l:With- Digital display- Depth shutdown- CO2 fire extinguishing system Gloria- Clamping system Hirschmann- separate power supplyas new, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available ...

CNC hydraulic guillotine shears FAbr. HACO HSLX 4010brand newTechnical specifications:Max. Cutting length: 4050 mmMax. Sheet thickness for ST 4 10 mmMax. Sheet thickness VA (1.4301): 6 mmTable height: 1030 mmCutting angle: 0.5 - 3 degreesCutting gap adjustment: 0.05 - 1.0 mmNumber of hold-down devices: 23Back stop area: 1000 mmBackgauge speed: 110 mm / secStroke rate: 7-11Working height: 1030 mmrequired oil filling: 220 litersLength of the angle stop: 1000 mmHolding device option: 7780, -Length of the support surface: 930 mmMax. Sheet thickness: 8 mmMotor power: 18.7 kWOption control panel on the swivel arm: 930.00Machine dimensions: 5150 x 2050 x 2395 mmWeight: 13 tWith- SC 100T controlwith ergonomic control panel - simple operation directly on the cutting table- enables convenient operation ofBackgauge, retraction and cutting length limitation- Electronic cutting gap adjustment - Cutti ...

ully automatic wood copy milling machine make REICHENBACHER type KS225Make -No: 1182, year of construction 10/1994 with Siemens OP 393 III controlSimultaneously mills and grinds two small parts with complicated shapes, such as tobacco pipes, golf club heads, sports pistol grips, wooden shift levers, etc.Technical specifications:machine constructionStable frame construction in a closed, against dust andNoise-encapsulated housing. Upper area of the front with gas pressure springHinged door, with security window.machine equipmentTo craft 2 copies of a model at once, you have:2 milling spindles each with a milling head dia. 240 mm (equipped with HS steels), via flat belts jointly driven by motor 2.2 kW; number of milling spindles 7200 rpm; Direction of rotation right.2 grinding units each with a 120 mm wide endless grinding belt, together with a 0.75 kW motor driven; belt speed 13 m/s; wi ...

Pellet mill for ring DIE and two roll shell system. Inside diameter: 900 mm Active operating width: 138mm Active forming area: 3902 cm² Press roll Ø440/142 optionally dimpled or notched Front door Stainless steel front door with large opening angle. pneumatic operated overload bypass protection gate. Two knives with step less length adjustments integrated in the door. Machine housing All housing parts are cut by precision laser. The machine base, the base plate and the housing are welded and reinforced. Drive Drive via 355 kW-1200 rpm engine , timing belt Ø200/1900 - Beltdrive Motor and Motor cables not included. Equipment Central lubrication for roll assembly and main shaft Manual roll adjustment Overload protection provided by a safety pin Die of chrome steel X46 Cr13 with conical seat for an easy change of the die - Die is not included Adjustable defle ...

grinding length: 500 mm grinding width: 200 mm workpiece height: 250 mm total power requirement: 5,5 kW weight of the machine ca.: 2500 kg dimensions of the machine ca.: m J U N G Horizontal High Precision Surface- and Profile Grinding Machine Model HF 50 RD, Year 1969, partially reconditioned in 2021 Serial-no. 4082 _________________________________________________ Grinding length max. 500 mm Grinding width max. 200 mm Table size 600 x 200 mm Grinding height under grinding wheel approx. 250 mm Table cross travel approx.. 230 mm Table slide cross stroke 0,2 - 8 mm/table stroke Table longitudinal travel max.. 550 mm Table speed longitudinal 1 – 20 m/min. Measurement of grinding wheel 225 x 25 x 51 mm Grinding wheel speed infinitely adjustable 1.000 ...

Bihler RM 30 E punch bending machine Bihler RM 30 E punch bending machine for the production of stamped and bent parts made of strip and wire. Compact machine system for the production of precision stamped bent parts User-friendly machine and process control Bihler P CNC 400 Compatibility with RM 35, RM40 and RM4 tools Year of construction 2003 Machine housing and perforated plate Specifications Machine power: 5 - 400 strokes/min Feed length: max. 240 mm Backing edge of the strip: max. 80 mm in front of perforated plate Strip bottom edge: 4 mm above center machine Material dimensions: strip width max. 60 mm, wire Ø max. 4 m Material feeder right (176-05-00195.0) 240 mm feed length Specifications Material trailing edge: 80 mm in front of perforated plate Material bottom edge: 4 mm above center machine Material width: max. 60 mm Feed length: max. 240 mm  ...

x-travel: 650 mm y-travel: 450 mm workpiece height: 585 mm Control: ADCOS CNC 400 total power requirement: 15 kW weight of the machine ca.: 5000 kg dimensions of the machine ca.: m H A U S E R (Switzerland) CNC Controlled Hi Precision Double Column Jig Grinder Model S 40 – CNC 311 / ADCOS 400 CNC Year 1981 / CNC modernized in 2008 # 0126 _____________________________________________________________________ Table size approx. 630 x 770 mm Table load capacity approx. 500 kg Table travel longitudinal max. (X) 650 mm Grinding head slide cross max. (Y) 450 mm Vertical adjustment of cross rail max. (W) 500 mm Grinding spindle stroke max. (Z) 140 mm Stroke number of grinding head (4cycles) 0,5-12 m/min. Vertical distance between Table/grinding spindle 0-585 mm Dista ...

- Year of manufacture 2009 | First Installation November 2009 - Total A3 sheets printed: approximate 26.4 million (status from June 2022) - Electrography using dry toner - 5 x High-Precision LED-Printing Heads (CMYK + White) - Standard Unwinder for rolls with 600 mm diameter - Rewinder - Media Width: 200 mm – 330 mm | Printing Area: max 322 mm x 55 m - Media Weight: 40 - 350 gsm (40 - 550 microns) - Web Speed 4/C: Up to 19.2 m/min. (Paper up to 350 gsm) - Printing Speed: up to 380 sqm/hour - Resolution: true 1.200 dpi at 4 bit (1.200 x 3.600 dpi addressability) with variable dot density - Substrates: SA or PS Label (Paper, PP, PET, Vinyl, co-extruded film), Paper, Paperboard, Transfer substrate - Digital Front-End X 800 with Control PC and 2 monitors - Xeikon Software X 800 Voyager with options Barcode and Seq Number - Machine is still under Xeikon Gold Service Contract  ...

Chilworth JCI 164 High Voltage Adapter General description The JCI 146 is a voltmeter adapter component designed for integration into wider experimental systems. In combination with our JCI 140, the system enables the measurement of live conductors with voltages up to ± 60 kV DC by direct connection with an accuracy of ± 2% (nominal) with minimal load effects on the device under test. The JCI 146's high input impedance and low capacitance are suitable for more accurate DC voltage measurements. Other traditional techniques for directly measuring high voltages (e.g., high-voltage meters, capacitive and resistive divider networks, etc.) often provide inaccurate results due to load effects caused by the measurement setup. This device can be used to cross-check the calibration and accuracy of high-voltage sources by power utilities, calibration test houses and cable manufacture ...

BOVONE ELB 10/45 glass bevelling machine built in 2004 in Italy, is used in the process of grinding flat and inclined edges made of glass. Glass with a thickness between 3 and 30 mm is processed with the highest precision and accuracy using ten spindles. Exceptional stability during machining is ensured by a structure made of top-quality cast iron. The glass bevelling machine is maintained on an ongoing basis – in 2021, it underwent an extensive service during which components such as bearings on the spindles or cofferdam brushes were replaced. The glass edging machine is equipped with an infeed and outfeed conveyor with a load capacity of 800 kg. The machine weighs 4,200 kg. Technical specifications of the BOVONE ELB 10/45 glass straight line edging machine - number of spindles: 10 - minimum thickness of glass: 3 mm - maximum thickness of glass: 30 mm - minimum dimensions of ...

DOOSAN DNM 4500 CNC milling machine built in Germany in 2019 is used for drilling, milling or threading workpieces weighing up to 600 kg. Machining is performed in the X,Y,Z axes on a working table with dimensions (L x W) of 1000 x 450 mm. The vertical machining centre characterised by excellent precision and exceptional machining quality, will satisfy even the most demanding customers. Noise and vibrations occurring during machining are reduced thanks to the use of a high-performance direct drive spindle operating at speeds in the range from 80 to 8000 revolutions per minute. The tool magazine can store up to 30 tools, and they are changed in a very short time of just 1.2 seconds. The machining centre is also equipped with among others, through-spindle coolant, a lubrication system and an extremely efficient and reliable FANUC 0iMF CNC controller, ensuring full control of the mill ...

RUIAN QUEENSENSE MACHINE DHB-500 film glove production line manufactured in 2020 by Chinese company RUIAN QUEENSENSE MACHINE CO.LTD. is used to produce double-layer foil gloves. The produced gloves, used for example in grocery shops or in production, guarantee effective protection against viruses and bacteria. The QUEENSENSE DHB-500 automatic disposable gloves production line consists of two identical machines, both of which feature a central drive to control all glove-forming mechanisms. The dual unwinding station is equipped with a clutch, which allows infinite adjustment of the film tension and dual inverters for unwinding control. High-precision feeding of HDPE or LDPE material to the sealing position and the final product sorting point is ensured by the installed servo drives controlling the entire process. After changing the heat sealing dies, the RUIAN QUEENSENSE MACHINE DHB ...

Agitator RW151000300: 1.5 KW – 1000 rpm. Electric motor: Electric motor Siemens or WEG 1.5 KW, 6-pole, 3 x 230/400 Volt, 1000 RPM, IP55. Weight approx. 30 kg. With motor protection plug. Suitable for frequency converters. Shaft: precision stainless steel shaft D30, length 1000 mm, diameter 30 mm, Material stainless steel 1.4571. With rigid coupling stainless steel 1.4301. Agitator: 4-leaf inclined blade stirrer diameter 300 mm. Material 1.4571. Suitable for larger containers of breweries, dairies etc.

Type: RL80 Description: Reis Robotics Manufacturer: Reis Colour: Red Condition: very well maintained, like new Bearing load: 80 kg Weight: 1.200 kg Repeat precision: +/- 0,1 mm  Number of axes: 3

LOADS Load: 70 kg Additional load: 20 kg WORKING RANGE Max. range: 1720 mm ADDITIONAL DATA Number of axes: 4 Repeat precision: +/- 0,1 mm Weight: 1050 kg to 1200 kg

Single roller chain new 1 1/4" x 3/4 RØ 19.05mm approx. 50 m Precision roller chain simplex, standard chain European design according to ISO-R606/DIN 8187 round Chains ISO/DIN: 20B-1 Weight: 3.72 kg Price per meter EUR 8.00 approx. 50 m available Surcharge for custom cutting EUR 20.00 Subject to change, error and prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

Butter Forming & Wrapping Machine Manufacturer: BENHIL Type: 8380 Working hours: 0 since reconditioned Capacity: 40... 90 Pa./min, infinitely adjustable Products: Butter, Margarine etc Choose Format: 250 gr. (100x70x35 mm) Folding: bottom folding Packing material: aluminium foil, parchment paper Dosing: volume doser from 100 .. 300 gr. Dosing precision: +/- 1 % Energy: 380 V/50 Hz; 2,2 KW Weight: 1.600 k

Thyssen measuring plate / control plate made of natural hard rock Length: 3000 mm Width: 1500 mm Thickness: 300 mm Flatness tolerance according to DIN 876/0 Target value 16 μm Actual value 13.3 μm Identification number: 14286 2 x T-groove with base 6 x Wenzel Precision roll-off trestles Concentricity tester with height adjustment heavy design With T-groove stones High accuracy due to backlash-free rolling bearings Roller trestle can be adjusted in height for diameter compensation. RRP Pair 1890,-€ Item location: 42859 Remscheid Dismantling and transport by the buyer. The dismantling, loading, as well as transport can alternatively be offered by us.

SINO NCP 160 eccentric press built in China in 2018 by Sino Machinery & Tools (Dongguan) Co., LTD. performs machining of metal workpieces with a press force of 160 tonnes. The machine is equipped with high-quality components, including e.g. a 100 mm adjustable slider making up to 25 to 55 strokes per minute, and a YU JAIV PDH-120 indicator displaying the distance of the die between the table and the slider. The large working area, ease of operation and outstanding precision, guarantee excellent machining results. The press offers the possibility of combining it with an automatic feeding system in order to increase the number of parts produced and significantly reduce costs. The total weight of the machine is 13 tonnes. Technical data of the SINO NCP 160 press - maximum press force: 160 t - work area dimensions (L x W x H): 910 x 600 x 410 mm - bolster dimensions (L x W x H): 125 ...

Available for sale 2 x NEVER USED Leroy Somer Automatic Voltage Regulator R713. The 3F R713 or R723 modules are used in connection with a R200 series regulator for equalizing the voltage of an alternator with that of the network before coupling, when the installation operates automatically or when manual equalization of these voltages is not possible. This prevents excessive current caused by coupling a network to the machine when both are not at the same voltage. This difference in voltage is usually due to fluctuations in the network voltage because the alternator is regulated at a constant voltage except for cases of voltage droop). On some networks these fluctuations can reach ± 10%. Equipment never used and in good working conditions. Consumption: < 2VA Response time: < 300 ms Dissipated power: < 1W Temperature Shift: 1% of Un for delta T ambient variing from -20° to 2 ...

AMG S820 plasma-gas cutting machine built by the Taiwanese company ASIA MACHINE GROUP in 2013, is used for precision cutting of workpieces made of carbon steel and acid-resistant steel. The machine characterised by a robust and high-quality construction has two torches – a HYPERTHERM plasma torch with THC voltage height adjustment and collision protection, and a KOIKE gas torch with functions for automatic piercing. The plasma cutting machine performs workpiece cutting processes on a large work table of surface area (L x W) 6100 x 2500 mm with an additional laser pointer to facilitate workpiece positioning on the table. In order to eliminate any contamination generated during laser and gas cutting, the usual exhaust extraction has been replaced by an waterbed table powered by water with a pressure of up to 2 bar. The water mirror in the table’s bath effectively absorbs the exhaust ...

Bruderer Automatic Precision Punching Press. Type: BSTA 110H. Max. Pressure: 1100 kN (110 T). Speed range: 100 – 800 spm. Year of production: 1976. Fitted with roller-gripper feed unit BBV 320/200 on left-hand side. Max. strip width: 400 mm. Max. strip thickness: 12 mm. Max. feeding pitch: 200 mm. Adjustable stroke: 16-75. Ram height adjustment: 89 mm. Max. Tool width clearance between columns: 1170 mm. Weight of machine: cca. 26000 kg. Electrical cabinet and control. Oil pump. Oil cooler. Fitted with spring feet dampers. Front and rear safety guards with inspection glass.

High precision drilling and milling machine Aciera 22 VA Good condition from school operations Year of construction approx. 1990 Table 600 x 320 mm Speed 40 - 3600 rpm Speed setting rpm 4 automatic feeds 40-280 80-560 275-1800 550-3600 Spindle diameter 65 mm Drilling spindle stroke 120 mm Spindle holder: Aciera quick-change system Automatic thread cutting Drilling capacity in solid material 25mm Max drilling capacity up to 30mm Height adjustment via hand crank Motor: 1.1 KW Lamp Some quick-change shots Dimension WxDxH 90 x 130 x 185 cm Weight approx. 800 kg Technical information subject to reservation

recoem GDS-460 Challanger with air filter tower and turbo mill Year of construction : 2021 Condition : New Power : 22,5 kW motor Total power : approx. 48kW Throughput : 400kg/h Accessories : 2,3,4,5,6 hole sieve Dimensions : LxWxH 3000x1500x2200 mm Total weight : 3600 kg Rotor dimensions : L x diameter. 460x400 mm A compact recycling plant Model Challenger GDS 460. Single shaft cable breaker with 15 rotating 2 fixed knives. The design and precision of the cutting chamber can be reliable and versatile to achieve high standard performance with low consumption. Simple control panel with buttons. If you have any questions, simply contact us.

CNC - Sheet Metal Parts - Roll Straightening Machine for plane straightening and relaxing of thermally cut sheet metal parts, for stamped parts, for sheet metal parts that have been cut to size with the sheet shear. Our roller straightening machine is a purely electric machine, not hydraulics, the electronically controlled servo motors enable automatic CNC – controlled face straightening in the continuous process. CNC – controlled precision sheet metal parts roll straightening machine for sheets from 0.7 mm to a maximum of 14 mm sheet thickness at 500 mm sheet width Largest sheet width 1,500 mm Guideline power over the full width - - Steel sheet quality SR235 from 0.7 mm to 10 mm - Stainless steel sheet from 1 mm to 6 mm Planning by - 19 piece straightening rollers with Ø 50 mm 21 pieces of intermediate rollers with Ø 30 mm 13 pieces of support roller sets with ...

CNC - Sheet Metal Parts - Roll Straightening Machine for plane straightening and relaxing of thermally cut sheet metal parts, for stamped parts, for sheet metal parts that have been cut to size with the sheet shear. Our roller straightening machine is a purely electric machine, not hydraulics, the electronically controlled servo motors enable automatic CNC – controlled face straightening in the continuous process. CNC – controlled precision sheet metal parts roll straightening machine for sheets from 0.7 mm to a maximum of 14 mm sheet thickness at 500 mm sheet width Largest sheet width 1,500 mm Guideline power over the full width - - Steel sheet quality SR235 from 0.7 mm to 10 mm - Stainless steel sheet from 1 mm to 6 mm Planning by - 19 piece straightening rollers with Ø 50 mm 21 pieces of intermediate rollers with Ø 30 mm 13 pieces of support roller sets with ...

Agitator 0.12 KW with used gear motor Bauer 27 rpm and 2-wing Inclined blade stirrer 244 mm With traverse made of aluminum profiles 45 45 mm. Gear motor: Used gear motor Bauer, 3 x 230/400 volts, 0.12 kW, n1 = 1350 rpm, n2 = 27 rpm, M2 = 24.5 Nm, IP 54, weight approx. 8 kg. With motor protection plug. Shaft: precision stainless steel shaft D14, length 500 mm, diameter 14 mm, Material stainless steel 1.4301. With rigid coupling made of stainless steel 1.4571 Very slow-running, high-torque agitator for use in attachment tanks or cooking kettles.

Agitator 0.12 KW with gear motor SEVA 89 rpm and 2-wing Inclined blade stirrer 244 mm With traverse made of aluminum profiles 45 45 mm. Gear motor: worm gear motor SEVA, 3 x 230/400 Volt, 0.18 kW, n1 = 1340 rpm, n2 = 89 rpm (i = 15), IP 55, weight approx. 8 kg. With motor protection plug. Shaft: precision stainless steel shaft D20, length 1000 mm, diameter 20 mm, Material stainless steel 1.4571. With rigid coupling made of stainless steel 1.4571

Agitator 0.12 KW with gear motor Bauer and 2-wing Inclined blade stirrer 244 mm With traverse made of aluminum profiles 45 45 mm. Gear motor: Bauer worm gear motor, 3 x 230/400 volts, 0.12 kW, n1 = 2700 rpm, n2 = 180 rpm (i= 15), IP 55, weight approx. 8 kg. With motor protection plug. Shaft: precision stainless steel shaft D20, length 1000 mm, diameter 20 mm, Material stainless steel 1.4571. With rigid coupling made of stainless steel 1.4571 Very slow-running, high-torque agitator for use in attachment tanks or cooking kettles.

turning diameter: 120 mm turning length: 380 mm control: Fanuc 18 iTB max. swing diameter: 300 mm : : 8000 min/-1 : 7,5 kW : 26 Nm spindle nose: 100 mm spindle passage: 32 mm A-Axis: : 8000 min/-1 : 5,5 kW : 23 Nm spindle nose: 100 mm spindle passage: 32 mm : : 12 pos. tool taper: VDI 16 Sub Spindle: x-axis: 400 mm z-axis: 400 mm feeds:: rapid traverse: 12 m/min total power requirement: 20 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,8 x 2 x 1,7 m CNC - Ultra precision turning centre - CNC control Fanuc 18iTB - Main and counter spindle - Q-axis - SAUTER tool turret 16-fold (0.5.480.510) VDI 16 - Linear tool slide - automatic doors - Chip tray - Coolant system with fine filter (high Pressure Pump) - 3 jaw chucks - Various clamping devices/pressure collets - Various tool holders Control On: 24000h The data for this ad was created with ModulMWS - the software  ...

NEAGARI SHIBUYA Radial Forging Machine Model BF-350 New 2010 Specifications 1. Machine components (1) Bar-Forging Machine: 1 set (2) Manipulator: 2 set (3) Hydraulic System: 1 set (4) Electric Power & Control System: 1 set (5) Foundation: 1 set (6) Unloader: 1 set (7) Work Support: 6 set (8) Work Support (center): 2 set (9) Mandrel (IN): 1 set (10) Mandrel (OUT): 1 set (12) Die Changing Unit: 1 set 2. Work Piece 2-1. Material (1) Tool Steel (EX. DIN-X40CrMoV51AISI-H13JIS-SKD) (2) C-steel 2-2. Starting Dimension (1) Round: max. diameter 450mm (2) Square: max. flat to flat 240mm (3) Max. Length: 3500mm (4) Max. Weight: 3000kg 2-3).Forged Dimension (1) Min. Diameter: 80mm (2) Min. Square: 120mm (3) Max. Length: 8000mm (4) Max. Weight: 3000kg 3. Bar Forging Machine 3-1. Forging Ability (1) Number of rams: 4 (2) Force / ram: max. 7000kN (3) Hydrau ...

FEATURES: GIDDINGS & LEWIS 8000 CNC CONTROL, RETROFITTED 2000 55.12" DIAMETER FACE PLATE CHUCK WITH JAWS 16.92" DIAMETER BORING BAR BORING HEADS (2) W-AXIS POSITIONING X-AXIS TAPER FEED PRESSURE MEASURING DEVISE HARDENED & GROUND WAYS COOLANT SYSTEM WITH POLO PAPER FILTRATION PRAB CHIP CONVEYOR SYSTEM CAPACITY: MAXIMUM SWING OVER BEDWAYS 62.99" BORING DIAMETER SOLID BORING 12.4" TREPANNING 2" TO 25" COUNTER BORING WITH PILOT PRE-BORE + 25" MAXIMUM BORING DEPTH, Z-AXIS 396" LENGTH OF BED 1,176" WIDTH OF BED 39.37" MACHINE WEIGHT 180,000 LBS WORK HEADSTOCK: SPEEDS, INFINITELY VARIABLE 1.8-355 RPM SPEED RANGES 4 MAIN SPINDLE DIAMETER FRONT BEARING 11.81" MAIN SPINDLE BORE 6.4" MAXIMUM TORQUE, 31 RPM AT 180 HP 39,900 FT/LBS MAXIMUM WORKPIECE WEIGHT (1) REST 88,000 LBS MAXIMUM WORKPIECE WEIGHT (2) RESTS 110,000 LBS MAXIMUM WORKPIECE WEIGHT (3) RESTS  ...

BLM ADIGE LASERTUBE LT722D laser tube cutting machine manufactured in 2013, is designed for cutting tubes made of ordinary steel, stainless steel and aluminium. The machine processes metal workpieces with a maximum diameter of 152 mm, 100 kg weight and 6.5 m length. The process is carried out with a high-performance 2500 W CO2 laser, guaranteeing high quality, precision and speed of cutting. A SIEMENS CNC controller installed on the machine body is used to fully control the entire machining process, and Artube CAD/CAM software also allows the integration of the design phase with the production phase. The total weight of the laser is 9000 kg. Technical specifications of the BLM ADIGE LASERTUBE LT722D tube laser - CO2 laser power: 2.5 kW - source type: Rofin DC 025 COMPACT - CNC control: SIEMENS - CAD/CAM software: Artube - cutting head: 2D Tube Cutter BLM GROUP - processed mat ...

AGITATOR REITZ RW055142244: 0.55 KW / 142 rpm. and inclined blade stirrer With traverse made of aluminum profiles 45 45 mm. Worm gear motor: 3 x 230/400 volts, 0.55 kW, IP55, n²=142 rpm, weight approx. 20 kg. With motor protection plug. Shaft: Precision stainless steel shaft D20, length 1000 mm, diameter 20 mm, material stainless steel 1.4571 Coupling: Rigid coupling, blank, material stainless steel 1.4571 Agitator: Two-bladed inclined blade stirrer, diameter 244mm, material stainless steel 1.4571, screwed version, blade adjustable in angle.

Main data Direct main drive -maximum diameter to be processed mm. 2630 -plate diameter mm. 2500 -plat speed rpm. 0.1-60 -vertical stroke of the left HEAD Z1 mm 1,100 -vertical stroke of the right HEAD turret Z2 mm 570 -working speed X1-sled left mm./min. 1-6000 - working feed rate X2-right sledge mm./min. 1-6000 - working feedrate Z1 - left slide mm./min. 1-6000 - working feed speed Z2-right slide mm./min. 1-6000 - fast forward speed - X1, X2, Z1 and Z2 mm./min. 8,000 - traverse travel speed mm / min 400 -main drive motor - turning Fanuc 100 kW power Nominal speed rpm 4000 - axle drive motors -Fanuc: Nominal torque Nm 22 Nominal speed rpm. 4000 Bil0rcq8 CNC FANUC 18 itB 4.PRECISION The positioning accuracy is: Positioning accuracy -axis X1,2 and Z1,2 mm 0,040 / 1000 Positioning repeatability -axis X1.2 and Z1.2 mm 0.025

Small precision 2-head series drilling machine WMW Fritz Heckert type BT 6Machine -No: 6304/77 + 890577 built in 1977Technical specifications:Drilling capacity: 6.0 mmNumber of spindle speeds: 6Spindle speeds: 400/630/1080/1760/2790 /: 4700 rpm.Projection: 125 mmColumn diameter: 60 mmTable size: 450 x 170 mmQuill stroke: 60 mmPower connection: 380 V / 50 HzWith- height adjustable head- Drill chucklittle used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

MACHINERY CO2 1610 WiFi 160 W laser was built by the Polish company Technologie CNC in 2019. The machine is designed for engraving materials made of glass, ceramics and marble, as well as cutting such materials as acrylic and plywood. The machining process is performed on a large work table with a length of 1600 mm and a width of 1000 mm, using a powerful CO2 laser, guaranteeing high cutting speeds as well as the highest precision and quality of machining. The laser engraving machine supports the most important graphic formats such as DST, PLT, BMP, DXF, AI and the most popular graphic programmes such as CorelDraw, AutoCAD or Photoshop. The installed WiFi module allows for wireless communication with the machine. Along with the MACHINERY CO2 1610 WIFI laser engraving machine, equipment is offered consisting of an unused knife table and rotary axis, a CW 5200 liquid cooler and a dust e ...

Electric chain hoist make ABUS type GM 3 500.6-111Fabr.-No: D665223/074 year of manufacture 1990Technical specifications:Load capacity: 500 kgLifting Height: 3.0mLifting speed: 6.0 m/min.Precision stroke: 1.5 m/min.Motor power: 0.11 / 0.5 kWused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

RUIAN KODA MACHINERY ENG-500 film glove production line, built in China in 2020, is designed to produce high-quality double-layer film gloves that are used in e.g. grocery shops or in production. The high-quality steel construction of the automatic glove making machine ensures high stability even at maximum production speeds of up to 500 gloves per minute. The film glove production line uses moulds to produce disposable film gloves with a maximum length of 400 mm and a width of 300 mm, providing effective protection against viruses and bacteria. The 2.2 kW YASKAWA servo drive, which controls the entire process, ensures high precision in feeding the material to the sealing position and the sorting point of the final product. The ENG-500 film glove making machine also allows the production of other film products, such as breakfast pouches, after changing the heat sealing dies. The au ...

RUIAN KODA MACHINERY ENG-500 foil gloves making machine, manufactured in China in 2020 is dedicated to the production of foil products i.e. breakfast bags or disposable gloves, using interchangeable sealing moulds. The robust steel body of the film glove production line ensures high operating stability, even at maximum production speed. The copper dies included with the machine allow for the production of high-quality disposable gloves with a maximum length of 400 mm and a width of 300 mm. The ENG-500 automatic film glove production line produces up to 500 pieces of this type of item in one minute. The produced gloves are characterised by two thick layers, effectively protecting the hands from viruses and bacteria. The automatic film glove production line is equipped with, among others, an AISET temperature controller, a PLC controller and a 2.2 kW YASKAWA servo drive, which ensure ...

Precision cylindrical grinding machine make STUDER type S 40/3Machine -No: 6048-7 built in 1989set up for 45 ° plunge-cut grinding, 30 ° for valve partsincluding automatic feed and discharge with separatorwith measuring control Novomaticused, in mint conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Watson-Marlow Bredel SPX25 Hose Pump Condition: Unused Shipping weight: 120 kg Dimensions: 100x75x65cm WxLxH Bredel high-performance hose pumps handle abrasive sludge, paste-like materials and slurry with 100% volumetric accuracy. Unlike diaphragm, lobe, and progressive cavity pumps, moving parts do not come into contact with the product and there are no mechanical seals in the pumps. The pumped liquid is entirely contained within a long-lasting hose, preventing the user from coming into contact with chemicals, sludges, and slurries. Each Bredel hose is precision machined to ensure flow stability and pump performance in demanding fluid handling applications.

Precision universal cylindrical grinding machine make ZIERSCH & BALTRUSCHType URS 751Serial -No: 84119, year of construction 1984Technical specifications:Center height: 130 mmDistance between centers: 750 mmmax. workpiece diameter with new disc: 245 mmPermissible workpiece weight between the tips/in the chuck: 120/60 kgLONGITUDINAL SLIDEmax travel:900mmspeed hydr. infinitely variable: 0.05 - 5 m/minTravel per handwheel rotation Position 1/ 25.5 mm/ 10 mmGraduation mark of the handwheel position 0.1 mmReading Accuracy:0.01mmCROSS SLIDERapid feed and return: 40 mmManual adjustment: 54 mmTravel of one hand wheel turn: 1 mmgr. Insertion depth: 1.4 mm/Drm.Plunge feed: 0.05 - 10 mm/minGRINDING HEADSTOCK3 grinding spindle speeds: 1580, 1750, 1970 rpm.Coarse adjustment: 155 mmSwiveling of the grinding headstock:+ - 30°Drive power of the grinding headstock: 4 kWWORKHEADInfinitely variable speed: ...

Precision universal cylindrical grinding machine make ZIERSCH & BALTRUSCH type URS 750with internal grinding deviceMake -No: 220 built in 1976Technical specifications:Center height: 130 mmDistance between centers: 750 mmmax. workpiece diameter with new disc: 250 mmPermissible workpiece weight between the tips/in the chuck: 120/60 kgLONGITUDINAL SLIDEmax travel:900mmspeed hydr. infinitely variable: 0.05 - 6 m/minTravel per handwheel rotation position 1/ 25 mm/ 10 mmGraduation mark of the handwheel position 0.1 mmReading Accuracy:0.01mmCROSS SLIDERapid feed and return: 40 mmManual adjustment: 54 mmTravel of one hand wheel turn: 1 mmgr. Insertion depth: 1.4 mm/Drm.Plunge feed: 0.05 - 10 mm/minGRINDING HEADSTOCK3 grinding spindle speeds: 1580, 1750, 1970 rpm.Coarse adjustment: 155 mmSwiveling of the grinding headstock:+ - 30°Drive power of the grinding headstock: 4 kWWORKHEADInfinitely vari ...

Plasma cutting system make SPIROYear of manufacture 2002Technical specifications:Plasma extraction table: 6000 x 1500 mmPlasma source: Hypertherm 1000Feeding and straightening machine: 1500 mmMotorized decoiling system for: 3 coilsCoil weight: 1.25 twith- Hypertherm 63 series- Control Burny 2.8 plus CMW- IOWA precision PCF6016- Spare parts packageusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Precision Circular Saw Fabr. ULMIA Type 1710Machine -No: 580 built in 1977Table size: 630 x 500 mmHeight adjustment of the saw shaft: 60 mmMax. Saw blade diameter: 250 mmMax. Cutting height: 77 mmSaw blade hole: 20 mmSpeed: 4500 rpm.Table height: 820 mmOutside dimensions approx: 900 x 1200 x 900 mmWeight approx: 88 kgWith- tiltable saw blade- height adjustable saw bladeused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools