pre heater used for sale

Erika Record Automatic 3-30 Roll Press Dough Dividing and Casting Machine - Manufacturer: Karl Schmidt GmbH - Model: Erika Record Automat - Type: 3-30 - 30 pieces - Incl. 3 plastic knitting plates - Machine is mobile on castors - Machine is technically and optically in very good condition Technical data: - Weight range : 30gram to 100gram -Dough insert: 900 grams to 3000 grams - Year of manufacture: refurbished 2016 - 400 volts

hydraulic press with hot platens by with thermal oil model COLOMBO REMO second hand machine for wood, veneer, composite materials, furniture, panels etc platen useful size mm.3000 x 1300 n.06 cylinders diam.mm. 80 max. thrust Ton. 120 intermediate worktop ( 3 worktops , 2 work compartments ) hydraulic pump motor power Hp 3 heating by with thermal oil weight kgs. 5500 volt. 380/50

Verstelbare buigmatrijs voor hoogwaardig staal Beschikbare maten: - V65 gt; V185 mm - V40 gt; V280 mm - V120 gt; V300 mm - V150 gt; V400 mm Aanpassing om de 10 mm De afstelling kan handmatig of halfautomatisch gebeuren. Neem contact met ons op voor meer informatie.

hydraulic PRESS with hot platens by with thermal oil model COLOMBO REMO second hand machine DRILLED SOLID STEEL PLATEN for wood, veneer, composite materials, furniture, panels etc platen useful size mm.3450 x 1400 n.08 cylinders diam.mm. 80 max. thrust Ton. 150 intermediate worktop ( 3 worktops , 2 work compartments ) hydraulic pump motor power Hp 4 heating by with thermal oil weight kgs. 9.500 volt. 380/50

turning diameter over bed: - mm turning diameter over slide rest: - mm turning length: - mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

PRESS DESIGN   drive system: eccentric / crank PRESS FORCES   total force (nominal): 40 to PRESS TABLE   table surface (left-right): 650 mm   table surface (front-back): 380 mm   thickness of bolster plate: 60 mm   opening in bed (diameter): 120 mm SLIDE   table surface (left-right): 350 mm   table surface (front-back): 250 mm   spigot hole diameter: 40 mm   stroke: 78 mm   stroke rate (max.): 145 /min SLIDE (MECHAN. PRESS)   slide adjustment: 60 mm   stroke min.: 8 mm   stroke max.: 78 mm   main drive power: 3 kW TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 297 mm ELECTRICAL SPECIFICATIONS   total power consumption: 3.05 kW   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 1300 mm   space requirements -front/back-: 1100 mm   total height: 2150 mm   total weig ...

The Dorst TPA 70 is a used powder compaction press, known for its precise and reliable performance. It delivers a maximum pressing force of 700 kN with a withdrawal force of 400 kN, making it suitable for diverse compaction needs. The machine features a pressing travel of up to 30 mm, with a maximum filling height of 70 mm and operates at speeds between 14 to 40 strokes per minute. This ensures efficient throughput, ideal for high-demand production environments. With an upper punch stroke of 120 mm and adjustable travel of 200 mm, the Dorst TPA 70S offers flexibility in application. It requires a compressed air supply with an intake of approximately 200 liters per minute, and operates on a total connected load of about 20 kW. To enhance functionality, the machine is constructed robustly, maintaining a workplace-related sound level of 78 dB(A), and features a press housing capacity of 190 ...

DHS-200 – 200 T Hydraulic Heating Press – Sliding Table – Heating Plates 800 × 800 mm For sale is a hydraulic heating press DHS-200 with a pressing force of 200 T and an extendable sliding table system. The machine has heating plates ranging in size from 800 × 800 mm, an open height of 800 mm and a hydraulic stroke of 600 mm, and is particularly suitable for laminating, forming and thermal pressing processes with temperature-controlled tools. Technical data + information: Hydraulic Heating Press DHS-200 – 200 T General information - Type: Hydraulic heating press with sliding table - Pressing force: 200 t - Usable area table: 800 × 800 mm - Heating plates: 800 × 800 × 95 mm - Open width: 900 mm - Open height: 800 mm - Extendable table: 800 mm - Table height: 900 mm - Overall dimensions (WxDxH): 2,150 × 2,050 × 2,850 mm - Total weight: approx. 9,800 kg ...

Agfa Elantrix ST 125 SX Pressure Plate Stacker; cleaned and tested; Panel width 300-1250mm; Panel length 275-1470mm; Panel speed 400-2500mm/min.; Printing plate trolley. Plate stacker Agfa Elantrix ST 125 SX; cleaned and checked; plate width 300-1250mm; plate lenght 275-1470mm; plate speed 400-2500mm/min.; plate trolley.

Pressing force: 63t, working dimensions X/Y: 620mm/500mm, motor power: 22kW. An on-site inspection is possible.

CNC Press Brake Manufacturer: Blemas Type: 100-33 Year of Make: 1994 CNC control: Cybelec DNC 74 PSG Pressing force: 100 tons Working width: 3 m Weight approx. : 8 to. Approx. dimensions: 3,600 x 1,600 x 2,600 mm

3 assen: Y1 / Y2 / X Handmatige bombeertafel De achterkant van de machine is gesloten. Capacity: 175 ton x 3600 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 3150 mm Max stroke: 200 mm Max distance between table -- ram: 450 mm Depth of throat: 300 mm Locking speed: 80 mm/sec Working speed: 9 mm/sec Returning speed: 95 mm/sec Electric motor (power): 15 kW Length: 3880 mm Depth: 1750 mm Height: 2750 mm Weight: 13,4 ton

Qty. 1 Second hand aluminium extrusion press line Mfc.: Taiyuan Force: 5000 MT Type: Front loading – single action Built: 2007 Stopped in 2016 Product weight: max. 55 kg/m Billet dia.: 279 & 406 mm (11” & 16”) Length: 600 - 1200 mm Consist of: Cold billet saw Gas heated billet furnace Extrusion press Run-out table Platen saw Quenching device Single puller Stretcher Finishing saw Dies heater

LASCO FP 222 S hydraulic press was built in Germany by Lasco Umformtechnik GmbH. The machine has been continuously maintained and upgraded throughout its service life. In 2022, a major upgrade was carried out, which included replacing the electrical cabinet, installing light curtains and adding a SIEMENS SIMATIC HMI TOUCH touchscreen operator panel. The LASCO FP 222 S is an extremely versatile hydraulic press designed for the production of extremely precise, repeatable and yet complex components used in the broadly defined automotive or machinery industry. Its main application is hot and cold forging. The use of a die cushio in the lower work table and the large slider stroke means that the machine can also be used as a deep drawing press. All machining processes are performed with a high press force of up to 200 tonnes, which, combined with the highly dynamic slider, guarantees the b ...

Manufacturer: Huber Model: Strainpress SP 290 Type of Machine : Screw press separator Condition: Used, fully functional Included Spare Parts and Accessories - Control cabinet (included) - Digital documentation (included) - Used screw shaft screening zone, conical 288/204 SW1735, including sleeve - New screw shaft press zone 198 SW1678 - New screen basket Strainpress 290 200/2 L810 RV 2-3.42 press zone - 4 x new spherical roller bearings 22313EAE4 (d65 D140 W48) - 2 x new piston rings 100/120x12 - Small parts kit: shaft seals, spacer rings, grease cartridges, shaft keyways, bolts, brass nuts, bearing puller tool Find more here - .ucymachines/ Contact us at - sales@ucymachines

4 ROLL HYDRAULIC DUAL PRE-PINCH 3000x15 MM PLATE BENDING MACHINE NEW Brand MG model M3015 -Width of plate 3000 mm -Thickness of plate rolling 15 mm -Thickness of plate pre-bend 12 mm minimum bending diameter ID 350 mm Rolls dimensions: -Surface length mm. 3100 -Top roll mm. 290 -pinch roll mm. 270 -Power electric 10 Hp Technical data: -rolls hardened surface high resistance -variable rolling speed -Powered driven hydraulic rolls rotation -conical bending attachment roller type -calibration system re-rolling welded shells -deflection pinch pressure adjustable upon the thickness -overload protect complete safe operation of the machine. -control console on wheels with electric joysticks commands -position readout digital display for rolling memorize and repeat -safety and emergency systems installed -manuals and schematics along with the machine

Key data: 5 t, 350 mm, 310 mm

Small Electric Table Press Brake with Spindle Drive TableOne 5 - CoastOne Made in Finland Press force: 5T Bending Length: 350mm Spindles: 1x5T Control: TC15-2D Graphics Back gauge: 1 axis controlled X axis - R axis manual Bending tool holder: Type A / R1 / ES Style / AMADA Promecam 1x set of bending tools incl. 36 months warranty after installation Delivery excl.; Available now! Viewing under power possible at any time by appointment!

Heating Elements / Heating Elements for Jufeba Pretzel Baking Machine LN-2Above price for 6 pieces Tubular Radiator with Stainless Steel JacketPower: 1200WSvoltage: 230Vgestr. Length: 1410mm (±2%)of which unheated: 2 x 30mmTube diameter: 8.5mmSurface loading: approx. 3.4W/cm²Tube jacket material: 1.4828 / AISI 309Connection: Thread M4Closure: Silicone curved: U-shapewith connection plate 50x20mmDetails see pictures.Payment: Bank transfer or cashOur opening hours: only by appointmentThe telephone Availability is only possible Monday to Friday from 08:00 to 17:00. Shipping and

Heating Elements / Heating Elements for Jufeba Pretzel Baking Machine LN-2Above price for 2 pieces Tube Heater with Stainless Steel JacketPower: 1200WSpan: 230Vgestr. Length: 1410mm (±2%)of which unheated: 2 x 30mmTube diameter: 8.5mmSurface loading: approx. 3.4W/cm²Tube shell material: 1.4828 / AISI 309Connection: Thread M4Closure: Silicone bent: U-shapewith connection plate 50x20mmDetails see pictures.Payment: Bank transfer or cashOur opening hours: only by appointmentThe telephone Availability is only possible Monday to Friday from 08:00 to 17:00. Shipping and

Fortuna Automat A3 Dough Dividing and Forming MachineProduct descriptionManufacturer: Edmund SchröderType: Fortuna Automat A3Condition: used, functional, bakery condition30 divisionDough dividing and knitting machineOuter dimensions: W.: 65 cm, D.: approx. 74 cm, H.: 145 cmDetails see pictures

Heating Elements / Heating Elements for Jufeba Pretzel Baking Machine LN-2Above price for 4 pieces Shipping only 4 piecesTubular heater with stainless steel jacketPower: 1200WSpanning: 230Vgestr. Length: 1410mm (±2%)of which unheated: 2 x 30mmTube diameter: 8.5mmSurface load: approx. 3.4W/cm²Tube jacket material: 1.4828 / AISI 309Connection: Thread M4Closure: Silicone bent: U-shape with connection plate 50x20mmDetails see pictures.Payment: Bank transfer or cashOur opening hours: only by appointmentThe telephone availability is only Monday to Friday from 08:00 to 17:00

Heating elements / heating rods for Jufeba pretzel baking machine LN-1Above mentioned price for 4 pieces Shipping only 4 piecesTubular heater with stainless steel jacketPower: 900WSpan: 230Vgestr. Length: 860mm (±2%)of which unheated: 2 x 30mmTube diameter: 8.5mmSurface load: approx. 4.3W/cm²Tube shell material: 1.4828 / AISI 309Connection: thread M4Closure: Silicone curved: U-shape with connection plate 50x20mmDetails see pictures.Payment: Bank transfer or cashOur opening hours: only by appointmentThe telephone availability is only Monday to Friday from 08:00 to 17:00

Bread press Werner&, Pfleiderer Rotamat E + 3 WirktellerProduct descriptionManufacturer: Werner&, PfleidererType: Rotamat 3Current type: 3 / N - 50 HzNominal voltage: 380 VNenn operating current: 2.5 AMax. Pre-fuse: 16 ACondition: used, in working order, bakery condition - please clean thoroughly before useWith three red plastic knitted platesThe working room height is adjustableFunctions: For cutting or actingDetails see pictures.

Used PRETZEL BAKING MACHINE Jufeba LN 2Manufacturer: JufebaType: LN 2Power up to max.200 pieces/hourStainless steel versionDimensions: 820 x 870 x 800 mm, WxDxHAnschluss 400V, 7.3, kW, 16A-CEE plugThe Jufeba LN 2 enables the forming, baking and dispensing of pretzels in a continuous automated process. The machine is user-friendly and has various settings to produce different types and sizes of pretzels. By using high-quality materials and precise technology, the Jufeba LN 2 guarantees consistently high quality

used bread press RotamatManufacturer : WPTyp : Rotamat GS380 Volt, weight range from 30 - to 80 grams30 graduation including 1 knitting plateThe Rotamat GS roll press from the manufacturer WP is a professional machine used in bakeries and other bakeries to form rolls and other pasta. The Rotamat GS enables precise and efficient shaping of the dough to produce uniform and attractive rolls. With this machine, bakeries can optimize production processes and ensure the consistency of their baked goods. The

Fortuna Roll Press Automatic A3 Dough Dividing Machine Product Description Manufacturer: Fortuna Machine Type: Automatic Machine A3 / Size 3 With two red plastic knitting plates The working chamber height is adjustable Functions: Only cut or cut as well as act Details see pictures.

Roll Press Erika Record Semi-Automatic Product Description Manufacturer: Erika Record Type: Semi-Automatic Condition: used, functional, baker's condition Roll press for all doughs for dividing dough and rounding 30-piece Details see pictures.

Used Fortuna Roll Press Automatic A3 Dough Divider Product Description Manufacturer: Fortuna Machine Type: Automatic Machine A3 / Size 3 With two red plastic warp knitting plates The working room height is adjustable Functions: Only cut or cut as well as act Details see pictures.

Roll press Record â Product description âœ" Manufacturer: Record âœ" Condition: used, bakery condition Details see pictures

Roll press Fortuna-Schröder semi-automatic machine size 3â Product descriptionâœ" Manufacturer: Edmund Schröderâœ" Type: Fortuna Semi-automatic machine size 3âœ" 30 divisionâœ" Dough part and knitting machineâœ" Power supply: 400 V, 50 Hz, 1.1 kW For details see pictures.

Bread press VEB Habämfa â Product description âœ" Manufacturer: VEB “Habämfa âœ" Condition: used, bakery condition, not checked For details see pictures.  

Bread press Werner&, Pfleiderer Rotamat E Bread press Werner&, Pfleiderer Rotamat E + 3 knitting plates â Product description âœ" Manufacturer: Werner&, Pfleiderer âœ" Type: Rotamat 3 âœ" Year of construction: 1991 âœ" Current type: 3 / N - 50 Hz âœ" Nominal voltage: 380 V âœ" Nominal operating current: 2.5 A âœ" Max. pre-fuse: 16 A âœ" Condition: used, functional, baker's condition - please clean thoroughly before use âœ" With three red plastic knitting plates âœ" The working room height is adjustable âœ" Functions: For cut or act details see pictures

Bread Press Lippelt Rotamat Manufacturer : Lippelt Type : Rotamat GS/M30 380 Volt, Weight Range from 30 - to 80 Grams 30 Graduation including 3 Knitted Plates Details see picture

 Bread press WP Rotamat CN Manufacturer : W&, P Type : Rotamat CN 380 Volt, weight range from 30 - to 80 grams 30 graduation including 3 knitting plates

Key data: 100 t

Durendus DCD-100 – Hydraulic single-column press 10–100 t – 800 × 600 mm For sale is a hydraulic single-column press (C-frame) from the manufacturer Durendus with an adjustable press force from 10 to 100 t. The machine is designed for demanding forming, deep-drawing and assembly processes and has an integrated thermoforming pad and a modern Siemens control system. Thanks to high travel speeds and precise control, it is suitable for both series production and flexible individual applications. Technical data + information: Hydraulic Single Column Press – DCD-100 General information - Manufacturer: Durendus - Model: DCD-100 - Type: C-frame / single-column press - Press force: 10–100 t (adjustable) - Total weight: approx. 6,500 kg - Overall dimensions: approx. 1,850 × 1,845 × 3,520 mm - Table height above floor: 1,000 mm Workspace - Max. distance table ...

Type of press: 2-cylinder synchronized press, pressing force: 125t, rated pressing force: 110t, bending length: 3000mm, ram stroke: 360mm, installation height: 540mm, distance between frames: 2550mm, hydraulic pressure: 256bar, weight: approx. 12000kg, control system: Cybelec DNC 7000 Graphic. Including various tools. The control system and the screen were renewed in mid/late 2025. An on-site inspection is possible.

ID3749 Doppstadt Inventhor 9 year/Baujahr 2019 approx. 4.180 hours/hours 32 t Pre-shredder, roller length 3,000 mm Pre-shredder, roller length 3,000 mm

Pressure total: 1000 ton Stroke: 170 mm Shut height (stroke down, adjustment up): 490 mm Slide adjustment: 16 mm Max. stroke rate: 32 s.p.m. Table surface area : 800x800 mm Ram surface: 825x860 mm Free frontal opening L-R: 900 mm Upper ejector stroke: 16 mm Upper ejector capacity: 10 ton Lower ejector stroke: 80 mm Lower ejector capacity: 32 ton Dimensions L x W x H: 2950x1950x4090 mm Machine weight: 26 kg Main drive: 33,5 kW

Pressure total: 1000 ton Stroke: 170 mm Shut height (stroke down, adjustment up): 490 mm Slide adjustment: 16 mm Max. stroke rate: 32 s.p.m. Table surface area : 800x800 mm Ram surface: 825x860 mm Free frontal opening L-R: 900 mm Upper ejector stroke: 16 mm Upper ejector capacity: 10 ton Lower ejector stroke: 80 mm Lower ejector capacity: 32 ton Dimensions L x W x H: 2950x1950x4090 mm Machine weight: 26 kg Main drive: 33,5 kW

pressure: 200 t nominal power: 2000 kN stroke length max.: 1700 mm working feed: 50 mm/sec weight of tools max.: 50000 kg voltage: 400 V table-size: 4.800 x 2.400 mm total power requirement: 99 kW weight of the machine ca.: 113 t dimensions of the machine ca.: m passage width: mm stroke: mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine Group: Single Column Eccentric Press 25 to Make: Colombo Agostino Type CA.25.V Year of Make: 1988 Control: conventional

A completely renewed and overhauled Oevermann press is available. Press force: 150t, reach: 400mm, stroke: 400mm, installation height: 600mm, table dimensions X/Y: 1200mm/710mm, drive power: 37kW, weight: approx. 9500kg. The following areas have been renewed and overhauled: hydraulics, components, tank, lines and safety devices. The control system has been completely newly installed. Documentation available. An on-site inspection is possible.