136,449 used machines on RESALE, but how to find them? Machine Search
HOT PRESS MODEL PL 90s 3000x1300 mm PS VBO TECHNICAL CHARACTERISTICS Platens dimensions 3000x1300 mm Stroke 400 mm Type of stroke Upstroke design (from bottom to top) Type of platen Assembled platens with coil and aluminum covering Total thrust 90 ton on 80% of the surface Pressing Cylinders N° 6 cylinders ø70 mm Specific Pressure 2.05 kg/cm2 on 100% of the surface 2.56 kg/cm2 on 80% of the surface Loading and Unloading Side3000 mm side Type of Heating system Oil boiler ? maximum temperature = 120°C Heating system specificationsElectric boiler 18 kW Opening Automatic by timer Control Board Standard Power supply 400V, 50Hz, 3ph Security device Safety rope around the press Red emergency Button Two Hand control Norma ...
Working height 900mm Nominal width 1300mm Effective working width 1270mm Rolling pressure force max 40kN Passage height max 120mm Feed transport 6-50 m/min stepless/frequency controlled Plate width min 200mm Plate length min 1000mm Plate thickness min 3mm Power supply 2,2kW Drive power height adjustment 0,55 kW With single tempering device STW 180/1-18-30-N1.1
pressure: ca.10 t throat: anpassbar mm stroke: 250 mm table surface area: 220 x 220 mm mm material diameter max.: ca. Ø 267 mm total power requirement: 1,5 kW weight of the machine ca.: 430 kg dimensions of the machine ca.: 899 x 772 x 1520 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Used High Quality Bystronic pressbrake 6-axis for a sale.
Capacity: 1.100 Ltr. Operating pressure: 5.0 bar, with technical documentation Year of Make: 1987 Manuf.: Binder, Crailsheim Material: stainless steel, 1.4301 Design: Cylindrical sthd, on 3 feet, outlet with disc valve DN 32, pulled down cleaning line with spray head and pressure fitting, sample tap, disc valves DN 32, manhole cover last use: beer Height approx. 2,280 mm (with cleaning line) Diameter: approx. 900 mm Prices plus VAT. VAT, from our warehouse, free truck loading!
Inv. Num. : 7796 Type: HSA 200 T Producer: Hidroliksan Created: 2022 Parameters: Operating hours: 1600 h Compressive force: 200 t Maximum stroke: 450 mm Top table length: 1600 mm Top table width: 1400 mm Speed (high): 250 mm/s Speed (down): 160 mm/s Working speed: 5-18 mm/s Machine height: 5000 mm Machine length: 3650 mm Machine width: 3400 mm Machine weight: 18,000 kg
This 3-axis Durma AD-S 40220 press brake was manufactured in 2023. It features a pressing force of 220 metric tons and a bending length of 4050 mm. The machine is equipped with a servo-motor-driven backgauge system and a CNC control unit with a 15 touchscreen. If you are looking to get high-quality bending capabilities, consider the Durma AD-S 40220 press brake we have for sale. Contact us for further details.
Press brake manufactured in 2004. This Salvagnini Performer / P2 features a tool set in good condition considering its age, with one defective threading segment that does not impede production. The upper edge cutter has been replaced. If you are looking to get high-quality bending capabilities, consider the Salvagnini Performer / P2 machine we have for sale. Contact us for further details.
Display: microset DPS, an on-site inspection is possible, without power.
26 Mint Unused Hydraulic Cylinder Single Wheel with Tension Spring Manufacturer: Matra Frankfurt Article number 4641.00000.5700166Z Overall length retracted 345 mm Overall length extended 470 mm Stroke 150 mm Piston rod 63 mm Piston 80 mm Drauck 350 bar Input errors, errors and prior sale reserved.
BRUDERER BSTA 25 Precision high speed punching press. Nominal capacity: 250 kN; 25 tons. Min./Max. number of strokes: 100/1500. Max width of strip: 200 mm. Adjustable stroke: 13, 16, 19, 25, 32, 38 mm. Fitted with roll feeder BBV 202/120 on left hand side. Feed length variable up to 120 [mm] max. Optional: Sound insulating cabin. Condition: good working and visual order. Oil pump. Oil cooler. Execution: 4 supports. Front and rear safety guards. Fitted on rubber feet. Table dimensions: 530 x 530 mm. Passage between the supports: Longitudinal 540 mm; Lateral 200 mm. Slide/Ram adjustment 51 mm. Documentation in German or English language included. Press weight cca. 4800 kg. Press dimensions: 2055 x 1355 x H26200 mm. More machines from brands Bruderer, Bihler, Soprem, Noxon, Huras, Schaal and Mabu on stock available on request
Technical data: Capacity, ton 1000 Ram stroke, mm 400 Max. ram strokes per min. 20 Shut height,mm 1000 Ram adjustment, mm 320 Table size, mm 3150 x 1800 Ram size (front-to-back), mm 1700 Column gap size, mm 1500 x 1900 Bolster plate thickness, mm 250 Ram travel to its extreme position where it develops nominal capacity, mm 12 Pneumatic cushion capacity, ton 200 Pneumatic cushion stroke, mm 200 Upper knock-out capacity, ton 50 Main motor power, kW 132 Press dimensions, mm 5150 x 4700 x 7830 Press weight, kg 200000
Capacity: 3.100 Ltr. Operating pressure: 4.5 bar, with test book Year of Make: 1976 Manuf.: Wabag Material: Stainless Steel, 1.4571, V4A Design: Cylindrical sthd, on 3 feet, spout with ball valve DN 25, lateral weld-on nozzle DN 65, various connections inch threads, manhole cover, slight adhesions inside and outside last use: water Height approx. 3,300 mm (with cleaning line) Diameter: approx. 1,150 mm
Nominal force: 500 ton Slide stroke: 250 mm Slide strokes per minute: 25 Table dimensions: 1400 x 2500 mm Max distance between table and slide in its lower position at the upper position of adjustment: 750 mm Size of distance adjustment between table and slide: 250 mm Press dimensions (Length x Width x Height): 4130 x 2945 x 7200 mm Press weight: 69000 kg
REP Press Model V58Y10W Injection volume 1000ccm Platen size: 500 x 630 mm Year 2006 Power: 2550 kN Operating hours: 14570 Moveable traverse Fix traverse Sliding Table
Maximum force of slide: T 250 Stroke of slide: mm 400 Stroke rate per min 12 Adjustability of slide: mm 120 Bed area (W x D): mm 2500x1400 Main motor power: kW 32 Max depth of extraction 100mm pressing force during the maximum depth of extraction T 100 Force holding extract unit: T 50 Height above ground: mm 5000 Weight: 66 ton
clamping force: 400 kN injection volume: 125 cm³ screw diameter: -- mm platen size: 600 x 400 mm Condition: used, Specification: C-frame injection moulding machine for TPV - second-hand clamping unit: - Clamping unit: vertical - Tonnage: 40 t - clamping force: 400 kN - Heating platen size: 600 x 400 mm Injection unit: - Injection volume max.: 125 cm³ - Connected load: 3x 400 V, 50 Hz 90A fuse protection Approx. dimensions: 1,550 x 1,050 x 3,120 mm Weight approx.: 2,250 kg Two identical systems are available. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Nominal force, kN 2500 Slider stroke, mm 400 Number stroke per minute 25 adjustment mm 260 Distance between table and slider, mm 750 Main motor power kW 47 Table size width / length mm 1250/2500 Dimensions of the machine Length Width Height (mm) 4555_2900_5855 Weight kg 50100
clamping force: 400 kN injection volume: 125 cm³ screw diameter: -- mm platen size: 550 x 400 mm Condition: used, Specification: C-frame injection moulding machine for TPV - second-hand, Modell TTV-C40-125 C40P01B clamping unit: - Clamping unit: vertical - Tonnage: 40 t - clamping force: 400 kN - Heating platen size: 550 x 400 mm Injection unit: - Injection volume max.: 125 cm³ - Connected load: 3x 400 V, 50 Hz 90A fuse protection Approx. dimensions: 1,550 x 1,050 x 3,120 mm Weight approx.: 3,200 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Designed to ISO2858 the ECC (close coupled) Plastic Mechanical Seal Pumps are heavy duty pumps.
Presses Manufactured by JR Dare Model PR100X2 Tonnage can be set between 20 and 100ton Platen size 16” (400mm) x 16” (400mm) Daylight 400mm. Pressure can be changed Bumps cycles platen temperature all programmable Mitsubishi controls 1x pump unit per pair of Presses Dims: 2.4m long x 1m deep x 2m high
Workpiece length 2200 mm Workpiece height 1400 mm Vertical pistons Ø70mm Motor power 1.5 kW Made in Denmark Transport dimensions 2900x2500x900 mm Weight 500 kg Price 1250 Eur (EXW Jonava, Lithuania)
Designed to ISO2858 the ECC (close coupled) Plastic Mechanical Seal Pumps are heavy duty pumps.
Capacity: 3.404 Ltr. Operating pressure: 2.0 bar, with test book Year of Make: 1986 Manuf.: Gresser Material: stainless steel, 1.4301 Type: Cylindrical sthd, on 4 feet, outlet with disc valve DN 40, pulled down cleaning line with fitting, pedestal hose, manhole cover last use: beer Height approx. 2,500 mm (with cleaning line) Diameter: approx. 1,505 mm Please send inquiries to: infohochholzer
Functional, used chamber filter press with motorized hydraulics and closed filtrate outlet.
Key data: 22 mm, 900 , 850
Electric Press Brake C9s CoastOne - Made in Finland Pressing force: 22T Bending length: 900mm Spindles: 1x22T Control: TC15-2D Graphics Back gauge: 2 axis controlled X-R axes Bending tool holder: Type A / R1 / ES Style / AMADA Promecam 1x set of bending tools incl. 36 months warranty after installation Delivery excl.; at call Viewing under power possible at any time by appointment!
800-chamber filter press with motor hydraulics, closed filtrate drain and automatic plate displacement. When the filtrate drain is closed, the filtrate runs through channels within the plate pack to the connections on the fixed stand.
Key data: 80 , 1050 , 450
MODEL ST-80 Power t 80 Motor power kw 3 Working speed mm/s 3.8 Approach speed mm/s -- Return speed mm/s 4.7 Maximum pressure bar 315 Piston stroke – J mm 450 Lower table mm 1,000 x 1,750 Head Displacement – C mm 730 Bridge Displacement – D mm 1,100 Front light – A mm 1.050 Vertical light – B mm 500 Working height – E mm 800 Total front – G mm 2,000 Total side – H mm 1,750 Overall height – I mm 2,250 Weight kg 1,700 STANDARD DESCRIPTION: We have designed ST series motorized hydraulic presses, with movable gantry and adjustable head, available in three powers from 80 to 150 tons. They are specifically designed for the straightening of welded structures and plates cut by oxy-fuel or laser. Its design facilitates the loading and unloading of large parts, plates or structures, optimising working times. Thanks to the lateral displace ...
USED OBEDINENT ECCENTRIC PRESS DESCRIPTION: The frame and slide are constructed of cast steel, with dovetail guides, with a base intended for oil recovery and equipped with mechanical extractor. For the protection of the press and dies. It has two compensating cylinders, pneumatically driven, for balancing the slide and dies. The connecting rod is built in alloy steel and long dimensioned. The clutch-brake is electro-pneumatic actuated, equipped with a double-body safety solenoid valve with cross-flows. Lubrication is carried out by means of a centralised manual pump and the pneumatic installation is equipped with a compensation tank, filter-regulator-lubricator unit with a control pressure switch and safety valve. On the front of the press is the two-handed shot, with an emergency stop button and a stop button in upper neutral. OB-100 TECHNICAL SPECIFICATIO ...
pressure: 100 t throat: 315 mm stroke: 8 - 112 mm table surface area: 725 x 570 mm ram surface: 410 x 315 mm ram adjustment: 80 mm no. of strokes: 55 / 82 Hub/min tool shank hole (depth x diameter): 85 x 50 mm dayligth: 355 mm total power requirement: 7,5 kW weight of the machine ca.: 6 t dimensions of machine L x W x H: 2,00 x 1,00 x 2,87 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
COMAP packaging press mod. SC-10 - CE compliant - used - Parcel dimensions H 750 mm W 1000 mm D 700 mm - Strength Kgf 1000 - Loading width: 1000 mm. - Loading depth: 700 mm. - Loading height : 1390 mm. - Complete with manual - Year 1996
Control Thrust... 80t Bending length ... 2620mm controlled axes ... 4 Plunger stroke... 200mm Machine weight ... 5750kg The machine is in good condition, possible to test under power.
2.1.1. Walk-in cleaning booth, pre-treatment for steel and aluminium The cleaning booth is designed for automatic cleaning. Spraying can be done at medium pressure. There are 7 different spray tanks in the cabin. The part sizes are max. L= 6,000mm, W= 2,000mm, H= 2,300mm. 1 Dimensions of the cab length 6,500 mm Width 3,000 mm Height 3,600 mm 2 dimensions of the pre-treatment complete Length 6,600 mm Width 4,640 mm Debpm0Nom Height 4,300 mm 2.1.1.1. 1. Degreasing/Neutral Pickling Process Heated bowl, 50-55°C, time = 3-6 minutes, draining time = 80 seconds 2.1.1.2. 2. Process Acid Mineral Pickling Heated bowl, 50-55°C, time = 3-6 minutes, draining time = 80 seconds 2.1.1.3. 3. Rinsing Process 1 in this chamber rinsing is done at ambient temperature, time = 0.75-1.5 minutes, draining time = 1 minute 2.1.1.4. 4. Rinsing Process 2 in this chamber is rinsed at ambient tem ...
5 and 10 liter capacity, up to 6 bar Auction-ID: A1-50251-521
Millutensil spotting press BV25/PM - Output force adjustable (with max. pressure): 100 - 800 kgf - Ejector stroke max.: 120 mm - Hydraulic pressure adjustable from 5 - 100 bar - Width: 150 cm - Depth: 150 cm - Height: 200 cm - With operating instructions Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.
COLLY 1410S Press brake Bedknife Multi V-shaped clamp Capacity 140 t x 4050 mm Max. operating pressure 220 Passage between uprights 3100 mm Max stroke 7 - 250 mm Max distance between table and ram 500 mm Depth of throat 300 mm Table width 190 mm Locking speed 40 mm/sec Working speed 7 mm/sec Returning speed 50 mm/sec Dimensions 4250x1800x2995mm
maximum number of results exceeded
please refine your search
10 € 
