136,827 used machines on RESALE, but how to find them? Machine Search
SCA Air Driven Piston Pump Max. Temp. 100 °C Material pressure 350 bar More items - new and used - can be found in our shop! International shipping costs on request!
Key data: 40 t, 2000 mm
Inv. Num. : 8524 Type: PPM 20040 Producer: HACO Created: 2015 Parameters: Compressive force: 40 t Maximum bending length: 2000 mm
Filter Cloth for Chamber Filter Press Length plate format in mm: 2000 Width flap format in mm: 1500 Cloth Design: Through-Hole Cloth with Velcro Hem in mm: 30
SCA Air Driven Piston Pump Max. Temp. 100 °C Material pressure 350 bar Dimensions: 1050 x 650 x 2000 mm More items - new and used - can be found in our shop! International shipping costs on request!
1 set (100pcs.) of filtercloth for FILOX filterpresses 29441 and 29445
pressure: 50 t chamfer lenght: 2500 mm distance between columns: 2050 mm throat: 200 mm table width: 140 mm table height: 750 mm distance table - lower edge of ram: 300 mm max. ram stroke: 100 mm closing speed: 9 - 160 mm/sec return speed: 55 mm/sec voltage: 380 V / 50 Hz engine output: 4,1 kW total power requirement: 5 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: 3, x 1,2 x 2,6 m Equipment: • manuel back stop • upper and lower tools Split , lower tool 2000 mm long • 2 manual operation / foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: LVD Model: PPEBturbo 220 Type: PPEB-EFL 220/30 Year of manufacture: 2006 Serial Number: 30494 Technical parameters: Max. Pressing force: 2,200 kN (220 tonnes) Working length: 3050 mm Distance between columns: 2600 mm Max. Slider Stroke: 450mm Max. Table-to-Slider Distance: 685 mm Outreach (throat): 450 mm X-axis travel: 600 mm Table width: 120 mm Speeds: Travel speed: 120 mm/s Working speed: 21 mm/s Return speed: 200 mm/s Drive and hydraulics: Motor power: 37 kW Power supply: 400 V Pump: adjustable Hydraulics: Bosch / Rexroth SYDFE1 Oil tank: 350 l Other data: Control: LVD Cadman CNC Noise level: 80 dB(A) Machine weight: approx. 14,500 kg Axes: Y-beam top down X-bumper approach and bending distance setting R-bumper top down 2 x Z-side and side-by-side bumper turnout Z 2 - ...
- CNC Crowning - Hydraulic tool clamping - EFL Easy form laser measuring & correction system - Set Tooling - Laser guide protection - Controlled axis Y1/Y2/X/R/V-Axis
A vertical internal broaching machine Frömag is available. Broaching tools: 3, stroke: 800mm, pulling force: 60kN, connected load: 15kW. Machine dimensions X/Y/Z: approx. 1050mm/900mm/3800mm, control: Frömag Commander PP-10. An on-site inspection is possible.
Manufacturer: HACO Model: PPM 30150 Year of Manufacture: 2007 Voltage: 380V 50Hz Capacity : 3000 x 150T Find more here - .ucymachines/ Contact us at - sales@ucymachines
General SKUR0083 LocationBarneveld Main Features Capacity3 KW Motor0.37 KW Temp.90 °C Specified Features - Temperature control unit Vessel sizesdia. 270x400mm Top connections2 Outletdia 40mm Temperature control units Water heatercheck Electric heatingcheck Heating medium:Fluid Electric capacity3 kW With pump0,37 kW 220-240/380-415 Volt With control30-90 °C MaterialStainless steel General MakeUnknown manufacturer plate is missing Year of constructionunknown Mounted on framecheck Floorspace0,6x0,6 M Total height1,3 M Weight100 KgPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalGreen FridayRubberBiotechnologyAgrochemicalsSpicesTemperature control unitsPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & ...
on offer are Powers Stations from the manufacturer Bluesun, model BSM-PPS2200 with 2,048 Wh lLFePO4 memory - unused and in their original packaging. Technical data: - BSM PPS2000: 2,200 W continuous power, 4,400 W peak, LiFePO4 2,048 Wh. - Pure Sine Wave, UPS function and solar input up to 500 W. - Manufacturer's information: 3,500 charging cycles up to SOH >= 70 %. - Modularly expandable There are 25 devices, the price is per device. In another ad, we offer suitable expansion batteries with the Bluesun BSM-B200, Wh 2.048, but these are expressly not the subject of this ad. The devices are currently at our customer in Magdeburg and are being sold due to a restructuring. Only the offered assets are expressly sold, any items that can be seen in the photos are expressly not part of the scope of the offer. We sell the assets on behalf of our customers. The offe ...
Arburg A10VSO 28 DR/31R-PPA12N00-SO109 Rexroth Axialkolbenpumpe Hydraulikpumpe Hersteller: Arburg / Rexroth Teilenummer: Ident.nr. 00911110 Type: A10VSO 28 DR/31R-PPA12N00-SO109 Anwendung: Ersatzteil für Spritzgussmaschinen Zustand: gebraucht, geprüft, voll funktionsfähig Referenznummer: 3110028
Brand: Nordson PPS Type: Vacuüm oven Model: JCP Mini 2424 Dry Air Quantity : 200 m3 / h Dimensions (LxWxH): 910 x 755 x 1.120
turning diameter: - mm turning length: - mm swing diameter over bed slide: - mm total power requirement: - kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
General SKU312X491 LocationBarneveld CEcheck MakePallmann Main Features Motor33 KW Inlet diameter120 mm Specified Features - Fine Impact Mill Turbo cone millcheck 2 Driven rotorscheck Rotor sizeInner roter ø 396 mm: outer roter 400 mm With grinding trackConidur 1,5: 2: 3 Housing dimensions ø 800 mm Inletø 120 mm Motor22 kW 400 V, 1470 rpm: 11 kW 400 V, 1475 rpm SpeedInner rotor 3000 rpm, outer rotor 1500 rpm Fine Impact Mills MaterialStainless steel 1.4552 General TypePPS 4-120 No.139820170004 Year of construction2018 Mounted on framecheck Floor space0,9 x 2,8 m Total height1,5 m Weight1600 kgPowdered foodsGeneric medicinesStarchAgrochemicalsSpicesPlastic & polymersFine Impact MillsCatalysts & fillersFeed additivesDetergent & surf.CosmeticsOrganicsE-waste & metalFood additivesSugarAnimal feedConfectionerySolid pharmaceuticsDyes & pigmentsBiopharmaceuticalPla ...
This 5-axis LVD PPEB 110/30 Press Brake was manufactured in 2001. It offers robust performance for precision bending operations. If you are looking to get high-quality bending capabilities, consider the LVD PPEB 110/30 machine we have for sale. Contact us for more information about this machine.
Bending press model PPC/e 120 ton 2000x1400 mm Arranged for high frequency technology TECHNICAL CHARACTERISTICS Platens size 2000x1400 mm Platens Arranged for High Frequency technology Supports for molds Included for 2 compartments (molds are not included) Pressing cylinders N° 6 cylinders Ø 85 mm Stroke 650 mm Opening size 1200 mm Type of stroke Driving platen: lower (from bottom to top) Total thrust 120 ton Specific pressure 4,28 kg / cm2 Control Board Standard panel; electrical panel with double button and adjustable pressure gauge with pressure recovery. Opening Automatic with timer Power supply 400V, 50Hz, 3ph Safety devices - Emergency button - Two hands control - Manual closing guillotine protection on front - Metallic protective nets on the sides - Aluminum foil connected to the generator Normative CE standards Press Structure The press structure is made of S275JR beams ...
A fully automatic unscrewing machine M. Adelski is available. Unscrewing heads: 5, capacity range: 2000-12500bottles/h, working height: 1090mm, bottle types: NRW/Euro, bottle volume: 0.5l, machine dimensions X/Y: approx. 950mm/850mm, weight: approx. 1400kg, operating hours: approx. 8500h. Documentation available. An on-site inspection is possible.
This 5-axis HABRAMA PPSM 2200 was manufactured in 2009. It features a robust workbench of 390 x 3750 mm, supporting a maximum table load of 4000 kg. The grinding head offers a drive power of 45 kW and a spindle speed of up to 4000 rpm. With a total power consumption of 100 kVA and a weight of 20,000 kg, this machine ensures precision and efficiency for complex grinding tasks. Contact us for more information about this machine.
General SKU304P677 MakeNiro T.K.Fielder Limited (U.K.) TypePP1 Pharma Matrix Mach.No.8255 Year of construction1994 Main Features MaterialStainless steel Volume10 Ltr. Motor3 KW Specified Features - Universal mixer Universal mixercheck Capacity10 Ltr Vessel sizesdia.280mm x200mm With covercheck Inletdia.20mm With motor3,0 KW, 240/415 Volt (EEx-d IIB T5) With variable speed drivecheck Rotor speed300-1500 rpm With lump breaker/ granulator With motor0,55 KW, 240 Volt (EEx-d IIB T4) Rotor speed1500/3000 rpm With timercheck MaterialStainless steel General LocationBarneveld Mount.on stainless steel framecheck With switchcheck With switchgear(as is) Floorspace1,0x0,8 M Total height1,6 M ATEX designedcheckPowdered foodsGeneric medicinesCatalysts & fillersUniversal mixersDetergent & surf.CosmeticsFood additivesLubricants & oleoConfectionerySolid pharmaceuticsBeverag ...
Haco PPES 110 ton x 4100 mm CNC Capacity: 110 ton x 4100 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 3600 mm Max stroke: 130 mm Max distance between table -- ram: 325 mm Depth of throat: 250 mm Table width: 180 mm Locking speed: 100 mm/sec Working speed: 11 mm/sec Returning speed: 100 mm/sec Electric motor (power): 11,4 kW Length: 4210 mm Depth: 1500 mm Height: 2530 mm Weight: 11 ton
9 assen: Y1 / Y2 / X / R / Z / V / X1 / X2 / X3 3 CNC-gestuurde frontplaatsteunen Capacity: 2000 ton x 14 meter Backgauge: CNC Control: 2D Touch Passage between uprights: 12470 mm Max stroke: 900 mm Max distance between table -- ram: 1600 mm Depth of throat: 1255 mm Table width: 800 mm Locking speed: 77 mm/sec Working speed: 9 mm/sec Returning speed: 85 mm/sec Electric motor (power): 2x 90 kW Length: 16835 mm Depth: 5695 mm Height: 6750 mm (above floorlevel) Weight: 370 ton Capacity: 2000 ton Bending length: 14 000 mm
3 assen: Y1 / Y2 / X Handmatige bombeertafel De achterkant van de machine is gesloten. Capacity: 175 ton x 3600 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 3150 mm Max stroke: 200 mm Max distance between table -- ram: 450 mm Depth of throat: 300 mm Locking speed: 80 mm/sec Working speed: 9 mm/sec Returning speed: 95 mm/sec Electric motor (power): 15 kW Length: 3880 mm Depth: 1750 mm Height: 2750 mm Weight: 13,4 ton
Key data: 100 mm, 160 mm, 115 mm
Profile bending machine model PP100 Output shafts 100 mm fully hydraulic operated lower shafts motion independent pyramid pinch -all the 3 shafts driven with gear unit and hydraulic motor -lateral correctors left/right for guiding and align the profile, -Set of rollers complete with extra rollers to seat and bend the various shape of profiles. -7 set of rollers for pipe bending from 1,5” to 4,5” inch ( see photo in enclosed ) -Centralized control panel electric with digital position readout -Safety & emergency installation -voltage 3ph 380/50 -10 Hp -capacity chart in enclosed
Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 80 mm -Piston diameter: 63 mm -Piston rod: 20 mm -End position cushioning: adjustable on both sides -Max. Pressure: 12 bar -Price: per piece -Number: 1 pieces -Dimensions: 285/75/H75 mm -Weight: 2.35 kg/piece
Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo type DNU-63-500-PPV-A -Piston diameter: 63 mm -Stroke: 500 mm -Max. Pressure: 12 bar -Pneumatic damping: adjustable on both sides -Price: per piece -Number: 2 pieces -Dimensions: 690/80/H80 mm -Weight: 4.5 kg
Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Festo: DGS-25-80-PPv -Stroke: 80 mm -Piston: Ø 25 mm -Piston rod: Ø 10 mm -End position cushioning: adjustable on both sides -Price: per piece -Number: 2 pieces -Dimension: Ø 33/220 mm -Weight: 0.65 kg
Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Festo: DSW-40-200 PPV-A -Stroke: 200 mm -Piston diameter: 40 mm -Piston rod: 14 mm -Connection piston rod: M12x1.75 -End position cushioning: adjustable on both sides -Number: 2x available -Price: per piece -Dimensions: Ø 46/395 mm -Weight: 1.25 kg
Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Type: DN-63-950-PPV-A -Piston: Ø 63 mm -Stroke: 950 mm -Pressure: max. 12 bar -Pneumatic damping: adjustable on both sides -Number: 1x available -Price: per piece -Dimensions: 80/80/H1120 mm -Weight: 8.8 kg
Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 120 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm -Total length: 345 mm -Total length extended: 465 mm -End position cushioning: adjustable on both sides -Number: 1x available -Price: per piece -Dimensions: 52/H345 mm -Weight: 3 kg
Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Type: DC-35-400-PPV -Piston: Ø 35 mm -Stroke: 400 mm -Pressure: max. 12 bar -Pneumatic damping: adjustable on both sides -Number: 1x available -Price: per piece -Dimensions: 65/58/H555 mm -Weight: 2.45 kg
Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 350 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm -Total length: 580 mm -Total length extended: 930 mm -End position cushioning: adjustable on both sides -Number: 2x available -Price: per piece -Dimensions: 52/H580 mm -Weight: 4.3 kg
Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Type: DC-50-400-PPV -Piston: Ø 50 mm -Stroke: 400 mm -Pressure: max. 12 bar -Pneumatic damping: adjustable on both sides -Quantity: 1 available -Price: per piece -Dimensions: 70/70/H576 mm -Weight: 4.65 kg
Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Type: DC-50-500-PPV -Piston: Ø 50 mm -Stroke: 500 mm -Pressure: max. 12 bar -Pneumatic damping: adjustable on both sides -Number: 1x available -Price: per piece -Dimensions: 70/70/H585 mm -Weight: 4.65 kg
Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Type: DC-100-100-PPV -Piston: Ø 100 mm -Stroke: 100 mm -Pressure: max. 12 bar -Pneumatic damping: adjustable on both sides -Number: 1x available -Price: per piece -Dimensions: 138/H395 mm -Weight: 5.75 kg
Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Type: DN-63-300-PPV -Piston: Ø 63 mm -Stroke: 300 mm -Pressure: max. 12 bar -Pneumatic damping: adjustable on both sides -Number: 2x available -Price: per piece -Dimensions: 80/80/H490 mm -Weight: 3.85 kg
Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 450 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm -Total length: 675 mm -Total length extended: 1125 mm -End position cushioning: adjustable on both sides -Number: 1x available -Price: per piece -Dimensions: 52/H675 mm -Weight: 4.8 kg
Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Type: DN-80-400-PPV -Piston: Ø 80 mm -Stroke: 400 mm -Pressure: max. 12 bar -Pneumatic damping: adjustable on both sides -Number: 1x available -Price: per piece -Dimensions: 97/97/H675 mm -Weight: 8.3 kg
Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 100 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm -Total length: 335 mm -Total length extended: 435 mm -End position cushioning: adjustable on both sides -Number: 2x available -Price: per piece -Dimensions: 48/335 mm -Weight: 2.75 kg
Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Type: DNC-32-400-PPV-A -Piston: Ø 32 mm -Stroke: 400 mm -Pressure: max. 12 bar -Pneumatic damping: adjustable on both sides -for: proximity switch -Number: 1x available -Price: per piece -Dimensions: 45/45/H545 mm -Weight: 1.7 kg
Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Type: DN-80-25-PPV -Piston: Ø 80 mm -Stroke: 25 mm -Pressure: max. 12 bar -Pneumatic damping: adjustable on both sides -Number: 2x available -Price: per piece -Dimensions: 95/95/H245 mm -Weight: 4 kg
Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Type: DKE-40-800-PPV-A -Piston: Ø 40 -Stroke: 800 mm -Pressure: max. 10 bar -integrated clamping unit -PPV Pneumatic cushioning: adjustable on both sides -A for proximity switches -Number: 1x cylinder available -Price: per piece -Weight: 18.7 kg
Pneumatic cylinders, air cylinders, pneumatic stamps, air stamps, standard cylinders, clamping cylinders -Manufacturer: Festo, standard cylinder type DNC-100-700-PPV-A -Lifting stroke: 700 mm -Piston: Ø 100 mm -Piston rod: Ø 25 mm / M20 x 1.5 -Max. Pressure: 10 bars -Dimensions: 925/110/H165 mm -Weight: 12 kg
Pneumatic cylinders, air cylinders, pneumatic stamps, air stamps, standard cylinders, clamping cylinders -Handover: in current condition as seen -Piston rod: without threaded attachment -Manufacturer: Festo, standard cylinder type DNC-32-170-PPV-A -Stroke path: 170 mm -Piston: Ø 32 mm -Piston rod: Ø 12 mm / without threaded attachment -Max. Pressure: 12 bar -Dimensions: 295/45/H73 mm -Weight: 1.0 kg
Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, round cylinder -Manufacturer: Festo, standard cylinder type DSNU-32-180-PPS-A with proximity switch -Stroke path: 180 mm -Piston: Ø 32 mm -Piston rod: Ø 12 mm / M 10 x 1.25 -Dimension: 330/38/H65 mm -Weight: 0.6 kg
Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, round cylinder -Manufacturer: Festo, standard cylinder type DSNU-32-125-PPS-A with proximity switch -Stroke path: 125 mm -Piston: Ø 32 mm -Piston rod: Ø 12 mm / M 10 x 1.25 -Quantity: 2x cylinders available -Price per piece -Dimension: 280/42/H65 mm -Weight: 0.6 kg/pc.
Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, round cylinder -Manufacturer: Festo, standard cylinder type DSNU-32-125-PPS-A with proximity switch -Stroke distance: 75 mm -Piston: Ø 32 mm -Piston rod: Ø 10 mm / M 10 x 1.25 -Proximity switch: 2 pieces, see photos -Quantity: 4x cylinders available -Price per piece -Dimension: 200/40/H60 mm -Weight: 0.4 kg/pc.
maximum number of results exceeded
please refine your search
