137,192 used machines on RESALE, but how to find them? Machine Search
Horizontal peeling centrifuge Peony PPCS-555 used for solid-liquid separation in chemical, pharmaceutical &food industry. Horizontal peeling joints are discontinuous filtration centrifuges that are characterized by absolute reliability, even with the highest requirements. They are used in the production of mass, raw material and fine chemicals as well as in the food industry. Manufacturer: Peony Type: PPCS-555 Year: 2013 Drum diameter: 1250 mm Volume: 370 liters Capacity: 555 kg Total 3 pieces available - Horizontal shaft trifuge with perforated filter drum. - Hydraulically actuated wide knife peeling device. - Solid discharge in one of the centrifuges with schurre, in the other two with discharge screw. - Drive via V-belt. - Application discontinuously in batch operation for mechanical solid-liquid separation. - High separation and washing effect, low residual moistu ...
Matrix printer, continuous paper printer Manufacturer: PSi Type: PP405 Year of construction: 2011 Fully functional Voltage: 220V There are a total of 8 pieces. The price is for 1 piece All information without guarantee
Rated output at 50% ED: 60kVA Short circuit current: 24kA Electrode force: 470daN / easy lift Throat depth: 435mm Arm distance, infinitely variable: 180-510 mm Electrodes Cone: Mk2 --- Welding control: WS 708 (7-times, 8-program) --- Incl. additional options: -Two hand start / footswitch -Main switch --- Warranty 6 months --- Training + commissioning on request --- Point welding electrodes + spares available from stock
L 45 Kw POWER 680 Kg/h (material-dependent/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSING SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for the wood chip raw material - Pellet mill with main motor 45 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system for controlling the clogging of the matrice Moisture monitoring - Cooling and dedusting system for the pellets produced via a screw
L 30 Kw POWER 450 Kg/h (material-dependent/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSING SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for the wood chip raw material - Pellet mill with main motor 30 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system for controlling the clogging of the matrice Moisture monitoring - Cooling and dedusting system for the pellets produced via a screw
Linear actuator, DGPL-050-865-PPV-A-KF-B, 161795, Festo, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.
l 90 kw POWER 1350 kg/h (depending on material/full load) Active process and computer-controlled Koller PP 500 is a pellet line consisting of the following machines: - DOSAGE SYSTEM with an automatic PLC control of the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for wood chip raw material - Pellet mill with main motor 90 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system to control the blockage of the Matritze Humidity monitoring - Cooling and dedusting system for the pellets produced via a screw
l 45 kw POWER 680 kg/h (depending on material/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSAGE SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for wood chip raw material - Pellet mill with main motor 45 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system to control the blockage of the Matritze Humidity monitoring - Cooling and dedusting system for the pellets produced via a screw
l 45 kw POWER 680 kg/h (depending on material/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSAGE SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for wood chip raw material - Pellet mill with main motor 45 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system to control the blockage of the Matritze Humidity monitoring - Cooling and dedusting system for the pellets produced via a screw
Standard cylinder with locking unit, DNC-125-500-PPV-A-KP, 163494, Festo, used Top Special price For your info - The current new discounted price of a similar product is € 1955 excl. VAT. If you have a VAT number, we will gladly issue you an invoice without VAT. Used - top condition The part was purchased from a company's spare parts warehouse, was only used for a very short time and is in very good condition. Standard cylinder with locking unit, DNC-125-500-PPV-A-KP, 163494, Festo, used-Top, consists of: - Standard cylinder DNC-125-PPV-A (current discounted new price € 419 excl. VAT) - Locking unit KPE-32 (current discounted new price € 1536 excl. VAT) - and a longer piston rod Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, wh ...
Linear drive, stroke 420mm, DGPL-80-420-PPV-A-KF-B, 161797, Festo, used tested Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used and tested! The part was purchased from a spare parts warehouse of a company, was tested by us and checked for leaks. Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the seller, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updating in case of digital components. Also excluded is the liability for direct and indirect consequential damages. Our terms and conditions appl ...
SCHENCK hydraulic power unit type PP165 B Used hydraulic power unit Ready to connect and ready for use. Used for servo hydraulics Incl. comprehensive and serviced components (see pictures). Aggregate rental possible. Other power units and hydraulic components available on request (sale/rental). Nominal pressure 315 bar Nominal flow rate 165 l/min Fuel tank capacity 0.95 m³ Year of manufacture 1987 All machines can be viewed in Kassel by arrangement. We would like to point out that the machines offered are used machines and not new machines! The sale of used goods is only to tradespeople within the meaning of § 14 BGB under exclusion of any warranty and return in the actual condition. Upon purchase, you will receive an invoice with VAT (19%). Pick-up in 34123 Kassel, free loaded with forklift. You are also welcome to have the machine picked up by a forwarding a ...
Rated power at 50%ED: 35kVA Short circuit current: 19kA Electrode force: 300daN / single stroke Projection: 395mm --- Welding control: WS 708 (7 times, 8 program) --- Incl. additional options: - Foot switch - Pressure-free lowering of the upper fitting - Main switch --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock
pressure: 320 t chamfer lenght: 4000 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 25 t dimensions of the machine ca.: m Brand: LVD Type: PPEB 320/40 CNC brand: Morris CNC model: Solutions ESA 630 Year of make: 1990 Hydraulic Capacity: 320 T Bend length: 4.000 mm Multi V + J-knive Steered backstop X+R Incl. 1 Set of tools Machine weight: 25.000 kg Machine is flat on the ground The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
SCHENCK hydraulic power unit type PP165 B Used hydraulic power unit Ready to connect and ready for use. Used for servo hydraulics Incl. comprehensive and serviced components (see pictures). Aggregate rental possible. Other power units and hydraulic components available on request (sale/rental). Nominal pressure 315 bar Nominal flow rate 165 l/min Tank capacity 1 m³ Year of manufacture 1991 All machines can be viewed in Kassel by arrangement. We would like to point out that the machines offered are used machines and not new machines! The sale of used goods is only to tradespeople within the meaning of § 14 BGB under exclusion of any warranty and return in the actual condition. Upon purchase, you will receive an invoice with VAT (19%). Pick-up in 34123 Kassel, free loaded with forklift. You are also welcome to have the machine picked up by a forwarding agent, we ...
L 22 Kw POWER 330 Kg/h (material-dependent/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSING SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for the wood chip raw material - Pellet mill with main motor 22 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system for controlling the clogging of the matrice Moisture monitoring - Cooling and dedusting system for the pellets produced via a screw
Festo pneumatic cylinders Pmax 12 Bar End positions with slot nuts Length 92 cm
used
Axial piston pump, E A10VSO 45 DFLR/31R-PPA12N00, Brüninghaus, mint condition Please note: This is an original Brüninghaus product and not a replica from Special offer! If you have a VAT number, we will be happy to issue you with an invoice without VAT. As good as new! The part comes from the spare parts warehouse of a certified manufacturing company, has been in storage for a long time, shows very few signs of storage, has never been used and is in mint condition. Axial piston pump, E A10VSO 45 DFLR/31R-PPA12N00, Brüninghaus, as good as new Drive shaft D25mm, 1450 rpm, DR 250 bar, 41 cm³ 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is ...
Axial piston pump, E A10VSO 18 DFR1/31R-PPA12N00, Brüninghaus, mint condition Attention: This is an original Brüninghaus product and not a replica from Special price If you have a VAT number, we will gladly issue you an invoice without VAT. New! The part was purchased from a company's spare parts warehouse, had been in storage for a long time, had never been used and is completely new. Axial piston pump, E A10VSO 18 DFR1/31R-PPA12N00, Original! Brüninghaus, neu Dr=140 bar, 1500 rpm, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and condition ...
Modell: PPK STADLER Motor: ELECTRIC Operative Data: W. 6.500 mm x L. 2.500 mm x H. 4.000 mm Hourly Production: 15 t/h N° Paddles: 2x 6 Pz Useful Length: 2.180 mm Power Consumption: 4 kW N° Fractions: 2 Weight: 8.000 Kg Treated Materials: PAPER / CARDBOARD
Drive : 75 KW Dimensions : L 3800 mm x W 1600 mm x H 2200 mm Weight : 3900 kg.
Axial piston pump, E A10VSO 71 DFR/31R-PPA12N00, Rexroth, used Please note: This is an original Rexroth product and not a replica from Special offer! If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! The part comes from the spare parts warehouse of a certified production company and is in very good condition. DR 200 bar, 71cm³, 1500rpm, Drive shaft D32mm Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer maximum the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updating in case of digital compon ...
Offer here a linear actuator with 30cm stroke and 8cm piston diameter. Ready to use with check valves, flanges, 16mm QuickLocks. It also comes with a plant dismantling and worked without any problems until the expansion. It can be seen in Weyhe near Bremen.
Ref. -No.: 10229 Manufacturer: GÖPPINGER Year of construction: 1953 Type of control: Konventionell Control: N/a Storage location: Halberstadt Country of origin: Deutschland Machine length: 4700 mm Machine width: 1450 mm Machine Height: 1300 mm Weight Of The Machine Ca.: 3,1 t Supply voltage: 380 V Turning Length: 3000 mm Turning Diameter Over Bed: 530 mm Centre Distance: 3050 mm Swing Diameter Over Bed Slide: 305 mm Spindle Bore: 58 mm Total Power Requirement: 5,5 kW Circulation in the crank: 720 mm
Offer 22564 Specifications: - Printing capacity 150 t - Working width 2600 mm - Passage between uprights 2100 mm - Table width 180 mm - Projection 250 mm - Installation height 325 mm - Drive 400 V / 7.5 kW - Space requirement approx. W 3000 x H 2400 x D 1600 mm - Weight approx. 7000 kg - With: - Two-hand control panel with foot switch
Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Manufacturer: Festo, Standard cylinder type DSBC-40-250-PPSA-N3 -Stroke travel: 250 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm -Dimensions: 610/55/H55 mm -Weight: 2.2 kg
Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Manufacturer: Festo, standard cylinder type DNC-40-80-PPV-A -Stroke: 80 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm/M12 x 1.25 -Price: per piece -Number: 2 piece -Dimensions: 240/55/H87 mm -Weight: 1.3 kg/piece
Pneumatic cylinder, flat cylinder, pneumatic drive, stamp, flat cylinder -Stroke: 1070 mm -Piston rod: Ø 20 mm -Pneumatic damping: adjustable on both sides -Price: per piece -Number: 2 pieces -Dimensions: 1250/100/H45 mm -Weight: 7.4 kg/piece
Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Manufacturer: Festo, standard cylinder type DNU-80-570-PPV-A -Stroke distance: 570 mm -Piston: Ø 80 mm -Piston rod: Ø 25 mm/M20x1.5 -Dimensions: 785/95/H95 mm -Weight: 7 kg
PPSM Habrama 2200 Precision Profile Grinding Machine Rack and Pinion Grinding Machine Manufacturer [manufacturer]: Habrama Type [ type]: PPSM 2200 Control unit: Siemens 840D sl Sinumerik Construction year: 10/2009 Travel paths: X-axis (longitudinal): 2200(2500)mm Y-axis (transverse): 500mm Z-axis (vertical): 410mm C-axis: +30°/-30° B-axis: +20°/-20° U-axis: 105mm W axis: 125mm B2 axis: +20°/-20° Workbench: 390 x 3.750mm Max. table load: 4000kg Feed speed X-axis [feed speed]: 21m/min Feed speed Y-axis [feed speed]: 10m/min Feed speed Z-axis [feed speed]: 6m/min Feed speed C-axis [feed speed]: 2m/min Feed speed B-axis [feed speed]: 6m/min Feed speed U-axis [feed speed]: 4m/min Feed speed W-axis [feed speed]: 4m/min Feed speed B2 axis [feed speed]: 6m/min Grinding head Drive power: 45kW (S6 at 40%) Spindle speed: max. 4000 1/min Grinding ...
Rotary Vane Pump / Vane Pump PF037200 Electric motor 400 V, 0.37 KW, 1410 rpm Brass Rotary Vane Pump with Clamping Ring Pumping capacity litres per hour: 200 l/h, G 3/8"
Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Manufacturer: Festo, standard cylinder type DNC-40-50-PPV -Stroke: 50 mm -Piston:Ø 40 mm -Piston rod: Ø 16 mm/M12 x 1.25 -Price: per piece -Number: 4 Stück -Dimensions: 213/53/H87 mm -Weight: 1.2 kg/piece
Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Manufacturer: Festo, standard cylinder type DNU-80-570-PPV-A -Stroke: 570 mm -Piston: Ø 80 mm -Piston rod: Ø 25 mm/M20x1,5 -Price: per piece -Number: 2 Stück -Dimensions: 840/95/H95 mm -Weight: 7,6 kg/piece
Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Festo type: DN-80-100-PPV -Piston diameter: 80 mm -Piston rod: Ø 25 mm -Stroke: 100 mm -Max. Pressure: 12 bar -Pneumatic damping: adjustable on both sides -Dimensions: 320/95/H125 mm -Weight: 4.8 kg
Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Manufacturer: Festo, Standard cylinder type DNU-50-250-PPV-A -Stroke travel: 250 mm -Piston: Ø 50 mm -Piston rod: Ø 20 mm/M16x1.5 -Price: per piece -Quantity: 2 pieces -Dimensions: 430/65/H65 mm -Weight: 2.4 kg/piece
Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 50 mm -Piston diameter: 20 mm -Piston rod: Ø 8 mm -Price: per piece -Number: 2 pieces -Dimension: Ø 27/188 mm -Weight: 0.3 kg/piece
Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Manufacturer: Festo, standard cylinder type DNU-32-420-PPV-A -Stroke: 420 mm -Piston: Ø 32 mm -Piston rod: Ø 12 mm / M10x1.25 -Quantity: 2 pieces -Price per piece -Dimensions: 590/90 / H70 mm -Weight: 1.9 kg/pc.
Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Festo type: DNC-40-160-PPV-A -Piston: Ø 40 mm -Stroke: 160 mm -Max. Pressure: 12 bar -Dimensions: 325/55/H55 mm -Weight: 1.5 kg
Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo type DNU-80-500-PPV-A -Piston diameter: 80 mm -Stroke: 500 mm -Max. Pressure: 12 bar -Pneumatic damping: adjustable on both sides -Dimensions: 730/155/H95 mm -Weight: 6.9 kg
Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 555 mm -Piston diameter: 80 mm -Type: DNC-80-555-PPV-A Q R3 -Pressure: max. 10 bar -Dimensions: 770/93/93 mm -Weight: 8.4 kg
Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Type: DNC-32-300-PPV-A -Piston diameter: 32 mm -Stroke: 300 mm -Pressure: max. 12 bar -Dimensions: 455/45/45 mm -Weight: 1.5 kg
Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Type: DNC-50-700-PPV-AQ -Pressure: max. 12 bar -Stroke: 700 mm -Piston diameter: 50 mm -Dimensions: 885/65/65 mm -Weight: 5.5 kg
Pneumatic cylinder, air cylinder, standard cylinder -Stroke: 1400 mm -Piston rod: Ø 15 mm -Recording piston rod: M12 x 1.5 mm -Pressure: max. 12 bar -Dimensions: 1570/50/H50 mm -Weight: 8.1 kg
Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Type: DN-100-125 PPV -Piston: Ø 100 mm -Stroke: 125 mm -Max. Pressure: 12 bar -Pneumatic damping: adjustable on both sides -Dimensions: 126/126/H358 mm -Weight: 8.3 kg
Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Piston rod: Ø 25 mm -Stroke: 100 mm -Dimensions: 95/95/H310 mm -Weight: 6.1 kg
Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Festo type: DNC-32-160-PPV-A -Piston: Ø 32 mm -Stroke: 160 mm -Max. Pressure: 12 bar -Price: per piece -Number: 2 pieces -Dimensions: 306/45/45 mm -Weight: 1 kg
Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Type: DNC-63-160-PPV-A -Piston: Ø 63 mm -Stroke: 160 mm -Max. pressure: 12 bar Quantity: 1 piece -Dimensions: 365/75/H75 mm -Weight: 2.9 kg
maximum number of results exceeded
please refine your search
