power press used for sale

RADAX high-pressure duct fan High-pressure duct fan with cylindrical pipe sleeve, flanges on both sides, directly driven. Cylindrical galvanized steel tube Sheet metal, with double-sided moulded Flange, hole pattern according to DIN 24155, recessed built guide wheel. Semi-axial impeller, eight spatially connected curved blades made of thermoplastic, Balancing quality G 6.3 according to VDI 2060 and DIN ISO 1940. Three-phase squirrel-cage motor by Voltage reduction speed controllable, Thermal contacts, closed design, maintenance-free, sealed, low-noise Ball bearings with long-term lubrication. Fan data (default) Seawater version. Also resistant to weak acids and alkalis. NEW!

Qty. 1 Second-hand press for production of Aluminium pots and discs Mfc.: SITI Built: 2005 Renewed in by experts Duration: 3-4 months Force: 4000 Ton Production of Aluminium discs & induction & normal pots Pots height: 120 / 140 mm The press will be overhauled and revamped and sold as specified below: New Piston Grinding of cylinder New Flange Table modification New pumps New gaskets etc . New electric and electronical parts New program

SPK KB 2132 eccentric press was manufactured in the USSR in 1980. Operating with a force of 160 tonnes, the press of almost indestructible design offers the highest quality and precision during the most demanding workpiece machining. The machine’s equipment includes among others a pneumatic clutch, a large-area slider performing up to 71 strokes per minute, central lubrication and manual control. The total weight of the press is 13200 kg. Technical data of the SPK KB 2132 press - maximum press force: 160 t - work table dimensions (L x W): 1000 x 700 mm - maximum slider stroke: 160 mm - minimum slider stroke: 25 mm - slider dimensions (L x W): 580 x 460 mm - slider adjustment range: 120 mm - slider stroke rate: 71/min - intermediate plate thickness: 110 mm - distance between work table and slider (slider in lower position, largest stroke, connector unscrewed): 480 mm - bore ...

Manesty Drycota 900 23 Station Double Headed Tablet Press with Type D Tooling • This Double Headed Tablet Press is Mounted on a Common Chassis Plate and Driven via Line Shaft by a Common Drive • Twin Single Compression • Turrets Are Each Fitted With 23 Type D Stations • Upper Keyed Tooling • Removed Side Attached Operation Control Panel N°. of Stations: 23 Voltage: 400 VOLTS Frequency: 50 HERTZ Phase: 3

Nominal force: 6300 ton Number of continuous strokes per minute: 40 Ram stroke: 460 mm Distance between ram and table (table is in upper position): 1150 mm Table adjustment: 15 mm Distance between press columns: 1950 mm Ram dimensions: -front to back: 1680 mm; -left to right: 1680 mm Table dimensions: -front to back: 1950 mm; -left to right: 1920 mm Mechanical upper ejector: -max stroke: 100 mm; -number of positions: 1 -steps of stroke adjustment: 25-30-75 mm -force: 30 ton Pneumatic lower ejector: -max stroke: 300 mm -stepless stroke adjustment: 15-300 mm -number of positions: 3; -force: 65 ton Side windows dimensions: -width: 1100 mm; -height: 1280 mm Main motor: 400/590 kW/rpm Press layout dimensions: 6300x8965 mm Total height: 11125 mm Height above floor level: 9150 mm Total weight: 626100 kg

Rotary tablet press SPT- TP500D with double-sided press; Brvyulnw 2 layered production; Touch screen, PLC Control Panel; HMI (Human Macshine Interface); SPT-TP 500D Number of stations (Max.) D=41 B=49 BB=59 1 Max tablet ejection (two-sided) T/h 270 000 360 000 420 000 Max tablet ejection 2 layer T/h 90 000 115 000 140 000 2 Max.Tab.Diameter Round mm 13 16 25 Form 14 19 25 3 Max tablet thickness mm 8.5 4 Max main pressing force t 10 6 Dimensions mm 1150 x 1550 x 1950

Qty. 1 Second-hand extrusion press including log furnace Mfc.: SMS Built: 1986 Force: 960 MT (9.3 MN) Press jaw: Wide: 155 mm Height: 140 mm Max. inlet: 130 mm (144 mm block, 5 mm protection per side) Recipient: 149,9 mm Extras: Heatable tool cassette from Marx (installed 2016) Conversion of recipient to resistance heating (beginning of 2016) Punch press disc: 149,2 mm Broaching disc: 150 mm Billet Ø: 144 mm Length: 265 – 540 mm Log length: 3000-4800 mm Log Furnace Mfc.: Extrutec GmbH Built: Temperature: 480-520 °C Zone 1: 460-490 °C Zone 2: 440-470 °C Zone 3: 400-450 °C Table weight: Max. 1350 g/m Min. 80 g/m Electrical control cabinet Puller Exhausting system Cooling device Spare parts for furnace combustion air Spare parts head burner Spare parts oven stove bo ...

Rotation tablet press SPT-TP 400 with high production capacity; Touch screen, PLC Control Panel; HMI (Human Macshine Interface); SPT-TP 400 Number of stations (Max.) D=30 B=36 BB=45 1 Max tablet ejection/hour T/h 125000 170 000 215 000 2 Max.Tab.Diameter Round mm 13 16 25 Mould mm 14 19 25 3 Max tablet thickness mm 8.5 4 Max main pressing force t 10 5 Max pre-press force t 2 Hqgonxsno 6 Dimensions mm 1000 x 1230 x 2000

TECHNICAL SPECIFICATIONS Manufacturer: HENKE Designation: Production plant for concrete block slabs Type: UNI 2000 Year of construction: 1995 Operating hours: 11,543 h COMPOSED OF: Item 010) Fully automatic rotary table top pressure press UNI 2000/600/7 Item 020) Attachment distribution device for fine-grained attachments Pos. 030) Fully automatic dividing disc dosing unit with 8-fold ejection Item 040) Fully automatic direct washout system "WESER 100/2" for flat laying (horizontal) Item 050) Moulding frame device 400 x 400 mm, 2-fold Pos. 070) 2 x chain conveyor 1.50 m long Item 080/120) Pallet destacker Item 090) Cleaning brush Item 100) Pallet oil roller Item 110) Intermediate transport Pos. 130) Plate removal device Item 160) Stacking arm with bearing block Item 170) Chain conveyor 5 m long Pos. 180) 2 x Plate Pack - Lifting Item 190) Parcel push-off device  ...

JJZ-CP type press designed for the production of plywood, doors, MDF. The glued elements are fed and removed from the press automatically by means of driven rollers. The press can be used with glue feeders. Specifications: -max. pressure 500T/ adjustable/ -max. load height 1300mm -max. batch size 1300x2500 -press size 3600x1370x4500 mm -press foundation ~500 mm below the floor level -feeding table 2000x1960 mm -receiving table 2350x2500 mm -max. power 13.2 kW -Ce -capacity of 6 batches per hour Currently, we glue panel doors and MDF board on presses. Very good technical condition. We offer a plywood production line dedicated to these presses.

The small rotary tablet press SPT-TPL 200 (small scale production); Touch screen, PLC control platform; HMI system; Bczkcapdbh The machines comply with the requirements of the GMP guidelines and are CE certified; Number of stations (Max.) D=13 B=16 BB=19 1 Max tablet ejection/hour T/h 46 000 57 000 68 000 2 Max.Tab.Diameter Round mm 25 16 13 Shape mm 25 19 14 3 Max tablet thickness mm 8.5 4 Max main pressing force t 5 5 Max pre-press force t 1 6 Dimensions mm 600 x 1106 x 1705

Bucher Press HP 5000

Machine type: Hose press / pneumatic Manufacturer: Peters Type: NDP YOC 2000 Condition: used / good Offer will only be sent if a complete imprint is provided! Price 1.250 Euro incl. 19% VAT free loaded. Location Warstein , Germany Reference M-PET-0124 DESCRIPTION We offer you a used hose press from the manufacturer Peters. Data to follow. Heavy-duty design Pressure 8 bar Availability: immediately Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions and payment terms. Errors in the descriptions and offers are excepted!

Stainless steel pedestal for bread presses / dough-sharing machines suitable for all common bread presses massive construction resilient with 1 to easy lifting with the lift truck Stainless steel for optimal cleaning Dimensions: 735 x 640 x 170 mm, WxDxH Visit our large bakery machinery warehouse!

M. No.: 121

THE WOOD PRESS FOR HIGH-QUALITY FUELS The RUF LIGNUM Classic wood briquette press is ideal for briquetting medium quantities of wood chips that accumulate in the woodworking industry. The briquetting process can generate additional revenue and reduce storage and transport costs. Another advantage is the flexibility of our wood briquette presses. You can press different material grains into high-quality briquettes without the need for a binder. As a result, RUF briquettes have a higher utility value and an optimal CO2 balance as a valuable energy source. Our LIGNUM series also impresses with high energy efficiency and low wear thanks to the innovative RUF hydraulics. YOUR BENEFITS AT A GLANCE - Fully automated 24-hour operation possible -Longevity - Low maintenance costs - Compact design - Direct integration into existing production facilities possible Bto8iej998 - Experience f ...

BRIQUETTING WOOD CHIPS AND GENERATING ADDITIONAL REVENUE With our RUF LIGNUM R4 wood briquetting press, you can process medium to large quantities of wood chips, regardless of the type of wood, into high-quality briquettes in the best possible way – without the use of binders. Through the process of briquetting, you achieve higher revenues and at the same time reduce transport and storage costs. Our robust wood briquetting presses of the LIGNUM series impress with a long service life, low wear and can be integrated directly into existing production systems. The innovative RUF hydraulics also ensure high energy efficiency. YOUR BENEFITS AT A GLANCE - Fully automated 24-hour operation possible - Durability & low wear - Low maintenance costs - Compact design - High energy efficiency - Experience for over 35 years ADVANTAGES OF RUF BRIQUETTES - Additional revenue for briquett ...

Storage tank / beer tank / pressure tank with cooling jacket round of V2A Operating pressure: 0.99 bar, test pressure: 1.7 bar Quantity: 100+ Content: 17-00047-1L 800 litres 17-00047-2L 1000 litres 17-00047-3L 1,200 litres 17-00047-4L 1,500 litres 17-00047-5L 1,800 litres 17-00047-6L 2,000 litres Material: V2A - AISI 304, 1.4301 Surface: inside and outside 2B=IIIC Topsoil: with pressure lid 390 mm with 1 x threaded welding nozzle DN 50 with 1 x overpressure valve with 1 x CO2 connection with 6 x star grip screws Cylider tank: with cooling jacket with 1 x beading stiffening Underbody: with forward-drawn outlet pipe DN 50 with disc valve with 4 stable feet can be underrun with pallet trucks

automatic baler Manufacturer: PRESONA Type: LP 65 VH 2 Year of construction: 2012 specifications: Press force: 65 t Specific pressing force: 7.87 kg/cm² Drive power: 45 kW Throughput: 370 m³/h Filling opening: 1,500 x 1,100 mm Channel format: 750 x 1,100 mm (H x W) Bale weights: up to approx. 425-575 kg Setting: 5-fold vertical Oil tank: approx. 1,000 ltr. capacity Machine weight: approx. 26 t Optionally with chain conveyor belt Manufacturer: BLUETECH Type: Chain Conveyor Belt Year of construction: 2012 Specifications: Conveyor width: approx. 1,500 mm Feed length: approx. 5,000 mm Climbing length: approx. 10,500 mm according to attached pictures

Storage Tank/ Pressure Tank/Beer tank 2400 liters in AISI 304 with cooling jacket Test pressure: 1,5 bar, Operating pressure: 0,99 bar - NEW Material: V2A – AISI 304 (1.4301) Operating pressere: 0,99 bar Surface inside IIIC Operating temperature in °C: 130 Upper body: Manhole lid round DN 400 with 6 screws With 1 Thread connection DN 50 and with handle bar With CO2-connection (extra charge) With overpressure valve (extra charge) Tank cylinder: With cooling jacket With connections for cooling jacket on the back inlet 1” AG, outlet 1¼”AG With connection for sample valve DN 15 ( sample valve - extra charge) With connection for temperature indicator 3/8 (temperature indicator - extra charge) Lower bottom: Rest outlet with butterfly valve DN 50 with conical bottom On 4 stable feet Easily movable with a m ...

EUROLUX ZKG Tanks/ Storage Tanks / Pressure Tanks/ Beer Tanks with cone floor with cooling jacket made of V2A Max operating pressure: 0.99 bar, test pressure: 1.5 bar Content: from 200 litres to 1,000 litres Kat No. 20-00071-1L 200 litres 20-00071-2L 300 litres 20-00071-3L 400 litres 20-00071-4L 500 litres 20-00071-5L 625 litres 20-00071-6L 750 litres 20-00071-7L 1,000 litres Material: V2A - AISI 304, 1.4301 Surface: outside marbled, inside 2B=IIIC Tank upper body: with manhole lid round Ø 400 mm with 2 x handle with 6 x screws with overpressure valve (on extra charge) with downward drawn filling pipe DN 32 with fermentation connector (with overpressure valve, with manometer) with 2 x thread connection DN 50 with CIP spray head/CIP cleaning (on extra charge) with cap nut DN 50 ball Ø 25 mm with connection for cleaning supply ...

automatic baler Manufacturer: PRESONA Type: LP 65 VH2 Year of construction: 2007 specifications: Press force: 65 t Specific pressing force: 7.27 kg/cm² max. oil pressure: 265 bar Press force pre-press: 25 t Drive power: 45 kW Throughput: approx. 370 m³/h Filling opening: 1,500 x 1,100 mm Channel format: 750 x 1,100 mm (H x W) Bale weights: up to approx. 420-570 kg Setting: 5-fold vertical Oil tank: approx. 1,000 ltr. capacity Machine weight: approx. 21 t Optionally with chain conveyor belt Manufacturer: BLUETECH Type: Chain Conveyor Belt Year of construction: 2007 Specifications: Conveyor width: approx. 1,500 mm Feed length: approx. 6,000 mm Climbing length: approx. 10,500 mm according to attached pictures Subject to errors in the technical data.

with 130 filling valves and 26head crown corker Year of manufacturing: 1994 capacity: approx. 50.000 bph Control system to Siemens S7 - 02/2011 Reconstruction capper to crown cork and Twist off, both is possible without conversion of the capping elements

Dynajet 500 me , NEW, Operating pressure: 500 bar, Number of foerders: 15 l/min, Drive: electric 15 kW, 400 volts, Engine hours: approx: 1, Trolly, incl. zubehoer,

Machine Name: Chamber Filter Press Manufacturer: Passavant Type: AX 1200 Year of construction: 1990 Design: Bridge spar press Filter pressure: 15 bar Press capacity: Approx. 1800 litres (expandable to 2500 litres) Expiration: Closed Filter area: Approx. 127 m2 (expandable to 175 m2) Plate size: 1200 x 1200 mm Number of plates: 51 (expandable to 70) Panel material: Polypropylene Plate Transport: Automatic Cake thickness: 30 mm Closing pressure: 360 bar Dimensions: L 8000 x W 1900 / 2500 x H 2300 + 600 mm Tech. Documentation: Yes Note: Available mid-February 2024 Accessories: A hydraulic system, a light barrier, a high-pressure pump Condition: Used Price: On request

Crank press ZAMECH PKRR 400A built in 1974. Technical data : - pressure: 400 tons - clearance between stands: 1020 mm - ram stroke: 315 mm - number of strokes per minute: 20 - maximum distance of the slider from the table closed: 742.5 mm - slider adjustment: 250 mm - table dimensions: 1020 x 1050 mm - main engine power: 40 kW - main engine revolutions: 1500 1 / min. - weight of the press: 40 t

PLC – controlled (touch screen) multifunctional press with multiple functions Firstly, our multi-function press is a vacuum press, three-dimensional film deformation with or without membrane. Vacuum chamber size 2,340 x 1,340 mm Maximum workpiece height 60 mm Equipped with a vacuum diaphragm at the top and bottom. The press is equipped with a powerful vacuum system and a vacuum tank, which guarantees a constant and uniform supply of vacuum to the working chamber. Drive power vacuum pump 4.5 kW Vacuum tank volume 500 liters Vacuum pump flow rate 100 m³/hour Two pieces of air heat exchanger, each with a heating capacity of 3 kW. Secondly, our multi-function press is a hydraulic plate press with ten pieces of press cylinder and 200 tons pressing force – Suitable for different applications - - Cold and hot pressing - Single-sided and double-sided veneer pressing ...

Crank press HECKERT PKZ 400.1 built in 1980. Technical data : - maximum pressing force: 400 t - working path - lower position of the slider to the maximum pressing force: 21 mm - maximum drawing depth: 125 mm - pressing force using the maximum drawing depth: 160 Mp - idle speed of the slider: 18 min-1 - maximum number of switchings: 9 min-1 - ram stroke (min-max): 315 mm - slider adjustment: 200 mm - holding force of the drawing device at air pressure: 63 Mp, 5 kp / cm2 - force of the drawing device ejector at air pressure: 10 MP, 7 kp / cm2 - total weight: 38.5 t

Operating pressure: 150 bar, Number of foerders: 42 l/min, Drive: electric 15 kW, 400 volts, Engine hours: approx: 1, Trolly, incl. zubehoer,

Operating pressure: 1000 bar, Number of foerders: 17 l/min, Drive: electric 35 kW, 400 volts, 63 A, Engine hours: approx: 2 h, Trolly, incl. pistol, 10 m HD hose, 15° flat jet dues,

DENER SERVOBRAKE 4015 CNC press brake which was built in Turkey in 2016, guarantees the highest quality of workpiece machining with simultaneous low energy consumption and low operating costs. Distinguished by its sturdy construction and state-of-the-art technology, the machine is equipped with a powerful electric drive based on servomotors and belts with a multi-belt system. Replacing the standard hydraulic system with an electric drive makes the SERVOBRAKE DENER DDM 4015 servo press brake much easier to maintain and faster than conventional hydraulic presses. This is possible because the machine is free of hydraulic oil, filters, seals and other hydraulic components. The electric drive also eliminates the occurrence of the so-called deflection arrow and its compensation through even force distribution on the slider. The DENER servo electric press brake is also equipped with an in ...

Operating pressure: 350 bar, Flow rate: 21 l/min, Engine: Vanguard 2-cylinder, 4-stroke gasoline engine Working hours: 2h

a hydraulic single-stand drawing press Müller model CLZ.100.1.34, Y.O.M. 1994, good condition, with UVV, Siemens S7 screen control, throat gap 400 mm, installation height 800 mm, table surface 800 x 730 mm, stroke 600 mm, drawing cushion 40 to., drawing cushion stroke 200 mm.

Rotary tablet press Killian, model T300-32 EU-B Year of construction: 1996 One pair presser rollers respectively for pre-pressure and main pressure. Designed for high press speeds; operated mainly from the front using the hour hand wheels, the controls and via the terminal. Excellent, in full working condition. Technical Information: - Height with hopper: 1852mm (height without hopper: 1692mm) - Machine weight: 1950kg - Max tablet diameter: 16mm - Max fill depth: 16mm - Max output: 240,000 tablets per hour - Max operating pressure 80kN - B type machine – EUR B - 32 stations - Fill System - force feeder Electrical upgrade in 2010 – new PLC and touch screen HMI.

press is after overhaul: full function complete mechanical parts, pneumatic and control system. The press has a new pneumatic clutch, the original was electromagnetic clutch as old system. Press capacity: max. 45 t Pull force: max. 45 t Counter force in pressing position: max. 17 t Stroke of the punch: 175 mm Filling height: max. 140 mm Deduction: max. 85 mm Compression distance: max. 55 mm Top pressing: max. 15 mm Stroke rate: 9 – 26 min.-1 Motor: 7,4 kW Approx: 3000x1200x1800 mm Net weight: about 5000 kg

Pressing rollers Tranklein Model 600 Year 1980 Width 600 mm Available Direct

Used Goodnature cold press, model X-1. Year of production 2014. Capacity up to 1,000 bottles per day. Power supply 220V 50Hz X-1 is a professional press capable of producing a thousand bottles of cold-pressed juice per day. X-1 is used by successful cold-pressed juice producers, nut milk producers and cider producers. The machine is almost unused. She worked several times. The bags have been the same since new - they show minimal wear. It's like brand new. Everything works fine without any problems. Perfect machine for small juice producers, large grocery stores or juice shops. It can also work in the production of nut milk or cider. The machine is very easy to clean and maintain. Comes with 3 different shredding discs and 2 bags. Original user manual. The juice is squeezed gently but firmly. The operator sets the pressure and controls the time. It can work fast with lower effi ...

Filter press plate filter ultrafiltration plate filter used Manufacturer: Rhone Poulenc Type: UFP 70 Max working pressure: 4.5 bar/64 psi Torque: 8 mxkg 6x24 plates approx. 2000 x 600 H 1700 mm Changes and errors in the technical data, Information and prices as well as intermediate sale reserved.

Table top height: 910 mm Table top size: 700 x 380 mm Max drilling depth: 145 mm Max long hole length: 240 mm Height adjustment distance 135 mm Engine power: 1.5 kW Voltage: 400 V / 50 Hz Speed: 3,000 rpm Net weight: approx. 200 kg Suction nozzle: 100 mm Dm Dowel drilling device: Pitch 16, 22, 25, 32 mm with precision grid roller Driving equipment: Yes Frame stop 90°: pluggable Two-jaw chuck: up to 20 mm clamping range Hand eccentric tensioner: 1 piece 1 Lever control: Yes Measuring clock in handwheel: Yes Miter stop: Yes, double angle adjustment stop from 22.5° to 75° infinitely adjustable

Plate press Filter press Chamber filter press Industrial wastewater technology -used- Manufacturer: FAZZINI Type: F500 Operating pressure 15 bar Plate size 500 x 500 mm 20 plates with hydraulic unit 1.5 kW and piston pump 0.75 kW Dimensions: approx. 2400 x 750 x 1600 mm All items are checked for function before delivery, if technically possible !

Block glue press Müro 5000/A2 WT; Working width 705mm; 3x dryer; Stack increase; Heat guide plate; Stand unit. Padding press Müro 5000/A2 WT; working width 705mm; 3x dryer; pile elevation; heating sheet; floor mounted machine.

Festo offers a pressure regulator valve battery with switch-on valve, pressure gauges, silencer, mounting brackets, angled 3/8" push-in fitting outputs and a through-ground, angled 3/8" push-in fitting input. The complete battery is in absolute top condition, it is an unused part of the stock. The following is pre-screwed ready for use: - 528988 Pressure Control Valve Battery LRB-3/8-D-7-0-K4-MIDI - 162809 Switch-on valve HE-3/8-D-MIDI - 4 x 359873 pressure gauge 0-10bar MA-50-10-1/4 - 159593 HFOE-D-MIDI/MAXI mounting bracket - 165004 Silencer UC-1/4 - 4 angled 3/8" push-in fittings on the outputs - Through-ground, angled 3/8" input

Hydraulic pressure filter, 200bar, 34P-0014, Parker, used - overhauled Special price (The cheapest current new price in the market is more mthan € 3000 excl. VAT) If you have a VAT number, we will gladly issue you an invoice without VAT. Used part - overhauled! The part was purchased from a company's spare parts warehouse, has been overhauled, reconditioned and is fully functional. Manufacturer Type designation: 34P-0014 Max. operating pressure 200 bar 565L/min Micron Rating 20Q G1 1/4" incl. new filter element Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the seller, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclude  ...

The press brake HAMMERLE BM 200-3100 press brake was built in 1996. The folding machine was serviced regularly. Technical parameters of the press: - control: INFINITRON - number of NC axes: 11 - pressure: 200 tons - bending length: 3100 mm - working stroke: 400 mm - distance between the body walls: 3240 mm - maximum distance between the table and the bumper: 965 mm - voltage: 3 x 400 Volt - control voltage: 24 V = - total power: 28 kW - deflection arrow compensation - total machine width: 4400 mm - total height of the press: 3400 mm - weight of the press: 16 600 kg

Hydraulic pressure filter, 200bar, 34P-0016, Parker, used - overhauled Special price (The cheapest current new price in the market is more mthan € 3000 excl. VAT) If you have a VAT number, we will gladly issue you an invoice without VAT. Used part - overhauled! The part was purchased from a company's spare parts warehouse, has been overhauled, reconditioned and is fully functional. Manufacturer Type designation: 34P-0016 Max. operating pressure 200 bar 565L/min Micron Rating 20Q G1 1/4" incl. new filter element Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the seller, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclud ...

Completely overhauled HSB 15 incl. certified oil pan and protective fence for a quick and Trouble-free commissioning. Overhauled in 2021 Optional new 8m3 bunker and conveyor screw available. Including. Used machine warranty

Qty. 1 Second-hand crank hot forging press – dismantled & in storage Mfc.: Hyunjin Industry, Korea Built: 2008 Status: dismantled and in storage Force: 2500 T Total weight of the machinery: approx. 250 T

PLASOMAT PMS 63 CP eccentric press was manufactured in Poland in 2004. In order to meet all production requirements, the machine features a large area slider with the possibility of adjusting the height and number of strokes in the control cabinet. In addition, a stable, deformation-resistant monolithic structure combined with a high pressing force of 63 tonnes ensures the highest accuracy and precision in machining. All this makes the PMS 63 CP press the ideal choice for both small batch and high volume production. The offer includes additional equipment, consisting of among others 8 anti-vibration pads and an intermediate table. Technical specifications of the PLASOMAT PMS 63 CP press - maximum press force: 63 t (630 kN) - work table dimensions (L x W): 800 x 560 mm - number of slider strokes: 65-85/min - maximum slider stroke: 110 mm - minimum slider stroke: 8 mm - slider adj ...

Press brake edge machine edge bench press used Manufacturer: Mengele Type: C320-4B Built: 1966 last revision and repair: 2000 Location D-01587 Riesa Dimensions WxH: 6,250 x 3,650 mm Edge knife width: 6,150 mm sheet thickness at 6,000 mm bending length: approx. 7.5 mm. The machines are designed for very deep shaft bends, therefore very deep cheek recesses. Original 300 t pressing force - In 1989 the pressing force was increased to 350 t. The press is in very good condition despite its age. The machine is disassembled and ready for loading. documentation for the machine is available. Weight: about 45 t

250 ton x 3000mm 3100mm ben length 3200mm between frames MASSIVE tooling package Bend aid and voice control!