127,185 used machines on RESALE, but how to find them? Machine Search
This Walter Helitronic Power Grinding machine was manufactured in the year 2004. It is equipped with a WALTER HMC 600 control unit and has 5 axis. The machine has a spindle speed of 7000 rpm.
FINN-POWER LP6 punch laser machine was manufactured in 2008 in Finland by FINN-POWER OY. The machine was used for machining AISI 304 and AISI 316 stainless steel sheet metal. Since its purchase, it has been regularly serviced by the manufacturer and has undergone annual technical inspections. The FINN-POWER LP6 is a high-performance sheet metal machining center that combines punching and laser cutting technologies. It enables comprehensive machining of workpieces with a maximum thickness of 8 mm, eliminating the need for additional operations on other machines. The use of both these technologies in a single system reduces task completion times and increases overall production efficiency. Punching is performed by means of a hydraulic cylinder, whose stroke and speed are fully numerically controlled. The ability to programme the upper stroke limit enables the punch’s movement to be ...
FINN-POWER LP6 punch laser machine was manufactured in 2008 in Finland by FINN-POWER OY. The machine was used for machining AISI 304 and AISI 316 stainless steel sheet metal. Since its purchase, it has been regularly serviced by the manufacturer and has undergone annual technical inspections. The FINN-POWER LP6 is designed for the comprehensive machining of sheet metal with a maximum thickness of 8 mm. It enables both punching and laser cutting in a single work cycle, reducing the need for additional operations on other machines. The combination of both these technologies in a single system speeds up task completion times and increases the efficiency of the production process. The punching process is performed by means of a hydraulic cylinder, whose stroke and speed are fully numerically controlled. The ability to programme the upper stroke limit enables the punch movement to be pr ...
longitudinal feed: X: 490 mm Vertical feed: Y: 320 mm cross travel: Z: 660 mm Swivel range: C: +/- 200 ° Control: HMC 500 WWM Walter lenght tool piece capture: A: 175 mm ISO 50 Max. rpm: A: 60 min/-1 centre height: 145 (190) mm max. workpiecediameter: 320 mm max. workpiece length: 320 (350) mm resolution: 0,0001 ° Resolution: 0,0001 mm Grinding spindle:: spindle diameter: 80 mm grinding wheel diameter: max. 200 mm Max. rpm: 0 - 7.000 min/-1 driving power - grinding spindle: 24 kW max. Torque: 6 Nm total power requirement: 35 kVA weight of the machine ca.: 4,65 t dimensions of the machine ca.: 3,6 x 2,5 x 2,95 m Documents: pallet loading station: CNC - Tool-Grinding-Machine WALTER - Helitronic Power Production The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 60.0 t chamfer lenght: 1270 mm distance between columns: 1000 mm column arm: 410 mm ram stroke speed: 160 mm/sec work speed: 10.0 mm/sec return speed: 165 mm/sec work stroke: 275 mm dayligth: 530 mm table height: 900 mm table width: 90.0 mm back stop - adjustable: max. 800 mm oil volume: 150 ltr. voltage: 400 V engine output: 7.5 kW Weight: 4320 kg range L-W-H: 2250 x 1960 x 2750 mm Demonstration/demo machine () From our showroom (like new) With very few operating hours -------------------------------------------------- CNC press brake with special equipment Version ERGO - knee room for the operator flexible articulated arm mount for the controller increased installation height increased cylinder stroke as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA-66T graphic/touch screen 2D graphi ...
pressure: 175 t chamfer lenght: 4100 mm distance between columns: 3600 mm column arm: 410 mm ram stroke speed: 180 mm/sec return speed: 135 mm/sec work speed: 10,0 mm/sec work stroke: 275 mm dayligth: 550 mm table height: 900 mm table width: 90,0 mm oil volume: 200 ltr. voltage: 400 Volt total power requirement: 15,0 kW weight: 11.950 kg range L-W-H: 5100 x 2150 x 2850 mm -------------------------------------------------- Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA-58T graphics / touchscreen 2D graphic programming 15 high definition color TFT screen Bending sequence calculation Product programming and display in real size USB interface - Motorized backgauge with R-axis, on recirculating ball spindles - ...
pressure: 100 t chamfer lenght: 2600 mm distance between columns: 2200 mm column arm: 410 mm ram stroke speed: 200 mm/sec work speed: 9.5 mm/sec return speed: 155 mm/sec work stroke: 275 mm dayligth: 530 mm table height: 900 mm table width: 90.0 mm oil volume: 150 ltr. voltage: 400 Volt total power requirement: 7.5 kW weight: 6850 kg range L-W-H: 3750 x 1950 x 2800 mm -------------------------------------------------- Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA 53T (touchscreen) - Motorized backgauge with R-axis, on recirculating ball spindles - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Upper deer foot tool with PS 135.8 ...
pressure: 175 t chamfer lenght: 3100 mm distance between columns: 2600 mm column arm: 410 mm ram stroke speed: 180 mm/sec work speed: 10.0 mm/sec return speed: 135 mm/sec work stroke: 275 mm dayligth: 550 mm table height: 900 mm table width: 90.0 mm oil volume: 200 ltr. voltage: 400 Volt total power requirement: 15.0 kW weight: 9450 kg range L-W-H: 4250 x 2150 x 2800 mm -------------------------------------------------- Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA-58T graphic/touch screen 2D graphical programming 15 TFT color screen with high resolution Bending sequence calculation Product programming and real size display USB interface - Motorized backgauge with R-axis, on ball screws - X = 800 mm R = ...
pressure: 60.0 t chamfer lenght: 2100 mm distance between columns: 1700 mm column arm: 410 mm ram stroke speed: 160 mm/sec work speed: 10.0 mm/sec return speed: 165 mm/sec work stroke: 275 mm dayligth: 530 mm table height: 900 mm table width: 90.0 mm oil volume: 150 ltr. voltage: 400 Volt total power requirement: 7.5 kW weight: 5640 kg range L-W-H: 3250 x 1960 x 2750 mm -------------------------------------------------- Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA 53T (touchscreen) - Motorized backgauge with R-axis, on recirculating ball spindles - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Upper deer foot tool with PS 135 ...
pressure: 220 t chamfer lenght: 4100 mm distance between columns: 3600 mm column arm: 410 mm ram stroke speed: 180 mm/sec work speed: 10.0 mm/sec return speed: 160 mm/sec work stroke: 275 mm dayligth: 550 mm table height: 900 mm table width: 160 mm oil volume: 300 ltr. voltage: 400 Volt total power requirement: 18.5 kW weight: 13800 kg range L-W-H: 5150 x 2250 x 3000 mm -------------------------------------------------- Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA-58T graphics / touchscreen 2D graphic programming 15 high definition color TFT screen Bending sequence calculation Product programming and display in real size USB interface - Motorized backgauge with R-axis, on recirculating ball spindles - X ...
The power encoder cable for Tetra Pak systems plays a vital role in the operation and monitoring of various equipment within the Tetra Pak machinery, particularly in processes like filling and packing. Here are some key features and details regarding power encoder cables used in Tetra Pak systems:, Key Features of Power Encoder Cables:, - Function: The power encoder cable connects the encoder to the control system, allowing for the transmission of signals that monitor the position and speed of moving parts in the machinery., - Signal Transmission: These cables are designed to carry data signals related to rotational positioning, helping ensure that machines operate accurately and efficiently., - Durability: Power encoder cables are built to endure the rigorous conditions within Tetra Pak machinery, including exposure to moisture, variable temperatures, and physical wear. They are often m ...
Siemens SITOP UPS1600 Power Supply Item number: 6EP4137-3AB00-2AY0 Type: SITOP UPS1600 Input: DC 24V/43.4A Output: DC 24V/40A Battery connection: DC 24 V / 3 A Weight: approx. 2.5 kg Condition: used Price without VAT per piece Country of origin: Austria Piece1
Key data: 4 Meter, 13 t
Machine Type: Plasma Inverter Cutting Machine Make Hypertherm Type Powermax 30 AIR Serial No. 033.100 Connection voltage 1 x 230 Volt Adjustment range 15 – 30 amps Duty cycle 20% ED at 30 amps Current adjustment infinitely variable max. cut-off cut for a short time 15 mm at 125 mm/min max. quality cut for a short time 7 mm at 500 mm/min Cooling inverter through built-in fan Cooling burner compressed air cooled Portable assembly system design Fuse 16 Ampere Optional accessories integrated compressor Dimensions L x W x H 420 x 195 x 330 mm Weight with burner 13 kg Age 4 years Condition workshop tested, very good incl. UVV test report Scope of delivery Plasma cutting system with the following accessories: 1 piece AIR T30 hand cutting torch 4.5 mtr. long 1 piece ground cable 1 Piece Instruction Manual Warranty: 18 months from th ...
Key data: 4 Meter, 13 t
Machine Type: Plasma Inverter Cutting Machine Make Hypertherm Type Powermax 30 AIR Serial No. 039.660 Connection voltage 1 x 230 Volt Adjustment range 15 – 30 amps Duty cycle 20% ED at 30 amps Current adjustment infinitely variable max. cut-off cut for a short time 15 mm at 125 mm/min max. quality cut for a short time 7 mm at 500 mm/min Cooling inverter through built-in fan Cooling burner compressed air cooled Portable assembly system design Fuse 16 Ampere Optional accessories integrated compressor Dimensions L x W x H 420 x 195 x 330 mm Weight with burner 13 kg Age 3 years Condition workshop tested, very good incl. UVV test report Scope of delivery Plasma cutting system with the following accessories: 1 piece AIR T30 hand cutting torch 4.5 mtr. long 1 piece ground cable 1 Piece Instruction Manual Warranty 24 months from th ...
Punching force: 300kN, max. operating pressure: 300bar, weight: 13500kg, operating hours: approx. 52300h. Documentation available. An on-site inspection is possible.
A bevel gear rolling test machine Gleason is available. Workpiece diameter: 330mm, max. center distance: 203mm, driver spindle nose distance range: 100mm-250mm, max. offset range upper/lower: 203mm/50mm, driver spindle bore: 99mm, driver spindle taper per meter: 15.5mm/m, counter spindle bore: 58mm, counter spindle taper per meter: 12.7mm/m, spindle speed: 1500rpm, test angle range: 0°-180°, driver spindle repeatability: +/-0.004mm, runout: +/-0.003mm, machine dimensions X/Y: approx. 1550mm/2050mm, weight: approx. 2400kg. An on-site inspection is possible.
CNC Floor Milling Machine for Bed CNC control Heidenhain iTNC 530 Controlled NC table 1600 x 1600 mm Table dimensions 5500 x 2600 mm Travel X-axis 8000 mm Y-axis travel 2100 mm Travel Z-axis 1300 mm Travel W-axis 1000 mm C-axis swivel of the milling head body by 360° A-axis swivel of the milling head by 180° Spindle speed 36 - 6,000 rpm Spindle motor 42 / 30 kW Spindle holder DIN 69871-SK 50 Tools in Tool Magazine 48 If you have any questions about the machine, please do not hesitate to contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.
CNC Prima Power Laser Cutting & Welding Machine TYPE: Optimo 2545 Basic: X= 4,500mm, Y= 2,500mm, Z= 1,020mm Length of the shaker (per PC): 4000 mm Width 2250mm/ Duty width: 3000mm Height: < 400 mm Process path (with coupled movement): 10,000 mm Loading capacity: 600 kg/m2 Max Speed: 0.5m/s Max acceleration: 0.5m/s2 Max kickback:
PowerPak 560 packaging machine for soft and hard film, fully equipped (cross-cutting, cross-cutter, longitudinal crushing knife, perforating device, and standard longitudinal cutting) features two movable labelers (top and bottom web) 510 mm wide x 590 mm long for pre-feeding 30 A 20 kW Triolabel printing device, Machine designation: GEA Powerpack 560, Construction year: 2017, Mains connection: 3/N/PE 400V 50/60 Hz, Circuit diagram number: ELTL170300
KIMLA POWERCUT LF1020 fiber laser was built in 2022 in Poland by POLCOM Przemysław Kimla. The machine has worked for a total of 814 hours and is in very good condition. Laser cutting is performed by means of a stable 2 kW fibre beam, which is generated by a resonator of the highest energy efficiency. A focusing lens system inside the cutting head ensures optimum beam geometry for various types of workpieces. As a result, the edges of the machined workpieces are distinguished by their unprecedented smoothness and absence of irregularities. The entire machining process is fully automatic, thanks to the use of an automatic pallet exchange system. This system enables simultaneous loading and unloading of workpieces during cutting, thus increasing production efficiency and reducing machine downtime to a minimum. The POWERCUT LF1020 fibre laser is offered with an extensive range of equi ...
General SKU409X1294 LocationBarneveld CEcheck Specified Features - Miscellaneous CapacityMax. Irradiation intensity up to 3.000 mW/cm2 Motor115-230 volt CapacityWavelength: 365,385,395,405 and 460 nm Information MakeHonle TypeLed cube 100 IC Floor space1,0x0,40 m Total height0,50 m Weight22 Extra Specifications3x led cube 100 IC with led spot hp, UV chamber size 195x186x195 mm, : Temp range +5°C till +35°C, 1x led powerdrive IC 1200 watt MiscellaneousDr. HönleMiscellaneous > MiscellaneousBrand > Dr. Hönle What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU409X1295 LocationBarneveld CEcheck Specified Features - Miscellaneous CapacityMax. Irradiation intensity up to 3.000 mW/cm2 Motor115-230 volt CapacityWavelength: 365,385,395,405 and 460 nm Information MakeHonle TypeLed cube 100 IC Floor space1,0x0,40 m Total height0,50 m Weight22 kg Extra Specifications3x led cube 100 IC with led spot hp, UV chamber size 195x186x195 mm, : Temp range +5°C till +35°C, 1x led powerdrive IC 1200 watt MiscellaneousDr. HönleMiscellaneous > MiscellaneousBrand > Dr. Hönle What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU409X1296 LocationBarneveld CEcheck Specified Features - Miscellaneous CapacityMax. Irradiation intensity up to 3.000 mW/cm2 Motor100-240 volt CapacityWavelength: 365,385,395,405 and 460 nm Information MakeHonle TypeLed cube 100 Floor space1,00x0,40 m Total height0,45 m Weight25 kg Extra SpecificationsWith 3x UV chambers, type led cube 100 with led spot, chamber size 195x186x195 mm, : 1x powerdrive, type 120 MiscellaneousDr. HönleMiscellaneous > MiscellaneousBrand > Dr. Hönle What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
Engine Brand: IHC/CASE, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Flywheel Housing SAE: SAE 3 , Flywheel SAE: Unknown , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/ihc-case-p110-power-unit-u sed/613, , = More information =, , Type: Engine, Year of construction: 1010, Type number: DJA-P110; Transport weight [kg]: 710
Pressure:175 t chamfer lenght:4100 mm distance between columns:3600 mm column arm:410 mm ram stroke speed:180 mm/sec return speed:135 mm/sec working speed:10 mm/sec work stroke:275 mm oil volume:200 l dayligth:550 mm table height:900 mm table width:90 mm total power requirement:15 kW weight of the machine ca.:12000 kg dimensions of the machine ca.:5100 x 2150 x 2850 mm
We sell 9 new gas engines, zero engine hours. Power as follows described Sale due to going out of business. 2 engines 38 kW - WJPower HMG 320 - SAE 3 2 engines 56 kW – WJPower HMG 434 - SAE 3 3 engines 85 kW – WJPower HMG 634 - SAE 2 2 engines 100 kW – WJPower HMG 645 - SAE 2
Basket dimensions X/Y/Z: 670mm/480mm/300mm, max. batch weight: 200kg, average batch weight: 150kg, cycle time: approx. 5-10min/batch, heating time: 3h-4h, working chamber: 2, water quality: approx. 10°dH, exhaust air volume: approx. 240m³-480m³/h, loading height: 920mm, water/air temperature: 70°C/130°C, cleaning agent pH range: 7-9. Machine dimensions X/Y/Z: approx. 5400mm/2500mm/3100mm, weight: approx. 5000kg. Documentation available. A visit on site is possible.
Number of spindles: 5 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 5-30 m/min. Control: Memory-Funktion Weinig Powermat 600 Compact ---------------------------------------------------------------------- The machine has been cleaned and fully inspected. Brief Summary: ---------------------------------- - 5 Spindles - Powerful Motors - Left and top spindles controlled for width and height Detailed Description: ---------------------------------------------------------------------- - Technical Data: Working Width: 20-230 mm Working Height: 10-120 mm Number of Spindles: 5 1st Spindle - Bottom ----------------------------------------------- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool Circle: 125-145 mm Tool Circle for Rebating Cutter: 130-160 mm Axially Travel: 5 mm Rebating Device MarathonCoatine ...
Inv. Num. : 8877 Type: POW229-2 Producer: NOTUS POWERSONIC Created: 2011 Parameters: Control system: IMATIC S7 1200 Power consumption: 9.2 kW Equipment: Safety Relays Light cabinet
This 6-axis EMCO Hyperturn 65 Powermill G2 was manufactured in 2022. A highly productive CNC turn-mill center, it features a main spindle and subspindle both with a max torque of 250 Nm and speeds up to 5000 rpm. The milling spindle offers up to 12000 rpm. Includes a 40-position tool magazine, 12-position turret, and advanced Sinumerik ONE control system. If you are looking to get high-quality turning and milling capabilities consider the EMCO Hyperturn 65 Powermill G2 machine we have for sale. Contact us for more information.
This 3-axis Prima Power Platino 1530 was manufactured in 2017. It features a 3 kW CO₂ laser, a working area of 3000 × 1500 mm, and can handle mild steel up to 15 mm, stainless steel up to 8 mm, and aluminum up to 6 mm. It includes an automatic pallet changer and a CNC Touch Interface. If you are looking to get high-quality laser cutting capabilities, consider the Prima Power Platino 1530 machine we have for sale. Contact us for more information.
This Prima Power Platino Fiber laser cutting machine was manufactured in the year 2014 in Italy and has 26437 production hours, of which 11414 are laser hours. The machine has a laser power of 3 kW.
This Finn-Power TRS 6 SUV was manufactured in 2003. A robust CNC punching and shearing machine, it features a punching force of 300kN and shearing force of 250kN. It includes a turret with 20 tool positions and optional a sheet metal storage capable of handling 40 pallets. Ideal for high-quality punching capabilities. Contact us for more information.
This 5-axis Prima Power Rapido was manufactured in 2012, featuring a cutting area of 4080 mm (X) × 1530 mm (Y) × 765 mm (Z) and a laser power of 3000 W. It handles 3D sheet metal parts efficiently with speeds up to 60 m/min. Ideal for automotive and aerospace applications. If you are looking to get high-quality cutting capabilities consider the Prima Power Rapido machine we have for sale. Contact us for more information.
This Finn-Power F6-25 5B was manufactured in 1997. A robust CNC punching machine with a machine weight of 14500 kg and a punching force of 300 kN. It operates at a maximum working pressure of 300 BAR. If you are looking to get high quality punching capabilities consider the Finn-Power F6-25 5B machine we have for sale. Contact us for more information.
Kohler Power Wave 5000TP UPS System 2014, capacity of UPS - 25 kVa, inclusions 46 batteries, serviced from new by Uninterruptable Power Supplies (a Kohler company)
This Prima Power PLATINO FIBER was manufactured in 2015. A robust laser cutting machine featuring a 3000x1500mm cutting area and a powerful 2kw FIBER technology. It includes 2 exchangeable tables and boasts a high reposition speed of 140m/min. With 29,000 machine hours and 25,600 cutting hours, the Prima Power PLATINO FIBER machine we have for sale is regularly maintained. Contact us for more information.
ABB Power Wave 33 UPS System 2014, capacity of UPS - 400 kVa, inclusions 100 batteries, serviced from new by Uninterruptable Power Supplies (a Kohler company), Two systems in stock
This Finn-Power LP6 was manufactured in 2007. A robust punching machine featuring a hydraulic punch with a 30-ton capacity and a turret hosting 20 stations, including two Multi-Tool stations. It has a large working area of 3000x1500mm, ideal for extensive production needs. Consider the Finn-Power LP6 machine we have for sale. Contact us for further details regarding this punching machine.
The machine is in good technical condition, testing possible after prior agreement. Force (kN) 250 Bending length (mm) 1200 Distance between verticals (mm) 1250 Stroke (mm) 200 Entry without tools (mm) 440 Throat (mm) 120 Consumption (kVA) 9.4 Approach speed (mm/s) 120 Working speed (mm/s) 10 Return speed (mm/s) 150 Stroke - X axis of the back gauge (mm) 625 Speed - X axis of the back gauge (mm/s) 600 Stroke - R axis of the back gauge (mm) 200 Speed - R axis of the back gauge (mm/s) 200 Standard dimensions (L x W x H) (mm) 2200 x 1600 x 2320 Weight (kg) 3450
This Finn-Power LP 8 turret punch press was manufactured in 2008. It features a maximum punching force of 30 tons and a punching working area of 1500 × 3000 mm. The machine includes a threading/tapping unit capable of mounting 6 taps up to M8 and a versatile tool turret. Consider the opportunity to buy this Finn-Power LP 8 turret punch press. Contact us for further details.
Machine type: Cleaning system aqueous Make: LPW Type: PowerJet 670T4 Year of Make: 2010 due to a move and the lack of use, the cleaning system is sold very cheaply. Original price approx. 450.000,00€ The system has two working chambers and is suitable for demanding cleaning tasks, including the application of corrosion protection on an aqueous basis. The machine ran for the last time in 2023 and requires major maintenance before recommissioning.
Chassis, support wheel, tandem cargo wheel, load rollers, steering roller, support roller, fixed roller, swivel wheel, support wheel bracket -Manufacturer: Powerthane / Jungheinrich, support wheel from electric pallet truck ECE 20 -Wheel size: 180 x 65 mm -Quantity: 1x support roller available -Dimensions: 240/160/H280 mm -Weight: 13 kg
Running gear, support wheel, load wheel tandem, load rollers, steering roller, support roller, fixed roller, swivel wheel -Manufacturer: Powerthane / Jungheinrich, jockey wheel from electric pallet truck ECE 20 -Wheel size: 180 x 65 mm -Number: 1x support roller available -Price per piece -Dimensions: 235/160/H240 mm -Weight: 13,1 kg/pc.
CNC control, control panel, computer monitor, screen, TFT industrial monitor -Manufacturer: B&R, control panel, operating terminal, control panel -Type: PowerPanel 500 5PP5:210261.001-01 -Individual components: see photos -Number: 2 terminals available -Price per piece -Total dimensions: 740/730/H210 mm -Weight: 26 kg/pc.
Plasma cutting machine, plasma cutter for plasma cutting system, plasma/oxygen cutting system, servo motor, gear motor -Manufacturer: CR Electronic SRL / Power Automation, servo drive for plasma/oxygen cutting system -Cutting system: Type OXY 5.1 - 25 -Servo motor: Power Automation type PAT3-0190-60-560-B-S4-SRM50 -Individual components: see photos -Number: 2x drive unit available -Price: per unit -Dimensions: 475/240/H140 mm -Weight: 12.4 kg/pc.
Manufacturer: Homag , Type: Power FR 20/09/15/L/Q1, Year: 2007, Control: Powercontrol Homag, Conveyor: Nockenkette, Work piece width min-max mm: 350, Min.-max. workpiece length in mm: 220-1500, Min.-max. workpiece height in mm: 10-30, Machine with controlled dogs: yes, Cam distance mm: ca.500, Feeding speed min-max m/min: ca.60, Feed stepless: yes, verängerte Kette mm: yes, Overall milling units: 5, Moulding units swivel-mounted: 5, gesteuerte Fräsaggregate: keine, 1st milling unit kW / rpm: 6,6/5850, 1. swivelling controllable: yes, 2nd milling unit kW / rpm: 6,6/5850, 2. swivelling controllable: yes, 3rd milling unit kW / rpm: 6,6/5850, 3. swivelling controllable: yes, 4th milling unit kW / rpm: 6,6/5850, 4. swivelling controllable: yes, 5th milling unit kW / rpm: 6,6/5850, 5. swivelling controllable: yes, Year :2007
maximum number of results exceeded
please refine your search
