power boiler used for sale

Repair and Exchange service Repair and replacement service SERVICE MAZAK MITSUBISHI NETZTEIL POWER SUPPLY MDS-C1-CVE-300 – Repair price depending on the effort. Max. 1400 – € Through our Mazak machine simulators, we are able to test almost ALL Mazak Mitsubishi power supplies under load. Long-term tests are also possible. We repair your Mazak Mitsubishi power supply at a flat rate or at cost. The amount of work is about 1-3 days. Urgent repairs are also possible. The warranty on the repair is 6 months. Repairing other power supplies on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Repair and Exchange service Repair and replacement service SERVICE MAZAK MITSUBISHI NETZTEIL POWER SUPPLY MDS-C1-CVE-370 – Repair price depending on the effort. Max. 1400 – € Through our Mazak machine simulators, we are able to test almost ALL Mazak Mitsubishi power supplies under load. Long-term tests are also possible. We repair your Mazak Mitsubishi power supply at a flat rate or at cost. The amount of work is about 1-3 days. Urgent repairs are also possible. The warranty on the repair is 6 months. Repairing other power supplies on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

complete 230kW

We offer for sale two pieces MWM TBG 616 V8 K.. Technical data engine: Engine manufacturer: MWM Engine type: TBG 616 V8 K Rated power: 300 kW Speed: 1500 rpm Fuel: Natural gas Technical data generator: Generator manufacturer: Stamford Generator power: 600 KVA Voltage: 400 / 231 Volt Power factor: cos. - phi 0.8 Speed: 1500 rpm Year of construction: 2004 Operating hours: 57,000 h Location: Cologne

We offer a Liebherr G944 for sale.

We offer for sale a piece mwM TBG 616 V 8 K. Technical data engine: Engine manufacturer: MWM Engine type: TBG 616 V 8 K Rated power: 350 kW Speed: 1500 rpm Fuel: Natural gas Technical data generator: Generator manufacturer: Stamford Generator power: 550 KVA Voltage: 400 / 231 Volt Power factor: cos. - phi 0.8 Speed: 1500 rpm Year of construction: 1996 Location: Cologne

Key data: 61 , 75

Origin Engine 9.1 L: 90 kW mechanical power gas supply: natural, LNG, biogas or wood gas liquid-cooled exhaust manifolds single coil per cylinder ignition system crankcase venting motor coupled to generator Generator Linz: active power - 75 kVA turnovers - 1500 1/min

Power supply -Type: RPS -Weight: 13 kg

Power supply, converter, converter, power supply unit -Type: PE 1980/20 U -Input: 220 VAC -Output: 5 VDC 200A -Dimensions: 200/320/H130 mm -Weight: 8.5 kg

Power supply, power supply -Input: 380 V 0.85 A -Output: 24 V 20 A -Dimensions: 280/105/H190 mm -Weight: 10 kg

Wedge rod feed, swivel feed, swivel swivel feed, power clamp feed -Feed size: Ø 250 mm -Weight: 35.5 kg

Power supply, converter, converter, power supply unit -Type: XT40.241 -Input: 3AC 400 V -Output: DC24V/40A -Dimensions: 250/170/H140 mm -Weight: 1.6 kg

Power supply unit, DIN rail -Type: TCL024-112 -Weight: 0.3 kg

Power supply unit, DIN rail -Type: TSP 360-124 -Weight: 1.4 kg

Power supply unit, DIN rail -Type: TSP 180-148 -Weight: 0.7 kg

Power supply unit, DIN rail -Type: TSP 180-124 -Weight: 0.7 kg

Used laser cutter with Rofin DC25 resonator 2500watt laser power 5 and 7.5 inch lens Automatic loading The machine is in constant use

1LA7113-6AA36-Z

Bosch 038035 power supply Power supply for Bosch drive amplifiers / transistor amplifiers of the SERIES TR10-2, TR15-2, TR20-2, TR25-2 Price: 1750 € Functional guarantee upon handover

CHP MAN E2866DE Year of construction 1988 Gas engine 106KW with Piller Generator 120KW Electrical power in used condition for sale. Without guarantee or warranty to traders. Not tested.

Hob: External gears workpiece diameter (tip diameter), max.: 100 mm Minimum circle of shell end mill arbor: 22 mm Maximum tooth length 180 mm Maximum length 140 mm Trolley race: Radial stroke (X axis): 90 mm Tangential stroke (Y axis): 80 mm Axial stroke (Z axis): 400 mm Races of auxiliary trolleys: Loading portal (X5 axis): 2268 mm Sliding headstock (Z4 axis): 360 mm Maximum swivel angle of the milling head: Direction -A: 45 degrees Direction +A: 118 degrees Work table: External diameter: 120 mm Bore: 40 mm Machine size(LxWxH): 5195 mm x 3142mm x 2928 mm Feed rates: X axes, and Z: 1 to fast forward mm/min Rapid traverse: X axis: 7500 mm/min Y axis: 5000 mm/min Z axis: 15000 mm/min Rotational speeds: Tool: 50 to 12000 rpm Workpiece spindle: 0 to 3000 rpmControl: SINUMERIK 840D sl Machine Weight: 8000 Kg

High Power oil-free compressor for workshops, offices, medical institutions and other places where regular compressors of the same size are too loud. Advantages of Aflatek SilentPro300-6: -Six 1100W direct drive electrical motors. -Very large 300l air tank. -Anti-rust coating. -Air filter on each pump. -Low noise and vibrations level. -Oil-free. -Movable on 4 rubber wheels. Technical data: Power supply , V: 3Ph 400V 50Hz Motor power, W: 6x1100(6600) Motor speed, Rpm: 1440 Air supply, L/min: 1260 Maximum pressure. Bar: 8 Maximum pressure, Psi: 116 Noise Level, dB: 85 Air tank, L: 300 Dimensions(length x width x height), mm: 1650x450x850 Weight, kg: 173 Shipping details: Packaging: Plywood box on a pallet Dimensions, (length x width x height), mm: 1720x490x920 Weight, kg: 205 Tracking: Available -Price is with VAT 21% included. Contact us if you  ...

Technical information: Power supply , V: 3Ph 400V 50Hz Motor power, kW: 22 Air delivery at 8bar, L/min: 3600 Air delivery at 10bar, L/min: 3200 Drive type / Starting System Direct-Driven / Y Lube oil (L) 18 Outlet Diameter, inch: DN25 Noise level, dB: 68+2 Dimensions, (length x width x height), mm: 1380x850x1160 Gross Weight , kg: 390 -Price is with VAT 21% included. Contact us if you need a VAT free offer. -For shipping costs contact us directly.

+ + PRE-ORDER + + Due to the current high demand, this model is currently sold out. It is already reordered. The estimated production time is 8-12 weeks. You can pre-order the PTO generator of your choice from us. - - - - - PTO generator 80 kVA Year of construction 2021 - NEW Description: - PTO generator - 80 / 88kVA - 230 / 400 volts - 50 Hertz - Required PTO speed: 400 rpm Digital Control / Meter: - Volt - Display (V) - Amps - Display (A) - Hertz - Display (Hz) - Power in kVA - Operating hours - Counter Sockets: - 2x 230 volts - 1x 380 Volt (125 A) Other equipment: - Residual current circuit breakers (from Schneider Electric, Germany) - Circuit breakers (from Schneider Electric, Germany) --> Other PTO generators with 18 kVA to 65 kVA are available. Price: - 5.750,- € + 19% VAT = 6.842,50 € Dispatch: - A Germany-wide transport includin ...

+ + + PRE-ORDER + + + Due to the high demand, all PTO generators are currently sold out. All models are reordered and are in production. Unfortunately, an exact completion date is not yet known, as there are supply bottlenecks for important components that are required for production. Longer delivery times may be expected. A pre-order can be placed. - - - - - PTO Generator / PTO Generator --> This PTO unit is available in the power classes 18 - 65 kVA. List with prices can be found below in the text. Description: - PTO generator - 18 kVA / 22 kVA / 27 kVA / 38 kVA / 65 kVA - 230 / 400 volts - 50 Hertz - Required PTO speed: 428 rpm Digital Control / Meter: - Volt - Display (V) - Amps - Display (A) - Hertz - Display (Hz) - Power in kVA - Operating hours - Counter Sockets: - 2x 230 volts - 1x 380 Volt Other equipment: - Residual current circuit breakers ( ...

Advantages of Aflatek Air50V: -50l air tank, longer operation. -Powerful 2.2kW direct drive motor. -Mounted on 2 rubber wheels, portable. -Easy to use. -Requires little maintenance. Technical data: Power supply , V: 230 Motor Speed, rpm: 2850 Motor power, kW: 2.2 Motor power, HP: 3 Air delivery, L/min: 360 Maximum pressure. Bar: 8 Maximum pressure, Psi: 116 Air tank capacity, L: 50 Dimensions, (length x width x height), mm: 860x450x710 Weight, kg: 40 Shipping details: Packaging: Carton box Dimensions, (length x width x height), mm: 880x460x730 Weight, kg: 42 Tracking: Available -Price is with VAT 21% included. Contact us if you need a VAT free offer. -For shipping costs contact us directly.

Technical information: Power supply , V: 400V /50hZ Motor power, kW: 45 Air delivery at 8bar, L/min at 8bar: 7000 Air delivery at 10bar, L/min at 10bar: 6200 Drive type / Starting System Direct-Driven / Y Lube oil (L) 30 Outlet Diameter, inch: DN40 Noise level, dB: 72+2 Dimensions, (length x width x height), mm: 1500x1000x1330 Gross Weight , kg: 850 -Price is with VAT 0%. -For shipping costs contact us directly.

RÖHM KFD-1000/3 3/32 Power chuck - unused/brand new Year of construction: 2019 Power chuck RÖHM KFD-1000/3 3/32 ZA520 M30 OD KH42 BH15,2 Item No.: 84662091 Country of origin: Germany H-solid chip cylinder OVS-200 SV 4,500 RPM STROKE 50 Item No.: 84662091 EAN-No.: 4019208232577 Country of origin: Germany Stroke control KP F90 OVS-200 Item No.: 84662091 EAN-No.: 4019208235059 Country of origin: Germany All other accessories shown in the photo are not included in the scope of delivery, therefore not part of this sale. The scope of delivery only includes the accessories that are expressly listed here, in the order confirmation and invoice. Instruction manual – illustration, content and information without guarantee, therefore not binding – see "PDF. At that time NEW PRICE net 20.400 € SPECIAL PRICE BRAND NEW NET 14.900 € Free loading truck - FCA D-8840 ...

Generators Fabr. KNURZ Type (D + E) 5BSAFMachine -No: 5698 Year 08/1990Engine power: 6.2 kWEngine Type: gasoline engineNumber of cylinders: 1Working method: two-stroke / OttoFuel: mixture / 2-stroke 25Speed: 3000 rpm.Generator power: 4.0 kWVoltage: 400V / 3 / 230VWeight approx: 114 kgExternal dimensions approx: 800 x 500 x 600 mmWith- 3 junction boxes 220 V- 1 connection box 380 Vused, very little usedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Pressure pliers make ECKOLD type MZD 25/3Masch. -No: 740701with mobile hydraulic unit type HA 550Pressure force 30 kNOperating pressure 500 barMax. Sheet thickness St. 3.0 mmMax. Sheet thickness AL 3.0 mmDesigned for DF variant S-DFHydraulic hose length 6 mWeight approx. 4.5 kgPower of the unit 500 barOutside dimensions approx. 600 x 500 x 700 mmWith- mobile- Pressure pliers type MZD 35little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Pressure Pliers / Clinching Pliers make ECKOLD type MZD 60/6 DYear of construction 2009Max. Pressure force: 60 kNhorizontal projection: 60 mmvertical projection: 40 mmOpening travel: 45 mmStroke in the working area: 6.0 mmPliers width in the working area: 48/60 mmWeight approx: 34 kgWith- Tool carrier type I- 3.0 m hydraulic hose- rotatable suspensionused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

We offer three Jenbacher J 616 GS E 02 for sale. Specifications: Engine: Jenbacher Type: J 616 GS E02 Power: 2495 KW Year of construction: 2007 Generator: AVK Type: DIG 140 k/ 4W Power: 3013 KVA Voltage: 10 KV Frequency: 50 Hz Year of construction: 2007 Scope of delivery: complete system, except transformer and table cooler

Manufacturer: DSI Type: 77-159A Manufacturing year: 2006 Overall dimensions: 400 x 600 x 500 mm Flow rate: 3 l/min Voltage: 400 V

Manufacturer: Emac - Hydraulics Type: 50565 Manufacturing year: 1986 Overall dimensions: 900 x 600 x 1200 mm Working pressure: 150 bar Electric power: 15 kW

Manufacturer: Bachofen Hydraulik Type: HA26SL-L9,5/230+11,5/5-0LK-DS2-DFE2-M1-NU21-TW2-VB6 ($131756) Overall dimensions: 800 x 700 x 500 mm Operating pressure: 250 bar Oil capacity: 26 L

New, originally packaged European tool. First choice. Very high quality. No return To visit all of them with us. Article Number Quantity Watts C VBLI 12 56 12 W C VLIX 36 26 3.6 w C VTA 300 4 300 W C VT 50 REAM 2 500 W C VML 205 E 6 200 W C VML 75 6 75 W B TP710 FGD 90 710 W B AT 36 LI 120 3.6 V B TALI 12 120 12 V Total 430 pcs.

Different types and lengths, longest length approximately 3.6 meters.

380V.

SPECIFICATIONS: Sweeping width mm: 600 Complete with: 01 Longitudinal brush 01 Side brush 01 Battery charger As good as new

Execution: Aggregate type: stationary Design: Soundproofed Technical data engine: Engine manufacturer: Deutz Engine type: F 4 M 2011 Motor power: 27 KW Cooling: Oil-cooled Start: Electric 12 V DC Speed: 1500 rpm Fuel: Heating oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator Type: Synchronous Generator power: 30 kVA Voltage: 400 / 231 Volt Power factor: cos. - phi 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Remote start Switch: Generator switch 4 pole Delivery: Assembled Tank: Version: Base frame tank with drip tray Content / Litre: 50 Dimensions of the unit: Width approx. mm: 960 Height approx. mm: 1,236 Length approx. mm: 2,000 Weight approx. KG: 1.075 Use: Bearing number: 1229 Condition: Demonstrati ...

Hydroelectric power station - Power: 1000 KvA composed of: 1 turbine Francis/ useful slope 31.7m, water volume 3'500 l/s, manufacturer; Hugal 1 piece generator power 1'000 KvA 1 piece ball slider

System includes (1) Two-Cylinder Motor HERFORD 2H 280, power: 150PS, rotational speed: 400/min, electric/ heating power: 83/ 140kWh, with Generator MARELLI MJB 250 LE4 (2) Three-Cylinder Motor HERFORD 3H 280, power: 225PS, rotational speed: 400/min, electric/ heating power: 125/ 212kWh, with Generator MARELLI MJB 250 MA4.

Combined heat and power unit has been converted for continuous operation. Output: 225kW at 1500 rpm. Fuels: diesel/fuel oil.

Electrical output: 5.5kW, thermal output: 14.8kW, power consumption: 20.5kW. Max. Flow temperature: 95°C, max. return temperature: 70°C, operating pressure: 5bar. Dimensions X/Y/Z without controller: approx. 1000mm/720mm/1070mm, weight: 530kg, operating hours: 66773, fuel: natural gas. Including condenser and MSR 2 control. Documentation available.

Nominal output: 364kW, max. ambient temperature: 27°C, weight: 4.2t, with Combined Heat and Power Plant Köhler Ziegler SY 050 GKT, electrical output: 50kW, thermic output: 80kW, rotational speed: 1500/min, fuel: natural gas.

MAN 3262 E302 275-550 kw electric power, 50 Hz plug and play units IN/Outdoor Container . All info in request PM Thanks previously advance

Diesel combined heat and power plant, CHP, generator set, power generator used A. van Kaick Year: 1991 Generator DKBN49/200-4 200 kVA 400/231 V 289 A 50 Hz Mtu 8V183TA32 MERCEDES OM 442A 240 kW 1500 rpm Tank dimensions approx. 3600 x 1500 x 1500 mm Dimensions container: approx. Mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

Diesel combined heat and power plant, CHP, generator set, power generator used DIETER KUNZLER GmbH Generator K-EA-3ST-PAR-SYN-M 500 kVA 400/231 V Synchronous 3x 362 A 50 Hz Mtu 12 V 183 AA 31 MERCEDES OM 424 225 kW 1500 rpm Dimensions unit: approx. 2500 x 1200 x 1500 mm, control cabinet approx. 2400 x 500 x 2000 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

Diesel combined heat and power plant, CHP, generator set, power generator used DIETER KUNZLER GmbH Year: 1991 Generator 250DMED 250 kVA 400/231 V 3x 362 A 50 Hz Mtu 12 V 183 AA 31 MERCEDES OM 424 225 kW 1500 rpm Container dimensions: approx. 6000 x 2500 x 2500 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.