british flag
Resale Logo

power boiler used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information dealer of used printing presses  CGM Celik Graphische Maschinen  http://www.cgm-celik.de 
banner logo
start page > keywords power boiler > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
125465474 1101

ATLAS COPCO QAS 200 VD for sale
Generators


4 identical units available Electronic speed control: 50 HZ / 60 HZ Motor: 6 cylinder Volvo Diesel Motor type: TAD 733 GE Motor power: 179 kW / 50 HZ continious power Alternator: Mecc-Alte ECO 38 - 3S/4 Continious  ...
used machine
 
4 identical units available
Electronic speed control: 50 HZ / 60 HZ
Motor: 6 cylinder Volvo Diesel
Motor type: TAD 733 GE
Motor power: 179 kW / 50 HZ continious power
Alternator: Mecc-Alte ECO 38 - 3S/4
Continious power: 200 kVA
Hours of operation: Approx. 5500/6400/6600/7100 - April 2018
2011
Price  
  AT   request
125463344 1513

IVECO MTD.CNM.350 Generator 500kVA With Hot Water Boiler for sale
Scissor lifts


; Power [PS]: 475; Gross weight [kg]: 18000; Engine: Iveco; Accessories: Generator 500kVA With Hot Water Boiler, , MHKW Systems., , Manufacturer Engine: Iveco, Typ Engine: MTD, CNM, 350, Manufacturer Generator: AVK, Typ  ...
used machine
 
; Power [PS]: 475; Gross weight [kg]: 18000; Engine: Iveco; Accessories: Generator 500kVA With Hot Water Boiler, , MHKW Systems., , Manufacturer Engine: Iveco, Typ Engine: MTD, CNM, 350, Manufacturer Generator: AVK, Typ Generator: DSG52M1.4, Year: 1994, Fuel: Diesel, Serial Number Engine: 000173, Serial Number Generator: 66162
1994
13,000 €  
  NL   request
125465470 1101

ATLAS COPCO QAS 150 for sale
Generators


2 identical units available Electronic speed control: 50 HZ / 60 HZ Rated speed: 1500 / 1800 rpm Continious power: 150 / 165 kVA Net power: 132 / 140 kW Motor: 6 cylinder Volvo Diesel Motor type: TAD 731 GE Altern ...
used machine
 
2 identical units available
Electronic speed control: 50 HZ / 60 HZ
Rated speed: 1500 / 1800 rpm
Continious power: 150 / 165 kVA
Net power: 132 / 140 kW
Motor: 6 cylinder Volvo Diesel
Motor type: TAD 731 GE
Alternator: Mecc-Alte
Hours of operation: Approx. 5900 and 6900 / April 2018
2011
Price  
  AT   request
125401270 1300

PFEIFFER BALZERS GROUP MOV 441 for sale
Soldering Furnace


temperature max.: ° internal length of the oven: mm internal width of the oven: mm total power requirement: 115 kVA weight of the machine ca.: 3,0 t dimensions electric cabinet: 850 x 650 x 2050 mm dimension machine [. ...
used machine
 
temperature max.: °
internal length of the oven: mm
internal width of the oven: mm
total power requirement: 115 kVA
weight of the machine ca.: 3,0 t
dimensions electric cabinet: 850 x 650 x 2050 mm
dimension machine [...]: 4,2 x 4,0 x 3,1 m
VACUUM HEAT TREATMENT OVEN - HIGH VACUUM OVEN
Plant consists of:

Vacuum soldering oven: Boiler type MOV 441, size Ø 850 x 1400mm, working space Ø 500 x 500mm with 100 liter volume, operating temperature max. 1,400 ° C, heating capacity 90 kVA, compressed air min./max .: 5/7 bar,
Refrigerant Cooling gas = rapid cooling Run approx. 60 l / min, temperature max. 27 ° C

2 pieces of suction devices:
  Suction unit type WKP 2000, pumping speed 2,150 m³ / h, drive power 5,5 kW, speed 2,886 rpm, size: L: 1300xW: 600xH: 1400mm
  -Sauggerät TypDUO 250A, pumping speed 250 m³ / h, drive power 7,5 kW, speed 960 U / min, size: L: 1300xW: 500xH: 1200mm

4 pieces of vacuum pumps:
  Pre-vacuum pump: DUO 250A rotary pump
  -Fine vacuum pump: Roots pump WKP 2000
  -High vacuum pump: DIF 400 oil diffusion pump
  -Fast cooling = Roots pump WKP 1000 SP

Transformer type DFBC 100/1, built in 1987, rated power 90 kVA, size L: 980xB: 980xH: 1150mm
including documentation

Plant is not connected!
1987
Price  
    request
125465461 1102

MAN E 2876 LE 202 for sale
Gas engines


Power: 220 kW Rotation speed: 1500 1/min. Suitable generator, gas control line, exhaust heat exchanger and value heat exchanger available, price on request.
used machine
 
Power: 220 kW
Rotation speed: 1500 1/min.
Suitable generator, gas control line, exhaust heat exchanger and value heat exchanger available, price on request.
2014
Price  
  DE   request
125365949 1900

AIRPRESS LM 50-350 for sale
Compressor


Weight approx.: 60 kgDimensions (l x w x h) approx.: 800 x 450 x 680 mmDescription: Capacity 350 l/min, boiler capacity 50 ltr., motor power 2,0 kW, connected power 230 V, operating power 8 bar, see photos for details

 
Weight approx.: 60 kg
Dimensions (l x w x h) approx.: 800 x 450 x 680 mm
Description: Capacity 350 l/min, boiler capacity 50 ltr., motor power 2,0 kW, connected power 230 V, operating power 8 bar, see photos for details
 
Price  
  NL   request
125465426 1107

VIESSMANN Vitobloc 200 EM-140 for sale
CHP Unit


Motor: MAN E 2876 E 312 Generator: Leroy-Somer Fuel type: Natural gas Electrical power: 140 kW Thermal power: 209 kW Hours of operation: Approx. 900 The unit is like new, was only used for test phase. All demage p ...
used machine
 
Motor: MAN E 2876 E 312
Generator: Leroy-Somer
Fuel type: Natural gas
Electrical power: 140 kW
Thermal power: 209 kW
Hours of operation: Approx. 900
The unit is like new, was only used for test phase.
All demage parts are reconditioned.
Test run was carried out.
2016
Price  
  DE   request
125365950 1900

AIRPRESS LM 100-350 for sale
Compressor


Weight approx.: 70 kgDimensions (l x w x h) approx.: 1200 x 500 x 850 mmDescription: Capacity 350 l/min, boiler capacity 100 ltr., motor power 2,0 kW, connected power 230 V, operating power 8 bar, see photos for details

 
Weight approx.: 70 kg
Dimensions (l x w x h) approx.: 1200 x 500 x 850 mm
Description: Capacity 350 l/min, boiler capacity 100 ltr., motor power 2,0 kW, connected power 230 V, operating power 8 bar, see photos for details
 
Price  
  NL   request
125465354 1102

DEUTZ F4L1011F for sale
Diesel engines


Good running used Deutz engine (diesel) type F4L1011F 40 kW at 2800 rpm We have a wide range of new and used engines in stock. Please do not hesitate to contact US for pricing or availability.
used machine
 
Good running used Deutz engine (diesel) type F4L1011F

40 kW at 2800 rpm

We have a wide range of new and used engines in stock.
Please do not hesitate to contact US for pricing or availability.
 
Price  
    request
125364850 107

A&N PLANT SAR 2400 for sale
Mot.Behaelter-, boiler turning device


Technical data: -Total Traglast 120,000 kg -Powered capacity + revolving unit 60,000 kg -Container diameter approx. 450-5200 mm -self-centering joint roller stands - roll diameter approx. 500 mm -Roller bearing su ...
used machine
 
Technical data:

-Total Traglast 120,000 kg
-Powered capacity + revolving unit 60,000 kg
-Container diameter approx. 450-5200 mm
-self-centering joint roller stands - roll diameter approx. 500 mm
-Roller bearing surface of the castors 360 mm
-powered unit + revolving unit with rubber-coated rollers
-Roller bearing surfaces without significant wear and tear
-infinitely variable rotation speed 75-1500 mm / min
-Remote control for re - and Li-powered race - 400 V
-Space angetr. Unit B approx. 3600 x H 1500 X 1600 mm
-Motoryacht. with running unit B approx. 2600 x H 1500 x D 1300 mm
-Weight angetr. Unit weight approx. 7300 kg - CA. 4500 kg with running unit
2007
Price  
    request
125465352 1102

DEUTZ F2L511 for sale
Diesel engines


Good running used Deutz engine (diesel) type F2L511 We have a wide range of new and used engines in stock. Please do not hesitate to contact US for pricing or availability.
used machine
 
Good running used Deutz engine (diesel) type F2L511

We have a wide range of new and used engines in stock.
Please do not hesitate to contact US for pricing or availability.
 
Price  
    request
125203605 702

HEUFT Vulkan for sale
Tunnel oven


Manufacturer: HeuftType: Vulkan Tunnelofen Year of manufacture: 1998- With thermal oil- 1 heating boiler Heuft HKZ (power 300kW)- Back area: 41,82qm- Bandwidth: 210cm- Oven Length: 2040cm- Oven Width: 315cm- Oven Depth: ...
used machine
 
Manufacturer: Heuft
Type: Vulkan Tunnelofen 
Year of manufacture: 1998
- With thermal oil
- 1 heating boiler Heuft HKZ (power 300kW)
- Back area: 41,82qm
- Bandwidth: 210cm
- Oven Length: 2040cm
- Oven Width: 315cm
- Oven Depth: 2096cm
- Oven Height: 165cm
- Solenoid valve opening: 6-8 sec.; Good condition
1998
125,000 €  
    request
125465348 1102

DEUTZ F2L712 for sale
Diesel engines


Good running used Deutz engine (diesel) type F2L712 We have a wide range of new and used engines in stock. Please do not hesitate to contact US for pricing or availability.
used machine
 
Good running used Deutz engine (diesel) type F2L712

We have a wide range of new and used engines in stock.
Please do not hesitate to contact US for pricing or availability.
 
Price  
    request
125066897 107

HEINRICHSGLÜCK RA 30 for sale
MOT. Container. Boiler device


Technical data: -Total load powered + revolving unit 30000 kg -Load container device 15000 kg -Workpiece diameter approx. 500-3500 mm -Distance of the articulated arms one. adjustable - diame ...
used machine
 
Technical data:

-Total load powered + revolving unit 30000 kg
-Load container device 15000 kg
-Workpiece diameter approx. 500-3500 mm
-Distance of the articulated arms one. adjustable - diameter each 4 x per mounting arm 300 mm
-Roll width each 4 times a supporting arm 90 mm
-infinitely variable rotational speed approx. 100 - 1500 mm/min
-Hand-held remote controls for re - and p-drive run - 400 V
-Space angetr. Unit approx. B H 1800 x 1200 X 1000 mm
-Motoryacht. with ongoing unit approx. B H 1800 x 1200 X 700 mm
-Weight angetr. Unit approx. Weight with running unit approx. 1800 kg- 1200 kg
1992
Price  
    request
125465344 1102

HATZ 1D60C for sale
Diesel engines


Good running used HATZ engine (diesel) type 1D60C We have a wide range of new and used engines in stock. Please do not hesitate to contact US for pricing or availability.
used machine
 
Good running used HATZ engine (diesel) type 1D60C

We have a wide range of new and used engines in stock.
Please do not hesitate to contact US for pricing or availability.
 
Price  
    request
125042074 107

ESAB PEMA 25T for sale
MOT. Container boiler turning device


Technical data: -Total Traglast 25000 kg -Powered capacity + revolving unit 12500 kg -Container diameter approx. 500-4500 mm -self-centering joint roller stands - roll diameter approx. 350 mm -Roller bearing surfa ...
used machine
 
Technical data:

-Total Traglast 25000 kg
-Powered capacity + revolving unit 12500 kg
-Container diameter approx. 500-4500 mm
-self-centering joint roller stands - roll diameter approx. 350 mm
-Roller bearing surface of the triple roles 240 mm
-powered unit + revolving unit with rubber-coated rollers
-Roller bearing surfaces without significant wear and tear
-infinitely variable speed 60-1200 mm / min
-Remote control for re - and p-motion + speed
-400 V drive
-Rail chassis to the drive.-+ tracking end unit
-Space angetr. Unit B approx. 2600 x H T 1000 x 1400 mm
-Motoryacht. with ongoing unit approx. B 2100 x H T 1000 x 1400 mm
-Weight angetr. Unit weight approx. 1200 kg - 800 kg with running unit
1990
Price  
    request
125465339 1102

DEUTZ BF4L914 for sale
Diesel engines


Good running used Deutz engine (diesel) type BF4L914 71 kW at 260 rpm We have a wide range of new and used engines in stock. Please do not hesitate to contact US for pricing or availability.
used machine
 
Good running used Deutz engine (diesel) type BF4L914

71 kW at 260 rpm

We have a wide range of new and used engines in stock.
Please do not hesitate to contact US for pricing or availability.
 
Price  
    request
124981794 702

REGO SM Vario for sale
Stirring Machine


Stroke machine stirring machine Rego Model: SM Vario 2 working functions (1 stirring / 1 hitting) Powerful and robust technology Boiler lighting, timer 1 new stainless steel boiler (30 or 40 liters) 1 beater ne ...
used machine
 
Stroke machine stirring machine
Rego
Model: SM Vario

2 working functions (1 stirring / 1 hitting)
Powerful and robust technology
Boiler lighting, timer
1 new stainless steel boiler (30 or 40 liters)
1 beater new
1 whisk new
Stepless power adjustment and rash adjustment,
Boiler height adjustment,
DGUV V3 tested
Connection 400V, 2 kW, 16A CEE plug

Used machine overhauled with 6 months warranty!
2004
Price  
    request
125465311 206

ITALPRESSE UT6L for sale
Hydraulic veneering presses


HOT PRESS Type ITALPRESSE UT/6L Solid Steel Plates heathed by water with wood fired boiler useful size plates mm. 2500 x 1300 n.06 cylinders diam.mm. 70 max. open mm. 650 hydraulic pump motor power Hp 2 Thrust Ton ...

 
HOT PRESS Type ITALPRESSE UT/6L
Solid Steel Plates
heathed by water with wood fired boiler
useful size plates mm. 2500 x 1300
n.06 cylinders diam.mm. 70
max. open mm. 650
hydraulic pump motor power Hp 2
Thrust Ton.120
max. pressure 4 kg/cm2

complete with security systems. perimeter rope
closing by bimanual buttons
opening by electric button
exclusion of 2 cylinders from the control panel
Volt. 380/50
net weigth kgs.4500
working conditions : Excellent
 
Price  
  IT   request
124940414 212

COMPAIR L 90-13A for sale
Compressor, Boiler & Refrigeration Dryer


Weight approx.: 2380 kgDimensions (l x w x h) approx.: 2080x1640x1880 mmmain motor: 90 kWpower: 12,6 m³Description: COMPAIR L 90-13A Compressor Compair L 90-13A Year of construction 2001 Engine power 90 kW Flow rate o ...
used machine
 
Weight approx.: 2380 kg
Dimensions (l x w x h) approx.: 2080x1640x1880 mm
main motor: 90 kW
power: 12,6 m³
Description: COMPAIR L 90-13A Compressor Compair L 90-13A Year of construction 2001 Engine power 90 kW Flow rate of 12.6 m³/min max. pressure 13 bar Control Delcos 3000 Operating hours 53,206 B/h Commissioning 09.2001 Test run carried out, New list price 47.100,00 Euro net
2001
used machinery auction RESALE 3,500 €  
  DE   request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold

Sold machinery

CNC Bending Machines Durma AD-S 30100


OVERVIEW: Brand: Durma Model: AD-S 30100 Application type: Bending Machine type: Bending Machine Availability: Immediately Construction year: 2013 Production hours: 18979 Location: Turkey Origin country: Turkey GENERAL DATA: Measurements width: 2600 mm Measurements depth: 4500 mm Measurements height: 3100 mm Machine weight: 9500 kg MAIN DRIVE: Pressing force: 100 kN Bending length: 3050 mm CONTROL UNIT: Brand: CYBELEC Model: ModEva 10S MEDIA: Main electronic connection: 400 V Power consumption: 11 kVA ADDITIONAL EQUIPMENT: 1 - Tools 2 - Back Guard with safety switch 3 - Laser Light Front Guards

CNC Bending Machines AMADA SPH-30C


OVERVIEW: Brand: AMADA Model: SPH-30C Application type: Bending Machine type: Bending Machine Availability: Immediately Construction year: 1989 Location: Estonia Origin country: Japan GENERAL DATA: Measurements width: 1000 mm Measurements depth: 1575 mm Measurements height: 2230 mm Machine weight: 2450 kg MAIN DRIVE: Pressing force: 300 kN Bending length: 100 mm CONTROL UNIT: Brand: AMADA MEDIA: Main electronic connection: 230/400/460 V / 50/60 Hz Power consumption: 3 kVA

Milling machine centers MORI SEIKI MV-45/40


OVERVIEW: Brand: MORI SEIKI Model: MV-45/40 Application type: Milling Machine type: Machining Center Availability: Immediately Construction year: 1986 Production hours: 28000 Location: Netherlands Origin country: Japan GENERAL DATA: Measurements width: 3800 mm Measurements depth: 3500 mm Measurements height: 3150 mm Machine weight: 8000 kg MAIN DRIVE: Number of spindle: 1 Spindle speed range: 6000 1/min CONTROL UNIT: Brand: Fanuc Model: 11M MOVEMENT: X-AXIS movement: 800 mm Y-AXIS movement: 460 mm Z-AXIS movement: 510 mm WORKPIECE: Workpiece drm: 160 mm Workpiece weight: 1000 kg TABLE: Outer length: 1200 mm Outer width: 460 mm TOOLS: Max weight: 20 kg Max tool diameter: 95 mm Max tool length: 300 mm MEDIA: Main electronic connection: 380 V Power consumption: 22 kVA Chip conveyer: yes Internal cooling: yes

Generators Atlas Copco QAS 200 VD


4 identical units available Electronic speed control: 50 HZ / 60 HZ Motor: 6 cylinder Volvo Diesel Motor type: TAD 733 GE Motor power: 179 kW / 50 HZ continious power Alternator: Mecc-Alte ECO 38 - 3S/4 Continious power: 200 kVA Hours of operation: Approx. 5500/6400/6600/7100 - April 2018

Generators Atlas Copco QAS 150


2 identical units available Electronic speed control: 50 HZ / 60 HZ Rated speed: 1500 / 1800 rpm Continious power: 150 / 165 kVA Net power: 132 / 140 kW Motor: 6 cylinder Volvo Diesel Motor type: TAD 731 GE Alternator: Mecc-Alte Hours of operation: Approx. 5900 and 6900 / April 2018

CNC Bending Machines Gasparini PBS 135/4000


OVERVIEW: Brand: Gasparini Model: PBS 135/4000 Application type: Bending Machine type: Bending Machine Availability: Immediately Construction year: 2003 Location: Spain Origin country: Italy GENERAL DATA: Measurements width: 4250 mm Measurements depth: 1700 mm Measurements height: 2750 mm Machine weight: 14000 kg MAIN DRIVE: Pressing force: 1350 kN Bending length: 4000 mm CONTROL UNIT: Brand: Delem Model: DA-65 MEDIA: Main electronic connection: 380 V / 50 Hz Power consumption: 15 kW

Gas engines MAN E 2876 LE 202


Power: 220 kW Rotation speed: 1500 1/min. Suitable generator, gas control line, exhaust heat exchanger and value heat exchanger available, price on request.

Gas engines MAN E 0836 LE 202


Power: 110 kW Rotation speed: 1500 1/min Suitable generator, gas control line, exhaust heat exchanger and value heat exchanger available, price on request.

Steam Turbine Backpressure Turbine B+V Industrietechnik MARC 2 - B10


Power: 9210 kW Live-steam pressure: 73 bar Live-steam temperature: 520° C Extraction pressure: 16 - 20 bar Exhaust steam pressure: 1,5 - 2,5 bar Generator: LDW GmbH 14040 kVA Trafo 15000 kVA

CHP Unit Viessmann Vitobloc 200 EM-140


Motor: MAN E 2876 E 312 Generator: Leroy-Somer Fuel type: Natural gas Electrical power: 140 kW Thermal power: 209 kW Hours of operation: Approx. 900 The unit is like new, was only used for test phase. All demage parts are reconditioned. Test run was carried out.

Smoke chamber Vemag 2 trolleys


Condition: Overhauled Technical data: • overall dimensions 1600x2500x2900 mm; • 2 trolleys 1000x1000x2000 mm; • power heating 52 kW; • power supply 400 V; • computer control Mikster; • smoke generator Fessmann RZ550 115; • smoke generator dimensions 550x1200x1580 mm; • power engine 0.7 kW; • power heating 1.0 kW.

Pipe Bending Machines BLM SMART


OVERVIEW: Brand: BLM Model: SMART Application type: Bending Machine type: Bending Machine Availability: Immediately Construction year: 2015 Production hours: 948 Location: Estonia Origin country: Japan GENERAL DATA: Machine weight: 720 kg CONTROL UNIT: Brand: SIEMENS Model: SIMATIC HMI MEDIA: Main electronic connection: 400 V Power consumption: 11 kVA ADDITIONAL EQUIPMENT: 1 - BLM CARM7 Bar loader 2 - YASKAWA Motoman Robot

Vertical Milling Machines DECKEL FP4A


OVERVIEW: Brand: DECKEL Model: FP4A Application type: Milling Machine type: Milling Machine Availability: Immediately Construction year: 1991 Production hours: 32000 Location: Netherlands Origin country: Germany GENERAL DATA: Measurements width: 3000 mm Measurements depth: 2700 mm Measurements height: 1630 mm Machine weight: 1950 kg MAIN DRIVE: Number of spindle: 1 Spindle speed range: 4000 1/min CONTROL UNIT: Brand: Grundig Model: Dialog 11 MOVEMENT: X-AXIS movement: 560 mm Y-AXIS movement: 500 mm Z-AXIS movement: 390 mm WORKPIECE: Workpiece drm: 80 mm Workpiece x: 485 mm Workpiece y: 385 mm Workpiece z: 380 mm Workpiece weight: 800 kg TABLE: Outer length: 900 mm Outer width: 530 mm TOOLS: Max weight: 450 kg Max tool diameter: 40 mm Max tool length: 150 mm MEDIA: Main electronic connection: 380 V Power consumption: 16.5 kVA Internal cooling: yes ADDITIONAL EQUIPMENT: 1 - 1x Tool holder

Circular press FPA PXW 100 AAb


Press obwiedniowa of varying matrix FPA PXW 100 AAb was built by the factory Automatic Presses Warsaw, Poland-Italy. FPA press-specific data PXW 100 AAb: largest diameter: 100 mm -pressure: 160 T -stroke: 140 mm -the amount of fluctuation matrix: 1500 l/min. -engine power: 17 kW -the engine speed: 3000 l/min. -pump motor power: 11 kW -the engine speed pump drive: 1000 l/min. -the power of pump motor battery: 0.8 kW -the engine speed pump battery: 1500 l/min. -weight of the machine: 53000 kg

Guillotine Shears STROJARNE PIESOK NTC 2000/4


Guillotine STROJARNE PIESOK NTC 2000/4 were produced in 1987. Shears allow cutting of materials with different strength such as steel, aluminium, copper, etc. The materials with a tensile strength of more than 450 MPa cut material thickness must be correspondingly reduced. In the case of less strength than the 450 MPa can cut materials with a greater thickness, which the breakdown does not exceed 8 mm. The thickness of the material to be cut, depending on the strength of: aluminum 200 MPa: 6 mm copper 250 MPa: 5.3 mm nickel 400 MPa: 4.2 mm steel 450 MPa: 4 mm steel 500 MPa: 3.8 mm brass 600 MPa: 3.4 mm steel 700 MPa: 3.2 mm steel 800 MPa: 3 mm Technical parameters of the guillotine NTC 2000/4: -maximum thickness sheet with pt = 450 MPa: 4 mm -maximum cutting length: 2050 mm -cutting angle: 1.33 degree -outreach in the stands: 200 mm -number of jumps continuous operation at idling speed: 60 RPM -the minimum thickness of the metal: 0.4 mm -the minimum width of the webs: 10s mm (s-thickness) -the maximum radius of curvature of the knife: 0, 05s mm (s-thickness) -cut on the rear bumper, the maximum width without brackets: 300s mm (s-thickness) -position the rear bumper: 4-750 mm -installed power: 5 kVA -the power of main motor: 4 kW -engine power bumper: 0.25 kW -overall dimensions of the device (l x w x h): 2600 x 1600 x 1500 mm -Cutter weight: 3400 kg -foot pedal -DTR, a technical-functional

Horizontal Machining Center SCHARMANN Ecocut 1.3


X-travel: 2200mm, y-travel: 1600mm, z-travel: 1400mm, max. table load: 5t, quill diameter: 125mm, clamping surface: 4x 1000x1200mm, 2x 1250x1600mm, drive power: 30kW, with pallet changer.

Horizontal Milling Machine BURKHARDT WEBER MC 80


X-travel: 1600mm, y-travel: 1000mm, z-travel: 800mm, B-travel: 360°, max. table load: 3t, drive power: 20kW, clamping surface: 2x 800x800mm, with pallet changer.

WIDE BELT SANDER SCM SANDYA UNO CS SCM SANDYA UNO CS


Wide belt sanders Scm Sandya UNO CS working width mm. 900 nr. 2 units I° calibrator unit II° combinet roller/pad motor power KW 7,5 rpm 2800

Vertical Machining Center WERNER PFZ 1500


X-travel: 2700mm, y-travel: 2300mm, z-travel: 750mm, max. tabel load: 8t, clamping surface of 3 pallets: 1900x1500mm, drive power: 50kW, control: SIEMENS SINUMERIK.

Jig Boring Machine SIP HAUSER MP-54


X-travel: 650mm, y-travel: 450mm, z-travel: 500mm, clamping surface: 770x630mm, max. table load: 500kg, drilling spindle stroke: 160mm, drive power: 5kW.

CNC Long Turning Automatics POLYGIM DIAMOND 32 CSB SWISS TYPE


Automatic longitudinal turning Swiss POLYGIM DIAMOND CSB 32 SWISS TYPE was built in 2008. Technical data for CNC lathes POLYGIM DIAMOND CSB 32 SWISS TYPE: CNC Control: MITSUBISHI Working range: -maximum turning diameter: fi 33 mm -maximum turning length: 250 mm -the maximum diameter of drilling: fi 15 mm -the maximum diameter of the thread: M10 Processing of external diameters: -quantity: 5 PCs. -dimension of the CAP: 16 x 16 x 120 mm Treatment of internal diameter: -quantity: 4 PCs. -Sleeve dimension: 13 mm (ER20) Transverse driven tool:-number of tools: 3 PCs. -Sleeve dimension: 13 mm (ER20) -speed: 200-6000 RPM. Tools from the back to the internal diameter: -quantity: 4 PCs. -Sleeve dimension: 13 mm (ER20) Tool driven to face: -number of tools: 3 front, 3 rear -Sleeve dimension: 10 mm (ER16) -speed: 3000 rpm. Main spindle:-spindle bore diameter: fi 36 mm -spindle speed: 200-8000 RPM. -Spindle bore diameter: subspindle steals: fi 36 mm -spindle speed steals: 6000 RPM. -the maximum spindle stroke: 220 mm rapid feeds X, Y, Z: 18 m/min. Engines: -spindle motor: 5.5 kW -spindle motor steals: 1.5 kW -drive motors. X/Y/Z axis: 0.5 kW -Coolant pump motor: 0.55 kW -lubrication: 4 -power supply: 8.67 kW -the spindle axis height: 960 mm Machine dimensions:-overall dimensions: 2550 x 1140 x 1568 mm -weight: 2788 kg Compressed air supply: -Outlook: 10 l/min. -pressure: 5 kg/cm Equipment: -subspindle -lighting of the workspace -cooling system -orientation of przeciwwrzeciona every 5 degrees -sensor cut off part-receiver detail -Guide ring Rod fixed and Rotary -5 pieces of the outer surface of the turning handles -4 desktop holders for turning the inner surface of the -4-position for desktop tools for turning the inner surface of the rear -6-powered tool for working the transverse -3 to-powered tool to work from the front -3 to-powered tool to work from behind -automatic bar feeder: Fedek SUNNY 542 (3.2 m) -chip conveyor

Vertical Processing Centers DMG DMU 80 monoblock


Producer ..... DMG Year manufacture/Year overhaul ..... 2006 Control system Heidenhain ..... TNC 530 Clamping area of table ..... 1270x700 mm Travel X-axis ..... 980 mm Travel Y-axis ..... 630 mm Travel Z-axis ..... 630 mm Spindle speed ..... 20 - 12000 /min. Number of driven axes ..... 5 Cooling through spindle Pressure of cooling ..... 40 bar Spindle taper ..... SK 40 . Tool magazine Number of positions in magazine ..... 32 Max. load of table ..... 650 kg Control panel with handwheel, 3D probe, paper filtration. possible to test under power.

Cylindrical Grinding Machine TSCHUDIN HTG 430


Center distance: 480mm, center height: 100mm, grinding wheel diameter: 500mm, max. grinding wheel width: 80mm, grinding wheel bore: 203.2mm, motor power: 5.5kW, spindle cone: MK 4, spindle nose: 3x M48, swivelling range: 360°, rotational speed: 65-500/min, quill cone: MK 3, quill stroke: 20mm, length: 2200mm, width: 1700mm, weight: 2.6t.

Grinding Machine DELAPENA SPEEDHONE EM


Working diameter: 1.143-79.375mm, spindle speed: 200-2500/min, motor power: 1.5kW, stroke length: 0-150mm, stroke speed: 60-350double strokes/min, stroke motor power: 0.37kW, length: 1210mm, width: 1210mm, height: 1680mm, weight: 225kg.

Compressor KAESER SK 21


Power: 11kW, motor rotational speed: 2950/min, max. operational overpressure: 11bar, ambient temperature: 3-45°C, operational hours: ca. 48000h.

Horizontal boring machine TOS H100 A


X - the table is transversal, 1250 mm Y - spindle turret upright, 1000 mm Z - table longitudinally, 1250 mm W - spindle extension, 900 mm Spindle diameter, 100 mm Morse spindle cone execution 6 Power of the drive of the main motion, 7,5 kW Working surface of the table, 1250x1250 mm Capacity of the table, 3000 kg The speed of rotation of the flatbed, 0.8 ... 800 rpm Overall dimensions of the machine (LxBxH), 6000 x 3700 x 3000 mm Total machine weight 13500 kg

Furnaces Naber 2,2 m3


Selling rarely used Naber furnace. Max. heating temperature 1340 C; Outer dimmensions - 3200(L)x1700(W)x2200(H). Power supply - 120 kW. Furnace is in good condition, just new controler and clamps should be installed.

Turning Machines (Lathes) NAKAMURA-TOME TW-20 MMY


OVERVIEW: Brand: NAKAMURA-TOME Model: TW-20 MMY Application type: Turning Machine type: Lathe Availability: 01/08/2018 Construction year: 1997 Production hours: 35200 Location: Turkey Origin country: Japan GENERAL DATA: Measurements width: 3645 mm Measurements depth: 2179 mm Measurements height: 2200 mm Machine weight: 6500 kg MAIN DRIVE: Number of spindles: 2 Spindle speed range: 50-5000 1/min CONTROL UNIT: Brand: FANUC Model: Series 18-T MAIN DRIVE: X-AXIS movement: 195 mm Y-AXIS movement: 40 mm Z-AXIS movement: 265 mm WORKPIECE: Workpiece drm: 51 mm TURRET: Number of turrets: 2 TOOLS: Max tool diameter: 25 mm MEDIA: Main electronic connection: 50 Hz / 3 P Power consumption: 77 kVA Chip conveyer: yes Internal cooling: yes ADDITIONAL EQUIPMENT: 1 - Kamsan Bar Loader 2 - 1x 0° Live Tool 3 - 1x 90° Live Tool

Turning Machines (Lathes) NAKAMURA-TOME W-20 MMY


OVERVIEW: Brand: NAKAMURA-TOME Model: TW-20 MMY Application type: Turning Machine type: Lathe Availability: 01/08/2018 Construction year: 1995 Production hours: 1637 Location: Turkey Origin country: Japan GENERAL DATA: Measurements width: 3645 mm Measurements depth: 2179 mm Measurements height: 2200 mm Machine weight: 6500 kg MAIN DRIVE: Number of spindles: 2 Spindle speed range: 50-5000 1/min CONTROL UNIT: Brand: NAKAMURA-TOME Model: LUCK-BEI MAIN DRIVE: X-AXIS movement: 195 mm Y-AXIS movement: 40 mm Z-AXIS movement: 265 mm WORKPIECE: Workpiece drm: 51 mm TURRET: Number of turrets: 2 TOOLS: Max tool diameter: 25 mm MEDIA: Main electronic connection: 50 Hz / 3 P Power consumption: 77 kVA Chip conveyer: yes Internal cooling: yes ADDITIONAL EQUIPMENT: 1 - IEMCA Bar Loader 2 - 1x 0° Live Tool 3 - 1x 90° Live Tool 4 - Loading Robot

Hydraulic Presses PHM 63 PHM 63


Hydraulic presses PHM 63. Characteristic data of the press PHM 63:-force pressing: 63 t -the strength of open: 33 t -stroke: 300 mm -closing speed: 136 mm/s. -Ironing speed: 4.3 mm/s. -opening speed: 122 mm/s. -cylinder bottom przet?ocznik, ejector -the power of przet?oku/discard: 16 t -the strength of return: 10 t -speed of the pumping/discard: 13 mm/s. -the speed of return: 21 mm/s. -the clearance between the tables: 600 mm-dimensions tables: 500 x 500 mm -fixing form/cross-slots for screws: M20 -tank capacity: 150 l/dm3 -measured oil temperature in the tank should not exceed: 45 degrees C -electric motor: 4 kW -maximum pressure: 320 kG/cm2, 32 MPa -low pressure: 25 kG/cm2, 2.5 MPa -supply voltage: 3 x 380/220 V -dimensions (l x w x h): 710 x 1580 x 2200 mm -net weight: 2100 kg

Tube Bending Machines SCHWARZE WIRTZ PERFEKT WE 100 D T870


Bender socket key SCHWARZE WIRTZ PERFEKT in 100 D T870 built in 1975. Hydraulic bending machine for tubes with electro-hydraulic control system, as well as with pressure device sliding Rails and with hydraulic mandrel drawing inferences is intended primarily for tube bending with mandrel. Specific data: -maximum capacity: 114 mm tube diameter x 6.3 mm wall thickness (for maximum tensile strength 45 kp/mm2) -maximum torque resistance: 55 cc -minimum pipe diameter: 22 mm -the maximum bending radius: 500 mm -minimum bending radius: 50 mm -the maximum bending angle: 180 degrees -the length of the plate shaft steady rest: 4000 mm -bending direction: right -the maximum bend speed, running forward: 0-3.25 RPM continuous adjustment -the maximum bend speed, running back: 5.4 RPM. constant -main motor power: 22 kW -total power requirement: 25 kW Equipment for bending SCHWARZE WIRTZ PERFEKT in 100 D T870: -hydraulic bending with mandrel -traffic control creep -automatically select angle -the length limiter system with 4 fingers przyporowymi -mandrels to sections: 20 PCs. -dies holding the pipe bending: 16 PCs.

Turning Machines (Lathes) DMG MORI NLX 2500/500


OVERVIEW: Brand: DMG MORI Model: NLX 2500/500 Application type: Turning Machine type: Lathe Availability: Immediately Construction year: 2014 Production hours: 3171 Location: Hungary Origin country: Japan GENERAL DATA: Measurements width: 2200 mm Measurements depth: 1900 mm Measurements height: 1826 mm Machine weight: 4200 kg MAIN DRIVE: Number of spindles: 1 Spindle speed range: 4000 1/min CONTROL UNIT: Brand: DMG MORI ERGOLINE Model: CELOS MAIN DRIVE: X-AXIS movement: 260 mm Z-AXIS movement: 500 mm TURRET: Number of turrets: 1 ADDITIONAL EQUIPMENT: 1 - Power transformer 2 - Tool setter

Radial Drilling Machines Z 3050 X 16


Radial drilling machine with 3050 X 16 was built in 1989. This versatile general-purpose machine. It is suitable for drilling, countersinking, reaming, chamfering and thread cutting medium and large items. With the right equipment it is also possible to boring. Technical data drilling machine Z3050 X 16: -the maximum drilling diameter: 50 mm maximum range: 1600 mm -the maximum distance between the axis of the spindle and the column: 1600 mm -the minimum distance between the spindle axis and column: 350 mm -horizontal spindle head on your shoulder: 1250 mm -maximum distance from spindle face to the working surface of the base plate: 1220 mm (1250 mm) -minimum distance from spindle to base plate working surface: 320 mm (350 mm) -vertical stroke in column: 580 mm -arm lifting speed: 0.02 m/sec. -angle of rotation of the arm: 360 degrees -taper in the spindle: Morsea Nr. 5 -spindle speed range: 25-2000 RPM. -number of spindle speeds: 16 PCs. -feed range: 0.04-3.2 mm/Rev. -the amount of feeds: 16 PCs. -extension: 315 mm -depth of feed per rotation of graduated: 122.5 mm -maximum permitted torque on the spindle: 490 Nm -maximum permitted weight spindle: 15680 N -the power of main motor: 4 kW -engine power lifting arm: 1.5 kW -engine power the hydraulic lock: 0.75 kW -Coolant pump motor power: 0.09 kW -overall dimensions (l x w x h): 2500 x 1060 x 2655 mm -weight of the machine: ok. 3500 kg (3900 kg with a column guide)

Eccentric Presses SMERAL LENP 40 A


Eccentric press SMERAL PRESSES OFFERING LENP 40 and was produced by the machine manufacturer SMERAL PRESSES OFFERING. Machine SMERAL PRESSES OFFERING LENP 40 and was built in 1977. Technical parameters of the press SMERAL PRESSES OFFERING LENP 40 and: -maximum pressure: 40 t -outreach: 220 mm -the range of adjustment stroke: 8-90 mm -adjustment range slider: 60 mm -the gap between the slider and a table with a maximum of spring, in the lower turning point on the wykr?conym a: 250 mm -between the walls of the body: 250 mm -lower table: 630 x 430 mm -bore in a slider-diameter/height: 40/75 mm -the maximum number of strokes per minute slider (continuous operation): 67 1/min -the number of possible jumps-the largest number of individual jumping: 60 1/min -the minimum length of the pitch slider: 8 mm -maximum length of the pitch slider: 90 mm -pitch fastening grooves: 280 mm -the dimensions of grooves in the table: 22 x 38 x 16 x 27 mm -the dimensions of grooves in the disc table: 22 x 37 x 16 x 27 mm mounting holes diameter/distance mounting holes: 24/200/580 degrees -draft: 28 degrees -mounting plate thickness: 60 mm -through hole in mounting plate: 200/220 mm -through hole in the interface plate/height weaning: 100/20 mm -main motor power: 3 kW (1420 RPM) -air consumption for one include: 4 l -basic power supply: 3 x 380/220 V 50/60 Hz -dimensions (l x w x h): 1080 x 1530 x 2110 mm -weight of the machine: 2480 kg Eccentric presses equipment SMERAL PRESSES OFFERING LENP 40A: -an intermediate table -foot control -set covers -DTR (technical motor)

Electric discharge drill - a puncher for holes BAOMA BMD 703


With drill-electric boring machine for hole BMD 703 was produced in 2007. The drill is new, unused. Technical data of the machine BMD 703: -the maximum drilling depth: up to 400 mm -diameter of (drilled) hole: fi 0,5-4 mm -working table dimensions: 400 x 320 mm -height, material thickness: 270 mm -burning time (drill) hole with a diameter of 1 mm, depth 100 mm: approx. 3 min. -power supply: 380 V, 50 Hz

CNC Turning Machines MATRA FUL 510x1000


CNC lathe MATRA FUL 510x1000 was produced in 2000. CNC lathe-specific data MATRA FUL 510x1000: -CNC control in Polish and German: Fagor 8055TC (the machine you can program the g code or supplement the ready field in marker overlays) machine reads dxf drawings -Turning length: 1000 mm -turning diameter: 510 mm -spindle speed: 5-2000 RPM -Chuck: fi 250 hydraulic head: 8 items VDi30 -extracted Bridge: increases the diameter of component manufacturing -taper tailstock: Morsea 5 -installed power: 13 KVA -size Lathes (l x w x h): 2500 x 1800 x 1900 mm -machine weight: 2.5 tons of equipment: a variety of high-quality knives for turning the company ISCAR

Double screw-type extruding machine FANGTAI FT 500-2


Twin-screw FANGTAI FT 500-2 produced in 1998 year. The machine has one screw diameter fi 50 mm and one snail with a diameter of 65 mm. Technical parameters of the machine screw diameter fi 50 mm: -screw diameter: fi 50 mm -L/D ratio of length to diameter of the cochlea: 28:1 -screw speed: 10-120 RPM -foil width: 200-550 mm -film thickness: 0.015-0.04 mm -main engine power: 7.5 kw -heating power: 30 kw -capacity: 50-100 kg/h. -weight: 2.8 t -dimensions (l x w x h): 5600 x 2600 x 1800 mm3 Technical parameters of the machine screw diameter fi 65 mm: -screw diameter: fi 65 mm -L/D ratio of length to diameter of the cochlea: 30:1 -screw speed: 10-120 RPM -foil width: 200-650 mm -film thickness: 0.015-0.04 mm -main engine power: 15 kw -heating power: 30 kw -capacity: 50-100 kg/h. -weight: 3 t -dimensions (l x w x h): 6000 x 1500 x 2500 mm3

Eccentric Presses TOMA LEN 63C


Eccentric press TOM LEN 63 c was produced in 2012. The machine allows to realize punching, cutting and punching. The press can work with different instruments. It is also possible to full automation of the work by arming its tape dispenser. Technical parameters of the presses LEN 63 C: -clamping force: 63 tons -table size: 800 x 630 mm -the surface of the slider: 450 x 280 mm -outreach: 315 mm -the number of jumps in: 65/130 min. -number of jumping manual work: 45/50 min. -adjust the pitch slider: 10-105 mm -the self-alignment capacity of slider: 70 mm -ground clearance table-slider: 335 mm -the ground clearance between columns: 355 mm -quantity: 2 -engine: 730/1440 min. -engine power: 4/7.5 kW -overall dimensions: 1425 x 1790 x 2550 mm -weight of the machine: 5850 kg Advantages of the press TOM LEN 63 C: -die-cast housing: grey cast iron -the possibility of setting the size of the pitch slider -the possibility of repositioning the slider -pneumatic balancing slider -accurate, extended, self-lubricating guiding slider -eccentric shaft fit rolling rod -molded friction clutch: brake, meeting the requirements of the provisions of safety at work

CNC Bending Machines AMADA RG1030EV3


OVERVIEW: Brand: AMADA Model: RG1030EV3 Application type: Bending Machine type: Bending Machine Availability: Immediately Construction year: 2008 Production hours: 23000 Location: India Country of origin: Japan GENERAL DATA: Measurements width: 2210 mm Measurements depth: 4030 mm Measurements height: 2470 mm Machine weight: 6400 kg MAIN DRIVE: Pressing force: 100 kN Bending length: 3100 mm Crowning available: CNC Daylight: 100 mm Throat: 400 mm Main motor power: 7.5 HP CONTROL UNIT: Brand: AMADA Model: NC9 Release: AMNCEv3 MOVEMENT: Backgauge-Z: 450 mm MEDIA: Main electronic connection: 400 V Power consumption: 10 kVA Air pressure: 5 bar Oil tank: 65 L

Heavy Lathes POREBA TCA 160


Heavy lathe POREBA TCA 160 was produced in 1959 by the famous Polish FUM POREBA. Technical data of lathe POREBA TCA 160: Scope of work:-height of tusks: 800 mm -maximum turning diameter over bed: 1600 mm -maximum turning diameter over support: 1300 mm -eyepiece: fi 800 mm -maximum turning diameter in the pó?okularze: 250 mm -maximum turning length: 6000 mm -maximum weight of workpiece between centers in: 16000 kG -permissible cross section of the chip (turning steel Rr = 60 kG/mm2) on a single support: 30 mm2 -permissible cross section of the chip (turning steel Rr = 60 kG/mm2) on a single support: 50 mm2 -permissible force on the knife: 6000 kG -the maximum torque at the spindle: 630000 kg.cm -the maximum cross section 70 x 70 mm knife: Cap Headstock: -number of spindle speeds: 24 n -the exponent of the speed: 1.25 -spindle speed range: 1,12-224 RPM., 1,12-224 r/min, 0.85-170 RPM. -front spindle neck diameter: 260 mm -slot in the spindle of the cone metric: # 120 -reducing Bush metric cone Tip: # 120/80 -spindle bore diameter: 105 mm -diameter of the blade Cap: 1600 mm Suport, feeds the normal: -20 longitudinal feed range: 0,19-5,0 mm/Rev. -20 transverse feed range: 0,095-2.5 mm/Rev. -20 feed on the upper tray of the range: 0,095-2.5 mm/Rev. Suport, feeds 8-20 longitudinal feed range: 1.5-40 mm/Rev. -20 transverse feed range: 0.75-20.0 mm/Rev. -20 feed on the upper tray of the range: 0.75-20.0 mm/Rev. Suport, feeds minute:-20 longitudinal feed range: 12-320 mm/Rev. -20 transverse feed range: 6-160 mm/Rev. -20 feed on the upper tray with a range: 6-160 mm/Rev. Suport, feeds to thread (the main screws. train.):-35 thread jumping metrycz. about t. : 1-50 mm -jumping 35 inch threads range: 24-1/2 scroll/inch Suport, feeds for threading on the top tray:-25 thread jumping metrycz. about t. 0.25-7 mm -jumping 35 inch threads/inch scroll: the scroll 28-3/inch Feed rates associated to the rolling cones of gradients creating: 1:1.5 (d) 1:1000 -rapid traverse: 4000 mm/min. Konik: -barrel diameter: 200 mm -stroke sleeve: 600 mm -slot in the spindle sto?. meter.: # 80 -radial offset: +-30 mm Glasses: -diameter adjustment range normal: 200-600, 200-500 equipment, okular, 300-800 mm -adjustment range of diameters okular special equipment: 30-300, 50-400, 200-500 mm Pó?okular: -adjustment range pó?okulara diameter: 50-250 mm Drive:-main motor power: 40 kW -the engine speed: 750 RPM. -rapid feed motor power: 2.2 kW -the engine speed rapid feed rate: 3000 rpm. -oil pump motor power: 0.37 kW -engine oil pump: 1500 rpm. -performance oil pump: 25 l/min. Sizes and weights: -distance between centres: 3000-15000 mm -weight for length 6000 mm and 1 support: ok. 30000 kg -extra weight Prov difference length 1000 mm: 1200 kg -the weight of the additional bracket: 1500 kg

Milling machine MICROCUT HBM 4


CNC FANUC 32i MB 2008 power 17.9 Kw table 1200 x 1500 mm Table rotation 360 capacity 5000 kg stroke x 2200 mm stroke y 1600 mm stroke z 1600 mm stroke w 550 mm spindle taper ISO 50 diam. Spindle 110 mm spindle speed 35/3000 rpm Warehouse 60 tools

Eccentric Presses SMERAL TRNAVA LEN 40 C


Eccentric press SMERAL PRESSES OFFERING TRNAVA LEN 40 C produced in 1985 year in Czechoslovakia. Press-specific data LEN 40 c: -pressure: 40 tons -table surface: 660 x 530 mm -the surface of the slider: 400 x 250 mm -outreach: 265 mm -the distance between the table and the slider: 295 mm -the size of the adjustment between the table and the slider: 80 mm -the number of jumps the slider with continuous movement: 70 or the 142 ppm -number of jumping individual: 50/min -adjustable pitch slider: 8-95 mm -pneumatic coupling, min. air pressure: 0.4 MPa -motor power: 3/4 kW -overall dimensions (l x w x h): 1585 x 1245 x 2370 mm -weight: 4500 kg

Universal Lathes Up To 800 Mm Diameter PONAR REMO KEPNO TUX 63 B


Lathe PONAR REMO K?PNO TUX 63 B was built in the machine tool Factory PONAR REMO K?PNO in 2006 year. Technical data of lathe TUX 63B: -maximum turning diameter over bed: 630 mm -maximum turning diameter over cross slide: 380 mm -maximum turning length in between centers: 1500 mm -slot in the spindle, the cone metric: 80 mm -spindle: 71.5 mm -the width of the bed: 433 mm -slot in the tailstock sleeve Morse: 5 tailstock sleeve travel mm 180:- tailstock sleeve diameter: 90 mm -spindle speed range: 18-1800 rpm. -the number of spindle speeds: 21 -the number of feeds in the entire range of spindle speeds: 42 -feed range longitudinal: 0.08-3,26 mm/Rev. -the scope of the transverse feed rate: 0.04-1.63 mm/Rev. -the number of metric: 42 -range of metric: 1-88 mm -number of modular threads: 42 -range of modular thread: 1-88 II mm -number of inch threads: 42 -range of inch threads: 1-88 zw/1 " -the number of threads DP: 42 -range of DP threads: 1-88 DP -fast movement of bottom bracket: 4.2 m/min -life on the spindle torque: 980 Nm -maximum torque on the spindle (5 minutes): 1960 Nm jump lead screw: 6 mm -screw the cross slide stroke: 5 mm -the maximum cross section of the CAP the knife: 32 x 20 mm -speed synchronous motor: 750/1500 rpm. -main drive motor power: 3,9/7.2 kW -overall dimensions: 3130 x 1140 x 1285 mm -weight of the machine: 3200 kg

Automatic hydraulic press PAWN 100 G


Hydraulic automatic PAWN 100 G was built in 1991 by HYDOMAT-Warsaw, Poland. Technical parameters of the press PAWN 100 G: -nominal pressure: 100 t Jump Mobile disc: 0-70 mm -number of jumps the disc movement.: 10-60 l/min. -maximum operating pressure: 22.5 MPa -maximum pressure: 4 MPa -installed power: 29 kW -the weight of the press: 5930 kg

gabion mesh production line HEBEI FAKTORY 60X80 / 4300


Line for manufacturing of grid gabionowej HEBEI ANPING WIRE MESH MACHINE FACTORY 60 x 80/4300 was built in the year 2013. Machine for manufacturing of grid gabionowej, hexagonalnej with the following parameters: -manufacturer: Hebei Anping Wire Mesh Machine Factory (China)-the size of the meshes: 60 x 80 mm -maximum width of mesh produced: 4300 mm -wire diameter: 2.0-2.8 mm -capacity: up to 2.5 mb/min. -weight: 18 tons -engine power: 22 kW

FORNO PER FUSIONE Marconi


MELTING FURNACE MARCONI 14 RR MODEL YEAR 1999 Marconi BRAND Melting furnace Marconi; automatic metal loader hydraulic controls; capacity 1400 kg; Double burner; wait 1 and 1; 2 wells; side discharge and cleaning; gas powered for more information contact us at + 39 030 725026 machinery and vision from Monday to Friday from 8:30 to 13:00 and from 14:00 to 19:00

PRESSA PER PRESSOFUSIONE Italpresse


ISOLA CASTING ITALPRESSE BRAND Italpresse The MODEL 300 YEAR 1974 Horizontal press for die casting with charger and Lubricator Datasheet Closing power 350 Ton Max power injection 40 Ton Central extraction power 18 Ton Max height 750 mm moulds Minimum height 250 mm moulds Stroke 130 mm 500 mm stroke central extraction platen 960x960 plans size mm Distance within the columns 580x580 mm motor power 18.5 Kw Printable area max 400 cm2 metal pressure Kg/cm2 845 total weight of 14.8 Tons press overall dimensions 1450x6100x1900 h mm For more information contact us at + 39 030 725026 machinery and vision from Monday to Friday from 8:30 to 13:00 and from 14:00 to 19:00

BYSTRONIC bystar


Bystronic Bystar 4025 12 meter 6kw Manufacture: Bystronic Type: Bystronic Bystar 4025 12 meter 6kw YOM 2007 Laser on Hours 30,540 Laser working hours 15,809 Sheet Size XYZ 4000mm x 2500 x 150 mm Thickness of Cutting Material Mild Steel - 25MM Stainless Steel -25MM Aluminium - 15MM Power Output 6000 Watts Cutting Heads 7.5” & 5” Comes with Auto change tables, extractor and chiller. Price: Machine Price Ex Works 200.000 euros EX WORKS GERMANY

MILLING MACHINE FIL FIL FSM 300


MILLING MACHINE FIL FSM 300 Category: Milling Machine Type: mobile upright Brand: FIL Model: FSM 300 Capacity: 3500x1000x1250 mm Year built: 2008 FIELD WORK: Longitudinal (x): 3000 mm, vertical (y): 1250 mm Transverse ram (z): 1000 mm CNC CNC: Heidenhain TNC430 SPINDLE Spindle power: 30 kW Rotation speed: 10-3000 Rpm Taper: ISO50 FEEDS: Rapid x: 25 m / min, Rapid y: 25 m / min, Rapid z: 25 m / min ATC Locations: 24 Position: on mast PLAN OF ANCHORAGE Size (lxwxh): 3500x1000 mm Capacity: 15,000 Kg / m HEAD 1 Type: OVER Spindle taper: ISO50 Axle: 180 ° Max speed: 3000 rpm Machine weight: 24700 kg Fridge: yes

Boring Mills STANKOIMPORT 2L614


Boring machine STANKOIMPORT 2L614 produced in 1978. The machine is equipped with measuring, and has upgraded partly electronic. Technical data of boring STANKOIMPORT 2 l 614: -spindle diameter: 80 mm -table dimensions: 800 x 1000 mm -the maximum workpiece weight: 1000 kg -spindle speed: 20-1600 min -engine power: 4.5/6.7 kW -dimensions of the machine: ok. 4300 x 2200 x 2800 mm -weight: 7000 kg
Find used machinery dealers in your country