powder used for sale

Apex model 343 Y cone blender polished stainless steel 25ltr lab/pilot scale development blender. Stop/start; variable speed; timer. Hinged safety guard, mobile on castors, single phase.

Gardner 800l ribbon blender, single shaft, stainless internals, swing top lid, discharge chute, 3Ph

Manufacturer Zanchetta Model Rotolab Mixer Made in 2003.

SE-120 SIMPLEX extruders Capacity: up to 100 Kg/h Made of stainless steel Screw diameter = 120mm. Installed motor power: 2.2 kW. Heated extrusion cone Cooling circuit for auger, Electrical cabinet with buttons and speed variator Safety grid Maximum output diameter: Ø 75 mm Electricity: 400V, 50 Hertz, three phases Weight: 320kgs. Dimensions: 1500 x 600 x 800mm (h). Year 2019

Compressed air supply: 7bar, connected load: 5kW, length: 1650mm, width: 1400mm, height: 1700mm, weight: 2.3t, including documentation and accessories.

Application: Wires and similar metals Location: Schwerte Without winding technology Wires were coated black with the system.

Press capacity: max. 45 t Pull force: max. 45 t Counter force in pressing position: max. 17 t Stroke of the punch: 175 mm Filling height: max. 140 mm Deduction: max. 85 mm Compression distance: max. 55 mm Top pressing: max. 15 mm Stroke rate: 9 – 26 min.-1 Motor: 7,4 kW Approx: 3000x1200x1800 mm Net weight: about 6000 kg

Mechanical press Dorst TPA5 T completely refurbished

Mechanical Dorst TPA15/3 T completely refurbished

Mechanical Press Dorst TPA50/4S

Mechanical Press Dorst TPA140

Used mechanical Dorst TPA 6 completely refurbished

Mechanical DORST TPA12/3 completely refurbished

Dorst tonnage press reader

Used sticks packaging machine, new 2004, 2007, 2007. Capacity 180 pcs/min.

The machine was dismantled at the end of 2021 and has been stored in a hall ever since. The packer is complete with control cabinet and its own compressor. The wiring to the control cabinet was documented during dismantling. Instruction manual on German is also available.

Functional axial mixer with timer. just under 2 EUR pallet dimensions.

Inv. Num. : 6900 Type:- Producer: Gema ITW Generated:- Parameters: Weight: 1200 kg The center consists of the following parts: Manipulator 2x (working height 2100mm) Automatic guns 6x Peristatic pump under cyclone Control for 6 automatic guns Switchboard

ELEKTRISCHER KASTENOFEN Verwendungszweck : Pulverhärtung Maximale Temperatur : 220ºC Das Heizsystem des Ofens ist als Zwangskonvektionssystem ausgelegt. Es basiert auf dem Prinzip, dass die Luft des Ofenvolumens mit Hilfe eines Umwälzgebläses in den Ofen gepumpt wird und die Ofentemperatur durch die Wärmeübertragung der Luft, die durch die Heizeinheit strömt, erhöht wird. Die Wände des Ofens und der Heizeinheit bestehen aus modularen Blechen und hochdichten Isolierplatten. Luftverteilungskanäle mit regulierbaren Klappen im Inneren des Ofens sorgen dafür, dass die Ofentemperatur an jedem Punkt gleichmäßig ist. Die Temperaturregelung ist digital und ermöglicht eine präzise Einstellung der Ofentemperatur. Die Heizeinheit wird seitlich, hinten oder oben am Ofen angebracht und besteht aus einer isolierten Heizkammer, einer Heizzelle mit Widerstand im Inneren, eine ...

PULVERBESCHICHTUNGSANLAGE, TRANSFER-TYP Aushärteofen - Gas, Diesel oder elektrische Quelle Pulverbeschichtungskabine - Zyklontyp oder mit Patronenfilter Pulverbeschichtungsanlage - manuelles oder automatisches System Hängefördersystem - Raupenfahrwerke und Rumpfform Wir bieten die besten technischen Lösungen und wettbewerbsfähige Preise Deutschsprachiger Ansprechpartner in Deutschland Kontaktieren Sie uns für weitere Informationen und Angebote VOGAMAKINA Ltd. abcs://vogamachine.com info@vogamakina

S/S Mettler Toledo bucket filler Bucket filling method: Vibration Equipped with: -Mettler Toledo Controller -Hydraulic Bin Empty System

DOUBLE Z MIXER (double Z mixer) is a powerful mixer for mixing high viscosity products. It is used by pharmaceutical companies, food companies (energy bars, protein bars, chewing gum), in the chemical (silicone rubber, sealant, adhesives, pigments, etc.) or construction industries. Capacity: 50 liters. All parts in contact with the mixture are in stainless steel for food. CE certified for food use High power motor: 5 KW. External heating jacket (electric). Electric tank overturning (it can be stopped at any point on the way). Used very little, in perfect condition. Ready to use.

Jolly 2500 Liters type D mixer in AISI 304 (Mot. 20 HP) complete with electrical panel wired with IP-65 protection degree, two lifting jacks, balanced cover with counterweight, Kevlar reinforced belt drive, motor/system 20 HP 2-speed electric motor, removable hopper cover, accident-prevention grids in compliance with UNI 294 et seq., emergency stop button, electro-pneumatic unloading, elliptical loading hopper with external edge, captive screws on fixed guards, loading hopper polishing, tank made with sheet metal with BA finish and mirror polishing of the convex rear part, oversized loading hopper, lower compressed air seal with PTFE gasket, upper compressed air seal with PTFE gasket, compressed air regulation unit.

ELEKTRISCHER KASTENOFEN Verwendungszweck : Pulverhärtung Maximale Temperatur : 220ºC Das Heizsystem des Ofens ist als Zwangskonvektionssystem ausgelegt. Es basiert auf dem Prinzip, dass die Luft des Ofenvolumens mit Hilfe eines Umwälzgebläses in den Ofen gepumpt wird und die Ofentemperatur durch die Wärmeübertragung der Luft, die durch die Heizeinheit strömt, erhöht wird. Die Wände des Ofens und der Heizeinheit bestehen aus modularen Blechen und hochdichten Isolierplatten. Luftverteilungskanäle mit regulierbaren Klappen im Inneren des Ofens sorgen dafür, dass die Ofentemperatur an jedem Punkt gleichmäßig ist. Die Temperaturregelung ist digital und ermöglicht eine präzise Einstellung der Ofentemperatur. Die Heizeinheit wird seitlich, hinten oder oben am Ofen angebracht und besteht aus einer isolierten Heizkammer, einer Heizzelle mit Widerstand im Inneren, eine ...

DORST TPA 15 mechanical press

General SKU334U821 LocationBarneveld MakeKek Kemutec TypeCM 220 No.B 32844 Year of construction11-2006 Main Features MaterialStainless steel Motor4 KW Width220 mm Specified Features - Sieve granulator Granulating sievecheck Conical granulating sievecheck Rotor sizesDia: 220x150mm Sieve sizesDia: 220x180 Sieve perforationDia:3mm (3x) InletDia:145mm Motor4kW, 400Volt, 1425rpm (ex) Speed1425 rpm With extra sievescheck MaterialStainless steel 1.4306 (304L) Information Total height0,75m Weight200kg Floor space1,1x0,53m ATEX compatiblecheck Extra SpecificationsThe product bucket has a diameter of 300 mm and a height of 300 mm. Bucket volume: ±20 liters. Powdered foodsSieve granulatorsKek KemutecIndustries > Food & Feed > Powdered foodsSieves > Sieve granulatorsBrand > Kek Kemutec What you can expect from Foeth: -- Machine is in working condition -- At a reduced pri ...

Press capacity: max. 60 t Stroke of the punch: 125 mm Filling height: max. 110 mm Motor: 15 kW Approx: 1650x1801x3390 mm Net weight: 5800 kg

The biconical type mixer makes a homogeneous mixture of solids. The mixing process is a common operation in manufacturing for the health, food, chemical, cosmetics, detergents, fertilizers and plastics industries. Some examples are pharmaceutical granules, flour semolina, seeds, starch, coffee beans and ground coffee, cocoa, chocolate flakes or granules, powdered milk, baby food, preparations for making dehydrated creams and soups, foliar waxes, granulated detergents, soap flakes, artificial fertilizers, powdered plastics or shredded, plastic pellets and fiberglass, etc. The Bicono mixer for solids has a rotating biconic drum that rotates at low speed, making the product slide smoothly along its smooth interior walls, making the product unforced. Characteristics: Repetitive, reproducible and scalable mixes. Low maintenance mixer. Extreme ease of cleaning. Total emptying of  ...

Mixer with double rotation internal auger (conical-concentric). The BONFIGLIOLI gearmotor unit that turns the helical reel consists of: - Three-phase asynchronous motor (IP-55 protection degree), with nominal electrical power Pn = 0.37kW, and absorbed current (at the frequency of 50Hz which is in force in Europe), equal to: - In =1.85 Ampere if powered at 230Vac line voltage - In = 1.07A, if powered at the star voltage of 400Vac (as in the LdF factory) If, for example, it were used in the USA, where the frequency is equal to 60Hz and the power supply voltage is 460Vac, the power that the motor can develop is greater (Pn=0.45kW) and the absorbed current is In=1, 09Ampere.

STEPHAN vacutherm stainless steel machine with emulsion pump 450 liter capacity Description The STEPHAN Vacutherm® system is a compact process unit. It has been designed primarily for the production of prepared food. Several process steps are combined in one machine. Liquid and solid ingredient processing as well as particle incorporation can be performed. The STEPHAN Vacutherm® system has been developed and optimized in collaboration with manufacturers of prepared foods. Precisely controlled processes result in high product quality and repeatability. The highly flexible system produces a wide range of food products. The compact system combines several process steps in a single machine. These are mixing, dispersing, downsizing, heating, cooling, pasteurizing, deaerating, and emulsifying. Liquid and solid ingredient processing as well as particle incorporation can be performed. In add ...

WAB Turbula shaker-mixer is used for the homogeneous mixing of powdery substances with differing specific weights and particle sizes. The product is mixed in its own closed container. It is also possible to mix wet and dry components or different wet components. The production process is hygienic and dust-free, making the TURBULA easy to clean. The exceptional efficiency of the TURBULA shaker-mixer comes from the use of rotation, translation, and inversion according to the Schatz geometric theory. The mixing container is set into three-dimensional movement that exposes the product to always changing, rhythmically pulsing motion. The results fulfill the highest requirements and are achieved in a minimum of time. The mixing basket can hold any form of container, from test tubes up to containers having volumes up to 2 liters. Containers are held tightly by twisted rubber rings. By adj ...

Inv. Num. : 7289 Type: Z-4645 Producer: Surfin Generated:- Parameters: In good technical condition.

Process plant Manufacturer: Becomix Type RW 125 CD The machine went into operation in December 2007, built in 2006, very good condition, only run in the laboratory Capacity usable volume 125 l, pharmaceutical version Product room vacuum- and pressure-resistant -1/+2 bar, operating temperature 133 °C Flameproof boiler room 4 bar, operating temperature 165 °C Wiper agitator, homogenizer with gap adjustment (Powderjet), water-cooled motor Becomix consisting of: 1x RW 125 CD homogenizer including Cip/SIP 1x energy frame with all valves, vacuum pump, steam-heated 1x control cabinet with S 7 control and control panel with Promas CS 1x control cabinet with frequency converters Documents: technical documentation in French, Promas manual, various CDs Documents with FAT, IQ, OQ

for powdering in truffle production Dimensions 620 x 1000 x 1050 mm Capacity 25 kg - 35 kg depending on the product Electricity 220 V, single phase, 16A

AUTOMATISCHE PULVERBESCHICHTUNGSANLAGE Einbrennofen - Gas-, Diesel- oder Elektroantrieb Pulverbeschichtungskabine - Monofarb- oder Zyklontyp - einfacher Farbwechsel Pulverbeschichtungsanlage - manuelles oder automatisches System - Wagner, Gema oder türkisch lokal Hängebahnsystem - Monorail oder Power&free Vorbehandlungslinie - chemischer Prozess je nach Produkt und Qualitätserwartung Wir bieten die beste technische Lösung mit bester Qualität und wettbewerbsfähigem Preis. Deutschsprachiger Area Manager in Deutschland verfügbar. Kontaktieren Sie uns für weitere Informationen und Angebote. VOGAMAKINA Ltd. infovogamakinacom ---------------------------------------------------------------------- --------- AUTOMATIC POWDER COATING PLANT Curing oven - gas, diesel or electric source Powder coating booth - Mono-color or cyclone type - easy color change  ...

AUTOMATISCHE PULVERBESCHICHTUNGSANLAGE Einbrennofen - Gas-, Diesel- oder Elektroantrieb Pulverbeschichtungskabine - Monofarb- oder Zyklontyp - einfacher Farbwechsel Pulverbeschichtungsanlage - manuelles oder automatisches System - Wagner, Gema oder türkisch lokal Hängebahnsystem - Monorail oder Power&free Vorbehandlungslinie - chemischer Prozess je nach Produkt und Qualitätserwartung Wir bieten die beste technische Lösung mit bester Qualität und wettbewerbsfähigem Preis. Deutschsprachiger Area Manager in Deutschland verfügbar. Kontaktieren Sie uns für weitere Informationen und Angebote. VOGAMAKINA Ltd. infovogamakinacom ---------------------------------------------------------------------- --------- AUTOMATIC POWDER COATING PLANT Curing oven - gas, diesel or electric source Powder coating booth - Mono-color or cyclone type - easy color change  ...

General SKU422U1331 LocationBarneveld MakeDrais Mannheim TypeTM 1000 E No.56216 Year of construction2001 Main Features MaterialStainless steel Volume1000 Ltr. Motor30 KW Specified Features - Powder turbo mixer Powder turbo mixercheck Capacity1000 Ltr. Trough sizesDia. 940x1500 mm InletDia. 250 mm Inspection hatch450x450 mm OutletDia. 300 mm Max. temperature50°C With adjustable packing glandscheck Motor30kW, 400/690Volt, 1480rpm. With frequency controllercheck Speed mixing shaft20-120 rpm. MaterialStainless steel 1.4571 (316Ti) Information With switchgearcheck (as is) Sizes switchgear1,2x0,5x2,3 m Total height2,7m Weight6100 kg Floorspace4,3x1,85 mMinerals & inorganicNew arrivalsOther feedPowder turbo mixersPowdered foodsFeed additivesDraisIndustries > Chemical > Minerals & inorganicNew arrivalsIndustries > Food & Feed > Other feedMixers > Powder turbo mixer ...

General SKU104W505 LocationBarneveld MakeMorton Machines TypeFKM-900D No.M24052 Year of construction12/´94 Pressure Working pressure jacket5.5 Bar Main Features MaterialStainless steel Volume900 Ltr. Motor75 KW Specified Features - Powder turbo mixer MaterialStainless steel 1.4401 (316) Powder turbo mixer(1x) Capacity900 Ltr Trough sizesdia. 790x1840mm Top connectionsdia. 150mm + dia. 250mm + dia. 345mm Inspection hatch540x400mm (1x) Outlet160x120mm (2x) + dia. 100mm With jacketcheck Max. temperature162 Degr. C. With adjustable packing glandscheck Motor75,0 KW, 380 Volt (Ex) Speed mixing shaft± 115 Rpm Information ATEX compatiblecheck Extra Specifications-- RECONDITIONED -- ReconditionedPowder turbo mixersMortonReconditionedMixers > Powder turbo mixersBrand > Morton What you can expect from Foeth: -- Machine is in working condition -- At a reduced price com ...

General SKU072Y445 LocationBarneveld MakeDrais TypeT-630 No.45988 Year of construction1973 Main Features MaterialMild steel Volume630 Ltr. Motor24 KW Specified Features - Powder turbo mixer MaterialMild steel Powder turbo mixer(1x) T-armscheck Capacity630 Ltr Trough sizesdia. 900x1000mm Top connectionsdia. 195mm + 2x dia. 70mm Inspection hatch400x600mm (top side) Outletdia. 200mm With adjustable packing glandscheck Motor16,0/24,0 KW, 380 Volt (Ex) Speed mixing shaft62,5/125 Rpm Information Floorspace3,1x1,7 M Total height2,0 M Weight2100 KG ATEX compatiblecheck Extra Specifications-- RECONDITIONED -- ReconditionedPowder turbo mixersDraisReconditionedMixers > Powder turbo mixersBrand > Drais What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welc ...

Reconditioned powder scatter coating and laminating line for thermoplastic powders. Working width 2 x 000 mm. New powder-spreading system for coating and lamination by means of thermoplastic powders. Working width 2 x 000 mm.

General SKU300P672 LocationBarneveld MakeLoedige TypeFKM 1600 No.10065 Year of construction1981 Main Features MaterialStainless steel Volume1600 Ltr. Motor22 KW Specified Features - Powder turbo mixer Capacity1600 Ltr Trough sizes1100x1700mm Inletdia. 350mm Outlet240x180mm With adjustable packing glandscheck Motor22 kW 380 Volt Speed mixing shaft116 rpm With lump breaker2x Motor5.5 kW 380 Volt Speed lumpbreaker2885 rpm MaterialStainless steel Information Mounted on framecheck Total height3,5 M Weight3750 Kg Floorspace3,7x1,8 M Extra Specifications- Reconditioned -ReconditionedPowder turbo mixersLoedigeReconditionedMixers > Powder turbo mixersBrand > Loedige What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barn ...

General SKU354U1434 LocationBarneveld MakeLödige TypeM5R No.10.868 Year of construction1984 Pressure Working pressure jacket5 Bar Main Features MaterialStainless steel Volume5 Ltr. Motor0.75 KW Specified Features - Powder turbo mixer Lödige mixercheck Useful capacity5 Ltr. Trough sizesdia. 200x170 mm Inlet80x140 mm Outlet80x140 mm With jacketcheck (0,6 Ltr.) Max. temperaturemax. 158 °C Motor0,75 kW With variable speed drivecheck Speed mixing shaft0-350 rpm MaterialStainless steel Information With switchcheck Weight190 kg Floorspace0,82x0,42 m Total height0,49 mMinerals & inorganicPlastic & polymersDyes & pigmentsOther feedRubberOther chemicalPowder turbo mixersSugarCosmeticsPowdered foodsFeed additivesLoedigeIndustries > Chemical > Minerals & inorganicIndustries > Chemical > Plastic & polymersIndustries > Chemical > Dyes & pigmentsIndustries > Food & Feed ...

General SKU354U880 LocationBarneveld MakeLödige TypeM5R No.11.595 Year of construction1987 Pressure Working pressure jacket5 Bar Main Features MaterialStainless steel Volume5 Ltr. Motor0.75 KW Specified Features - Powder turbo mixer MaterialStainless steel Lödige mixercheck Useful capacity5 Ltr. Trough sizesdia. 200x170 mm Inlet80x140 mm Outlet80x140 mm With jacketcheck (0,6 Ltr.) Max. temperaturemax. 158 °C Motor0,75 kW With variable speed drivecheck Speed mixing shaft0-350 rpm Information With switchcheck Weight130 kg Floorspace0,82x0,42 m Total height0,49 mMinerals & inorganicPlastic & polymersDyes & pigmentsOther feedAnimal feedOther chemicalPowder turbo mixersSugarCosmeticsPowdered foodsLoedigeIndustries > Chemical > Minerals & inorganicIndustries > Chemical > Plastic & polymersIndustries > Chemical > Dyes & pigmentsIndustries > Food & Feed > Other f ...

Guttridge fully automatic powder filling line Consists of Easyflo screw elevator conveyor with vibratory sieve that directly fills a 50Kg stainless auger filler, 300g - 4000g weight range, suitable for filling pouches / tubs / cans, brand new touch screen plc controls, height adjustable frame, with infeed conveyor, 1Ph

This KOMAGE Mechanical Powder Press was manufactured in the year 1998 in Germany by the Komage Gellner Maschinenfabrik GmbH. It has a pressing force of 50 kN. The machine is in a good condition for its age as serviced on an annual basis directly by Komage.

Stock # U2423-1 Used stainless steel conical nauta type powder mixer by Pharming type HV 1000 (CZ). Cone has diameter 1550 mm x height 2200 mm. Total volume of tank about 1700 l, working volume up to 1000 l. Total height 324 cm. Standard mixing screw is top driven by el. motor 3 kW, 970 rpm, 230-400 V, 50 hz, and supported by bottom pintle bearing. Arm rotation - 2 rpm. Screw rotation - 60 rpm. Discharge via bottom rotary slide outlet valve, operated manually. Mixer is mounted on 3 lugs with carbon steel supports. Included technical documentation. Shipping dimensions: length 330 cm x diameter 170 cm x weight approx 1000 kg. Machine had been working in food industry.

Stock# U2423-2 Used stainless steel conical nauta type powder mixer by Pharming type HV 600 (CZ). Cone has diameter 1440 mm x height 1855 mm. Total volume of tank about 1300 l, working volume up to 600 l. Total height 2770 mm. Standard mixing screw is top driven by el. motor 3 kW, 965 rpm, 230-400 V, 50 hz, and supported by bottom pintle bearing. Arm rotation - 2 rpm. Screw rotation - 60 rpm. Discharge via bottom rotary slide outlet valve, operated manually. Mixer is mounted on 3 lugs with carbon steel supports. Included technical documentation. Shipping dimensions: length 277 cm x diameter 180 cm x weight 600 kg. Machine had been working in food industry.

Year of construction 2001 Dry Pollinator Grafix Powder pollinators for sheetfed offset suitable for Heidelberg SM / CD 102 Delivery date: immediately Price on request. We deliver and install worldwide!

Used line for packing powdered products Chronos. Powdered products are packed in four-layer paper bags with a polyethylene insert of 25 kg net or BIG-BAG containers with a capacity of max 1000 kg. Packing in 25 kg bags takes place on an automatic Chronos packing machine. The packing machine automatically weighs, seals the polyethylene bag and seals the paper bag.