powder plant used for sale

The continuous system consists of the following components: Chemical pre-treatment by spraying Dryer Powder coating system Powder curing furnace Conveyor technology (cycle method) Electrical control Overall length: 30,000 mm Overall depth: 4,300 mm Width: 6,500 mm Workpiece weight (max.): 100 kg Temperature: 220 °C Heat output: 80,000 W Workpiece width (max.): 800 mm Workpiece height (max.): 1,200 mm Workpiece length (max.): 2,500 mm Insulating material: Mineral wool 75 kg/m³ Insulating thickness: 150 mm

Powder curing furnaces in various sizes, gas or electric 1 Inner dimension length 1500 - 6,500 [mm] 2 Inner dimensions width 1700 - 1,900 [mm] 3 Inner dimensions height 2,000 [mm] 4 Steel profile substructure 5 walls Galvanized sheets 1mm on both sides, RAL on the outside 6 Insulation walls, ceiling rock wool 150mm 75Kg/m² 7 Floor furnace gets 2 entry rails for tray trolleys (optionally with conveyor technology) 8 Temperature 220°C 9 fans 1 - 2 pcs. 2600 - 15,000 [m³/h] 10 electric motors 1 - 2 pcs 1.1 - 6 [kW] , 1450 [rpm], 3 F, 50 [Hz] 11 Thermal power 14 - 99 [kW] 12 hinged or sliding doors on one or both sides 2 - 4 pcs insulated with rock wool 150mm 75Kg/m² Heating Indirectly via Thermoblock 13 Thermoblock Stainless Steel INOX AISI 316 Heating Electric or Gas Heat-Resistant Fans and Heat-Resistant Bearings, Thermoblock Has Overheating Protection

Powder coating plant (complete) with 3 zones of chemical pre-treatment and Hybird ovens (dryer and curing oven) Gas and electricity (gas or electricity also possible) The facility consists of: Chemical pre-treatment with reverse osmosis system Dryer with hybrid thermoblock Walk-in coating booth with extraction unit KG PSW 8000 Powder curing furnace with hybrid thermoblock Conveyor system with transverse displacement, manual Electric control unit Specification of production Type of workpieces varies Material of the workpieces Steel (other metals or multimetal possible on request) Maximum weight of the load carrier 200 kg System type: Manual conveyor Dimensions of the maximum workpiece in the curing furnace Max. length 3000 mm Max. width 1500 mm Max. height 1500 mm Dimensions of maximum workpiece in chemical pretreatment Max. length 3000 mm Max. width 800  ...

COMPONENTS OF THE SYSTEM Preheating oven Powder coating booth Fluidized Bed Powder Coating Lifting system Automatic Transport System – Conveyor Belt C-80 Electrical control and installation Transport and assembly Fluidized Bed Powder Coating Booth The powder is fluidized in the fluidized bed vessel when the part is preheated and positioned over the fluidized bed container. The lifting system lifts the fluidized bed tank and the part is coated. After the coating process is completed, the fluidized bed is lowered again and an air blowing system blows off the excess powder on the part. The process can be carried out fully automatically. The cab's system is designed for powder coating with powder recovery and consists of a powder chamber for powder application, a monocyclone and a post-filter for extracting powder residues Chamber dimensions Length: 2000 mm Width 1 ...

Dimensions: Length: 7400 mm Width: 4000 mm Height: 3236 mm Extraction capacity: Q = 18000 m³/h P = 15 kW The cabin has a suction machine with filters to suck the powder from the cabin floor. The powder booth is set up in a pit to lower the entire height of the painting line. Manual doors are installed to enter the workpieces into the cabin. The overspray is extracted during powder coating via the floor. On the floor there is a grate for walking on and under the grate there is a second flat floor with automatic self-cleaning system, connected by air ducts with post-filter. A self-cleaning system automatically blows the powder from the bottom to the post-filter (suction machine) and consists of

Oven, doors single-sided, electric Dimensions: 3,500 x 1,700 x 2,000 [mm] (alternatively width 1900mm instead of 1700mm) Insulation: 150 mm (mineral wool 75 kg/m³) Temperature: max. 220°C Circulating air: Q = 7500 m³/h P = 3 kW Heat output: 54 kW Auxiliary heating: electrically indirect via thermoblock

Chemical pre-treatment 3 zones for powder coating with spray ring (automatic) and manual Dimensions: Length: 8000 mm Width: 4500 mm Height: 3500 mm Max. workpiece dimensions (automatic): Length: 6500 mm Width: 1000 mm Height: 2300 mm Max. workpiece dimensions (manual): Length: 6500 mm Width: 2500 mm Height: 2300 mm Tanks are positioned at ground level with a sloping floor. Tank No.1 is thermally insulated and is heated by electric heaters. Achievement: 27 kW. Volume of each tank = 1.00 m³. For degreasing (1st tank), a medium pressure pump is used to operate the 1st spray system. The rinsing phases are also operated by a pump with medium pressure via the 2nd spray system. On the bottom i ...

Oven, doors single-sided, gas Dimensions: 4,500 x 1,700 x 2,000 [mm] (alternatively width 1900mm instead of 1700mm) Insulation: 150 mm (mineral wool 75 kg/m³) Temperature: max. 220°C Recirculating air: Q = 12000 m³/h P = 2 x 2.2 kW Heat output: 69 kW Auxiliary heating: Gas indirectly via thermoblock

Chemical pre-treatment for powder coating (3 zones) 1 Dimensions of the cabin length 3900 mm Width 1600 mm Height 2500 mm 2 dimensions of the pre-treatment complete length 4000 mm Width 3000 mm Height 4000 mm 3 Passage opening width 1000 mm Height 1700 mm The chemical pretreatment for the use of nanotechnology or phosphating consists of 3 stages in 1 spray chamber. Chemical spray pretreatment works in time and this means that the workpieces are manually pushed into the chamber. After closing the doors, the passage starts and the pumps start spraying. Each pump has different spray times. After the spraying process is finished, there is an alarm indicating that the door can be opened and the workpiece can be pulled out. All pre-treatment functions a ...

Oven, doors single-sided, electric Dimensions: 3,000 x 1,700 x 2,000 [mm] (alternatively width 1900mm instead of 1700mm) Insulation: 150 mm (mineral wool 75 kg/m³) Temperature: max. 220°C Circulating air: Q = 7500 m³/h P = 3 kW Heat output: 46 kW Auxiliary heating: electrically indirect via thermoblock

The curing furnace consists of a tunnel furnace in which the workpieces are baked after coating. The furnace is a straight tunnel furnace. The frame is made of steel with insulated panels. The mineral wool insulation becomes 150 mm thick in a special construction to prevent thermal bridges 1 Inner dimension length 7,000 mm Inner dimensions width 1,000 mm Inner dimensions height 2,500 mm 2 Outer dimensions incl. thermoblock, length 7,200 mm Outer dimensions incl. thermoblock, width 1,300/2,300 mm External dimensions incl. thermoblock, height 2,800 mm 3 substructure 1 set of steel profiles 80 x 80 and 40 x 80 mm 4 walls 1 set of double-sided galvanized sheets 1mm, outside RAL 5010 5 Insulation 1 set of rock wool 150mm 75 Kg/m³ 6 Ventilation system 1 set of galvanized steel sheet 7 Temperature max. 220°C 8 fans 1 pc. 7,500 m³/h 9 electric motors 1 pc  ...

Oven, doors single-sided, electric Dimensions: 3,000 x 1,700 x 2,000 [mm] (alternatively width 1900mm instead of 1700mm) Insulation: 150 mm (mineral wool 75 kg/m³) Temperature: max. 220°C Circulating air: Q = 7500 m³/h P = 3 kW Heat output: 46 kW Auxiliary heating: electrically indirect via thermoblock

Open Powder Spray Stand Dimensions: 2500 x 2250 x 2700 [mm] Extraction capacity: Q = 8000 m³/h P = 5.5 kW Filter: 1 stage: Filter cartridges 4 pieces à Ø 325 x 1000 [mm] 2nd stage: Pocket filter (absolute filter for fine dust) Note: The overspray during powdering is absorbed by the suction unit. The powder spray stand is delivered on rollers and is therefore mobile

Dimensions: Length: 8000 mm Width: 4500 mm Height: 3500 mm Extraction capacity: Q = 18000 m³ P = 15 kW The cab has 2 doors on one side for the insertion/outlet of the workpieces. The components are pushed into the cabin for coating via the overhead transport system. Walls, ceiling and doors are made of panels. The filters positioned on the roof absorb dust and other particles from the outside, thus ensuring clean ambient air in the cabin. The overspray during powdering in the cabin is absorbed by the extraction unit

Alloy powder CASTOLIN-EUTECTIC EUTALLOY 12494 RC35-40 Packaging unit: 3.0 kg New ! Dimension ( packaging ): 85 x 85 x 230 mm

Screw packers for valve bags Stainless steel Suitable for food and pet food Revised and Function Tested Incl. net scale and new B+L weighing electronics Suitable for valve bags from 10.0 kg - 50.0 kg

For sale is a Wagner WAC 70 circular saw in excellent condition, including a bundle loader. This high-quality machine is ideal for precise cutting and efficient handling of wood and workpieces in wood processing. Type: Circular saw Model: Wagner WAC 70 Additional equipment: Bundle loader Features of the Wagner WAC 70: Precision: The WAC 70 offers precise cuts for a wide range of wood types and formats. Performance: Robust construction for a long service life and high performance. Efficiency: The integrated bundle loader enables fast and efficient material feed, which significantly speeds up the production process. Operating Voltage: - Main: 400V, 50Hz - Control Voltage without transformer: 230V - Control Voltage with transformer: 25V Rated Current: 23A

Complete professional powder coating plant in excellent condition, available from today. 00000 00000 00000 Turnkey delivery, we take care of all the work Control units from Gema We will respond to your inquiry immediately with all the details. Smooth processing, since 2010 With plastic booths, powder center, pump delivery, automatic guns, visual controls from Siemens Simatec 3D scanners, according to the latest technology... and of course pre-treatment with nano-coating Drive only e.g. 2 hours and look at a reference plant, one of many in the DACH region (since 2010) Contact us now, it's worth asking See PDF for all details powceq com (project page) , see also video here

For the automatic powder plant, conveys powder coating up to 20m in an even and 8kg quantity PDF with all details available, see also powceq com

Stock number: SF178, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Powder sieve, Dimensions: Housing - Ø 250 x L 650 mm, Other: For continuous operation of powder/granules

Rail system for workpieces up to (as desired) 4m long and weighing 100kg Complete delivery, since 2010 in the DACH region Next reference page near you see PDF with all the details, see video Powder furnace, extraction stand for coating on both sides, can be upgraded with automatic coating equipment, be it Gema or Wagner Pow C EQ = Powder Coating Equipment We will respond to your inquiry immediately

Rail system for workpieces up to (as desired) 4m long and weighing 100kg Complete delivery, since 2010 in the DACH region Next reference page near you see PDF with all the details, see video Powder furnace, extraction stand for coating on both sides, can be upgraded with automatic coating equipment, be it Gema or Wagner Pow C EQ = Powder Coating Equipment We will respond to your inquiry immediately

Stock number: SF033, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Rotary sieve, Sieve: Ø 200 x L 650 mm, Manufacturer: Jesma, Type: 200/650, Other: For continuous sieving of powder/granules

Stock number: SF031, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Rotary sifter, Sieve: Ø 200 x L 650 mm, Manufacturer: Jesma, Type: 200/650, Other: For continuous sieving of powder/granules

Stock number: SF032, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Rotary sieve, Sieve: Ø 200 x L 650 mm, Manufacturer: Jesma, Type: 200/650, Other: For continuous sieving of powder/granules

Stock number: SF030, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Rotary sifter, Sieve: Ø 200 x L 650 mm, Manufacturer: Jesma, Type: 200/650, Other: For continuous sieving of powder/granules

VIBRATING SCREEN - best solution for liquids and powders, Dynamic three-dimensional vibrations., The vibratory motion of the screen spans both horizontal and vertical directions, providing the flexibility of adjustment in both axes., Minimal installation requirements., No vibration transmission from the upper section to the base, Possible addition of wheels to the base., Quick disassembly for cleaning or mesh replacement., Each screen supports the installation of 1 to 4 separation stages, yielding 2 to 5 distinct product fractions., Constructed in carbon steel or stainless steel., All parts in contact with material are on AISI 304 stainless steel Fully compliant with CE regulations most required screen diameter from 400 mm up to 2.200 mm to cover all needs, self cleaning system,, Just ask for your own vibrating screen by listing the following specs:, - material, - process, - size of good ...

Used automatic vertical sachet machine from Alpha Pack Europe type PM-100. New 2016. A filling machine for gels, creams, and ointments. Technical data: - 6 mm seal, - Capacity 30 - 50 pcs/min (depending on the package, - Sealer length: 30mm-120mm, - Seal width: 30mm-85mm, - Automatic single-line packaging machine for 3 or 4-seal sachets, - Notch on the sealer for easy opening, - PLC controlled machine, - Color touch screen with which all settings are made, - Photocell for printed film, - Structure and parts in contact with the product made of stainless steel, - Safety covers made of transparent plastic, - Hot-stamp” date printer for printing batch number and expiration date on sachets, - Piston dispenser, - Heated product tank with infinite temperature control. Weight 250 kg.

Screw feeder for powdered products

Professional Grade Powder Device with Vibration Table Analog control, like new and 12 filters for powder booth in high industrial quality (extra price) Measuring instrument, unused, with full warranty, fully assembled Pick-up requested near Freiburg (D), shipping 150 Eur Scope of delivery Injector up to 300gr/min Control Unit Pro Analog Powder spray gun C2 (without remote control buttons) All cables and hoses Trolley and Vibrating Table Description Universal, processes almost all powder coatings and part structures Powder Coating Equipment 510 gram hand pistpole, flat spray nozzle Most important components from Switzerland Efficient and precise User-friendly rotary switch Car. Regulation of the charging voltage (mA) Fair prices on wear parts

"EIAA x BATES :: Certified Preowned" We can offer you permanently revitalized filling systems for all areas of application. OFFER from a customer: Wagner filling line (screw packer) for valve bags with internal or external valve, made of paper / PE Machine was completely overhauled in 2025: New pneumatics New electrics New control cabinet with new components, e.g. control system (Siemens LOGO!) - manufacturer-independent New software - manufacturer-independent New weighing electronics (B+L dataPond 3F, high-speed, legal-for-trade) Parts made of stainless steel that come into contact with the product (product flap, pressure chamber, filling tube) Filling pipe for approx. 145mm valve width - conversion to other valve width possible if necessary Filling tube tapered to make it easier to attach the empty bags Steel construction newly powder-coated Schematics, diagrams n ...

General SKU321U760 MakeMettler Garvens TypeS3 No.330103 Year of construction2000 LocationBarneveld Main Features MaterialStainless steel Specified Features - Miscellaneous transport MaterialStainless steel General Floorspace1,16 x 0,70 m Total height1,87 m Weight260 kg CEcheck Extra SpecificationsCheckweigher system with a weighing range from a minimum of 10g to 1400g, delivering precision with an accuracy of 1g. This system is equipped with a touchscreen control interface. The conveyor belt is easily removable, with total dimensions of 1150x150mm.Powdered foodsGeneric medicinesTea, herbs & coffeeStarchAgrochemicalsSpicesPlastic & polymersCatalysts & fillersDetergent & surf.SugarOther feedSolid pharmaceuticsDyes & pigmentsMinerals & inorganicMiscellaneous transportMettler GarvensIndustries > Food & Feed > Powdered foodsIndustries > Pharmaceutical > Generic medicinesIndus ...

General SKU324U773 MakeOCS Checkweighers GmbH LocationBarneveld CEcheck TypeHC Main Features MaterialStainless steel Specified Features - Miscellaneous transport MaterialStainless steel General No.1004488 Year of construction2009 Floor space2,16x0,83m Total height1,71m Weight370kg Extra SpecificationsOperating pressure: 6 bar.Operating temperature: +5°C...+40°C.Maximum weighing range: 1500 g.Belt width: 195 mm.Scale platform: 195x250 mm.Feeder belt width: 32 mm.Feeder belt height is adjustable.Powdered foodsGeneric medicinesTea, herbs & coffeeStarchAgrochemicalsSpicesPlastic & polymersCatalysts & fillersDetergent & surf.SugarOther feedSolid pharmaceuticsDyes & pigmentsMinerals & inorganicMiscellaneous transportWipotecIndustries > Food & Feed > Powdered foodsIndustries > Pharmaceutical > Generic medicinesIndustries > Food & Feed > Tea, herbs & coffeeIndustries > Food &  ...

General SKU393U1105 MakeKrauss Maffei LocationBarneveld CEcheck TypeVZU 125/2,5 Main Features Materialmildsteel/halar Motor30 KW Inlet diameter80 mm Specified Features - Basket centrifuge Basket centrifugecheck Perforated basketcheck Capacity394 l Basket sizesø 1250 x 630 mm Wall thickness12 mm Max. loading weight500 kg With bottom dischargecheck Manual operatedcheck Liquid outletcheck Motor30 kW (400 V, 1500 rpm (Ex)) Max. basket speed950 rpm Max. temperature40°C Materialcarbon steel ST52 1.0570, Halar coating General No.6000756 Year of construction2006 Mounted on foundation platecheck Floorspace2,5 x 2 m Total height1,7 m Weight5000 kg ATEX designedcheck Extra SpecificationsHalar coatedMetal contact parts Hastelloy-C Technical specs Extra information- halar coatedPowdered foodsGeneric medicinesFine chemicalsStarchOther chemicalBiotechnologyAgrochemi ...

General SKU316W637 MakeMixaco LocationBarneveld TypeCM-30 Main Features MaterialStainless steel Volume24 Ltr. Motor5.5 KW Specified Features - Cold mixer Cold mixercheck Capacity24 l Vessel sizesø 400 x 300 mm Inlet400 mm Manual operated outletcheck Outletø 125 mm With motor5.5 kW (400V, 1425 rpm) Rotor speed1425 rpm MaterialStainless steel 1.4301 (304) General No.SN050024 Year of construction2005 Mounted on framecheck Floorspace1,40 x 0,90 m Total height1,25 m Weight250 kg Extra SpecificationsWith 2x mobile barrels, volume 24 l each.Powdered foodsGeneric medicinesTea, herbs & coffeeAgrochemicalsSpicesPlastic & polymersCatalysts & fillersDetergent & surf.Other pharmaceuticsCosmeticsSugarAnimal feedSolid pharmaceuticsDyes & pigmentsMinerals & inorganicCold mixersMixacoIndustries > Food & Feed > Powdered foodsIndustries > Pharmaceutical > Generic medicinesIndus ...

General SKU393U1107 MakeKrauss Maffei LocationBarneveld TypeDZU 125/2,5 Main Features MaterialStainless steel/Halar Motor22 KW Inlet diameter50 mm Specified Features - Basket centrifuge Basket centrifugecheck Perforated basketcheck Capacity382 l Basket sizesø 1250 x 630 mm Wall thickness12 mm Max. loading weight477 kg With bottom dischargecheck With scrapercheck Hydraulic operatedcheck Liquid outletø 150 mm With hydraulic unitcheck Motor22 kW (400 V) Max. basket speed950 rpm MaterialHalar coating, Stainless steel 1.4571 (316Ti), Stainless steel 1.4581 (348) General No.9670 Year of construction1983, rev 2001 Mounted on framecheck Floorspace2.5 x 1,5 m Total height1.5 m Weight3000 kg ATEX designedcheckPowdered foodsGeneric medicinesFine chemicalsStarchOther chemicalBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesE-waste & metal ...

General SKU316W650 MakeCoperion (type plate missing) TypeZVH-250.2-8SC Year of constructionUnknown Mounted on framecheck Main Features MaterialStainless steel/chrome Motor0.55 KW Inlet diameter165 mm Specified Features - Rotating valve Rotary valvecheck Rotor diameter200 mm Rotor width250 mm Number of locks:10 Lock sizes55x180x60 mm Capacityrotor ± 4,75 L Inlet165 mm Outlet50 mm Installation height360 mm With motor0,55 kW, 380/500 volt, 1400 rpm Rotor speed16,6 rpm Outside bearingscheck MaterialHard chrome, Stainless steel 1.4016, Stellite 1 Alloy General LocationBarneveld Floorspace1,10 x 0,90 m Total height0,92 m Weight180 kg Technical specs Extra informationcapacity ± 4,7 m³/hPowdered foodsGeneric medicinesTea, herbs & coffeeFine chemicalsStarchAgrochemicalsSpicesCatalysts & fillersFeed additivesDetergent & surf.Other pharmaceuticsSugarAnimal feedSoli ...

General SKU204U026 MakeWerner &: Pfleiderer TypeZSK 58 F96E Mach.No.231616 Year of construction1995 Sizes Screw diameter57.8 mm Main Features Motor74 KW Inlet diameter100 mm L/D27 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter57.80 L/D27 Co-rotatingcheck Ventedcheck Water coolingcheck AC-motorcheck Screw speed191 rpm MaterialNitriding steel 1.8519 General LocationBarneveld With switchgear(as is) Floorspace2.5x1.4 m Total height1,5 m Extra Specificationsthe currently installed head” on the extruder is a cleaning head. this is not a die.- there are 2 screw shafts present.- no screw segments present.- this extruder comes with brush screws.- the extruder comes with 4 extra housing segments.this extruder was part of a complete system.any associated machines are:Collin Calander Pharma 200x400 , sku: 204U929Sollich KK240 - Belt ...

General SKU359W975 LocationBarneveld CEcheck MakeLeistritz Sizes Screw diameter27 mm Main Features Motor15 KW L/D40 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter27 L/D40 Co-rotatingcheck Number of heating zones:10 Electric heatingcheck Water cooling9x DC-motor15 kW, 400 volt, 1750 rpm AC-motorcheck With variable speed drivecheck Screw speed30-500 rpm Feeding with metering screwK-tron Exchangeable segmentscheck Number of temperature controllers:1 Used oncarrier material Capacitymax 200 kg/h MaterialStainless steel, Stainless steel 2.4819 (Hastelloy C-276) General TypeZSE 27HP-PH-40D Mach.No.3899 Year of construction2010 With switchgearcheck Floorspace3,65 x 1,15 m Total height1,80 m Weight1200 kg Extra Specifications- This extruder has been used for testing carrier material. No API was produced/ used in this extru ...

General SKU422U1430 MakeMotan-Fuller LocationBarneveld TypeD6 250/10,5 CC Main Features MaterialStainless steel Motor0.75 KW Inlet diameter380 mm Specified Features - Rotating valve Rotary valve for air transportcheck Rotor diameter120 mm Rotor width350 mm Number of locks:9 InletDia. 380 mm Inlet flange sizes320x380 mm OutletDia. 80 mm Installation height360 mm With hoppercheck With motor0.75 kW, 220/380 volt, 1380 rpm Rotor speed26 rpm Air purged sealingscheck CapacityApprox 20000 l/h MaterialStainless steel 1.4552 General No.5576 Year of construction2001 Floorspace0,80x0,80 m Total height1,10 m Weight300 kg Extra SpecificationsWith hopper, dim. 650x660mmPowdered foodsGeneric medicinesTea, herbs & coffeeFine chemicalsStarchAgrochemicalsSpicesCatalysts & fillersFeed additivesDetergent & surf.Other pharmaceuticsSugarAnimal feedSolid pharmaceuticsDyes & pigme ...

General SKU422U1432 MakeMotan LocationBarneveld TypeD6 280/14CC Main Features MaterialStainless steel Motor0.75 KW Inlet diameter140 mm Specified Features - Rotating valve Rotary valve for air transportcheck Rotor diameter120 mm Rotor width350 mm Number of locks:9 Lock sizes80x80x350 mm InletDia. 140 mm Inlet flange sizes380x320 mm Outlet80 mm Installation heighttotal 660 mm With motor0,75kW, 220/380 volt, 1380/26 rpm Rotor speed26 Air purged sealingscheck Capacityapprox 20000 l/h MaterialStainless steel 1.4552 General No.1891 Year of construction1990 Floorspace0,70x0,75 m Total height0,66 m Weight110 kg Extra SpecificationsInput dia. 140mm, output 2x dia. 80mmPowdered foodsGeneric medicinesTea, herbs & coffeeFine chemicalsStarchAgrochemicalsSpicesCatalysts & fillersFeed additivesDetergent & surf.Other pharmaceuticsSugarAnimal feedSolid pharmaceuticsDyes &  ...

General SKU229W234 LocationBarneveld MakeTorex Main Features MaterialStainless steel Motor0.75 KW Inlet diameter350 mm Specified Features - Rotating valve Rotary valvecheck Rotor diameter250 mm Rotor width300 mm Number of locks:6 Lock sizes300 x 90 x 90 mm InletDia. 350 mm Inlet flange sizes430x280 mm OutletDia. 100 mm Installation height400 ( total 620 mm) With motor0.75kW, 230/400 volt, 945 rpm, (Ex) Rotor speed19 rpm Outside bearingscheck Capacity7200 l/h MaterialMild steel, Stainless steel 1.4301 (304) General Type93502 Year of construction2016 Floorspace0,80 x 0,70 m Total height0,62 m Weight90 kg ATEX designedcheckPowdered foodsGeneric medicinesTea, herbs & coffeeFine chemicalsStarchAgrochemicalsSpicesCatalysts & fillersFeed additivesDetergent & surf.Other pharmaceuticsSugarAnimal feedSolid pharmaceuticsDyes & pigmentsMinerals & inorganicRotating valve ...

General SKU231W249 MakeOCS TypeHC-IS-2000 No.1004701 Year of construction2009 Mounted in framecheck Main Features MaterialStainless steel Specified Features - Miscellaneous transport CapacityMax 750 gram Miscellaneous transport MaterialStainless steel General LocationBarneveld With switchgear(as is) Floorspace0,70 x 0,55 m Total height1,80 m Weight200 kg CEcheck Extra Specificationsbottel checkweigher115/230 volt, 0,8 KVA, with touchscreen control and format parts,&:nbsp:e=0,1 gramm, d=0,1 grammPowdered foodsGeneric medicinesTea, herbs & coffeeStarchAgrochemicalsSpicesPlastic & polymersCatalysts & fillersDetergent & surf.SugarOther feedSolid pharmaceuticsDyes & pigmentsMinerals & inorganicMiscellaneous transportOCS CheckweighersIndustries > Food & Feed > Powdered foodsIndustries > Pharmaceutical > Generic medicinesIndustries > Food & Feed > Tea, herbs & coffeeIndustr ...

General SKU352W931 LocationBarneveld MakePowtek LTD Main Features MaterialStainless steel Motor4 KW Length450 mm Specified Features - Sieve granulator Gratercheck Rotor sizesdia. 300mm x 470mm Sieve sizesdia. 280 mm Sieve perforation8 mm With hoppercheck Inlet600 x 600 mm Outlet450 x 400 mm Motor4 kw (380 V, 1440 rpm, (Ex)) Speed+/- 84 rpm MaterialAluminium, Stainless steel 1.4552, Stainless steel General TypeP300x450 Nibbler No.P9211 Floor space2,0 x 0,7 m Total height1,0 m Weight430 kg ATEX designedcheck Extra Specifications- aluminium cladded inlet- Previous use in food industry Technical specs Extra informationscrew dia. 280 mmPowdered foodsSieve granulatorsFine chemicalsStarchAgrochemicalsSpicesCatalysts & fillersFeed additivesCosmeticsFood additivesSugarAnimal feedConfectionerySolid pharmaceuticsDyes & pigmentsMinerals & inorganicPowtekIndustries > Food ...

General SKU362U983 MakeServolift LocationBarneveld CEcheck TypeMC Main Features MaterialStainless steel Volume1200 Ltr. Motor14 KW Specified Features - Tumbler mixer Tumbler mixercheck Capacity1200 kg With motor2x 5,5 kW (400 V, 1430/64 rpm) With variable speed drive5-15 rpm MaterialStainless steel 1.4301 (304), Stainless steel 1.4541 (321) General No.11576 Year of construction2007 With switchgearcheck Floorspace3,10 x 2,30 m Total height3,20 m Extra SpecificationsContainer type: SL containers: machine delivered without containers:&:nbsp: Hydraulic unit: 2.2 kWPowdered foodsGeneric medicinesTea, herbs & coffeeAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOther pharmaceuticsCosmeticsFood additivesAnimal feedOther feedSolid pharmaceuticsDyes & pigmentsAPITumbler mixersMinerals & inorganicServoliftIndustries > Food & Feed > Powdered foodsIndust ...

General SKU354T991 MakeRuberg Mischtechnik KG LocationBarneveld Pressure Working pressure jacket3 Bar Main Features MaterialStainless steel Volume10 Ltr. Motor11 KW Specified Features - Paddle mixer Continuous mixercheck Useful capacity± 10 Ltr. Trough sizesDia: 140x940 mm InletDia: 64 mm OutletDia: 75 mm With jacketcapacity 10 Ltr. Max. temperature110 °C Glands air purgedcheck Motor11 kW, 400 Volt, 2950 rpm MaterialStainless steel 1.4301 (304) With jacketcheck General No.RMG 10/1647 Year of construction2000 Mounted on framecheck With switchcheck With switchgear( as is) Floor space2,8x1,1 m Total height1,9 m Weight700 kg Extra SpecificationsComes with an additional pin rotor.Powdered foodsGeneric medicinesStarchAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesDetergent & surf.Other pharmaceuticsCosmeticsFood additivesSugarLubricants  ...

General SKU207U080 Makem-tec mathis technik GmbH TypeTaumelmischanlage No.75300040001 Year of construction2004 Mounted on framecheck Main Features MaterialMild steel Volume800 Ltr. Motor9.2 KW Specified Features - Tumbler mixer Tumbler mixercheck Barrel mixercheck Capacity190 Ltr., 800 Ltr. Inletdia. 450 mm Outletdia. 260 mm With motor9,2 kW 230/400 Volt Tumbler mixers Capacity190 Ltr., 800 Ltr. Inletdia. 450 mm Specified Features - Tumbler mixer MaterialMild steel General LocationBarneveld Floorspace2,4x2,8 m Total height3,6 m Weight3260 kg CEcheck Extra Specificationswith tank:&:nbsp:max. 190 Ltr., inlet: 450, outlet: 260 mmmax. 800 Ltr., inlet: 450, outlet: 260 mmPowdered foodsGeneric medicinesTea, herbs & coffeeAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOther pharmaceuticsCosmeticsFood additivesAnimal feedOther feedSolid pharma ...

General SKU035T174 MakeWaeschle TypeDK 8/250 AC No.6721/03 Year of construction1975 LocationBarneveld Main Features MaterialAluminium/Stainless steel Motor0.55 KW Inlet diameter250 mm Specified Features - Rotating valve Rotary valvecheck Rotary valve for air transport:Blow through rotary valve Alu: Rotor diameter250mm (stainless steel) Rotor width250mm Number of locks:8 Lock sizes250x70mm Inlet220x180mm Inlet flange sizes325x275mm Outlet220x180 Outlet flange sizes325x275mm Installation height400mm With motor0,55 KW, 220/380 Volt, 1400 rpm Rotor speed33 rpm Outside bearingscheck Air purged sealingscheck MaterialAluminium, Stainless steel 1.4305 (303) General Floorspace0,7x0,6 M Total height0,5 M Weight125kgPowdered foodsGeneric medicinesTea, herbs & coffeeFine chemicalsStarchAgrochemicalsSpicesCatalysts & fillersFeed additivesDetergent & surf.Other pharmace ...

General SKU329T1341 MakeAzbil Telstar Technologies TypeLyoAlfa 15-55 No.3392 Year of construction2016 LocationBarneveld Main Features MaterialStainless steel Surface0.48 m2 Specified Features - Freeze dryer Freeze dryercheck Cooling surface0,48 m² Plate sizesdia. 300 mm (not delivered) With cooling compressorcheck MakePfeiffer Vacuum TypeDUO 10M CapacityS(N₂): max. 12 m³/h Cooling mediumR-507a Motor0,45 kW 100-110/200-230 Volt MaterialStainless steel 1.4401 (316), Stainless steel 1.4404 General With switchcheck Floorspace0,7x0,76 m Total height1,1 m Weight240 kg Extra SpecificationsIce condenser capacity: 22 kgFinal condenser temperature: -55 °CNumber of compressors: 1Base unit weight: 190 kgTotal power: 3,2 kWPowdered foodsGeneric medicinesFine chemicalsBiotechnologyFeed additivesCosmeticsFood additivesSolid pharmaceuticsBiopharmaceuticalAPIFreeze dryersT ...

General SKU354T968 LocationBarneveld MakeWerner &: PFleiderer Sizes Screw diameter37 mm Main Features Motor7.6 KW L/D27 Specified Features - Double screw extruder Double screw extrudercheck Number of hours284222 Screw diameter37 mm L/D27 Co-rotatingcheck Number of heating zones:5: 1 cooling: 4 heating Steam heatingcheck DC-motor7,6 kW 440 Volt With variable speed drivecheck Screw speed0-400 rpm Exchangeable segmentscheck Number of temperature controllers:5 MaterialMild steel General TypeContinua 37/27 D Mach.No.220331 Year of construction1985 With switchgear(as is) Floorspace3,2x1,3 m Total height2,3 m Weight1700 kg Extra Specificationswith extra screwsPowdered foodsAgrochemicalsPlastic & polymersCosmeticsAnimal feedOther feedDouble screw extrudersWerner & PfleidererIndustries > Food & Feed > Powdered foodsIndustries > Chemical > AgrochemicalsIndustries >  ...