powder line used for sale

Overview This complete filling line for non-returnable PET bottles was manufactured 2004 by the german manufacturer KRONES. The line was running as a non returnable bottle filling line. The line is designed for high-capacity beverage production, handling up to 12,000 b/h and is in a good condition.    Technical Data Capacity: 12,000 bph (at 1,5L); 14,000 bph (at 0,5L)  Filling product: carbonated water and soft drinks with 15°C and 8,0 g/l CO2 Bottle Formats: 0,5L and 1,5L PET CSD Cap Formats: PCO 1810 Contiroll labelling station 2-3-340 for wrap-around label from a reel with hotmelt and 2 x cold glue labelling station 8-8-130 for paper label Packaging formats: shrink wrapping with/without carry handle (3x2) Pallet: 4 x ¼ Plastic pallet (600 x 400 mm); 2 x Half-size pallet (800 x 600 mm) on Euro pallet (1.200 x 800 mm)  Application: CSD Hygienic design condition: good technical con ...

Drawing line Composed of Lifting platform INDEVA LIFTRONIC Jib Crane 40 kg with Scale Reel handling unit Drawing machine SAMPSISTEMI MT 106 6A year 2012 Including wire drawing machine, furnace and winding machine Maximum input material diameter 1.5 mm Output material diameter from 0.30 to 0.10 mm Manual gearbox only, ideal for DIN 250, DIN 355 and P15, can also be used with DIN 160, DIN200, P5 and P10 Installation size approx. 9000x2700x3000 mm Auction-ID: A7-45347-641

Machinery can be retired from the second half of January 2026 Drawing line Composed of Lifting platform with scale Reel handling unit MATRAF wire drawing machine Including wire drawing machine, furnace and winding machine Maximum input material diameter 1.5 mm Output material diameter from 0.30 to 0.10 mm Automatic roll change from DIN125 to DIN200, P5, P10 Manual transmission from DIN250 to DIN355, P15 Installation size approx. 9000x2700x3000 mm Auction-ID: A7-45347-636

Drawing line Composed of Lifting platform with scale Reel handling unit SAMPSISTEMI TE/25-A drawing machine year 2003 Including wire drawing machine, furnace and winding machine Maximum input material diameter 1.5 mm Output material diameter from 0.30 to 0.10 mm Automatic coil changer DIN200 Manual gearbox DIN160 and P10 Installation size approx. 9000x2700x3000 mm Auction-ID: A7-45347-638

Composed of an entrance made up of a series of motorized belts with a width: 90 mm, by BLINKMACHINES. This is followed by BLINK MACHINES brand thermo sealing packaging machine model BKY1, year 2018, weighing 1500 kg. Power: 15 kW. This is followed by a BLINK MACHINES brand oven, model BKS200, year 2018, weighing 500 kg and powering 15 kW. Then a motorized roller conveyor begins: about 550 mm wide. The line continues with a COMARME brand taping machine, model GEM X520, year 2018, weight 250 kg. Working dimensions: 550 × 500 mm. Followed by a strapping machine with a mouth of dimensions: 520 × 500 mm. This is followed by the LABEL ENGINEERING labeller and a series of 500 mm wide motorized rollers and belts. It concludes with a EUROPACK manipulator arm, model WINNER 250, year 2013, capacity: 25 kg, total weight: 2000 kg. including protective barriers. Including INDEVA suspen ...

Machinery can be retired from the second half of January 2026 Drawing line Composed of Lifting platform with scale Reel handling unit MATRAF wire drawing machine Including wire drawing machine, furnace and winding machine Maximum input material diameter 1.5 mm Output material diameter from 0.30 to 0.10 mm Automatic roll change from DIN125 to DIN200, P5, P10 Manual transmission from DIN250 to DIN355, P15 Installation size approx. 9000x2700x3000 mm Auction-ID: A7-45347-635

Drawing line Composed of Lifting platform with scale SAMPSISTEMI BD 250 A reel handling unit Drawing machine SAMPSISTEMI RC 150 / MT 160 6A year 2017 Including wire drawing machine, furnace and winding machine Maximum input material diameter 1.5 mm Output material diameter from 0.30 to 0.10 mm Automatic coil changer DIN200 Manual gearbox DIN160, P5 and P10 Installation size approx. 9000x2700x3000 mm Auction-ID: A7-45347-649

Drawing line Composed of Lifting platform with scale Reel handling unit SAMPSISTEMI MC/16-6A drawing machine year 2002 Including wire drawing machine, furnace and winding machine Maximum input material diameter 1.5 mm Output material diameter from 0.30 to 0.10 mm Automatic coil changer DIN160 Manual gearbox DIN125, P5 Installation size approx. 9000x2700x3000 mm Auction-ID: A7-45347-647

Drawing line Composed of Reel handling unit Module 1 Drawing machine SAMPSISTEMI TE/40-MA year 2019 Module 2 Drawing machine SAMPSISTEMI MT 250 4A year 2009 Including wire drawing machine, furnace and winding machine Maximum input material diameter 3.0 mm Minimum output material diameter 1.5 mm Ideal for large reels (800-900 kg) Installation size approx. 9000x2700x3000 mm Auction-ID: A7-45347-666

Machinery can be retired from the second half of January 2026 Drawing line Composed of Lifting platform with scale Reel handling unit MATRAF wire drawing machine Including wire drawing machine, furnace and winding machine Maximum input material diameter 1.5 mm Output material diameter from 0.30 to 0.10 mm Automatic roll change from DIN125 to DIN200, P5, P10 Manual transmission from DIN250 to DIN355, P15 Installation size approx. 9000x2700x3000 mm Auction-ID: A7-45347-637

Drawing line Composed of Lifting platform with scale Reel handling unit SAMPSISTEMI TE/25-A drawing machine year 2007 Including wire drawing machine, furnace and winding machine Maximum input material diameter 1.5 mm Output material diameter from 0.30 to 0.10 mm Automatic change of coils DIN 160 and DIN200 Manual gearbox DIN125, DIN250, P5 and P10 Installation size approx. 9000x2700x3000 mm Auction-ID: A7-45347-639

Drawing line Composed of Lifting platform with scale Reel handling unit MATRAF wire drawing machine Including wire drawing machine, furnace and winding machine Maximum input material diameter 1.5 mm Output material diameter from 0.30 to 0.10 mm Automatic roll change from DIN125 to DIN200, P5, P10 Manual transmission from DIN250 to DIN355, P15 Installation size approx. 9000x2700x3000 mm Auction-ID: A7-45347-634

Overview  This complete Bag‑in‑Box filling line was manufactured by OETTEL Maschinen GmbH, CERMEX, and PRECIA MOLEN. The line is designed for filling water and syrup into Bag‑in‑Box formats. It was in service until September 2025 and is currently stopped, still installed, with energy disconnected. The line is described as fully operational, is available immediately, and can be visited on request. Preventive maintenance was carried out twice per year; the last maintenance took place in January 2025. Palletizing, stretch wrapping, and pallet labelling equipment were upgraded in 2017 and 2023. Technical data Capacity: 5 L BIB: 650 BIB/hour / 7 pallets/hour 19 L BIB: 420 BIB/hour / 13 pallets/hour Formats: 5 L / 19 L Bag‑in‑Box Application: Water and syrup Configuration: Carton forming, Bag‑in‑Box filling, checkweighing, carton closing, conveying, palletizing, stretch wrappi ...

COMIL automatic packaging line• Year : 1991 • Complete packaging line with motorized conveyors, shrink oven and loading area• Robust steel structure with three-phase power supply• Adaptable to different product formats• Synchronized conveyors for continuous throughput• Integrated control cabinet• Estimated weight: approx. 3500 kg Auction-ID: A1-45443-52

Used bread roll line W&P, type: Rollprofi -In bakery condition- For cut rolls, smooth and round knitted, long rolled and double rolls. - 5 rows - 600 mm working width - Integrated dough divider and drum rounder, Multimatic - Pre-proofing time: 12 min - 6 min before long-distance taxiing station - 6 min between long roller and cutting station - Weight range:24-85 g - Output: max. 4,680 pcs. / h Visits and test runs are possible by arrangement.

Bread roll line KÖNIG, type: G2000 with Mini Rex Futura -In good used condition- Compact bread roll line - Mini Rex Futura head machine - Proofer G 2000, SA2-ST2 - Proofing time approx. 6 minutes at maximum output - With side discharge belt single-row - Condition: good, everything checked - Ready to use - Machine is still being cleaned - Head machine output: approx. 4,000 pcs./h - Capacity proofer: approx. 2,500 pcs./h The roll line is in good condition and is ready for immediate use. Viewing and test run are possible at any time by arrangement.

Complete dough line for the production of ciabatta, square bread and baguette Consisting of the higher-level production units: - Dough pre-portioner - Extruders - Dough sheet is formed - Flouring stations - Cutting roller for longitudinal cutting - Guillotine for cross-section - Dismissal - Length of the line: approx. 20 meters - Capacity: max. approx. 2,100 kg / h - Condition: Good, ready to use The facility has always received the service and is in good condition. Already dismantled and stored. Viewing is possible.

Preformed Bottle Filling, Capping, Labelling and Packing Line for 2-litre plastic containers (jugs/bottles) for fresh milk with screw cap closure. The line is equipped with integrated control systems and is suitable for hygienic operation., Scope of Supply:, 1. Filling and Capping Machine, - Integrated gravity filling and screw capping system., - Designed for CIP (Clean-in-Place) cleaning., - Fully enclosed construction with access doors., - Equipped with sterile air filtration system., - 32 filling valves and 10 capping heads., - Touchscreen operator control panel., - Cap feeding bunker with conveyor to capping unit., Manufacturer: Weightpack, Model: WFT 32.10.160, Serial Number: WL239, Year: 2008, Capacity: up to 7.000 containers per hour, 2. Leakage Testing Unit (Squeeze Tester), Designed to detect container leakage after filling., Manufacturer: Teledyne TapTone, Serial Number: E05-00 ...

Tetra Pak Tetra Therm Aseptic Visco Line for pasteurisation / sterilization of concentrated beverage bases by a Tubular Heat Exchanger (THE) system. Capacity 2.600 up to 8.150 liter per hour. At the current plant the line is used for products up to 100 °C. The indirect heating temperature is up to a maximum of 135 °C. Holding time set at 0 / 5 / 10 seconds. CIP Cleanable., In the Tetra Therm Aseptic Visco system, heating and cooling will take place in Tetra Spiraflo MTC tubular heat exchangers. Modules with a narrow ring section are used for heating and cooling to ensure optimal heat transfer. The product is pre-heated in stages within the Spiraflo tubular heat exchangers. The Spiraflo tubular heat exchanger is equipped with a sliding O-ring system. This means that the product and the outer tubes are not welded together. This prevents stress corrosion cracking and minimizes maintenance ...

Machine: MASTERWOOD door production line DOORLINEPROCESS Year: 2002 Components: PROJECT DOOR + DOORLINE + AMS automatic transfers Works: calibration, hinge housing, lock drilling, key/handle hole, installation of ANUBA plugs Loading: CARICATORE AMS system, suction cups, vacuum pump Panel dimensions: L max. 2500 mm, max. W 1300 mm, h max. 120 mm Transfer systems: AMS mat, AMS SCARCATORE Control: GENERAL ELECTRICS T-LINE + TECNOS MW CN12 Standards: EC Auction-ID: A1-45443-37

HAMER UNI-1000 automatic thermoforming, filling and sealing machine, designed for single-dose packaging (liquid products such as oil, cosmetics, etc.). Key features: Pressure and vacuum thermoforming Contact heating system Heat sealing station 3-head dosing system Die-cutting and cross-cutting system Scrap ejection system Integrated marking system Touch Screen Control (Delta HMI – GP-477R) Technical data: Brand: HAMER Model No.: UNI-1000 Serial number: A-10535 Suitable for the production of single-dose containers in the food, cosmetic or pharmaceutical sectors. Compatible with food-grade materials such as PVC/EVOH/PE films. Approximate dimensions: Length: 4,000 mm Width: 1,500 mm Height: 2,000 mm Approximate weight: 2,000 kg Installed in a clean production environment. Possibility of on-site inspection. Auction-ID: A7-44864-5

Manufacturer: DMG GILDEMEISTER Year: 2008 Type: CNC lathe with motorized tools with C and Y axes Numerical control: Heidenhain iT Plus Max. turning diameter: 400 mm Max. turning length: 600 mm Distance between tips: 615 mm Main spindle: 20–6,000 rpm – 16 kW – max. torque 155 Nm Bar capacity: Ø 52 mm – spindle bore 61 mm C-axis: 0.001° resolution Turret: 12 positions – 12 motorized tools (5,000 rpm, 3.7 kW) Strokes: X 160 mm / Z 450 mm / Y ±32 mm Fast feeds: X 60 m/min – Z 45 m/min Attachments: Chip conveyor, 12 bar HP coolant, workpiece catcher, fixed tool holders (5), motorized tool holders (3), hydraulic system Dimensions (mm): 8000 × 3000 × 2700 Weight (kg): approx. 4500 Remarks: Machine in good condition, powered on. Serial number included in the description. Auction-ID: A1-44765-212

The Waukesha Cherry-Burrell 015 is a rotary positive displacement pump which can handle dairy products (e.g., yoghurt, quark, curd and butter), solids (e.g., cherries and olives), slurries, pastes, and a variety of liquids. If wetted, they offer self-priming performance. A gentle pumping action minimizes product degradation. They also offer continuous and intermittent reversible flows and can operate dry for brief periods of time. Flow is relatively independent of changes in process pressure to, so output is relatively constant and continuous. Duo - twin wing stainless steel lobes. Nominal displacement: 0,054 liter per revolution. Maximum nominal capacity: 2,0 m3/h. Inlet / Outlet connection: 1-1/2. Maximum product pressure: 13,8 bar. Maximum pump speed: 700 rpm. The pump is used in a ice cream factory for product pumping. The current motor with this pump is 0,75 kW - 1,395 rpm - 380/420 ...

Tebel OST-IV Closed cheese vat of 8.000 ltr. Double jacketed for injection of steam or hot water so the temperature of the milk inside the vat can be indirectly adjusted. Stirring, cutting tools, welded to a horizontal shaft. This is driven by a drive unit with frequency converter. During cutting the tools rotate in the opposite direction as during stirring. The coagulum is cut by sharp radial knives of stainless steel. Whey can be drawn off through a perforated pipe (whey suction device). This pipe is lowered into the whey until it is only just immersed. The curd is discharged through the bottom valve. The vat is inclined (4%) toward the bottom valve to facilitate emptying. After a production run the vat is cleaned by four rotating CIP nozzles located in the top. All parts are made of stainless steel AISI 304 except the drive unit. Stainless steel MCC panel at the backside, close to the ...

Tebel OST-IV Closed cheese vat of 8.000 ltr. Double jacketed for injection of steam or hot water so the temperature of the milk inside the vat can be indirectly adjusted. Stirring, cutting tools, welded to a horizontal shaft. This is driven by a drive unit with frequency converter. During cutting the tools rotate in the opposite direction as during stirring. The coagulum is cut by sharp radial knives of stainless steel. Whey can be drawn off through a perforated pipe (whey suction device). This pipe is lowered into the whey until it is only just immersed. The curd is discharged through the bottom valve. The vat is inclined (4%) toward the bottom valve to facilitate emptying. After a production run the vat is cleaned by four rotating CIP nozzles located in the top. All parts are made of stainless steel AISI 304 except the drive unit. Stainless steel MCC panel at the backside, close to the ...

consisting of: automatic glass retraction, Fabr. HEGLA, Type: ISO, Ser No. 2033401055, glass washing and drying station, Fabr. LISEC, Type: VHW-F29/V8, YOC 2022, Ser-No. 315117/944, Glass transport station, Fabr. LISEC, Type: RTVB1527MZU2, Year 2019, Ser No. 383109341, visiting station, Fabr. LISEC, Type: RSV-38/27B, Year 2019, Ser No. 320-109338, Press Unit, Fabr. LISEC, Type: FPS-35/27U2, Year 2019, Ser-No. 343-109342, Frame Conveyor, Fabr. LISEC, Type: FR-400H, Year 2019, Ser-No. 550-109339, Dam system with sealing system, Fabr. LISEC, Type: VSL-10-27, Ser-No. 100170 with 2 stowage sections, dead weight: 4500 kg, as well as separate control/control cabinet system with cooling system, Fabr. RITTAL, control unit, dosing unit, pump and valve technology, max. working height of the system: 2700 mm

consisting of: 8 large shelves, Fabr. HEGLA, type: FLB, load capacity: 40,000 kg each, for lengths up to: 6,000 mm, tilting table/glass support, Fabr. HEGLA/HAGER, year 1988, Ser no. 0880342, Floatglasschneid- u. Brechtisch, Fabr. HEGLA, cutting bridge, Fabr. HEGLA, type: OPTIMAX 6032ES, built in 1996, Ser no. 6079, Net weight: 6,500 kg, Storage table, Table surface: approx. 3200x6000 mm, with operating terminal, PC tower, monitoring monitor, lattice enclosure and light barrier system

consisting of: tilting table, Fabr. HEGLA, type: ART6032, built in 2005, Ser no. E7662, net weight: 3,900 kg, surface layer unit, cutting table with cutting bridge, Fabr. HEGLA, type: VSG A46-MT, year 2003, Ser-No. 2118, footprint: approx. 3200x7000 mm, dead weight: 11,000 kg, max. working pressure: 6 bar, with control unit, lattice housing and light barrier system

Line for painting door glass, consisting of: - automatic loader with flap arm equipped with LOGLAS 16.30 suction cups - automatic loader with bridge structure, programmed picking on LOGLAS/CL 16.30 trolleys - automatic oscillating spraying machine FALLENGLASS 1700 - year 2007, with belt conveyor covered with paper, complete with inlet roller conveyor extension with oscillating and ionizing blower unit - PRE-HEATING OVEN in-line with lower infrared lamps PRE/I-NIR - 180° sideshift with ventilated transversal flash-off oven with CEFLA GT180/3400/5500 air-heating coil - in-line drying oven with hot air and infrared lamps GLASSOVEN EL/7 - year 2007 - cooling tunnel with upper and lower air curtains CEFLA GLASSCOOL SI-3/3 - year 2007 - motorized conveyor VTR 2500 - automatic unloader on trolleys with CEFLA bridge structure UNLOADER -WASHING MACHINE NOT PRESENT- Auction-ID: A7-454 ...

Complete falling film vacuum evaporator, previously used for skimmed milk or sweetened whole milk, consisting of a 4 effect TVR Evaporator. Still mounted in the cheese plant in Spain till end of April 2026. The product feed rates in the installation are ± 14 t/h with a comparative temperature between 73 and 50°C from the 1st to the 4th effect., Processing rates used by the current plant for skimmed milk:, - Infeed flow: 14.000 kg/h @ 9% DM, - Infeed temperature: 5 °C, - Water Evaporation: 11.375 kg/h, - Outfeed flow: 2.625 kg/h @ 48% DM, - Steam consumption: 2.050 kg/h, Processing rates used by the current plant for sweetened whole milk:, - Infeed flow: 14.000 kg/h @ 25% DM, - Infeed temperature: 5 °C, - Water Evaporation: 7.637 kg/h, - Outfeed flow: 6.363 kg/h @ 55% DM, - Steam consumption: 1.375 kg/h, Approximately operating temperatures:, - First effect (steam side): 73 °C, - Fir ...

Equipped with Pehu 320DSTV graphics control, size base machine approximately 1800x1560x2250mm, on primeval track already disassembled on and including 1 pallet Auction-ID: A1-45188-166

Overview This PET filling line was manufactured between 1996 - 2019 by several European manufacturer. The line is designed for carbonated beverages such as lemonades and also suitable for water with or without CO₂. With an output capacity of 14.000 bph, it offers a complete solution from bottle blowing to palletizing. This equipment is in good condition and still fully operational.   Technical Data Capacity: 14.000 bph Filling product: carbonated water and soft drinks  OPP wrap-around label from a reel with hotmelt and glue labelling station Packaging formats: shrink wrapping without tray Pallet: Euro pallet (1.200 x 800 mm)  condition: good technical condition, still in production Scope of Delivery Blow moulding machine | Sidel | SBO10 | 2010 Elevator preform | Sidel | 2010                                                                         ...

Condition: Used Stock Number: 875B Marel Masterslice Type: TA1511 Marel Masterslice Serial number: 10090783 Marel Masterslice Year of construction: 2011 Marel Masterslice Outfeed conveyor 170 mm wide Marel Masterslice Dimensions: 2100 x 1000 x 1500 mm Marel Masterfill Type: TA1516 Marel Masterfill Year of construction 2011 Marel Masterfill Dimensions: 1000 x 750 x 1200 mm

Longitudinal cutting line for sheet metal coils, consisting of: - 1 decoiler with loading trolley - 1 cutting head - 1 hole passage table - 1 pneumatic press with felt - deburring rollers - 1 x 1-arm discharge flag EXCLUDING trim winder Technical data: Maximum cutting width 1200 mm Strip thickness from 0.30 mm to 1.20 mm Line working speed 180 mt/min Maximum coil weight 6,000 kg Coil OD up to 1200 mm Electrical panel upgraded in 2016 DOCUMENTS, MANUALS and LAYOUTS NOT AVAILABLE MANUFACTURER, MODEL AND DATE OF CONSTRUCTION NOT DETECTABLE MACHINE NO CE Auction-ID: A7-45688-1

Pastry line Seewer Rondo SPF 602 Condition: used, functional Year of Make: 2000 Calibration head, built in 1996 Cutting station Sprayer Filling station Guillotine Incl. cutting tools

Compact roll line WP Rollprofi Year of Make: 2005 Condition: repaired, cleaned & checked Suitable for the production of sliced rolls, smooth rounds, long-rolled rolls and double pieces Weight range: 30-85 g Hourly output: max. 3,750 pieces 4-row system with 600 mm working width Integrated dough divider and drum rounder, Multimatic Pre-proofing time 12 min (6 min in front of long roller station and 6 min between long roller and cutting station) Hanging drying Maintenance-free suspension chain with automatic tensioning Variable depositing device for digestate carriers of the 3

Dough sheeter WP Kemper Quadro Relax S Modular high-performance roll line for processing roll dough with long pre-proofing Head machine with dough strand former, 2x flour shaker, RelaxS roller mill, SoftCut weighing knife, stamping station and extendable and cleanable EasyPull conveyor belt Products: square biscuits (TA: max. 170) Weight range: 25 to 1000 g/pc (depending on the knife roller) Capacity: max. 800 kg dough/h Hourly output: max. 10,000 pcs/h (with 5-row operation) Working width: 800 mm Depositing device with take-off length max. 2000 mm Touch Screen Control

Works perfectly Full line Panel press Oil heating Power 31kw 250/130cm Automation of press entry and exit Ejector to moulder for example ORMA SC2R-300 gluing machine at press infeed 380V Auction-ID: A3-43511-36990

Bulk of food packaging Premium LINE, disposable knives, forks, spoon cups, cups, salad bowls, bowls, sausage plates, aluminium packaging, bowls with lids, soup bowls, paper plates, coffee cups, coffee spoons, chicken bags and delicatessen bags Auction-ID: A7-45677-107

Meiko Rinsing Line + Disinfection - Automatic Topline 40, Year 2020 unused! With dishwasher + 3 spout basins, ready to connect, VDE tested Auction-ID: A7-45677-83

Meiko Dishwashing Line + Disinfection - Automatic Topline 40, built in 2020, with a spout basin + sink base cabinet + wall shelf, ready to connect, VDE tested Auction-ID: A7-45677-85

Length 7 meters, extendable behind part 150cm total 850cm. Concerns trailer from 2017 is unused. Auction-ID: A1-42013-89

Lot concerns container including approximately 2500 meters of ship mooring lines Auction-ID: A1-40134-337

Equipped with: Charging cable. Reversing camera, full map navigation system, Bluetooth phone preparation, keyless entry, cruise control, automatic air conditioning, heated front seats including heated steering wheel and LED daytime running lights. ABS / Anti Lock Braking System, ESP / Electronic Stability Program, traction control & anti slip control, hill hold function, multiple airbags (front, side and head), automatic low beams, electrically adjustable, foldable and heated exterior mirrors, electric windows front, extra tinted glass, automatically dimming interior mirror, central locking with remote control and a multifunctional leather steering wheel. Auction-ID: A1-42013-181

Incl. steel measuring plate with table size 1200x800x30 mm (overall dimensions 1200x800x150 mm) Auction-ID: A1-45714-42

Various pneumatic linear actuators, cylinders and ball rail guides, excluding pallet trucks Auction-ID: A1-45714-21

Overview  This fully automatic packaging system for jars was built by Buhmann pac solutions System GmbH in 2016 and has been used very little, with only approx. 5,000 operating hours (of which approx. 2,000 hours were in pure production operation). The line includes a carton erector (wrap-around trays) and a packing unit and, in addition to packaging single-type cartons, also offers the option of automatically mixing offline products (mixed cartons). The system was regularly maintained by Buhmann & Yaskawa, with around €200,000 invested in maintenance and servicing between 2020 and 2024. The system is in very good condition and is available immediately. Technical details  Performance Product infeed online: max. 280 jars/min Format 3: max. 220 jars/min Mix type A: max. 140 jars/min (11.5 cartons/min) Mix type B: max. 140 jars/min (11.5 cartons/min) Total output: max. 350 jars/min or 3 ...

CMT Cheese Stretching and Moulding Line . CMT FL 1400 / Boilers/ Tanks/ Moulding / Extruding . CMT Cheese Cooking, Stretching and Moulding Line Screw Hopper for Cheese Transfer Moulding Machine with 2 Sets of Moulds Boiler and Hot Water Tanks Control Panel Manual Book Technical Manual Condition : Good Location :, Use: Cheese Cooking, Stretching and Moulding

A complete Groninger bottle filling line is available. 1) Bottle unscrambler Groninger ZSB 2000, year of manufacture: 1995. 2) Filling machine Groninger DFV 1000Q, year of manufacture: 2013, filling stations: 10, additional function: transverse transfer system, output: approx. 9000/h, dosing range: 5ml-1000ml, container height range: 30mm-250mm, transport cup dimensions X/Y: 108mm/80mm, operating hours: approx. 24100h. 3) Cap sorter Groninger ZSK 1500, year of manufacture: 1995, sorting disc speed: 25rpm. 4) Capping machine Groninger KVK 106, year of manufacture: 1995, max. capping output: 9000/min, max. container diameter: 100mm, max. container height: 200mm, machine dimensions X/Y/Z: approx. 3400mm/1450mm/2550mm, weight: approx. 1500kg. 5) Discharge conveyor Groninger, year of manufacture: 1995. Documentation available. An on-site inspection is possible.

Overview  This complete PET water bottling line was manufactured on average in 2006 by European manufacturers including Siapi, Melegari S.p.A, P.E Srl, So.Te.Ma.Pack, Comag, TMG, Domino and Atlanta. The line will remain in production until the end of June 2025, offering the possibility to see it live in operation. All equipment is in very good working condition with complete maintenance history, making it an immediately operable turnkey solution. Technical data  Capacity: up to 6,800 b/h for 0.5L bottles, up to 6,000 b/h for 1.5L bottles Formats: 500ml PET, 1500ml PET Neck finish: 30/25 Packing: 500ml bottles: 24-pack shrink film 1.5L bottles: 6-pack shrink film Bottle diameters: 203mm (0.5L), 317mm (1.5L) Equipment condition: very good, complete maintenance history available Scope of Delivery Blow molding machine: Siapi EA4 Filling machine: Melegari S.p.A Fill Jet 20/20/4 Labeling mac ...