powder line used for sale

for mechanical grape harvesting and manual grape harvesting - Machine capacity: 40 - 70 to/h - Last harvest processed: 2023! - Line in very good condition! Line 1 consisting of: 1 acceptance funnel 1 Armbruster destemmer with 40 - 70 to/h 1 weighing hopper, capacity: 3.5 tons 4 pumps with hopper, approx. 12.5 m3 capacity Grapes Dosing Receiving Hopper ARMBRUSTER - Year of construction 2004 - Capacity: approx. 3300 l - Material: Stainless steel DIN 1.4301 / AISI 304 - Dimensions: 2600 x 1600 x 1250 mm - Screw conveyor: DN 400 - Motor: 4 kW, 400 V / 50 Hz - With flat gate valve in stainless steel DN 400 - Proximity holder for step-by-step opening of the slide valve Destemming machine ARMBRUSTER AWFS 30 - 60 - Year of construction: 2004 - Effective capacity 40-70to/h - With frequency converter - With large squeezing rollers - With pre-juicing diverter - Worki ...

for mechanical grape harvesting and manual grape harvesting - Machine capacity: 40 - 70 to/h - Last harvest processed: 2023! - Line in very good condition! Line 2 consisting of: 1 acceptance funnel 1 Armbruster destemmer 40 - 70 to/h 1 weighing hopper, capacity: 3.5 tons 4 pumps with hopper, approx. 8 m3 capacity Grapes Dosing Receiving Hopper ARMBRUSTER - Year of construction 2001 - Capacity: approx. 3500 l - Material: Stainless steel DIN 1.4301 / AISI 304 - Dimensions: 2950 x 1660 x 1000 mm - Screw conveyor: DN 400 - Motor: 4 kW, 400 V / 50 Hz - With flat gate valve in stainless steel DN 400 - Proximity holder for step-by-step opening of the slide valve Destemming machine ARMBRUSTER AWFS 30 - 60 - Year of construction: 2001 - Effective capacity 40-70to/h - With frequency converter - With large squeezing rollers - With pre-juicing diverter - Working princ ...

Technical data PaperSpike 2 G: Manufacturer Grumbach und Petermann GmbH Type 2500 Year of construction 2019 Dimensions accelerator belt 3,000 x 2,980 x 600 mm (l x w x h) Weight 1,100 kg Dimensions PaperSpike sorting unit 2,480 x 2,982 x 1,805 mm (l x w x h) Weight 3,100 kg Dimensions PaperSpike 2G complete 5,450 x 3,480 x 1,805 mm (l x w x h) Weight 4,600 kg Dimensions paper discharge conveyor 3,400 x 1,200 x 650 mm (l x w x h) Weight 400 kg Electrical equipment of the entire system: Voltage 380 - 420 V Connected load 9.5 kW Current consumption 20.34 A Operating principle: The material is fed in as dry and thin a layer as possible, preferably a monolayer, evenly over the entire width on the accelerator belt. The sorting roller with the spikes pulls the mixed paper from the chute, while cardboard boxes are impaled and held by the spikes. Material (paper) with low stiffness (newspapers, m ...

VOORTMAN V630 + HS540 beam drill line was built in the Netherlands. An easy-to-use machine with wide machining capabilities, allows to significantly increase the productivity of any industrial plant by fully automatic drilling, countersinking and threading of metal workpieces. All of this while maintaining low operating costs, high productivity and excellent precision. The VOORTMAN V630/1000A beam drilling machine consists of the following parts: – VOORTMAN V630 drilling unit – PEHAKA HS 540/1100 GBS band saw – roller conveyor The production line uses top-quality components from renowned brands to reduce size deviation tolerances and improve the quality of the final product. These include among others drilling heads with automatic 6-position tool changers for drills for various types of workshop work. During machining, the profile is fed to and from the workstation on a sp ...

Bandwidth.. 1,500 mm Band thickness. 0.7 - 4.0 mm Coil weight... 20 to. Velocity 14 m/min. Working direction right/left

Bandwidth.. 870 mm Band thickness 0.2-3.0 mm Coil weight 10 to. Coil ID Unwinder... 400/508/750 mm Coil ADBewinder.. 1,500 mm Cutting performance. 110 N/mm2 Velocity 120 m/min.

Glass line consists of following machines: Bulk glass depalletiser BERCHI Rinser WAP with 60 grippers New bottle detector KRONES Lineatronic Pressure filler SIMONAZZI 80 fillers Crowner @ 20 Screw capper @ 10 Premix SIMONAZZI Cluster machine SMI Traypacker SMI Palletiser BERCHI Pallet wrapper Bottle conveyors Pack conveyors Pallet transport

Gottfert blown film extraction unit

automatic case erector + case sealer T-100 BDE, case sealer T-10 year 1999, pallet loader PD-120, Thermal ink jet system Diagraph IJ 3000 ES autmatic erecting station + carton seamer T-100 BDE, carton sealer T-10 year of construction 1999, Layer palletizer PD-120, Thermal ink jet system Diagraph IJ 3000 ES

Available a complete dehulling line for oats, also efficient on spelt, sunflower seeds..output according technical notice about 3 tonnes per hour..Include all the machines in very good condition very very affordable price..Machines are like new.. list of machine available upon request request wellcome delivery to any destination possible.

Pivatic perforating and bendingline Line is manufactured 1999 and it has worked very well for us 20 years. Line is bending line with perforation unit and single press unit 35 tn. In line is separate punching unit so you can perforate material and cut it to separate ballet. Also you can use separate press toll in line. This press unit we have not used, because we other presses. FORSTNER coil cradle Weingarten Decoiler Dimeco Coil feeding line decoiler - straightener feeder Automatic Flexible punching and rollforming line for C and sigma profiles with centralized adjustment”, from Dimeco (Spain), installed/commissioned in 2019 Dimeco Coil feeding line PIVATIC coil punching line FIMI Slit Coil Decoiler and reel winder tunçman Extrusion - Single screw extruder LEMO INTERMAT Thermoforming - Automatic Roll-Fed Machine Uhlmann Blister machine Accela-Cota 170 l Tablet c ...

TUBULAR radiator in alluminium that can be used at 30bar. Complete line. We have a full production line for radiators to sell. We want to sell all the line, not a single machine. Inattached also the final product, radiators in alluminium in 3 difefrent measures and different hight.

Pivatic perforating and bendingline Line is manufactured 1999 and it has worked very well for us 20 years. Line is bending line with perforation unit and single press unit 35 tn. In line is separate punching unit so you can perforate material and cut it to separate ballet. Also you can use separate press toll in line. This press unit we have not used, because we other presses. FORSTNER coil cradle Weingarten Decoiler Dimeco Coil feeding line decoiler - straightener feeder Automatic Flexible punching and rollforming line for C and sigma profiles with centralized adjustment”, from Dimeco (Spain), installed/commissioned in 2019 Dimeco Coil feeding line PIVATIC coil punching line FIMI Slit Coil Decoiler and reel winder tunçman Extrusion - Single screw extruder LEMO INTERMAT Thermoforming - Automatic Roll-Fed Machine Uhlmann Blister machine Accela-Cota 170 l Tablet c ...

Venjakob year of manufacture 1999 Spray guns 4 Water based paint and lacquer and also UV paint acid curing paint? – Not possible now, but can be done, if we change pump, tubes and nozzles Paint recycling - yes Is it possible to apply bets”? Water based? – yes, water based Are the work pieces stackable directly after they come out from the line? (Are they dry so they can be stacked?) – Yes, if we use UV- water based paint but when using normal water based paint or lacquer components must be dried in a shelf What type of products do you run in the line? What materials? – MDF, melamine surfaced doors, components etc. and solid wood components (mainly birch) What are the dimension limitations for the work pieces? – width min/max 20-1200 mm, lenght min/max 350-2750 mm, thickness max 50 mm Spraying machine Venjaob HGS-Duo Venjakob VEN SPRAY DUO Lacquering line sand paint IR UV dry ...

Storti PS 430 medium-size wood cutting line - Italian production - max length of wood 6000 mm - minimum length of wood 2000 mm - wood diameter min / max 100 / 350 mm TECHNICAL PARAMETERS: 1. CUTTING THE PRISM PGS 2004 circular saw Minimum log length 1000 mm. Maximum log length 6000 mm. Maximum log diameter 350 mm. Minimum log diameter 100 mm. Maximum ground clearance 400 mm. Disc diameter 600 mm. Saw hole diameter 40 mm. Saw blade speed 2000/2500 RPM Feed speed 4-35 m/1 min. Spindle motor power 2X37 2X44 KW The opening and closing power of the saw blades is 0.75 KW Log feeding power 4 KW Number of programmable memories for cutting sizes - 9 TGS 84 V double crosscut saw Maximum board width 350 mm. Minimum board width 100 mm. Minimum board height 40 mm. Maximum board height 200 mm. Feeding engine power 0.75 KW Feeding speed 42 m/1 min. Minimum cutting leng ...

Available in stock 1 x Used Fitting and removing device for cylinder liner. The tool was used for MAN engines. The tool is used but in good working conditions.

Laief GSL-14-12 Grigoli stick line Serial: PP-11-2018 2019, Max mechanical speed 25, number of wide 12, capacity 12/30,000, row of moulds 130, cooling CaCI2, brine holding capacity 5,000L, liquid refrigerant Freon or NH3, defrosting steam, main drive movement full servo, comes with button up fill, volumetric filler for BU, volumetric fruit filler, volumetric microfiller, 3 x volumetric fillers, flt sick inserter, round stick inserter, chewing gum stick inserter, intermedial extraction, product saving unit, 200Kg chocolate tank, chocolate dipping tank, NH3 Evaporator 200Kw, 4 sets of moulds, catwalk gantry, ask for further spec, total cost brand new £1,120,300

Veneer peeling plant RFR – Keller - Centering basement GZB - Peeling machine RFR Type 9 PA 23 max. clamping length 2300 mm Clamping diameter up to max. 1000 mm, peels down to 95 mm Right telescopic spindle new in 1986/1987 for 100,000 DM including waste gutter with extra intermediate trestles for shorter parts 55 kW DC motor infinitely variable Powered by diesel generator 69 kW Consumes less than 200 ltr./week at 8 hours a day/ 5 days a week - Automatic rewinding with magazine from cellar to width 1350 mm - Automatic processing cellar - Scanner length 2400 mm - Veneer clipper Keller working length 2400 mm - Self-made stacking Dimensions of the entire line: 26 m long x 4 m wide

Used croissant line CIM -In bakery condition- - Dough sheeting machine - Cutting station - Winding unit - For unfilled croissants Visits and test runs are possible by arrangement.

Used bread line W&P -Refurbished- 1) Haton CR-59 Kegerundwirker, heated, lubrication, frequency control, automatic slide 2) Haton AF 2002 proofer, fully automated, digital control 3) Conveyor belt 4) Haton Combi U long roller table, very flexible 5) By-Pass tape to bypass the proofer, directly to the Combi U long roller The entire line is completely overhauled and in perfect condition! Warranty 6 months Please note: The V-300 dough divider is not part of this offer as it is already sold! Alternatively, a RHEON VX 202 Twin Divider can be offered for high-quality Artisan products.

Description: Voltage 3 V DC, wavelength 650 nm Approx. Onsite Dimension. (l x w x h): 530 x 300 x 100 mm, weight approx.: 2 kg

Description: Voltage 3 V DC, wavelength 650 nm Approx. Onsite Dimension. (l x w x h): 530 x 300 x 100 mm, weight approx.: 2 kg

H.E.F. HEF DURFERRIT salt bath nitriding line was built in 2001. This highly advanced production line makes it possible to improve the mechanical properties of the workpiece by increasing its strength and resistance to wear and corrosion. To achieve this, the workpieces undergo thermo-chemical treatment in the form of salt bath nitriding, which results in an anthracite or black colour and a surface hardness of up to 1300 HV. The H.E.F. HEF DURFERRIT thermo-chemical treatment line has been continuously serviced and upgraded throughout its service life. About 2.5 years ago, the lining and heaters were overhauled and the main nitriding ladle was replaced. It is also possible to purchase a new spare main ladle for the offered machine at an additional cost. The production line includes: – a ladle for washing/rinsing workpieces (3 pcs.) – plunge pre-heating furnace – SURSULF nit ...

Ball bearing linear guide with 3 carriages, SHS55LC3DDHHC0-1140LP, THK, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. Attention: We have many, in stock, high quality ball screws, sychron motors and linear guides in various designs. Please have a look at our website of IPV GmbH. Linear guide with ball chain type SHS55LC3DDHHC0-1140LP from THK consisting of: -1 pc. Guide rail 55mm x 1140mm long - 3 pcs. Carriage SHS55LC Function guarantee! For second hand parts, we can not provide conventional warranty and guarantee. However, we give you a functional guarantee. If the device does not work in the course of commissioning, you can return the goods and we will refund the purchase price.

Ball-bearing linear guide with 2 carriages, MR55-A2-1244-22-22-G1-V3-GP, Schneeberger, as good as new As good as new in original packaging! The high-quality part comes from a spare parts warehouse of a mechanical processing of a large automobile manufacturer, has been in stock for some time, is completely new and in the original packaging. Attention: We have many, bearing, high-quality ball screws, synchronous motors and linear guides in different designs. Take a look at our website of IPV GmbH. Linear guide with ball chain type MR55-A2-1244-22-22-G1-V3-GP of Schneeberger consisting of: -1 guide rail 55mm x 1244mm long - 2 pcs. guide car MR55-A2 Functional guarantee! For second-hand parts, we cannot provide a conventional guarantee and warranty. However, we give you a functional guarantee. If the device does not work during commissioning, you can return the goods and we ...

Used UHT Line made in 1999. Steriliser, Homogeniser, milk bag filler 2500 L/h Used sterilization and aseptic packaging line Year of production 1999 1. Elecster Twin 2500 L/h sterilizer (with homogenizer) Note: Damaged sterilizer controller Manufacturer: Toomo Halogen Oy SF-3781 Toijala, Finland Technical data: 120kVA power supply power consumption for heating 54 kJ/kg total power consumption 81 kJ/kg compressed air min 6 bar water – pressure 2 – 4 bar water temperature 5 - 10°C cooling water consumption depending on capacity: homogenizer cooling approx. 100 L/h, cable connection cooling approx. 100 L/h capacity: 1000-2500l/h sterilization temperature 140°C homogenization temperature 65°C homogenization pressure: 120-150bar dimensions: - occupied area 2300x2000 mm (device 700x1200 mm; homogenizer 800x2600 mm) - height 2700 mm - weight: sterilizer 3000 kg, ho ...

Cut-to-length line Auxmet strip line Unwinding reel for max 4to coil weight Bandwidth 50-1000mm Material thickness 0.5-3mm at 600N/mm2 Line speed 60m/min Number of stripes 1-11 Reel reel up to 4to coil weight with foiling unit without knife with retrofitted photoelectric sensors The offer is aimed exclusively at traders within the meaning of §14 BGB

Description

Description CEEVER MOLD WASHING / DEGREASER MACHINE PLATFORM CAPACITY 500Kg BASKET SIZE 850 X 850 mm USEFUL HEIGHT 580 mm TANK CAPACITY 530 l SPRAYING PRESSURE 3 bar POWER SUPPLY 400 V CONSUMPTION WITH HEATING 17kW

Used Koppens forming, buttering and predusting line is a great solution for every production plant who is specialized in making meat burgers. The line consists of Koppens VM 600HD EasyFormer, Koppens ERT 600 wetcoater with mixer and Koppens Optiflour preduster. The complete line allows to form meat burgers and cover it with coating both wet and dry (flour/flour with spices) Belt width: 600mm Efficiency: up to 50 strokes/min

Description Compounder ZSK 30 Screw diamater 30 Used to produce lead for pencil Approximative production 30 kg/h ABB motor 7,5 kW Cabinet with ABB multidrive inverter ACS 600

Description Single-oven smooth PVC pipe belling machine Possibility to process from 100 to 500mm diameters Tolling for diamters 400 mm and 500mm

Description Winder with rolls extractor

Description TWIN HELIX EXTRUDER BATTENFELD GLOENCO Screw Diameter 90 mm L/D 30 Automatic Sreen Changer NORDSON EH-35 Produced Material PP & PE

Description TWIN HELIX EXTRUDER BATTENFELD GLOENCO Screw Diameter 90 mm L/D 30 Automatic Sreen Changer NORDSON EH-35 Produced Material PP & PE

Texture application machine SORBINI T20-3 STP Сharacteristic Length, mm - 6300 Width, mm - 2500 Working width, mm - 1200 Height, mm - 1700 Number of nodes, pcs - 3 Number of shafts, pcs - 6 Total power of engines, kW - 13,50

Easiweigh Limited linear weigher, 2 lanes, type: DUET, serial number: 040895, year of construction: 2004, dimensions: 1340 mm x 800 mm x 770 mm.

Ravenwood Packaging LTD linerless label applicator, model: Nobac, serial number: 0659, year of construction: 2012, 220/240 V, 1 Ph, 50/60 Hz, 11 A, plastic belt, belt width: 170 mm, total dimensions: 1400 mm x 1000 mm x 1600 mm.

Ishida linear weigher with s/s platform, model: CCW-NZ-108B-S/20/WP-BE, number: 50384, year of construction: 2007, 230 V, 1 Ph, 50 Hz, 5.8 A, 8 lanes, dimensions weigher: 2000 mm x 1000 mm x 1600 mm, working height s/s platform: 2100 mm, total dimensions: 3600 mm x 2020 mm x 3170 mm. Incomplete.

Ravenwood Packaging LTD linerless label applicator, model: Nobac, serial number: 0660, year of construction: 2012, 220/240 V, 1 Ph, 50/60 Hz, 11 A, plastic belt, belt width: 170 mm, total dimensions: 1400 mm x 1000 mm x 1600 mm.

JUICE PROCESS PLANT

Description: Voltage 3 V DC, wavelength 650 nm Approx. Onsite Dimension. (l x w x h): 530 x 300 x 100 mm, weight approx.: 2 kg

Description: Voltage 3 V DC, wavelength 650 nm Approx. Onsite Dimension. (l x w x h): 530 x 300 x 100 mm, weight approx.: 2 kg

Description: Voltage 3 V DC, wavelength 650 nm Approx. Onsite Dimension. (l x w x h): 530 x 300 x 100 mm, weight approx.: 2 kg

Townsend mobile linking and hanging line consisting of: Townsend linking machine: Linkmaster Mark 111-3A, dimensions linking machine: 2900 mm x 700 mm x 1870 mm and mobile hanging machine, dimensions hanging machine: 3300 mm x 750 mm x 1350 mm.

Handtmann mobile hanging line, type: 220-16, number: 1116, year of construction: 2002, dimensions: 2500 mm x 700 mm x 1500 mm.

Sulzer METCO Plasma Coating Plant for cylinder block and cylinder head, YOM 2002 New price: ? 16-20 mio

ZEMAN corrugator production line Line for the production of corrugator ZEMAN VEB 1500x16000-T, production in Austria, working, taken out of service. year of production 2006. cost is negotiable.

Extruder for the production of three-layer LDPE film, German company Kifell. Capacity -150 kg/h. Foil thickness 0.03 - 0.2 mm. Width of upper rollers 1500 mm. Dolici double-sided winder 1230 mm. The width of the mouthpiece is 70 mm. Year of production 1985, in continuous production since 2010, available for viewing and testing in our company.