powder line used for sale

GeneralHSC-Precision Centre - Active chiller for main spindle and linear drives - Active chiller for electrical cabinet - Direct absolute measuring system with air purge - Coolant-airblast changeover - MPC (Machine Protection Control); Control: CELOS X with HEIDENHAIN TNC7 Technical DataSpindle taperHSK-E 50 Feed rate longitudinal/transverse/vertical1-80000/1-80000/1-80000 mm/minRapid traverse longitudinal/transverse/vertical80/80/80 m/minWorking area 1Longitudinal450 mmCross580 mmVertical460 mmTool changerApplicationVertical Type of magazineChain Type of gripperDouble gripper Number of tools60 Special equipmentFischer spindle 40,000 rpm with wave cooling 5-axis design Tool magazine 60 places HSK-E50 Production package high chip volume with IKZ (chip conveyor, rinsing gun, rotating viewing panel, AR flushing, IKZ 40 bar/600 1) Oil Mist Separator AFS BlowinSpecial equipmentPreparation aut ...

Key data: 640 mm, 600 mm, 500 mm

CNC Vertical Machining Center DECKEL MAHO DMC 64 V linear With track control Heidenhain iTNC 530 Year of Make: 2004 Travel: X 640 Y 600 Z 500 Speed range: 0 – 12,000 rpm infinitely variable With the following accessories: Rigid angle table 850 mm x 600 mm clamping surface Vertical tool changer with 30 magazine positions 3D Probe Renishaw Electronic handwheel Full protection cabin with sliding doors and interior lighting Operating mode 3 + 4 IKZ 40 bar Chip conveyor Swarf Spray Gun Spiral chip auger Coolant Setup 3 Height Adjustable Machine Shoes Operating instructions

x-travel: 2500 mm y-travel: 920 mm z-travel: 820 mm Control: Heidenhain iTNC 530 table surface area: 3100 x 900 mm table load: 3,0 t tool taper: HSK-A63 spindle turning speed range: 20 - 18000 U/min rapid traverse: (X,Y,Z) 100 / 60 / 60 m/min main drive: (S1/S6) 35 / 25 kW total power requirement: 92 kVA weight of the machine ca.: 25,6 t dimensions of the machine ca.: 10,3 x 6,2 x 3,3 m Operating hours: 113520 h Total spindle hours: 58190 h (date: 3rd September 2026) In April 2026, a new milling spindle from DMG-MORI was installed. Since then only 25 running hours ! 4-axes controlled CNC control HEIDENHAIN iTNC 530 Autom. swivel-type milling head (B-axis) +/- 105 deg. 120-station ATC Chip conveyor Tool measuring device (laser) Electronic handwheel Control cabinet with air conditioning Machine will be sold without clamping devices, vise, and tools. The data for this ad was creat ...

TBA 19 20 V 125 Slim complete line in excellent condition. PLC upgraded to RX3i TSA 21 2003 Multi Shrink Carton Sealer Manual Conveyor Hours: 68632

TBA 19 200 slim line with HI kit was producing 180 ML Hours 65238 PLC upgraded to RX3i TSA 21 2004 Multishrink Conveyors

Main tent approx. 2,145 m². Modular aluminium system, longitudinal grid approx. 5.00 m. In addition, according to the test book, free-standing porch/canopy construction with open gable, 10 m or 15 m deep; their additional area is deliberately not included in the reference area. Own test book; approval extended until 2028 according to the current state of documents.

Main tent approx. 1,815 m². Separately usable LOSBERGER system with modular aluminium system and approx. 5.00 m longitudinal grid. Also with 10 m or 15 m deep porch/canopy construction with open gable according to documents; additional area not included in the reference area. Own test book; approval extended until 2028 according to the current state of documents.

Used machine DMU 40eVo linear Machine Type: CNC 5-Axis Milling Center Model: DMU 40eVo linear Manufacturer: DMGMORI Control:CELOS Siemens 840D sl Operate Year of Make: 2022 #001431 Location: Germany Technical data Travel range X-axis approx. 400 mm Y-axis approx. 400 mm Z-axis approx. 375 mm C-axis 360° B-axis -5/+110 ° Workpiece diameter approx. 450 mm Workpiece weight max. approx. 250 kg Speed max. approx. 20,000 rpm Spindle motor approx. 35/25 KW Number of tool positions approx. 120 Rapid traverse approx. 80 m/min Pick-up taper approx. HSK63 Additional axles approx. 2 4th/5th Compressed air bar,L/min approx. 5, 300 bar,L/min Power consumption approx. 32 kVA Footprint L x W x H approx. 2.05x2.85x2.53 m (without pallet pool) Machine weight approx. 7,500 kg Facilities Dynamic Package for DMU 40 eVo linear - Motor Spindle speedMASTER® HSK-A63 RPM 20-20,0 ...

The machine is in good technical condition; testing is possible by prior arrangement. A probe is included.

Horizon VAC 100 Booklet maker Line with Pressing Unit Age: 2000-2007 Format: 35 x 50 cm Equipment: Hohner stitching heads 1x VAC 100-a Air suction collator (2000) 1x SPF 20A Stitching and Folding unit (2007) 1x Desta BAS 500-16 Booklet pressing Unit (2001) 1x FC-20 Fore Edge Trimmer (2007) Machine in good condition

Horizon VAC 100 Booklet maker Line 20 stations Age: 2000 Format: 35 x 50 cm Equipment: Hohner stitching heads 1x VAC 100-a Air suction collator 1x Vac 100-c Air suction collator 1x ST-40 Stacker Receiving Tray 1x SPF 20 Stitching and Folding unit 1x FC-20 Fore Edge Trimmer 1x PK-20 Preset Kicker 1x LC-20 Long Conveyor 1x PJ-77 Jogger Receiving Tray Machine in good condition

GeneralPrecision centre - Linear drive package - Active cooling for spindle, linear drives and electrical cabinet - Frame temperatur control - Direct measuring system - Chiptray, coolant/airblast changing - Full cabin including 2nd door; Control: 3D-Control Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical1-80000/1-80000/1-80000 mm/minSpindle taperHSK-A 63 Rapid traverse longitudinal/transverse/vertical80/80/80 m/minWorking area 1Longitudinal650 mmCross600 mmVertical450 mmTool changerType of magazineChain Number of tools30 Type of gripperDouble gripper Floor space/WeightDimensions (L x W x H)2,92 x 2,42 x 2,88 (3,0) mWeight approx.9600 KgHSC70 5-Axis SpecificationHSC70 with 5-Axis specification clamping area Ø 600 mm // Ø 23.61 inch swivel range B-axis +20/-110°; C-axis 360° table load max. 500 kg // 1102.31 lbs absolute measuring systems incl. permanent co ...

General SKU328Y697 MakeEstrella AG No.91985 Year of construction1991 LocationBarneveld Pressure Working pressure6 Bar Number of horizontal pressure tanks1 Main Features MaterialGlass Volume4000 Ltr. Pressure6 Bar Specified Features - Pressure vessel Capacity4425 l., (4000 l.) Vessel sizesDia. 1350x3200 mm ManholeDN600 Top connectionscheck Max. temperature-10°C/+200°C MaterialGlass - Enamel (TPE-2000) General Mounted on consolescheck Floorspace1,35x3,20 m Weight2000 kgGeneric medicinesFine chemicalsOther chemicalBiotechnologyRubberPlastic & polymersPressure vesselsCatalysts & fillersOther pharmaceuticsCosmeticsAnimal feedAPINew arrivalsEstrellaIndustries > Pharmaceutical > Generic medicinesIndustries > Chemical > Fine chemicalsIndustries > Chemical > Other chemicalIndustries > Chemical > BiotechnologyIndustries > Chemical > RubberIndustries > Chemical > Plastic & ...

Schneidmaschine - Guillotine Schneider Senator SEN78 E-LINE Year 2000 - Serial-No. M-078E-004-10/30-09 Schnittbreite max. 780mm / Cutting width max. 780mm Programm - Duisplay / Program - Display Lufttisch - Chromtisch / Light guard - chrome table CE-Zeichen-Zulassung / CE Certificate Elektr. Anschluss / Power supply 3 Phase 380V - 10A Ersatzmesser / Spare knives

Semi-rotary die-cutting unit Brand: PROFILINE Model: Profi-Line R-320 Year : 2016 Speed: 90 m/min WINK cylinder is brand new and unused

Incl. chip conveyor, incl. 3-D touch probe and incl. the tool holders located in the tool changer! Attention: without the machine vises seen in the photos! Attention: the machine can be transported on a standard truck!

Year of construction: 2011 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 500 Y-axis travel mm: 450 Z-axis travel mm: 400 C-axis degrees: 360º (0,001) B-axis degrees: 0º/108º (0,001) Rapid traverse m/min: 80/50/50 Milling/turning table nc: Table dimensions mm: Ø390 Maximum workpiece size (D x H) mm: Ø630x500 Max. workpiece weight kg: 200 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 Tool system Tool holder: HSK-A 63 Tool magazine slots: 30 With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Chip-to-chip time s: 5 Equipment Chip conveyor Infrared probe Rinsing gun blowing air through spindle center selectable via M-function Signal lamp Laser tool measurement for measuring tool length and diameter Programmable coolant nozzles Heat compe ...

Impressions=0 m, Condition= Very Good , Availability= 2026-09-19, Polar 137 autotrim from 2000 , no 7093536 Pile lift , Polar Jogger Polar Trensumat TR 130EL -4 Extra knife Comperessor Top machine in good working condition

Year of construction: 2010 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 500 Y-axis travel mm: 450 Z-axis travel mm: 400 C-axis degrees: 360º (0,001) B-axis degrees: 0º/108º (0,001) Rapid traverse m/min: 80/50/50 Milling/turning table nc: Table dimensions mm: Ø390 Maximum workpiece size (D x H) mm: Ø630x500 Max. workpiece weight kg: 200 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 Tool system Tool holder: HSK-A 63 Tool magazine slots: 30 With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Chip-to-chip time s: 5 Equipment Chip conveyor Infrared probe Rinsing gun blowing air through spindle center selectable via M-function Signal lamp Laser tool measurement for measuring tool length and diameter Programmable coolant nozzles Heat comp ...

3D -Venjakob Perfect Air Jet painting line: - Manufacturer: Venjakob - Year of construction: 2013 - Working width: 1.300mm - Max. part length 6.500mm - In U -shape with angle transfer Consisting of: 1. loading belt, length 3,050mm 2. free space für Sanding machine (only optional, not included in the price) 3. spraying machine VEN SPRAY PERFECT, length 5.510mm 4. flash -off dryer OIR, length 6,000mm 5. nozzle dryer VEN DRY AIR JET, length 4,160mm 6. angle transfer 180 degrees, with nozzle dryer 7. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 8. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 9. nozzle dryer VEN DRY AIR JET, length 5.160mm 4 pcs, IR tubes 10. 3D UV dryer, VEN DRY UV, GA + HG 11. removal area, belt of the UV dryer Further information: On request

CATEGORY - 5-Axis BRAND - DMG MORI MODEL - DMU 60 EVO LINEAR WAREHOUSE NO - Z100000517 YEAR OF MANUFACTURE - 2012 CONTROL UNIT - SIEMENS AXIS TRAVELS - X 600 MM / H 500 MM / Z 500 MM ROTARY AXIS TRAVELS - B -5° / +110° / C 360° SPINDEL SPEED - 18.000 MIN/-1 HOLDER TYPE - HSK-A 63 TABLE SIZE - D 600 X 500 MM WORKPIECE WEIGHT (MAX) - 400 KG NUMBER OF PALLETS - 2 PALLETS MACHINE WEIGHT - 12.000 KG MACHINE EXTERNAL DIMENSIONS - 2.80 X 3.25 X 2.78 M

Bürstner Premio IC Line 450 – Year 2016 | 1,300 kg | 4 berths For sale is a Bürstner Premio IC Line 450, built in 2016, with a permissible gross weight of 1,300 kg and sleeping places for up to 4 people. Layout & equipment: Sleeps 4 people Comfortable seating area Bedroom with French double bed (138 × 195 cm) Sleeping area can be separated by curtain Panoramic skylight Convection heating with hot air distribution Wall units and generous storage space TV compartment with TV holder Kitchen: 3-burner gas cooker Sink with glass cover Refrigerator with freezer compartment Bathroom & Sanitary: Separate washing area with mirror Lighting / Reading Spots Storage space Wet room with Thetford chemical toilet Shower tray Additional equipment: Hot water supply Fresh water tank Fresh water filler neck Hinged windows all around Combi cassette roller ...

From a current recycling we offer you OBJECT. Year of construction 2023 Condition: good (cleaning already ordered) Original price: EUR 25.600,00 Asset Manager: Monika Stüker Phone: +49 (0) 172 2796951 Mail: m.stuekerakf.de We will be happy to provide you with details upon request. Location: 34434 Borgentreich The sale is without warranty Subject to prior sale

Key data: 685 mm, 635 mm

Circumference over bed 685 mm Turning diameter over carriage 465 mm Turning length 635 mm Speed range 5000 rpm Drive power 100/40% 25 /37 KW Weight 6500 KG CNC HEIDENHAIN Pilot BERG Chuck 12-fold SAUTER revolver VDI 40 m. WZ Tailstock hydraulic Chip conveyor 25 steel holders 8 drill rod holders 10 antr. Holder axisl u.radial

turning diameter:640 / 400 mm turning length:1500 mm control:Siemens 840 D Powerline Travel turret No.1 (milling spindle) x/y/z:550 / 180 (±90) / 1585 mm Swivle angle milling spindle (B-axis):±120° interpol. ° Rapid traverse feeds turret 1 (milling head) x/y/z:40/24/60 m/min RPM milling spindle:12000 1/min power capacity - milling spindle:12 / 23 kW Torque of milling spindle:100 Nm Tool magazine for milling spindle (turret 1):120 HSK-A 63 Tool change time tool/tool, milling spindle:1,6 s Spindle 1 RPM:4000 1/min Spindle 1 power:36/ 45 kW Spindle 1 Torque:730 Nm Spindle 1 max. bar diameter:90 Spindle 2 RPM:4000 1/min Spindle 2 power:36 / 45 kW Spindle 2 torque:730 Nm Spindle 2 max. bar diameter:90 c-axis:0,001 ° Travel turret 2 x:225 mm Travel Turret 2 z:1595 mm RPM of rotary tools turret 2:4000 1/min no. of tools in turret 2:12 VDI 40 high-pressure pump:20 bar total power requiremen ...

turning diameter:325 mm turning length:600 mm total power requirement:35 kW spindle drive:25 kW spindle turning speed range:5000 U/min speeds of tool:4500 U/min rapid traverse X-axis:60 m/min diverse toolholders:VDI 40 rapid traverse Z-axis:45 m/min weight of the machine ca.:6,5 t dimensions of the machine ca.:3,5 x 2,5 x 2,1 m Machine with SIEMENS 840 D control power line with shopturn - C and Y-axis, driven tools - bar loader IRCO ILS-RBK - coolant device with coolant throough revolving head - Revolver - counter spindle - chip conveyor - collet clamping - part catcher

pressure:600 t distance between columns:3640 mm stroke:350 mm no. of strokes:11 - 44 /min Distance table/ram, max. stroke up, adjustment up:1550 mm table surface area:3600 x 2500 mm sliding table:3600 x 2500 mm ram surface:3600 x 2500 mm Side window:2200 mm ram adjustment:400 mm material width coil line:500 - 1950 mm Material thickness at 1200 mm material width:0,6 - 2,5 mm Material thickness at 1850 mm material width:0,6 - 2,0 mm Material thickness at 1950 mm material width:0,6 - 1,75 mm Coil weight:35,0 t coil internal diameter:610 mm coil external diameter:900 - 1900 mm no. of straightening rolls:13 straightening roll diameter:50 mm Stack height:400 mm stacking dimensions - station 1+2 (L x W):150-2000 x 250-2000 mm stations:2 power requirement:112,0 + 35,0 kW Weight:390,0 t Dimensions (WxDxH):7,3 x 5,1 x 15,0 m Height above floor:9,1 m Height below floor:5,9 m clutch-/ brake combinat ...

Used line for packaging of powdery materials in plastic buckets from 2.5 kg to 10 kg. Semi-automatic line of packing and transporting the dispenser weight The line consists of: Two unloading of big bags Oblique conveyor The buffer tank Two batchers Stacking conveyor The set of the transporters with the balance cruise control, feeder lids and closing buckets, made as part of the line for packing powdery materials. The line consists of: Conveyor separator Cruising verified checkweigher Discriminator transporter odstawiaj?cym Conveyor feeder lids Crimper Stacking Conveyor Appetizer - welding machine for bags The checkweigher DWT / xx Technical data: Supply voltage - Uz = 230V Isaiah znamionowy- current = 2-5A (depending on version) Mains frequency - f = 50 Hz overcurrent - F = 10A recommended network layout -TNS Insulation class - I New 2010

Qty. 1 Second-hand Powder coil coating line on aluminium strip 1500 mm wide Mfc.: TBA Built: 1991 Coating thickness: 60 microns Revamped by OTEFAL in 2003 Powder booth changed in 2011 – GEMA Coil coater for the pre-treatment changed in 2013 Degreasing section re-built in 2010 – OTEFAL Electrical device changed in 2006 Strip width: 800 - 1500 mm Strip thickness: 0.8 – 2.0 mm A wide range of colors - over 300 different shades Capacity: 9000 tons/year in 3 shifts work 5/7 Days so 2 000 000 m² Spool dia.: 508 or 610 mm Outside coil dia.: 1500 mm Average speed: 7.5 m/min.

Qty. 1 Second-hand Electrostatic Multi Colour Powder Coating Production Line Mfc.: Gema Type: OptiFlex A2-14 Guns Built: 2013 OptiFlex A2 adjusts the air settings electronically by means of patented DVC System and monitors the production parameters continuously, resulting in a high quality coating Result. Work piece data – Aluminium Profiles Dimensions: 1800 x 400 x 6000 mm – H x W x L Conveyor speed: 2.0 m/min. One new Booth No. 2 (Mobile on rails) Magic Plus Booth” with cyclone recovery installed 2013, consisting of: Gema Electrostatic Powder Coating Equipment type OptiFlex A2 – 14 Guns With OptiFlex AS05 and OptiStar CG06 Gema Reciprocator System type ZA05-23 with carriage type XT10 for remote width positioning and outside cleaning Gema Control System type CM-30 Magic control including height recognition system Gema Quick Color change system Magic Plus with mu ...

Automatic powder coating line was built in 2018. After a test launch, it has never been used. The powder coating line is designed for the automatic powder coating of metal components with a maximum length of 1500 mm and a width of 380 mm. It enables the performance of the entire technological process, from surface preparation, through the application of powder coating, to the final curing of the coating. The preparation of workpieces for coating takes place in a three-zone chemical section with immersion tanks. There, the elements are cleaned prior to the application of the coating. The process uses demineralised water, which ensures proper surface preparation and enhances coating adhesion and durability. Transportation of parts between successive stages is performed using a Power Free overhead conveyor system with height adjustment. Powder coating takes place in KC-08 spray boo ...

Exhibition machines with guarantee. Exhibition Exchange in about 3 months ago Exhibition machines have only a few hours and are repeatedly marked by demonstrations. All from BJ. 2015 powder furnace SLS 27O Powder booth KPZ-2 p Powder hand feeding AP-300 exclusive Transport system - small Sample price - net A typical coating system consists of surface pretreatment (cleaning and / or applying a conversion layer). Intermediate drying, electrostatic coating zone (CAB / powder hand system) and dryer (Eibrennofen). The workpieces are transported by a conveyor system. Our company ROMER® plans, manufactures and assembles complete powder coating lines. Can according to your desire create an offer for an appropriate investment in the dimensions. Powder coating plant romerpp, spark (Romer Germany), we do also GEMA and Wagner powder hand equipment System can be seen in ...

Ladies and gentlemen, we are happy to offer you milk powder in different categories partially durable up to 48 months. Please send us your request. We will be happy to answer your request. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The material remains the property of the seller until f ...

Demonstration device. The system is designed to work in a closed circuit. It has two separate chambers / phases, the first chemical solution and the second with soapy water. The device is designed to minimize the effort of mixing of substances. A micro-processor controlled system allows easy operation of the unit with a user interface. Inside / work Maß 2000 B x 1500 T x 1500 H Outer dimensions 2800 B x 1600 T x 1800 H Operated electrically Voltage 380 V Power 9 kW Frequency 50-60 Hz Water pressure 60 / 160-200 bar Chemical pressure up to 15 bar Phase I chemistry circuit closed heated chemical tank Phase II water / tap water Capacity 7-10L/min Heating capacity 30 80 ° C Tank capacity 200 L Control manual / automatic Remaining warranty up to 12 months Continuously exhibition equipment on sale

Demonstration device. Powder coating plant mini - for beginners The spark / ROMER® powder coating plant mini - consists of: SLS-9 small powder furnace (Indoor: 1200x1400x1200mm - without transport system) Powder booth KPZ-2 p Powder hand plant AP 400 Shipping costs will be calculated individually. (also, pickup) Payment conditions: 30% deposit and the balance of 70% with notification of readiness for dispatch.

Demonstration device Working mass: 800 B x 500 H x 600 D External dimension: 1100 B x 1300 H x 900 T Operation: electric Heating power: 6 kW Voltage: 380V Frequency 50-60 Hz Frequency Ultrasound: 20, 5 kHz Ultrasonic power: 2.4 kW Warranty 12 months

Showroom machine Firing furnace powder furnace divisible Romer SLP-90 O D + t convection baking oven Powder furnace new SLS - 90 / O D + t Transit oven divisible Memorized 1400 wide x 2000 height x 6500 depth Dimensions 1920 wide x 2810 height x 6800 depth Electric power supply Rated power 90 kW Voltage 380V Frequency 50-60 Hz Door type: 2 doors on either side - passage oven Anti-ex Castle Warm-up time 15-30 min. (180 ° C) Uniformity & lt; ± 3 ° C, if 180 ° C Max & lt; ± 3 ° C Temperature of 230 ° C Max Transport: selectable Air circulation fan Heaters removable roof heating panels Vertical circulation Fan mounted radially on removable panels Door double two doors on two sides (Durschlaufofen) Divisible Motor 1,1 kW 6480 L capacity Warranty 12 months

Showroom machine Powder spray booth powder booth powder plant of Romer KPO-3 1 internal dimensions (mm) width x height x depth 2800 x 2100 x 1000 2 external dimensions of mm width x height x depth 2800 x 2300 x 1600 3 frequency 50 Hz 60 Hz 4 drive electric 5 mains voltage V 400 V + N + E 6 nominal output KW 2.2 7 filter polyester 8 Panel v/h/r/l right 9 filter surface M ² 22.5 10 filter holder quickly 11 filter cleaning pneumatic 12 filter cleaning type-automatic, time interval can be set. -Manually 13 fans type aluminum 14 fans number St. 1 15 doors St. / type no 16 air consumption m 3 /h 10.200 17 outdoor paint RAL 1013 18 warranty 12 months

Model SLP-15/O - available immediately! Memorized width 1200 x 1600 height x 1800 deep Dimensions 1720 width x 2410 height x 2100 deep Electric power supply Rated power 15 kW Voltage 380V Frequency 50-60 Hz Door type: 2 doors on one side Anti-ex Castle Warm-up time 15-30 min. (180 ° C) Uniformity & lt; ± 3 ° C, if 180 ° C Max & lt; ± 3 ° C Temperature of 230 ° C Max Transport: Horde carriage Air circulation fan Heaters removable roof heating panels Vertical circulation Fan mounted radially on removable panels Motor 1,1 kW 3456 L capacity Warranty 12 months GERMAN-SPEAKING CONTACT IN GERMANY JUST ASK THEM Shipping time: Immediately Shipping costs will be calculated individually. Also plants according to your wishes. More information under Romer Germany Electrostàtica pintura, pintura en pole, powder coating, Jauhemaalaus, muovijauhetta,  ...

Model SLP-15/O - available immediately! Memorized width 1200 x 1800 height x 1600 deep Dimensions 1720 width x 2610 height x 1900 depth Electric power supply Rated power 15 kW Voltage 380V Frequency 50-60 Hz Control: 7 "touch screen Door type: 2 doors on one side Anti-ex Castle Warm-up time 15-30 min. (180 ° C) Uniformity & lt; ± 3 ° C, if 180 ° C Max & lt; ± 3 ° C Temperature of 230 ° C Max Transport: Horde carriage Air circulation fan Heaters removable roof heating panels Vertical circulation Fan mounted radially on removable panels Motor 1,1 kW 3456 L capacity Warranty 12 months GERMAN-SPEAKING CONTACT IN GERMANY JUST ASK THEM Shipping time: Immediately Shipping costs will be calculated individually. Also plants according to your wishes. More information under Romer Germany Electrostàtica pintura, pintura en pole, powder coating ...

Ladies and gentlemen, We are pleased to offer you a hand bagging machine. If necessary, we can send you pictures and specifications. Please send us your request. We will be happy to answer your request. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The material remains the property of the  ...

with membrane conveying

Powder fire make: CEAG Type: PG50-ABC Content: 50 kg There are a total of 4 pcs

Power: 11 kW, 50/60 Hz 2930 rpm Connections Tri Clamp Condition very good Dimensions LWH: 1000 x 400 x 900 mm Weight: approx. 150 kg

Y.O.M.: 1995 No.: P5050781 Power: 11 kW, 50/60 Hz 2920 rpm Connections Tri Clamp Milk Pipe DN50 Condition very good Dimensions LWH: 900 x 400 x 850 mm Weight: approx. 150 kg

Y.O.M.: 2007 No.: 07071151 Power: 5.5 kW with funnel and fitting for powder very good condition with operating instructions Dimensions LWH: 950 x 460 x 1200 mm Weight: approx. 160 kg

Stock# U2308-7 Used stainless steel contact parts polish made V type tumbling blender with total volume 4500 l. Working volume 3000 l. Mixer has two inspection/feeding inlets with bolted lids, each with diameter 450 mm. Central conical discharge with diameter 245 mm, with manually operated valve. There is an internal supporting shaft/baffle inside the mixing chamber. Machine is driven by el. motor 18.5 kW, 1480 rpm, 380 V, 50 hz, through belts and gearbox type WD650. Working rotation of mixing chamber up to 8 rpm. Supporting frames and operating platform designed in carbon steel. Includes technical documentation.

Machines are still in use. Will be available soon. Pictures and technical data on request.

Key data: 220 °C, 2000 mm

PULVERBESCHICHTUNGSOFEN Verwendungszweck : Pulverbeschichtung Maximale Temperatur : 220ºC NUTZBARE INNENABMESSUNGEN Länge : 2.500mm Breite : 1.200mm Höhe : 1.800mm Material der Außenfläche : 1mm Kohlenstoffstahlblech, außen pulverbeschichtet Material der Innenfläche : 1mm verzinktes Stahlblech, nicht beschichtet Dicke der Isolierung : 150 mm Isolierung : Boden - 50 mm Steinwolle (50 kg/m³) Seiten- und Deckplatten - 150 mm Steinwolle (50 kg/m³) Wärmeübertragung : Konvektion, durch geschlossenen Luftkreislauf Heizungsart : Indirekte Heizung mit Wärmetauscher Temperaturregelung : Ein/Aus, 0-400ºC Digitaler Thermostat, Fe-Const (J-Typ) Thermokupplung Umgebungstemperatur : +10ºC (während des Betriebs) Gleichmäßigkeit des Ofens: ±2,5ºC (5ºC insgesamt) Regelgenauigkeit: ±1ºC Aufheizzeit : 25-30 min (leerer Ofen) Energiebedarf des Ofens : 30.000 kc ...

Mechanical high-efficiency automatic press Pressing force: max. 150kN Ejection force: 50kN Die support in pressing position: max. 150kN Return force of lower punch: max. 32kN Closing force of upper punch: max. 12kN Upper punch stroke: 90mm Upper punch adjusting travel: 60mm Stroke rate: 8...40strokes/min