poland used for sale

Trane CHHT0M4TKA0N092A 289.9 kW Screw Compressor | ChillerTech - Original Spare Parts! Reliability and honesty! Genuine spare parts for Trane equipment in the cooling capacity range (Qch) from 1 kW to up to +1800 kW are a guarantee of satisfaction and safety. Taking into account the access to unlimited possibilities and even a storage area of +3500 m2, it is the best choice in terms of, m.in, screw, reciprocating, centrifugal and even scroll compressors. It is worth mentioning that as ChillerTech, we provide assistance in the field of service and repair of the above-mentioned devices throughout Poland, so you do not have to worry about possible downtime, problems or even damage. It's an investment for years! A Trane CHHT0M4TKA0N092A screw compressor with a cooling capacity of 289.9 kW under nominal conditions (according to the supplier) enables us to operate highly efficiently as w ...

Robots - Wittmann W721 Year of construction: 2006 Location: Lodz, Poland 4-axis robots: 3 axes are driven by servo motors (electric); Axis C - pneumatic Travels in axes: X-550, Y-1200, Z-3000 Touch control panel The safety package for robots Robot with adapter and protective housing All offered equipment is started by our service technicians before being sold. It is possible to receive a video of the technical tests of the selected devices or to participate in live technical tests at our company in Łódź. Price: On request

Sprue picker - Wittmann WP80 Year of construction: 2016 Location: Lodz, Poland Travels in axes: X-100, Y-550, Z-90° Weight: 52 kg All offered equipment is started by our service technicians before being sold. It is possible to receive a video of the technical tests of the selected devices or to participate in live technical tests at our company in Łódź. Price: On request

Used piston press with a capacity of 5000 L / h. Manufacturer Zamet Poland. 2 pieces available. After renovation in 2014, one piece was unused and the other one was used only slightly.

Robots - Wittmann W811 Year of construction: 2010 Location: Lodz, Poland 4-axis robots: 3 axes are driven by servo motors (electric); Axis C - pneumatic Travels in axes: X-420, Y-1200, Z-2000 Touch control panel The safety package for robots Robot with adapter and protective housing All offered equipment is started by our service technicians before being sold. It is possible to receive a video of the technical tests of the selected devices or to participate in live technical tests at our company in Łódź. Price: On request

Hot runner controller - JETmulti 32 Year of construction: 2016 Location: Lodz, Poland 32 hot zones with cabling All offered equipment is started by our service technicians before being sold. It is possible to receive a video of the technical tests of the selected devices or to participate in live technical tests at our company in Łódź. Price: On request

Granulator - Shini SG-2324-CE (2 pcs.) Year of construction: 2010 Location: Lodz, Poland Slow-rotating granulator with gearbox, with cyclone and dedusting Power: 6 kW 2 stator blades, 6 rotor blades, the sieve - interchangeable Hopper inlet: 260x240 mm Grinding chamber opening: 240x240 mm Automatic feeding of the regrind to the big bag Soundproofed mill All offered equipment is started by our service technicians before being sold. It is possible to receive a video of the technical tests of the selected devices or to participate in live technical tests at our company in Łódź. Price: On request

Granulator - G15035-DT (3 pcs.) Year of construction: 2013-2014 Location: Lodz, Poland Slow-moving granulator with gearbox Power: 2.2 kW 4 stator blades, 15 rotor blades, the screen - interchangeable Hopper inlet: 390x240 mm Grinding chamber opening: 340x170 mm Hole for material case is prepared for connection with suction conveyor All offered equipment is started by our service technicians before being sold. It is possible to receive a video of the technical tests of the selected devices or to participate in live technical tests at our company in Łódź. Price: On request

Granulator - Shini SG-2336 Year of construction: 2008 Location: Lodz, Poland Slow-rotating granulator with gearbox, with cyclone and dedusting Power: 8 kW 2 stator blades, 9 rotor blades, the sieve - interchangeable Rotor and blade are cooled with water Hopper inlet: 360x270 mm Grinding chamber opening: 360x240 mm Automatic feeding of the regrind to the big bag Soundproofed mill All offered equipment is started by our service technicians before being sold. It is possible to receive a video of the technical tests of the selected devices or to participate in live technical tests at our company in Łódź. Price: On request

WaterJet KIMLA STREAMCUT 3116 build in 2017 in Poland, uses innovative waterjet cutting technology for machining among others steel, plastics and glass. Workpieces with a maximum thickness of 200 mm are cut on an easily accessible working area by the 3D head, programmed in the intuitive KIMLA software with many useful functions. The use of state-of-the-art technology combined with reliable components and a sturdy design guarantee the achievement of clean and precise edges along the entire length of the workpiece, regardless the type of machined material. During its use, the KIMLA 3116 water cutting machine was used to cut rubber using only water and underwent regular maintenance. The total weight of the machine is 2500 kg. Technical specifications of the KIMLA STREAMCUT 3116 water cutting machine - machinable materials: steel, stone, glass, plastics, tiles, etc. - work area dime ...

– after technical inspection – made in Poland –DTR TECHNICAL PARAMETERS: Log diameter max. 300 mm log length 500 - 3000 mm motor power 2 x 7.5 kW head spacing manual Feed infinitely adjustable on the inverter wheel diameter 600 mm length of belts 4004 mm Unhooking lines feeder height from the base 810 mm dimensions of the machine (length/width/height): 530 / 200 / 195 cm weight ~ 1200 kg

ECKERT JANTAR 2 plasma cutting machine was built in Poland in 2008. The 14 metre long and 4 metre wide stable frame of the machine allows for efficient cutting of large-size details while maintaining excellent precision and quality of processing. In order to ensure a high level of comfort and safety, the work table is equipped with ventilation and an extraction system for exhaust fumes into tanks and feed bags, which effectively eliminates the dust generated during cutting. The JANTAR 2 plasma cutting machine can be expanded with other elements, such as devices for cutting and processing steel pipes or welding thin metal sheets using the piezoelectric method, giving the possibility of adapting the machine to the individual needs of a production facility. In addition, the machine comes with extensive equipment, including an easy-to-use ECKERT CNC controller and FastCAM software with a  ...

3000 B CNC circular saw blade grinding machine was built in 2023 in Poland. The brand-new machine, equipped with intuitive software and a CNC controller with memory for 128 programmes, is used to sharpen the following types of circular saws, mainly used in the furniture industry for cutting laminated chipboard: – flat circular saws (GM) – alternately mitre circular saws (GS) – trapezoidal circular saws (GB) – trapezoidal-flat circular saws (GA) The 3000 B CNC circular saw sharpener allows for grinding tooth rake angles and tooth face angles in a single pass without removing the saw blade. The grinding wheel arrives at the tooth plane at two feed speeds – the slower feed increases grinding precision, while the faster one reduces sharpening time by up to half. To ensure precise feeding of the tooth under the grinding wheel, a claw feeder is used, which prevents the grindin ...

Manufacturer: HUTA ZIGMUNT, Poland Serial No. 167931/2, year of issue 1966 Dimensions LxWxH: 14340x5950x4540 mm, weight 403000 kg Basic data: Straightened sheet thickness - 12-30 mm Straightened sheet width - 3000 mm Material yield strength – 80 kg/mm2 Dressing speed - 12 m/min Working rollers: - 7pcs, f 500mm, L barrels - 3550mm Pitch between the axes of the rollers - 510mm Support rollers: - 10pcs, f500ii, L barrels - 670mm Guide rollers - 2 pieces Main drive motor: AK 112-8, 160 kW, 730 rpm. Top bed travel speed - 16.2 mm/min Bearings: working and supporting rollers - rolling The machine is reversible.

Year of production 1993. Bought in 2007 as efficient and operational, it was never launched in Poland. Stored in a dry room and secured with a tavern. Salvagnini S4 + P4 cutting and bending center P4_0387 model 2220 with configuration: TC24155F.CT.CRPD + DU2515.SF + S4.25.DF.H2.SSA.CC.P2R36.BU31.BU32.BU33.BU34.BU35.EI05.EI09.EI13.UL1 + SC115C + IMS2715.RIU + TC27155D + ASPA2420.SFE + P4-2220.RC.GPS.SFE.LSA.LIA.PB.T.DL.CLA.U29 + SPR24.POS + AIP24 + HISRS + PSMVMS + H and S4_0385 about configuration: TC24155F.CT.CRPD + DU2515.SF + S4.25.DF.H2.SSA.CC.P2R36.BU31.BU32.BU33.BU34.BU35.EI05.EI09.EI13.UL1 + SC115C + IMS2715.RIU + TC27155D + ASPA2420.SFE + P4-2220.RC.GPS.SFE.LSA.LIA.PB.T.DL.CLA.U29 + SPR24.POS + AIP24 + HISRS + PSMVMS + H P4: 2200 mm bending length, bending depth 200 mm, bending angle 125 degrees. Bending thickness 1.5 mm.

PVC injection system - Ø 50     injection weight: 540 g     clamping force: 188 kN     distance between columns: 510x470 (retractable columns)     five-point knee system     self-lubricating knee bushes     additional PE injection system     reinforced snails (bimetal)     Techamtion controller, in it m / n: memory mold settings, multi-stage pressure and injection setting     hydraulics: Rexrot variable displacement pump     T-slots on the plates     3 pull-out cores, hydraulic unscrewing device     rotameter 4 + 4     mold temperature stabilizer set     short working time - low consumption     manufacturers documentation, service in Poland

The U2PRW mitre and drill is designed for processing slats and furniture fronts made of solid wood or MDF. The machine tool operates in a semi-automatic cycle. During one cycle, the machine performs: cutting at a given angle (in the range of 45 - 90 degrees) and drilling in a jammed plane or edge of the element. – made in Poland TECHNICAL PARAMETERS: Max. height of the material to be cut: 60 mm Max. width of the material to be cut at an angle of 45° 70 mm Max. material width at 90° 150 mm Max. length of cut material 2200 mm Min. length of cut material at 45° 455 mm main saw diameter 250 or 300 mm scoring diameter 100 mm Max. bottom cutter diameter 35 mm Max. bottom milling depth 15 mm seating diameter of face drills and bottom milling cutter 10 mm Drill head (face drilling): 4 spindles spindle axial spacing 32 ; 32 ; 40 mm Linear spindle system Max. face d ...

ECKERT JANTAR 2 plasma-gas cutting machine was manufactured in Poland in 2013. The machine designed for even the most intensive and demanding workpiece machining provides excellent cutting precision, high level of safety and trouble-free operation throughout its service life. The sturdy design combined with a powerful and efficient plasma source allows for reliable cutting of workpieces with a maximum thickness of 100 mm (oxygen cutting) or 50 mm (plasma cutting). All process parameters are programmed in the intuitive ECS 872 CNC control with high-end components, which performs the machining cycles fully automatically and minimises the necessity of machine operation by the operator. Technical data of ECKERT JANTAR 2 plasma-gas cutting machine - CNC control: ECS 872 - work table dimensions (L x W): 3000 x 1500 mm - maximum sheet metal thickness (oxygen cutting): 100 mm - maximum sh ...

MOST SPEEDCUT 15/30 plasma-gas cutting machine was built in 2018 in Poland. The machine used for professional production needs, performs precision cutting of metals with a maximum weight of 4 tonnes using a fully automated torch. The torch uses a special system to protect the torch from damage, which combined with the fully galvanised, single-module design of the machine guarantees long and trouble-free operation throughout its lifetime. The SpeedCUT 15/30 CNC cutting machine weighs 1500 kg Technical specifications of MOST SPEEDCUT 15/30 plasma-gas cutting machine - work table dimensions (L x W): 3000 x 1500 mm - travel speed: 25000 mm/min - working speed: up to 10000 mm/min - Z-axis feed range: 110 mm - maximum workpiece weight: 4000 kg - table type: waterbed table (stainless steel tub) - power supply: 230 V; 50 Hz - dimensions (L x W x H): approx. 3600 x 2050 x 1650 mm - we ...

Trane CHHT0M4TKA0N092A 289.9 kW Screw Compressor | ChillerTech - Original Spare Parts Reliability and honesty! Genuine spare parts for Trane equipment in the cooling capacity range (Qch) from 1 kW to up to +1800 kW are a guarantee of satisfaction and safety. Taking into account the access to unlimited possibilities and even a storage area of +3500 m2, it is the best choice in terms of, m.in, screw, reciprocating, centrifugal and even scroll compressors. It is worth mentioning that as ChillerTech, we provide assistance in the field of service and repair of the above-mentioned devices throughout Poland, so you do not have to worry about possible downtime, problems or even damage. It's an investment for years! A Trane CHHT0M4TKA0N092A screw compressor with a cooling capacity of 289.9 kW under nominal conditions (according to the supplier) enables us to operate highly efficiently as w ...

EAGLE eVision 1530 F4.0 4kW fiber laser built in 2016 in Poland, is designed for machining sheet metal made of among others stainless steel and aluminium. The state-of-the-art 4kW fibre beam cutting technology, combined with a stable work table and a specially designed cutting head, achieves excellent dimensional and shape precision over the entire workpiece area, regardless of the cut material. The low cutting edge and small heat-affected zone additionally ensure that the workpiece geometry is not altered during machining at the edges of the material. The eVision 1530 F4.0 fiber laser is offered with equipment consisting of, among others, an intuitive BECKHOFF CNC controller and a DONALDSON TORIT DCE multi-chamber extraction system. The total weight of the machine is approximately 18000 kg. Technical specifications of the EAGLE eVision 1530 F4.0 laser cutting machine - laser power:  ...

Used Herb/Spice/Tea Leaf Sifting Sorting Separator with conveyor manufactured by Scorpion Poland. Year of manufacturing 2019. HERB / SPICE / TEA LEAF SIFTING SORTING SEPARATOR TECHNICAL DATA • efficiency (depending on the type of raw material) 2-4m³/h • drum rotation speed 40-60 rpm • rotation speed of the feeder 30 rpm • number of electric motors 2 • main drum motor power 4.0 kW • power of the feeder engine: 0.75 kW • shaft gear C 51 2/3 S3 M3L • gear with NMRV 0.75 i50 shaft • number of fractions 3 • engine speed 1400 rpm • weight 1200 kg • made of carbon steel • overall dimensions length. x width x height 3432x1206x3143mm The machine was built to work in the food industry for mixing various types of tea mixtures or spices. All machine elements that come into contact with the product are made of AISI 316L stainless steel. TECHNICA ...

MAAD HSSM 1550/1.5 folding machine which was built in Poland in 2017, is designed for folding thin steel sheets with a maximum thickness of 1.5 mm along a straight line at a specific angle. This functional machine, based on an innovative design, guarantees comfortable operation and a wide range of applications, which makes it ideal for many different industries. The MAAD segment folding machine has a clamping bar and a bending bar equipped with interchangeable segment knives of different lengths. Mounted on inbus screws, the segments are made of the highest quality steel, which ensures long-lasting operation of the machine while maintaining excellent bending parameters. After pressing a button on the control panel, the HSSM 1500/1.5 electric segment bending machine operates in automatic mode. The bending bar moves to the set angle and then returns to its initial position. The total we ...

ALUWIL ST 3000 roller blind cutting table built in Poland in 2019 (implemented in production in 2022) offers the best combination of speed and precision in cutting thick materials. The fabrics arranged on a large working area are machined by an under-top mounted cutting blade with forward and reverse feed control via ALLEN-BRADLEY touchscreen HMI panel. Once the cut is complete, the knife automatically returns to its initial setting, followed by the release of the bilateral pneumatic hold-downs that hold the fabric. The ALUWIL ST-3000 fabric cutting table is also distinguished by its highly rigid steel-aluminium construction and extensive equipment, including a feed bar, fabric end detection sensor and measuring stop. The ALUWIL cutting table weighs 380 kg. Technical data of the ALUWIL ST 3000 fabric cutting machine - work area (L x W): 2800 x 2850 mm - circular cutting blade - fab ...

ZEMAT PULSA ECO 500 impulse welding machine was built in 2019 in Poland. The compact machine with an open design is ideal for the efficient production of canopies, awnings, pergolas, roller blinds, banners, etc. The individual temperature control of the upper and lower sealing electrodes together with InvisiWELD technology produces strong, practically invisible seams with high precision. Furthermore, the operator has special hand tools at his disposal for the welding of, e.g. tabs, pockets and zippers. The ZEMAT PULSA EC semi-automatic impulse welder was implemented in production in 2023 and since then has been used for only a dozen tests. The total weight of the machine is 1800 kg. Technical specifications of the ZEMAT PULSA ECO 500 welding machine - machinable materials: PVC, vinyl, polyurethane (PU), polypropylene (PP), polyethylene (PE), rubber, acrylic, thermoplastic materials  ...

I will sell a used Dixie-Union Modular packaging machine for packaging in PA / PE film The machine is fully functional. It has been serviced and not used for years. In Poland it was used for about 4 years for packing vegetables.

Type: SAB 80 Parameters: 800 mm Manufacturer: Poland Description: The machine is in good condition. Table size: 800mm

We are an authorized SUBARU dealer in Poland, In addition, we have over 30 years of experience in the trade of cars, trucks and specialized equipment. Please visit our official sites to confirm our authenticity! gruchel.subaru.pl / mgc.pl / facebook.com/p/MGC-Auto-Centrum-Subaru-100063910875053/ = \ For sale directly from the port of Sweden Varberg, we offer a powerful Svetruck TMF 12/9 forklift truck with an unladen weight of 50 Tons and a maximum load capacity of 12t lifted up to 7.5 meters. Forklift / Reach stacker from new to one owner in the Port dealing with unloading and loading of wooden logs on ships. The price includes dismantling the stroller into parts to prepare it for transport. (Gripper separately, arm separately, carriage separate) - - We also purchased an interchangeable arm from ELME from 2004, thanks to which this trolley can be converted into a Reach  ...

This Lathe DMG CTX 310 ecoline was manufactured in the year 2011 in Poland and has 7500 spindle hours. It is equipped with a DMG SlimLine Siemens with ShopTurn control unit. The machine disposes of a detail clamping claw attached when needed for bar processing and a overlay for quick programming Shopturn. New hydraulic chuck fitted and Drive belt replaced about 1 year ago. Hydraulic oil newly replaced 7 months ago.

This FAT TUR930SMN Lathe was mande in 2017 in Poland and has only 174 production hours. It is equipped with a SIEMENS SINUMERIK 840 D control unit. The machine has a spindle speed of 700 rpm.

This DMG MORI CMX 1100 Milling machine was manufactured in the year 2018 in Poland and has 12760 production hours, of which 6252 are spindle hours. It is equipped with a DMG MORI SLIMline control unit and has 3 axis. The machine has a spindle speed of 12000 rpm.

STEP-MET NCW 1250 X 1.5 slitting line built in Poland in 2011, is used in the process of slitting thin steel sheets with a maximum thickness of 1.5 mm into equal-sized stripes. The material is slit longitudinally by high-quality cutting rollers, which guarantee the highest product quality while making optimum use of the raw material. The NCW 1250 X 1.5 slitting line consists of several modules, including, among others, an easy-to-operate control cabinet that allows adjustment of the operating speed and cutting width. The STEP-MET slitting line consists of the following components: – sheet metal decoiler – sheet metal winder – control cabinet Technical data of the STEP-MET NCW 1250 X 1.5 slitting line - maximum sheet metal thickness: 1.5 mm - maximum sheet metal width: 1250 mm - minimum sheet metal width: 25 mm - maximum sheet metal coil weight: 6 t - cutting speed ran ...

This MLM Ploter CNC Milling machine was manufactured in the year 2017 in Poland. It has 4 axis. The machine has a spindle speed of 18000 rpm.

RAFAMET KCI 320/400N CNC vertical turret lathe manufactured in 2011 in Poland, can perform complex production programmes on large-size workpieces, thanks to one turning head and three milling heads set at different angles. The machine, with its compact frame structure made of high-quality grey cast iron, is distinguished by its high geometric stability, high rigidity and excellent vibration damping. The CNC vertical turret lathe KCI 320/400N performs precision turning, milling, drilling and boring of cylindrical, conical and curved surfaces with the aid of the applied heads. One of them is a special milling head (offset), used to perform drilling and milling operations with the position of the tool axis offset from the spindle axis in a direction parallel to the slide travel plane. On the other hand, the turning head allows to mount CAPTO turning tools in horizontal and vertical socke ...

This AVIA FNE 40NC Vertical Machining centre was manufactured in the year 2007 in Poland. It is equipped with a HEIDENHAIN control unit. Contact us anytime for further questions.

This DMG MORI CMX 70U Milling machine was manufactured in the year 2022 in Poland and has 4942 production hours. It is equipped with a SIEMENS 840D Solutionline control unit. The machine disposes of a tool magazine with 30 slots, a chip conveyor with 300l tank and a cabin roof. Contact us anytime for further questions.

PLASOMAT PMS 63 CP eccentric press was manufactured in Poland. In order to meet all production requirements, the machine features a large area slider with the possibility of adjusting the height and number of strokes in the control cabinet. In addition, a stable, deformation-resistant monolithic structure combined with a high pressing force of 63 tonnes ensures the highest accuracy and precision in machining. All this makes the PMS 63 CP press the ideal choice for both small batch and high volume production. The offer includes additional equipment, consisting of among others 8 anti-vibration pads and an intermediate table. Technical specifications of the PLASOMAT PMS 63 CP press - maximum press force: 63 t (630 kN) - work table dimensions (L x W): 800 x 560 mm - number of slider strokes: 65-85/min - maximum slider stroke: 110 mm - minimum slider stroke: 8 mm - slider adjustment: ...

WJATECH WJA D096P A MA screen printing conveyor dryer built in Poland in 2020 is dedicated to the advertising industry, where efficient drying of prints on fabrics or textiles is required. Fast achievement of the right temperature and a conveyor belt with a large working space make the WJATECH screen printing dryer the best solution in this field. Technical specifications of the WJATECH WJA D096P A MA screen printing conveyor dryer - HMI panel: WEINTEK - main switch - power: 64 kW - working pressure: 6 bar - power supply: 3×400 VAC; 50 Hz - dimensions (L x W x H): 4500 x 2200 x 1700 mm - weight of machine: 900 kg

Multisaw Edger FOD DPPA-II-50-E with lasers – production in Poland – DTR – fixed sleeve - cutting height 120 mm - cutting width 500 mm - engine power 30 kW - material width max 730 mm - four types of feed speed - power of the feed motor 4 kW - spindle diameter 55 mm - sleeve diameter 90 mm - electric disc spacing adjustment - fixed edging sleeve 60 mm - one movable shield - two rows of anti-recoil pawls - three lower pulling rollers - two upper pulling rollers - two lasers - shaft support Transport dimensions: 250x165x220 cm weight ~ 2000 kg Multisaws are machines used in the wood industry mainly for cutting prisms, but not only. Machines of this type can cut boards into smaller elements and cut lamellas. The principle of their operation is very simple, the machine has a spindle located in the central point, in the horizontal axis, on which tools in t ...

Krauss Maffei KM 650 - 3500 C2 Injection molding machine Year of production - 1999 Location - Poland MC control type 4 Unit crimping Crimping force 6500 kN Tool opening force, max. 346 kN The size of the plates (height x height) 1620 x 1470 mm clearance between columns (height x height) 1000 x 930 mm mold opening path 1150 mm mold mounting height min. Opening width 540 mm 1690 mm Ejector stroke 250 mm Ejector force forward / reverse 226 kN Injection unit Screw diameter 90 mm Ls / D ratio 20 Injection pressure 1742 bar shot weight 1742 g Plasticizing flow max. 83 g / sec nozzle pressure 173 kN Electro-hydraulic devices Rated power of the pump motor 90 kW Installed heating power of 36 kW Cylinder heating control zones 7 Oil filling 1240 ltr. Dimensions and weights Space requirement approx. 9.06 x 2.85 x 2.60 m Gross weight is 30,870 kg Tool weight 11400 kg

Location: Poland Description: The machine is in good technical condition, inspection possible upon agreement. Circulating diameter . 295 mm Distance between spikes . 1000 mm.

100P2 hydraulic sandwich press, Rotary cage, Voran The device is in very good condition, ready to work without any financial contribution. Bought in 2021 from a Voran dealer in Poland as new. The set includes lids/spacers made of acacia wood and filter cloths made of polyester (two sets). The whole is kept in very good condition.

We hereby offer this used Haas Minimill HE vertical machining center from 2008, located in Poland. This vertical machining center is powered by a high-precision Haas control unit, ensuring exceptional accuracy and efficiency. With a generous working area measuring 914 x 305 mm, a rapid 6000 rpm spindle speed, and a robust 6 kW motor, the Haas Minimill HE is your ultimate choice for precision machining and top-tier manufacturing. Technical specifications: Year: 2008 Made in: USA Control unit: Haas X-Axis travel: 406 mm Y-Axis travel: 305 mm Z-Axis travel: 254 mm Table length: 914 mm Table width: 305 mm Spindle speed: 6000 rpm Spindle taper: SK 40 Motor power: 6 kW Tool magazine: 10 pieces Dimensions: Length: 2000 mm Width: 2000 mm Height: 2500 mm Weight: 2200 kg Features: -Enlarged Z axis departure by approx. 70 mm working compared to the standard Minimill versio ...

ECKERT JANTAR 2 plasma-gas cutting machine manufactured in Poland in 2007 is a combination of reliability, high efficiency and excellent precision. This versatile machine with a wide range of machining capabilities features a high-quality steel design with a length of 6000 mm and a width of 2500 mm, which maintains excellent stability even during the most intensive machining. The use of such a large work space allows the convenient loading and unloading of larger workpieces made of e.g. black steel and stainless steel. The offered ECKERT plasma cutting machine is also equipped with a powerful HYPERTHERM HPR260 plasma source with power of 260 A, a ECKERT ECS CNC controller and a head for drilling. Technical parameters of the ECKERT JANTAR 2 plasma-gas cutting machine - CNC control: ECKERT ECS - work table dimensions (L x W): 6000 x 2500 mm - drilling head - plasma torch (1 pc.) -  ...

approx. 700 gratings for pallet racks 1.05m deep, laid on - used - : Price per piece ex site: 55.- € (net)! Price for complete acceptance: 49.-€ (net) / piece! Manufacturer: unknown Type: unknown Year of manufacture: unknown Dimensions: L=1061 mm, W=894 mm Mesh size: 34.2 x 38.1 mm Frame: 40x2 mm Design: hot-dip galvanized Load capacity: 1500 kg Condition: good – very good Available: now Location: Poland

This DMG MORI M1 Vertical Machining Centre was manufactured in 2022 in Poland. This machine has 3 axes (x = 550 / y = 550 / z = 510) and is configurated as the plus version with 10,000 rpm and chip conveyor. In addition, it is equipped with a SIEMENS Sinumerik 828 D control, SK40 tool holder and comes with a DMG optical probe. Due to low spindle hours of 798 it is in a very good condition (see control unit screen in photo gallery for working hours details).

This Arburg Multilift H 720 - 3200 - 1300 Injection moulding machine was manufactured in the year 2005 in Poland and has 42878 production hours. It is equipped with an Arburg Selogica control unit. The machine has a clamping force of 3200 kN and a srew diameter of 60 mm.

Krones labeling machine, Robusta regularly serviced with documentation from Austria. Machine in Poland SUPER STATE! Well cared for! SN: 722-544, Up to 8000 bph Brand: Krones; Type: Robusta; Year of construction: 1996; Serial number: 722-544; Electrical connection: 380 V; Overall dimension L: 2300 mm; Overall dimension B: 3000 mm; Overall dimension H: 2500 mm; 2 vacuum cylinders, 3 labels, full documentation! comes from a very well-known jam and beverage factory in Austria, has always been regularly serviced! She applied the following labels: on hexagonal jars 196ml 90x122 hull, 28x45mm ride 385ml 89 x 167mm body, 75 x 50mm back 580ml 75 x 50mm (trunk and back) There are also a lot of spare parts: Spare parts package: 3 servomotors refurbished 1 servomotor new 2 plates for servomotors glue roller new small parts Clutch for the worm New value tens of t ...

Many of our machines are available from stock. Call and ask to find out more. CNC plasma cutting machine PCO-2010-D The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 1020 x 2100mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 2650 mm - Width: 1780 mm - Height: 1500 mm - Total mass: 800.0 kg - Maximum load: 800.0 kg - Adjustable support legs: 4 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Systems THC ...

Many of our machines are available from stock. Call and ask to find out more. CNC plasma cutting machine PCO-2010-D The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 1020 x 2100mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 2650 mm - Width: 1780 mm - Height: 1500 mm - Total mass: 800.0 kg - Maximum load: 800.0 kg - Adjustable support legs: 4 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Systems THC ...