pneumatic used for sale

Pneumatic cylinder, air cylinder, pneumatic ram, air ram, rotary drive, actuator, actuators, gear motor, rotary valve, pneumatic cylinder actuators -Stroke: 83 mm -Piston diameter: mm -Piston rod: 30 mm (connection thread) -Total length: mm -Total length extended: mm -Dimensions: 530/380/H380 mm -Weight: 26 kg

Clinching Unit TOX - Pneumatic-Hydro Tox Press Hydro-Pneumatic Press TOX Pressotechnik POWER PACKAGE Type CRS 03.62 Item no.: 207599.2 Year of construction approx. 2005 Pressure capacity: max. 80 kN = 8 ton Projection: 20 mm Installation height: 32 mm - built-in clinching tool - pneumatic valve for actuation - penetrating joining or clinching - To create a positive connection of 2 sheets without perforating or heating the sheets- mounted on the stand - Sold without electrical control Weight: 230 kg Comes from a production plant, sold without electrical control Delivery of a simplest electrical control , triggering via foot switch + 400,-- EUR net several TOX clinch units available; used

Clinching Unit TOX - Pneumatic-Hydro Tox Press Hydro-Pneumatic Press TOX Pressotechnik POWER PACKAGE Type: K.8.155.40.10 Item no.: 222780.10 Year of construction approx. 2005 Pressure capacity: max. 80 kN = 8 ton. Projection: 85 mm Installation height: 37 mm - Pneumatic valve for actuation - Through-joining or clinching - For creating a positive connection of 2 sheets without perforating or heating the sheets- Mounted on the stand- with the simplest electrical control, triggered by foot switch Weight: 180 kg Comes from a production plant, sold without electrical control / Sold with the simplest electrical control several TOX clinch units available; used

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, clamping cylinder -Pneumatic cylinder: double-acting, stroke 50 mm -Piston: Ø mm -Piston rod: Ø 12 mm -Number: 2x cylinders available -Price per piece -Dimensions: 115/45/H75 mm -Weight: 0.4 kg/piece

Pneumatic valve DN 300 Manufacturer: Jaudt Dosiertechnik Maschinenfabrik GmbH Type: Varioschieber FSV Opening width mm: ø 350 Height mm: 130 Max.Working temp. ° C: 80 Operating pressure MPa: 0.6-1.0 maximum operating pressure MPa: 0 Control voltage V: -. Housing: one-piece cast housing in flange version the round face with coarse good Chicane Sealing: slide sheet implementation for with Adjustable stuffing seal Pressure piece from cast aluminium alloy Blade: Stainless steel 1.4301 Slide sheet: eccentric screws galvanized Finish: Stainless steel and aluminum parts blank Grey cast iron housing painted in RAL 9006 Steel parts zinc plated, 10 & #956; m Plate made of aluminium Housing material: Cast aluminium alloy (AlSi 10 mg) shock-proof up to 5 bar Flanschbohrbild: According to DIN 2501 PN 6 Packing material: ARAMIDE (Tmax 280 ° C) Operation: pneu ...

• Stroke: 235 mm • Piston diameter: 40 mm • PPV: pneumatic damping, adjustable on both sides • Installation position: any • Twist protection by square piston rod • How it works: double-acting • Operating pressure: 0.2 - 12 bar • Ambient temperature: -40°C to 80°C • Type of fastening: with internal thread and accessories • pneumatic connection: G 1/4 • maximum torque of the twist protection: 1.1 Nm • Impact energy in the end positions: 0.2 J • Operating medium: COMPRESSED air according to ISO 8573-1:2010 [7:4:4] • Oiled operation possible (required in further operation) • Attachment to the piston rod: M 12 • Note: Goods are unpackaged but as good as new! • 6 pieces are offered, these can be purchased individually as well as in a package! The price refers to the unit price! (Changes and errors to technical data and prices reserve ...

Pneumatic multi function press Operating pressure 6-8 bar Weight 106 kg dimensions 0.70 x 0.38 x 1.05 m Comments: Multi function punch air consumption 18 l per stroke, pneumatic punching operation via foot switch tripping

Nozzle filter with pneumatic cleaning and suspended material filter used Manufacturer: Total filter area approx.m 2 Hose filter each approx.m 2 filter area with pneumatic cleaning Particulate matter filters Gea MultiClean KLH 1/1-re Floating fabric filter 6011 Filter class H11 Operating volume flow: 1000 m3/h too low operating pressure: + 2000/-5000 daPa Run-out with cell wheel lock Total dimensions approx. 2400 x 2400 x 4700 mm The filters were used in a carbon production plant. Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Stroke: 465 mm -Piston rod: Ø 25 mm -Dimensions: 235/160/H705 mm -Weight: 28 kg

2 fingers parallel external gripper, pneumatic, 52.81.3.500, FLT, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. 2 Finger Parallel External Gripper, pneumatic, 52.81.3.500 Manufacturer FLT (Fibro Läpple Technologie) Clear width closed 98mm Clear width open 122mm Gripper finger length front 60mm Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put int ...

RUIAN KODA MACHINERY punch press, built in China in 2020, was used in a production line to create film gloves rips. The machine has 3 tonnes of press force and the ability to change punches of different sizes. The total weight of the machine is 200 kg. Technical specifications of the RUIAN KODA MACHINERY pneumatic press - pressing force: 3 t - workspace (L x W): 260 x 260 mm - working stroke: 150 mm - pneumatic pressure: 0.5-0.8 MPa - power: 30 W - power supply: 220 V - total weight of the press: 200 kg

Code: 0797 Brand: VALENTINI MACCHINE - ITALY Model: 19 - 11 Pneumatic clamp desk for drawers, wooden elements , strip panels Technical data: Work table mm 1900 x 1100 Work table height mm 720 N° 4 positionable pneumatic pistons with adjustable stroke Positionable support squaring Compressed air 7 atm Overall dimensions mm 2050 x 1250 x 900 h Weight kg 850

Code: 0168 Brand: STROMAB Model: ST 3000 - CE Standard Rotating pneumatic clamping machine, suitable for planks in general, squared timbers, strips for forming panels, table tops, steps for stairs and coffin - CE Standard Motorized rotation with release pedal and handy control wheel for worktable rotation Working capacity 3000 x 1200 mm Nr. 9 pneumatic front pressers ( 3 each side) Nr. 18 vertical columns with cylinder, diameter 80 mm ( 6 each side) Nr. 3 Working stations Thrust of vertical cylinder 8 bar kg 400 Daily output (8 hours) m2 263 Mechanical safety barriers Overall dimensions : mm 4800 x 2850 x 2300 Weight kg 1100

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Type: LCDQ 20/40 -Number: 2 pieces available -Piece price: 30 euros plus VAT. -Weight: 0.3 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 25 mm -Piston diameter: mm -piston rod: 20 mm (connection M 16 x1.5 thread) -Total length: 235 mm -Total length extended: 235 mm -Air inlet and outlet: adjustable -Number: 10 pieces available -Price: per piece

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 25 mm -piston diameter: Ø 25 mm -piston rod: 10 mm (connection M 10 x 1.5 thread) -Total length: 165 mm -Total length extended: 190 mm -Air inlet and outlet: adjustable -Price: per piece -Number: 3x available -Weight: 0.3 kg

Pneumatic cylinder holder, air cylinder holder, pneumatic stamp holder, air stamp holder -Type: H - 32 -Quantity: 40 pieces available -Price: per piece -Minimum order: 3 pieces -Weight: 0.3 kg/piece

Pneumatic cylinder holder, swivel flange, air cylinder holder, pneumatic stamp holder, air stamp holder -Type: SNG-50 TN 32 970 -Number: 12 pieces available -Price: per piece -Weight: 0.3 kg/piece

Guide pneumatic cylinders, pneumatic cylinders, compact cylinders -Type: DFM-50-80-PA-GF -Weight: 5 kg

Pneumatic cylinder holder, bearing block, swivel flange, air cylinder holder, pneumatic stamp holder, air stamp holder -Type: LSN-160 -Weight: 6 kg

Pneumatic cylinder holder, swivel flange, air cylinder holder, pneumatic stamp holder, air stamp holder -Type: SNGB-160 TN34547 -Number: 2 pieces available -Price: per piece -Weight: 3.3 kg/piece

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 50 mm -piston diameter: Ø 40 mm -piston rod: 16 mm (connection M 12 x 1.25 thread) -Total length: 215 mm -Total length extended: 265 mm -Air inlet and outlet: adjustable -Number: 9 pieces available -Price: per piece -Weight: 1.4 kg/piece

Pneumatic cylinder holder, air cylinder holder, pneumatic stamp holder, air stamp holder -Type: 1 827 001 272 -Quantity: 35 pieces available -Price: per piece -Minimum order: 3 pieces -Weight: 0.2 kg/piece

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 50 mm -piston diameter: Ø 40 mm -piston rod: 16 mm (connection M 12 x 1.25 thread) -Total length: 215 mm -Total length extended: 265 mm -Air inlet and outlet: adjustable -Number: 6 pieces available -Price: per piece -Weight: 1.2 kg/piece

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 50 mm -piston diameter Ø mm -piston rod: 20 mm (connection M 16 x 1.25 thread) -Total length: 230 mm -Total length extended: 280 mm -Air inlet and outlet: adjustable -Number: 3 pieces available -Price: per piece -Weight: 1.6 kg/piece

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Type: DZF-40-125-APA-S2 -Air inlet and outlet: adjustable -Weight: 1.3 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 200 mm -Piston diameter: 32 mm -Piston rod: 12 mm (connection M 10x1.25 thread) -Total length: 330 mm -Total length extended: 530 mm -Air inlet and outlet: adjustable -Number: 5 pieces available -Price: per piece -Weight: 1 kg/piece

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 250 mm -piston diameter: 40 mm -piston rod: 16 mm (connection M 12 x 1.25 thread) -Total length: 410 mm -Total length extended: 660 mm -Air inlet and outlet: adjustable -Number: 9 pieces available -Price: per piece -Weight: 1.6kg/piece

Comp. Slide unit, pneumatic cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 50 mm -Air inlet and outlet: adjustable -Weight: 3 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 50 mm -Piston diameter: 40 mm -Piston rod: 16 mm (connection M 12 x 1.5 thread) -Total length: 215 mm -Total length extended: 265 mm -Air inlet and outlet adjustable -Number: 28 pieves -Price: per piece -Weight: 0.9 kg/piece

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 50 mm -Piston diameter: 40 mm -piston rod: 16 mm (connection M 12 x 1.25 thread) -Total length: 215 mm -Total length extended: 265 mm -Air inlet and outlet adjustable -Number: 7 pieces available -Price: per piece -Weight: 0.9 kg/piece

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Type: DZH-63-50-PPV-A-S2 -Air inlet and outlet: adjustable -Weight: 2.6 kg

Pneumatic cylinders, screw-in cylinders, round cylinders, double-acting ROMHELD 1175 - 100 Piston diameter: Ø 40 mm rod diameter: Ø 16 mm stroke: 50 mm thread: M50 x 1,00 5 Thread length: 94 mm New ! Dimension ( pneumatic cylinder ): 123 x 50 x 50 mm Dimension ( packaging ): 155 x 70 x 65 mm

Pneumatic ratchet, with torque adjustment INGERSOLL-RAND, CHARLES MAIRE BALD 3203 RD5 / 35 ( BALD3203RD5/35 ) Pmax: 6.3 bar Pmin: 4 bar Speed: 250 rpm Tool holder: 3/8 New ! Dimension ( pneumatic ratchet ): 390 x 80 x 60 mm Dimension ( packaging ): 520 x 110 x 90 mm

pneumatic power clamp POLYMATIC 14731.G40.30F.28.P483404018.4197 Clamping angle: approx. 15° Driver: 30 x 30 mm two position sensors pneumatic cylinder: JOUCOMATIC trinorm CNOMO A3700703 PCN540 A 50-C Pmax: 10 bar New ! Dimensions: 425 x 140 x 102 mm

pneumatic reciprocating engine, pneumatic motor FESTO stroke: 80 mm piston Ø approx. 250 mm rod: Ø 32 mm (inverted piston pump principle) control valve J-5/2-D3 C 151865 New Dimensions: 345 x 275 x 395 mm

Pneumatic cylinder set, short-stroke cylinder, double-acting REXROTH MECMAN PNEUMATICS 270-052-015-0 stroke: 15 mm rod diameter: Ø 10 mm pmax: 8 bar Pneumatic cylinder set consists of - 2 cylinders ! with anti-twist piston rod and two elbow fittings each with plug-in connection New Dimensions(single cylinder): 54 x 36 x 37 mm Dimensions: 60 x 80 x 40 mm

Pneumatic cylinder set, short-stroke cylinder, double-acting REXROTH MECMAN PNEUMATIK 270-052-015-0 stroke: 15 mm rod diameter: Ø 10 mm pmax: 8 bar Pneumatic cylinder set consists of - 2 cylinders ! with anti-twist piston rod and two standard fittings each with plug-in connection New Dimensions(single cylinder): 54 x 36 x 37 mm Dimensions: 60 x 80 x 40 mm

Pneumatic screwdriver, rod screwdriver, pneumatic straight screwdriver, BOSCH 0 607 454 224 ( 0607454224 ) 3,4 Nm 640 rpm 6,3 bar used, tested ! Dimensions: 245 x 45 x 35 mm

Pneumatic grinder, pneumatic straight grinder WMW Type 1508 10500 rpm Grinding wheel diameter: Ø 80 mm used, tested ! Dimensions: 500 x 80 x 80 mm

Pneumatic screwdriver, rod screwdriver, pneumatic built-in screwdriver, DEPRAG 341-328-31 bit size: Ø 6 mm x 50 mm used, tested ! Dimensions: 260 x 45 x 40 mm

pneumatic clamp, pneumatic power clamp DE-STA-CO Model 860 stroke: 55 mm rod diameter: Ø 16 mm max .10 bar Lever length: 170 mm Lever cross-section: 25 x 18 mm used, tested ! Dimensions: 300 x 120 x 65 mm

Dunkes DNA 2 Pneumatic riveting units Dunkes DNA 2 Pneumatic riveting units 20 kN 0.55 kW More items - new and used - can be found in our shop! International shipping costs on request!

Pneumatic clamp, pneumatic clamping device, spring returning PAGUS stroke: 24 mm rod diameter: Ø 30 mm with compact cylinder rod diameter: Ø 20 mm piston diameter: Ø 50 mm used, tested ! Dimensions: 330 x 85 x 110 mm

Pneumatic cylinder, standard cylinder, double-acting, 2 pieces FESTO DSNU-25-450-P-MH-R3 193991 stroke: 450 mm piston diameter: Ø 25 mm rod diameter: Ø 10 mm rod thread: M10 x 1,25, length 20 mm pmax: 10 bar New ! Dimensions ( pneumatic cylinders ): 570 x 40 x 32 mm Dimensions ( packaging ): 570 x 70 x 40 mm

AS-Interface Pneumatic Module KUHNKE AirBox 32 AirBox 32-S-SW-MO Digital inputs: 4 < >Pneumatic outputs: 2 Pressure range: 2 - 8 bar Operating voltage: 24 V DC Voltage range (digital inputs): 18 - 30 V DC Total current consumption: 200 mA used, tested ! Dimensions: 68 x 40 x 42 mm

Pneumatic cylinder, standard cylinder, double-acting, 2 pieces FESTO DSN-20-80 PPv 592R stroke: 80 mm piston diameter: Ø 20 mm rod diameter: Ø 8 mm rod thread: M8 x 1,25, length: 20 mm mounting thread: M22 x 1.5, Length: 18 mm pmax: 10 bar As good as new ! Dimensions ( pneumatic cylinder ): 570 x 40 x 32 mm Dimensions ( packaging ): 570 x 70 x 40 mm

Pneumatic control unit, manual control FESTO 1x Pneumatic controller: LRP-1/4-10 159502 Inlet pressure: max. 12 bar outlet pressure: 0.1 - 10 bar 1x roller lever valve: R-3-M5 series: M708 P used, tested ! Dimensions: 260 x 135 x 130 mm

Soft-sealing intermediate damper, butterfly valve, with pneumatic actuator EBRO ARMATUREN Z011-A DN 50 PN 16 202740/070/002 width: 47 mm material housing: GG25 material disc: stainless steel ( 1.4408 ) material shaft: stainless steel ( 1.4104 ) Material cuff: EPDM pneumatic actuator: EB4.1 syd 4535666 rotation angle: 90° torque: max. 27 Nm Control pressure: max. 6 bar New ! Dimensions: 310 x 170 x 75 mm

Pneumatic angle grinder with lever valve, pneumatic grinder SPITZNAS Type 1 1834 0010 12200 rpm Operating pressure: 6 bar Grinding wheel diameter: Ø 125 mm inner diameter: Ø 22,2 mm spindle thread: M12 x 1.75 with jaw coupling and tool lubricator used, checked! Illustration may differ ! Dimensions (without hose): 400 x 150 x 160 mm